Commit graph

287,481 commits

Author SHA1 Message Date
Philipp Zabel
8f361b279f gpu: ipu-v3: turns out the IPU can only downsize 4:1
The value for downsizing 8:1 is marked as reserved in the technical reference
manual and the documentation states downsizing capability up to 4:1 only.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-03-31 12:03:55 +02:00
Philipp Zabel
f7089d923e gpu: ipu-v3: limit pixel clock divider to 8-bits
The DI pixel clock divider bit field is only 8 bits wide for the
integer part, so limit the divider to the 1...255 interval before
deciding whether the internal clock can be used and before writing
to the register.

Reported-by: Felix Mellmann <felix.mellmann@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-03-31 12:03:54 +02:00
Philipp Zabel
2872c8072a drm/imx: consolidate bus format variable names
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt,
and pixfmt variables to a common name "bus_format" wherever they describe the
pixel format on the bus between display controller and encoder hardware.
At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-03-31 11:59:34 +02:00
Philipp Zabel
a7c6e76fee drm/imx: switch to use media bus formats
imx-drm internally misused the V4L2_PIX_FMT constants, which are supposed to
describe the pixel format of frame buffers in memory, to describe the pixel
format on the bus between the display controller and the encoder hardware.
Now that MEDIA_BUS_FMT constants are available to drm drivers, use those
instead.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-03-31 11:59:34 +02:00
Philipp Zabel
e0d155cadb drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2
This patch allows the IPU to divide the 27 MHz input clock from
the TVE by two to obtain the 13.5 MHz pixel clock needed for
NTSC/PAL SD modes.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-03-31 11:59:32 +02:00
Philipp Zabel
dd7fa6d887 drm/imx: Add support for interlaced scanout
This patch allows interlaced frame buffer scanout for interlaced output
via HDMI or TV-Encoder.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-03-31 11:59:32 +02:00
Andrew Bresticker
a47eb351d2 CLK: Pistachio: Register external clock gates
Register the clock gates for the external audio and ethernet
reference clocks provided by the top-level general control block.

Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9321/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:59:31 +02:00
Andrew Bresticker
8cb94af684 CLK: Pistachio: Register system interface gate clocks
Register the system interface gate clocks provided by the peripheral
general control block.  These clocks gate register access for various
peripherals.

Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9322/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:59:24 +02:00
Andrew Bresticker
44960ab862 CLK: Pistachio: Register peripheral clocks
Register the clocks generated by the peripheral clock controller.
This includes the clocks for several peripherals, including I2C,
PWM, watchdog, and timer.

Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9320/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:59:17 +02:00
Andrew Bresticker
b35d7c3341 CLK: Pistachio: Register core clocks
Register the clocks generated by the core clock controller.
This includes the 7 PLLs and clocks for the CPU, RPU co-processor,
audio, WiFi, bluetooth, and several other peripherals.

The MIPS and PERIPH_SYS clocks must remain enabled at all times.

Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9317/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:59:10 +02:00
Andrew Bresticker
43049b0c83 CLK: Pistachio: Add PLL driver
Add a driver for the integer (GF40LP_LAINT) and fractional (GF40LP_FRAC)
PLLs present on Pistachio.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9316/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:59:04 +02:00
Andrew Bresticker
8e4b7721f6 CLK: Add basic infrastructure for Pistachio clocks
Add helpers for registering clocks and clock providers on Pistachio.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Cc: James Hartley <james.hartley@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Patchwork: https://patchwork.linux-mips.org/patch/9318/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-03-31 11:58:56 +02:00
Ingo Molnar
36cbf25dc7 * Fix integer overflow issue in the DMI SMBIOS 3.0 code when
calculating the number of DMI table entries - Jean Delvare
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVFVAYAAoJEC84WcCNIz1VPNYQAISdgO3dgFFo4k0SQQ6Bjpqa
 wQ6Y+nfsOQi6FyMYPO/Fjag8H++QQqvxI7V2p++Aj7kitICyNhzpdWlgP7+SScbJ
 XR6JUWG8UHlkL0pGjYEqIQ+X9D2xILCfO4gEFJ22gfQJwks3lXOfvBaah8Hfoj1Z
 WHjUR2E5MbmDcCC4/amyOV8EF1dnj30lYerW0Qhv9q/o4eq3h+znBb2muap7Ctng
 HvSWaK4ZGtdz+xMvDtqTzTBSSyA/6kaWH7fRhySGG1pSvZHVDvfIfAO9XVs4oKnX
 vIvhiCHATB2+PZML38U+/nvJZTicDgF6XeJyoMZeE3KEZ/UoYYzhv/DPI0rPIonk
 Za2kaiC9BfNsIMgEfh9jVpRrek/4t73FYAwpwnbNxzzklXWVeJcC8PcfPkuqHHin
 BMsBEH0vz/eI7aQ4HY7iail0TB278Z0FexRFUDKeQsNdXW5wcO1seNbkNPvTW01k
 xqHb4JMm2hyDUXRFqrncUr6362zV7s3eiIRnpoMcNK3ZD4gKkuCUHAoma+NimeLu
 3UMs+O/Qv1lzpg8JWScyKdwpVK4OrEeX20O/SeIR7XyGYw2fdksDKMB0l0y+hIdD
 +IDuH55ThaxqYGRhYtIQXck9LqR3rdrDZDQzwVr0iNS6U8zN5Zzs9ybXfKoZmjgk
 zI4ooTN/aNvkS98fD8y8
 =oUNN
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent

Pull EFI fix from Matt Fleming:

  - Fix integer overflow issue in the DMI SMBIOS 3.0 code when
    calculating the number of DMI table entries. (Jean Delvare)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 10:45:47 +02:00
Emil Velikov
066626d5d5 drm: line wrap DRM_IOCTL_DEF* macros
Improve the readability and keeps the lines shorter than 80 columns.

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-31 09:18:40 +02:00
Ben Dooks
4806c87f01 clocksource/drivers/at91: Fix IO endianness
Fix the use of __raw IO accessor with the readl/writel_relaxed()
versions to allow the code to be used on a system running in big
endian mode.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: digetx@gmail.com
Cc: hdegoede@redhat.com
Cc: laurent.pinchart+renesas@ideasonboard.com
Cc: maxime.ripard@free-electrons.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1427746633-9137-7-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:15:58 +02:00
Hans de Goede
37b8b003c4 clocksource/drivers/sun4i-timer: Only register a sched_clock on sun4i and sun5i
sun6i and newer have an arm arch timer which is a better
sched_clock source then the sun4i-timer, and sched_clock does
not have priorities, so do not register the sun4i-timer
sched_clock at all on sun6i and newer.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: ben.dooks@codethink.co.uk
Cc: digetx@gmail.com
Cc: laurent.pinchart+renesas@ideasonboard.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1427746633-9137-8-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:15:58 +02:00
Dmitry Osipenko
59196bcef5 clocksource/drivers/tegra: Fix IO endianness
Support big-endian kernel by using endian-aware register access
functions.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: ben.dooks@codethink.co.uk
Cc: hdegoede@redhat.com
Cc: laurent.pinchart+renesas@ideasonboard.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: maxime.ripard@free-electrons.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1427746633-9137-9-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:15:58 +02:00
Ben Dooks
3a10013b6a clocksource/drivers/dw_apb_timers_of: Fix IO endianness causing time jumps
The dw_apb_timer_of timer is using __raw_readl() to access the
timer register, which is causing issues when the system is
running in big endian mode. Fix this by using readl_relaxed()
which should account for the endian settings.

This fixes issues where the time jumps around in the dmesg
output due to returnling __le32 values.

For an example, these two console lines show time running
backwards:

[   49.882572] CPU1: failed to come online
[   43.282457] Brought up 1 CPUs

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Linux ARM Kernel <linux-arm-kernel@lists.infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: digetx@gmail.com
Cc: hdegoede@redhat.com
Cc: laurent.pinchart+renesas@ideasonboard.com
Cc: maxime.ripard@free-electrons.com
Cc: viresh.kumar@linaro.org
Link: http://lkml.kernel.org/r/1427746633-9137-10-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:15:57 +02:00
Viresh Kumar
ad834a3468 clocksource/drivers/efm32: Use CLOCK_EVT_FEAT_PERIODIC for defining features
We have used CLOCK_EVT_MODE_PERIODIC instead of
CLOCK_EVT_FEAT_PERIODIC while defining features. Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: ben.dooks@codethink.co.uk
Cc: digetx@gmail.com
Cc: hdegoede@redhat.com
Cc: laurent.pinchart+renesas@ideasonboard.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: maxime.ripard@free-electrons.com
Link: http://lkml.kernel.org/r/1427746633-9137-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:15:57 +02:00
Ingo Molnar
c5e77f5216 Linux 4.0-rc6
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVGHwjAAoJEHm+PkMAQRiG8rcIAJ6cEJ6mbqLpyz5XrGf4yNp0
 +wG/QlEpT8rgrxe9wSjB3lfW3kR2Pe69b9fVVCdiklygdkmva5vfmDrVGGzYfe3M
 QrFSSlMVBplvh6IiM/L1mVMtr3DSmCO23YZZ9R5b7FoEYatNHRpNWBCBpuXpd4aD
 sLuIvO3L/S7LqeOAFkkYWv6AuL9umicmjR8u+nsmCSRJom7At/aJ6R66WIp9vxho
 Rn7r6wcUk6B2Q/gYNjdSE8SIwdyKhuBGyvqQ9U9s6Btg9DQfM/b0vG5kw9hqeAq/
 9445jqVDP1whA2vz6GjnvltidxrqRvuDPBwzOnFmY5U+KZz4lS3x2mnWAAJ3xWs=
 =TqVJ
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc6' into timers/core, before applying new patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-03-31 09:08:13 +02:00
James Bottomley
11e52a699a enclosure: fix WARN_ON removing an adapter in multi-path devices
We have peculiar problems with multi-path and enclosures: physically, we know
each bay can only be occupied by a single disk device.  However in multi-path,
it appears we have many (because each path to the device appears in Linux as a
different kernel device).  We try to fix this by only having the last seen
device show up in the bay.

Sysfs gets very annoyed if we try to manipulate links when the kobject sysfs
directory (kobj.sd) doesn't exist and drops a huge WARN_ON which most users
panic and report an oops for.  This happens on a few path removal situations
and IBM reports seeing it when one of their multi-path adapters is removed.

Add a check to enclosure device removal for the existence the sysfs directory
containing both the forward and back links so that the remnants (if any) get
removed in either direction but no scary warnings are dumped.

Reported-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wen Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-03-31 08:53:36 +03:00
Tomeu Vizoso
358b615f58 PM / devfreq: tegra: Register governor on module init
So this driver builds as a module.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:15 +09:00
Tomeu Vizoso
34ed504008 PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitor
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:15 +09:00
Tomeu Vizoso
2da19b1a4d PM / devfreq: tegra: Set drvdata before enabling the irq
To avoid a race in which the interrupt will be handled before the
drvdata has been set up.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:14 +09:00
Tomeu Vizoso
5d498b463a PM / devfreq: tegra: remove operating-points
As the DT bindings don't have an operating-points property any more,
build the OPP table from the frequencies supported by the EMC clock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:14 +09:00
Tomeu Vizoso
c70eea739f PM / devfreq: tegra: Use clock rate constraints
Now that we have per-user clocks and the possibility to set constraints
in a clock, set a floor constraint on the EMC clock.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:13 +09:00
Tomeu Vizoso
11573e9132 PM / devfreq: tegra: Update to v5 of the submitted patches
There seemed to be some miscommunication and an old version of the
submitted patches was merged.

This commit updates the driver to v5, which had this changelog:

* Clarify the units of avg_dependency_threshold
* Remove unused references to platform_device
* Enable and disable interrupts on governor events
* Make sure we handle all interrupts for any of the devices we are sampling
* Move locking to be per-actmon-device

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
CC: Alex Frid <afrid@nvidia.com>
CC: Mikko Perttunen <mikko.perttunen@kapsi.fi>
[Added const to device ID by MyungJoo]
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31 13:17:03 +09:00
Dave Airlie
d7de390bff Merge branch 'drm-atmel-hlcdc-4.1-fixes' of git://github.com/bbrezillon/linux-at91 into drm-next
add PM fix.

* 'drm-atmel-hlcdc-4.1-fixes' of git://github.com/bbrezillon/linux-at91:
  drm: atmel-hlcdc: use appropriate enabled flag in suspend/resume
2015-03-31 13:38:01 +10:00
Dave Airlie
b1f389ecc2 Merge tag 'drm-amdkfd-next-2015-03-25' of git://people.freedesktop.org/~gabbayo/linux into drm-next
- Allow amdkfd to work with multiple kgd instances. This is in preparation for
  AMD's new open source kernel graphic driver (amdgpu), and for the new
  AMD APU, Carrizo.

- Convert timestamping to use 64bit time accessors

- Three other minor changes.

* tag 'drm-amdkfd-next-2015-03-25' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Add multiple kgd support
  drm/amdkfd: Convert timestamping to use 64bit time accessors
  drm/amdkfd: add debug prints for process teardown
  drm/amdkfd: Remove unused field from struct qcm_process_device
  drm/amdkfd: rename fence_wait_timeout
2015-03-31 13:36:25 +10:00
Masanari Iida
9cd5196ed2 mtd: ts5500_flash: Fix typo in MODULE_DESCRIPTION in ts5500_flash.c
This patch fixes a spelling typo in MODULE_DESCRIPTION in
ts5500_flash.c.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
[ Brian: fixed grammar in a spelling patch :) ]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 20:19:44 -07:00
Wei Yang
d74b9027a4 PCI: Consider additional PF's IOV BAR alignment in sizing and assigning
When sizing and assigning resources, we divide the resources into two
lists: the requested list and the additional list.  We don't consider the
alignment of additional VF(n) BAR space.

This is because the alignment required for the VF(n) BAR space is the size
of an individual VF BAR, not the size of the space for *all* VFs.  But we
want additional alignment to support partitioning on PowerNV.

Consider the additional IOV BAR alignment when sizing and assigning
resources.  When there is not enough system MMIO space to accomodate both
the requested list and the additional list, the PF's IOV BAR alignment will
not contribute to the bridge. When there is enough system MMIO space for
both lists, the additional alignment will contribute to the bridge.

The additional alignment is stored in the min_align of pci_dev_resource,
which is stored in the additional list by add_to_list() at the end of
pbus_size_mem(). The additional alignment is calculated in
pci_resource_alignment().  For an IOV BAR, we have arch dependent function
to get the alignment for different arch.

[bhelgaas: changelog, printk cast]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:37 +11:00
Wei Yang
978d2d6831 PCI: Add pcibios_iov_resource_alignment() interface
Per the SR-IOV spec r1.1, sec 3.3.14, the required alignment of a PF's IOV
BAR is the size of an individual VF BAR, and the size consumed is the
individual VF BAR size times NumVFs.

The PowerNV platform has additional alignment requirements to help support
its Partitionable Endpoint device isolation feature (see
Documentation/powerpc/pci_iov_resource_on_powernv.txt).

Add a pcibios_iov_resource_alignment() interface to allow platforms to
request additional alignment.

[bhelgaas: changelog, adapt to reworked pci_sriov_resource_alignment(),
drop "align" parameter]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
995df527f3 PCI: Add pcibios_sriov_enable() and pcibios_sriov_disable()
VFs are dynamically created when a driver enables them.  On some platforms,
like PowerNV, special resources are necessary to enable VFs.

Add platform hooks for enabling and disabling VFs.

Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
b07579c092 PCI: Export pci_iov_virtfn_bus() and pci_iov_virtfn_devfn()
On PowerNV, some resource reservation is needed for SR-IOV VFs that don't
exist at the bootup stage.  To do the match between resources and VFs, the
code need to get the VF's BDF in advance.

Rename virtfn_bus() and virtfn_devfn() to pci_iov_virtfn_bus() and
pci_iov_virtfn_devfn() and export them.

[bhelgaas: changelog, make "busnr" int]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
4449f07972 PCI: Calculate maximum number of buses required for VFs
An SR-IOV device can change its First VF Offset and VF Stride based on the
values of ARI Capable Hierarchy and NumVFs.  The number of buses required
for all VFs is determined by NumVFs, First VF Offset, and VF Stride (see
SR-IOV spec r1.1, sec 2.1.2).

Previously pci_iov_bus_range() computed how many buses would be required by
TotalVFs, but this was based on a single NumVFs value and may not have been
the maximum for all NumVFs configurations.

Iterate over all valid NumVFs and calculate the maximum number of bus
numbers that could ever be required for VFs of this device.

[bhelgaas: changelog, compute busnr of NumVFs, not TotalVFs, remove
kerenl-doc comment marker]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
f59dca27d2 PCI: Refresh First VF Offset and VF Stride when updating NumVFs
The First VF Offset and VF Stride fields depend on the NumVFs setting, so
refresh the cached fields in struct pci_sriov when updating NumVFs.  See
the SR-IOV spec r1.1, sec 3.3.9 and 3.3.10.

[bhelgaas: changelog, remove kernel-doc comment marker]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Bjorn Helgaas
c1fe1f96e3 PCI: Index IOV resources in the conventional style
Most of PCI uses "res = &dev->resource[i]", not "res = dev->resource + i".
Use that style in iov.c also.

No functional change.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:36 +11:00
Wei Yang
0e6c9122a6 PCI: Keep individual VF BAR size in struct pci_sriov
Currently we don't store the individual VF BAR size.  We calculate it when
needed by dividing the PF's IOV resource size (which contains space for
*all* the VFs) by total_VFs or by reading the BAR in the SR-IOV capability
again.

Keep the individual VF BAR size in struct pci_sriov.barsz[], add
pci_iov_resource_size() to retrieve it, and use that instead of doing the
division or reading the SR-IOV capability BAR.

[bhelgaas: rename to "barsz[]", simplify barsz[] index computation, remove
SR-IOV capability BAR sizing]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:35 +11:00
Wei Yang
e88ae01d2c PCI: Print PF SR-IOV resource that contains all VF(n) BAR space
When we size VF BAR0, VF BAR1, etc., from the SR-IOV Capability of a PF, we
learn the alignment requirement and amount of space consumed by a single
VF.  But when VFs are enabled, *each* of the NumVFs consumes that amount of
space, so the total size of the PF resource is "VF BAR size * NumVFs".

Add a printk of the total space consumed by the VFs corresponding to what
we already do for normal non-IOV BARs.

No functional change; new message only.

[bhelgaas: split out into its own patch]
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:35 +11:00
Bjorn Helgaas
68f8e9fa56 PCI: Print more info in sriov_enable() error message
If we don't have space for all the bus numbers required to enable VFs,
print the largest bus number required and the range available.

No functional change; improved error message only.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2015-03-31 13:02:35 +11:00
Graham Moore
d99d72829e mtd: denali: Disable sub-page writes in Denali NAND driver
The Denali Controller IP does not support sub-page writes.

Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:32:44 -07:00
Nicholas Mc Guire
e5860c18e6 mtd: pxa3xx_nand: cleanup wait_for_completion handling
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than assigning it to an incorrect type variable.

The variable used for handling the return of wait_for_cmpletion_timeout
was int but should be unsigned long, where it was not in use for
anything else and the return value in case of completion (>0) is not
used it was removed and wait_for_completion_timeout() used directly in
the if condition.

To make the timeout values a bit simpler to read and also handle all of
the corner cases correctly the declarations are moved to
msecs_to_jiffies().

The timeout declaration cleanup is just for readability

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:30:30 -07:00
Fabio Estevam
899b834a46 mtd: nand: gpmi: Check for scan_bbt() error
In case of scan_bbt() failure, we should better propagate it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:27:47 -07:00
Nicholas Mc Guire
706d5b2899 mtd: nand: gpmi: fixup return type of wait_for_completion_timeout
return type of wait_for_completion_timeout is unsigned long not int. The
return variable is renamed to reflect its use and the type adjusted to
unsigned long.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Huang Shijie <shijie.huang@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:12:55 -07:00
Nicholas Mc Guire
219a8d13dd mtd: fsl-quadspi: cleanup wait_for_completion return handling
return type of wait_for_completion_timeout is unsigned long not int, this
patch uses the return value of wait_for_completion_timeout in the condition
directly rather than adding a additional appropriately typed variable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Acked-by: Han Xu <han.xu@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:08:04 -07:00
Fabio Estevam
dc6525c61f mtd: fsl-quadspi: Print the error value
When displaying dev_err() messages it is useful to print the error value.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Han Xu <han.xu@freescale.com>
[Brian: fix up "can not" at the same time]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:03:33 -07:00
Dan Carpenter
35cc3337b6 mtd: cfi: clean up some indenting
These lines were all indented one tab more than they should be.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 18:01:04 -07:00
Dmitry Torokhov
271afb4c96 mtd: maps: sa1100-flash: remove incorrect __exit markups
Even if bus is not hot-pluggable, the devices can be unbound from the
driver via sysfs, so we should not be using __exit annotations on
remove() methods. The only exception is drivers registered with
platform_driver_probe() which specifically disables sysfs bind/unbind
attributes.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 17:50:40 -07:00
Christophe Leroy
318157ab1f mtd: replace CONFIG_8xx by CONFIG_PPC_8xx
Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as
communication co-processor

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

It looks like not many places still have that old CONFIG_8xx used,
so it is likely to be a good time to get rid of it completely ?

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 17:50:40 -07:00
Stefan Roese
62b57f4c14 mtd: fsmc_nand.c: Use default timings if none are provided in the dts
Without this patch the timings are all set to 0 if not specified in the dts.
With this patch the driver falls back to use the defaults that are already
present in the driver and are known to work okay for some (older) boards.

Tested on a custom SPEAr600 based board.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-30 17:49:07 -07:00