Add a struct ovl_renamedata to group rename-related state that was
previously stored in local variables. Embedd struct renamedata directly
aligning with the vfs.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20251117-work-ovl-cred-guard-v4-33-b31603935724@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Overlayfs plucks the relevant creds from the superblock. Extend the
override_creds cleanup class I added to override_creds_ovl which uses
the ovl_override_creds() function as initialization helper. Add
with_ovl_creds() based on this new class.
Link: https://patch.msgid.link/20251117-work-ovl-cred-guard-v4-1-b31603935724@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the directory locking changes as they touch overlayfs in a
pretty substantial way and we are about to change the credential
override semantics quite substantially as well.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. The overlayfs cred guard work
depends on this.
Signed-off-by: Christian Brauner <brauner@kernel.org>
vgic_lpi_stress sends MAPTI and MAPC commands during guest GIC setup to
map interrupt events to ITT entries and collection IDs to
redistributors, respectively.
We have no guarantee that the ITS will finish handling these mapping
commands before the selftest calls KVM_SIGNAL_MSI to inject LPIs to the
guest. If LPIs are injected before ITS mapping completes, the ITS cannot
properly pass the interrupt on to the redistributor.
Fix by adding a SYNC command to the selftests ITS library, then calling
SYNC after ITS mapping to ensure mapping completes before signal_lpi()
writes to GITS_TRANSLATER.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-2-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
The selftests GIC library and tests assume that the
GICR_TYPER.Processor_number associated with a given CPU is the same as
the CPU's selftest index.
Since this assumption is not guaranteed by specification, add an assert
in gicv3_cpu_init() that validates this is true.
Signed-off-by: Maximilian Dittgen <mdittgen@amazon.de>
Link: https://msgid.link/20251119135744.68552-1-mdittgen@amazon.de
Signed-off-by: Oliver Upton <oupton@kernel.org>
Physically-allocated KVM structs aren't necessary when in VHE mode as
there's no need to share with the hyp's address space. Of course, there
can still be a performance benefit from physical allocations.
Use kvzalloc() for opportunistic physical allocations.
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://msgid.link/20251119093822.2513142-3-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
A recent change on the receiving end of vmalloc() started warning about
unsupported GFP flags passed by the caller. Nathan reports that this
warning fires in kvm_arch_alloc_vm(), owing to the fact that KVM is
passing a meaningless __GFP_HIGHMEM.
Do as the warning says and fix the code.
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/kvmarm/20251118224448.GA998046@ax162/
Acked-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Link: https://msgid.link/20251119093822.2513142-2-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
The upcoming imh_edac driver for Intel Diamond Rapids servers cannot
use skx_get_hi_lo() in skx_common to retrieve the TOHM (Top of High
Memory) and TOLM (Top of Low Memory) parameters. Instead, it obtains
these parameters within its own EDAC driver. To accommodate this,
prepare skx_set_hi_lo() to allow the driver to notify skx_common of
these parameters.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-4-qiuxu.zhuo@intel.com
The Intel EDAC library 'skx_common' maintains the Intel server EDAC device
list for {skx, i10nm}_edac drivers, which use skx_get_all_bus_mappings()
to build and retrieve the EDAC device list.
However, the upcoming Intel EDAC driver, imh_edac, for Diamond Rapids
servers is designed for memory controllers that are MMIO-based devices
rather than PCI devices. Consequently, it can't use
skx_get_all_bus_mappings() due to the absence of a PCI bus. To accommodate
this, prepare skx_get_edac_list() to enable the upcoming imh_edac driver
to obtain the EDAC device list from the skx_common library and build the
EDAC device list independently.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-3-qiuxu.zhuo@intel.com
Memory controllers in the new Intel server CPUs, such as Diamond Rapids,
are presented as MMIO-based devices rather than PCI devices.
Modify skx_register_mci() to be independent of 'pci_dev' and use a generic
'dev' of 'struct device' to prepare for support of such MMIO-based memory
controllers.
Tested-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20251119134132.2389472-2-qiuxu.zhuo@intel.com
Switch the debugfs code to use scope-based runtime PM where possible,
for consistency with other parts of the driver.
v2:
- Drop unnecessary 'ret' variables. (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-56-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Switch sysfs to use scope-based runtime power management to slightly
simplify the code.
v2:
- Drop unnecessary local variables. (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-55-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Use scope-based runtime power management in the SRIOV code for
consistency with other parts of the driver.
v2:
- Drop unnecessary 'ret' variables. (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-53-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Use scope-based runtime power management in the hwmon code for
consistency with other parts of the driver.
v2:
- Drop unnecessary 'ret' variables. (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-52-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Use scope-based runtime power management in the BO code for consistency
with other parts of the driver.
v2:
- Drop unnecessary 'ret' variable. (Gustavo)
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-50-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
