The conv_zones_bitmap field of struct gendisk is used to define a bitmap
to identify the conventional zones of a zoned block device. The bit for
a zone is set in this bitmap if the zone is a conventional one, that is,
if the zone type is BLK_ZONE_TYPE_CONVENTIONAL. For such zone, this
always corresponds to the zone condition BLK_ZONE_COND_NOT_WP.
In other words, conv_zones_bitmap tracks a single condition of the
zones of a zoned block device.
In preparation for tracking more zone conditions, change
conv_zones_bitmap into an array of zone conditions, using 1 byte per
zone. This increases the memory usage from 1 bit per zone to 1 byte per
zone, that is, from 16 KiB to about 100 KiB for a 30 TB SMR HDD with 256
MiB zones. This is a trade-off to allow fast cached report zones later
on top of this change.
Rename the conv_zones_bitmap field of struct gendisk to zones_cond. Add
a blk_revalidate_zone_cond() function to initialize the zones_cond array
of a disk during device scan and to update it on device revalidation.
Move the allocation of the zones_cond array to
disk_revalidate_zone_resources(), making sure that this array is always
allocated, even for devices that do not need zone write plugs (zone
resources), to ensure that bdev_zone_is_seq() can be re-implemented to
use the zone condition array in place of the conv zones bitmap.
Finally, the function bdev_zone_is_seq() is rewritten to use a test on
the condition of the target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reorganize the fields of struct blk_zone_wplug to remove a hole after
the wp_offset field and avoid having the bio_work structure split
between 2 cache lines.
No functional changes.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit b76b840fd9 ("dm: Fix dm-zoned-reclaim zone write pointer
alignment") introduced an indirect call for the callback function of a
report zones executed with blkdev_report_zones(). This is necessary so
that the function disk_zone_wplug_sync_wp_offset() can be called to
refresh a zone write plug zone write pointer offset after a write error.
However, this solution makes following the path of a zone information
harder to understand.
Clean this up by introducing the new blk_report_zones_args structure to
define a zone report callback and its private data and introduce the
helper function disk_report_zone() which calls both
disk_zone_wplug_sync_wp_offset() and the zone report user callback
function for all zones of a zone report. This helper function must be
called by all block device drivers that implement the report zones
block operation in order to correctly report a zone information.
All block device drivers supporting the report_zones block operation are
updated to use this new scheme.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The variable capacity is used only in one place and so can be removed
and get_capacity(disk) used directly instead.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Modify disk_update_zone_resources() to freeze the device queue before
updating the number of zones, zone capacity and other zone related
resources. The locking order resulting from the call to
queue_limits_commit_update_frozen() is preserved, that is, the queue
limits lock is first taken by calling queue_limits_start_update() before
freezing the queue, and the queue is unfrozen after executing
queue_limits_commit_update(), which replaces the call to
queue_limits_commit_update_frozen().
This change ensures that there are no in-flights I/Os when the zone
resources are updated due to a zone revalidation. In case of error when
the limits are applied, directly call disk_free_zone_resources() from
disk_update_zone_resources() while the disk queue is still frozen to
avoid needing to freeze & unfreeze the queue again in
blk_revalidate_disk_zones(), thus simplifying that function code a
little.
Fixes: 0b83c86b44 ("block: Prevent potential deadlock in blk_revalidate_disk_zones()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions blk_zone_wplug_handle_reset_or_finish() and
blk_zone_wplug_handle_reset_all() both modify the zone write pointer
offset of zone write plugs that are the target of a reset, reset all or
finish zone management operation. However, these functions do this
modification before the BIO is executed. So if the zone operation fails,
the modified zone write pointer offsets become invalid.
Avoid this by modifying the zone write pointer offset of a zone write
plug that is the target of a zone management operation when the
operation completes. To do so, modify blk_zone_bio_endio() to call the
new function blk_zone_mgmt_bio_endio() which in turn calls the functions
blk_zone_reset_all_bio_endio(), blk_zone_reset_bio_endio() or
blk_zone_finish_bio_endio() depending on the operation of the completed
BIO, to modify a zone write plug write pointer offset accordingly.
These functions are called only if the BIO execution was successful.
Fixes: dd291d77cc ("block: Introduce zone write plugging")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of doing this on the first call of the function just initialize
the stub fence during kernel load.
This has the clear advantage of lower overhead and also doesn't rely on
the ops to not be NULL any more.
v2: use correct signal function
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20251031134442.113648-3-christian.koenig@amd.com
When the PCIe controller is running in endpoint mode, the controller
initialization is triggered by a PERST# (PCIe reset) GPIO deassertion.
The driver has configured an IRQ to trigger when the PERST# GPIO changes
state. Without the pinctrl definition, we do not get an IRQ when PERST#
is deasserted, so the PCIe controller never gets initialized.
Add the missing definitions, so that the controller actually gets
initialized.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Fixes: 0580286d0d ("arm64: tegra: Add Tegra234 PCIe C4 EP definition")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[treding@nvidia.com: add blank lines to separate blocks]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a driver for the regulators found on the MT6363 PMIC, fully
controlled by SPMI interface.
This PMIC regulates voltage with an input range of 2.6-5.0V, and
features 10 buck converters and 26 LDOs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the regulators found in the MediaTek MT6363 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks, along with the MT6316 and
MT6373 PMICs.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a driver for the regulators found on all types of the MediaTek
MT6316 SPMI PMIC, fully controlled by SPMI interface and featuring
four step down DCDC (buck) converters.
In particular, this includes support for:
- MT6316(BP/VP): 2+2 Phase (Phase 1: buck1+2, Phase 2: buck3+4)
- MT6316(CP/HP/KP): 3+1 Phase (Phase 1: buck1+2+4, Phase 2: buck3)
- MT6316(DP/TP): 4+0 Phase (Single phase, buck1+2+3+4)
Please note that the set/clear registers for the enable bits are
not documented in the datasheet version that I used as reference,
but those are used in the downstream driver and I verified that
are actually working as expected.
Besides, it's also worth clearly mentioning that the MT6316 PMICs
voltage selector register uses a weird 9-bits Big Endian format,
for which a driver-private helper is provided.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251027110527.21002-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the regulators found in the MediaTek MT6316 PMIC,
usually found in board designs using the MT6991 Dimensity 9400 and
on MT8196 Kompanio SoC for Chromebooks.
This chip is fully controlled by SPMI and has multiple variants
providing different phase configurations.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027110527.21002-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the code using guard() for spin locks.
No functional changes, just cleanup.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-20-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-17-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-16-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-15-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-14-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-13-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Its common pattern in q6dsp code to allocate temporary buffer
to send gpr/apr packets and free at the function exit.
Now this can be simplified via __free(kfree) mechanism.
No functional changes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251023102444.88158-12-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Both capture and playback can have different runtimes, so set them
accordingly.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-10-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
make use of q6asm_get_hw_pointer to get the current hardware read/write
pointer and remove any additional code that does calculate this manually.
As this is redundant and prone to errors.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-9-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently q6asm-dai is performing an extra layer of calculation on the hw_ptr,
which is always prone to errors and redundant.
q6asm already has tokens to indentify the pointer pointers which an be
used to get the hw_ptr and this is more accurate then doing the
artificial calculation at upper layers.
Add helper function q6asm_get_hw_pointer() to get this hw_ptr.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-8-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the existing code, we are only setting up one period at a time, in a
ping-pong buffer style. This triggers lot of underruns in the dsp
leading to jitter noise during audio playback.
Fix this by scheduling all available periods, this will ensure that the dsp
has enough buffer feed and ultimatley fixing the underruns and audio distortion.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-7-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For record path, multiple read requests are queued to dsp in advance.
However when data stream is closed, the pending read requests are rejected
by the dsp and a response is sent to the driver, this case is not handled
in the driver resulting in errors like below
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: command[0x10dac] not expecting rsp
This is same for both write and eos.
Fix this by allowing ASM_DATA_CMD_READ_V2, ASM_DATA_CMD_EOS and
ASM_DATA_CMD_WRITE_V2 as expected response.
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-6-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not stop a q6asm stream if its not started, this can result in
unnecessary dsp command which will timeout anyway something like below:
q6asm-dai ab00000.remoteproc:glink-edge:apr:service@7:dais: CMD 10bcd timeout
Fix this by correctly checking the state.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-5-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP expects the periods to be aligned to fragment sizes, currently
setting up to hw constriants on periods bytes is not going to work
correctly as we can endup with periods sizes aligned to 32 bytes however
not aligned to fragment size.
Update the constriants to use fragment size, and also set at step of
10ms for period size to accommodate DSP requirements of 10ms latency.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A matching Common object post processing instance is normally resused
across multiple streams. However currently we close this on DSP
even though there is a refcount on this copp object, this can result in
below error.
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: Found Matching Copp 0x0
qcom-q6adm aprsvc:service:4:8: cmd = 0x10325 return error = 0x2
q6routing ab00000.remoteproc:glink-edge:apr:service@8:routing: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
qcom-q6adm aprsvc:service:4:8: cmd = 0x10327 return error = 0x2
qcom-q6adm aprsvc:service:4:8: DSP returned error[2]
qcom-q6adm aprsvc:service:4:8: Failed to close copp -22
Fix this by addressing moving the adm_close to copp_kref destructor
callback.
Fixes: 7b20b2be51 ("ASoC: qdsp6: q6adm: Add q6adm driver")
Cc: Stable@vger.kernel.org
Reported-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver does not expect the appl_ptr to move backward and requires
explict sync. Make sure that the userspace does not do appl_ptr rewinds
by specifying the correct flags in pcm_info.
Without this patch, the result could be a forever loop as current logic assumes
that appl_ptr can only move forward.
Fixes: 3d4a4411aa ("ASoC: q6apm-dai: schedule all available frames to avoid dsp under-runs")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB5, RB3
Link: https://patch.msgid.link/20251023102444.88158-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Long ago, the kernel module license checks were bypassed by embedding a
NUL character in the MODULE_LICENSE() string[1]. By using a string like
"GPL\0proprietary text", the kernel would only read "GPL" due to C string
termination at the NUL byte, allowing proprietary modules to avoid kernel
tainting and access GPL-only symbols.
The MODULE_INFO() macro stores these strings in the .modinfo ELF
section, and get_next_modinfo() uses strcmp()-family functions
which stop at the first NUL. This split the embedded string into two
separate .modinfo entries, with only the first part being processed by
license_is_gpl_compatible().
Add a compile-time check using static_assert that compares the full
string length (sizeof - 1) against __builtin_strlen(), which stops at
the first NUL. If they differ, compilation fails with a clear error
message.
While this check can still be circumvented by modifying the ELF binary
post-compilation, it prevents accidental embedded NULs and forces
intentional abuse to require deliberate binary manipulation rather than
simple source-level tricks.
Build tested with test modules containing both valid and invalid license
strings. The check correctly rejects:
MODULE_LICENSE("GPL\0proprietary")
while accepting normal declarations:
MODULE_LICENSE("GPL")
Link: https://lwn.net/Articles/82305/ [1]
Suggested-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
The DRIVER_AUTHOR macro incorrectly included a semicolon in its
string literal definition. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_AUTHOR(), this created
syntax errors during macro expansion:
MODULE_AUTHOR(DRIVER_AUTHOR);
expands to:
MODULE_INFO(author, "Joonyoung Shim <jy0922.shim@samsung.com>";)
^
syntax error
Remove the trailing semicolon from the DRIVER_AUTHOR definition.
Semicolons should only appear at the point of use, not in the macro
definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
The firmware filename macros incorrectly included semicolons in their
string literal definitions. Right now, this wasn't causing any real
problem, but coming changes to the MODULE_INFO() macro make this more
sensitive. Specifically, when used with MODULE_FIRMWARE(), this
created syntax errors during macro expansion:
MODULE_FIRMWARE(LME2510_C_S7395);
expands to:
MODULE_INFO(firmware, "dvb-usb-lme2510c-s7395.fw";)
^
syntax error
Remove the trailing semicolons from all six firmware filename macro
definitions. Semicolons should only appear at the point of use, not in
the macro definition.
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Since commit d24cfee7f6 ("spi: Fix acpi deferred irq probe"), the
acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called
on the SPI device.
If there is no driver for the SPI device then the move to spi_probe()
results in acpi_dev_gpio_irq_get() never getting called. This may
cause problems by leaving the GPIO pin floating because this call is
responsible for setting up the GPIO pin direction and/or bias according
to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device()
to ensure the GPIO pin is always correctly setup, while keeping the
acpi_dev_gpio_irq_get() call added to spi_probe() to deal with
-EPROBE_DEFER returns caused by the GPIO controller not having a driver
yet.
Link: https://bbs.archlinux.org/viewtopic.php?id=302348
Fixes: d24cfee7f6 ("spi: Fix acpi deferred irq probe")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251102190921.30068-1-hansg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enforce checking of sb_min_blocksize() calls and update all callers
accordingly.
* patches from https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com:
block: add __must_check attribute to sb_min_blocksize()
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
Link: https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d84 ("binfmt_misc: fix possible deadlock in bm_register_write")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
When sb_min_blocksize() returns 0 and the return value is not checked,
it may lead to a situation where sb->s_blocksize is 0 when
accessing the filesystem super block. After commit a64e5a5960
("bdev: add back PAGE_SIZE block size validation for
sb_set_blocksize()"), this becomes more likely to happen when the
block device’s logical_block_size is larger than PAGE_SIZE and the
filesystem is unformatted. Add the __must_check attribute to ensure
callers always check the return value.
Cc: stable@vger.kernel.org # v6.15
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-6-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
In virtio_fs_add_queues_sysfs(), the code incorrectly checks fs->mqs_kobj
after calling kobject_create_and_add(). Change the check to fsvq->kobj
(fs->mqs_kobj -> fsvq->kobj) to ensure the per-queue kobject is
successfully created.
Fixes: 87cbdc396a ("virtio_fs: add sysfs entries for queue information")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251027104658.1668537-1-alok.a.tiwari@oracle.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid the
filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: a64e5a5960 ("bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-5-yangyongpeng.storage@gmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
opt->blocksize and sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 1b17a46c92 ("isofs: convert isofs to use the new mount API")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-4-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
accessing the filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 719c1e1829 ("exfat: add super block operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-3-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stephen reported that on KASAN builds he's seeing:
vmlinux.o: warning: objtool: user_exc_vmm_communication+0x15a: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_debug_user+0x182: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: exc_int3+0x123: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: noist_exc_machine_check+0x17a: call to __kasan_check_read() leaves .noinstr.text section
vmlinux.o: warning: objtool: fred_exc_machine_check+0x17e: call to __kasan_check_read() leaves .noinstr.text section
This turns out to be atomic ops from unwind_reset_info() that have
explicit instrumentation. Place unwind_reset_info() in the preceding
instrumentation_begin() section.
Fixes: c6439bfaab ("Merge tag 'trace-deferred-unwind-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251105100014.GY4068168@noisy.programming.kicks-ass.net
Add compatibles for Bananapi R4 Pro boards.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Jori Koolstra <jkoolstra@xs4all.nl> says:
Syzbot fuzzes /fs by trying to mount and manipulate deliberately
corrupted filesystems. This should not lead to BUG_ONs and WARN_ONs for
easy to detect corruptions. This series adds code to be able to report
such corruptions and fixes two syzbot bugs on this kind.
* patches from https://patch.msgid.link/20251104143005.3283980-1-jkoolstra@xs4all.nl:
Fix a drop_nlink warning in minix_rename
Fix a drop_nlink warning in minix_rmdir
Add error handling to minix filesystem for inode corruption detection
Link: https://patch.msgid.link/20251104143005.3283980-1-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner <brauner@kernel.org>
We would like to provide early and specific warnings of filesystem
corruption without running into generic WARN_ONs and BUG_ONs.
Towards this goal, ext4, e.g., has a EFSCORRUPTED errno and a
standardized inode corruption message format. This patch adds this
errno and message format to the minix filesystem.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20251104143005.3283980-2-jkoolstra@xs4all.nl
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
