By returning the error code directly, we can avoid the jump label
error_out.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
dprintk has some name collisions with other frameworks and drivers. It
is also not necessary to have these custom debug print filters. Dynamic
debug offers the same amount of filtered debugging.
This patch replaces all dprintks with dev_dbg(). It also removes the
ioctl dprintk which prints the ingoing ioctls which should be
replaceable by strace or similar stuff.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
The block subsystem uses loff_t to store the device size. Change the
type for nbd_device bytesize to loff_t.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
kthread_run includes the wake_up_process() call, so instead of
kthread_create() followed by wake_up_process() we can use this macro.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
The header is not included anywhere. Remove it and include the private
nbd_device struct in nbd.c.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull dmaengine fixes from Vinod Koul:
"This time we have addition of caps for jz4740 which fixes intentional
warning at boot. Then we have memory leak issues in drivers using
virt-dma by Peter on few drive"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: moxart-dma: Fix memory leak when stopping a running transfer
dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
dmaengine: omap-dma: Fix memory leak when terminating running transfer
dmaengine: edma: fix memory leak when terminating running transfers
dmaengine: jz4740: Define capabilities
Pull networking fixes from David Miller:
1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
Johannes Berg.
2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
Finger.
3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
otherwise we can crash, from WANG Cong.
4) mlx4 driver does register_netdev() too early in the probe sequence,
from Ido Shamay.
5) Don't allow router discovery hop limit to decrease the interface's
hop limit, from D.S. Ljungmark.
6) tx_packets and tx_bytes improperly accounted for certain classes of
USB network devices, fix from Ben Hutchings.
7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
tables in the error path, they must instead use ip{6}mr_free_table().
Fix from WANG Cong.
8) cxgb4 doesn't properly quiesce all RX activity before unregistering
the netdevice. Fix from Hariprasad Shenai.
9) Fix hash corruptions in ipvlan driver, from Jiri Benc.
10) nla_memcpy(), like a real memcpy, should fully initialize the
destination buffer, even if the source attribute is smaller. Fix
from Jiri Benc.
11) Fix wrong error code returned from iucv_sock_sendmsg(). We should
use whatever sock_alloc_send_skb() put into 'err'. From Eugene
Crosser.
12) Fix slab object leak on module unload in TIPC, from Ying Xue.
13) Need a READ_ONCE() when reading the cached RX socket route in
tcp_v{4,6}_early_demux(). From Michal Kubecek.
14) Still too many problems with TPC support in the ath9k driver, so
disable it for now. From Felix Fietkau.
15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
Larry Finger.
16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
King.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cxgb4: Fix to dump devlog, even if FW is crashed
cxgb4: Firmware macro changes for fw verison 1.13.32.0
bnx2x: Fix kdump when iommu=on
bnx2x: Fix kdump on 4-port device
mac80211: fix RX A-MPDU session reorder timer deletion
MAINTAINERS: Update Intel Wired Ethernet Driver info
tipc: fix a slab object leak
net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
af_iucv: fix AF_IUCV sendmsg() errno
openvswitch: Return vport module ref before destruction
netlink: pad nla_memcpy dest buffer with zeroes
bonding: Bonding Overriding Configuration logic restored.
ipvlan: fix check for IP addresses in control path
ipvlan: do not use rcu operations for address list
ipvlan: protect against concurrent link removal
ipvlan: fix addr hash list corruption
net: fec: setup right value for mdio hold time
net: tcp6: fix double call of tcp_v6_fill_cb()
cxgb4vf: Fix sparse warnings
netns: don't clear nsid too early on removal
...
Now that the peer netns is advertised in rtnl messages, we can set this property
so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get
the full veth configuration.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use dev->iflink anymore.
CC: Roland Dreier <roland@kernel.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use dev->iflink anymore.
CC: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't use dev->iflink anymore.
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The goal of this patch is to prepare the removal of the iflink field. It
introduces a new ndo function, which will be implemented by virtual interfaces.
There is no functional change into this patch. All readers of iflink field
now call dev_get_iflink().
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for the AM-800480R3TMQW-A1H 7" 800x480 panel to the
DRM simple panel driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HannStar HSD070PWW1 LVDS panel data sheet lists allowed ranges
additionally to the typical values for pixel clock rate (64.3-82 MHz)
and blanking intervals (54-681 clock cycles horizontally, 3-23 lines
vertically).
This patch replaces this panel's display mode with the display timing
information to describe acceptable timings. Since the HSYNC and VSYNC
are unused, the distribution between front porches, back porches, and
sync pulse lengths was chosen at will.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The simple panel driver's ->get_modes() implementation calculates the
display mode list from the typical timings and the ->get_timings()
implementation returns the timings to the connected encoder for mode
validation and fixup.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[treding@nvidia.com: select VIDEOMODE_HELPERS]
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds support for the COM43H4M85ULC 3.7" 800x480 panel to the
DRM simple panel driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This patch adds the bus_format field to the GPG482739QS5 panel structure.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AUO b101ean01 panel is a 10.1" 1280x800 panel which can be supported
by the simple panel driver.
Signed-off-by: Huang Lin <hl@rock-chips.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Innolux ZJ070NA-01P is a 7.0" TFT LCD panel with an integrated LED
backlight unit.
This panel is used on the Technexion Toucan.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Innolux AT043TN24 4.3" WQVGA TFT LCD panel.
This panel with backlight is found in PDA 4.3" LCD screen (TM43xx series for
instance).
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Shelly SCA07010-BFN-LNN is a 7.0" WVGA TFT LCD panel.
This panel with backlight is found in PDA 7" LCD screen (TM70xx series for
instance).
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This panel is used by the Nyan Blaze board and can be supported by the
simple-panel driver.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
[tomeu.vizoso@collabora.com: add device tree binding document]
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Properly verify that the resulting page aligned end address is larger
than both the start address and the length of the memory area requested.
Both the start and length arguments for ib_umem_get are controlled by
the user. A misbehaving user can provide values which will cause an
integer overflow when calculating the page aligned end address.
This overflow can cause also miscalculation of the number of pages
mapped, and additional logic issues.
Addresses: CVE-2014-8159
Cc: <stable@vger.kernel.org>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
As there isn't a way for the firmware on the Nyan Chromebooks to hand
over the display to the kernel, and the kernel isn't redoing the whole
configuration at present.
With this patch, the SOR is brought to a known state and we get correct
display on every boot.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is called by output drivers so should be documented. While
at it, move it to a more appropriate location.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The ->mode_set() and ->mode_set_base() callbacks are no longer used with
full atomic mode-setting drivers, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The tegra_dc_setup_clock() function is unused after the conversion to
atomic mode-setting, so remove it.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of duplicating the code, make use of the newly introduced atomic
state duplicate and destroy helpers. This allows changes to the base
atomic state handling to automatically propagate to the Tegra driver and
thereby prevent breakage resulting from both copies going out of sync.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drivers that subclass CRTC, plane or connector state need to carefully
duplicate the code that the atomic helpers have. This is bound to cause
breakage eventually because it requires auditing all drivers and update
them when code is added to the helpers.
In order to avoid that, implement new helpers that perform the required
steps when copying and destroying state. These new helpers are exported
so that state-subclassing drivers can use them. The default helpers are
implemented using them as well, providing a single location that needs
to be changed when adding to base atomic states.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controller on Tegra can use syncpoints to count VBLANK
events. syncpoints are 32-bit unsigned integers, so well suited as
VBLANK counters.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This function is used to read the current value of the syncpt and is
useful in situations where drivers don't schedule work and wait for the
syncpoint to increment. One particular use-case is using the syncpoint
as a VBLANK counter.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use a sized unsigned 32-bit data type (u32) to store register contents.
The SOR registers are 32 bits wide irrespective of the architecture's
data width.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM driver uses a single IO virtual address space for buffer
mappings. Provide a table of the address space usage in debugfs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Check that the desired parent clock is indeed a valid parent for the
display controller clock. This is purely cosmetic at this point since
the parent clocks are specified in DT and all the currently defined
parents are in fact valid parents of the display controller clock.
Signed-off-by: Thierry Reding <treding@nvidia.com>
remove space between function names and open parentheses as reported by
checkpatch.pl.
Signed-off-by: Auguste Olivry <auguste.olivry@ens.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to wait for all fences, not just the exclusive one.
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We somehow try to free the SG table twice.
Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=89734
Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When performing a modeset, use the framebuffer pitch value to set FIMD
IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the
distance between contiguous lines (bytes for FIMD, pixels for mixer).
Fixes display on Snow (1366x768).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Cintiq 13HD Touch is a new display tablet with pen and 10 finger touches.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Logitech T650 used to report 3 fingers swipes to the up as a press on the
Super key. When we switched the touchpad to the raw mode, we also disable such
firmware gesture and some users may rely on it.
Unfortunately, 3 finger swipes are still not supported in most of the Linux
environments, which means that we disabled a feature of the touchpad.
Allow users to revert the raw reporting mode and keep going with the firmware
gestures by providing a new module parameter.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The device exists with two device IDs instead of one as previously
believed.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
During a stress test these mice kept dropping and reappearing
in runlevel 1 as opposed to 5.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In wacom_bpt_pen, we checked touch_down before assigning new
stylus_in_proximity value. This would cause stylus_in_proximity not updated
properly if touch is down before pen is in proximity.
[jkosina@suse.cz: fix if-else style]
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Counting number of touching fingers by wacom_wac_finger_count_touches so we
don't have to count them inside individual routines.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The quirk was added for devices that support both pen and touch. It decides if
a device supports multiple inputs by hardcoded feature type. However, for some
devices, we do not know if they support both before accessing their HID
descriptors.
This patch relies on dynamically assigned device_type to make the decision.
Also, we make it certain that wacom_wac->shared is always created. That is, the
driver will not be loaded if it fails to create wacom_wac->shared.
Signed-off-by: Ping Cheng <pingc@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>