Commit graph

287,481 commits

Author SHA1 Message Date
Ander Conselvan de Oliveira
8a5c0bde54 drm/atomic: Clear crtcs, connectors and planes when clearing state
Users of the atomic state assume that if the pointer to a crtc, plane or
connector is not NULL in the respective object vector, than the state
for that object in *_states vector also won't be NULL. That assumption
was broken by drm_atomic_state_clear(), which would clear the state
pointer but leave the pointer to the object still set.

This fixes a NULL pointer dereference in i915 caused by the use of
drm_atomic_state_clear().

Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-30 11:39:30 +02:00
Ivan T. Ivanov
dc716bbf1d mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's
Some of the PMIC's could have specific regmap configuration
tables in future, so add specific compatible strings for known
PMIC's. Also print runtime detected chip revision information.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:07:08 +01:00
Krzysztof Kozlowski
c31e858b1a mfd: axp20x: Fix duplicate const for model names
Replace duplicated const keyword for 'axp20x_model_names' with proper
array of const pointers to const strings.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:07:03 +01:00
Aaro Koskinen
dfe514b67a mfd: menelaus: Use macro for magic number
Use macro to check a register bit.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:55 +01:00
Aaro Koskinen
1ea8684e1e mfd: menelaus: Drop support for SW controller VCORE
Drop support for SW controlled VCORE, nobody uses it.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:50 +01:00
Andy Shevchenko
aec9038ec9 mfd: lpc_ich: Sort IDs
This patch just sorts IDs in the table for better maintenance. There is no
functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:06:16 +01:00
Łukasz Stelmach
78c059c65a mfd: Fix a typo in Kconfig
Signed-off-by: Łukasz Stelmach <stlman@poczta.fm>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 10:05:07 +01:00
Marek Vasut
9374e7d2fd rtlwifi: rtl8192cu: Add new device ID
Add new ID for ASUS N10 WiFi dongle.

Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: John W. Linville <linville@tuxdriver.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:38:25 +03:00
Larry Finger
2f92b314f4 rtlwifi: rtl8192cu: Add new USB ID
USB ID 2001:330d is used for a D-Link DWA-131.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:37:38 +03:00
Tom Gundersen
6bab2e19c5 cfg80211: pass name_assign_type to rdev_add_virtual_intf()
This will expose in /sys whether the ifname of a device is set by
userspace or generated by the kernel. The latter kind (wlanX, etc)
is not deterministic, so userspace needs to rename these devices
to names that are guaranteed to stay the same between reboots. The
former, however should never be renamed, so userspace needs to be
able to reliably tell the difference.

Similar functionality was introduced for the rtnetlink core in
commit 5517750f05 ("net: rtnetlink - make create_link take name_assign_type")

Signed-off-by: Tom Gundersen <teg@jklm.no>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Arend van Spriel <arend@broadcom.com>
Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Cc: Hante Meuleman <meuleman@broadcom.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
[reformat changelog to fit 72 cols]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:36:17 +02:00
Zhaoyang Liu
4acaf048b1 mwifiex: recover from skb allocation failures during RX
This patch adds recovery mechanism for SDIO RX during SKB allocation
failures.
For allocation failures during multiport aggregation, we skip and drop RX
packets.
For single port read case, we will use preallocated card->mpa_rx.buf to
complete cmd53 read.
Now we terminate SDIO operations only upon cmd53 failures.

CC: James Cameron <quozl@laptop.org>
Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:34:51 +03:00
Avinash Patil
5ff46f7923 mwifiex: stop command path in suspend handler
Cancel all pending commands including scan commands and stop CAC
during cfg80211 suspend handler.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:34:49 +03:00
Dan Carpenter
2d7defb07b mwifiex: remove an unneede NULL check in mwifiex_init_adapter()
"adapter->sleep_cfm" is always non-NULL at this point.  Static checkers
complain that we already dereference it at the start of the function
when we do:

	skb_put(adapter->sleep_cfm, sizeof(struct mwifiex_opt_sleep_confirm));

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:33:42 +03:00
Maithili Hinge
2f5872b601 mwifiex: Fix issue in the SDIO reset path of mwifiex.
SDIO reset was not happening properly on mwifiex as cancel_work_sync
in mwifiex_sdio_remove used to kill the calling work function itself.
Due to this, the interface was not getting removed and card was not
getting added again. Reset work function has been made independent
of adapter variable and cancel_work_sync has been moved to cleanup
function.

Signed-off-by: Maithili Hinge <maithili@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:32:56 +03:00
Oleksij Rempel
eaa4059d56 ath9k: use REG_RMW and rmw buffer in ath9k_hw_def_set_gain
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:43 +03:00
Oleksij Rempel
b1c1a26461 ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_board_values
replace REG_WRITE to REG_RMW and place every thing in one
RMW buffer.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:40 +03:00
Oleksij Rempel
2dfc0247f0 ath9k: use REG_RMW and rmw buffer in ath9k_hw_4k_set_gain
it is possible to reduce time needed for this function
by rplacing REG_WRITE with REG_RMW (plus dummy 0) and putt all commands
in same buffer.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:39 +03:00
Oleksij Rempel
ad10e0d650 ath9k: ath9k_hw_4k_set_board_values: use rmw buffer
it will reduce exution time from 14ms to 2ms on ar9271

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:38 +03:00
Oleksij Rempel
2028523b6d ath9k: ath9k_hw_analog_shift_rmw: use REG_RMW
use REG_RMW in ath9k_hw_analog_shift_rmw.
It will double execution speed on usb bus.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:37 +03:00
Oleksij Rempel
18d6616f1b ath9k: ath9k_hw_4k_set_board_values: use rmw buffer
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:36 +03:00
Oleksij Rempel
7b37e0d4db ath9k: use rmw buffer in ath9k_hw_set_operating_mode and ath9k_hw_reset
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:35 +03:00
Oleksij Rempel
10e03ef6b4 ath9k: ath9k_hw_set_4k_power_cal_tabl: use rmw buffer
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:34 +03:00
Oleksij Rempel
3df5dd901d ath9k: write buffer related optimisation in ar5008_hw_set_channel_regs
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:33 +03:00
Oleksij Rempel
9830ba6c9a ath9k: ath9k_hw_loadnf: use REG_RMW
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:32 +03:00
Oleksij Rempel
9c05babd93 ath9k: use one shot read in ath9k_hw_update_mibstats
this will reduce some overhead on usb bus.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:31 +03:00
Oleksij Rempel
03822782e8 ath9k: ar9271_hw_pa_cal: use REG_READ_ARRAY
insted of reading each register separatly
and waste 4ms on each operation, we can
use one shot read.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:30 +03:00
Oleksij Rempel
a57cb45a0a ath9k: add new function ath9k_hw_read_array
REG_READ generate most overhead on usb bus. It send and read micro packages
and reduce usb bandwidth. To reduce this overhead we should read in batches.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:29 +03:00
Oleksij Rempel
d55ce0a6f9 ath9k: add multi_read to be compatible with ath9k_htc
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:27 +03:00
Oleksij Rempel
93442c85d2 ath9k: ar9271_hw_pa_cal: use RMW buffer
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:26 +03:00
Oleksij Rempel
0202a553f5 ath9k: ar9271_hw_pa_cal: use proper makroses.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:23 +03:00
Oleksij Rempel
8d1cbdef8a ath9k: ar9271_hw_pa_cal - use defs instead of magin numbers
This function uses mixed styles for register names/numbers which
is make harder reading and optimisation.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:20 +03:00
Oleksij Rempel
8badb50cfa ath9k_htc: add new WMI_REG_RMW_CMDID command
Since usb bus add extra delay on each request, a command
with read + write requests is too expensive. We can dramtically
reduce usb load by moving this command to firmware.

In my tests, this patch will reduce channel scan time
for about 5-10 seconds.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:31:18 +03:00
Taehee Yoo
e480e13448 rtlwifi: Change REG_CR+2 to MSR
I changed REG_CR+2 and (MSR) to MSR because MSR is defined as (REG_CR + 2).

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:30:07 +03:00
Stanislaw Gruszka
01fbd4ecff rt2800usb: check Autorun mode on FW load only once
Seems H/W report correctly firmware Autorun value only at initialization
stage. When we close interface and open it again, Autorun value is 0 and
we try to load firmware what kills the device. To fix clear
REQUIRE_FIRMWARE firmware flag, to do not load firmware again, once we
discover Autorun mode.

Reported-and-tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-30 11:29:16 +03:00
Emmanuel Grumbach
a818292952 mac80211: convert rssi_callback() to event_callback()
We will be able to add more events, such as MLME events and
others. The low level driver may be interested in knowing
about these events to dump firmware data upon failures, or
to change parameters in case connection attempts fail etc...

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30 10:17:09 +02:00
MyungJoo Ham
4b524f1218 PM / devfreq: correct misleading comment
_remove_devfreq() does not have @skip anymore after 3.16.
The comment for _remove_devfreq() has been updated correspondingly.

Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30 17:09:41 +09:00
Chanwoo Choi
6f240fbc47 PM / devfreq: event: Add const keyword for devfreq_event_ops structure
This patch adds the const keyword for devfreq_event_ops structure
because the ops of devfreq_event_desc structure should not be changed
after initialization.

Cc: Myungjoo Ham <myungjoo.ham@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30 17:09:41 +09:00
Josh Cartwright
4d54b0adfa mfd: qcom_rpm: Add support for IPQ8064
The IPQ8064 also includes an RPM following the same message structure as
other chips.  In addition, it supports a few new resource types to
support the NSS fabric clocks and the SMB208/SMB209 regulators found on
the reference boards.

Signed-off-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 08:19:58 +01:00
Johan Hovold
a77c50b44c mfd: core: Fix platform-device name collisions
Since commit 6e3f62f079 ("mfd: core: Fix platform-device id
generation") we honour PLATFORM_DEVID_AUTO and PLATFORM_DEVID_NONE when
registering mfd-devices.

Unfortunately, some mfd-drivers rely on the old behaviour of generating
platform-device ids by adding the cell id also to the special value of
PLATFORM_DEVID_NONE. The resulting platform ids are not only used to
generate device-unique names, but are also used instead of the cell id
to identify cells when probing subdevices.

These drivers should be updated to use PLATFORM_DEVID_AUTO, which would
also allow more than one device to be registered without resorting to
hacks (see for example wm831x), but lets fix the regression first by
partially reverting the above mentioned commit with respect to
PLATFORM_DEVID_NONE.

Fixes: 6e3f62f079 ("mfd: core: Fix platform-device id generation")
Cc: stable <stable@vger.kernel.org>	# v3.19
Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 08:19:57 +01:00
Andy Shevchenko
bafc1face2 mfd: intel_quark_i2c_gpio: Don't crash if !DMI
dmi_get_system_info() may return NULL either when CONFIG_DMI is not set or when
board has an old firmware. The patch prevents a crash and changes the default
frequency to be in align with older board.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Lee: Removed overt "sentinel" comment and extra lines]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-03-30 08:19:56 +01:00
Kalle Valo
23d6660d7f Merge mac80211-next into ath-next
Patch "ath10k: introduce basic tdls functionality" depends on this mac80211
patch:

c23e31cf7b mac80211: initialize rate control earlier for tdls station
2015-03-30 10:07:12 +03:00
Kalle Valo
69628cd065 * fix a memory leak: we leaked memory each time the module
was loaded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVGOp+AAoJEC0Llv5uNjIBtnUQALBt98Uf5dWzzb1Kzw0EMB6k
 FMR5sY85BZz9EwvTIm5ZE0ZyLjZF2p8qvxw1mc2OWmaS5HIGOCKWXRRn9LqYmD4P
 kUcYotBpbxvTQI7rNa7ENjo2yXwEC7MPWRJcgjQdUD0NxdIc00SPe/Y5upyOreDn
 NmToXwl3f4SAoe4e7/QtjbG3tj2hlsFmkfDjW0bdlJBfcl+ug69aHEFOlEv/LYfS
 WLlWdBcFWBUjnn90AFtw9vm1zoqPCw9ogKp8RPjuTdKcOEdt9t5jTQk4BJ5v4Zoz
 KE1E1LB97cc7RUxeSBzlC023Getd2nypVQJdFw18PD23vJVvHVQxqqWS8GTVmKZ5
 ybnuSJLLUlZ7s2QjI6vY6y42OTP4q4g/q6dpm1Hcl+WUl7mKdDFmnOnzSnhV6E1O
 yqj3inetRwYXHRCc4hCLXQz1CH5c4/qwJfXvonHHz3Xp/L214u1KVoRyPXlYQo05
 KdjjdAOIdMxApT2Qv+lOGd8U9KtPT8SJcbkM17rwoabD9mXYg5/3g1Db3e0uk3wj
 zmFpAbSSsUb0YNGSNbWk1Ya6kvuenXQdgQSphtK+zvlJ6A3FAnwAxlYOFaKvXQ/i
 0wrSsRbEDySIAcwwnxR2tCc4P0O4pl1OCJ2SmqBIxmiUJ6nzNtUptOd2H8FyCAF1
 ocv0i4LEKEPuRizSc0+Y
 =wIgU
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-for-kalle-2015-03-30' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes

* fix a memory leak: we leaked memory each time the module
was loaded.
2015-03-30 09:39:12 +03:00
Kalle Valo
53513c302f ath10k: bump up FW API to 5
Firmware 10.2.4.48-3 now supports management frames over HTT feature and has
ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX. But as 10.2.4 branch has conflicting HTT ids
patch "ath10k: add ATH10K_FW_IE_HTT_OP_VERSION" is needed to fix the issue.
Older ath10k versions don't have support that support and to maintain backwards
compatibility we need bump up the FW API to 5 not break older versions.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:22:59 +03:00
Rajkumar Manoharan
8348db2984 ath10k: add ATH10K_FW_IE_HTT_OP_VERSION
Target to host HTT messages are conflicting between 10.x and other
firmware revisions. By maintaining separate HTT T2H tables for each
firmware revisions (main, 10x and tlv) similar to WMI abstraction,
solves the conflicts. Add ATH10K_FW_IE_HTT_OP_VERSION so that the firmware can
advertise the HTT interface to ath10k.

This fix is needed to get management frames over HTT (ie.
ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX disabled) working with 10.2.4.48-2 firmware.
Otherwise there will be unknown htt events and nothing works:

[30087.438343] ath10k_pci 0000:02:00.0: htt event (19) not handled
[30087.448691] ath10k_pci 0000:02:00.0: htt event (19) not handled
[30149.032974] ath10k_pci 0000:02:00.0: htt event (19) not handled

If the firmware does not have ATH10K_FW_IE_HTT_OP_VERSION use the main HTT
interface. That way old firmware images will still work.

Cc: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:22:39 +03:00
Janusz Dziedzic
25c866190b ath10k: add WOW patterns support
Add patterns support for WOW.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:10:24 +03:00
Janusz Dziedzic
d4976104c6 ath10k: add WMI support for WOW patterns
Add WMI support for WOW patterns.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:10:15 +03:00
Janusz Dziedzic
5fd3ac3c36 ath10k: add WOW disconnect/magic-packet support
Add support for WOW disconnect and magic-packet.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:09:30 +03:00
Janusz Dziedzic
f5431e87ae ath10k: add WMI support for WOW
Add WMI support for WOW like enable,
wakeup events and host wakeup indication.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-03-30 09:09:22 +03:00
Liad Kaufman
90cb12372b iwlwifi: mvm: rs: fix comment indentation
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-30 08:58:10 +03:00
Alexander Bondar
963221bea4 iwlwifi: mvm: Clean up UMAC scan UIDs in the reset and drv_stop flows
In the reset flow, the driver cancels ongoing scan and sends scan
complete notification to mac80211. However it does not clean its UID.
Add cleaning scan UID for the ongoing scan. Loop over all other UIDs
to make sure there's nothing left there and warn if any is found.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-30 08:58:09 +03:00