Commit graph

287,481 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
1297651655 [media] ov9650: remove an extra space
drivers/media/i2c/ov9650.c:1439 ov965x_detect_sensor() warn: inconsistent indenting

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16 12:55:28 -03:00
Mauro Carvalho Chehab
1d88f831d2 [media] tc358743: don't use variable length array for I2C writes
drivers/media/i2c/tc358743.c:148:19: warning: Variable length array is used.

As the maximum size is 1026, we can't use dynamic var, as it
would otherwise spend 1056 bytes of the stack at i2c_wr() function.

So, allocate a buffer with the allowed maximum size together with
the state var.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-16 12:55:07 -03:00
Philipp Zabel
5d44595c26 Merge branch 'reset/ath79' into reset/next 2015-08-16 17:11:20 +02:00
Cristina Opriceana
a6d748e3ad Staging: iio: trigger: Use braces on both branches of if statement
Fix style issue related to missing braces, detected by checkpatch.pl.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:28 +01:00
Cristina Opriceana
8463f6fb78 Staging: iio: trigger: Alignment should match open parenthesis
Fix alignment for function parameters as suggested by checkpatch.pl.

Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:28 +01:00
Xander Huff
70581e0ef8 iio: adc: xilinx-xadc: Push interrupts into hardirq context
The driver currently registers a pair of irq handlers using
request_threaded_irq(), however the synchronization mechanism between the
hardirq and the threadedirq handler is a regular spinlock.

Unfortunately, this breaks PREEMPT_RT builds, where a spinlock can sleep,
and is thus not able to be acquired from a hardirq handler. This patch gets
rid of the threaded handler and pushes all interrupt handling into the
hardirq context, and uses request_irq().

To validate that this change has no impact on RT performance, here are
cyclictest values with no processes running:

$ sudo cyclictest -S -m -p 98
policy: fifo: loadavg: 0.00 0.01 0.05 1/174 2539
T: 0 ( 1405) P:98 I:1000 C:167010520 Min: 9 Act: 12 Avg: 12 Max: 75
T: 1 ( 1862) P:98 I:1500 C:111340339 Min: 9 Act: 12 Avg: 12 Max: 73

Then, all xadc raw handles were accessed in a continuous loop via
/sys/bus/iio/devices/iio:device0:

$ sudo cyclictest -S -m -p 98
policy: fifo: loadavg: 7.84 7.70 7.63 3/182 4260
T: 0 ( 2559) P:98 I:1000 C:241557018 Min: 11 Act: 18 Avg: 21 Max: 74
T: 1 ( 2560) P:98 I:1500 C:161038006 Min: 10 Act: 21 Avg: 20 Max: 73

Signed-off-by: Xander Huff <xander.huff@ni.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:27 +01:00
Yong Li
70b2737e0a staging: iio: hmc5843: Set iio name dynamically
Load the driver using the below command:
echo hmc5983 0x1e > /sys/bus/i2c/devices/i2c-?/new_device

In sysfs, the iio name is hmc5843, however the i2c name is hmc5983,
they are inconsistent.

With this patch, the iio name will be the same as the i2c device name

Signed-off-by: Yong Li <sdliyong@gmail.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:27 +01:00
Linus Walleij
3f9059b717 iio: percolate error if event fd fails
This makes the error from iio_event_getfd() percolate up
to userspace properly so we can know for sure there is no
events on this device (-ENODEV returned). Before this patch
we would bail out looking for the unsupported events on the
erroneous (negative) file descriptor.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:26 +01:00
Linus Walleij
a0175b9c76 iio: st_sensors: add debugfs register read hook
This adds a debugfs hook to read/write registers in the ST
sensors using debugfs. Proved to be awesome help when trying
to debug why IRQs do not arrive.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:25 +01:00
Markus Pargmann
5d889abbe5 iio: bmg160: Remove remaining uses of i2c_client
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:23 +01:00
Markus Pargmann
ebc6eb5907 iio: bmg160: Use generic dev_drvdata
i2c_get_clientdata() is specifically for i2c. Replace it with the
generic dev_get/set_drvdata() to support different protocols.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:22 +01:00
Markus Pargmann
74e04345dc iio: bmg160: Remove i2c_client from data struct
i2c_client variable is not really used anymore in the core driver. It is
only used to get the device to make proper outputs.

This patch replaces all i2c_client usage through direct usage of the
device pointer.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:22 +01:00
Markus Pargmann
c6c9e995bc iio: bmg160: Use i2c regmap instead of direct i2c access
This patch introduces regmap usage into the driver. This is done to
later easily support the SPI interface of this chip.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:21 +01:00
Lars-Peter Clausen
8548a63b37 iio: Move generic buffer implementations to sub-directory
For generic IIO trigger implementations we already have a sub-directory,
but the generic buffer implementations currently reside in the IIO
top-level directory. The main reason is that things have historically grown
into this form.

With more generic buffer implementations on its way now is the perfect time
to clean this up and introduce a sub-directory for generic buffer
implementations to avoid too much clutter in the top-level directory.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-08-16 10:51:21 +01:00
Avri Altman
3c22a0ed59 iwlwifi: mvm: Enable power management on low-latency bss
Currently the driver disable power management on all low-latency
interfaces, while it should disable it on WiDi interfaces only.
Non-P2P interfaces that runs voice and video traffic should enable
power management.

Signed-off-by: Avri Altman <avri.altman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:37:12 +03:00
Arik Nemtsov
7c4f084372 iwlwifi: mvm: support TDLS wider-bandwidth
When TDLS support is declared by the FW, set the bit indicating wider-BW
support as well.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:34:41 +03:00
Dan Carpenter
5b9d47cdde iwlwifi: mvm: fix a range check in debugfs code
The &mvm->tof_data.range_req.ap[] array has IWL_MVM_TOF_MAX_APS elements
so the check should be >= instead of >.  Also the test can underflow so
I have changed "i" to unsigned.

Fixes: ce7929186a ('wlwifi: mvm: add basic Time of Flight (802.11mc FTM) support')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:28:08 +03:00
Andy Shevchenko
3cd6e2f768 iwlwifi: convert hex_dump_to_buffer() to %*ph
There is no need to use hex_dump_to_buffer() in the cases like this:

	hexdump_to_buffer(buf, len, 16, 1, outbuf, outlen, false);	/* len <= 16 */
	sprintf("%s\n", outbuf);

since it maybe easily converted to simple:

	sprintf("%*ph\n", len, buf);

Note: it seems in one case the output is groupped by 2 bytes and looks like a
typo. Thus, patch changes that to plain byte stream.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:22:10 +03:00
Johannes Berg
1be5d8cc16 iwlwifi: pass NAPI struct from transport layer
The mac80211 patch to pass the NAPI struct only changed iwlwifi to
store the NAPI struct, but we can do better: pass it directly from
the lower transport layer to the opmode during RX, and then on to
mac80211 from there.

When we add multiple RX queues, we can then pass the appropriate
NAPI struct properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:21:21 +03:00
Emmanuel Grumbach
473e0bc39b Another pull request for the next cycle, this time with quite
a bit of content:
  * mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Jesse
  * TDLS higher bandwidth support (Arik)
  * OCB fixes from Bertold Van den Bergh
  * suspend/resume fixes from Eliad
  * dynamic SMPS support for minstrel-HT (Krishna Chaitanya)
  * VHT bitrate mask support (Lorenzo Bianconi)
  * better regulatory support for 5/10 MHz channels (Matthias May)
  * basic support for MU-MIMO to avoid the multi-vif issue (Sara Sharon)
 along with a number of other cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABCAAGBQJVzg5bAAoJEDBSmw7B7bqr3PAP/1r8wyZXxtySzz6P5Z9k0+2I
 52NiSUISgmtnaQUyahf4n90eMU+gGJWQwPwIZFvMKg6bD4RW2XI4MdKmviKx8skU
 4sDlDxMFrVMfV/ySwiPDAONWPtwwgKllIt0IDDnKs6kPdDlUcbKOTEFYhzZ1HhTZ
 7Og4rJm7M90QpdMU7hmxmE5KRkp1hW0Yce1KPTW5U0j9yl9zbi4eLVWT+ac1WnZs
 GpItajd0BFtBy7DRHzX8RiRJ4pi+aWxhuYNqiSxUm0BqPWCzT7PP15M1kCGwrXtm
 /TTSVJl7WkLbOYI0PE0Y0XcJfZUg1c9aecCR3ubmRrQrGfOBFpN01jUANIRwqvZ3
 3QRq1RZNLac0+zlBPjoFdOHmoaVX6UcJQKSgOhcfuM1BcNFnXZEcHFN4/SaEUfvJ
 1ltybEeOEAckCMqqfHb1g/nVfJnlBjy811GzIrsHXqKqb7rRfGkfxmBxLrRzVknS
 PC970pbuhxICeeryKdVgK5BClWeT3TB1srt6OZ0QR1zlcfZbLZ8jqJlHJcy3szFi
 P43X9w8I6ZNTzkBU+lsCt9gbveYS+rSaJ+zm/SaF21ro33+FEdZ+p1ujjzp729Tz
 PnKobaOrku38Be7CSwJ760WvngC7gbZqGybGknBsws4dqDXJste0UjxulZeyaOkN
 nVmHDL45jc5rd8qjoPQV
 =kV1a
 -----END PGP SIGNATURE-----

Merge tag 'mac80211-next-for-davem-2015-08-14' into next

Another pull request for the next cycle, this time with quite
a bit of content:
 * mesh fixes/improvements from Alexis, Bob, Chun-Yeow and Jesse
 * TDLS higher bandwidth support (Arik)
 * OCB fixes from Bertold Van den Bergh
 * suspend/resume fixes from Eliad
 * dynamic SMPS support for minstrel-HT (Krishna Chaitanya)
 * VHT bitrate mask support (Lorenzo Bianconi)
 * better regulatory support for 5/10 MHz channels (Matthias May)
 * basic support for MU-MIMO to avoid the multi-vif issue (Sara Sharon)
along with a number of other cleanups.
2015-08-16 10:20:58 +03:00
Ayala Beker
1a84e77160 iwlwifi: mvm: add debug info to schedule scan complete message.
Add more information to schedule scan complete message.

Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:19:39 +03:00
David Spinadel
3b44a0ef12 iwlwifi: mvm: remove partial and full scan lists from lmac sched scan
Lmac sched scan supports partial scans, so we can set some channels to be
scanned on every scan iteration and others to be scanned only on some
iterations. Currently we set all channels to be scanned every iteration,
but still have some configuration of which iterations should be partial
and which should be full.

Remove all partial/full scan configuration to reduce confusions.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:19:39 +03:00
David Spinadel
9437e99410 iwlwifi: mvm: simplify calculating scan dwells and other timing values
Remove timing values from iwl_mvm_scan_params and use defines and
arrays of values instead.

While at that fix few values and corner cases and align all OSs
to ChromeOS values.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:19:38 +03:00
Eliad Peller
80de4321a6 iwlwifi: make sure d3_suspend/resume ops exist
We added calls to d3_suspend/resume trans ops during the
suspend/resume flow.

However, the wrapper code didn't verify the trans ops were
actually defined, resulting in panic when they were not
(such as in the case of sdio trans)

Fixes: 6dfb36c89d ("iwlwifi: call d3_suspend/resume in d0i3 case as well")

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-16 10:14:31 +03:00
Joonyoung Shim
2a8cb48945 drm/exynos: merge exynos_drm_buf.c to exynos_drm_gem.c
The struct exynos_drm_gem_obj can have fields of the struct
exynos_drm_gem_buf then don't need to use exynos_drm_buf.c file.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 14:39:32 +09:00
Joonyoung Shim
01ed50ddbd drm/exynos: use prime helpers
The dma-buf codes of exynos drm is almost same with prime helpers. A
difference is that consider DMA_NONE when import dma-buf, but it's wrong
and we don't consider it any more, so we can use prime interface.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 14:33:45 +09:00
Joonyoung Shim
eb57da880b drm/exynos: remove function roundup_gem_size
The function roundup_gem_size can be merged in exynos_drm_gem_create.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 14:18:10 +09:00
Joonyoung Shim
211b8878c1 drm/exynos: remove function update_vm_cache_attr
The function update_vm_cache_attr can be merged in exynos_drm_gem_mmap.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 14:17:23 +09:00
Joonyoung Shim
c4130bcd6a drm/exynos: remove function check_gem_flags
The function check_gem_flags is too simple, so it's better to move codes
in each consumer functions.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 14:15:48 +09:00
Joonyoung Shim
5f3f42664f drm/exynos: use ERR_PTR instead of NULL in exynos_drm_gem_init
For more correct error information.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:35:13 +09:00
Joonyoung Shim
8e38976ee9 drm/exynos: remove unused fields of struct exynos_drm_gem_buf
The userptr, write and pfnmap of struct exynos_drm_gem_buf are not used
anywhere.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:34:09 +09:00
Joonyoung Shim
67e93c808b drm/exynos: stop copying sg table
Already struct exynos_drm_gem_buf has pages of the buffer, so we don't
need to copy from sg table of the buffer to sg table of dma-buf
attachment, just can make sg table from pages of the buffer.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:33:44 +09:00
Joonyoung Shim
0e9a2ee3bc drm/exynos: remove function exynos_drm_gem_map_buf
The exynos_drm_gem_map_buf can be merged in exynos_drm_gem_fault.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:30:15 +09:00
Joonyoung Shim
67412d15af drm/exynos: remove mutex locking in pagefault handler
There is no reason to use mutex locking in pagefault handler.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:27:25 +09:00
Joonyoung Shim
23597e2642 drm/exynos: remove function convert_to_vm_err_msg
The convert_to_vm_err_msg is called just once by exynos_drm_gem_fault,
so it's simple not to use the function.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:26:42 +09:00
Joonyoung Shim
8139951cae drm/exynos: stop using sgtable in page fault handler
Already struct exynos_drm_gem_buf has pages of the buffer when buffer is
created, so just can use pages in page fault handler, we don't have to
make sgtable of the buffer. But this needs to construct pages of the
buffer that is imported from dma-buf prime.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 13:25:21 +09:00
Len Brown
493f133f47 intel_idle: Skylake Client Support
Skylake Client CPU idle Power states (C-states)
are similar to the previous generation, Broadwell.
However, Skylake does get its own table with updated
worst-case latency and average energy-break-even residency values.

Signed-off-by: Len Brown <len.brown@intel.com>
2015-08-15 22:10:26 -04:00
Gustavo Padovan
2b8376c803 drm/exynos: remove struct exynos_drm_encoder layer
struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.

So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.

v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:35:54 +09:00
Gustavo Padovan
6cf272751b drm/exynos: fold encoder setup into exynos_drm_load()
As we are removing the exynos encoder move the encoder setup operation
directly inside the exynos_drm_load()

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:37 +09:00
Gustavo Padovan
a2986e8032 drm/exynos: remove exynos_drm_create_enc_conn()
This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.

It also does some refactoring in the code like creating a bind function
for dpi devices.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:37 +09:00
Gustavo Padovan
af8be3f6fe drm/exynos: remove exynos_encoder's .commit() op
.commit() is not used anymore, Exynos encoders now follow the
.enable()/.disable() semantics from drm atomic core, so remove this
callback.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:37 +09:00
Gustavo Padovan
07fd6e1f99 drm/exynos: remove extra call to exynos_dp_commit()
exynos_dp_commit() was getting called twice by exynos encoder core, once
inside the .enable() call and another time by .commit() itself.

The remove of the second call caused the wake of a bug, the operations
orders inside exynos_dp_commit was wrong and we had to move
exynos_dp_start_video() to be the last operation in there.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:37 +09:00
Gustavo Padovan
c2c099f2d9 drm/exynos: remove extra call to hdmi_commit()
hdmi_commit() was getting called twice by exynos encoder core, once inside
the .enable() call and another time by .commit() itself.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:37 +09:00
Gustavo Padovan
cf67cc9a29 drm/exynos: remove struct exynos_drm_display
This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.

During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:36 +09:00
Gustavo Padovan
d1fa72d0a6 drm/exynos: simplify calculation of possible CRTCs
All CRTCs can only be LCD, HDMI or VIDI, so basically all CRTCs will be a
possible CRTCs. This patch removes an extra function with switch that was
only checking if the CRTC type was one of those three above.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:36 +09:00
Gustavo Padovan
a090f45ff0 drm/exynos: remove unused .remove() and .check_mode() ops from display
These two display_ops are not used anywhere, remove them.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:36 +09:00
Gustavo Padovan
b6f3c36183 drm/exynos: remove wrappers for phy_power_{on,off}
phy_power_on() and phy_power_off() already checks for NULL pointer.
This patch removes the wrappers exynos_dp_phy_init() and
exynos_dp_phy_exit() since the only think they were doing was a check for
NULL phy.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:36 +09:00
Gustavo Padovan
b6595dc7e1 drm/exynos: split display's .dpms() into .enable() and .disable()
The DRM Core doesn't have a dpms() operation anymore, everything
now is enable() or disable().

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:36 +09:00
Gustavo Padovan
08dd20099f drm/exynos: return return value of exynos_crtc->enable_vblank
Instead of blindly ignore the return value of enable_vblank return it
to the upper DRM layer for error handling.

Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:35 +09:00
Gustavo Padovan
d88d2463fe drm/exynos: unify exynos_drm_plane names with drm core
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-08-16 10:23:35 +09:00