Move and fixup all sysfs related bits to sysfs.c file.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Clean out dma_v2 and remove ioat2 calls since we are moving everything
to just ioat.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Changing the variable names for ioatdma_device to be consistently named
ioat_dma instead of device/dma in order to avoid confusion and distinct
from struct device. This will clearly indicate that it is an
ioatdma_device. This also make all the naming consistent that the dma
device is ioat_dma and all the channels are ioat_chan.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Kill the common ioatdma channel structure and everything that is not
dma_chan to be ioat_dma_chan. Since we don't have to worry about v1
and v2 ioatdma anymore this makes it much cleaner and obvious for
maintenance.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Removal of support for ioatdma v2 device support.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cleaning up of ioat1 specific code as it is no longer supported
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Removal of any devices that are ioatdma pre-3.0. This is the first step
in attempting to clean up the ioatdma driver and remove hw no longer
supported.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
If the allocation order is 16, then the u16 count will overflow and wrap
to zero when assigned the value 1 << 16.
Change the type of 'total_descs' to int, so that it is large enough to
store a value equal or greater than 1 << 16.
Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
If the allocation order is 16, then the u16 index will overflow and wrap
to zero instead of being equal or greater than 1 << 16. The loop
condition will always be true, and the loop will run until all the
memory resources are depleted.
Change the type of index 'i' to u32, so that it is large enough to store
a value equal or greater than 1 << 16.
Signed-off-by: Allen Hubbe <Allen.Hubbe@emc.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Everytime we use the logical context with execlists it becomes dirty (as
the hardware will write the new register values afterwards, as well as
the GPU state that will be used). We need to then flag the context as
dirty everytime since after a swap-out/swap-in cycle the dirty flag will
be cleared, and a further swap-out cycle will then loose the most recent
GPU state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Several cap11xx variants have LEDs that be can be controlled; let's plug
the driver into the LED subsystem.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A couple of fixes from the previous pull request as well as gl3 support.
There is one drm core change, an export of a previously private function.
Take 2 implementing screen targets, this time with the fbdev code adjusted
accordingly.
Also there is an implementation of register-driven command buffers, that
overrides the FIFO ring for command processing. It's needed for our upcoming
hardware revision.
* 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux: (35 commits)
drm/vmwgfx: Fix copyright headers
drm/vmwgfx: Add DX query support. Various fixes.
drm/vmwgfx: Add command parser support for a couple of DX commands
drm/vmwgfx: Command parser fixes for DX
drm/vmwgfx: Initial DX support
drm/vmwgfx: Update device includes for DX device functionality
drm: export the DRM permission check code
drm/vmwgfx: Fix crash when unloading vmwgfx v2
drm/vmwgfx: Fix framebuffer creation on older hardware
drm/vmwgfx: Fixed topology boundary checking for Screen Targets
drm/vmwgfx: Fix an uninitialized value
drm/vmwgfx: Fix compiler warning with 32-bit dma_addr_t
drm/vmwgfx: Kill a bunch of sparse warnings
drm/vmwgfx: Fix kms preferred mode sorting
drm/vmwgfx: Reinstate the legacy display system dirty callback
drm/vmwgfx: Implement fbdev on kms v2
drm/vmwgfx: Add a kernel interface to create a framebuffer v2
drm/vmwgfx: Avoid cmdbuf alloc sleeping if !TASK_RUNNING
drm/vmwgfx: Convert screen targets to new helpers v3
drm/vmwgfx: Convert screen objects to the new helpers
...
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Dee7
-----END PGP SIGNATURE-----
Merge tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/panel: Changes for v4.3-rc1
This introduces support for a couple of new panels and also contains
some work to restructure the directories to get more consistency, to
deal better with more panel and bridge drivers getting added.
* tag 'drm/panel/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux:
drm/bridge: Put Kconfig entries in a separate menu
drm/panel: Add support for LG LG4573 480x800 4.3" panel
drm/panel: Add display timing for Okaya RS800480T-7X0GP
of: Add Okaya Electric America vendor prefix
drm/panel: simple: Add support for NEC NL4827HC19-05B 480x272 panel
drm/panel: simple: Add support for AUO B080UAN01
drm/panel: simple: Correct minimum hsync length of the HannStar HSD070PWW1 panel
drm/panel: simple: Add bus format for HannStar HSD070PWW1 LVDS panel
drm/bridge: Add vendor prefixes
drm/panel: Add Samsung prefix to panel drivers
drm/exynos: Remove PTN3460 dependency
There are a bunch of non-critical fixes here that I've collected over
the past few months, but the biggest part is Tegra210 support, in the
DC, DSI and SOR/HDMI drivers.
Also this finally restores DPMS with atomic mode-setting, something
that has been broken since the conversion and which I had originally
expected to take far less longer to fix.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=lxYn
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.3-rc1
There are a bunch of non-critical fixes here that I've collected over
the past few months, but the biggest part is Tegra210 support, in the
DC, DSI and SOR/HDMI drivers.
Also this finally restores DPMS with atomic mode-setting, something
that has been broken since the conversion and which I had originally
expected to take far less longer to fix.
* tag 'drm/tegra/for-4.3-rc1' of git://anongit.freedesktop.org/tegra/linux: (41 commits)
drm/tegra: sor: Add HDMI support
drm/tegra: sor: Add Tegra210 eDP support
drm/tegra: dc: Implement atomic DPMS
drm/tegra: sor: Restore DPMS
drm/tegra: dsi: Restore DPMS
drm/tegra: hdmi: Restore DPMS
drm/tegra: rgb: Restore DPMS
drm/tegra: sor: Use DRM debugfs infrastructure for CRC
drm/tegra: sor: Write correct head state registers
drm/tegra: sor: Constify display mode
drm/tegra: sor: Reset the correct debugfs fields
drm/tegra: sor: Set minor after debugfs initialization
drm/tegra: sor: Provide error messages in probe
drm/tegra: sor: Rename registers for consistency
drm/tegra: dpaux: Disable interrupt when detached
drm/tegra: dpaux: Configure pads as I2C by default
drm/tegra: dpaux: Provide error message in probe
drm/tegra: dsi: Add Tegra210 support
drm/tegra: dsi: Add Tegra132 support
drm/tegra: dsi: Add Tegra124 support
...
Summary:
- Clean up HDMI and MIXER parts
- Clean up legacy structures specific to Exynos DRM
. This patch series removes existing exyons_drm_display and
exynos_drm_encoder structures specific to Exynos DRM, and
makes them to replace with common drm_encoder structure.
With cleanup patch, we removes exynos_drm_encoder module.
- Clean up gem, dmabuf and buffer modules
. This patch series replaces existing Exynos DRM dmabuf codes
with common drm prime ones, and embeds all codes of exynos_drm_buf
into exynos_drm_gem module.
With cleanup patch, we removes exynos_drm_buf and exynos_drm_dmabuf
modules.
- And some fixups.
* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (53 commits)
drm/exynos: merge exynos_drm_buf.c to exynos_drm_gem.c
drm/exynos: use prime helpers
drm/exynos: remove function roundup_gem_size
drm/exynos: remove function update_vm_cache_attr
drm/exynos: remove function check_gem_flags
drm/exynos: use ERR_PTR instead of NULL in exynos_drm_gem_init
drm/exynos: remove unused fields of struct exynos_drm_gem_buf
drm/exynos: stop copying sg table
drm/exynos: remove function exynos_drm_gem_map_buf
drm/exynos: remove mutex locking in pagefault handler
drm/exynos: remove function convert_to_vm_err_msg
drm/exynos: stop using sgtable in page fault handler
drm/exynos: remove struct exynos_drm_encoder layer
drm/exynos: fold encoder setup into exynos_drm_load()
drm/exynos: remove exynos_drm_create_enc_conn()
drm/exynos: remove exynos_encoder's .commit() op
drm/exynos: remove extra call to exynos_dp_commit()
drm/exynos: remove extra call to hdmi_commit()
drm/exynos: remove struct exynos_drm_display
drm/exynos: simplify calculation of possible CRTCs
...
1) includes all the drm/msm side of things for upstream kernel working
on dragonboard 410c (still some pending work on adv7533 bridge chip)
2) initial support for msm8x94 (snapdragon 810)
3) support for msm8x74v1 (in addition to existing v2 support)
4) support for dma planes on mdp5 (additional planes that cannot scale/csc)
5) more yuv format support for mdp5 (single plane vyuy/uyvy/yuyv/yvyu,
two plane nv16/nv61, and three plane yuv420/yvu420)
6) rotation support for mdp5
7) initial hdcp support
8) fixes, etc
* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (46 commits)
drm/msm/dsi: Introduce DSI configuration module
drm/msm/dsi: Make each PHY type compilation independent
drm/msm/dsi: Split PHY drivers to separate files
drm/msm/dsi: Return void from msm_dsi_phy_disable()
drm/msm/dsi: Specify bitmask to set source PLL
drm/msm/mdp: Clear pending interrupt status before enable interrupt
drm/msm/mdp5: Add rotation (hflip/vflip) support to MDP5 planes (v2)
drm/msm: add calls to prepare and unprepare panel
drm/msm/dsi: Modify dsi manager bridge ops to work with external bridges
drm/msm/dsi: Allow dsi to connect to an external bridge
drm/msm/dsi: Create a helper to check if there is a connected device
drm/msm/dsi: Refer to connected device as 'device' instead of 'panel'
drm/msm/dsi: Make TE gpio optional
drm/msm: mdp4 lvds: get panel node via of graph parsing
drm/msm: dsi host: Use device graph parsing to parse connected panel
drm/msm: dsi host: add missing of_node_put()
drm/msm: Enable clocks during enable/disable_vblank() callbacks
drm/msm/mdp5: Add support for msm8x74v1
drm/msm/mdp5: Add DMA pipe planes for MDP5
drm/msm/mdp: Add capabilities to MDP planes (v2)
...
Bunch more fixes for 4.3, most of it skl fallout. It's not quite all yet,
there's still a few more patches pending to enable DDI-E correctly on skl.
Also included the dpms atomic work from Maarten since atomic is just a
pain and not including would cause piles of conflicts right from the
start.
* tag 'drm-intel-next-fixes-2015-08-16' of git://anongit.freedesktop.org/drm-intel: (67 commits)
drm/i915: Per-DDI I_boost override
drm/i915/skl: WaIgnoreDDIAStrap is forever, always init DDI A
drm/i915: fix checksum write for automated test reply
drm/i915: Contain the WA_REG macro
drm/i915: Remove the failed context from the fpriv->context_idr
drm/i915: Report IOMMU enabled status for GPU hangs
drm/i915: Check idle to active before processing CSQ
drm/i915: Set alternate aux for DDI-E
drm/i915: Set power domain for DDI-E
drm/i915: fix stolen bios_reserved checks
drm/i915: Use masked write for Context Status Buffer Pointer
drm/i915/skl WaDisableSbeCacheDispatchPortSharing
drm/i915: Spam less on dp aux send/receive problems
drm/i915: Handle return value in intel_pin_and_fence_fb_obj, v2.
drm/i915: Only update mode related state if a modeset happened.
drm/i915: Remove connectors_active.
drm/i915: Remove connectors_active from intel_dp.c, v2.
drm/i915: Remove connectors_active from sanitization, v2.
drm/i915: Get rid of dpms handling.
drm/i915: Make crtc checking use the atomic state, v2.
...
This patch plugs the leak of irq_bitmap, allocated as part of
initialization of cxl_context struct; during the call to
afu_allocate_irqs. The bitmap is now release during the call to function
afu_release_irqs.
Reported-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
CONFIG_CXL_EEH is for CXL's EEH related code.
Other drivers can depend on or #ifdef on this symbol to configure
PERST behaviour, allowing CXL to participate in the EEH process.
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
spi phy needs to use ndlc_recv at every spi transaction causing
"unknown packet control byte" error message each time the header
is 00. Make this silent.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
A smallish batch of fixes, a little more than expected this late, but
all fixes are contained to their platforms and seem reasonably low risk:
- A somewhat large SMP fix for ux500 that still seemed warranted to include here
- OMAP DT fixes for pbias regulator specification that broke due to some DT
reshuffling
- PCIe IRQ routing bugfix for i.MX
- Networking fixes for keystone
- Runtime PM for OMAP GPMC
- A couple of error path bug fixes for exynos
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Auuc
-----END PGP SIGNATURE-----
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smallish batch of fixes, a little more than expected this late, but
all fixes are contained to their platforms and seem reasonably low
risk:
- a somewhat large SMP fix for ux500 that still seemed warranted to
include here
- OMAP DT fixes for pbias regulator specification that broke due to
some DT reshuffling
- PCIe IRQ routing bugfix for i.MX
- networking fixes for keystone
- runtime PM for OMAP GPMC
- a couple of error path bug fixes for exynos"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: keystone: Fix the mdio bindings by moving it to soc specific file
ARM: dts: keystone: fix the clock node for mdio
memory: omap-gpmc: Don't try to save uninitialized GPMC context
ARM: imx6: correct i.MX6 PCIe interrupt routing
ARM: ux500: add an SMP enablement type and move cpu nodes
ARM: dts: dra7: Fix broken pbias device creation
ARM: dts: OMAP5: Fix broken pbias device creation
ARM: dts: OMAP4: Fix broken pbias device creation
ARM: dts: omap243x: Fix broken pbias device creation
ARM: EXYNOS: fix double of_node_put() on error path
ARM: EXYNOS: Fix potentian kfree() of ro memory
st21nfcb does support another phy than i2c: spi.
st21nfcc does not support spi as the spi ios are used
by the AMS RF booster.
st21nfcb is not following NCI NFC Forum recommendations for spi
but rely on ST prioritary protocol ndlc as for i2c.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
PCB_SYNC different than PCB_TYPE_SUPERVISOR or PCB_TYPE_DATAFRAME
should be discarded.
Irrelevant data may be forwarded up to the ndlc state machine by
phys like spi to prevent missing potential data during "write"
transactions.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
When receiving a NDLC PCB_SYNC_ACK the pending data was never
removed from ack_pending_q and cleared.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
st_nci_hci_load_session() calls kfree_skb() on unitialized
variables skb_pipe_info and skb_pipe_list if the call to
nci_hci_connect_gate() failed. Reword the error path to not use
these variables when they are not initialized. While at it, there
seemed to be a memory leak because skb_pipe_info was only freed
once, after the for-loop, even though several ones were created
by nci_hci_send_cmd.
Cc: stable@vger.kernel.org
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
st21nfca_hci_load_session() calls kfree_skb() on unitialized
variables skb_pipe_info and skb_pipe_list if the call to
nfc_hci_connect_gate() failed. Reword the error path to not use
these variables when they are not initialized. While at it, there
seemed to be a memory leak because skb_pipe_info was only freed
once, after the for-loop, even though several ones were created
by nfc_hci_send_cmd.
Fixes: ec03ff1a8f
("NFC: st21nfca: Remove skb_pipe_list and skb_pipe_info
useless allocation")
Cc: stable@vger.kernel.org
Acked-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Due to a copy and paste error st_nci_i2c_read still contains
st21nfca header comment.
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Replace ST21NFCB with ST_NCI or st21nfcb with st_nci as it
was forgotten in commit "nfc: st-nci: Rename st21nfcb to st-nci"
ed06aeefda
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Shut up this compiler warning that I get during the daily build:
horus3a.c: In function 'horus3a_set_params':
horus3a.c:308:24: warning: 'rolloff' may be used uninitialized in this function [-Wmaybe-uninitialized]
symbol_rate * (100 + rolloff), 200000) + 5;
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.
Monotonic time is constantly increasing time better suited for comparing two
timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Wall time obtained from do_gettimeofday is susceptible to sudden jumps due to
user setting the time or due to NTP.
Monotonic time is constantly increasing time better suited for comparing two
timestamps.
Signed-off-by: Abhilash Jindal <klock.android@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Header claims GPL v2, so make the MODULE_LICENSE reflect that properly.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
In videobuf_setup reject buffers that are too small for the configured
format. Fixes v4l2-compliance issue.
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Reviewed-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Adapt rcar_vin_querycap() so that cap->bus_info is populated with
something meaningful/unique.
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This adds V4L2_MBUS_FMT_RGB888_1X24 input format support
which is used by the ADV7612 chip.
Modified to use MEDIA_BUS_FMT_* constants
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: William Towle <william.towle@codethink.co.uk>
Reviewed-by: Rob Taylor <rob.taylor@codethink.co.uk>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commits moves the Intersil/Techwell PCI vendor ID, and
the device IDs for the TW68 PCI video capture cards.
This will allow to support future Intersil/Techwell devices
without duplicating the IDs.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
On the place of the source entity name, the sink entity name was printed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Platforms using the OMAP3 ISP have all switched to DT, drop platform
data support.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Convert g2d_userptr_get_dma_addr() to pin pages using get_vaddr_frames().
This removes the knowledge about vmas and mmap_sem locking from exynos
driver. Also it fixes a problem that the function has been mapping user
provided address without holding mmap_sem.
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Conversion to the use of pinned pfns made some functions unused. Remove
them. Also there's no need to lock mmap_sem in __buf_prepare() anymore.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Convert vb2_dc_get_userptr() to use frame vector infrastructure. When we
are doing that there's no need to allocate page array and some code can
be simplified.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Convert vb2_vmalloc_get_userptr() to use frame vector infrastructure.
When we are doing that there's no need to allocate page array and some
code can be simplified.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Provide simple helper functions to map virtual address range into an
array of pfns / pages.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Convert omap_vout_uservirt_to_phys() to use get_vaddr_pfns() instead of
hand made mapping of virtual address to physical address. Also the
function leaked page reference from get_user_pages() so fix that by
properly release the reference when omap_vout_buffer_release() is
called.
Signed-off-by: Jan Kara <jack@suse.cz>
[hans.verkuil@cisco.com: remove unused variable]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Currently vb2 core acquires mmap_sem just around call to
__qbuf_userptr(). However since commit f035eb4e97 (videobuf2: fix
lockdep warning) it isn't necessary to acquire it so early as we no
longer have to drop queue mutex before acquiring mmap_sem. So push
acquisition of mmap_sem down into .get_userptr memop so that the
semaphore is acquired for a shorter time and it is clearer what it is
needed for.
Note that we also need mmap_sem in .put_userptr memop since that ends up
calling vb2_put_vma() which calls vma->vm_ops->close() which should be
called with mmap_sem held. However we didn't hold mmap_sem in some code
paths anyway (e.g. when called via vb2_ioctl_reqbufs() ->
__vb2_queue_free() -> vb2_dma_sg_put_userptr()) and getting mmap_sem in
put_userptr() introduces a lock inversion with queue->mmap_lock in the
above mentioned call path.
Luckily this whole locking mess will get resolved once we convert
videobuf2 core to the new mm helper which avoids the need for mmap_sem
in .put_userptr memop altogether.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
sr030pc30_get_fmt() can only succeed if both info->curr_win and
info->curr_fmt are not NULL.
If one of those vars are null, the curent code would call:
ret = sr030pc30_set_params(sd);
If the curr_win is null, it will return -EINVAL, as it would be
expected. However, if curr_fmt is NULL, the function won't
set it.
The code will then try to read from it:
mf->code = info->curr_fmt->code;
mf->colorspace = info->curr_fmt->colorspace;
with obviouly won't work.
This got reported by smatch:
drivers/media/i2c/sr030pc30.c:505 sr030pc30_get_fmt() error: we previously assumed 'info->curr_win' could be null (see line 499)
drivers/media/i2c/sr030pc30.c:507 sr030pc30_get_fmt() error: we previously assumed 'info->curr_fmt' could be null (see line 499)
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Why to store the chosed values for prediv, postdiv and mult if
those won't be used?
drivers/media/i2c/ov2659.c: In function 'ov2659_pll_calc_params':
drivers/media/i2c/ov2659.c:912:35: warning: variable 's_mult' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
drivers/media/i2c/ov2659.c:912:20: warning: variable 's_postdiv' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
drivers/media/i2c/ov2659.c:912:6: warning: variable 's_prediv' set but not used [-Wunused-but-set-variable]
u32 s_prediv = 1, s_postdiv = 1, s_mult = 1;
^
This is likely some leftover from some past change.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>