[ Upstream commit d7d2fcf7ae ]
There is a race between operations that iterate over the userdata
cg_children list and concurrent add/remove of userdata items through
configfs. The update_userdata() function iterates over the
nt->userdata_group.cg_children list, and count_extradata_entries() also
iterates over this same list to count nodes.
Quoting from Documentation/filesystems/configfs.rst:
> A subsystem can navigate the cg_children list and the ci_parent pointer
> to see the tree created by the subsystem. This can race with configfs'
> management of the hierarchy, so configfs uses the subsystem mutex to
> protect modifications. Whenever a subsystem wants to navigate the
> hierarchy, it must do so under the protection of the subsystem
> mutex.
Without proper locking, if a userdata item is added or removed
concurrently while these functions are iterating, the list can be
accessed in an inconsistent state. For example, the list_for_each() loop
can reach a node that is being removed from the list by list_del_init()
which sets the nodes' .next pointer to point to itself, so the loop will
never end (or reach the WARN_ON_ONCE in update_userdata() ).
Fix this by holding the configfs subsystem mutex (su_mutex) during all
operations that iterate over cg_children.
This includes:
- userdatum_value_store() which calls update_userdata() to iterate over
cg_children
- All sysdata_*_enabled_store() functions which call
count_extradata_entries() to iterate over cg_children
The su_mutex must be acquired before dynamic_netconsole_mutex to avoid
potential lock ordering issues, as configfs operations may already hold
su_mutex when calling into our code.
Fixes: df03f830d0 ("net: netconsole: cache userdata formatted string in netconsole_target")
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Link: https://patch.msgid.link/20251029-netconsole-fix-warn-v1-1-0d0dd4622f48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c211f5d7cb ]
After registering a VLAN device and setting its feature flags, we need to
synchronize the VLAN features with the lower device. For example, the VLAN
device does not have the NETIF_F_LRO flag, it should be synchronized with
the lower device based on the NETIF_F_UPPER_DISABLES definition.
As the dev->vlan_features has changed, we need to call
netdev_update_features(). The caller must run after netdev_upper_dev_link()
links the lower devices, so this patch adds the netdev_update_features()
call in register_vlan_dev().
Fixes: fd867d51f8 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251030073539.133779-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01f8136d4 ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d18a84edd ]
The internal switch on BCM63XX SoCs will unconditionally add 802.1Q VLAN
tags on egress to CPU when 802.1Q mode is enabled. We do this
unconditionally since commit ed409f3bba ("net: dsa: b53: Configure
VLANs while not filtering").
This is fine for VLAN aware bridges, but for standalone ports and vlan
unaware bridges this means all packets are tagged with the default VID,
which is 0.
While the kernel will treat that like untagged, this can break userspace
applications processing raw packets, expecting untagged traffic, like
STP daemons.
This also breaks several bridge tests, where the tcpdump output then
does not match the expected output anymore.
Since 0 isn't a valid VID, just strip out the VLAN tag if we encounter
it, unless the priority field is set, since that would be a valid tag
again.
Fixes: 964dbf186e ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251027194621.133301-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ab753b5d8 ]
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing.
Fixes: acd1638052 ("gve: Add initial PTP device support")
Reported-by: syzbot+c8c0e7ccabd456541612@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c8c0e7ccabd456541612
Signed-off-by: Tim Hostetler <thostet@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Joshua Washington <joshwash@google.com>
Link: https://patch.msgid.link/20251029184555.3852952-2-joshwash@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c21cf89a6 ]
The memory allocated for ptr using kvmalloc() is not freed on the last
error path. Fix that by freeing it on that error path.
Fixes: 9a24ce5e29 ("Bluetooth: btrtl: Firmware format v2 support")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c5f1f6468 ]
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data.
Reported-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a9a4bedfca6aa9d7fa24
Tested-by: syzbot+a9a4bedfca6aa9d7fa24@syzkaller.appspotmail.com
Fixes: afcb3369f4 ("Bluetooth: hci_event: Fix vendor (unknown) opcode status handling")
Signed-off-by: Raphael Pinsonneault-Thibeault <rpthibeault@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f838d624fd ]
Patch "Make HID attributes visible" is needed for older kernel versions
(e.g. 6.12) where ufs_get_device_desc() is called from ufshcd_probe_hba().
In these older kernel versions ufshcd_get_device_desc() may be called
after the sysfs attributes have been added. In the upstream kernel however
ufshcd_get_device_desc() is called before ufs_sysfs_add_nodes(). See also
the ufshcd_device_params_init() call from ufshcd_init(). Hence, calling
sysfs_update_group() is not necessary.
See also commit 69f5eb78d4 ("scsi: ufs: core: Move the
ufshcd_device_init(hba, true) call") in kernel v6.13.
This patch fixes the following kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Cc: Peter Wang <peter.wang@mediatek.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251028222433.1108299-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9222582ec5 ]
This reverts commit 4b66d18918.
In [1], Ross Brown reports poor performance of WCN7850 after enabling
power save. Temporarily revert the fix; it will be re-enabled once
the issue is resolved.
Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 4b66d18918 ("wifi: ath12k: Fix missing station power save configuration")
Reported-by: Ross Brown <true.robot.ross@gmail.com>
Closes: https://lore.kernel.org/all/CAMn66qZENLhDOcVJuwUZ3ir89PVtVnQRq9DkV5xjJn1p6BKB9w@mail.gmail.com/ # [1]
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028060744.897198-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74f038fa5 ]
The pt_dump_seq_puts() macro incorrectly uses seq_printf() instead of
seq_puts(). This is both a performance issue and conceptually wrong,
as the macro name suggests plain string output (puts) but the
implementation uses formatted output (printf).
The macro is used in ptdump.c:301 to output a newline character. Using
seq_printf() adds unnecessary overhead for format string parsing when
outputting this constant string.
This bug was introduced in commit 59c4da8640 ("riscv: Add support to
dump the kernel page tables") in 2020, which copied the implementation
pattern from other architectures that had the same bug.
Fixes: 59c4da8640 ("riscv: Add support to dump the kernel page tables")
Signed-off-by: Josephine Pfeiffer <hi@josie.lol>
Link: https://lore.kernel.org/r/20251018170451.3355496-1-hi@josie.lol
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060ea84a48 ]
Unwinding the stack of a task other than current, KASAN would report
"BUG: KASAN: out-of-bounds in walk_stackframe+0x41c/0x460"
There is a same issue on x86 and has been resolved by the commit
84936118bd ("x86/unwind: Disable KASAN checks for non-current tasks")
The solution could be applied to RISC-V too.
This patch also can solve the issue:
https://seclists.org/oss-sec/2025/q4/23
Fixes: 5d8544e2d0 ("RISC-V: Generic library routines and assembly")
Co-developed-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://lore.kernel.org/r/20251022072608.743484-1-zhangchunyan@iscas.ac.cn
[pjw@kernel.org: clean up checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c74dc8ab47 ]
ufs_sysfs_add_nodes() is called concurrently with ufs_get_device_desc().
This may cause the following code to be called before
ufs_sysfs_add_nodes():
sysfs_update_group(&hba->dev->kobj, &ufs_sysfs_hid_group);
If this happens, ufs_sysfs_add_nodes() triggers a kernel warning and
fails. Fix this by calling ufs_sysfs_add_nodes() before SCSI LUNs are
scanned since the sysfs_update_group() call happens from the context of
thread that executes ufshcd_async_scan(). This patch fixes the following
kernel warning:
sysfs: cannot create duplicate filename '/devices/platform/3c2d0000.ufs/hid'
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0x104
dump_stack+0x18/0x3c
sysfs_warn_dup+0x6c/0xc8
internal_create_group+0x1c8/0x504
sysfs_create_groups+0x38/0x9c
ufs_sysfs_add_nodes+0x20/0x58
ufshcd_init+0x1114/0x134c
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__device_attach_driver+0x15c/0x1f4
bus_for_each_drv+0x10c/0x168
__device_attach_async_helper+0x80/0xf8
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
ufshcd 3c2d0000.ufs: ufs_sysfs_add_nodes: sysfs groups creation failed (err = -17)
Cc: Daniel Lee <chullee@google.com>
Fixes: bb7663dec6 ("scsi: ufs: sysfs: Make HID attributes visible")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251014200118.3390839-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a04ea57aae upstream.
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8 ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa997d2d2a upstream.
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Reported-by: syzbot+92a3745cea5ec6360309@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/690babec.050a0220.baf87.0064.GAE@google.com/
Link: https://lore.kernel.org/20251016132848.1b11bb37@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c91afa7610 upstream.
__unregister_trace_fprobe() checks tf->tuser to put it when removing
tprobe. However, disable_trace_fprobe() does not use it and only calls
unregister_fprobe(). Thus it forgets to disable tracepoint_user.
If the trace_fprobe has tuser, put it for unregistering the tracepoint
callbacks when disabling tprobe correctly.
Link: https://lore.kernel.org/all/176244794466.155515.3971904050506100243.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10d9dda426 upstream.
Since __tracepoint_user_init() calls tracepoint_user_register() without
initializing tuser->tpoint with given tracpoint, it does not register
tracepoint stub function as callback correctly, and tprobe does not work.
Initializing tuser->tpoint correctly before tracepoint_user_register()
so that it sets up tracepoint callback.
I confirmed below example works fine again.
echo "t sched_switch preempt prev_pid=prev->pid next_pid=next->pid" > /sys/kernel/tracing/dynamic_events
echo 1 > /sys/kernel/tracing/events/tracepoints/sched_switch/enable
cat /sys/kernel/tracing/trace_pipe
Link: https://lore.kernel.org/all/176244793514.155515.6466348656998627773.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27afd6e066 upstream.
vb2_ioctl_remove_bufs() call manipulates queue internal buffer list,
potentially overwriting some pointers used by the legacy fileio access
mode. Forbid that ioctl when fileio is active to protect internal queue
state between subsequent read/write calls.
CC: stable@vger.kernel.org
Fixes: a3293a8538 ("media: v4l2: Add REMOVE_BUFS ioctl")
Reported-by: Shuangpeng Bai <SJB7183@psu.edu>
Closes: https://lore.kernel.org/linux-media/5317B590-AAB4-4F17-8EA1-621965886D49@psu.edu/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 758dbc756a upstream.
Some devices, like the Grandstream GUV3100 webcam, have an invalid UVC
descriptor where multiple entities share the same ID, this is invalid
and makes it impossible to make a proper entity tree without heuristics.
We have recently introduced a change in the way that we handle invalid
entities that has caused a regression on broken devices.
Implement a new heuristic to handle these devices properly.
Reported-by: Angel4005 <ooara1337@gmail.com>
Closes: https://lore.kernel.org/linux-media/CAOzBiVuS7ygUjjhCbyWg-KiNx+HFTYnqH5+GJhd6cYsNLT=DaA@mail.gmail.com/
Fixes: 0e2ee70291 ("media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2618849f31 upstream.
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16c43a56b7 upstream.
Even if normally `build_error` isn't a kernel object, it should still
be treated as such so that we pass the same flags. Similarly, `rustdoc`
targets are never kernel objects, but we need to treat them as such.
Otherwise, starting with Rust 1.91.0 (released 2025-10-30), `rustc`
will complain about missing sanitizer flags since `-Zsanitizer` is a
target modifier too [1]:
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `build_error`
--> rust/build_error.rs:3:1
|
3 | //! Build-time error.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
Thus explicitly mark them as kernel objects.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/138736 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fad472efab upstream.
The `rustdoc` modifiers bug [1] was fixed in Rust 1.90.0 [2], for which
we added a workaround in commit abbf9a4494 ("rust: workaround `rustdoc`
target modifiers bug").
However, `rustdoc`'s doctest generation still has a similar issue [3],
being fixed at [4], which does not affect us because we apply the
workaround to both, and now, starting with Rust 1.91.0 (released
2025-10-30), `-Zsanitizer` is a target modifier too [5], which means we
fail with:
RUSTDOC TK rust/kernel/lib.rs
error: mixing `-Zsanitizer` will cause an ABI mismatch in crate `kernel`
--> rust/kernel/lib.rs:3:1
|
3 | //! The `kernel` crate.
| ^
|
= help: the `-Zsanitizer` flag modifies the ABI so Rust crates compiled with different values of this flag cannot be used together safely
= note: unset `-Zsanitizer` in this crate is incompatible with `-Zsanitizer=kernel-address` in dependency `core`
= help: set `-Zsanitizer=kernel-address` in this crate or unset `-Zsanitizer` in `core`
= help: if you are sure this will not cause problems, you may use `-Cunsafe-allow-abi-mismatch=sanitizer` to silence this error
A simple way around is to add the sanitizer to the list in the existing
workaround (especially if we had not started to pass the sanitizer
flags in the previous commit, since in that case that would not be
necessary). However, that still applies the workaround in more cases
than necessary.
Instead, only modify the doctests flags to ignore the check for
sanitizers, so that it is more local (and thus the compiler keeps checking
it for us in the normal `rustdoc` calls). Since the previous commit
already treated the `rustdoc` calls as kernel objects, this should allow
us in the future to easily remove this workaround when the time comes.
By the way, the `-Cunsafe-allow-abi-mismatch` flag overwrites previous
ones rather than appending, so it needs to be all done in the same flag.
Moreover, unknown modifiers are rejected, and thus we have to gate based
on the version too.
Finally, `-Zsanitizer-cfi-normalize-integers` is not affected (in Rust
1.91.0), so it is not needed in the workaround for the moment.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/issues/144521 [1]
Link: https://github.com/rust-lang/rust/pull/144523 [2]
Link: https://github.com/rust-lang/rust/issues/146465 [3]
Link: https://github.com/rust-lang/rust/pull/148068 [4]
Link: https://github.com/rust-lang/rust/pull/138736 [5]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Link: https://patch.msgid.link/20251102212853.1505384-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff4d2ef387 upstream.
The future move of pin-init to `syn` uncovers the following private
intra-doc link:
error: public documentation for `Devres` links to private item `Self::inner`
--> rust/kernel/devres.rs:106:7
|
106 | /// [`Self::inner`] is guaranteed to be initialized and is always accessed read-only.
| ^^^^^^^^^^^ this item is private
|
= note: this link will resolve properly if you pass `--document-private-items`
= note: `-D rustdoc::private-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::private_intra_doc_links)]`
Currently, when rendered, the link points to "nowhere" (an inexistent
anchor for a "method").
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: f5d3ef25d2 ("rust: devres: get rid of Devres' inner Arc")
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20251029071406.324511-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09b1704f5b upstream.
The future move of pin-init to `syn` uncovers the following broken
intra-doc link:
error: unresolved link to `crate::pin_init`
--> rust/kernel/sync/condvar.rs:39:40
|
39 | /// instances is with the [`pin_init`](crate::pin_init!) and [`new_condvar`] macros.
| ^^^^^^^^^^^^^^^^ no item named `pin_init` in module `kernel`
|
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Currently, when rendered, the link points to a literal `crate::pin_init!`
URL.
Thus fix it.
Cc: stable@vger.kernel.org
Fixes: 129e97be8e ("rust: pin-init: fix documentation links")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251029073344.349341-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 284922f4c5 ]
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22c73d52a6 ]
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53db6f25ee ]
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5824ccba9a ]
The Coverity Scan service has detected potential
race condition in ceph_ioctl_lazyio() [1].
The CID 1591046 contains explanation: "Check of thread-shared
field evades lock acquisition (LOCK_EVASION). Thread1 sets
fmode to a new value. Now the two threads have an inconsistent
view of fmode and updates to fields correlated with fmode
may be lost. The data guarded by this critical section may
be read while in an inconsistent state or modified by multiple
racing threads. In ceph_ioctl_lazyio: Checking the value of
a thread-shared field outside of a locked region to determine
if a locked operation involving that thread shared field
has completed. (CWE-543)".
The patch places fi->fmode field access under ci->i_ceph_lock
protection. Also, it introduces the is_file_already_lazy
variable that is set under the lock and it is checked later
out of scope of critical section.
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1591046
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ed1e29cf ]
The Coverity Scan service has detected the calling of
wait_for_completion_killable() without checking the return
value in ceph_lock_wait_for_completion() [1]. The CID 1636232
defect contains explanation: "If the function returns an error
value, the error value may be mistaken for a normal value.
In ceph_lock_wait_for_completion(): Value returned from
a function is not checked for errors before being used. (CWE-252)".
The patch adds the checking of wait_for_completion_killable()
return value and return the error code from
ceph_lock_wait_for_completion().
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1636232
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e97663760 ]
If reinitialization of one of the GPUs fails after reset, it logs
failure on all subsequent GPUs eventhough they have resumed
successfully.
A sample log where only device at 0000:95:00.0 had a failure -
amdgpu 0000:15:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:65:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:75:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:85:00.0: amdgpu: GPU reset(19) succeeded!
amdgpu 0000:95:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:e5:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:f5:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:05:00.0: amdgpu: GPU reset(19) failed
amdgpu 0000:15:00.0: amdgpu: GPU reset end with ret = -5
To avoid confusion, report the error for each device
separately and return the first error as the overall result.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7574f30337 ]
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c4ed5e073 ]
According to I2S specs audio data is sampled on the rising edge of the
clock and it can change on the falling one. When operating in normal mode
this SoC behaves the opposite so a clock polarity inversion is required
in this case.
This was tested on an OdroidC2 (Amlogic S905 SoC) board.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20251007-fix-i2s-polarity-v1-1-86704d9cda10@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66128f4287 ]
On m68k, check_sizetypes in headers_check reports:
./usr/include/asm/bootinfo-amiga.h:17: found __[us]{8,16,32,64} type without #include <linux/types.h>
This header file does not use any of the Linux-specific integer types,
but merely refers to them from comments, so this is a false positive.
As of commit c3a9d74ee4 ("kbuild: uapi: upgrade check_sizetypes()
warning to error"), this check was promoted to an error, breaking m68k
all{mod,yes}config builds.
Fix this by stripping simple comments before looking for Linux-specific
integer types.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/949f096337e28d50510e970ae3ba3ec9c1342ec0.1759753998.git.geert@linux-m68k.org
[nathan: Adjust comment and remove unnecessary escaping from slashes in
regex]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87064da2db ]
When using interrupt pin (INT A) as watchdog output all other
interrupt sources need to be disabled to avoid additional
resets. Resulting INT_A_MASK1 value is 55 (0x37).
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250902182235.6825-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e22f4d1321 ]
During kexec reboots, RTC alarms that are fired during the kernel
transition experience delayed execution. The new kernel would eventually
honor these alarms, but the interrupt handlers would only execute after
the driver probe is completed rather than at the intended alarm time.
This is because pending alarm interrupt status from the previous kernel
is not properly cleared during driver initialization, causing timing
discrepancies in alarm delivery.
To ensure precise alarm timing across kexec transitions, enhance the
probe function to:
1. Clear any pending alarm interrupt status from previous boot.
2. Detect existing valid alarms and preserve their state.
3. Re-enable alarm interrupts for future alarms.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/r/20250730142110.2354507-1-harini.t@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 328b80b29a ]
The ASUS ROG Zephyrus Duo 15 SE (GX551QS) with ALC 289 codec requires specific
pin configuration for proper volume control. Without this quirk, volume
adjustments produce a muffled sound effect as only certain channels attenuate,
leaving bass frequency at full volume.
Testing with hdajackretask confirms these pin tweaks fix the issue:
- Pin 0x17: Internal Speaker (LFE)
- Pin 0x1e: Internal Speaker
Signed-off-by: Adam Holliday <dochollidayxx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3637d34b35 ]
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b31f7f725c ]
To make libthermal more cross compile friendly use pkg-config to locate
libnl3. Only if that fails fall back to hardcoded /usr/include/libnl3.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1375152bb0 ]
Instead of preserving mode, timestamp, and owner, for the object files
during installation, just preserve the mode and timestamp.
When installing as root, the installed files should be owned by root.
When installing as user, --preserve=ownership doesn't work anyway. This
makes --preserve=ownership rather pointless.
Signed-off-by: Emil Dahl Juhl <juhl.emildahl@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38ce0209a ]
small_const_nbits is defined in asm-generic/bitsperlong.h which
bitmap.h uses but doesn't include causing build failures in some build
systems. Add the missing #include.
Note the bitmap.h in tools has diverged from that of the kernel, so no
changes are made there.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db740f5689 ]
The atomic instructions sc.q, llacq.{w/d}, screl.{w/d} were newly added
in the LoongArch Reference Manual v1.10, it is necessary to handle them
in insns_not_supported() to avoid putting a breakpoint in the middle of
a ll/sc atomic sequence, otherwise it will loop forever for kprobes and
uprobes.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9f866b2bb ]
fwnode_graph_get_next_subnode() may return fwnode backed by ACPI
device nodes and there has been no check these devices are present
in the system, unlike there has been on fwnode OF backend.
In order to provide consistent behaviour towards callers,
add a check for device presence by introducing
a new function acpi_get_next_present_subnode(), used as the
get_next_child_node() fwnode operation that also checks device
node presence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251001102636.1272722-2-sakari.ailus@linux.intel.com
[ rjw: Kerneldoc comment and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aad1d99bea ]
It could be triggered on 32 bit big endian machines at 32 bpp in the
pattern realignment. In this case just return early as the result is
an identity.
Signed-off-by: Zsolt Kajtar <soci@c64.rulez.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558ae45798 ]
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
