MTL+ platforms are supported by dpll framework remove a separate
check for hw comparison and rely solely on dpll framework
hw comparison.
Finally, all required hooks are now in place so initialize
PLL manager for MTL+ platforms and remove the redirections
to the legacy code paths from the following interfaces:
* intel_encoder::clock_enable/disable()
* intel_encoder::get_config()
* intel_dpll_funcs::get_hw_state()
* intel_ddi_update_active_dpll()
* pipe_config_pll_mismatch()
v2: Rebase on !HAS_LT_PHY check in intel_ddi_update_active_dpll()
v3: Rebase on !display->dpll.mgr check in intel_ddi_update_active_dpll()
Add check for NVL as the platform is not part of pll framework (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132859.2584452-1-mika.kahola@intel.com
Add the PLL hooks for the TBT PLL on MTL+. These are simple stubs
similarly to the TBT PLL on earlier platforms, since this PLL is always
on from the display POV - so no PLL enable/disable programming is
required as opposed to the non-TBT PLLs - and the clocks for different
link rates are enabled/disabled at a different level, via the
intel_encoder::enable_clock()/disable_clock() interface.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-32-mika.kahola@intel.com
For DDI initialization get encoder configuration for C10 and C20
chips.
v2: Get configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-31-mika.kahola@intel.com
To enable pll clock on DDI move part of the pll enabling
sequence into a ddi clock enabling function.
Simililarly, do the same for pll disabling sequence.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-30-mika.kahola@intel.com
Add .dump_hw_state function pointer for MTL+ platforms
to support dpll framework. While at it, switch to use
drm_printer structure to print hw state information.
v2: Keep debug messages on one line if they not
necessarily needed to split into two or more
lines (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-24-mika.kahola@intel.com
Add .update_dpll_ref_clks function pointer to MTL+
platforms to support dpll framework. Reuse ICL
function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-23-mika.kahola@intel.com
Add .update_active_dpll function pointer to support
dpll framework. Reuse ICL function pointer.
v2: Add check for !HAS_LT_PHY (Suraj)
v3: Remove the incorrect !HAS_LT_PHY condition and
check for existing dpll_mgr
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132830.2584422-1-mika.kahola@intel.com
Add .get_dplls function pointer for MTL+ platforms
to support dpll framework. Reuse the ICL function
pointer.
v2: Getting configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
v3: Fix comment to "eDP over TypeC" (Suraj)
Fix pll id as separate variable (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-20-mika.kahola@intel.com
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-22-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20251113150217.3030010-21-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This commit adds a pre-check in ASoC to ensure there are non-zero CPU or
codec DAIs. It also handles early failure of memory allocation for
rtd->dais by going to the cleanup path, preventing potential issues
from invalid configurations or out-of-memory situations.
Signed-off-by: jempty.liang <imntjempty@163.com>
Link: https://patch.msgid.link/20251119101116.78676-1-imntjempty@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To bring MTL+ platform aligned call and calculate PLL state
from dpll framework.
v2: Rename mtl_compute_c10phy_dpll() to mtl_compute_non_tc_phy_dpll().
The state is computed either for a C10 or on the PTL port B eDP
over TypeC PHY case for a C20 PHY PLL. Hence refer to this case as
"non_tc_phy" instead of "c10phy".
Rename mtl_compute_c20phy_dplls() to mtl_compute_tc_phy_dplls() for
symmetry with mtl_compute_non_tc_phy_dpll().
v3: Reword commit message (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-19-mika.kahola@intel.com
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20251113150217.3030010-20-andriy.shevchenko@linux.intel.com
[pmladek@suse.com: Fixed output ordering and last_read_time update.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20251113150217.3030010-19-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
While at it, fix wrong use of %ptT against struct timespec64.
It's kinda lucky that it worked just because the first member
there 64-bit and it's of time64_t type. Now with %ptS it may
be used correctly.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-18-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-17-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251113150217.3030010-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251113150217.3030010-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-8-andriy.shevchenko@linux.intel.com
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update several functions in intel_cx0_phy.c to make PLL state
management more explicit.
Changes include
* add 'const' qualifiers to intel_crtc_state parameter for
cx0 state calculation functions
* refactor C10/C20 PLL state calculations helpers to take
explicit hardware state pointers instead of directly modifying
'crtc_state->dpll_hw_state'
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-18-mika.kahola@intel.com
Start bringing MTL+ platforms as part of PLL framework.
The work is started by adding PLL information and related
function hooks.
BSpec: 55726
v2: Revise commit message and add BSpec ID (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-17-mika.kahola@intel.com
When pll's are moved to dpll framework we no longer
need Cx0 specific state verification as we can rely
on dpll state verification instead.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-16-mika.kahola@intel.com
Print all the Cx0 PLL state in the PLL state dumper.
v2: Use BUILD_BUG_ON() instead of WARN_ON() (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-15-mika.kahola@intel.com
Ensure Cx0 pll state is initialized to zero before any computation or HW
readouts, to prevent leaving some parameter in the state uninitialized
in the actual compute/HW readout functions later.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-14-mika.kahola@intel.com
The port clock is tracked in the PLL state, so there is no need to pass
it separately to __intel_cx0pll_enable(). Drop the port clock function
param accordingly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-13-mika.kahola@intel.com
The Cx0 PLL enable programming needs to know if the PLL is in DP or HDMI
mode. The PLL manager framework doesn't pass the CRTC state to the PLL's
enable hook, so prepare here for the conversion to use the PLL manager
for Cx0 PHY PLLs by determining the DP/HDMI mode from the PLL state.
For C10 PHYs use the fact that the HDMI divider value in the PLL
registers are set if and only if the PLL is in HDMI mode.
For C20 PHYs use the DP mode flag programmed to the VDR SERDES register,
which is set if and only if the PLL is in DP mode.
Assert that the above PLL/VDR SERDES register values match the DP/HDMI
mode being configured already during state computation.
This also allows dropping the is_dp param from the
__intel_cx0pll_enable() function, since it can retrieve this now from
the PLL state.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-12-mika.kahola@intel.com
Read out the C10, C20 PHY PLLs SSC enabled state, so the PLL HW/SW state
verification can check this state as well.
C10 PHY PLLs program some PLL registers zeroed out for the non-SSC case,
while programming non-zero values to the same registers for the SSC
case, so check that these PLL registers being zero or non-zero matches
the PLL's overall SSC-enabled state (stored in the
intel_c10pll_state::ssc_enabled flag).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-11-mika.kahola@intel.com
Define the C10 PLL SSC register range via macros, so the HW/SW state of
these register can be verified by a follow-up change, reusing these
macros.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-10-mika.kahola@intel.com
The Cx0 PLL enable programming requires the enabled lane count. The PLL
manager framework doesn't pass the CRTC state to the PLL's enable hook,
so prepare here for the conversion to use the PLL manager, by tracking
the enabled lane count in the PLL state as well. This has the advantage,
that the enabled lane count can be verified against the PHY/PLL's
enabled TX lanes.
This also allows dropping the lane count param from the
__intel_cx0pll_enable() function, since it can retrieve this now from
the PLL state.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-9-mika.kahola@intel.com
A follow-up change will need to retrieve the DDI port field from the
register value, add a macro for this. Make things symmetric with setting
the field in the register.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-8-mika.kahola@intel.com
Move the definitions of the
intel_c10pll_calc_port_clock()
intel_c20_get_dp_rate()
intel_c20_get_hdmi_rate()
is_hdmi_frl()
is_dp2()
intel_get_c20_custom_width()
functions earlier to avoid the forward declarations.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-7-mika.kahola@intel.com
The Cx0 PLL enable programming needs to know if the PLL is in DP or HDMI
mode. The PLL manager framework doesn't pass the CRTC state to the PLL's
enable hook, so prepare here for the conversion to use the PLL manager
for Cx0 PHY PLLs by tracking the DP/HDMI mode in the PLL state.
This change has the advantage, that the VDR HW/SW state can be verified
now.
A follow up change will convert the PLL enable function to retrieve the
DP/HDMI mode parameter from the PLL state.
This also allows dropping the is_dp and port clock params from the
intel_c20_pll_program() function, since it can retrieve these now from
the PLL state.
v2: Fix comment to under same multicomment line (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-6-mika.kahola@intel.com
A follow up change adds a computation for the C20 PLL VDR state, which
is common to both the HDMI algorithmic and DP/HDMI table based method.
To prepare for that streamline the code. The C10 counterpart would
benefit from the same change, leave that for later adding a TODO
comment.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-5-mika.kahola@intel.com
Sanitize setting the Cx0 PLL use_c10 flag during state computation and
HW readout, making sure they happen the same way in the
intel_c{10,20}pll_calc_state() and intel_c{10,20}pll_readout_hw_state()
functions.
Follow-up changes will add more state computation/HW readout, this
change prepares for those as well.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-4-mika.kahola@intel.com
Factor out functions to begin and complete C10 PHY programming
sequences to make the code more concise.
v2: Rename msgbus_update_config() to more descriptive
msg_bus_access_commit() (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-3-mika.kahola@intel.com
Commit 2f952c9e8f ("fs: split fileattr related helpers into separate
file") added various exports without users despite claiming to be a
simple refactor. Drop them again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251119101415.2732320-1-hch@lst.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace the now deprecated kmap_atomic() with kmap_local_page().
Optimize for the non-highmem cases and avoid disabling preemption and
pagefaults, the caller's context is atomic anyway, but that is irrelevant
to kmap. The memcpy itself does not require any such semantics and the
mapping would hold valid across context switches anyway. Further, highmem
is planned to to be removed[1].
[1] https://lore.kernel.org/all/4ff89b72-03ff-4447-9d21-dd6a5fe1550f@app.fastmail.com/
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20251118210706.1816303-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
