stmmac_is_jumbo_frm() returns whether the driver considers the frame
size to be a jumbo frame, and thus returns 0/1 values. This is boolean,
so convert it to return a boolean and use false/true instead. Also
convert stmmac_xmit()'s is_jumbo to be bool, which causes several
variables to be repositioned to keep it in reverse Christmas-tree
order.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIWW-0000000Ewkl-21Ia@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_is_jumbo_frm() and the is_jumbo_frm() methods take skb->len
which is an unsigned int. Avoid an implicit cast to "int" via the
method parameter and then incorrectly doing signed comparisons on
this unsigned value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIWR-0000000Ewkf-1Tdx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->sph* only have 'true' and 'false' used with them, yet they are an
int. Change their type to a bool, and rename to make their usage more
clear.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIDN-0000000Evur-2NLU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pause, Asym_Pause and Autoneg bits are not set when pl->supported is
initialized, so these link modes will not work for the fixed-link. This
leads to a TCP performance degradation issue observed on the i.MX943
platform.
The switch CPU port of i.MX943 is connected to an ENETC MAC, this link
is a fixed link and the link speed is 2.5Gbps. And one of the switch
user ports is the RGMII interface, and its link speed is 1Gbps. If the
flow-control of the fixed link is not enabled, we can easily observe
the iperf performance of TCP packets is very low. Because the inbound
rate on the CPU port is greater than the outbound rate on the user port,
the switch is prone to congestion, leading to the loss of some TCP
packets and requiring multiple retransmissions.
Solving this problem should be as simple as setting the Asym_Pause and
Pause bits. The reason why the Autoneg bit needs to be set, Russell
has gave a very good explanation in the thread [1], see below.
"As the advertising and lp_advertising bitmasks have to be non-empty,
and the swphy reports aneg capable, aneg complete, and AN enabled, then
for consistency with that state, Autoneg should be set. This is how it
was prior to the blamed commit."
Fixes: de7d3f87be ("net: phylink: Use phy_caps_lookup for fixed-link configuration")
Link: https://lore.kernel.org/aRjqLN8eQDIQfBjS@shell.armlinux.org.uk # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251117102943.1862680-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value than
expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to fix
the issue.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmkda44QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kWR1B/0XkJdjP2gH7fxnAZc2h2f3zsRQP/70Hcgr
xJy7UE7+2e6KWLzl8vcI4Oyr+7cRbtAa6AYfk2HTcIP+M2Af34kzVgLZceuAW/zr
bpyaNV7t23CcQwtY+6etGM2Nlzw6lTi/BF+EAS+rcgx5lrKJ0wpACm/1tplU3nJB
DKfumkJgQt02tgwBByXB0SXUjcntiQ/uEWm27EJvD6YTDOprt9316G+7GPRPVaOy
y0Se9dFqZ7xWP2sWWwYiSyS57fPgBSB7+XR8/bnsutib8GvA6AmYUaJdo5MavlYZ
mz3ZHmvjb0acCDgvrV564RLp23lX29WPSvHFwrlyU4v1g5pDv4dt
=tr0l
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_estimated_nr_free_pages() for soft-reserved memory
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value
than expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to
fix the issue"
* tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
Add selftests to cbo.c to verify Zicbop extension behavior, and split
the previous `--sigill` mode into two options so they can be tested
independently.
The test checks:
- That hwprobe correctly reports Zicbop presence and block size.
- That prefetch instructions execute without exception on valid and NULL
addresses when Zicbop is present.
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://patch.msgid.link/20251118162436.15485-3-zihong.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
- Add `RISCV_HWPROBE_EXT_ZICBOP` to report the presence of the
Zicbop extension.
- Add `RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE` to expose the block
size (in bytes) when Zicbop is supported.
- Update hwprobe.rst to document the new extension bit and block
size key, following the existing Zicbom/Zicboz style.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251118162436.15485-2-zihong.plct@isrc.iscas.ac.cn
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add a test case that does some basic verification of the Vector ptrace
interface. This forks a child process then using ptrace to inspect and
manipulate the v31 register of the child.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251013091318.467864-3-yongxuan.wang@sifive.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The vector regset uses the maximum possible vlen value to estimate the
.n field. But not all the hardwares support the maximum vlen. Linux
might wastes time to prepare a large memory buffer(about 2^6 pages) for
the vector regset.
The regset can only copy vector registers when the process are using
vector. Add .active callback and determine the n field of vector regset
in riscv_v_setup_ctx_cache() doesn't affect the ptrace syscall and
coredump. It can avoid oversized allocations and better matches real
hardware limits.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251013091318.467864-2-yongxuan.wang@sifive.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add RISC-V code to be compiled to allow the userspace raid6test program
to be built and run on RISC-V.
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://patch.msgid.link/20250718072711.3865118-6-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
To support userspace raid6test, this patch adds __KERNEL__ ifdef for kernel
header inclusions also userspace wrapper definitions to allow code to be
compiled in userspace.
This patch also drops the NSIZE macro, instead of using the vector length,
which can work for both kernel and user space.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://patch.msgid.link/20250718072711.3865118-5-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
To prevent the compiler from breaking the inline vector assembly code,
this code must be built without compiler support for vector.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://patch.msgid.link/20250718072711.3865118-4-zhangchunyan@iscas.ac.cn
[pjw@kernel.org: cleaned up commit message]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZAWRS,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[no_zawrs]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-5-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[legacy]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-4-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[legacy]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-3-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[no_zbb]", "nop", ...).
While we're at it, also remove bogus comment about Zbb being likely
available. We have to choose between "likely" and "unlikely" due to
limitations of the asm goto feature, but that does not mean we should
put a bad comment on why we pick "likely" over "unlikely".
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-2-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_unlikely() to check for RISCV_ISA_EXT_SVVPTC,
replacing the use of asm goto with ALTERNATIVE.
The "unlikely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("nop", "j %l[svvptc]", ...).
Note that this makes the check for RISCV_ISA_EXT_SVVPTC a runtime one if
RISCV_ALTERNATIVE=n, but it should still be worthwhile to do so given
that TLB flushes are relatively slow.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-1-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The core kernel already supports parallel bringup of secondary
CPUs (aka HOTPLUG_PARALLEL). The x86 and MIPS architectures
already use HOTPLUG_PARALLEL and ARM is also moving toward it.
On RISC-V, there is no arch specific global data accessed in the
RISC-V secondary CPU bringup path so enabling HOTPLUG_PARALLEL for
RISC-V would only require:
1) Providing RISC-V specific arch_cpuhp_kick_ap_alive()
2) Calling cpuhp_ap_sync_alive() from smp_callin()
This patch is tested natively with OpenSBI on QEMU RV64 virt machine
with 64 cores and also tested with KVM RISC-V guest with 32 VCPUs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://patch.msgid.link/20250905122512.71684-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace goto-based error handling with early return pattern in
imx_dsp_rproc_{start,stop}() functions, and simplify if-else logic.
No functional changes, only code structure improvements for better
maintainability.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-12-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy_pad(), and use kmalloc() instead of kzalloc()
because strscpy_pad() zero-pads the destination buffer and therefore
avoids writing to it twice.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251119135217.233084-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no user of enum imx_rproc_method after moved to ops based
method. Remove it.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-11-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_reset_ctr_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_RESET_CONTROLLER to manage
remote processors.
Allows the removal of the IMX_RPROC_RESET_CONTROLLER switch-case blocks
from imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and
more maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-10-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_scu_api_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_SCU_API to manage remote
processors.
Allows the removal of the IMX_RPROC_SCU_API switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-9-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The panel operated in low-power mode, with exception of changing the
brightness levels.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-11-6cd55471e84e@ixit.cz
Compatible should correspond to the panel used and the driver currently
supports only AMS628NW01 panel. Adapt the internal driver structures to
reflect the name.
Original, not very descriptive, compatible is kept to ensure compatibility
with older device-trees.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-9-6cd55471e84e@ixit.cz
Initialising at max brightness is not necessary.
Half brightness is much more comfortable.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-8-6cd55471e84e@ixit.cz
This corrects the host initialisation sequence so that we can send
DSI/DCS commands in prepare().
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-7-6cd55471e84e@ixit.cz
Introducing the macro make the code a bit clearer.
Looking at other Samsung drivers, I assume it's lvl2, thou due to not
available documentation it's only educated guess.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-6-6cd55471e84e@ixit.cz
It's not possible to send DSI panel commands in the .unprepare. Move it
to .disable and do similar for prepare, where we move the display on to
the .enable.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-5-6cd55471e84e@ixit.cz
Recently we documented, there is more than vddio regulator, adapt the
driver to work with VCI and POC regulator.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-4-6cd55471e84e@ixit.cz
Remove leftover from s6e3fc2x01 support drop and clarify supported panel.
The Samsung SOFEF00 DDIC is used in multiple phones, so describe it
properly and generalize.
Fixes: e1eb7293ab ("drm/panel: samsung-sofef00: Drop s6e3fc2x01 support")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-3-6cd55471e84e@ixit.cz
Reason for moving from simple panel is this DDIC has three supplies,
while panel-simple-dsi is limited to one.
Previous compatible only described the DDIC, but didn't include panel
connected to it. Let's fix it, and offer bindings authors two
compatibles to distinguish the connected panel.
Basic description for SOFEF00 DDIC with attached panels
- Samsung AMS601NT22 6.01 inch, 1080x2160 pixels, 18:9 ratio
- Samsung AMS628NW01 6.28 inch, 1080x2280 pixels, 19:9 ratio
There is only one user which uses samsung,sofef00 and it's updated to
comply within this patch series.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-1-6cd55471e84e@ixit.cz
Introduce imx_dsp_rproc_mmio_{start, stop, detect_mode}() helper functions
for i.MX variants using IMX_RPROC_MMIO to manage remote processors.
Allows the removal of the IMX_RPROC_MMIO switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-8-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
W552946AAA is a panel by Wanchanglong. This panel utilizes the
Ilitek ILI9881D controller.
W552946AAA is similar to W552946ABA, but the W552946AAA only
uses 2 lanes.
Tested on rk3506g-evb1-v10.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-6-kernel@airkyi.com
Like w552946aba, w552946aaa uses the Ilitek ILI9881D controller chip,
and it supports up to 2 lanes.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-2-kernel@airkyi.com
Move the imx_dsp_rproc_dcfg structure definitions closer to
imx_dsp_rproc_of_match to prepare for adding start/stop/detect_mode ops for
each i.MX variant.
Avoids the need to declare function prototypes such as
'static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)' at the
beginning of the file, improving code organization and readability.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-7-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The ronbo-rb070d30 controles the various gpios for reset, standby,
vertical and horizontal flip using the non-sleeping gpiod_set_value()
function.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-5-bf1a4cf5fa8e@solid-run.com
Add missing ref on panel-common.yaml for this dsi panel so that common
properties can be shared.
Drop reset-gpios and backlight as they are already in panel-common.
Switch from additionalProperties to unevaluatedProperties so that common
panel properties are available without repeating them in this binding.
Notably panel-common defines the "port" property for linking panels to a
source - which was missing from this panel. Mark it as required.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-2-bf1a4cf5fa8e@solid-run.com
Allow each platform to provide its own implementation of start/stop/
detect_mode operations, and prepare to eliminate the need for multiple
switch-case statements.
Improve code readability and maintainability by encapsulating
platform-specific behavior.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-6-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Abhishek Rajput <abhiraj21put@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117064702.222424-1-abhiraj21put@gmail.com
Drop extra space between return and zero.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-5-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for the Raystar RFF500F-AWH-DNN 5.0" TFT 840x480 LVDS panel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251115025827.3113790-3-festevam@gmail.com
