[ Upstream commit bbb6224887 ]
The perf event should be marked disabled during the creation as
it is not ready to be scheduled until there is SBI PMU start call
or config matching is called with auto start. Otherwise, event add/start
gets called during perf_event_create_kernel_counter function.
It will be enabled and scheduled to run via perf_event_enable during
either the above mentioned scenario.
Fixes: 0cb74b65d2 ("RISC-V: KVM: Implement perf support without sampling")
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-1-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a1e3bf61f ]
Support was added for Tegra234 in the referenced commit, but the Kconfig
was not updated to allow building for the arch.
Fixes: 273bc890a2 ("cpufreq: tegra194: Add support for Tegra234")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeb87d17ac ]
The check before setting power.must_resume in device_suspend_noirq()
does not take power.child_count into account, but it should do that, so
use pm_runtime_need_not_resume() in it for this purpose and adjust the
comment next to it accordingly.
Fixes: 107d47b2b9 ("PM: sleep: core: Simplify the SMART_SUSPEND flag handling")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3353728.44csPzL39Z@rjwysocki.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1b65f3f7c ]
Turns out that this commit, about 10 years ago:
9ec23531fd ("sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults")
... accidentally (and unnessecarily) put the lockdep part of
__might_fault() under CONFIG_DEBUG_ATOMIC_SLEEP=y.
This is potentially notable because large distributions such as
Ubuntu are running with !CONFIG_DEBUG_ATOMIC_SLEEP.
Restore the debug check.
[ mingo: Update changelog. ]
Fixes: 9ec23531fd ("sched/preempt, mm/fault: Trigger might_sleep() in might_fault() with disabled pagefaults")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20241104135517.536628371@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72dafb5677 ]
The following commit:
1c811d403a ("x86/sev: Fix position dependent variable references in startup code")
introduced RIP_REL_REF() to force RIP-relative accesses to global variables,
as needed to prevent crashes during early SEV/SME startup code.
For completeness, RIP_REL_REF() should be used with additional variables during
sme_enable():
https://lore.kernel.org/all/CAMj1kXHnA0fJu6zh634=fbJswp59kSRAbhW+ubDGj1+NYwZJ-Q@mail.gmail.com/
Access these vars with RIP_REL_REF() to prevent problem reoccurence.
Fixes: 1c811d403a ("x86/sev: Fix position dependent variable references in startup code")
Signed-off-by: Kevin Loughlin <kevinloughlin@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241122202322.977678-1-kevinloughlin@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 976ba8da2f ]
The CONFIG_EISA menu was cleaned up in 2018, but this inadvertently
brought the option back on 64-bit machines: ISA remains guarded by
a CONFIG_X86_32 check, but EISA no longer depends on ISA.
The last Intel machines ith EISA support used a 82375EB PCI/EISA bridge
from 1993 that could be paired with the 440FX chipset on early Pentium-II
CPUs, long before the first x86-64 products.
Fixes: 6630a8e501 ("eisa: consolidate EISA Kconfig entry in drivers/eisa")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-11-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d3b81d4d8 ]
The init_task instance of struct task_struct is statically allocated and
may not contain the full FP state for userspace. As such, limit the copy
to the valid area of both init_task and 'dst' and ensure all memory is
initialized.
Note that the FP state is only needed for userspace, and as such it is
entirely reasonable for init_task to not contain parts of it.
Fixes: 5aaeb5c01c ("x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250226133136.816901-1-benjamin@sipsolutions.net
----
v2:
- Fix code if arch_task_struct_size < sizeof(init_task) by using
memcpy_and_pad.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1937e18cc3 ]
Ongoing work on an optimization to batch-preallocate vCPU state buffers
for KVM revealed a mismatch between the allocation sizes used in
fpu_alloc_guest_fpstate() and fpstate_realloc(). While the former
allocates a buffer sized to fit the default set of XSAVE features
in UABI form (as per fpu_user_cfg), the latter uses its ksize argument
derived (for the requested set of features) in the same way as the sizes
found in fpu_kernel_cfg, i.e. using the compacted in-kernel
representation.
The correct size to use for guest FPU state should indeed be the
kernel one as seen in fpstate_realloc(). The original issue likely
went unnoticed through a combination of UABI size typically being
larger than or equal to kernel size, and/or both amounting to the
same number of allocated 4K pages.
Fixes: 69f6ed1d14 ("x86/fpu: Provide infrastructure for KVM FPU cleanup")
Signed-off-by: Stanislav Spassov <stanspas@amazon.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250218141045.85201-1-stanspas@amazon.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9207cf776 ]
When doing error injection to some memory DIMMs on certain Intel Emerald
Rapids servers, the i10nm_edac missed error reports for some memory DIMMs.
Certain BIOS configurations may hide some memory controllers, and the
i10nm_edac doesn't enumerate these hidden memory controllers. However, the
ADXL decodes memory errors using memory controller physical indices even
if there are hidden memory controllers. Therefore, the memory controller
physical indices reported by the ADXL may mismatch the logical indices
enumerated by the i10nm_edac, resulting in missed error reports for some
memory DIMMs.
Fix this issue by creating a mapping table from memory controller physical
indices (used by the ADXL) to logical indices (used by the i10nm_edac) and
using it to convert the physical indices to the logical indices during the
error handling process.
Fixes: c545f5e412 ("EDAC/i10nm: Skip the absent memory controllers")
Reported-by: Kevin Chang <kevin1.chang@intel.com>
Tested-by: Kevin Chang <kevin1.chang@intel.com>
Reported-by: Thomas Chen <Thomas.Chen@intel.com>
Tested-by: Thomas Chen <Thomas.Chen@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250214002728.6287-1-qiuxu.zhuo@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3698dd6b13 ]
We observed an issue that the CPU frequency can't raise up with a 100% CPU
load when NOHZ is off and the 'conservative' governor is selected.
'idle_time' can be negative if it's obtained from get_cpu_idle_time_jiffy()
when NOHZ is off. This was found and explained in commit 9485e4ca0b
("cpufreq: governor: Fix handling of special cases in dbs_update()").
However, commit 7592019634 ("cpufreq: governors: Fix long idle detection
logic in load calculation") introduced a comparison between 'idle_time' and
'samling_rate' to detect a long idle interval. While 'idle_time' is
converted to int before comparison, it's actually promoted to unsigned
again when compared with an unsigned 'sampling_rate'. Hence, this leads to
wrong idle interval detection when it's in fact 100% busy and sets
policy_dbs->idle_periods to a very large value. 'conservative' adjusts the
frequency to minimum because of the large 'idle_periods', such that the
frequency can't raise up. 'Ondemand' doesn't use policy_dbs->idle_periods
so it fortunately avoids the issue.
Correct negative 'idle_time' to 0 before any use of it in dbs_update().
Fixes: 7592019634 ("cpufreq: governors: Fix long idle detection logic in load calculation")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250213035510.2402076-1-zhanjie9@hisilicon.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 563bc2161b ]
When a task is enqueued and its parent cgroup se is already on_rq, this
parent cgroup se will not be enqueued again, and hence the root->min_slice
leaves unchanged. The same issue happens when a task is dequeued and its
parent cgroup se has other runnable entities, and the parent cgroup se
will not be dequeued.
Force propagating min_slice when se doesn't need to be enqueued or
dequeued. Ensure the se hierarchy always get the latest min_slice.
Fixes: aef6987d89 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250211063659.7180-1-dtcccc@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f553741ac8 ]
A wakeup non-idle entity should preempt idle entity at any time,
but because of the slice protection of the idle entity, the non-idle
entity has to wait, so just cancel it.
This patch is aimed at minimizing the impact of SCHED_IDLE on
SCHED_NORMAL. For example, a task with SCHED_IDLE policy that sleeps for
1s and then runs for 3 ms, running cyclictest on the same cpu, has a
maximum latency of 3 ms, which is caused by the slice protection of the
idle entity. It is unreasonable. With this patch, the cyclictest latency
under the same conditions is basically the same on the cpu with idle
processes and on empty cpu.
[peterz: add helpers]
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208080850.16300-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cce0cc386 ]
Since inception [1], SMACK initializes ipv* child socket security
for connection-oriented communications (tcp/sctp/dccp)
during accept() syscall, in the security_sock_graft() hook:
| void smack_sock_graft(struct sock *sk, ...)
| {
| // only ipv4 and ipv6 are eligible here
| // ...
| ssp = sk->sk_security; // socket security
| ssp->smk_in = skp; // process label: smk_of_current()
| ssp->smk_out = skp; // process label: smk_of_current()
| }
This approach is incorrect for two reasons:
A) initialization occurs too late for child socket security:
The child socket is created by the kernel once the handshake
completes (e.g., for tcp: after receiving ack for syn+ack).
Data can legitimately start arriving to the child socket
immediately, long before the application calls accept()
on the socket.
Those data are (currently — were) processed by SMACK using
incorrect child socket security attributes.
B) Incoming connection requests are handled using the listening
socket's security, hence, the child socket must inherit the
listening socket's security attributes.
smack_sock_graft() initilizes the child socket's security with
a process label, as is done for a new socket()
But ... the process label is not necessarily the same as the
listening socket label. A privileged application may legitimately
set other in/out labels for a listening socket.
When this happens, SMACK processes incoming packets using
incorrect socket security attributes.
In [2] Michael Lontke noticed (A) and fixed it in [3] by adding
socket initialization into security_sk_clone_security() hook like
| void smack_sk_clone_security(struct sock *oldsk, struct sock *newsk)
| {
| *(struct socket_smack *)newsk->sk_security =
| *(struct socket_smack *)oldsk->sk_security;
| }
This initializes the child socket security with the parent (listening)
socket security at the appropriate time.
I was forced to revisit this old story because
smack_sock_graft() was left in place by [3] and continues overwriting
the child socket's labels with the process label,
and there might be a reason for this, so I undertook a study.
If the process label differs from the listening socket's labels,
the following occurs for ipv4:
assigning the smk_out is not accompanied by netlbl_sock_setattr,
so the outgoing packet's cipso label does not change.
So, the only effect of this assignment for interhost communications
is a divergence between the program-visible “out” socket label and
the cipso network label. For intrahost communications this label,
however, becomes visible via secmark netfilter marking, and is
checked for access rights by the client, receiving side.
Assigning the smk_in affects both interhost and intrahost
communications: the server begins to check access rights against
an wrong label.
Access check against wrong label (smk_in or smk_out),
unsurprisingly fails, breaking the connection.
The above affects protocols that calls security_sock_graft()
during accept(), namely: {tcp,dccp,sctp}/{ipv4,ipv6}
One extra security_sock_graft() caller, crypto/af_alg.c`af_alg_accept
is not affected, because smack_sock_graft() does nothing for PF_ALG.
To reproduce, assign non-default in/out labels to a listening socket,
setup rules between these labels and client label, attempt to connect
and send some data.
Ipv6 specific: ipv6 packets do not convey SMACK labels. To reproduce
the issue in interhost communications set opposite labels in
/smack/ipv6host on both hosts.
Ipv6 intrahost communications do not require tricking, because SMACK
labels are conveyed via secmark netfilter marking.
So, currently smack_sock_graft() is not useful, but harmful,
therefore, I have removed it.
This fixes the issue for {tcp,dccp}/{ipv4,ipv6},
but not sctp/{ipv4,ipv6}.
Although this change is necessary for sctp+smack to function
correctly, it is not sufficient because:
sctp/ipv4 does not call security_sk_clone() and
sctp/ipv6 ignores SMACK completely.
These are separate issues, belong to other subsystem,
and should be addressed separately.
[1] 2008-02-04,
Fixes: e114e47377 ("Smack: Simplified Mandatory Access Control Kernel")
[2] Michael Lontke, 2022-08-31, SMACK LSM checks wrong object label
during ingress network traffic
Link: https://lore.kernel.org/linux-security-module/6324997ce4fc092c5020a4add075257f9c5f6442.camel@elektrobit.com/
[3] 2022-08-31, michael.lontke,
commit 4ca165fc6c ("SMACK: Add sk_clone_security LSM hook")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfcf4004bc ]
I want to be sure that ipv6-specific code
is not compiled in kernel binaries
if ipv6 is not configured.
[1] was getting rid of "unused variable" warning, but,
with that, it also mandated compilation of a handful ipv6-
specific functions in ipv4-only kernel configurations:
smk_ipv6_localhost, smack_ipv6host_label, smk_ipv6_check.
Their compiled bodies are likely to be removed by compiler
from the resulting binary, but, to be on the safe side,
I remove them from the compiler view.
[1]
Fixes: 00720f0e7f ("smack: avoid unused 'sip' variable warning")
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4742da9774 ]
The CPU rate from clk_get_rate() may not be divisible by 1000
(e.g., 133333333). But the rate calculated from frequency(kHz) is
always divisible by 1000 (e.g., 133333000).
Comparing the rate causes a warning during CPU scaling:
"cpufreq: __target_index: Failed to change cpu frequency: -5".
When we choose to compare kHz here, the issue does not occur.
Fixes: 343a8d17fa ("cpufreq: scpi: remove arm_big_little dependency")
Signed-off-by: zuoqian <zuoqian113@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33ea120582 ]
The CPA_ARRAY test always uses len[1] as numpages argument to
change_page_attr_set() although the addresses array is different each
iteration of the test loop.
Replace len[1] with len[i] to have numpages matching the addresses array.
Fixes: ecc729f1f4 ("x86/mm/cpa: Add ARRAY and PAGES_ARRAY selftests")
Signed-off-by: "Mike Rapoport (Microsoft)" <rppt@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250126074733.1384926-2-rppt@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f13abc1e8e ]
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a26503092c upstream.
When flushing transmit side DMA, it is the transmit channel that should
be terminated, not the receive channel.
Fixes: 9e512eaaf8 ("serial: 8250: Fix fifo underflow on flush")
Cc: stable <stable@kernel.org>
Reported-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250224121831.1429323-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2790ce2395 upstream.
If stm32_usart_start_tx is called with an empty xmit buffer, RTS GPIO
could be deasserted prematurely, as bytes in TX FIFO are still
transmitting.
So this patch remove rts disable when xmit buffer is empty.
Fixes: d7c7671616 ("serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Cheick Traore <cheick.traore@foss.st.com>
Link: https://lore.kernel.org/r/20250320152540.709091-1-cheick.traore@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cced76a02 upstream.
In sysfs, the perf events are all located in
/sys/bus/event_source/devices/ but some places ended up hard-coding the
location to be at the root of /sys/devices/ which could be very risky as
you do not exactly know what type of device you are accessing in sysfs
at that location.
So fix this all up by properly pointing everything at the bus device
list instead of the root of the sysfs devices/ tree.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/2025021955-implant-excavator-179d@gregkh
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb0ba4cb10 upstream.
Two clearly different specimens of NEC uPD720200 (one with start/stop
bug, one without) were seen to cause IOMMU faults after some Missed
Service Errors. Faulting address is immediately after a transfer ring
segment and patched dynamic debug messages revealed that the MSE was
received when waiting for a TD near the end of that segment:
[ 1.041954] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ffa08fe0
[ 1.042120] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09000 flags=0x0000]
[ 1.042146] xhci_hcd: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0005 address=0xffa09040 flags=0x0000]
It gets even funnier if the next page is a ring segment accessible to
the HC. Below, it reports MSE in segment at ff1e8000, plows through a
zero-filled page at ff1e9000 and starts reporting events for TRBs in
page at ff1ea000 every microframe, instead of jumping to seg ff1e6000.
[ 7.041671] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.041999] xhci_hcd: Miss service interval error for slot 1 ep 2 expected TD DMA ff1e8fe0
[ 7.042011] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042028] xhci_hcd: All TDs skipped for slot 1 ep 2. Clear skip flag.
[ 7.042134] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042138] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042144] xhci_hcd: Looking for event-dma 00000000ff1ea040 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.042259] xhci_hcd: WARN: buffer overrun event for slot 1 ep 2 on endpoint
[ 7.042262] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 31
[ 7.042266] xhci_hcd: Looking for event-dma 00000000ff1ea050 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
At some point completion events change from Isoch Buffer Overrun to
Short Packet and the HC finally finds cycle bit mismatch in ff1ec000.
[ 7.098130] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098132] xhci_hcd: Looking for event-dma 00000000ff1ecc50 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098254] xhci_hcd: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13
[ 7.098256] xhci_hcd: Looking for event-dma 00000000ff1ecc60 trb-start 00000000ff1e6820 trb-end 00000000ff1e6820
[ 7.098379] xhci_hcd: Overrun event on slot 1 ep 2
It's possible that data from the isochronous device were written to
random buffers of pending TDs on other endpoints (either IN or OUT),
other devices or even other HCs in the same IOMMU domain.
Lastly, an error from a different USB device on another HC. Was it
caused by the above? I don't know, but it may have been. The disk
was working without any other issues and generated PCIe traffic to
starve the NEC of upstream BW and trigger those MSEs. The two HCs
shared one x1 slot by means of a commercial "PCIe splitter" board.
[ 7.162604] usb 10-2: reset SuperSpeed USB device number 3 using xhci_hcd
[ 7.178990] sd 9:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x07 driverbyte=DRIVER_OK cmd_age=0s
[ 7.179001] sd 9:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 04 02 ae 00 00 02 00 00
[ 7.179004] I/O error, dev sdb, sector 67284480 op 0x0:(READ) flags 0x80700 phys_seg 5 prio class 0
Fortunately, it appears that this ridiculous bug is avoided by setting
the chain bit of Link TRBs on isochronous rings. Other ancient HCs are
known which also expect the bit to be set and they ignore Link TRBs if
it's not. Reportedly, 0.95 spec guaranteed that the bit is set.
The bandwidth-starved NEC HC running a 32KB/uframe UVC endpoint reports
tens of MSEs per second and runs into the bug within seconds. Chaining
Link TRBs allows the same workload to run for many minutes, many times.
No negative side effects seen in UVC recording and UAC playback with a
few devices at full speed, high speed and SuperSpeed.
The problem doesn't reproduce on the newer Renesas uPD720201/uPD720202
and on old Etron EJ168 and VIA VL805 (but the VL805 has other bug).
[shorten line length of log snippets in commit messge -Mathias]
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 58d0a3fab5 upstream.
Up until commit d56b0b2ab1 ("usb: xhci: ensure skipped isoc TDs are
returned when isoc ring is stopped") in v6.11, the driver didn't skip
missed isochronous TDs when handling Stoppend and Stopped - Length
Invalid events. Instead, it erroneously cleared the skip flag, which
would cause the ring to get stuck, as future events won't match the
missed TD which is never removed from the queue until it's cancelled.
This buggy logic seems to have been in place substantially unchanged
since the 3.x series over 10 years ago, which probably speaks first
and foremost about relative rarity of this case in normal usage, but
by the spec I see no reason why it shouldn't be possible.
After d56b0b2ab1, TDs are immediately skipped when handling those
Stopped events. This poses a potential problem in case of Stopped -
Length Invalid, which occurs either on completed TDs (likely already
given back) or Link and No-Op TRBs. Such event won't be recognized
as matching any TD (unless it's the rare Link TRB inside a TD) and
will result in skipping all pending TDs, giving them back possibly
before they are done, risking isoc data loss and maybe UAF by HW.
As a compromise, don't skip and don't clear the skip flag on this
kind of event. Then the next event will skip missed TDs. A downside
of not handling Stopped - Length Invalid on a Link inside a TD is
that if the TD is cancelled, its actual length will not be updated
to account for TRBs (silently) completed before the TD was stopped.
I had no luck producing this sequence of completion events so there
is no compelling demonstration of any resulting disaster. It may be
a very rare, obscure condition. The sole motivation for this patch
is that if such unlikely event does occur, I'd rather risk reporting
a cancelled partially done isoc frame as empty than gamble with UAF.
This will be fixed more properly by looking at Stopped event's TRB
pointer when making skipping decisions, but such rework is unlikely
to be backported to v6.12, which will stay around for a few years.
Fixes: d56b0b2ab1 ("usb: xhci: ensure skipped isoc TDs are returned when isoc ring is stopped")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ea396448f upstream.
commit 8a7d12d674 ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org
Fixes: 8a7d12d674 ("net: usb: usbnet: fix name regression")
Cc: stable@vger.kernel.org
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5cb528d64 upstream.
According to the LPUART reference manual, TXRTSE and TXRTSPOL of MODIR
register only can be changed when the transmitter is disabled.
So disable the transmitter before changing RS485 related registers and
re-enable it after the change is done.
Fixes: 67b0183786 ("tty: serial: lpuart: Add RS485 support for 32-bit uart flavour")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250312022503.1342990-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8744dcd4fc upstream.
In case the stm32_lptim_set_enable_state() fails to update CMP and ARR,
a timeout error is raised, by regmap_read_poll_timeout. It may happen,
when the lptimer runs on a slow clock, and the clock is gated only
few times during the polling.
Badly, when this happen, STM32_LPTIM_ENABLE in CR register has been set.
So the 'enable' state in sysfs wrongly lies on the counter being
correctly enabled, due to CR is read as one in stm32_lptim_is_enabled().
To fix both issues:
- enable the clock before writing CMP, ARR and polling ISR bits. It will
avoid the possible timeout error.
- clear the ENABLE bit in CR and disable the clock in the error path.
Fixes: d8958824cf ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250224170657.3368236-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 35ef1c79d2 upstream.
The mute LED on this HP laptop uses ALC236 and requires a quirk to function.
This patch enables the existing quirk for the device.
Tested on my laptop and the LED behaviour works as intended.
Cc: stable@vger.kernel.org
Signed-off-by: Dhruv Deshpande <dhrv.d@proton.me>
Link: https://patch.msgid.link/20250317085621.45056-1-dhrv.d@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 932b32ffd7 upstream.
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.
Closes: https://github.com/cilium/cilium/issues/37932
Fixes: eb31628e37 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc068194f5 upstream.
[Why]
Observe after suspend/resme, we can't light up mst monitors under specific
mst hub. The reason is that driver still writes DPCD DP_MSTM_CTRL after LT.
It's forbidden even we write the same value for that dpcd register.
[How]
We already resume the mst branch device dpcd settings during
resume_mst_branch_status(). Leverage drm_dp_mst_topology_queue_probe() to
only probe the topology, not calling drm_dp_mst_topology_mgr_resume() which
will set DP_MSTM_CTRL as well.
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de71d4e211 upstream.
Get rid of the nfsd4_legacy_tracking_ops->init() call in
check_for_legacy_methods(). That will be handled in the caller
(nfsd4_client_tracking_init()). Otherwise, we'll wind up calling
nfsd4_legacy_tracking_ops->init() twice, and the second time we'll
trigger the BUG_ON() in nfsd4_init_recdir().
Fixes: 74fd48739d ("nfsd: new Kconfig option for legacy client tracking")
Reported-by: Jur van der Burg <jur@avtware.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219580
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9821709af8 upstream.
Add mapping for headset mute key events.
Remove PLT_QUIRK_DOUBLE_VOLUME_KEYS quirk and made it generic.
The quirk logic did not keep track of the actual previous key
so any key event occurring in less than or equal to 5ms was ignored.
Remove PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS quirk.
It had the same logic issue as the double key quirk and was actually
masking the as designed behavior of most of the headsets.
It's occurrence should be minimized with the ALSA control naming
quirk that is part of the patch set.
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 486f6205c2 upstream.
Many Poly/Plantronics headset families name the feature, input,
and/or output units in a such a way to produce control names
that are not recognized by user space. As such, the volume and
mute events do not get routed to the headset's audio controls.
As an example from a product family:
The microphone mute control is named
Headset Microphone Capture Switch
and the headset volume control is named
Headset Earphone Playback Volume
The quirk fixes these to become
Headset Capture Switch
Headset Playback Volume
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c1f97a52c upstream.
Because of the size restriction in the TCP options space, the MPTCP
ADD_ADDR option is exclusive and cannot be sent with other MPTCP ones.
For this reason, in the linked mptcp_out_options structure, group of
fields linked to different options are part of the same union.
There is a case where the mptcp_pm_add_addr_signal() function can modify
opts->addr, but not ended up sending an ADD_ADDR. Later on, back in
mptcp_established_options, other options will be sent, but with
unexpected data written in other fields due to the union, e.g. in
opts->ext_copy. This could lead to a data stream corruption in the next
packet.
Using an intermediate variable, prevents from corrupting previously
established DSS option. The assignment of the ADD_ADDR option
parameters is now done once we are sure this ADD_ADDR option can be set
in the packet, e.g. after having dropped other suboptions.
Fixes: 1bff1e43a3 ("mptcp: optimize out option generation")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arthur Mongodin <amongodin@randorisec.fr>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
[ Matt: the commit message has been updated: long lines splits and some
clarifications. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-net-mptcp-fix-data-stream-corr-sockopt-v1-1-122dbb249db3@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14efb47935 upstream.
When an after-split folio is large and needs to be dropped due to EOF,
folio_put_refs(folio, folio_nr_pages(folio)) should be used to drop all
page cache refs. Otherwise, the folio will not be freed, causing memory
leak.
This leak would happen on a filesystem with blocksize > page_size and a
truncate is performed, where the blocksize makes folios split to >0 order
ones, causing truncated folios not being freed.
Link: https://lkml.kernel.org/r/20250310155727.472846-1-ziy@nvidia.com
Fixes: c010d47f10 ("mm: thp: split huge page to any lower order pages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Hugh Dickins <hughd@google.com>
Closes: https://lore.kernel.org/all/fcbadb7f-dd3e-21df-f9a7-2853b53183c4@google.com/
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38f4aa34a5 upstream.
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Fixes: db792e9adb ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250225170420.3898-1-justin@tidylabs.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a4ffec9fd upstream.
Initialize the pointer 'o' in options__order to NULL to prevent a
compiler warning/error which is observed when compiling with the '-Og'
option, but is not emitted by the compiler with the current default
compilation options.
For example, when compiling libsubcmd with
$ make "EXTRA_CFLAGS=-Og" -C tools/lib/subcmd/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile parse-options.c due
to following error:
parse-options.c: In function ‘options__order’:
parse-options.c:832:9: error: ‘o’ may be used uninitialized [-Werror=maybe-uninitialized]
832 | memcpy(&ordered[nr_opts], o, sizeof(*o));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
parse-options.c:810:30: note: ‘o’ was declared here
810 | const struct option *o, *p = opts;
| ^
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-4-ezulian@redhat.com
Signed-off-by: Bin Lan <bin.lan.cn@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76f970ce51 upstream.
This reverts commit eff6c8ce8d.
Hazem reported a 30% drop in UnixBench spawn test with commit
eff6c8ce8d ("sched/core: Reduce cost of sched_move_task when config
autogroup") on a m6g.xlarge AWS EC2 instance with 4 vCPUs and 16 GiB RAM
(aarch64) (single level MC sched domain):
https://lkml.kernel.org/r/20250205151026.13061-1-hagarhem@amazon.com
There is an early bail from sched_move_task() if p->sched_task_group is
equal to p's 'cpu cgroup' (sched_get_task_group()). E.g. both are
pointing to taskgroup '/user.slice/user-1000.slice/session-1.scope'
(Ubuntu '22.04.5 LTS').
So in:
do_exit()
sched_autogroup_exit_task()
sched_move_task()
if sched_get_task_group(p) == p->sched_task_group
return
/* p is enqueued */
dequeue_task() \
sched_change_group() |
task_change_group_fair() |
detach_task_cfs_rq() | (1)
set_task_rq() |
attach_task_cfs_rq() |
enqueue_task() /
(1) isn't called for p anymore.
Turns out that the regression is related to sgs->group_util in
group_is_overloaded() and group_has_capacity(). If (1) isn't called for
all the 'spawn' tasks then sgs->group_util is ~900 and
sgs->group_capacity = 1024 (single CPU sched domain) and this leads to
group_is_overloaded() returning true (2) and group_has_capacity() false
(3) much more often compared to the case when (1) is called.
I.e. there are much more cases of 'group_is_overloaded' and
'group_fully_busy' in WF_FORK wakeup sched_balance_find_dst_cpu() which
then returns much more often a CPU != smp_processor_id() (5).
This isn't good for these extremely short running tasks (FORK + EXIT)
and also involves calling sched_balance_find_dst_group_cpu() unnecessary
(single CPU sched domain).
Instead if (1) is called for 'p->flags & PF_EXITING' then the path
(4),(6) is taken much more often.
select_task_rq_fair(..., wake_flags = WF_FORK)
cpu = smp_processor_id()
new_cpu = sched_balance_find_dst_cpu(..., cpu, ...)
group = sched_balance_find_dst_group(..., cpu)
do {
update_sg_wakeup_stats()
sgs->group_type = group_classify()
if group_is_overloaded() (2)
return group_overloaded
if !group_has_capacity() (3)
return group_fully_busy
return group_has_spare (4)
} while group
if local_sgs.group_type > idlest_sgs.group_type
return idlest (5)
case group_has_spare:
if local_sgs.idle_cpus >= idlest_sgs.idle_cpus
return NULL (6)
Unixbench Tests './Run -c 4 spawn' on:
(a) VM AWS instance (m7gd.16xlarge) with v6.13 ('maxcpus=4 nr_cpus=4')
and Ubuntu 22.04.5 LTS (aarch64).
Shell & test run in '/user.slice/user-1000.slice/session-1.scope'.
w/o patch w/ patch
21005 27120
(b) i7-13700K with tip/sched/core ('nosmt maxcpus=8 nr_cpus=8') and
Ubuntu 22.04.5 LTS (x86_64).
Shell & test run in '/A'.
w/o patch w/ patch
67675 88806
CONFIG_SCHED_AUTOGROUP=y & /sys/proc/kernel/sched_autogroup_enabled equal
0 or 1.
Reported-by: Hazem Mohamed Abuelfotoh <abuehaze@amazon.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Hagar Hemdan <hagarhem@amazon.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250314151345.275739-1-dietmar.eggemann@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59419f1004 ]
In non-protected KVM modes, while the guest FPSIMD/SVE/SME state is live on the
CPU, the host's active SVE VL may differ from the guest's maximum SVE VL:
* For VHE hosts, when a VM uses NV, ZCR_EL2 contains a value constrained
by the guest hypervisor, which may be less than or equal to that
guest's maximum VL.
Note: in this case the value of ZCR_EL1 is immaterial due to E2H.
* For nVHE/hVHE hosts, ZCR_EL1 contains a value written by the guest,
which may be less than or greater than the guest's maximum VL.
Note: in this case hyp code traps host SVE usage and lazily restores
ZCR_EL2 to the host's maximum VL, which may be greater than the
guest's maximum VL.
This can be the case between exiting a guest and kvm_arch_vcpu_put_fp().
If a softirq is taken during this period and the softirq handler tries
to use kernel-mode NEON, then the kernel will fail to save the guest's
FPSIMD/SVE state, and will pend a SIGKILL for the current thread.
This happens because kvm_arch_vcpu_ctxsync_fp() binds the guest's live
FPSIMD/SVE state with the guest's maximum SVE VL, and
fpsimd_save_user_state() verifies that the live SVE VL is as expected
before attempting to save the register state:
| if (WARN_ON(sve_get_vl() != vl)) {
| force_signal_inject(SIGKILL, SI_KERNEL, 0, 0);
| return;
| }
Fix this and make this a bit easier to reason about by always eagerly
switching ZCR_EL{1,2} at hyp during guest<->host transitions. With this
happening, there's no need to trap host SVE usage, and the nVHE/nVHE
__deactivate_cptr_traps() logic can be simplified to enable host access
to all present FPSIMD/SVE/SME features.
In protected nVHE/hVHE modes, the host's state is always saved/restored
by hyp, and the guest's state is saved prior to exit to the host, so
from the host's PoV the guest never has live FPSIMD/SVE/SME state, and
the host's ZCR_EL1 is never clobbered by hyp.
Fixes: 8c8010d69c ("KVM: arm64: Save/restore SVE state for nVHE")
Fixes: 2e3cf82063 ("KVM: arm64: nv: Ensure correct VL is loaded before saving SVE state")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-9-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9dd00de1e ]
The shared hyp switch header has a number of static functions which
might not be used by all files that include the header, and when unused
they will provoke compiler warnings, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:703:13: warning: 'kvm_hyp_handle_dabt_low' defined but not used [-Wunused-function]
| 703 | static bool kvm_hyp_handle_dabt_low(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:682:13: warning: 'kvm_hyp_handle_cp15_32' defined but not used [-Wunused-function]
| 682 | static bool kvm_hyp_handle_cp15_32(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:662:13: warning: 'kvm_hyp_handle_sysreg' defined but not used [-Wunused-function]
| 662 | static bool kvm_hyp_handle_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:458:13: warning: 'kvm_hyp_handle_fpsimd' defined but not used [-Wunused-function]
| 458 | static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:329:13: warning: 'kvm_hyp_handle_mops' defined but not used [-Wunused-function]
| 329 | static bool kvm_hyp_handle_mops(struct kvm_vcpu *vcpu, u64 *exit_code)
| | ^~~~~~~~~~~~~~~~~~~
Mark these functions as 'inline' to suppress this warning. This
shouldn't result in any functional change.
At the same time, avoid the use of __alias() in the header and alias
kvm_hyp_handle_iabt_low() and kvm_hyp_handle_watchpt_low() to
kvm_hyp_handle_memory_fault() using CPP, matching the style in the rest
of the kernel. For consistency, kvm_hyp_handle_memory_fault() is also
marked as 'inline'.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-8-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9b66195063 ]
The hyp exit handling logic is largely shared between VHE and nVHE/hVHE,
with common logic in arch/arm64/kvm/hyp/include/hyp/switch.h. The code
in the header depends on function definitions provided by
arch/arm64/kvm/hyp/vhe/switch.c and arch/arm64/kvm/hyp/nvhe/switch.c
when they include the header.
This is an unusual header dependency, and prevents the use of
arch/arm64/kvm/hyp/include/hyp/switch.h in other files as this would
result in compiler warnings regarding missing definitions, e.g.
| In file included from arch/arm64/kvm/hyp/nvhe/hyp-main.c:8:
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:733:31: warning: 'kvm_get_exit_handler_array' used but never defined
| 733 | static const exit_handler_fn *kvm_get_exit_handler_array(struct kvm_vcpu *vcpu);
| | ^~~~~~~~~~~~~~~~~~~~~~~~~~
| ./arch/arm64/kvm/hyp/include/hyp/switch.h:735:13: warning: 'early_exit_filter' used but never defined
| 735 | static void early_exit_filter(struct kvm_vcpu *vcpu, u64 *exit_code);
| | ^~~~~~~~~~~~~~~~~
Refactor the logic such that the header doesn't depend on anything from
the C files. There should be no functional change as a result of this
patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-7-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 407a99c465 ]
When KVM is in VHE mode, the host kernel tries to save and restore the
configuration of CPACR_EL1.SMEN (i.e. CPTR_EL2.SMEN when HCR_EL2.E2H=1)
across kvm_arch_vcpu_load_fp() and kvm_arch_vcpu_put_fp(), since the
configuration may be clobbered by hyp when running a vCPU. This logic
has historically been broken, and is currently redundant.
This logic was originally introduced in commit:
861262ab86 ("KVM: arm64: Handle SME host state when running guests")
At the time, the VHE hyp code would reset CPTR_EL2.SMEN to 0b00 when
returning to the host, trapping host access to SME state. Unfortunately,
this was unsafe as the host could take a softirq before calling
kvm_arch_vcpu_put_fp(), and if a softirq handler were to use kernel mode
NEON the resulting attempt to save the live FPSIMD/SVE/SME state would
result in a fatal trap.
That issue was limited to VHE mode. For nVHE/hVHE modes, KVM always
saved/restored the host kernel's CPACR_EL1 value, and configured
CPTR_EL2.TSM to 0b0, ensuring that host usage of SME would not be
trapped.
The issue above was incidentally fixed by commit:
375110ab51 ("KVM: arm64: Fix resetting SME trap values on reset for (h)VHE")
That commit changed the VHE hyp code to configure CPTR_EL2.SMEN to 0b01
when returning to the host, permitting host kernel usage of SME,
avoiding the issue described above. At the time, this was not identified
as a fix for commit 861262ab86.
Now that the host eagerly saves and unbinds its own FPSIMD/SVE/SME
state, there's no need to save/restore the state of the EL0 SME trap.
The kernel can safely save/restore state without trapping, as described
above, and will restore userspace state (including trap controls) before
returning to userspace.
Remove the redundant logic.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Fuad Tabba <tabba@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250210195226.1215254-5-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
[Update for rework of flags storage -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Atish Patra
Aaron Kling
Rafael J. Wysocki
Peter Zijlstra
Kevin Loughlin
Arnd Bergmann
Benjamin Berg
Stanislav Spassov
Qiuxu Zhuo
Jie Zhan
Tianchen Ding
zihan zhou
Konstantin Andreev
zuoqian
Mike Rapoport (Microsoft)
Eric Sandeen
Greg Kroah-Hartman
Kent Overstreet
John Keeping
Cheick Traore
Luo Qiu
Michal Pecio
Dominique Martinet
Fabio Porcedda
Sherry Sun
Cameron Williams
William Breathitt Gray
Fabrice Gasnier
Dhruv Deshpande
Maxim Mikityanskiy
Wayne Lin
Scott Mayhew
Minjoong Kim
Terry Junge
Arthur Mongodin
Zi Yan
Justin Klaassen
Eder Zulian
Dietmar Eggemann
Mark Rutland