Commit graph

287,481 commits

Author SHA1 Message Date
Johannes Thumshirn
0a66ac17ab mvsas: always iounmap resources
In case pci_resource_start() or pci_resource_len() reutrn 0, mvsas_ioremap
returns without doing an iounmap() of mvi->regs_ex.

Found by the cocinelle tool.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12 11:18:47 -07:00
Thadeu Lima de Souza Cascardo
a30c2a3bf8 qla2xxx: prevent board_disable from running during EEH
Commit f3ddac1918 ("[SCSI] qla2xxx:
Disable adapter when we encounter a PCI disconnect.") has introduced a
code that disables the board, releasing some resources, when reading
0xffffffff.

In case this happens when there is an EEH, this read will trigger EEH
detection and set PCI channel offline. EEH will be able to recover the
card from this state by doing a reset, so it's a better option than
simply disabling the card.

Since eeh_check_failure will mark the channel as offline before
returning the read value, in case there really was an EEH, we can simply
check for pci_channel_offline, preventing the board_disable code from
running if it's true.

Without this patch, EEH code will try to access those same resources
that board_disable will try to free. This race can cause EEH recovery to
fail.

[  504.370577] EEH: Notify device driver to resume
[  504.370580] qla2xxx [0001:07:00.0]-9002:2: The device failed to resume I/O from slot/link_reset.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12 11:17:22 -07:00
Linus Torvalds
04da002d98 Merge branch 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux
Pull amd drm fixes from Alex Deucher:
 "Dave is on vacation at the moment, so please pull these radeon and
  amdgpu fixes directly.

  Just a few minor things for 4.2:

   - add a new radeon pci id
   - fix a power management regression in amdgpu
   - fix HEVC command buffer validation in amdgpu"

* 'drm-fixes-4.2' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: add new OLAND pci id
  Revert "drm/amdgpu: Configure doorbell to maximum slots"
  drm/amdgpu: add context buffer size check for HEVC
2015-08-12 11:13:54 -07:00
Suresh Thiagarajan
d8571b1ecb pm80xx: Added pm8006 controller support
Signed-off-by: Suresh Thiagarajan <Suresh.Thiagarajan@pmcs.com>
Signed-off-by: Viswas G <Viswas.G@pmcs.com>
Acked-by: Jack Wang <xjtuwjp@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12 11:11:14 -07:00
John Soni Jose
660d0831d1 libiscsi: Fix host busy blocking during connection teardown
In case of hw iscsi offload, an host can have N-number of active
connections. There can be IO's running on some connections which
make host->host_busy always TRUE. Now if logout from a connection
is tried then the code gets into an infinite loop as host->host_busy
is always TRUE.

 iscsi_conn_teardown(....)
 {
   .........
    /*
     * Block until all in-progress commands for this connection
     * time out or fail.
     */
     for (;;) {
      spin_lock_irqsave(session->host->host_lock, flags);
      if (!atomic_read(&session->host->host_busy)) { /* OK for ERL == 0 */
	      spin_unlock_irqrestore(session->host->host_lock, flags);
              break;
      }
     spin_unlock_irqrestore(session->host->host_lock, flags);
     msleep_interruptible(500);
     iscsi_conn_printk(KERN_INFO, conn, "iscsi conn_destroy(): "
                 "host_busy %d host_failed %d\n",
	          atomic_read(&session->host->host_busy),
	          session->host->host_failed);

	................
	...............
     }
  }

This is not an issue with software-iscsi/iser as each cxn is a separate
host.

Fix:
Acquiring eh_mutex in iscsi_conn_teardown() before setting
session->state = ISCSI_STATE_TERMINATE.

Signed-off-by: John Soni Jose <sony.john@avagotech.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Chris Leech <cleech@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-12 10:21:20 -07:00
Sinclair Yeh
54fbde8a94 drm/vmwgfx: Fix copyright headers
Updating and fixing copyright headers.
Bump version minor to signal vgpu10 support.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
2015-08-12 10:06:56 -07:00
Sinclair Yeh
fd11a3c0bd drm/vmwgfx: Add DX query support. Various fixes.
Add support for vgpu10 queries. Functional- and formatting fixes.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-12 10:06:51 -07:00
Neha Bhende
0fca749e9a drm/vmwgfx: Add command parser support for a couple of DX commands
Add support for SVGA_3D_CMD_DX_BUFFER_COPY and
SVGA_3D_CMD_DX_PRED_COPY_REGION

Signed-off-by: Neha Bhende <nbhende@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-12 10:06:42 -07:00
Charmaine Lee
2f633e5e40 drm/vmwgfx: Command parser fixes for DX
Implement support for a couple of missing commands and fix a command parser
error path. Also fix uninitialized devcaps and surface size computation.

Signed-off-by: Charmaine Lee <charmainel@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-12 10:06:37 -07:00
Thomas Hellstrom
d80efd5cb3 drm/vmwgfx: Initial DX support
Initial DX support.
Co-authored with Sinclair Yeh, Charmaine Lee and Jakob Bornecrantz.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Charmaine Lee <charmainel@vmware.com>
2015-08-12 10:06:32 -07:00
Sinclair Yeh
8ce75f8ab9 drm/vmwgfx: Update device includes for DX device functionality
Add DX includes and move all device includes to a separate directory.

Co-authored with Thomas Hellstrom, Charmaine Lee and above all,
the VMware device team.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Charmaine Lee <charmainel@vmware.com>
2015-08-12 10:06:26 -07:00
Thomas Hellstrom
5101020c78 drm: export the DRM permission check code
This way drm_ioctl_permit() can be used by drivers

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-12 10:06:18 -07:00
Sinclair Yeh
05c9501859 drm/vmwgfx: Fix crash when unloading vmwgfx v2
This patch fixes two issues.  One, when a surface is a proxy for a DMA
buffer, it holds an extra reference that needs to be cleared.

Two, when fbdev is enabled, we need to unpin the framebuffer before
unloading the driver.  This is done by a call to vmw_fb_off().

v2
Moved unreferencing surface to from vmw_framebuffer_surface_destroy()
to vmw_kms_new_framebuffer()

Added "struct vmw_framebuffer *vfb = NULL;" to silence a compiler
warning.

Removed error checking after calling vmw_surface/dmabuf_reference()

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-12 10:06:13 -07:00
Thomas Hellstrom
df45e9d410 drm/vmwgfx: Fix framebuffer creation on older hardware
On older hardware, texture max width and height is not available, so set
it to something reasonable, like 8192.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-08-12 10:05:44 -07:00
Sinclair Yeh
65ade7d34b drm/vmwgfx: Fixed topology boundary checking for Screen Targets
For a Screen Target capable display device, the display topology is
limited by SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM.  Two values are
checked against this limit:
  1.  Size of the bounding box enclosing all the displays, and
  2.  Size of the total number of displays, e.g. framebuffers

The limitations above mean we do not have exact max width and
height for the topology.  The best current option is to set those to
the maximum texture width/height.

Signed-off-by: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-08-12 10:05:34 -07:00
Alex Deucher
b8826b0cbf Revert "drm/amdgpu: Configure doorbell to maximum slots"
This reverts commit 78ad5cdd21.
This commit breaks dpm and suspend/resume on CZ.
2015-08-12 12:24:04 -04:00
Boyuan Zhang
8c8bac59dd drm/amdgpu: add context buffer size check for HEVC
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
2015-08-12 12:24:03 -04:00
Linus Torvalds
cec45d901e regmap: Fix handling of present bits on rbtree cache block resize
When expanding a cache block we use krealloc() to resize the register
 present bitmap without initialising the newly allocated data (the
 original code was written for kzalloc()).  Add an appropraite memset()
 to fix that.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVyztsAAoJECTWi3JdVIfQ8QIH/RGXFhPUPWdXhi4JYn8+bIGb
 6SSBzsxGlCocWBrzyaZRcz/WB7Na7t+oXoYEjk8CA+/8zPLRoCXHKmIETmQW0+7G
 hUY+YNk8xxUtPuReeGgqZ7z9l9mC2f0UVPvgWn6dELamxtqr0LmODdKp5D3vLQLp
 c2eFqZr3wjYwC9vuWElaUftyQzSYaj6Rr6PnZ6bD/pN/YY3zd53gt7QluT9SzUxs
 5uZXhd1UD6GTDxCrtfqemlEaOYpQOdMO0h/3Eko4MbdCeq3bOq6kn9a+E7nfvE4v
 dIeEdafqVABgKHi66B83Fu/5eJI+kI+qo9u2QuWLB9AWAJnZuiZc968eIDaKMBE=
 =GTVe
 -----END PGP SIGNATURE-----

Merge tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "regmap: Fix handling of present bits on rbtree cache block resize

  When expanding a cache block we use krealloc() to resize the register
  present bitmap without initialising the newly allocated data (the
  original code was written for kzalloc()).  Add an appropraite memset()
  to fix that"

* tag 'regmap-fix-v4.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: regcache-rbtree: Clean new present bits on present bitmap resize
2015-08-12 09:06:39 -07:00
Thierry Reding
d4853630b3 drm/atomic: Use KMS VBLANK API
Instead of using the legacy VBLANK API, use the new KMS API. This is
part of an effort to convert all existing users so that the KMS API can
be changed to properly use per-CRTC data.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:41:30 +02:00
Thierry Reding
c30e11fc66 drm/irq: Document return values more consistently
Some of the functions are documented inconsistently. Add Returns:
sections where missing and use consistent style to describe the return
value.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:40:31 +02:00
Thierry Reding
cc1ef118fc drm/irq: Make pipe unsigned and name consistent
Name all references to the pipe number (CRTC index) consistently to make
it easier to distinguish which is a pipe number and which is a pointer
to struct drm_crtc.

While at it also make all references to the pipe number unsigned because
there is no longer any reason why it should ever be negative.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:39:52 +02:00
Thierry Reding
7d1de85163 drm/irq: Check for valid VBLANK before dereference
When accessing the array of per-CRTC VBLANK structures we must always
check that the index into the array is valid before dereferencing to
avoid crashing.

Signed-off-by: Thierry Reding <treding@nvidia.com>
[danvet: Squash in my own whitespace ocd fixup in drm_vblank_count.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:39:47 +02:00
viresh kumar
fc0a446152 dm: remove unlikely() before IS_ERR()
IS_ERR() already contains an 'unlikely' compiler flag so there is no
need to do that again from IS_ERR() callers.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:21 -04:00
Vivek Goyal
e80d1c805a dm: do not override error code returned from dm_get_device()
Some of the device mapper targets override the error code returned by
dm_get_device() and return either -EINVAL or -ENXIO.  There is nothing
gained by this override.  It is better to propagate the returned error
code unchanged to caller.

This work was motivated by hitting an issue where the underlying device
was busy but -EINVAL was being returned.  After this change we get
-EBUSY instead and it is easier to figure out the problem.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:21 -04:00
Mikulas Patocka
ab37844d61 dm: test return value for DM_MAPIO_SUBMITTED
In properly written code we should not assume that DM_MAPIO_SUBMITTED is
zero. We should test the return value for DM_MAPIO_SUBMITTED rather than
testing it for zero.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:20 -04:00
Sami Tolvanen
4fb9aa5abd dm verity: remove unused mempool
Since commit 003b5c571 ("block: Convert drivers to immutable biovecs"),
vec_mempool in struct dm_verity is no longer used.  Remove it and
related definitions.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:20 -04:00
Joe Thornber
e44b6a5a3c dm cache: move wake_waker() from free_migrations() to where it is needed
This stops spurious wake ups from calls to prealloc_free_structs().

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:20 -04:00
Vivek Goyal
8c747fd0c3 dm btree remove: remove unused function get_nr_entries()
rebalance_children() calls get_nr_entries() and assigns the result to an
unused local 'child_entries' variable.  Remove get_nr_entries() and
cleanup rebalance_children() accordingly.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:19 -04:00
Vivek Goyal
0a8d4c3ef8 dm btree: remove unused "dm_block_t root" parameter in btree_split_sibling()
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:19 -04:00
Joe Thornber
4051aab762 dm cache policy smq: change the mutex to a spinlock
We no longer sleep in any of the smq functions, so this can become a
spinlock.  Switching from mutex to spinlock improves performance when
the fast cache device is a very low latency device (e.g. NVMe SSD).

The switch to spinlock also allows for removal of the extra tick_lock;
which is no longer needed since the main lock being a spinlock now
fulfills the locking requirements needed by interrupt context.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:32:19 -04:00
Thierry Reding
2a7d3d6d5d drm/irq: Remove negative CRTC index special-case
The drm_send_vblank_event() function treats negative CRTC indices as
meaning that a driver doesn't have proper VBLANK handling. This is the
only place where DRM needs negative CRTC indices, so in order to enable
subsequent cleanup, remove this special case and replace it by the more
obvious check for whether or not VBLANK support was initialized.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:28:21 +02:00
Yi Zhang
34dd051741 dm cache policy smq: move 'dm-cache-default' module alias to SMQ
When creating dm-cache with the default policy, it will call
request_module("dm-cache-default") to register the default policy.
But the "dm-cache-default" alias was left referring to the MQ policy.
Fix this by moving the module alias to SMQ.

Fixes: bccab6a0 (dm cache: switch the "default" cache replacement policy from mq to smq)
Signed-off-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-08-12 11:27:29 -04:00
Thierry Reding
45e3743aff drm/plane: Use consistent data types for format count
Rather than a mix of the the sized uint32_t and signed integer, use an
unsized unsigned int to specify the format count.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:14:24 +02:00
Thierry Reding
798ae0f669 vga_switcheroo: Remove unnecessary checks
debugfs_remove() gracefully ignores NULL parameters, so the explicit
checks can be removed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:13:19 +02:00
Thierry Reding
7491bfb446 vga_switcheroo: Wrap overly long lines
Wrap overly long lines to make checkpatch happy. While at it, also add
blank lines after declarations to eliminate additional problems flagged
by checkpatch.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:13:18 +02:00
Thierry Reding
9b0be1ebec vga_switcheroo: Use pr_fmt()
Use pr_fmt() to define the "vga_switcheroo: " prefix that is prepended
to all output messages emitted by pr_*() functions. This allows making
existing strings much shorter and eliminates a bunch of warnings from
checkpatch about lines being overly long.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:13:18 +02:00
Thierry Reding
7130927830 vga_switcheroo: Cleanup header comment
The header comment uses a weird combination of formatting styles. Make
it consistent.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:11:59 +02:00
Thierry Reding
bf8252b3fc vga_switcheroo: Use pr_*() instead of printk()
This silences a bunch of checkpatch warnings and makes the code shorter.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:11:59 +02:00
Thierry Reding
5d90ccf908 vgaarb: Fix a few checkpatch errors and warnings
Wrap overly long lines (offending lines were mostly comments, so trivial
to fix up) and a number of other coding style issues pointed out by the
checkpatch tool.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:11:58 +02:00
Thierry Reding
8b7e2e865f vgaarb: Use vgaarb: prefix consistently in messages
Define the pr_fmt() macro to causes all messages emitted by pr_*()
functions to be prefixed with "vgaarb: ".

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:11:58 +02:00
Thierry Reding
eb6944f2fc vgaarb: Stop complaining about absent devices
Some setups do not register a default VGA device, in which case the VGA
arbiter will still complain about the (non-existent) PCI device being a
non-VGA device.

Fix this by making the error message conditional on a default VGA device
having been set up. Note that the easy route of erroring out early isn't
going to work because otherwise priv->target won't be properly updated.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-12 17:11:57 +02:00
Joe Thornber
b0dc3c8bc1 dm btree: add ref counting ops for the leaves of top level btrees
When using nested btrees, the top leaves of the top levels contain
block addresses for the root of the next tree down.  If we shadow a
shared leaf node the leaf values (sub tree roots) should be incremented
accordingly.

This is only an issue if there is metadata sharing in the top levels.
Which only occurs if metadata snapshots are being used (as is possible
with dm-thinp).  And could result in a block from the thinp metadata
snap being reused early, thus corrupting the thinp metadata snap.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2015-08-12 10:50:37 -04:00
Joe Thornber
7f518ad0a2 dm thin metadata: delete btrees when releasing metadata snapshot
The device details and mapping trees were just being decremented
before.  Now btree_del() is called to do a deep delete.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
2015-08-12 10:42:51 -04:00
Frederic Danis
50d78bcf5d Bluetooth: hci_bcm: Fix "implicit declaration"
The kbuild test robot reported implicit declaration of function
'acpi_dev_get_resources'.

Surround ACPI function by CONFIG_ACPI test.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-12 16:41:32 +02:00
Uwe Kleine-König
62aaefa7d0 Bluetooth: hci_bcm: improve use of gpios API
devm_gpiod_get currently has an optional parameter to set initial
direction and value for the requested gpio. Make use of this to simplify
the driver and make it not fail to build when this parameter is made
mandatory (which is scheduled for 4.3-rc1).

Moreover use the _optional variant of devm_gpiod_get to simplify error
handling (which also gets more strict for free).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-12 16:35:44 +02:00
Joerg Roedel
f303e50766 iommu/vt-d: Avoid duplicate device_domain_info structures
When a 'struct device_domain_info' is created as an alias
for another device, this struct will not be re-used when the
real device is encountered. Fix that to avoid duplicate
device_domain_info structures being added.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:37 +02:00
Joerg Roedel
08a7f456a7 iommu/vt-d: Only insert alias dev_info if there is an alias
For devices without an PCI alias there will be two
device_domain_info structures added. Prevent that by
checking if the alias is different from the device.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
127c761598 iommu/vt-d: Pass device_domain_info to __dmar_remove_one_dev_info
This struct contains all necessary information for the
function already. Also handle the info->dev == NULL case
while at it.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
2309bd793e iommu/vt-d: Remove dmar_global_lock from device_notifier
The code in the locked section does not touch anything
protected by the dmar_global_lock. Remove it from there.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
55d940430a iommu/vt-d: Get rid of domain->iommu_lock
When this lock is held the device_domain_lock is also
required to make sure the device_domain_info does not vanish
while in use. So this lock can be removed as it gives no
additional protection.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00