Commit graph

287,481 commits

Author SHA1 Message Date
Geert Uytterhoeven
3dc1e68521 gpio: rcar: Add more register documentation
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26 10:19:10 +01:00
Geert Uytterhoeven
4d84b9e495 gpio: rcar: Use local variable gpio_chip in gpio_rcar_probe()
The existing variable gpio_chip already points to the gpiochip instance,
hence use it everywhere.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26 10:17:55 +01:00
Chris Wilson
832a3aad1e drm/i915: Keep ring->active_list and ring->requests_list consistent
If we retire requests last, we may use a later seqno and so clear
the requests lists without clearing the active list, leading to
confusion. Hence we should retire requests first for consistency with
the early return. The order used to be important as the lifecycle for
the object on the active list was determined by request->seqno. However,
the requests themselves are now reference counted removing the
constraint from the order of retirement.

Fixes regression from

commit 1b5a433a4d
Author: John Harrison <John.C.Harrison@Intel.com>
Date:   Mon Nov 24 18:49:42 2014 +0000

    drm/i915: Convert 'i915_seqno_passed' calls into 'i915_gem_request_completed
'

and a

	WARNING: CPU: 0 PID: 1383 at drivers/gpu/drm/i915/i915_gem_evict.c:279 i915_gem_evict_vm+0x10c/0x140()
	WARN_ON(!list_empty(&vm->active_list))

Identified by updating WATCH_LISTS:

	[drm:i915_verify_lists] *ERROR* blitter ring: active list not empty, but no requests
	WARNING: CPU: 0 PID: 681 at drivers/gpu/drm/i915/i915_gem.c:2751 i915_gem_retire_requests_ring+0x149/0x230()
	WARN_ON(i915_verify_lists(ring->dev))

Note that this is only a problem in evict_vm where the following happens
after a retire_request has cleaned out all requests, but not all active
bo:
- intel_ring_idle called from i915_gpu_idle notices that no requests are
  outstanding and immediately returns.
- i915_gem_retire_requests_ring called from i915_gem_retire_requests also
  immediately returns when there's no request, still leaving the bo on the
  active list.
- evict_vm hits the WARN_ON(!list_empty(&vm->active_list)) after evicting
  all active objects that there's still stuff left that shouldn't be
  there.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-03-26 11:05:54 +02:00
Michael Ellerman
df60f57684 Merge branch 'next-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc into test
Merge miscellaneous bits from benh. Fix a minor conflict with
OpalMessageType changing names to opal_msg_type.
2015-03-26 20:04:28 +11:00
Shobhit Kumar
e189ca56d9 gpio/crystalcove: Add additional GPIO for Panel control
Export PANEL_EN/DISABLE (offset 0x52) as additional GPIO. Needed
by display driver to enable the DSI panel on BYT platform where
the Panel EN/Disable control is routed thorugh CRC PMIC

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-26 09:09:17 +01:00
Emmanuel Grumbach
5dd9c68a85 iwlwifi: drop support for early versions of 8000
These early versions are no longer supported.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:15:36 +02:00
Luciano Coelho
cb2513bb71 iwlwifi: mvm: use debugfs_create_bool() for enable_scan_iteration_notif
There is no need to implement the enable_scan_iteration_notif handling
explicitly and there's no reason not to export the current value.  So
use debugfs_create_bool() instead.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:14:05 +02:00
Luciano Coelho
2250fd94c8 iwlwifi: mvm: add delay to scheduled scan
Add support for delaying the start of a scheduled scan (or a WoWLAN
net-detect scan).

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:11:38 +02:00
Eliad Peller
483f3ab175 iwlwifi: pcie: initialize trans_pcie->ref_count on configure()
ref_count is currently initialized on start_fw(). This causes
some issues in restart flow, as currently active references
(e.g. unclaimed command) will get cleared, resulting in
invalid reference accounting.

Move the ref_count initialization to the configure() trans op,
so it won't be re-initialized on restart.

Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:11:38 +02:00
David Spinadel
4ffb36505c iwlwifi: mvm: inform mac80211 about umac scans that was aborted by restart
In nic restart flow we inform mac80211 that scan was aborted, but it was
based only on scan_status which is not set by UMAC scan. Fix that.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:11:37 +02:00
Arik Nemtsov
939e4904e0 iwlwifi: mvm: remove d0i3 ref correctly during AP start
The AP_START d0i3 reference was never removed if the AP started correctly.
This has the unpleasant side-effect of preventing D0i3 on Android if the
WiFi hotspot was ever started on the device.

Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-26 09:11:36 +02:00
Yannick Guerrini
1318470d78 ps3: Fix trivial typos in comment and debug message
Change 'prosessor' to 'processor'
Change 'set_inteval' to 'set_interval'

Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-26 15:23:17 +11:00
Christoph Hellwig
e2e40f2c1e fs: move struct kiocb to fs.h
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-25 20:28:11 -04:00
Axel Lin
7a504c935e phy: samsung_usb2: Fixup samsung_usb2_phy_power_on/off paths
Ensure we have balanced clk_prepare_enable/clk_disable_unprepare calls if
.power_on or .power_off callbacks return error.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26 05:06:10 +05:30
Jaewon Kim
2be608561a phy: exynos5-usbdrd: Add to support for Exynos5433 SoC
This patch adds driver data to support for Exynos5433 SoC.
The Exynos5433 has one USB3.0 Host and USB3.0 DRD(Dual Role Device).
Exynos5433 is simplar to Eyxnos7 but Exynos5433 have
one more USB3.0 Host controller.

Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26 05:06:10 +05:30
Axel Lin
d89a7f69d6 phy: qcom-ufs: Catch devm_phy_create failure in ufs_qcom_phy_generic_probe
Current code does NULL test against return value of ufs_qcom_phy_generic_probe.
However, in the case of devm_phy_create() failure, ufs_qcom_phy_generic_probe
does not return NULL. Fix it.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26 05:06:09 +05:30
Axel Lin
080de5ba39 phy: stih41x-usb: Fixup stih41x_usb_phy_power_on failure path
If stih41x_usb_phy_power_on() fails, we need to call clk_disable_unprepare()
before return error. This is to ensure we have balanced clk_enable/disable
calls.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26 05:06:09 +05:30
Linus Torvalds
9c8e30d12d Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: numa: mark huge PTEs young when clearing NUMA hinting faults
  mm: numa: slow PTE scan rate if migration failures occur
  mm: numa: preserve PTE write permissions across a NUMA hinting fault
  mm: numa: group related processes based on VMA flags instead of page table flags
  hfsplus: fix B-tree corruption after insertion at position 0
  MAINTAINERS: add Jan as DMI/SMBIOS support maintainer
  fs/affs/file.c: unlock/release page on error
  mm/page_alloc.c: call kernel_map_pages in unset_migrateype_isolate
  mm/slub: fix lockups on PREEMPT && !SMP kernels
  mm/memory hotplug: postpone the reset of obsolete pgdat
  MAINTAINERS: correct rtc armada38x pattern entry
  mm/pagewalk.c: prevent positive return value of walk_page_test() from being passed to callers
  mm: fix anon_vma->degree underflow in anon_vma endless growing prevention
  drivers/rtc/rtc-mrst: fix suspend/resume
  aoe: update aoe maintainer information
2015-03-25 16:21:17 -07:00
Lars-Peter Clausen
ddd2a30d41 drivers/rtc/rtc-mrst: fix suspend/resume
The Moorestown RTC driver implements suspend and resume callbacks and
assigns them to the suspend and resume fields of the device_driver
struct.  These callbacks are never actually called by anything though.

Modify the driver to properly use dev_pm_ops so that the suspend and
resume functions are actually executed upon suspend/resume.

[akpm@linux-foundation.org: device_driver.name is const char *]
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-03-25 16:20:30 -07:00
Linus Torvalds
b8517e9830 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
 "A small collection of fixes that has been gathered over the last few
  weeks.  This contains:

   - A one-liner fix for NVMe, fixing a missing list_head init that
     could makes us oops on hitting recovery at load time.

   - Two small blk-mq fixes:
        - Fixup a bad goto jump on error handling.
        - Fix for oopsing if running out of reserved tags.

   - A memory leak fix for NBD.

   - Two small writeback fixes from Tejun, fixing a missing init to
     INITIAL_JIFFIES, and a possible underflow introduced recently.

   - A core merge fixup in sg gap detection, where rq->biotail was
     indexed with the count of rq->bio"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: fix possible underflow in write bandwidth calculation
  NVMe: Initialize device list head before starting
  Fix bug in blk_rq_merge_ok
  blkmq: Fix NULL pointer deref when all reserved tags in
  blk-mq: fix use of incorrect goto label in blk_mq_init_queue error path
  nbd: fix possible memory leak
  writeback: add missing INITIAL_JIFFIES init in global_update_bandwidth()
2015-03-25 15:40:21 -07:00
Michael Turquette
fe15dedc02 Allwinner clocks changes for 4.1
The usual round of clock changes for the Allwinner SoCs.
 
 There is nothing really standing out here, but a few changes and fixes, most
 notably to allow the AHB clock to be parented to a PLL, instead of the CPU
 clock to avoid any AHB rate change due to cpufreq.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVEyS7AAoJEBx+YmzsjxAgKRIP/3cn2AYWL25NGB2vd61hYQuK
 zHMHqqGyybr+8nxCd2ue4ztBLUTMZz3BA+siaYG7KzOUmSCpHZb6ic2RlqWGZMbX
 CmBW09YNiMtXvIaViYXH8ltVy/Ug8abwpRVkPjWf8jcbN9beGb34mrYstUBa4Cmh
 9clMaMTAvhD0KqmrlHGd/tgyXdZXZPriRLLbUbumF5gatXFpHK2EzJBQMqAzhPE+
 Qrn5xoDJMBziJ21cX/4MRnGWILgOy9EioW7TMhUvj7reZniHhkTBiSo/gu6qImTM
 izkO1GP5rAhVjfEbltvVPIKaFP2cFnxwVwq9sDkhE4cMwb9CWOXhM6vdEFRm9PAG
 nC/VVjLFaJ3lCyI+jYB5917d+U/F+RwrI07Zwx9+QLzNiyCh9y2DL+kKT6iyzYbY
 as4Jg4J2MrOk+WesGH49PAT/ciUqnViTMKMMcbu/0chMHIsN7L80h+gH9ktnAkN4
 1JmQfL2A85i2NORsb7SFM4P5Gc8c5cxnqbZ4honS4TxLW5CmXI9zISG53j/miBy9
 SRutVT6IGseMNhIrWgHxRVVQBpG3QasYZSVOVutK9IDrUJ8L0pgymb7VjtMaAKDK
 1dxfl6gdkUIJ1jfjD3ly57eMkikLDWc/ea3VgIUCQoBU8IVJuJuc/miWi0i3qnJo
 zkLzG1fR0OH+LHtFO42K
 =k3yP
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-clocks-for-4.1' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner clocks changes for 4.1

The usual round of clock changes for the Allwinner SoCs.

There is nothing really standing out here, but a few changes and fixes, most
notably to allow the AHB clock to be parented to a PLL, instead of the CPU
clock to avoid any AHB rate change due to cpufreq.
2015-03-25 14:51:40 -07:00
Dmitry Torokhov
22de3ef94b spi: of: do explicitly request modules for of-registered devices
Trying to register an SPI device asynchronously (via async_schedule() call)
results in an ugly complaint from request_module() warning about potential
deadlock (because request_module tries to wait for async works to
complete, the caller is also an async work in this case).

While we could try to switch to using request_module_nowait(), other buses,
as well as SPI itself when not using device tree, do not try to load
modules explicitly, but rather rely on the standard infrastructure (such as
udev) to execute module loading. There is no reason why SPI OF-described
devices should be treated differently.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-25 14:34:52 -07:00
Rafael J. Wysocki
9017f25254 driver core: Implement device property accessors through fwnode ones
Now that the ACPI companions of devices are pointed to by the fwnode
field in struct device, the device_property_*() accessor functions
can be modified to use their fwnode_property_*() counterparts
internally with minimum extra overhead in the IS_ENABLED(CONFIG_OF)
case, so make those changes.

This allows us to get rid of the rather ugly DEV_PROP_READ_ARRAY()
macro among other things.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25 21:00:09 +01:00
Rafael J. Wysocki
fe0a20a3ef Merge branch 'acpi-driver-core' into device-properties 2015-03-25 20:59:51 +01:00
Rafael J. Wysocki
f42712a92e driver core: property: Update fwnode_property_read_string_array()
Commit 5c0acf3b4f (driver core: Add comments about returning array
counts) forgot to update fwnode_property_read_string_array() along
the lines of device_property_read_string_array(), although it did
change the kerneldoc comment of it.  Fix that.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-25 20:59:09 +01:00
Andy Shevchenko
207cda93f0 spi: dw: fix crash on setup stage
The commit 1a7b7ee72c (spi: Ensure that CS line is in non-active state after
spi_setup()) introduces an unconditional call of spi_set_cs() before ->setup().
The dw_spi_set_cs() relies on that fact that ->setup() is already called, but
it doesn't now. This patch fixes the crash by adding an additional check to
dw_spi_set_cs().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-25 11:54:40 -07:00
Chen-Yu Tsai
f101796966 clk: sunxi: Add pll6 / 4 clock output to sun4i-a10-pll6
The pll6 has a /4 output that is used as an input to the ahb mux clock.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-25 11:46:41 -07:00
Chen-Yu Tsai
934fe5f48a clk: sunxi: Make divs clocks specify which output is the base factor clock
The current sunxi clock driver has the base factor clock of divs clocks
as the last clock output of the clock node. This makes it rather difficult
to add new outputs, such as fixed dividers, which were previously unknown.

This patch makes the divs clocks data structure specify which output is
the factor clock, and updates all current divs clocks accordingly.

We can then add new outputs after the factor clocks, at least not breaking
backward compatibility with regards to the devicetree bindings.

Also replace kzalloc with kcalloc in sunxi_divs_clk_setup().

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-03-25 11:46:32 -07:00
Hannes Frederic Sowa
b6a7719aed ipv4: hash net ptr into fragmentation bucket selection
As namespaces are sometimes used with overlapping ip address ranges,
we should also use the namespace as input to the hash to select the ip
fragmentation counter bucket.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25 14:07:04 -04:00
Azael Avalos
fb42d1f491 toshiba_acpi: Fix the enabling of the Special Functions
Some Toshiba laptops with the "Special Functions" feature enabled
fail to properly enable such feature unless a specific value is
used to enable the hotkey events.

This patch adds a new function called "*_enable_special_functions",
that simply makes a call to the HCI_HOTKEY_EVENT call, but this time
we are using a different parameter to make the "Special Functions"
mode work as expected.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-03-25 10:58:24 -07:00
Azael Avalos
a2b3471b5b toshiba_acpi: Use the Hotkey Event Type function for keymap choosing
With the previous patch adding support to "Hotkey Event Type", we can
now use the type to distinguish which keymap to use.

This patch changes the toshiba_acpi_setup_keyboard function to make
use of the hotkey event type to choose the correct keymap without the
need to use the DMI matching list.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-03-25 10:58:24 -07:00
Azael Avalos
56e6b35339 toshiba_acpi: Add Hotkey Event Type function and definitions
This patch adds support to query the "Hotkey Event Type" the system
supports.

There are two main event types (so far), 0x10 and 0x11, with the
first being all those laptops that have the old keyboard layout, and
the latter all those new laptops with the new keyboard layout.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-03-25 10:58:24 -07:00
Paul Gortmaker
f62a4ffd43 x86/wmi: delete unused wmi_data_lock mutex causing gcc warning
In commit bff431e49f ("ACPI: WMI: Add
ACPI-WMI mapping driver") this mutex was added, but the rest of the
final commit never actually made use of it, resulting in:

 In file included from include/linux/mutex.h:29:0,
                  from include/linux/kernfs.h:13,
                  from include/linux/sysfs.h:15,
                  from include/linux/kobject.h:21,
                  from include/linux/device.h:17,
                  from drivers/platform/x86/wmi.c:35:
 drivers/platform/x86/wmi.c:48:21: warning: ‘wmi_data_lock’ defined but not used [-Wunused-variable]
  static DEFINE_MUTEX(wmi_data_lock);
                      ^

A git grep shows no other instances/references to the wmi_data_lock.
Delete it, assuming that the mutex addition was just a leftover from
an earlier work in progress version of the change, since the original
dates from 2008.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2015-03-25 10:25:09 -07:00
Mika Kuoppala
6c826f3495 drm/i915: Add fault address to error state for gen8 and gen9
The faulting virtual address is >32bits and has been moved
to different registers. Add to error state and output upper
register first, in the same line for easy reconstruction of
the fault address.

v2: correct gen masking (Michel)
v3: s/TBL/TLB (Ville)

Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-25 18:23:44 +01:00
Tvrtko Ursulin
1d00dad56b drm/i915/skl: Fix up positive error code
It should have been negative since it is returned with ERR_PTR().

Introduced in new code commit:

   commit 50470bb011
   Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
   Date:   Mon Mar 23 11:10:36 2015 +0000

    drm/i915/skl: Support secondary (rotated) frame buffer mapping

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-25 18:23:43 +01:00
Jesse Barnes
c0f4042841 drm/i915: make unsupported fb modifier message DRM_DEBUG
Or users can just spam the log all they want.

Issue introduced in

commit 9a8f0a1290
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Feb 27 11:15:24 2015 +0000

    drm/i915/skl: Allow Y (and Yf) frame buffer creation

References: https://bugs.freedesktop.org/show_bug.cgi?id=89628
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-25 18:23:20 +01:00
Loic Poulain
eb17380972 Bluetooth: hci_uart: Add setup callback
Some Bluetooth controllers require initialization before being
used (vendor config, firmware download). Add possibility for a
HCI UART proto to implement this early init via the setup callback.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-25 17:31:58 +01:00
David Woodhouse
03ecc32c52 iommu/vt-d: support extended root and context entries
Add a new function iommu_context_addr() which takes care of the
differences and returns a pointer to a context entry which may be
in either format. The formats are binary compatible for all the old
fields anyway; the new one is just larger and some of the reserved
bits in the original 128 are now meaningful.

So far, nothing actually uses the new fields in the extended context
entry. Modulo hardware bugs with interpreting the new-style tables,
this should basically be a no-op.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-03-25 15:46:13 +00:00
Hariprasad Shenai
dde93dfea5 cxgb4: Fix frame size warning for 32 bit arch
Fixes below warning by dynamically allocating memory

All warnings:

   drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c: In function
   'cctrl_tbl_show':
   >> drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c:689:1: warning: the
   >> frame
   >> size of 1028 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25 11:45:29 -04:00
Lee Jones
a8381faca5 pinctrl: st: Display pin's function when printing pinctrl debug information
Great for easily determining which mode a pin is operating in.
This patch was particularly helpful when debugging a recent GPIO/
Pinctrl disparity issue.

Before:
    $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
      pin 33 (PIO4[1]):[OE:0,PU:0,OD:0]
             [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]

After [GPIO]:
    $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
      pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] GPIO
             [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]

After [Alt]:
    $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
      pin 33 (PIO4[1]):[OE:0,PU:0,OD:0] Alt Fn 2
             [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]

Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25 16:39:17 +01:00
Lee Jones
e2ed0e88ec pinctrl: st: Show correct pin direction also in GPIO mode
Until now ST's pinconf_dbg_show() call-back has displayed the PIO
alternate function direction, which is only relevant if a pin is
operating in an alternate function mode i.e not GPIO mode.  If a
pin is in GPIO mode its direction is both set and status is
obtained by a completely different/unrelated bunch of registers.

This change ensures that the correct pin direction is shown, even
if a pin is operating in GPIO mode.

Reported-by: Olivier Clergeaud <olivier.clergeaud@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25 16:38:06 +01:00
Lee Jones
1e702ec2aa pinctrl: st: Supply a GPIO get_direction() call-back
ST's hardware differentiates between GPIO mode and Pinctrl alternate
functions.  When a pin is in GPIO mode, there are dedicated registers
to set and obtain direction status.  However, If a pin's alternate
function is in use then the direction is set and status is derived
from a bunch of syscon registers.  The issue is; until now there was
a lack of parity between the two.

For example:

Catting the two following information sources could result in
conflicting information (output has been snipped for simplicity):

 $ cat /sys/kernel/debug/gpio
  GPIOs 32-39, platform/961f080.pin-controller-sbc, PIO4:
   gpio-33  (?                   ) out hi

 $ cat /sys/kernel/debug/pinctrl/<pin-controller>/pinconf-pins
  pin 33 (PIO4[1]):[OE:0,PU:0,OD:0]
         [retime:0,invclk:0,clknotdat:0,de:0,rt-clk:0,rt-delay:0]

In this example GPIO-33 is a GPIO controlled LED, which is set for
output, as you'd expect.  However, when the same information is
drafted from Pinctrl, it clearly states that OE (Output Enable) is
not set i.e. the pin is set for input.  This is because OE normally
only represents alternate functions and has no bearing on how the
pin operates when in Alt-0 (GPIO mode).

This patch changes the current semantics and provides a parity link
between the two subsystems.  The get_direction() call-back firstly
determines which function a pin is operating in, then uses the
appropriate helpers for that mode.

Reported-by: Olivier Clergeaud <olivier.clergeaud@st.com>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25 16:37:03 +01:00
David Woodhouse
18436afdc1 iommu/vt-d: Allow RMRR on graphics devices too
Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API
domains") prevents certain options for devices with RMRRs. This even
prevents those devices from getting a 1:1 mapping with 'iommu=pt',
because we don't have the code to handle *preserving* the RMRR regions
when moving the device between domains.

There's already an exclusion for USB devices, because we know the only
reason for RMRRs there is a misguided desire to keep legacy
keyboard/mouse emulation running in some theoretical OS which doesn't
have support for USB in its own right... but which *does* enable the
IOMMU.

Add an exclusion for graphics devices too, so that 'iommu=pt' works
there. We should be able to successfully assign graphics devices to
guests too, as long as the initial handling of stolen memory is
reconfigured appropriately. This has certainly worked in the past.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@vger.kernel.org
2015-03-25 15:36:35 +00:00
Lee Jones
f89e68fc3b pinctrl: st: Move st_get_pio_control() further up the source file
st_get_pio_control() will be used by subsequent calls which are
to be located above its original position.  This is required to
prevent the need for an unnecessary forward-declaration/prototype.

Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25 16:36:07 +01:00
Fenghua Yu
68c1b89cf5 iommu/vt-d: Print x2apic opt out info instead of printing a warning
BIOS can set up x2apic_opt_out bit on some platforms, for various misguided
reasons like insane SMM code with weird assumptions about what descriptors
look like, or wanting Windows not to enable the IOMMU so that the graphics
driver will take it over for SVM in "driver mode".

A user can either disable the x2apic_opt_out bit in BIOS or by kernel
parameter "no_x2apic_optout". Instead of printing a warning, we just
print information of x2apic opt out.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-03-25 15:35:19 +00:00
Lee Jones
c2a4bf4708 pinctrl: st: Introduce a 'get pin function' call
This call fetches the numerical function value a specified pin is
currently operating in.  Function zero is more often than not the
GPIO function.  Greater than zero values represent an alternative
function.  You'd need to either look those up in the Device Tree
sources or the Programmer's Manual.

Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-03-25 16:35:10 +01:00
Andy Shevchenko
9df461eca1 spi: pxa2xx: replace ugly table by approximation
The Quark SoC data sheet describes the baud rate setting using fractional
divider. The subset of possible values represented by a table suggests that the
divisor has one block that could divide by 5. This explains the number of the
beast in some cases in the table. Thus, in this particular case the divisor can
be evaluated as

	5^i * 2^j * 2 * k,

where

	i = [0, 1]
	j = [0, 23]
	k = [1, 256]

There are few cases as mentioned in the data sheet, i.e. better form of the
clock signal will be in case if DDS_CLK_RATE either 2^n or 2/5. It's also
possible to use any value that is less or equal to 0x33333 (1/5/16 = 1/80).

All three cases are compared to each other and the one that suits better is
chosen by the approximation algorithm. Anyone can play with the script [1] that
represents the algorithm.

[1] https://gist.github.com/06b084488b3629898121

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-25 08:30:17 -07:00
Oliver Neukum
b70b825802 HID: add quirk for PIXART OEM mouse used by HP
This mouse is also known under other IDs. It needs the quirk or will disconnect
in runlevel 1 or 3.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25 16:01:48 +01:00
Oliver Neukum
7a8e53c414 HID: add HP OEM mouse to quirk ALWAYS_POLL
This mouse needs QUIRK_ALWAYS_POLL.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-25 16:01:47 +01:00
Doug Goldstein
b229a0f840 USB: ftdi_sio: Use jtag quirk for SNAP Connect E10
This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order
to avoid attaching a TTY to the JTAG port as this board is based on the
CALAO Systems reference design and needs the same fix up.

Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
CC: stable <stable@vger.kernel.org>
[johan: clean up probe logic ]
Signed-off-by: Johan Hovold <johan@kernel.org>
2015-03-25 15:32:53 +01:00