I accidentally added drivers/misc/Makefile.rej when applying the
mrvl-cn10k-dpi by hand. Remove it as it's not needed.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 5f67eef6df ("misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of binder_available_for_proc_work_ilocked() in
commit 1b77e9dcc3 ("ANDROID: binder: remove proc waitqueue") a binder
thread can only "wait_for_proc_work" after its thread->looper has been
marked as BINDER_LOOPER_STATE_{ENTERED|REGISTERED}.
This means an unregistered reader risks waiting indefinitely for work
since it never gets added to the proc->waiting_threads. If there are no
further references to its waitqueue either the task will hang. The same
applies to readers using the (e)poll interface.
I couldn't find the rationale behind this restriction. So this patch
restores the previous behavior of allowing unregistered threads to
"wait_for_proc_work". Note that an error message for this scenario,
which had previously become unreachable, is now re-enabled.
Fixes: 1b77e9dcc3 ("ANDROID: binder: remove proc waitqueue")
Cc: stable@vger.kernel.org
Cc: Martijn Coenen <maco@google.com>
Cc: Arve Hjønnevåg <arve@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240711201452.2017543-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/virtio/virtio_dma_buf.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240602-md-virtio_dma_buf-v1-1-ce602d47e257@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With ARCH=powerpc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/agp/uninorth-agp.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20240615-md-powerpc-drivers-char-agp-v1-1-b79bfd07da42@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/hisi-spmi-controller.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/spmi/spmi-pmic-arb.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240609-md-drivers-spmi-v1-1-f1d5b24e7a66@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/configfs/configfs_sample.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Nacked-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240601-md-samples-configfs-v1-1-83ef2d3c0088@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.
At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This pull request contains the interconnect changes for the 6.11-rc1 merge
window. It contains just driver changes with the following highlights:
Driver changes:
- New driver for MediaTek MT8183/8195 platforms
- New driver for MSM8953 platforms
- New QoS support for RPMh-based platforms with SC7280 being the
first one to benefit from it.
- Fix incorrect master-id value in qcm2290 driver
- Add missing MODULE_DESCRIPTION in a few drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aTzU
-----END PGP SIGNATURE-----
Merge tag 'icc-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.11
This pull request contains the interconnect changes for the 6.11-rc1 merge
window. It contains just driver changes with the following highlights:
Driver changes:
- New driver for MediaTek MT8183/8195 platforms
- New driver for MSM8953 platforms
- New QoS support for RPMh-based platforms with SC7280 being the
first one to benefit from it.
- Fix incorrect master-id value in qcm2290 driver
- Add missing MODULE_DESCRIPTION in a few drivers
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Fix DT backwards compatibility for QoS
interconnect: qcom: Add MSM8953 driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC
interconnect: qcom: qcm2290: Fix mas_snoc_bimc RPM master ID
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: icc-rpmh: Add QoS configuration support
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: mediatek: remove unneeded semicolon
interconnect: qcom: add missing MODULE_DESCRIPTION() macros
interconnect: imx: add missing MODULE_DESCRIPTION() macros
interconnect: mediatek: Add MediaTek MT8183/8195 EMI Interconnect driver
dt-bindings: interconnect: Add MediaTek EMI Interconnect bindings
========
- Used unique 'mhi_pci_dev_info' struct for product families instead of reusing
a shared struct. This allows displaying the actual product name for the MHI
devices during driver probe.
- Added support for Foxconn SDX72 based modems, T99W515 and DW5934E.
- Added a 'name' field to 'struct mhi_controller' for allowing the MHI client
drivers to uniquely identify each MHI device based on its product/device name.
This is useful in applying any device specific quirks in the client drivers.
WWAN MHI Client driver
======================
- Due to the build dependency with the MHI patch exposing 'name' field to client
drivers, the WWAN MHI client driver patch that is making use of the 'name'
field to apply custom data mux id for Foxconn modems is also included.
Collected Ack from Networking maintainer for this patch.
MHI EP
======
- Fixed the MHI EP stack to not allocate memory for MHI objects from DMA zone.
This was done accidentally while adding the slab cache support and causes the
MHI EP stack to run out of memory while doing high bandwidth transfers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmaJBAYACgkQVZ8R5v6R
zvW1Rgf/bKsn/duE6IxTyEkdd2BEe4x/ly/QNb9hN5LbNnUpVV2r86vlJVJX/yQt
5hqqUBJ7dwv95B79hhtt7McngBbYYG5uUmmnzjzBhzchaj1aiz9gfPc173Kqc2OS
iI0qDVGH3Ci7c91o8AcgJt4f22E4uXCVY5fuQ7fT0xIDhDVbLzI3aeKaOTE2bnPx
Co/ShoUcQ8j8zu5fo+sChaG/xuWXPXhgmW1/5nQKJe01Mf8T63T4JLY4M9WI1Z7t
E+6EYO/yEp3tw6rrQs4zM2KqnVzz8Yd6tGt0Z+U9y6qQrJM/uOpnJRGaBCIqPbLA
itavUL/gKehqaUmpDLK24CjtIpCM7Q==
=5AT7
-----END PGP SIGNATURE-----
Merge tag 'mhi-for-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Used unique 'mhi_pci_dev_info' struct for product families instead of reusing
a shared struct. This allows displaying the actual product name for the MHI
devices during driver probe.
- Added support for Foxconn SDX72 based modems, T99W515 and DW5934E.
- Added a 'name' field to 'struct mhi_controller' for allowing the MHI client
drivers to uniquely identify each MHI device based on its product/device name.
This is useful in applying any device specific quirks in the client drivers.
WWAN MHI Client driver
======================
- Due to the build dependency with the MHI patch exposing 'name' field to client
drivers, the WWAN MHI client driver patch that is making use of the 'name'
field to apply custom data mux id for Foxconn modems is also included.
Collected Ack from Networking maintainer for this patch.
MHI EP
======
- Fixed the MHI EP stack to not allocate memory for MHI objects from DMA zone.
This was done accidentally while adding the slab cache support and causes the
MHI EP stack to run out of memory while doing high bandwidth transfers.
* tag 'mhi-for-v6.11' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
net: wwan: mhi: make default data link id configurable
bus: mhi: host: Allow controller drivers to specify name for the MHI controller
bus: mhi: host: Add support for Foxconn SDX72 modems
bus: mhi: host: pci_generic: Use unique 'mhi_pci_dev_info' for product families
bus: mhi: ep: Do not allocate memory for MHI objects from DMA zone
The placement of the `segdist_codes` array documentation was corrected
to conform with kernel documentation guidelines. The `@segdist_codes`
was placed incorrectly within the struct `segdist_code` documentation
block, which led to a potential misinterpretation of the code structure.
The `segdist_codes` array documentation was moved outside the struct
block, and a separate comment block was provided for it. This change
ensures that clarity and proper alignment with kernel documentation
standards are maintained.
A kernel-doc warning was addressed:
./drivers/slimbus/stream.c:49: warning: Excess struct member 'segdist_codes' description in 'segdist_code'
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705080234.424587-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FastRPC is a way to offload method invocation to the DSPs on Qualcomm
platforms. As the driver uses dma-bufs, add dri-devel mailing list to
the MAINTAINERS's entry, so that DRM maintainers are notified about the
uAPI changes. This follows the usual practice established by the "DMA
BUFFER SHARING FRAMEWORK" entry in the file.
Suggested-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use fastrpc_remote_heap_alloc to allocate from the FastRPC device
instead of the Compute Bank when the session ID is 0. This ensures
that the allocation is inside the coherent DMA pool which is already
accessible to the DSP. This is necessary to support FastRPC devices
which do not have dedicated Compute Banks such as the SLPI on the SDM845.
The latter uses an allocated CMA region instead of FastRPC Compute Banks.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To support FastRPC Context Banks which aren't mapped via the SMMU,
make the whole reserved memory region available to the DSP to allow
access to coherent buffers.
This is performed by assigning the memory to the DSP via a hypervisor
call to set the correct permissions for the Virtual Machines on the DSP.
This is only necessary when a memory region is provided for SLPI DSPs
so guard this with a domain ID check.
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/misc/fastrpc.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Few dev_err calls are missing newlines. This can result in unrelated
lines getting appended which might make logs difficult to understand.
Add trailing newlines to avoid this.
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Switching to memdup_user() overwrites the allocated memory only once,
whereas kzalloc() followed by copy_from_user() initializes the allocated
memory to zero and then immediately overwrites it.
Fixes the following Coccinelle/coccicheck warning reported by
memdup_user.cocci:
WARNING opportunity for memdup_user
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705075900.424100-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement "force_ro" sysfs attribute to allow users to set read-write
devices as read-only and back to read-write from userspace. The choice
of the name is based on MMC core 'force_ro' attribute.
This solves a situation where an AT24 I2C EEPROM with GPIO based nWP
signal may have to be occasionally updated. Such I2C EEPROM device is
usually set as read-only during most of the regular system operation,
but in case it has to be updated in a controlled manner, it could be
unlocked using this new "force_ro" sysfs attribute and then re-locked
again.
The "read-only" DT property and config->read_only configuration is
respected and is used to set default state of the device, read-only
or read-write, for devices which do implement .reg_write function.
For devices which do not implement .reg_write function, the device
is unconditionally read-only and the "force_ro" attribute is not
visible.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-16-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use sysfs_emit() instead of sprintf() to follow best practice per
Documentation/filesystems/sysfs.rst
"
show() should only use sysfs_emit()...
"
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-15-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document a type attribute used by userspace to discern different types of
NVMEM devices. The implementation is already present, the ABI document is
missing, add it.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace two spaces with tab in the sysfs attribute documentation.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The same checks have already been done in sysfs_kf_bin_write() and
sysfs_kf_bin_read() just before the callbacks are invoked.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem_cells_groups is a global variable that is also mutated.
This is complicated and error-prone.
Instead use a normal stack variable.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sysfs core provides a function to easily register a single group.
Use it and remove the now unnecessary nvmem_cells_groups array.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On newer SoCs, the eFuse hardware can require a power-domain to operate,
add it as optional.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device currently reports an "Unknown" type in sysfs.
Since it is an eFuse hardware device, set its type to OTP.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Rockchip OTP describes its layout via devicetree subnodes,
so set the appropriate property.
Fixes: 2cc3b37f5b ("nvmem: add explicit config option to read old syntax fixed OF cells")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use __free for device_node values, and thus drop calls to
of_node_put.
The goal is to reduce memory management issues by using this
scope-based of_node_put() cleanup to simplify function exit
handling. When using __free a resource is allocated within a
block, it is automatically freed at the end of the block.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem-apple-efuses.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_brcm_nvram.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/nvmem/nvmem_u-boot-env.o
Add the missing invocations of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240705074852.423202-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This series adds QoS support for QNOC type device which can be found on
SC7280 platform. It adds support for programming priority,
priority forward disable and urgency forwarding. This helps in
priortizing the traffic originating from different interconnect masters
at NOC (Network On Chip).
* icc-rpmh-qos
dt-bindings: interconnect: add clock property to enable QOS on SC7280
interconnect: qcom: icc-rpmh: Add QoS configuration support
interconnect: qcom: sc7280: enable QoS configuration
interconnect: qcom: Fix DT backwards compatibility for QoS
Link: https://lore.kernel.org/r/20240607173927.26321-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add qos_clks_required flag to skip QoS configuration if clocks property
is not populated in devicetree for providers which require clocks to be
enabled for accessing registers. This is to keep the QoS configuration
backwards compatible with devices that have older DTB.
Reported-by: Bjorn Andersson <andersson@kernel.org>
Closes: https://lore.kernel.org/all/ciji6nlxn752ina4tmh6kwvek52nxpnguomqek6plwvwgvoqef@yrtexkpmn5br/
Signed-off-by: Odelu Kukatla <quic_okukatla@quicinc.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Fixes: fbd908bb8b ("interconnect: qcom: sc7280: enable QoS configuration")
Link: https://lore.kernel.org/r/20240704125515.22194-1-quic_okukatla@quicinc.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Request a PPI for each vCPU during probe which will be used by the host
to communicate a stall detected event on the vCPU. When the host raises
this interrupt from the virtual machine monitor, the guest is expected to
handle the interrupt and panic.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-3-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vcpu stall detector allows the host to monitor the availability of a
guest VM. Introduce a PPI interrupt which can be injected from the host
into the virtual gic to let the guest reboot itself.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240703153732.3214238-2-sebastianene@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DDR4 DIMMS implementing SPD Annex L, Revision 1 do not implement SPD byte
14 (Module Temperature Sensor); this byte was only added in revision 2 of
the standard. This only applies to DDR4, not DDR4E or LPDDR4, since those
DDR types were only introduced in revision 3 of the standard.
Use this information to instantiate the jc42 device if the module is a DDR4
following SPD revision 1.0 and a device is detected at the expected thermal
sensor address, even if the Module Temperature Sensor byte suggests that
the thermal sensor is not supported.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-2-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instantiating a device by calling i2c_new_client_device() assumes that the
device is not already instantiated. If that is not the case, it will return
an error and generate a misleading kernel log message.
i2c i2c-0: Failed to register i2c client jc42 at 0x18 (-16)
This can be reproduced by unloading the ee1004 driver and loading it again.
Avoid this by calling i2c_new_scanned_device() instead, which returns
silently if a device is already instantiated or does not exist.
Fixes: 393bd1000f ("eeprom: ee1004: add support for temperature sensor")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240629173716.20389-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the driver does not register a nvmem provider, which means
that userspace programs cannot access the ee1004 EEPROM through the
standard nvmem sysfs API.
Fix this by replacing the custom sysfs attribute with a standard nvmem
interface, which also takes care of backwards compatibility.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-2-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use devm_add_action_or_reset() to clean up the bus data at
driver removal or when an error occurs during probe.
This will allow us to use other devres-based APIs later.
Tested on a Dell Inspiron 3505.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240625063459.429953-1-W_Armin@gmx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
-----BEGIN PGP SIGNATURE-----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=+9tp
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
'devmodel' hasn't actually been used since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
and everyone now has it set to true and has been fixed up; remove
the flag.
(There are still comments all over about it)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-4-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The attach function pointers haven't actually been called since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
topped adding entries to the drivers list.
If you're converting a driver, look at the 'match_port' function
pointer instead.
(There are lots of comment references to 'attach' all over, but they
probably need some deeper understanding to check the semantics
to see if they can be replaced by match_port).
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list has been empty since:
'commit 3275158fa5 ("parport: remove use of devmodel")'
This also means we can remove the 'list_head' from
struct parport_driver.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240502154823.67235-2-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'mcb_parse_priv' has been unused since the initial
commit 3764e82e51 ("drivers: Introduce MEN Chameleon Bus").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/20240624090104.12871-2-jth@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
