[ Upstream commit fc6298086b ]
This reverts commit ec9fd499b9.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-9-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec9fd499b9 ]
The Root Complex specific device tree binding for pcie-dw-rockchip has the
'sys' interrupt marked as required.
The driver requests the 'sys' IRQ unconditionally, and errors out if not
provided.
Thus, we can unconditionally set 'use_linkup_irq', so dw_pcie_host_init()
doesn't wait for the link to come up.
This will skip the wait for link up (since the bus will be enumerated once
the link up IRQ is triggered), which reduces the bootup time.
Link: https://lore.kernel.org/r/20250113-rockchip-no-wait-v1-1-25417f37b92f@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Stable-dep-of: fc6298086b ("Revert "PCI: dw-rockchip: Don't wait for link since we can detect Link Up"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dae65913b ]
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind.
Fixes: cc8bbe1a83 ("memory: mediatek: Add SMI driver")
Fixes: 038ae37c51 ("memory: mtk-smi: add missing put_device() call in mtk_smi_device_link_common")
Cc: stable@vger.kernel.org # 4.6: 038ae37c51
Cc: stable@vger.kernel.org # 4.6
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121164624.13685-3-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cfa038bdd ]
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind.
Fixes: 4740475770 ("memory: mtk-smi: Add device link for smi-sub-common")
Fixes: 038ae37c51 ("memory: mtk-smi: add missing put_device() call in mtk_smi_device_link_common")
Cc: stable@vger.kernel.org # 5.16: 038ae37c51
Cc: stable@vger.kernel.org # 5.16
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121164624.13685-2-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adbf61cc47 ]
ACPI v6.3 defined a new "Online Capable" MADT LAPIC flag. This bit is
used in conjunction with the "Enabled" MADT LAPIC flag to determine if
a CPU can be enabled/hotplugged by the OS after boot.
Before the new bit was defined, the "Enabled" bit was explicitly
described like this (ACPI v6.0 wording provided):
"If zero, this processor is unusable, and the operating system
support will not attempt to use it"
This means that CPU hotplug (based on MADT) is not possible. Many BIOS
implementations follow this guidance. They may include LAPIC entries in
MADT for unavailable CPUs, but since these entries are marked with
"Enabled=0" it is expected that the OS will completely ignore these
entries.
However, QEMU will do the same (include entries with "Enabled=0") for
the purpose of allowing CPU hotplug within the guest.
Comment from QEMU function pc_madt_cpu_entry():
/* ACPI spec says that LAPIC entry for non present
* CPU may be omitted from MADT or it must be marked
* as disabled. However omitting non present CPU from
* MADT breaks hotplug on linux. So possible CPUs
* should be put in MADT but kept disabled.
*/
Recent Linux topology changes broke the QEMU use case. A following fix
for the QEMU use case broke bare metal topology enumeration.
Rework the Linux MADT LAPIC flags check to allow the QEMU use case only
for guests and to maintain the ACPI spec behavior for bare metal.
Remove an unnecessary check added to fix a bare metal case introduced by
the QEMU "fix".
[ bp: Change logic as Michal suggested. ]
[ mingo: Removed misapplied -stable tag. ]
Fixes: fed8d8773b ("x86/acpi/boot: Correct acpi_is_processor_usable() check")
Fixes: f0551af021 ("x86/topology: Ignore non-present APIC IDs in a present package")
Closes: https://lore.kernel.org/r/20251024204658.3da9bf3f.michal.pecio@gmail.com
Reported-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Michal Pecio <michal.pecio@gmail.com>
Tested-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Link: https://lore.kernel.org/20251111145357.4031846-1-yazen.ghannam@amd.com
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39195990e4 ]
fb82437fdd ("PCI: Change capability register offsets to hex") incorrectly
converted the PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 value from decimal 52 to hex
0x32:
-#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
+#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 0x32 /* end of v2 EPs w/ link */
This broke PCI capabilities in a VMM because subsequent ones weren't
DWORD-aligned.
Change PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 to the correct value of 0x34.
fb82437fdd was from Baruch Siach <baruch@tkos.co.il>, but this was not
Baruch's fault; it's a mistake I made when applying the patch.
Fixes: fb82437fdd ("PCI: Change capability register offsets to hex")
Reported-by: David Woodhouse <dwmw2@infradead.org>
Closes: https://lore.kernel.org/all/3ae392a0158e9d9ab09a1d42150429dd8ca42791.camel@infradead.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7bf516c3e ]
get_upper_ifindexes() iterates over all upper devices and writes their
indices into an array without checking bounds.
Also the callers assume that the max number of upper devices is
MAX_NEST_DEV and allocate excluded_devices[1+MAX_NEST_DEV] on the stack,
but that assumption is not correct and the number of upper devices could
be larger than MAX_NEST_DEV (e.g., many macvlans), causing a
stack-out-of-bounds write.
Add a max parameter to get_upper_ifindexes() to avoid the issue.
When there are too many upper devices, return -EOVERFLOW and abort the
redirect.
To reproduce, create more than MAX_NEST_DEV(8) macvlans on a device with
an XDP program attached using BPF_F_BROADCAST | BPF_F_EXCLUDE_INGRESS.
Then send a packet to the device to trigger the XDP redirect path.
Reported-by: syzbot+10cc7f13760b31bd2e61@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/698c4ce3.050a0220.340abe.000b.GAE@google.com/T/
Fixes: aeea1b86f9 ("bpf, devmap: Exclude XDP broadcast to master device")
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Link: https://lore.kernel.org/r/20260225053506.4738-1-kohei@enjuk.jp
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef06fd16d4 ]
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field.
Fixes: b2ad54e153 ("bpf, arm64: Implement bpf_arch_text_poke() for arm64")
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20260226075525.233321-1-tabba@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 587bb33b10 ]
Commit d7f67ac9a9 ("btrfs: relax block-group-tree feature dependency
checks") introduced a regression when it comes to handling unsupported
incompat or compat_ro flags. Beforehand we only printed the flags that
we didn't recognize, afterwards we printed them all, which is less
useful. Fix the error handling so it behaves like it used to.
Fixes: d7f67ac9a9 ("btrfs: relax block-group-tree feature dependency checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c7e9111f4 ]
Fix the error message in btrfs_delete_subvolume() if we can't delete a
subvolume because it has an active swapfile: we were printing the number
of the parent rather than the target.
Fixes: 60021bd754 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44e2fda664 ]
Commit b471965fdb ("btrfs: fix replace/scrub failure with
metadata_uuid") fixed the comparison in scrub_verify_one_metadata() to
use metadata_uuid rather than fsid, but left the warning as it was. Fix
it so it matches what we're doing.
Fixes: b471965fdb ("btrfs: fix replace/scrub failure with metadata_uuid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a101727805 ]
Fix a copy-paste error in check_extent_data_ref(): we're printing root
as in the message above, we should be printing objectid.
Fixes: f333a3c7e8 ("btrfs: tree-checker: validate dref root and objectid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 511dc8912a ]
Fix the error message in check_dev_extent_item(), when an overlapping
stripe is encountered. For dev extents, objectid is the disk number and
offset the physical address, so prev_key->objectid should actually be
prev_key->offset.
(I can't take any credit for this one - this was discovered by Chris and
his friend Claude.)
Reported-by: Chris Mason <clm@fb.com>
Fixes: 008e2512dc ("btrfs: tree-checker: add dev extent item checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 003ce8c9b2 ]
In cs35l56_hda_posture_put() assign ucontrol->value.integer.value[0] to
a long instead of an unsigned long. ucontrol->value.integer.value[0] is
a long.
This fixes the sparse warning:
sound/hda/codecs/side-codecs/cs35l56_hda.c:256:20: warning: unsigned value
that used to be signed checked against zero?
sound/hda/codecs/side-codecs/cs35l56_hda.c:252:29: signed value source
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://patch.msgid.link/20260226111728.1700431-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 480ad5f6ea ]
Do not unlock psp->ras_context.mutex if it has not been locked. This has
been detected by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: YiPeng Chai <YiPeng.Chai@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: b3fb79cda5 ("drm/amdgpu: add mutex to protect ras shared memory")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa01b4335)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e0bcc7b88 ]
Mutexes must be unlocked before these are destroyed. This has been detected
by the Clang thread-safety analyzer.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Fixes: f5e4cc8461 ("drm/amdgpu: implement RAS ACA driver framework")
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 270258ba32)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c22533c66c ]
Endpoint drivers use dw_pcie_ep_raise_msix_irq() to raise an MSI-X
interrupt to the host using a writel(), which generates a PCI posted write
transaction. There's no completion for posted writes, so the writel() may
return before the PCI write completes. dw_pcie_ep_raise_msix_irq() also
unmaps the outbound ATU entry used for the PCI write, so the write races
with the unmap.
If the PCI write loses the race with the ATU unmap, the write may corrupt
host memory or cause IOMMU errors, e.g., these when running fio with a
larger queue depth against nvmet-pci-epf:
arm-smmu-v3 fc900000.iommu: 0x0000010000000010
arm-smmu-v3 fc900000.iommu: 0x0000020000000000
arm-smmu-v3 fc900000.iommu: 0x000000090000f040
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: event: F_TRANSLATION client: 0000:01:00.0 sid: 0x100 ssid: 0x0 iova: 0x90000f040 ipa: 0x0
arm-smmu-v3 fc900000.iommu: unpriv data write s1 "Input address caused fault" stag: 0x0
Flush the write by performing a readl() of the same address to ensure that
the write has reached the destination before the ATU entry is unmapped.
The same problem was solved for dw_pcie_ep_raise_msi_irq() in commit
8719c64e76 ("PCI: dwc: ep: Cache MSI outbound iATU mapping"), but there
it was solved by dedicating an outbound iATU only for MSI. We can't do the
same for MSI-X because each vector can have a different msg_addr and the
msg_addr may be changed while the vector is masked.
Fixes: beb4641a78 ("PCI: dwc: Add MSI-X callbacks handler")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260211175540.105677-2-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fafc38b77 ]
Use the dw_pcie_ep_align_addr() function to calculate the alignment in
dw_pcie_ep_raise_{msi,msix}_irq() instead of open coding the same.
Link: https://lore.kernel.org/r/20241017132052.4014605-6-cassel@kernel.org
Link: https://lore.kernel.org/r/20241104205144.409236-2-cassel@kernel.org
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[kwilczynski: squashed patch that fixes memory map sizes]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c22533c66c ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e73ea1c2d4 ]
The function dw_pcie_prog_outbound_atu() used to program outbound ATU
entries for mapping RC PCI addresses to local CPU addresses does not
allow PCI addresses that are not aligned to the value of region_align
of struct dw_pcie. This value is determined from the iATU hardware
registers during probing of the iATU (done by dw_pcie_iatu_detect()).
This value is thus valid for all DWC PCIe controllers, and valid
regardless of the hardware configuration used when synthesizing the
DWC PCIe controller.
Implement the ->align_addr() endpoint controller operation to allow
this mapping alignment to be transparently handled by endpoint function
drivers through the function pci_epc_mem_map().
Link: https://lore.kernel.org/linux-pci/20241012113246.95634-7-dlemoal@kernel.org
Link: https://lore.kernel.org/linux-pci/20241015090712.112674-1-dlemoal@kernel.org
Link: https://lore.kernel.org/linux-pci/20241017132052.4014605-5-cassel@kernel.org
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[mani: squashed the patch that changed phy_addr_t to u64]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: squashed patch that updated the pci_size variable]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c22533c66c ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce1dfe6d32 ]
Some endpoint controllers have requirements on the alignment of the
controller physical memory address that must be used to map a RC PCI
address region. For instance, the endpoint controller of the RK3399 SoC
uses at most the lower 20 bits of a physical memory address region as
the lower bits of a RC PCI address region. For mapping a PCI address
region of size bytes starting from pci_addr, the exact number of
address bits used is the number of address bits changing in the address
range [pci_addr..pci_addr + size - 1]. For this example, this creates
the following constraints:
1) The offset into the controller physical memory allocated for a
mapping depends on the mapping size *and* the starting PCI address
for the mapping.
2) A mapping size cannot exceed the controller windows size (1MB) minus
the offset needed into the allocated physical memory, which can end
up being a smaller size than the desired mapping size.
Handling these constraints independently of the controller being used
in an endpoint function driver is not possible with the current EPC
API as only the ->align field in struct pci_epc_features is provided
but used for BAR (inbound ATU mappings) mapping only. A new API is
needed for function drivers to discover mapping constraints and handle
non-static requirements based on the RC PCI address range to access.
Introduce the endpoint controller operation ->align_addr() to allow
the EPC core functions to obtain the size and the offset into a
controller address region that must be allocated and mapped to access
a RC PCI address region. The size of the mapping provided by the
align_addr() operation can then be used as the size argument for the
function pci_epc_mem_alloc_addr() and the offset into the allocated
controller memory provided can be used to correctly handle data
transfers. For endpoint controllers that have PCI address alignment
constraints, the align_addr() operation may indicate upon return an
effective PCI address mapping size that is smaller (but not 0) than the
requested PCI address region size.
The controller ->align_addr() operation is optional: controllers that
do not have any alignment constraints for mapping RC PCI address regions
do not need to implement this operation. For such controllers, it is
always assumed that the mapping size is equal to the requested size of
the PCI region and that the mapping offset is 0.
The function pci_epc_mem_map() is introduced to use this new controller
operation (if it is defined) to handle controller memory allocation and
mapping to a RC PCI address region in endpoint function drivers.
This function first uses the ->align_addr() controller operation to
determine the controller memory address size (and offset into) needed
for mapping an RC PCI address region. The result of this operation is
used to allocate a controller physical memory region using
pci_epc_mem_alloc_addr() and then to map that memory to the RC PCI
address space with pci_epc_map_addr().
Since ->align_addr() () may indicate that not all of a RC PCI address
region can be mapped, pci_epc_mem_map() may only partially map the RC
PCI address region specified. It is the responsibility of the caller
(an endpoint function driver) to handle such smaller mapping by
repeatedly using pci_epc_mem_map() over the desried PCI address range.
The counterpart of pci_epc_mem_map() to unmap and free a mapped
controller memory address region is pci_epc_mem_unmap().
Both functions operate using the new struct pci_epc_map data structure.
This new structure represents a mapping PCI address, mapping effective
size, the size of the controller memory needed for the mapping as well
as the physical and virtual CPU addresses of the mapping (phys_base and
virt_base fields). For convenience, the physical and virtual CPU
addresses within that mapping to use to access the target RC PCI address
region are also provided (phys_addr and virt_addr fields).
Endpoint function drivers can use struct pci_epc_map to access the
mapped RC PCI address region using the ->virt_addr and ->pci_size
fields.
Co-developed-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20241012113246.95634-4-dlemoal@kernel.org
[mani: squashed the patch that changed phy_addr_t to u64]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c22533c66c ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca3c342fb3 ]
Introduce the epc core helper function pci_epc_function_is_valid() to
verify that an epc pointer, a physical function number and a virtual
function number are all valid. This avoids repeating the code pattern:
if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
return err;
if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
return err;
in many functions of the endpoint controller core code.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20241012113246.95634-2-dlemoal@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: c22533c66c ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbc0fb3567 ]
Since delayed accounting of system time [1] the virtual timer is
forwarded by do_account_vtime() but also vtime_account_kernel(),
vtime_account_softirq(), and vtime_account_hardirq(). This leads
to double accounting of system, guest, softirq, and hardirq time.
Remove accounting from the vtime_account*() family to restore old behavior.
There is only one user of the vtimer interface, which might explain
why nobody noticed this so far.
Fixes: b7394a5f4c ("sched/cputime, s390: Implement delayed accounting of system time") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d785e2c32 ]
With the conversion to generic entry [1] cpu idle exit cpu time accounting
was converted from assembly to C. This introduced an reversed order of cpu
time accounting.
On cpu idle exit the current accounting happens with the following call
chain:
-> do_io_irq()/do_ext_irq()
-> irq_enter_rcu()
-> account_hardirq_enter()
-> vtime_account_irq()
-> vtime_account_kernel()
vtime_account_kernel() accounts the passed cpu time since last_update_timer
as system time, and updates last_update_timer to the current cpu timer
value.
However the subsequent call of
-> account_idle_time_irq()
will incorrectly subtract passed cpu time from timer_idle_enter to the
updated last_update_timer value from system_timer. Then last_update_timer
is updated to a sys_enter_timer, which means that last_update_timer goes
back in time.
Subsequently account_hardirq_exit() will account too much cpu time as
hardirq time. The sum of all accounted cpu times is still correct, however
some cpu time which was previously accounted as system time is now
accounted as hardirq time, plus there is the oddity that last_update_timer
goes back in time.
Restore previous behavior by extracting cpu time accounting code from
account_idle_time_irq() into a new update_timer_idle() function and call it
before irq_enter_rcu().
Fixes: 56e62a7370 ("s390: convert to generic entry") [1]
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9bc1753b3 ]
Make sure that __perf_event_overflow() runs with IRQs disabled for all
possible callchains. Specifically the software events can end up running
it with only preemption disabled.
This opens up a race vs perf_event_exit_event() and friends that will go
and free various things the overflow path expects to be present, like
the BPF program.
Fixes: 592903cdcb ("perf_counter: add an event_list")
Reported-by: Simond Hu <cmdhh1767@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Simond Hu <cmdhh1767@gmail.com>
Link: https://patch.msgid.link/20260224122909.GV1395416@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e9113c533 ]
Replace the remaining with inclusive terms; it's only this function
name we overlooked at the previous conversion.
Fixes: 53837b4ac2 ("ALSA: usb-audio: Replace slave/master terms")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fe8dec3f6 ]
We calculate the possible packet sizes beforehand for adaptive and
synchronous endpoints, but we didn't take care of the max frame size
for those pre-calculated values. When a device or a bus limits the
packet size, a high sample rate or a high number of channels may lead
to the packet sizes that are larger than the given limit, which
results in an error from the USB core at submitting URBs.
As a simple workaround, just add the sanity checks of pre-calculated
packet sizes to have the upper boundary of ep->maxframesize.
Fixes: f0bd62b640 ("ALSA: usb-audio: Improve frames size computation")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260225085233.316306-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62c015373e ]
Move the link recovery trigger from ufshcd_uic_pwr_ctrl() to
__ufshcd_wl_resume(). Ensure link recovery is only attempted when hibern8
exit fails during resume, not during hibern8 enter in suspend. Improve
error handling and prevent unnecessary link recovery attempts.
Fixes: 35dabf4503 ("scsi: ufs: core: Use link recovery when h8 exit fails during runtime resume")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223103906.2533654-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68230aac8b ]
Commit e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
incorrectly changed the 2nd parameter of cpuset_update_tasks_cpumask()
from tmp->new_cpus to cp->effective_cpus. This second parameter is just
a temporary cpumask for internal use. The cpuset_update_tasks_cpumask()
function was originally called update_tasks_cpumask() before commit
381b53c3b5 ("cgroup/cpuset: rename functions shared between v1
and v2").
This mistake can incorrectly change the effective_cpus of the
cpuset when it is the top_cpuset or in arm64 architecture where
task_cpu_possible_mask() may differ from cpu_possible_mask. So far
top_cpuset hasn't been passed to update_cpumasks_hier() yet, but arm64
arch can still be impacted. Fix it by reverting the incorrect change.
Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26d43a90be ]
The rseq registration validates that the rseq_size argument is greater
or equal to 32 (the original rseq size), but the comment associated with
this check does not clearly state this.
Clarify the comment to that effect.
Fixes: ee3e3ac05c ("rseq: Introduce extensible rseq ABI")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-2-mathieu.desnoyers@efficios.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa280a08e7 ]
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260106131504.679932-1-andrew.cooper3@citrix.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8cc55bf81 ]
Remove QUIRK_FLAG_VALIDATE_RATES for Focusrite. With the previous
commit, focusrite_valid_sample_rate() produces correct rate tables
without USB probing.
QUIRK_FLAG_VALIDATE_RATES sends SET_CUR requests for each rate (~25ms
each) and leaves the device at 192kHz. This is a problem because that
rate: 1) disables the internal mixer, so outputs are silent until an
application opens the PCM and sets a lower rate, and 2) the Air and
Safe modes get disabled.
Fixes: 5963e52621 ("ALSA: usb-audio: Enable rate validation for Scarlett devices")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/09b9c012024c998c4ca14bd876ef0dce0d0b6101.1771594828.git.g@b4.vu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d24148336 ]
scarlett2_add_dsp_ctls() was incorrectly storing the precomp and PEQ
filter coefficient control pointers into the precomp_flt_switch_ctls
and peq_flt_switch_ctls arrays instead of the intended targets
precomp_flt_ctls and peq_flt_ctls. Pass NULL instead, as the filter
coefficient control pointers are not used, and remove the unused
precomp_flt_ctls and peq_flt_ctls arrays from struct scarlett2_data.
Additionally, scarlett2_update_filter_values() was reading
dsp_input_count * peq_flt_count values for
SCARLETT2_CONFIG_PEQ_FLT_SWITCH, but the peq_flt_switch array is
indexed only by dsp_input_count (one switch per DSP input, not per
filter). Fix the read count.
Fixes: b64678eb4e ("ALSA: scarlett2: Add DSP controls")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/86497b71db060677d97c38a6ce5f89bb3b25361b.1771581197.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38353c26db ]
Commit e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled.
Fixes: e29c47fe89 ("scsi: pm8001: Simplify pm8001_task_exec()")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://patch.msgid.link/20260213192806.439432-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bffda93a51 ]
Using set_memory_wc() to enable write-combining for the DPP portion of
the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM
only, not MMIO mappings. In fact, as used currently triggers a BUG_ON()
with enabled CONFIG_DEBUG_VIRTUAL.
Simply map the DPP region separately and in addition to the already
existing mappings, avoiding any possible negative side effects for
these.
Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Reviewed-by: Mathias Krause <minipli@grsecurity.net>
Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1072020685 ]
PLIC ignores interrupt completion message for disabled interrupt, explained
by the specification:
The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the
claim/complete register. The PLIC does not check whether the completion
ID is the same as the last claim ID for that target. If the completion
ID does not match an interrupt source that is currently enabled for
the target, the completion is silently ignored.
This caused problems in the past, because an interrupt can be disabled
while still being handled and plic_irq_eoi() had no effect. That was fixed
by checking if the interrupt is disabled, and if so enable it, before
sending the completion message. That check is done with irqd_irq_disabled().
However, that is not sufficient because the enable bit for the handling
hart can be zero despite irqd_irq_disabled(d) being false. This can happen
when affinity setting is changed while a hart is still handling the
interrupt.
This problem is easily reproducible by dumping a large file to uart (which
generates lots of interrupts) and at the same time keep changing the uart
interrupt's affinity setting. The uart port becomes frozen almost
instantaneously.
Fix this by checking PLIC's enable bit instead of irqd_irq_disabled().
Fixes: cc9f04f9a8 ("irqchip/sifive-plic: Implement irq_set_affinity() for SMP host")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260212114125.3148067-1-namcao@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f66857bafd ]
When CONFIG_ARM64_POE is disabled, KVM does not save/restore POR_EL1.
However, ID_AA64MMFR3_EL1 sanitisation currently exposes the feature to
guests whenever the hardware supports it, ignoring the host kernel
configuration.
If a guest detects this feature and attempts to use it, the host will
fail to context-switch POR_EL1, potentially leading to state corruption.
Fix this by masking ID_AA64MMFR3_EL1.S1POE in the sanitised system
registers, preventing KVM from advertising the feature when the host
does not support it (i.e. system_supports_poe() is false).
Fixes: 70ed723829 ("KVM: arm64: Sanitise ID_AA64MMFR3_EL1")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260213143815.1732675-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fef0e649f8 ]
The logicvc_drm_config_parse() function calls of_get_child_by_name() to
find the "layers" node but fails to release the reference, leading to a
device node reference leak.
Fix this by using the __free(device_node) cleanup attribute to automatic
release the reference when the variable goes out of scope.
Fixes: efeeaefe9b ("drm: Add support for the LogiCVC display controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260130-logicvc_drm-v1-1-04366463750c@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5023ca80f9 ]
Before the referenced fixes these functions used a lookup function that
returned a pointer. This was changed to another lookup function that
returned an error code with the pointer becoming an out parameter.
The error path when the lookup failed was not changed to reflect this
change and the code continued to return the PTR_ERR of the now
uninitialized pointer. This could cause the vmw_translate_ptr functions
to return success when they actually failed causing further uninitialized
and OOB accesses.
Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com>
Fixes: a309c7194e ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Ian Forbes <ian.forbes@broadcom.com>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260113175357.129285-1-ian.forbes@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 211ecfaaef ]
The kref_put() call uses (void *)kvfree as the release callback, which
is incorrect. kref_put() expects a function with signature
void (*release)(struct kref *), but kvfree has signature
void (*)(const void *). Calling through an incompatible function pointer
is undefined behavior.
The code only worked by accident because ref_count is the first member
of vmw_bo_dirty, making the kref pointer equal to the struct pointer.
Fix this by adding a proper release callback that uses container_of()
to retrieve the containing structure before freeing.
Fixes: c1962742ff ("drm/vmwgfx: Use kref in vmw_bo_dirty")
Signed-off-by: Brad Spengler <brad.spengler@opensrcsec.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260107171236.3573118-1-zack.rusin@broadcom.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit c5489d0433.
The commit introduces a call to ima_validate_range() in
arch/x86/kernel/setup.c, but the function declaration is not available
in the 6.12 stable tree, resulting in build failures due to implicit
function declaration errors across multiple stable branches.
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c198c272f ]
A recent commit fixed a resource leak on early registration failures but
for some reason left out the first error path which still leaks the
resources associated with the interface.
Fix up also the first error path so that the interface is always
released on errors.
Fixes: 1f4c9d8a10 ("most: core: fix resource leak in most_register_interface error paths")
Fixes: 723de0f917 ("staging: most: remove device from interface structure")
Cc: Christian Gromm <christian.gromm@microchip.com>
Cc: Navaneeth K <knavaneeth786@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260116162950.21578-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5cb94ba5f ]
Ben reports that when running with CONFIG_DEBUG_PREEMPT, using
__arch_counter_get_cntvct_stable() results in well deserves warnings,
as we access a per-CPU variable without preemption disabled.
Fix the issue by disabling preemption on reading the counter. We can
probably do a lot better by not disabling preemption on systems that
do not require horrible workarounds to return a valid counter value,
but this plugs the issue for the time being.
Fixes: 29cc0f3aa7 ("arm64: Force the use of CNTVCT_EL0 in __delay()")
Reported-by: Ben Horgan <ben.horgan@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/aZw3EGs4rbQvbAzV@e134344.arm.com
Tested-by: Ben Horgan <ben.horgan@arm.com>
Tested-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e764dd439d ]
Chris Mason noticed that there is a copy-paste error in a recent change
to xrep_dir_teardown that nulls out pointers after freeing the
resources.
Fixes: ba408d299a ("xfs: only call xf{array,blob}_destroy if we have a valid pointer")
Link: https://lore.kernel.org/linux-xfs/20260205194211.2307232-1-clm@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 524696a19e ]
Commit 469c1c9eb6 ("kernel-doc: Issue warnings that were silently
discarded") started emitting warnings for cases that were previously
silently discarded. One such case is in intel_wakeref.h:
Warning: drivers/gpu/drm/i915/intel_wakeref.h:156 expecting prototype
for __intel_wakeref_put(). Prototype was for INTEL_WAKEREF_PUT_ASYNC()
instead
Arguably kernel-doc should be able to handle this, as it's valid C, but
having the flags defined between the function declarator and the body is
just asking for trouble. Move the INTEL_WAKEREF_PUT_* macros away from
there, making kernel-doc's life easier.
While at it, reduce the unnecessary abstraction levels by removing the
enum, and append _MASK to INTEL_WAKEREF_PUT_DELAY for clarity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251215120908.3515578-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0585c53b21 ]
When building with clang older than 17 targeting architectures that use
asm goto for their get_user() and put_user(), such as arm64, after
commit f3d233daf0 ("ALSA: pcm: Relax __free() variable declarations"),
there are bogus errors around skipping over a variable declared with the
cleanup attribute:
sound/core/pcm_native.c:3308:6: error: cannot jump from this asm goto statement to one of its possible targets
if (put_user(result, &_xfern->result))
^
...
arch/arm64/include/asm/uaccess.h:298:2: note: expanded from macro '__put_mem_asm'
asm goto(
^
sound/core/pcm_native.c:3295:6: note: possible target of asm goto statement
if (put_user(0, &_xfern->result))
^
...
sound/core/pcm_native.c:3300:8: note: jump exits scope of variable with __attribute__((cleanup))
void *bufs __free(kfree) =
^
clang-17 fixed a bug in clang's jump scope checker [1] where all labels
in a function were checked as valid targets for all asm goto instances
in a function, regardless of whether they were actual targets in a
paricular asm goto's provided list of labels.
To workaround this, revert the change done to
snd_pcm_xfern_frames_ioctl() by commit f3d233daf0 ("ALSA: pcm: Relax
__free() variable declarations") to avoid a variable declared with
cleanup from existing between multiple uses of asm goto. There are no
other uses of cleanup in this function so there should be low risk from
moving this variable back to the top of the function.
Link: https://github.com/ClangBuiltLinux/linux/issues/1886 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512190802.i4Jzbcsl-lkp@intel.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260106-pcm_native-revert-var-move-free-for-old-clang-v1-1-06a03693423d@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
