Commit graph

95,978 commits

Author SHA1 Message Date
Trond Myklebust
be527494e0 NFS: Remove unused function nfs_revalidate_mapping_protected()
Clean up...

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-05 19:11:05 -04:00
Trond Myklebust
a5864c999d NFS: Do not serialise O_DIRECT reads and writes
Allow dio requests to be scheduled in parallel, but ensuring that they
do not conflict with buffered I/O.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-07-05 19:11:04 -04:00
Namhyung Kim
a4a551b8f1 ftrace: Reduce size of function graph entries
Currently ftrace_graph_ent{,_entry} and ftrace_graph_ret{,_entry} struct
can have padding bytes at the end due to alignment in 64-bit data type.
As these data are recorded so frequently, those paddings waste
non-negligible space.  As the ring buffer maintains alignment properly
for each architecture, just to remove the extra padding using 'packed'
attribute.

  ftrace_graph_ent_entry:  24 -> 20
  ftrace_graph_ret_entry:  48 -> 44

Also I moved the 'overrun' field in struct ftrace_graph_ret to minimize
the padding in the middle.

Tested on x86_64 only.

Link: http://lkml.kernel.org/r/1467197808-13578-1-git-send-email-namhyung@kernel.org

Cc: Ingo Molnar <mingo@kernel.org>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-07-05 17:28:30 -04:00
Seth Forshee
8175435777 fs: Update i_[ug]id_(read|write) to translate relative to s_user_ns
For filesystems mounted from a user namespace on-disk ids should
be translated relative to s_users_ns rather than init_user_ns.

When an id in the filesystem doesn't exist in s_user_ns the
associated id in the inode will be set to INVALID_[UG]ID, which
turns these into de facto "nobody" ids. This actually maps pretty
well into the way most code already works, and those places where
it didn't were fixed in previous patches. Moving forward vfs code
needs to be careful to handle instances where ids in inodes may
be invalid.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-07-05 15:13:21 -05:00
Eric W. Biederman
d49d37624a quota: Ensure qids map to the filesystem
Introduce the helper qid_has_mapping and use it to ensure that the
quota system only considers qids that map to the filesystems
s_user_ns.

In practice for quota supporting filesystems today this is the exact
same check as qid_valid.  As only 0xffffffff aka (qid_t)-1 does not
map into init_user_ns.

Replace the qid_valid calls with qid_has_mapping as values come in
from userspace.  This is harmless today and it prepares the quota
system to work on filesystems with quotas but mounted by unprivileged
users.

Call qid_has_mapping from dqget.  This ensures the passed in qid has a
prepresentation on the underlying filesystem.  Previously this was
unnecessary as filesystesm never had qids that could not map.  With
the introduction of filesystems outside of s_user_ns this will not
remain true.

All of this ensures the quota code never has to deal with qids that
don't map to the underlying filesystem.

Cc: Jan Kara <jack@suse.cz>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-07-05 15:12:05 -05:00
Eric W. Biederman
0bd23d09b8 vfs: Don't modify inodes with a uid or gid unknown to the vfs
When a filesystem outside of init_user_ns is mounted it could have
uids and gids stored in it that do not map to init_user_ns.

The plan is to allow those filesystems to set i_uid to INVALID_UID and
i_gid to INVALID_GID for unmapped uids and gids and then to handle
that strange case in the vfs to ensure there is consistent robust
handling of the weirdness.

Upon a careful review of the vfs and filesystems about the only case
where there is any possibility of confusion or trouble is when the
inode is written back to disk.  In that case filesystems typically
read the inode->i_uid and inode->i_gid and write them to disk even
when just an inode timestamp is being updated.

Which leads to a rule that is very simple to implement and understand
inodes whose i_uid or i_gid is not valid may not be written.

In dealing with access times this means treat those inodes as if the
inode flag S_NOATIME was set.  Reads of the inodes appear safe and
useful, but any write or modification is disallowed.  The only inode
write that is allowed is a chown that sets the uid and gid on the
inode to valid values.  After such a chown the inode is normal and may
be treated as such.

Denying all writes to inodes with uids or gids unknown to the vfs also
prevents several oddball cases where corruption would have occurred
because the vfs does not have complete information.

One problem case that is prevented is attempting to use the gid of a
directory for new inodes where the directories sgid bit is set but the
directories gid is not mapped.

Another problem case avoided is attempting to update the evm hash
after setxattr, removexattr, and setattr.  As the evm hash includeds
the inode->i_uid or inode->i_gid not knowning the uid or gid prevents
a correct evm hash from being computed.  evm hash verification also
fails when i_uid or i_gid is unknown but that is essentially harmless
as it does not cause filesystem corruption.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-07-05 15:06:46 -05:00
Sagi Grimberg
7b89eae29e nvme.h: Add keep-alive opcode and identify controller attribute
KAS: keep-alive support and granularity of kato in units of 100 ms
nvme_admin_keep_alive opcode: 0x18

Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:18 -06:00
Christoph Hellwig
eb793e2c92 nvme.h: add NVMe over Fabrics definitions
The NVMe over Fabrics specification defines a protocol interface and
related extensions to NVMe that enable operation over network protocols.
The NVMe over Fabrics specification has an NVMe Transport binding for
each NVMe Transport.

This patch adds the fabrics related definitions:
- fabric specific command set and error codes
- transport addressing and binding definitions
- fabrics sgl extensions
- controller identification fabrics enhancements
- discovery log page definition

Signed-off-by: Armen Baloyan <armenx.baloyan@intel.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Jay Freyensee <james.p.freyensee@intel.com>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:14 -06:00
Ming Lin
1f5bd336b9 blk-mq: add blk_mq_alloc_request_hctx
For some protocols like NVMe over Fabrics we need to be able to send
initialization commands to a specific queue.

Based on an earlier patch from Christoph Hellwig <hch@lst.de>.

Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
[hch: disallow sleeping allocation, req_op fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2016-07-05 11:28:07 -06:00
Ido Schimmel
2a4501ae18 neigh: Send a notification when DELAY_PROBE_TIME changes
When the data plane is offloaded the traffic doesn't go through the
networking stack. Therefore, after first resolving a neighbour the NUD
state machine will transition it from REACHABLE to STALE until it's
finally deleted by the garbage collector.

To prevent such situations the offloading driver should notify the NUD
state machine on any neighbours that were recently used. The driver's
polling interval should be set so that the NUD state machine can
function as if the traffic wasn't offloaded.

Currently, there are no in-tree drivers that can report confirmation for
a neighbour, but only 'used' indication. Therefore, the polling interval
should be set according to DELAY_FIRST_PROBE_TIME, as a neighbour will
transition from REACHABLE state to DELAY (instead of STALE) if "a packet
was sent within the last DELAY_FIRST_PROBE_TIME seconds" (RFC 4861).

Send a netevent whenever the DELAY_FIRST_PROBE_TIME changes - either via
netlink or sysctl - so that offloading drivers can correctly set their
polling interval.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 09:06:29 -07:00
Jiri Pirko
18bfb924f0 net: introduce default neigh_construct/destroy ndo calls for L2 upper devices
L2 upper device needs to propagate neigh_construct/destroy calls down to
lower devices. Do this by defining default ndo functions and use them in
team, bond, bridge and vlan.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 09:06:28 -07:00
Jiri Pirko
503eebc265 net: add dev arg to ndo_neigh_construct/destroy
As the following patch will allow upper devices to follow the call down
lower devices, we need to add dev here and not rely on n->dev.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 09:06:28 -07:00
Salvatore Benedetto
8be0b84e58 crypto: rsa - Store rest of the private key components
When parsing a private key, store all non-optional fields. These
are required for enabling CRT mode for decrypt and verify

Signed-off-by: Salvatore Benedetto <salvatore.benedetto@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-05 23:05:26 +08:00
Alexandre TORGUE
fd1e71e248 includes: dt-bindings: Add STM32F746 pinctrl DT bindings
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05 16:58:02 +02:00
Subhransu S. Prusty
a5d5639f81 ASoC: dapm: Export snd_soc_dapm_new_control
This is useful outside the core, when one dapm element is added
at a time.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-05 16:56:41 +02:00
Yakir Yang
fcc150c515 drm/bridge: analogix_dp: passing the connector as an argument in .get_modes()
It's better to pass the connector to platform driver in .get_modes()
callback, just like what the .get_modes() helper function designed.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
2016-07-05 21:53:38 +08:00
Yakir Yang
82872e42bb drm/rockchip: analogix_dp: add rk3399 eDP support
RK3399 and RK3288 shared the same eDP IP controller, only some light
difference with VOP configure and GRF configure.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
2016-07-05 21:53:31 +08:00
Maor Gottlieb
6dc6071cfc net/mlx5e: Add ethtool flow steering support
Implement etrhtool set_rxnfc callback to support ethtool flow spec
direct steering. This patch adds only the support of ether flow type
spec. L3/L4 flow specs support will be added in downstream patches.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 00:06:02 -07:00
Maor Gottlieb
fba53f7b57 net/mlx5: Introduce mlx5_flow_steering structure
Instead of having all steering private name spaces and
steering module fields flat in mlx5_core_priv, we wrap
them in mlx5_flow_steering for better modularity and
API exposure.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 00:06:02 -07:00
Maor Gottlieb
c5bb17302e net/mlx5: Refactor mlx5_add_flow_rule
Reduce the set of arguments passed to mlx5_add_flow_rule
by introducing flow_spec structure.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05 00:06:02 -07:00
David S. Miller
b77af26a79 This feature patchset includes the following changes:
- Cleanup work by Markus Pargmann and Sven Eckelmann (six patches)
 
  - Initial Netlink support by Matthias Schiffer (two patches)
 
  - Throughput Meter implementation by Antonio Quartulli, a kernel-space
    traffic generator to estimate link speeds. This feature is useful on
    low-end WiFi APs where running iperf or netperf from userspace
    gives wrong results due to heavy userspace/kernelspace overhead.
    (two patches)
 
  - API clean-up work by Antonio Quartulli (one patch)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJXel3cAAoJEKEr45hCkp6hxs0P/jQZBJ37Bd4EHRGdhvCJWwsO
 j79zr7mIECub8a6PMkO1GI87ksJNtRdRw7XAIbLKTwsKEsUE0Gpv/MLLKgv/nD7X
 zatcoI4DujkgSojZIcOV/061+M9FAnCtAYv13jIS8nbXdqfGPxPfLua6Zbvx1GS2
 z/Rqg/WbB2qDtDlUrp0W/8oXQ+k6062G7GigroPLmjdWd5lF0H6ly4loWsxFyr0U
 GVl44HM4nOj7DwkVlrGoOXnAbjpz9TNC/aA5TIS/tLFZkm5dvJjjKLDbxo5NM9aq
 hRhFy8Gbe0TmOxV3mKZUT1oHuaHgFDY2tADLiLF2g/ijgaTetXCBJ6DXQ7BkiZnh
 +t1fnutOB1D05+cZGDmlfb2bFXO6vdDwNzKYuPdeW0tUOVwzNIaMK+US1HffUD3F
 ciK/cALsLbfJ3QkUHJclE57baMuB2c7YWJUxGdp2r4lKHak6tc8+BsornI6lB6qY
 kcxip6EEaT7edjT66Qjq8GtFK7WIri5nHI9n5Js+Wwl1QENvkLmZRQ6qZexwSplS
 RTZmmO+i+Y4rGDa3xoVSlC+CEUO7D4VwhET2Jir7KJrVS+pFNRAmfpUNWxeauAls
 D1xWgBrWjjOYu5i3LjwC6cHl4eTWxBwWmBUaxLUUeyoR22ulIs6bXCQMWOLMbupd
 q8k2B5BW9waTAgb4Tam9
 =PFHu
 -----END PGP SIGNATURE-----

Merge tag 'batadv-next-for-davem-20160704' of git://git.open-mesh.org/linux-merge

Simon Wunderlich says:

====================
This feature patchset includes the following changes:

 - Cleanup work by Markus Pargmann and Sven Eckelmann (six patches)

 - Initial Netlink support by Matthias Schiffer (two patches)

 - Throughput Meter implementation by Antonio Quartulli, a kernel-space
   traffic generator to estimate link speeds. This feature is useful on
   low-end WiFi APs where running iperf or netperf from userspace
   gives wrong results due to heavy userspace/kernelspace overhead.
   (two patches)

 - API clean-up work by Antonio Quartulli (one patch)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 23:33:59 -07:00
Olof Johansson
7cd4837ee2 Qualcomm ARM Based Driver Updates for v4.8
* Rework of SCM driver
 * Add file patterns for Qualcomm Maintainers entry
 * Add worker for wcnss_ctrl signaling
 * Fixes for smp2p
 * Update smem_state properties to match documentation
 * Add SCM Peripheral Authentication service
 * Expose SCM PAS command 10 as a reset controller
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXcaVxAAoJEFKiBbHx2RXVoxwQAMPI+3iN8M60JJ0SJvhP/VQA
 AlPUcuaS2j50K16srmLif4aG8JYReRI4SNdy0J1kaRRi9OAEHiyQ5yVVlDA+FTTT
 RErBxVzRUYyeCzrBpP1CL4khT+691QVx0dMcdlhnNRUttP3Cd42FM0J4GExWuDJO
 UuOVn1UV0PmgSNfmYzyk87LXOA1di7ZGht02Vnjnh+kcoVjUy4Ty/yLHzxGPYcaF
 RIj6lgYREtU7TN63MNkbYyx2FF+8WS9l5Q6U9E4Z/3nwRzhzhtPimWGtz1EHmxfy
 a8YXmkQYM3RvPa8Cigiyg5ubkLlPC7w2rkNExKUyC/Y/jbvE4l/XJNleCEiGZmMT
 f48F+7iAGgOwITL0+Lqj4VbKlUihwW28+OjcS/M5fTpDR6k0dmU0zHMhJKR9pYVU
 Cr7ucYcPvzF2M6d4Frre9tZski4DZkpke81xjf6HQ00gI2CaDV/lieXtFjikL/Cl
 ktdwQAo2+ydJ+7Ps5Qas2A+d66REe90vx2RCZWFRs9Nxe/CfSSz01LM6EeyONBKf
 XfQvbKc6V/ZVHkWkA/EILlfRFCho6KwpEAHpZpFt1NiplJXfUcDcQyy/CuIKLR4H
 c/UfKeGZCK+VyezbMWAKDb7ig3KywHD8yRieQpCyysVB/97oulJ/bHEs1KT5Bl5I
 uDjnR7KqyXJEOGANr5S2
 =WprH
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.8

* Rework of SCM driver
* Add file patterns for Qualcomm Maintainers entry
* Add worker for wcnss_ctrl signaling
* Fixes for smp2p
* Update smem_state properties to match documentation
* Add SCM Peripheral Authentication service
* Expose SCM PAS command 10 as a reset controller

* tag 'qcom-drivers-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  firmware: qcom: scm: Expose PAS command 10 as reset-controller
  firmware: qcom: scm: Peripheral Authentication Service
  soc: qcom: Update properties for smem state referencing
  soc: qcom: smp2p: Drop io-accessors
  soc: qcom: smp2p: Correct addressing of outgoing value
  soc: qcom: wcnss_ctrl: Make wcnss_ctrl parent the other components
  firmware: qcom: scm: Add support for ARM64 SoCs
  firmware: qcom: scm: Convert to streaming DMA APIS
  firmware: qcom: scm: Generalize shared error map
  firmware: qcom: scm: Use atomic SCM for cold boot
  firmware: qcom: scm: Convert SCM to platform driver
  MAINTAINERS: Add file patterns for qcom device tree bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-04 22:30:11 -07:00
Olof Johansson
a136deed01 SCPI updates and fixes for v4.8
1. Adds support for device power state management using generic power
    domains and runtime PM
 
 2. Other minor/miscellaneous fixes to the driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJXaQqwAAoJEABBurwxfuKYcL4QANeUJ+5igWpK97M64GQ44fR1
 msDxt44ylTY1CiAeHnDDrC0tFSUprOmigSCxx6ve8USHX6cuSmkBatt1eltVdAo5
 7/BZUGIAN8RzLpcHkNgYRu3DjOnEchq/vjSWAmfcF6HqLpInNtlaQPPh4ZC5UCSj
 AJljaeBPLXkTXzN1w6sLsqBghyTwEI9aj5EQkzdpRDLlKQe7TtVbxfIbZpj4a/JH
 gwvNsyfRbEBfQ46bhA4XNgkACVjAEHevCzJlbjfCQ/a2KS45Hr9D2PhieQ8uDRsP
 J19dGdwuUjsVmh1esWY/7jrm5SUj4dpmrbcyQBTO2G9PJuxmuwr++LOkuBprjSQe
 PFjWQ6JsL+jjVQGXNS6OWDkHPhwOOlvYYGEdOI5nqFRRcffiaFdXiowOmC8OoOxf
 QTNVXHGuMQGT+bL09b79OXptDuixKoroXQcvkLe4w/hJypHVRUfB/6UMn+6mlkF8
 rx2Wr62ZmrVHYLVAJFNm20+hYmCOuYeOMvhXtbwBThynWsR14nsCypE/mxmRObIf
 QBlVvi8gsRnqjM8j1BTRNCEi5U5dIOy15Mca5YgUSLgtzow7TD2z4e8+MUBKEm1k
 68JCS20eZ4iYG+LQsCX44Lcvj35tJxcQYmQ40wm4rTgGDM7hD5w0WunTuYdoHWHw
 /U17mAATlz/xDqHyGYKH
 =V2AG
 -----END PGP SIGNATURE-----

Merge tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

SCPI updates and fixes for v4.8

1. Adds support for device power state management using generic power
   domains and runtime PM

2. Other minor/miscellaneous fixes to the driver

* tag 'scpi-updates-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: scpi: add device power domain support using genpd
  Documentation: add DT bindings for ARM SCPI power domains
  firmware: arm_scpi: add support for device power state management
  firmware: arm_scpi: make it depend on MAILBOX instead of ARM_MHU
  firmware: arm_scpi: mark scpi_get_sensor_value as static
  firmware: arm_scpi: remove dvfs_get packed structure

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-04 21:32:07 -07:00
Olof Johansson
64f618a7a1 ARM: Keystone DTS update for 4.8
- Pinmux entries for K2G
 	- PCI DTS entry fixup
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXaW1xAAoJEHJsHOdBp5c/kk8P/RRJZZVoqgxQkun/Un9uCo8k
 w72o0YNnm/iae/2V2TvBIq+w9u7hvyemAIo4oHgf4RhQDhHLtRW48DefqoZbCxdB
 5YokyM6msFaaQGOuGd0206PDQLyWjzcgrhTFap4yKG1qVaZ+AriERJGsfG73AXUa
 jiUPy3fCDfGdprxjzBMKRyq7LtWBKtUpBaLfc8ZeWwP8Ik5fbPFqe3iwJPcvW2SD
 cc5kWKUWO6lqvrx11mdEWhy+5u0wUcEDWyYI9mSse9uLMFAJ6ztYrMiDBcp6/lhk
 EgNIKO7+BFjRd/3cRfSxKazAc2Zgq+y0Y6HCUALapoWr+SPvlvzBrMp+pemgXHge
 QQbZcdb9GS6vcVMQ1cXJfUx1KqVpGlAR3G66QJMmZ/p3pJebD4dvGpcbBkH5ZFsG
 Qi61N9UDjgoxbkk83bCDRjr9KjVBhajPpq4KG0Vu3GvlMaFPAGpm29t7juphbZai
 fq4tuMT9fEUNxQE4kRNOX2iAp4ns5E2QNwWxOoMzpW39Znsc2iFNTH818cQfx+Fh
 oXSXtlEINgHqD6hRaBGrq2nkFB1ly2FGQJK1n58frTadP+9vVbggVMjT780B8FWV
 6yl0c2w1RZcZhmMNhKVbFpqbPWiGCdwChR0RBNrR4uVBknFMOnshQxJnWihcYUk6
 ZPZKqt/WzI4noVCqUKkQ
 =L7oP
 -----END PGP SIGNATURE-----

Merge tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

ARM: Keystone DTS update for 4.8

	- Pinmux entries for K2G
	- PCI DTS entry fixup

* tag 'keystone_dts_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: k2g-evm: Add pinmuxing for UART0
  ARM: dts: keystone: Header file for pinctrl constants
  ARM: dts: k2g: Add pinctrl support
  ARM: dts: keystone-k2l: Add pinctrl node
  ARM: dts: keystone: add interrupt property to PCI controller bindings
  ARM: dts: keystone: remove bogus IO resource entry from PCI binding

Signed-off-by: Olof Johansson <olof@lixom.net>
2016-07-04 20:46:16 -07:00
Jiri Pirko
7ce856aaaf mlxsw: spectrum: Add couple of lower device helper functions
Add functions that iterate over lower devices and find port device.
As a dependency add netdev_for_each_all_lower_dev and
netdev_for_each_all_lower_dev_rcu macro with
netdev_all_lower_get_next and netdev_all_lower_get_next_rcu shelpers.

Also, add functions to return mlxsw struct according to lower device
found and mlxsw_port struct with a reference to lower device.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 18:25:15 -07:00
Yakir Yang
7bdc072086 drm/bridge: analogix_dp: some rockchip chips need to flip REF_CLK bit setting
As vendor document indicate, when REF_CLK bit set 0, then DP
phy's REF_CLK should switch to 24M source clock.

But due to IC PHY layout mistaken, some chips need to flip this
bit(like RK3288), and unfortunately they didn't indicate in the
DP version register. That's why we have to make this little hack.

Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Tomasz Figa <tomasz.figa@chromium.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
2016-07-05 09:16:40 +08:00
Dave Airlie
5dd0775e50 ASoC: Add private data for HDMI CODEC callbacks
Allow the HDMI CODECs to get private data passed in in callbacks.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXd3kSAAoJECTWi3JdVIfQuVcH/A3UN9SCUMjPfRvpSOr5fEV7
 MRn4AHxnP0DWucN041rdTvuxJVpIcLpkj15qfJLFOYLtN0ub2YVNlic2a3pFoRtx
 ajbDC//5TFvrWjEEkMAPgdALymVYwCOKLuUgSI6xBKe+RW58JIYLzz+T+NUKHor4
 3tEBNSvEQL7ljZWwr9657EO/KX9PIO7juWYk2wFHyLN7YBZEz8PZDI9y37bjnpce
 PjK7X5uWXss/DRwcSvKZX6MVmErn6egxzhlFon3YpSWEzqalGsEUsJxW7Jhwk8G5
 XA4EntLWAQnwW2R4Jf/5+TI1DTHXsne0iRNZbVyDf//LX5GIPJp6Ck5AYI0QVTw=
 =JcYF
 -----END PGP SIGNATURE-----

Merge tag 'asoc-hdmi-codec-pdata' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into drm-next

ASoC: Add private data for HDMI CODEC callbacks

Allow the HDMI CODECs to get private data passed in in callbacks.

[airlied:
Add STI/mediatek patches from Arnd for drivers merged later in drm tree.]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

* tag 'asoc-hdmi-codec-pdata' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: hdmi-codec: callback function will be called with private data
2016-07-05 09:57:23 +10:00
Daniel Borkmann
13c5c240f7 bpf: add bpf_get_hash_recalc helper
If skb_clear_hash() was invoked due to mangling of relevant headers and
BPF program needs skb->hash later on, we can add a helper to trigger hash
recalculation via bpf_get_hash_recalc().

The helper will return the newly retrieved hash directly, but later access
can also be done via skb context again through skb->hash directly (inline)
without needing to call the helper once more.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 16:08:40 -07:00
Jamal Hadi Salim
ff202ee1ed net sched actions: skbedit add support for mod-ing skb pkt_type
Extremely useful for setting packet type to host so i dont
have to modify the dst mac address using pedit (which requires
that i know the mac address)

Example usage:
tc filter add dev eth0 parent ffff: protocol ip pref 9 u32 \
match ip src 5.5.5.5/32 \
flowid 1:5 action skbedit ptype host

This will tag all packets incoming from 5.5.5.5 with type
PACKET_HOST

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 15:11:14 -07:00
Jamal Hadi Salim
8b10cab64c net: simplify and make pkt_type_ok() available for other users
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04 15:11:13 -07:00
Greg Kroah-Hartman
c318a821b9 Merge 4.7-rc6 into usb-next
We want the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-04 08:19:21 -07:00
Greg Kroah-Hartman
67417f9c26 Merge 4.7-rc6 into tty-next
We want the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-04 08:17:08 -07:00
Greg Kroah-Hartman
7813029a50 Merge 4.7-rc6 into staging-next
We want the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-04 08:15:03 -07:00
David Lechner
300eb0139c phy: Add set_mode callback
The initial use for this is for PHYs that have a mode related to USB OTG.
There are several SoCs (e.g. TI OMAP and DA8xx) that have a mode setting
in the USB PHY to override OTG VBUS and ID signals.

Of course, the enum can be expaned in the future to include modes for
other types of PHYs as well.

Suggested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
2016-07-04 17:19:22 +05:30
Rafael J. Wysocki
5d1191ab6c Merge back earlier cpufreq material for v4.8. 2016-07-04 13:21:43 +02:00
Antonio Quartulli
33a3bb4a33 batman-adv: throughput meter implementation
The throughput meter module is a simple, kernel-space replacement for
throughtput measurements tool like iperf and netperf. It is intended to
approximate TCP behaviour.

It is invoked through batctl: the protocol is connection oriented, with
cumulative acknowledgment and a dynamic-size sliding window.

The test *can* be interrupted by batctl. A receiver side timeout avoids
unlimited waitings for sender packets: after one second of inactivity, the
receiver abort the ongoing test.

Based on a prototype from Edo Monticelli <montik@autistici.org>

Signed-off-by: Antonio Quartulli <antonio.quartulli@open-mesh.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04 12:37:18 +02:00
Matthias Schiffer
5da0aef5e9 batman-adv: add netlink command to query generic mesh information files
BATADV_CMD_GET_MESH_INFO is used to query basic information about a
batman-adv softif (name, index and MAC address for both the softif and
the primary hardif; routing algorithm; batman-adv version).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Reduce the number of changes to
BATADV_CMD_GET_MESH_INFO, add missing kerneldoc, add policy for attributes]
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04 12:37:17 +02:00
Matthias Schiffer
09748a22f4 batman-adv: add generic netlink family for batman-adv
debugfs is currently severely broken virtually everywhere in the kernel
where files are dynamically added and removed (see
http://lkml.iu.edu/hypermail/linux/kernel/1506.1/02196.html for some
details). In addition to that, debugfs is not namespace-aware.

Instead of adding new debugfs entries, the whole infrastructure should be
moved to netlink. This will fix the long standing problem of large buffers
for debug tables and hard to parse text files.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
[sven.eckelmann@open-mesh.com: Strip down patch to only add genl family,
add missing kerneldoc]
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-04 12:37:17 +02:00
Thierry Escande
7854a44526 NFC: digital: Add a delay between poll cycles
This replaces the polling work struct with a delayed work struct and add
a 10 ms delay between 2 poll cycles. This avoids to flood the device
with 'switch off'/'switch on' commands.

Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04 12:26:27 +02:00
Thomas Gleixner
8658be133b Merge branch 'irq/for-block' into irq/core
Pull the irq affinity managing code which is in a seperate branch for block
developers to pull.
2016-07-04 12:26:05 +02:00
Christoph Hellwig
5e385a6ef3 genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
This is lifted from the blk-mq code and adopted to use the affinity mask
concept just introduced in the irq handling code.  It tries to keep the
algorithm the same as the one current used by blk-mq, but improvements
like assining vectors on a per-node basis instead of just per sibling
are possible with this simple move and refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-7-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 12:25:14 +02:00
Thomas Gleixner
0972fa57f5 genirq/msi: Make use of affinity aware allocations
Allow the MSI code to provide affinity hints per MSI descriptor.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-6-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 12:25:14 +02:00
Thomas Gleixner
06ee6d571f genirq: Add affinity hint to irq allocation
Add an extra argument to the irq(domain) allocation functions, so we can hand
down affinity hints to the allocator. Thats necessary to implement proper
support for multiqueue devices.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-4-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 12:25:13 +02:00
Thomas Gleixner
9c2555835b genirq: Introduce IRQD_AFFINITY_MANAGED flag
Interupts marked with this flag are excluded from user space interrupt
affinity changes. Contrary to the IRQ_NO_BALANCING flag, the kernel internal
affinity mechanism is not blocked.

This flag will be used for multi-queue device interrupts.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-3-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 12:25:13 +02:00
Thomas Gleixner
b6140914fd genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
No user and we definitely don't want to grow one.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-block@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: axboe@fb.com
Cc: agordeev@redhat.com
Link: http://lkml.kernel.org/r/1467621574-8277-2-git-send-email-hch@lst.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-07-04 12:25:12 +02:00
Denys Vlasenko
f86dec94e3 NFC: hci: delete unused nfc_llc_get_rx_head_tail_room()
It used to be EXPORTed, but then EXPORT usage was cleaned up
(in 2012), without noticing that the function has no users at all
(and curiously, never had any users).

Delete it.

While at it, remove non-static "inline" hints on nearby functions:
these hints don't work across compilation units anyway,
and these functions are not used in their .c file, thus they are
never inlined. IOW: "inline" here does not help in any way.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: Samuel Ortiz <sameo@linux.intel.com>
CC: Christophe Ricard <christophe.ricard@gmail.com>
CC: linux-wireless@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-04 12:14:05 +02:00
Chris Wilson
bc3d674462 drm/i915: Allow userspace to request no-error-capture upon GPU hangs
igt likes to inject GPU hangs into its command streams. However, as we
expect these hangs, we don't actually want them recorded in the dmesg
output or stored in the i915_error_state (usually). To accommodate this
allow userspace to set a flag on the context that any hang emanating
from that context will not be recorded. We still do the error capture
(otherwise how do we find the guilty context and know its intent?) as
part of the reason for random GPU hang injection is to exercise the race
conditions between the error capture and normal execution.

v2: Split out the request->ringbuf error capture changes.
v3: Move the flag defines next to the intel_context->flags definition

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1467616119-4093-9-git-send-email-chris@chris-wilson.co.uk
2016-07-04 08:18:24 +01:00
Marc Zyngier
50926d82fa KVM: arm/arm64: The GIC is dead, long live the GIC
I don't think any single piece of the KVM/ARM code ever generated
as much hatred as the GIC emulation.

It was written by someone who had zero experience in modeling
hardware (me), was riddled with design flaws, should have been
scrapped and rewritten from scratch long before having a remote
chance of reaching mainline, and yet we supported it for a good
three years. No need to mention the names of those who suffered,
the git log is singing their praises.

Thankfully, we now have a much more maintainable implementation,
and we can safely put the grumpy old GIC to rest.

Fellow hackers, please raise your glass in memory of the GIC:

	The GIC is dead, long live the GIC!

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-07-03 23:09:37 +02:00
Linus Torvalds
0b295dd5b8 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
 "This makes sure userspace filesystems are not broken by the parallel
  lookups and readdir feature"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: serialize dirops by default
2016-07-03 12:02:00 -07:00
Joe Perches
c37a2dfa67 netfilter: Convert FWINV<[foo]> macros and uses to NF_INVF
netfilter uses multiple FWINV #defines with identical form that hide a
specific structure variable and dereference it with a invflags member.

$ git grep "#define FWINV"
include/linux/netfilter_bridge/ebtables.h:#define FWINV(bool,invflg) ((bool) ^ !!(info->invflags & invflg))
net/bridge/netfilter/ebtables.c:#define FWINV2(bool, invflg) ((bool) ^ !!(e->invflags & invflg))
net/ipv4/netfilter/arp_tables.c:#define FWINV(bool, invflg) ((bool) ^ !!(arpinfo->invflags & (invflg)))
net/ipv4/netfilter/ip_tables.c:#define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
net/ipv6/netfilter/ip6_tables.c:#define FWINV(bool, invflg) ((bool) ^ !!(ip6info->invflags & (invflg)))
net/netfilter/xt_tcpudp.c:#define FWINVTCP(bool, invflg) ((bool) ^ !!(tcpinfo->invflags & (invflg)))

Consolidate these macros into a single NF_INVF macro.

Miscellanea:

o Neaten the alignment around these uses
o A few lines are > 80 columns for intelligibility

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-07-03 10:55:07 +02:00