Commit graph

287,481 commits

Author SHA1 Message Date
Joerg Roedel
de7e888646 iommu/vt-d: Only call domain_remove_one_dev_info to detach old domain
There is no need to make a difference here between VM and
non-VM domains, so simplify this code here.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
d160aca527 iommu/vt-d: Unify domain->iommu attach/detachment
Move the code to attach/detach domains to iommus and vice
verce into a single function to make sure there are no
dangling references.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
c6c2cebd66 iommu/vt-d: Establish domain<->iommu link in dmar_insert_one_dev_info
This makes domain attachment more synchronous with domain
deattachment. The domain<->iommu link is released in
dmar_remove_one_dev_info.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
dc534b25d1 iommu/vt-d: Pass an iommu pointer to domain_init()
This allows to do domain->iommu attachment after domain_init
has run.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:36 +02:00
Joerg Roedel
2452d9db12 iommu/vt-d: Rename iommu_detach_dependent_devices()
Rename this function and the ones further down its
call-chain to domain_context_clear_*. In particular this
means:

	iommu_detach_dependent_devices -> domain_context_clear
		   iommu_detach_dev_cb -> domain_context_clear_one_cb
		      iommu_detach_dev -> domain_context_clear_one

These names match a lot better with its
domain_context_mapping counterparts.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:35 +02:00
Joerg Roedel
e6de0f8dfc iommu/vt-d: Rename domain_remove_one_dev_info()
Rename the function to dmar_remove_one_dev_info to match is
name better with its dmar_insert_one_dev_info counterpart.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:35 +02:00
Joerg Roedel
5db31569e9 iommu/vt-d: Rename dmar_insert_dev_info()
Rename this function to dmar_insert_one_dev_info() to match
the name better with its counter part function
domain_remove_one_dev_info().

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:35 +02:00
Joerg Roedel
cc4e2575cc iommu/vt-d: Move context-mapping into dmar_insert_dev_info
Do the context-mapping of devices from a single place in the
call-path and clean up the other call-sites.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:35 +02:00
Joerg Roedel
76f45fe35c iommu/vt-d: Simplify domain_remove_dev_info()
Just call domain_remove_one_dev_info() for all devices in
the domain instead of reimplementing the functionality.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:35 +02:00
Joerg Roedel
b608ac3b6d iommu/vt-d: Simplify domain_remove_one_dev_info()
Simplify this function as much as possible with the new
iommu_refcnt field.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
42e8c186b5 iommu/vt-d: Simplify io/tlb flushing in intel_iommu_unmap
We don't need to do an expensive search for domain-ids
anymore, as we keep track of per-iommu domain-ids.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
29a27719ab iommu/vt-d: Replace iommu_bmp with a refcount
This replaces the dmar_domain->iommu_bmp with a similar
reference count array. This allows us to keep track of how
many devices behind each iommu are attached to the domain.

This is necessary for further simplifications and
optimizations to the iommu<->domain attachment code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
af1089ce38 iommu/vt-d: Kill dmar_domain->id
This field is now obsolete because all places use the
per-iommu domain-ids. Kill the remaining uses of this field
and remove it.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
0dc7971594 iommu/vt-d: Don't pre-allocate domain ids for si_domain
There is no reason for this special handling of the
si_domain. The per-iommu domain-id can be allocated
on-demand like for any other domain. So remove the
pre-allocation code.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
a1ddcbe930 iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi
This function can figure out the domain-id to use itself
from the iommu_did array. This is more reliable over
different domain types and brings us one step further to
remove the domain->id field.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:34 +02:00
Joerg Roedel
de24e55395 iommu/vt-d: Simplify domain_context_mapping_one
Get rid of the special cases for VM domains vs. non-VM
domains and simplify the code further to just handle the
hardware passthrough vs. page-table case.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:33 +02:00
Joerg Roedel
28ccce0d95 iommu/vt-d: Calculate translation in domain_context_mapping_one
There is no reason to pass the translation type through
multiple layers. It can also be determined in the
domain_context_mapping_one function directly.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:33 +02:00
Joerg Roedel
e2411427f7 iommu/vt-d: Get rid of iommu_attach_vm_domain()
The special case for VM domains is not needed, as other
domains could be attached to the iommu in the same way. So
get rid of this special case.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:33 +02:00
Joerg Roedel
8bf478163e iommu/vt-d: Split up iommu->domains array
This array is indexed by the domain-id and contains the
pointers to the domains attached to this iommu. Modern
systems support 65536 domain ids, so that this array has a
size of 512kb, per iommu.

This is a huge waste of space, as the array is usually
sparsely populated. This patch makes the array
two-dimensional and allocates the memory for the domain
pointers on-demand.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:33 +02:00
Joerg Roedel
9452d5bfe5 iommu/vt-d: Add access functions for iommu->domains
This makes it easier to change the layout of the data
structure later.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:33 +02:00
Joerg Roedel
c0e8a6c803 iommu/vt-d: Keep track of per-iommu domain ids
Instead of searching in the domain array for already
allocated domain ids, keep track of them explicitly.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
2015-08-12 16:23:32 +02:00
Xiubo Li
b486afbd1b regmap: fix typos in regmap.c
There are two typos in drivers/base/regmap/regmap.c, and they may
introduce some noise when checking new patches.

Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-12 13:36:32 +01:00
Jamie Lentin
3cb5ff0220 HID: lenovo: Hide middle-button press until release
Don't relay a middle button press to userspace until release, and then
only if there was no scroll events inbetween. This is closer to what
Xorg's wheel emulation does, and avoids spurious middle-click pastes.

Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-12 14:32:31 +02:00
Jamie Lentin
dbfebb44b7 HID: lenovo: Add missing return-value check
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-12 14:31:39 +02:00
Jamie Lentin
7f65068fb7 HID: lenovo: Use constants for axes names
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-08-12 14:31:39 +02:00
Mark Brown
609ca5f3cb regulator: core: Use class device list for regulator_list in late init
The regulator_list has exactly the same contents as the list that the
driver core maintains of regulator_class members so is redundant. As a
first step in converting over to use the class device list convert our
iteration in late_initcall() to use the class device iterator.

Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-12 13:21:14 +01:00
Markus Pargmann
2f9b660b21 regmap: Fix integertypes for register address and value
These values are defined as unsigned int in the struct and are assigned
to int values.

This patch fixes the type to be unsigned int instead.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-12 13:07:23 +01:00
Ingo Molnar
9b9412dc70 Merge branch 'for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu
Pull RCU changes from Paul E. McKenney:

  - The combination of tree geometry-initialization simplifications
    and OS-jitter-reduction changes to expedited grace periods.
    These two are stacked due to the large number of conflicts
    that would otherwise result.

    [ With one addition, a temporary commit to silence a lockdep false
      positive. Additional changes to the expedited grace-period
      primitives (queued for 4.4) remove the cause of this false
      positive, and therefore include a revert of this temporary commit. ]

  - Documentation updates.

  - Torture-test updates.

  - Miscellaneous fixes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-12 12:12:12 +02:00
Mark Brown
29f5f4860a regulator: core: Move more deallocation into class unregister
We really ought to be using the class dvice lifetime management features
more than we are rather than open coding them so take a step towards that
by moving some of the simplest deallocations to the dev_release() function.

Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-12 11:01:30 +01:00
Mark Brown
1768514eeb regulator: core: Reduce rdev locking region when releasing regulator
When we release a regulator we need to remove references to it from the
rdev which means locking the rdev.  Currently we also free resources
associated with the regulator inside the rdev lock but there is no need
to do this, we can reduce the region the lock is held by restricting it
to just actions that affect the rdev.

Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-12 11:01:29 +01:00
Ingo Molnar
f52609fdab Merge branch 'locking/arch-atomic' into locking/core, because it's ready for upstream
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-08-12 11:44:30 +02:00
Hans de Goede
8de4efdaf3 mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
Add a cell for the usb power_supply part of the axp20x PMICs.

Note that this cell is only for the usb power_supply part and not the
ac-power / battery-charger / rtc-backup-bat-charger bits.

Depending on the board each of those must be enabled / disabled separately
in devicetree as most boards do not use all 4. So in dt each one needs its
own child-node of the axp20x node. Another reason for using separate child
nodes for each is so that other devicetree nodes can have a power-supply
property with a phandle referencing a node representing a single
power-supply.

The decision to use a separate devicetree node for each is reflected on
the kernel side by each getting its own mfd-cell / platform_device and
platform-driver.

Note this commit also makes some whitespace changes to the intialization
of existing cells in axp20x_cells, these are pure whitespace changes,
functionally nothing changes.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-12 09:59:39 +01:00
Bruno Prémont
553ed4b5df mfd: axp20x: Add missing registers, and mark more registers volatile
Add an extra set of registers which is necessary tu support the PMICs
battery charger function, and mark registers which contain status bits,
gpio status, and adc readings as volatile.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-12 09:59:11 +01:00
Charles Keepax
3762aede11 mfd: arizona: Fixup some formatting/white space errors
Clear out a few checkpatch warnings and white space errors.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-12 09:59:04 +01:00
Tomeu Vizoso
e984a1791a memory: omap-gpmc: Don't try to save uninitialized GPMC context
If for some reason the GPMC device hasn't been probed yet, gpmc_base is
going to be NULL. Because there's no context yet to be saved, just turn
these functions into no-ops until that device gets probed.

Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = c0204000
[00000010] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc5-next-20150804-05947-g23f38fe8eda9 #1
Hardware name: Generic OMAP3-GP (Flattened Device Tree)
task: c0e623e8 ti: c0e5c000 task.ti: c0e5c000
PC is at omap3_gpmc_save_context+0x8/0xc4
LR is at omap_sram_idle+0x154/0x23c
pc : [<c087c7ac>]    lr : [<c023262c>]    psr: 60000193
sp : c0e5df40  ip : c0f92a80  fp : c0999eb0
r10: c0e57364  r9 : c0e66f14  r8 : 00000003
r7 : 00000000  r6 : 00000003  r5 : 00000000  r4 : c0f5f174
r3 : c0fa4fe8  r2 : 00000000  r1 : 00000000  r0 : fa200280
Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5387d  Table: 80204019  DAC: 00000015
Process swapper/0 (pid: 0, stack limit = 0xc0e5c220)
Stack: (0xc0e5df40 to 0xc0e5e000)
df40: 00000000 c0e66ef8 c0f5f1a4 00000000 00000003 c02333a4 c3813822 00000000
df60: 00000000 c0e5a5c8 cfb8a5d0 c07f0c44 0e4f1d7e 00000000 00000000 00000000
df80: c3813822 00000000 cfb8a5d0 c0e5e4e4 cfb8a5d0 c0e66f14 c0e5a5c8 c0e5e54c
dfa0: c0e5e544 c0e57364 c0999eb0 c0277758 000000fa c0f5d000 00000000 c0d61c18
dfc0: ffffffff ffffffff 00000000 c0d61674 00000000 c0df7a48 00000000 c0f5d5d4
dfe0: c0e5e4c0 c0df7a44 c0e634f8 80204059 00000000 8020807c 00000000 00000000
[<c087c7ac>] (omap3_gpmc_save_context) from [<c023262c>] (omap_sram_idle+0x154/0x23c)
[<c023262c>] (omap_sram_idle) from [<c02333a4>] (omap3_enter_idle_bm+0xec/0x1a8)
[<c02333a4>] (omap3_enter_idle_bm) from [<c07f0c44>] (cpuidle_enter_state+0xbc/0x284)
[<c07f0c44>] (cpuidle_enter_state) from [<c0277758>] (cpu_startup_entry+0x174/0x24c)
[<c0277758>] (cpu_startup_entry) from [<c0d61c18>] (start_kernel+0x358/0x3c0)
[<c0d61c18>] (start_kernel) from [<8020807c>] (0x8020807c)
Code: c0ccace8 c0ccacc0 e59f30b4 e5932000 (e5921010)

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Suggested-by: Javier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
[tony@atomide.com: updated description as suggested by Javier]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-12 01:43:49 -07:00
Sjoerd Simons
bea047e075 clk: rockchip: Fix SPIF special clock definition
Neither spdif_src nor spdif_pll exists, judging by the vendor kernel in
both cases spdif_pre was meant. This brings the naming in line and
hierachy in line with that of sclk_i2s0.

Also allow sclk_spdif and spdif_frac to change their parents rate as
that the upstream dividers are purely there to feed sclk_spdif

Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-12 00:59:22 -07:00
Eric Anholt
d24d2ec60f clk: bcm2835: Drop the fixed sys_pclk.
Nothing uses it, and I can't find any evidence that anything ever has.
Its role is now filled by the core clock in the firmware driver.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-08-12 00:59:20 -07:00
Heiko Stuebner
e6500344ed clk: track the orphan status of clocks and their children
While children of orphan clocks are not carried in the orphan-list itself,
they're nevertheless orphans in their own right as they also don't have an
input-rate available. To ease tracking if a clock is an orphan or has an
orphan in its parent path introduce an orphan field into struct clk and
update it and the fields in child-clocks when a clock gets added or removed
from the orphan-list.

Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Alex Elder <elder@linaro.org>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: kernel@pengutronix.de
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Cc: Chao Xie <chao.xie@marvell.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Georgi Djakov <georgi.djakov@linaro.org>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Barry Song <baohua@kernel.org>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
Cc: emilio@elopez.com.ar
Cc: Peter De Schrijver <pdeschrijver@nvidia.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
[sboyd@codeaurora.org: s/clk/core/ in new function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-12 00:59:18 -07:00
Maxime Ripard
ee38b2698a clk: sunxi: Add a simple gates driver
The gates were handled with a common piece of framework that was
registering all gates array, that was not using the CLK_OF_DECLARE logic,
and was not using clock-indices but some private masks that were pretty
much equivalent.

Move this code in a new driver that handles all the gates array and solves
both these issues.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
[sboyd@codeaurora.org: Include clk.h for consumer API usage]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-12 00:59:15 -07:00
Michael Turquette
5c489ccad8 Merge tag 'imx-clk-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next
The i.MX clock updates for 4.3:
 - Provide a better IPU clock initial settings on imx6dl for getting
   HDMI and LVDS at the same time.
 - Add clock driver support for i.MX6UL SoC
 - Add a second clock for RTC device on i.MX31 and i.MX35
2015-08-12 00:59:00 -07:00
Daniel Axtens
83c3fee7e7 cxl: sparse: Silence iomem warning in debugfs file creation
An IO address, tagged with __iomem, is passed to debugfs_create_file
as private data. This requires that it be cast to void *. The cast
drops the __iomem annotation and so creates a sparse warning:

  drivers/misc/cxl/debugfs.c:51:57: warning: cast removes address space of expression

The address space marker is added back in the file operations
(fops_io_u64).

Silence the warning with __force.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-12 14:49:29 +10:00
Daniel Axtens
3d6b040e73 cxl: sparse: Make declarations static
A few declarations were identified by sparse as needing to be static:

  drivers/misc/cxl/irq.c:408:6: warning: symbol 'afu_irq_name_free' was not declared. Should it be static?
  drivers/misc/cxl/irq.c:467:6: warning: symbol 'afu_register_hwirqs' was not declared. Should it be static?
  drivers/misc/cxl/file.c:254:6: warning: symbol 'afu_compat_ioctl' was not declared. Should it be static?
  drivers/misc/cxl/file.c:399:30: warning: symbol 'afu_master_fops' was not declared. Should it be static?

Make them static.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-08-12 14:49:09 +10:00
Geert Uytterhoeven
f04b486d34 clk: shmobile: rz: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the RZ Clock Pulse Generator (CPG) driver
using the generic PM Domain.  This allows to power-manage the module
clocks of SoC devices that are part of the CPG/MSTP Clock Domain using
Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:28 +09:00
Geert Uytterhoeven
63e05d9365 clk: shmobile: rcar-gen2: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car Gen2 Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:28 +09:00
Geert Uytterhoeven
b31fc90c14 clk: shmobile: r8a7779: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car H1 Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Also update the reg property in the DT binding doc example to match the
actual dtsi, which uses #address-cells and #size-cells == 1, not 2.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:27 +09:00
Geert Uytterhoeven
8bc964aa25 clk: shmobile: r8a7778: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the R-Car M1A Clock Pulse Generator (CPG)
driver using the generic PM Domain.  This allows to power-manage the
module clocks of SoC devices that are part of the CPG/MSTP Clock Domain
using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a proper
"power-domains" property.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:27 +09:00
Geert Uytterhoeven
752b5ed5f6 clk: shmobile: Add CPG/MSTP Clock Domain support
Add Clock Domain support to the Clock Pulse Generator (CPG) Module Stop
(MSTP) Clocks driver using the generic PM Domain.  This allows to
power-manage the module clocks of SoC devices that are part of the
CPG/MSTP Clock Domain using Runtime PM, or for system suspend/resume.

SoC devices that are part of the CPG/MSTP Clock Domain and can be
power-managed through an MSTP clock should be tagged in DT with a
proper "power-domains" property.

The CPG/MSTP Clock Domain code will scan such devices for clocks that
are suitable for power-managing the device, by looking for a clock that
is compatible with "renesas,cpg-mstp-clocks".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-12 10:31:26 +09:00
Mauro Carvalho Chehab
ca05189716 [media] c8sectpfe: use a new Kconfig menu for DVB platform drivers
While this is the first DVB platform drivers, let's keep the
Kconfig options well organized, adding it on its own DVB menu.

Of course, it should depend on MEDIA_DIGITAL_TV_SUPPORT, as
this enables all DVB-related menus.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:28:23 -03:00
Mauro Carvalho Chehab
7d0ddc91c8 [media] tda10071: use div_s64() when dividing a s64 integer
Otherwise, it will break on 32 bits archs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:19:30 -03:00
Mauro Carvalho Chehab
53cc7c9043 [media] c8sectpfe: fix pinctrl dependencies
compiling on some archs fail with:

drivers/media/platform/sti/c8sectpfe/c8sectpfe-core.c:540:8: error: implicit declaration of function ‘pinctrl_select_state’ [-Werror=implicit-function-declaration]
  ret = pinctrl_select_state(fei->pinctrl, tsin->pstate);

That's due the need of including pinctrl.h header and because
CONFIG_PINCTRL needs to be true.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-08-11 19:19:08 -03:00