I went through all the datasheets and created this note listing
chip functions and register layouts.
Signed-off-by: Levente Révész <levente.revesz@eilabs.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20251112224924.2091880-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Due to an upcoming change in my professional situation, I will need to
start using my kernel.org address. Update all my MAINTAINERS entries.
Signed-off-by: Bartosz Golaszewski <brgl@kernel.org>
Link: https://lore.kernel.org/r/20251118121816.23018-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With the final call to fput() on a file descriptor, the release action
may be deferred and scheduled on a work queue. The reference count of
that descriptor is still zero and it must not be used. It's possible
that a GPIO change, we want to notify the user-space about, happens
AFTER the reference count on the file descriptor associated with the
character device went down to zero but BEFORE the .release() callback
was called from the workqueue and so BEFORE we unregistered from the
notifier.
Using the regular get_file() routine in this situation triggers the
following warning:
struct file::f_count incremented from zero; use-after-free condition present!
So use the get_file_active() variant that will return NULL on file
descriptors that have been or are being released.
Fixes: 40b7c49950 ("gpio: cdev: put emitting the line state events on a workqueue")
Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/all/5d605f7fc99456804911403102a4fe999a14cc85.camel@siemens.com/
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20251117-gpio-cdev-get-file-v1-1-28a16b5985b8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The .free callback cleared among others the enable bit PWENx in the
control register. When the PWM is requested later again this bit isn't
restored but the core assumes the PWM is enabled and thus skips a
request to configure the same state as before.
To fix that don't touch the hardware configuration in .free(). For
symmetry also drop .request() and configure the mode completely in
.apply().
Fixes: e5a06dc5ac ("pwm: Add BCM2835 PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251118174303.1761577-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
If a mount namespace contains autofs mounts, and they are propagation
private, and there is no namespace specific automount daemon to handle
possible automounting then attempted path resolution will loop until
MAXSYMLINKS is reached before failing causing quite a bit of noise in
the log.
Add a check for this in autofs ->d_automount() so that the VFS can
immediately return an error in this case. Since the mount is propagation
private an EPERM return seems most appropriate.
Suggested by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://patch.msgid.link/20251118024631.10854-2-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
The 'pmu' pointer cannot be NULL, as it is taken as a pointer to an array.
Remove the superfluous NULL check.
Found by Coverity: CID#1497507.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Liang Kan <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20251119091538.825307-1-jirislaby@kernel.org
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251113150217.3030010-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
A handful drivers want to print a content of the struct timespec64
in a format of %lld:%09ld. In order to make their lives easier, add
the respecting specifier directly to the printf() implementation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251113150217.3030010-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Two functions use the same specifier data for the special hex number.
Almost the same as the field width is calculated on the size of the
given type. Due to that, make a compound literal macro in order to
deduplicate the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/20251113150313.3030700-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Ensure fsync() returns -EIO when the ntfs3 filesystem is in forced
shutdown, instead of silently succeeding via generic_file_fsync().
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
During fbdev probe, the xe driver allocates and pins a framebuffer
BO (via xe_bo_create_pin_map_novm() → xe_ggtt_insert_bo()).
Without a runtime PM reference, xe_pm_runtime_get_noresume() warns about
missing outer PM protection as below:
xe 0000:03:00.0: [drm] Missing outer runtime PM protection
Acquire a runtime PM reference before framebuffer allocation to ensure
xe_ggtt_insert_bo() executes under active runtime PM context.
Changes in v2:
- Update commit message to add Fixes tag (Jani Nikula)
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6350
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Dibin Moolakadan Subrahmanian <dibin.moolakadan.subrahmanian@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251111135403.3415947-1-dibin.moolakadan.subrahmanian@intel.com
CCS copy command consist of 5-dword sequence. If vCPU halts during
save/restore operations while these sequences are being programmed,
incomplete writes can cause page faults during IGPU CCS metadata saving.
Use shadow buffer management to prevent partial write issues during CCS
operations.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251118120745.3460172-3-satyanarayana.k.v.p@intel.com
The existing sub-allocator is limited to managing a single buffer object.
This enhancement introduces shadow buffer functionality to support
scenarios requiring dual buffer management.
The changes include added shadow buffer object creation capability,
Management for both primary and shadow buffers, and appropriate locking
mechanisms for thread-safe operations.
This enables more flexible buffer allocation strategies in scenarios where
shadow buffering is required.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251118120745.3460172-2-satyanarayana.k.v.p@intel.com
When reading a metric like memory bandwidth on multiple sockets, the
additional sockets will be on CPUS > 0. Because of the affinity
reading, the counters are read on CPU 0 along with the time, then the
later sockets are read. This can lead to the later sockets having a
bandwidth larger than is possible for the period of time. To avoid
this move the reading of tool events to occur after all other events
are read.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Synthesize memory samples for SIMD operations (including Advanced SIMD,
SVE, and SME). To provide complete information, also generate data
source entries for SIMD operations.
Since memory operations are not limited to load and store, set
PERF_MEM_OP_STORE if the operation does not fall into these cases.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The other operations contain SME data processing, ASE (Advanced SIMD)
and floating-point operations. Expose these info in the records.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Report GCS related info in records.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Expose memset and memcpy related info in records.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
SVE / SME operations can be predicated or Gather load / scatter store,
save the relevant info into record.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Extended memory operations include atomic (AT), acquire/release (AR),
and exclusive (EXCL) operations. Save the relevant information
in the records.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Save MTE tag info in memory record.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Record register access info for load / store operations.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Introduce the ARM_SPE_OP_DP (data processing) macro as associated
information for SVE operations. For SVE register access, only
ARM_SPE_OP_SVE is set; for SVE data processing, both ARM_SPE_OP_SVE and
ARM_SPE_OP_DP are set together.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Consolidate operation types in a way:
(a) Extract the second-level types into separate enums.
(b) The second-level types for memory and SIMD operations are classified
by modules. E.g., an operation may relate to general register,
SIMD/FP, SVE, etc.
(c) The associated information tells details. E.g., an operation is
load or store, whether it is atomic operation, etc.
Start the enum items for the second-level types from 8 to accommodate
more entries within a 32-bit integer.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Remove unused SVE operation types. These operations will be reintroduced
in subsequent refactoring, but with a different format.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
For SME data processing, decode its Effective vector length or Tile Size
(ETS), and print out if a floating-point operation.
After:
. 00000000: 49 00 SME-OTHER ETS 1024 FP
. 00000002: b2 18 3c d7 83 00 80 ff ff VA 0xffff800083d73c18
. 0000000b: 9a 00 00 LAT 0 XLAT
. 0000000e: 43 00 DATA-SOURCE 0
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a check for other operation, which prevents any incorrectly
classifying. Parse the ASE and FP fields.
After:
. 0000002f: 48 06 OTHER ASE FP INSN-OTHER
. 00000031: b2 08 80 48 01 08 00 ff ff VA 0xffff000801488008
. 0000003a: 9a 00 00 LAT 0 XLAT
. 0000003d: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rename the macro to SPE_OP_PKT_OTHER_SUBCLASS_SVE to unify naming.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Decode a load or store from a GCS operation and the associated "common"
field.
After:
. 00000000: 49 44 LD GCS COMM
. 00000002: b2 18 3c d7 83 00 80 ff ff VA 0xffff800083d73c18
. 0000000b: 9a 00 00 LAT 0 XLAT
. 0000000e: 43 00 DATA-SOURCE 0
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Rename extended subclass and SVE/SME register access subclass, so that
the naming can be consistent cross all sub classes.
Add an log "SVE-SME-REG" for the SVE/SME register access, this is easier
for parsing.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The operation subclass is extracted from bits [7..1] of the payload.
Since bit [0] is not parsed, there is no chance to match the memset type
(0x25). As a result, the memset payload is never parsed successfully.
Instead of extracting a unified bit field, change to extract the
specific bits for each operation subclass.
Fixes: 34fb60400e ("perf arm-spe: Add raw decoding for SPEv1.3 MTE and MOPS load/store")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The new test checks that a route that has been promoted from RA-learned
to static does not switch back when a new RA message arrives. In
addition, it checks that the route is owned by RA again when the static
address is removed.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20251115095939.6967-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an IPv6 Router Advertisement (RA) is received for a prefix, the
kernel creates the corresponding on-link route with flags RTF_ADDRCONF
and RTF_PREFIX_RT configured and RTF_EXPIRES if lifetime is set.
If later a user configures a static IPv6 address on the same prefix the
kernel clears the RTF_EXPIRES flag but it doesn't clear the RTF_ADDRCONF
and RTF_PREFIX_RT. When the next RA for that prefix is received, the
kernel sees the route as RA-learned and wrongly configures back the
lifetime. This is problematic because if the route expires, the static
address won't have the corresponding on-link route.
This fix clears the RTF_ADDRCONF and RTF_PREFIX_RT flags preventing that
the lifetime is configured when the next RA arrives. If the static
address is deleted, the route becomes RA-learned again.
Fixes: 14ef37b6d0 ("ipv6: fix route lookup in addrconf_prefix_rcv()")
Reported-by: Garri Djavadyan <g.djavadyan@gmail.com>
Closes: https://lore.kernel.org/netdev/ba807d39aca5b4dcf395cc11dca61a130a52cfd3.camel@gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251115095939.6967-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: GC cleanup and optimisation.
Currently, AF_UNIX GC is triggered from close() and sendmsg()
based on the number of inflight AF_UNIX sockets.
This is because the old GC implementation had no idea of the
shape of the graph formed by SCM_RIGHTS references.
The new GC knows whether cyclic references (could) exist.
This series refines such conditions not to trigger GC unless
really needed.
====================
Link: https://patch.msgid.link/20251115020935.2643121-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_tot_inflight is a poor metric, only telling the number of
inflight AF_UNXI sockets, and we should use unix_graph_state instead.
Also, if the receiver is catching up with the passed fds, the
sender does not need to schedule GC.
GC only helps unreferenced cyclic SCM_RIGHTS references, and in
such a situation, the malicious sendmsg() will continue to call
wait_for_unix_gc() and hit the UNIX_INFLIGHT_SANE_USER condition.
Let's make only malicious users schedule GC and wait for it to
finish if a cyclic reference exists during the previous GC run.
Then, sane users will pay almost no cost for wait_for_unix_gc().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251115020935.2643121-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have been calling wait_for_unix_gc() on every sendmsg() in case
there are too many inflight AF_UNIX sockets.
This is also because the old GC implementation had poor knowledge
of the inflight sockets and had to suspect every sendmsg().
This was improved by commit d9f21b3613 ("af_unix: Try to run GC
async."), but we do not even need to call wait_for_unix_gc() if the
process is not sending AF_UNIX sockets.
The wait_for_unix_gc() call only helps when a malicious process
continues to create cyclic references, and we can detect that
in a better place and slow it down.
Let's move wait_for_unix_gc() to unix_prepare_fpl() that is called
only when AF_UNIX socket fd is passed via SCM_RIGHTS.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251115020935.2643121-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have been triggering GC on every close() if there is even one
inflight AF_UNIX socket.
This is because the old GC implementation had no idea of the graph
shape formed by SCM_RIGHTS references.
The new GC knows whether there could be a cyclic reference or not,
and we can do better.
Let's not trigger GC from close() if there is no cyclic reference
or GC is already in progress.
While at it, unix_gc() is renamed to unix_schedule_gc() as it does
not actually perform GC since commit 8b90a9f819 ("af_unix: Run
GC on only one CPU.").
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251115020935.2643121-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GC manages its state by two variables, unix_graph_maybe_cyclic
and unix_graph_grouped, both of which are set to false in the
initial state.
When an AF_UNIX socket is passed to an in-flight AF_UNIX socket,
unix_update_graph() sets unix_graph_maybe_cyclic to true and
unix_graph_grouped to false, making the next GC invocation call
unix_walk_scc() to group SCCs.
Once unix_walk_scc() finishes, sockets in the same SCC are linked
via vertex->scc_entry. Then, unix_graph_grouped is set to true
so that the following GC invocations can skip Tarjan's algorithm
and simply iterate through the list in unix_walk_scc_fast().
In addition, if we know there is at least one cyclic reference,
we set unix_graph_maybe_cyclic to true so that we do not skip GC.
So the state transitions as follows:
(unix_graph_maybe_cyclic, unix_graph_grouped)
=
(false, false) -> (true, false) -> (true, true) or (false, true)
^.______________/________________/
There is no transition to the initial state where both variables
are false.
If we consider the initial state as grouped, we can see that the
GC actually has a tristate.
Let's consolidate two variables into one enum.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251115020935.2643121-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__unix_walk_scc() and unix_walk_scc_fast() call unix_scc_cyclic()
for each SCC to check if it forms a cyclic reference, so that we
can skip GC at the following invocations in case all SCCs do not
have any cycles.
If we count the number of cyclic SCCs in __unix_walk_scc(), we can
simplify unix_walk_scc_fast() because the number of cyclic SCCs
only changes when it garbage-collects a SCC.
So, let's count cyclic SCC in __unix_walk_scc() and decrement it
in unix_walk_scc_fast() when performing garbage collection.
Note that we will use this counter in a later patch to check if a
cycle existed in the previous GC run.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251115020935.2643121-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Fix SO_PEEK_OFF bug in unix_stream_read_generic().
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM socket.
Patch 1 fixes the bug and Patch 2 adds a new selftest to cover the case.
====================
Link: https://patch.msgid.link/20251117174740.3684604-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test covers various cases to verify SO_PEEK_OFF behaviour
for all AF_UNIX socket types.
two_chunks_blocking and two_chunks_overlap_blocking reproduce
the issue mentioned in the previous patch.
Without the patch, the two tests fail:
# RUN so_peek_off.stream.two_chunks_blocking ...
# so_peek_off.c:121:two_chunks_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_blocking
not ok 3 so_peek_off.stream.two_chunks_blocking
# RUN so_peek_off.stream.two_chunks_overlap_blocking ...
# so_peek_off.c:159:two_chunks_overlap_blocking:Expected 'bbbb' == 'aaaabbbb'.
# two_chunks_overlap_blocking: Test terminated by assertion
# FAIL so_peek_off.stream.two_chunks_overlap_blocking
not ok 5 so_peek_off.stream.two_chunks_overlap_blocking
With the patch, all tests pass:
# PASSED: 15 / 15 tests passed.
# Totals: pass:15 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM
socket.
The unexpected behaviour is triggered when the peek offset is
larger than the recv queue and the thread is unblocked by new
data.
Let's assume a socket which has "aaaa" in the recv queue and
the peek offset is 4.
First, unix_stream_read_generic() reads the offset 4 and skips
the skb(s) of "aaaa" with the code below:
skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */
do {
...
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
...
skb = skb_peek_next(skb, &sk->sk_receive_queue);
if (!skb)
goto again; /* @skip is 0. */
}
The thread jumps to the 'again' label and goes to sleep since
new data has not arrived yet.
Later, new data "bbbb" unblocks the thread, and the thread jumps
to the 'redo:' label to restart the entire process from the first
skb in the recv queue.
do {
...
redo:
...
last = skb = skb_peek(&sk->sk_receive_queue);
...
again:
if (skb == NULL) {
...
timeo = unix_stream_data_wait(sk, timeo, last,
last_len, freezable);
...
goto redo; /* @skip is 0 !! */
However, the peek offset is not reset in the path.
If the buffer size is 8, recv() will return "aaaabbbb" without
skipping any data, and the final offset will be 12 (the original
offset 4 + peeked skbs' length 8).
After sleeping in unix_stream_read_generic(), we have to fetch the
peek offset again.
Let's move the redo label before mutex_lock(&u->iolock).
Fixes: 9f389e3567 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
