H6/H616 has more ECC strenghts than A10/A23.
Move the ECC strenghts array to sunxi_nfc_caps to make it ready for
H6/H616 support.
No functional change.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The user data length (4) used all over the code hard coded.
And sometimes, it's not that trivial to know that it's the user data
length and not something else.
Moreover, for the H6/H616 this value is no more fixed by hardware, but
could be modified.
Using a define here makes the code more readable.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The register NFC_REG_ECC_CTL was read twice and the result was not used,
then a third time with a mask applied.
Removing those calls didn't change the behavior.
Tested on H616 SoC, scrambling enabled.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The H616 NAND controller is quite different from the A10 and A23 ones,
some registers offset changed, and some new one are introduced.
Also, the DMA handling is different (it uses chained descriptors)
So, introduce a new compatible to represent this version of the IP.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change name of pcf_doAddress() function to pcf_send_address() to be
more in line with the kernel functions naming.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-4-chiru.cezar.89@gmail.com
Change pcf_doAddress() function's type from int to void as it always
returns 0. This way there is no need for extra assignment and extra checks
when the function is called.
Remove assignment of pcf_doAddress() and replace it with a simple function
call.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-3-chiru.cezar.89@gmail.com
Require spaces around '=' and '<'. Add spaces around binary operators.
Enforce error fixing based on checkpatch.pl output on file.
Move 'ret' variable inside for loop. Then check if (ret < 0) goto out. This
improves usage of ret variable.
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-2-chiru.cezar.89@gmail.com
The driver calls gpiod_get_optional() in the probe function but
never calls gpiod_put() in the remove function or in the probe
error path. This leads to a GPIO descriptor resource leak.
The lpc32xx_mlc.c driver in the same directory handles this
correctly by calling gpiod_put() on both paths.
Add gpiod_put() in the remove function and in the probe error path
to fix the resource leak.
Fixes: 6b923db286 ("mtd: rawnand: lpc32xx_slc: switch to using gpiod API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Add support for NV-DDR mode in the Cadence NAND controller driver.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Due to the custom handling and layouts of certain nand controllers this
validity check will always fail for certain layouts. The check
inherently depends on even chunk sizing and this is not always the
case.
Modify the check to only print a warning, instead of failing to
init the attached NAND. This allows various 8 bit and 12 ECC strength
layouts to be used.
Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This reverts commit e6a30d0c48.
This change resulted in the 8bit ECC layouts having the incorrect amount
of read/write chunks, the last spare bytes chunk would always be missed.
Fixes: e6a30d0c48 ("mtd: rawnand: marvell: fix layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Physmap supports minimal PM since commit 0bc448b49e ("mtd: maps:
physmap: Add minimal Runtime PM support"), so support it also when used
in DT configurations.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In the btf_dumper_do_type function, the debug print statement for
BTF_KIND_UNKN was missing a closing parenthesis in the output format.
This patch adds the missing ')' to ensure proper formatting of the
dump output.
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251028063345.1911-1-zhangchujun@cmss.chinamobile.com
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add handling for events for the electronic privacy screen found on some
models (e.g. Dell Latitude 7300) being toggled on/off.
Emit KEY_EPRIVACY_SCREEN_OFF / KEY_EPRIVACY_SCREEN_ON events for this so
that userspace can show the usual on-screen-display (OSD) notification for
eprivacy screen on/off to the user.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251020152331.52870-3-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add keycodes for hotkeys toggling the electronic privacy screen found on
some laptops on/off.
There already is an API for eprivacy screens as kernel-mode-setting drm
connector object properties:
https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
this API also supports reporting when the eprivacy screen is turned on/off
by the embedded-controller (EC) in response to hotkey presses.
But on some laptops (e.g. the Dell Latitude 7300) the firmware does not
allow querying the presence nor the status of the eprivacy screen at boot.
This makes it impossible to implement the drm connector properties API
since drm objects do not allow adding new properties after creation and
the presence of the eprivacy cannot be detected at boot.
The first notice of the presence of an eprivacy screen on these laptops is
an EC generated (WMI) event when the eprivacy screen hotkeys are pressed.
In this case the new keycodes this change adds can be generated to notify
userspace of the eprivacy screen on/off hotkeys being pressed, so that
userspace can show the usual on-screen-display (OSD) notification for eprivacy
screen on/off to the user. This is similar to how e.g. touchpad on/off
keycodes are used to show the touchpad on/off OSD.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add myself as the maintainer of the int3472 driver. Also update Daniel's
e-mail address while at it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028084959.394795-1-sakari.ailus@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cb57b8cdb0)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.
This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99441824be)
Cc: stable@vger.kernel.org
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: e8529dbc75 ("drm/amdgpu: add ip offset support for cyan skillfish")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 102c4f7c55)
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: d1bb646510 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68c20d7b17)
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: 523b69c654 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72c5482cb0)
These should be MIT. The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.
Fixes: 92d5d2a09d ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit abd3f87640)
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22)
Before commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fc)
Cc: stable@vger.kernel.org
v1:
Pause the workload setting in dm when doinn idle optimization
v2:
Rebase patch to latest kernel code base (kernel 6.16)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc6d54ac7e)
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3eb8c0b4c0)
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 16c0681617)
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367e)
Cc: stable@vger.kernel.org
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 1f403699c4 ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Reported-by: Sjoerd Simons <sjoerd@collabora.com>
Closes: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@collabora.com
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251006093937.27869-1-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The driver uses pcim_enable_device() to enable the PCI device,
the device will be automatically disabled on driver detach through
the managed device framework. The manual pci_disable_device() calls
in the error paths are therefore redundant and should be removed.
Found via static anlaysis and this is similar to commit 99ca0b57e4
("thermal: intel: int340x: processor: Fix warning during module unload").
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20251026090859.33107-1-linmq006@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e523 ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Inline the contents of sh-sci.h into sh-sci.c and remove the
header file. The header only contained register definitions
and macros used exclusively by the sh-sci driver, making the
separate header unnecessary.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20251023104313.210989-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to UCSI 2.0 specification, the orientation is
part of the connector status payload. So tie up the port
orientation.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://patch.msgid.link/20251028-usb-typec-ucsi-orientation-v2-1-9330478bb6c1@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SET_POWER_LEVEL to list of commands supported by UCSI debugfs.
Signed-off-by: Venkat Jayaraman <venkat.jayaraman@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251026235830.936477-1-venkat.jayaraman@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix unconventional kernel-doc lines to avoid warnings.
Summary of changes:
- change non-kernel-doc comments from "/**" to "/*"
- add "enum <enum-name> - short description" for undescribed enums
- use leading '@' for describing enum members and struct members
- add "struct <struct-name> - short description" for undescribed structs
Repair and remove invalid or unconventional lines in mtu3.h:
(This list is a combination of warnings from the old kernel-doc.pl and
the new kernel-doc.py scripts. This combo provides better coverage
of all problems.)
mtu3.h:69: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* IP TRUNK version
mtu3.h:69: warning: missing initial short description on line:
* IP TRUNK version
mtu3.h:78: warning: This comment starts with '/**', but isn't a
kernel-doc comment.
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:78: warning: missing initial short description on line:
* Normally the device works on HS or SS, to simplify fifo management,
mtu3.h:89: warning: This comment starts with '/**', but isn't
a kernel-doc comment.
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:89: warning: missing initial short description on line:
* Maximum size of ep0 response buffer for ch9 requests,
mtu3.h:106: warning: Cannot understand * @MU3D_EP0_STATE_SETUP: waits for
SETUP or received a SETUP
on line 106 - I thought it was a doc line
mtu3.h:130: warning: cannot understand function prototype:
'enum mtu3_dr_force_mode'
mtu3.h:137: warning: Cannot understand * @base: the base address of fifo
on line 137 - I thought it was a doc line
mtu3.h:148: warning: missing initial short description on line:
* General Purpose Descriptor (GPD):
mtu3.h:174: warning: cannot understand function prototype:
'struct qmu_gpd'
mtu3.h:189: warning: cannot understand function prototype:
'struct mtu3_gpd_ring'
mtu3.h:198: warning: Cannot understand * @vbus: vbus 5V used by host mode
on line 198 - I thought it was a doc line
mtu3.h:225: warning: Cannot understand * @mac_base: register base address
of device MAC, exclude xHCI's
on line 225 - I thought it was a doc line
mtu3.h:275: warning: cannot understand function prototype: 'struct mtu3_ep'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_NONE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_HOST'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:135 Enum value 'MTU3_DR_FORCE_DEVICE'
not described in enum 'mtu3_dr_force_mode'
Warning: drivers/usb/mtu3/mtu3.h:270 Cannot find identifier on line:
* @fifo_size: it is (@slot + 1) * @fifo_seg_size
Warning: drivers/usb/mtu3/mtu3.h:271 Cannot find identifier on line:
* @fifo_seg_size: it is roundup_pow_of_two(@maxp)
Warning: drivers/usb/mtu3/mtu3.h:272 Cannot find identifier on line:
*/
Warning: drivers/usb/mtu3/mtu3.h:273 Cannot find identifier on line:
struct mtu3_ep {
Warning: drivers/usb/mtu3/mtu3.h:274 Cannot find identifier on line:
struct usb_ep ep;
Warning: drivers/usb/mtu3/mtu3.h:275 Cannot find identifier on line:
char name[12];
Warning: drivers/usb/mtu3/mtu3.h:276 missing initial short description
on line:
struct mtu3 *mtu;
This removes all of the invalid/unconventional kernel-doc attempts but
still leaves quite a few struct members in structs ssusb_mtk, mtu3_ep,
and mtu3 without kernel-doc descriptions.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251026224558.826143-2-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'struct hc_driver' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
52065 23176 256 75497 126e9 drivers/usb/host/xen-hcd.o
After:
=====
text data bss dec hex filename
52897 22344 256 75497 126e9 drivers/usb/host/xen-hcd.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/63241c9e857646d895ce615b998d41ee4829f9e3.1761475831.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWMAC1000 supports 2 timestamping configurations to configure how
frequency adjustments are made to the ptp_clock, as well as the reported
timestamp values.
There was a previous attempt at upstreaming support for configuring this
mode by Olivier Dautricourt and Julien Beraud a few years back [1]
In a nutshell, the timestamping can be either set in fine mode or in
coarse mode.
In fine mode, which is the default, we use the overflow of an accumulator to
trigger frequency adjustments, but by doing so we lose precision on the
timetamps that are produced by the timestamping unit. The main drawback
is that the sub-second increment value, used to generate timestamps, can't be
set to lower than (2 / ptp_clock_freq).
The "fine" qualification comes from the frequent frequency adjustments we are
able to do, which is perfect for a PTP follower usecase.
In Coarse mode, we don't do frequency adjustments based on an
accumulator overflow. We can therefore have very fine subsecond
increment values, allowing for better timestamping precision. However
this mode works best when the ptp clock frequency is adjusted based on
an external signal, such as a PPS input produced by a GPS clock. This
mode is therefore perfect for a Grand-master usecase.
Introduce a driver-specific devlink parameter "ts_coarse" to enable or
disable coarse mode, keeping the "fine" mode as a default.
This can then be changed with:
devlink dev param set <dev> name ts_coarse value true cmode runtime
The associated documentation is also added.
[1] : https://lore.kernel.org/netdev/20200514102808.31163-1-olivier.dautricourt@orolia.com/
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251024070720.71174-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
