Commit graph

287,481 commits

Author SHA1 Message Date
Eyal Shapira
57bff14850 iwlwifi: mvm: rs: fix BT Coex check to look at the correct ant
The check to avoid the shared antenna was passed the wrong
antenna parameter. It should have checked whether the antenna of
the next column we're considering is allowed and instead it was
passed the current antenna.
This could lead to a wrong choice of the next column in the rs
algorithm and non optimal performance.

Fixes: commit 219fb66b49 ("iwlwifi: mvm: rs - don't use the shared antenna when BT load is high")
CC: <stable@vger.kernel.org> [3.19]
Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-23 22:10:38 +02:00
Sathya Perla
f962f840f8 be2net: move be_func_init() call inside be_setup()
Every time be_setup() is called, the driver will have to wait for the
function/FW to be properly initialized. So, it make sense to move this call
inside be_setup().

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:32 -05:00
Kalesh AP
87ac1a5296 be2net: refactor adapter resource cleanup sequence into be_cleanup()
Most of the resource cleanup sequences performed in be_suspend(),
be_eeh_err_detected() and be_err_detection_task() are same. Moved the
common code to a new routine be_cleanup() to avoid code duplication.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:32 -05:00
Kalesh AP
484d76fd51 be2net: refactor adapter resource initialzation sequence into be_resume()
Most of the adapter initialisation sequences performed in be_resume(),
be_eeh_resume() and be_err_recover() are same. Renamed be_resume() to
be_pci_resume() and moved the common code to a new routine be_resume() to
avoid code duplication.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:32 -05:00
Sathya Perla
9fa465c0ce be2net: remove code duplication relating to Lancer reset sequence
The steps needed for Lancer's reset/initialization sequence are:
	a) wait for SLIPORT_STAUS RDY bit to be set
	b) set the SLIPORT_CONTROL IP bit
	c) repeat step "a"

The code needed for this sequence is already covered by the be_func_init()
routine (with minor modifications.) So, get rid of the
lancer_test_and_set_rdy_state() and lancer_provisioning_error() routines
that unnecessarily duplicate this code. Also fixed the error recovery
function to take care of these changes

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:32 -05:00
Kalesh AP
d0e1b319bb be2net: refactor error detect/recovery function
Currently when an error is detected, the queue resources are being cleaned up
in the recovery routine. The resources are better cleaned up in the error
detection routine itself (similar to EEH code.)
So, this patch re-factors error processing logic to follow the following sequence:
	- check if there is an error in adapter
	- if error,
		- cleanup resources
		- attempt recovery

The patch renames lancer_recover_func() to be_err_recover() as this
routine will be used in the future for error recovery on Skyhawk too.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:32 -05:00
Sathya Perla
eb7dd46c63 be2net: use a wrapper to schedule and cancel error detection task
Also rename func_recovery_work/task to err_detection_work/task as error
detection is the primary goal of this task while recovery is not guaranteed.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:31 -05:00
Sathya Perla
ca3de6b29d be2net: refactor function initalization sequence into be_func_init()
Function initialization sequence is executed in be_probe(), be_resume
and be_eeh_resume(). Move this code to a new routine called be_func_init()
to prevent code duplication.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:31 -05:00
Sathya Perla
6b085ba927 be2net: get rid of be_get_initial_config() call from be_probe()
Most of the code to fetch the adapter state is in be_setup()->be_get_config().
So, move the code from be_get_initial_config() to be_get_config().

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:31 -05:00
Sathya Perla
78fad34eb8 be2net: move adapter fields alloc/free code to new routines
The members of be_adapter struct were being allocated in two separate
routines -- be_ctrl_init() and be_stats_init(). Also, some other members
were allocated elsewhere. This patch moves the alloc/free code into
be_drv_init/cleanup() routines. The be_pci_map_bars() routine that was
called from be_ctrl_init() is now called directly from be_probe().
The new routine be_drv_init() will now be the place-holder for allocating
memory for any new be_adapter{} members in the future.
Some routines needed to be moved to provide forward definitions for their
calls.

Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-23 15:08:31 -05:00
Eyal Shapira
929e6edea5 iwlwifi: mvm: rs: better match tx response rate to the LQ table
Currently rs uses the info in mac80211 tx status which is
a translation of the actual rate coming up from the FW in
the tx response. This is matched up against the LQ table first
rate to make sure this tx frame used the current LQ table.
Instead of using the translated mac80211 info it's easier and
cleaner to just pass the actual tx response rate in the driver
private data and use that for matching.
This becomes even more important once the FW begins to
decide on its own whether to use STBC/BFER/SISO.

Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-23 22:08:07 +02:00
Luciano Coelho
54331db99a iwlwifi: mvm: call ieee80211_scan_completed() even if scan abort fails
A scan abort command failure is not that unusual, since we may try to
send it after the scan has actually completed but before we received
the completed notification from the firmware.  The scan abort can also
fail for other reasons, such as a timeout.  In such cases, we should
clear things up so the next scans will work again.  To do so, don't
return immediately in case of failures, but call
ieee80211_scan_completed() and clear the scan_status flags.

Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-23 22:07:29 +02:00
Mauro Carvalho Chehab
8a26a258bd [media] dvb core: only start media entity if not NULL
The logic there tries to start the media entity even if it
doesn't exist, causing this bug:

	[  314.356162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
	[  314.356202] IP: [<ffffffffa02ef74c>] media_entity_pipeline_start+0x1c/0x390 [media]

Reported-by: Gert-Jan van der Stroom <gjstroom@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-23 16:10:54 -03:00
Mauro Carvalho Chehab
99a85b901e Linux 34.0-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJU6pFJAAoJEHm+PkMAQRiG2OwH/24nDK+l9zkaRs0xJsVh+qiW
 8A2N1od0ickz43iMk48jfeWGkFOkd4izyvan/daJshJOE1Y5lCdSs7jq/OXVOv9L
 G0+KQUoC5NL0hqYKn1XJPFluNQ1yqMvrDwQt99grDGzruNGBbwHuBhAQmgzpj1nU
 do8KrGjr7ft1Rzm4mOAdET/ExWiF+mRSJSxxOv598HbsIRdM5wgn0hHjPlqDxmLN
 KH4r3YYEm0cHyjf4Krse0+YdhqdamRGJlmYxJgEsYNwCoMwkmHlLTc71diseUhrg
 r/VYIYQvpAA6Yvgw8rJ0N5gk/sJJig+WyyPhfQuc2bD5sbL9eO7mPnz2UP7z7ss=
 =vXB6
 -----END PGP SIGNATURE-----

Merge tag 'v4.0-rc1' into patchwork

Linux 34.0-rc1

* tag 'v4.0-rc1': (8947 commits)
  Linux 4.0-rc1
  autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
  procfs: fix race between symlink removals and traversals
  debugfs: leave freeing a symlink body until inode eviction
  Documentation/filesystems/Locking: ->get_sb() is long gone
  trylock_super(): replacement for grab_super_passive()
  fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
  SELinux: Use d_is_positive() rather than testing dentry->d_inode
  Smack: Use d_is_positive() rather than testing dentry->d_inode
  TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
  Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
  Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
  VFS: Split DCACHE_FILE_TYPE into regular and special types
  VFS: Add a fallthrough flag for marking virtual dentries
  VFS: Add a whiteout dentry type
  VFS: Introduce inode-getting helpers for layered/unioned fs environments
  kernel: make READ_ONCE() valid on const arguments
  blk-throttle: check stats_cpu before reading it from sysfs
  ...
2015-02-23 16:02:19 -03:00
Keith Busch
52b68d7ef8 NVMe: Fix for BLK_DEV_INTEGRITY not set
Need to define and use appropriate functions for when BLK_DEV_INTEGRITY
is not set.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-02-23 09:17:54 -08:00
Qiao Zhou
3a314f143d dmaenegine: mmp-pdma: fix irq handler overwrite physical chan issue
Some dma channels may be reserved for other purpose in other layer,
like secure driver in EL2/EL3. PDMA driver can see the interrupt
status, but it should not try to handle related interrupt, since it
doesn't belong to PDMA driver in kernel. These interrupts should be
handled by corresponding client/module.Otherwise, it will overwrite
illegal memory and cause unexpected issues, since pdma driver only
requests resources for pdma channels.

In PDMA driver, the reserved channels are at the end of total 32
channels. If we find interrupt bit index is not smaller than total
dma channels, we should ignore it.

Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-23 22:09:56 +05:30
Damien Lespiau
d0bbbc4faf drm/i915/skl: Implement WaDisablePowerCompilerClockGating
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:31:15 +01:00
Juergen Gross
facb5732b0 xen-scsiback: mark pvscsi frontend request consumed only after last read
A request in the ring buffer mustn't be read after it has been marked
as consumed. Otherwise it might already have been reused by the
frontend without violating the ring protocol.

To avoid inconsistencies in the backend only work on a private copy
of the request. This will ensure a malicious guest not being able to
bypass consistency checks of the backend by modifying an active
request.

Signed-off-by: Juergen Gross <jgross@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-02-23 16:30:25 +00:00
David Vrabel
fdfd811ddd x86/xen: allow privcmd hypercalls to be preempted
Hypercalls submitted by user space tools via the privcmd driver can
take a long time (potentially many 10s of seconds) if the hypercall
has many sub-operations.

A fully preemptible kernel may deschedule such as task in any upcall
called from a hypercall continuation.

However, in a kernel with voluntary or no preemption, hypercall
continuations in Xen allow event handlers to be run but the task
issuing the hypercall will not be descheduled until the hypercall is
complete and the ioctl returns to user space.  These long running
tasks may also trigger the kernel's soft lockup detection.

Add xen_preemptible_hcall_begin() and xen_preemptible_hcall_end() to
bracket hypercalls that may be preempted.  Use these in the privcmd
driver.

When returning from an upcall, call xen_maybe_preempt_hcall() which
adds a schedule point if if the current task was within a preemptible
hypercall.

Since _cond_resched() can move the task to a different CPU, clear and
set xen_in_preemptible_hcall around the call.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-02-23 16:30:24 +00:00
Liu Ying
d70e96ae05 DRM: i.MX: parallel display: Support probe deferral for finding DRM panel
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-02-23 17:19:25 +01:00
Philipp Zabel
51dac94e80 drm/imx: imx-ldb: enable DI clock in encoder_mode_set
Commit eb10d63555 ("imx-drm: encoder prepare/mode_set must use adjusted mode")
broke the first LVDS modeset by using crtc->hwmode before crtc mode_set is
called. In fact, encoder prepare is not supposed to prepare the display clock
at all. Rather encoder mode_set should be used to set the DI clock rate, before
it is enabled by crtc commit.

Reported-by: Liu Ying <Ying.Liu@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-02-23 17:19:01 +01:00
Philipp Zabel
6e8958ec0e drm/imx: dw_hdmi-imx: add end of array element to current control array
The loop iterating over curr_ctrl in dw_hdmi terminates on mpixelclock == ~0UL,
so there needs to be an end of list element here in case a mode with a pixel
clock larger than 216 MHz is set.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-02-23 17:19:01 +01:00
Philipp Zabel
081c80e85f drm/imx: dw_hdmi-imx: add mode_valid callback prune unsupported modes
This patch limits the pixel clock to 13.4 MHz - 266 MHz for i.MX6Q
and 13.5 MHz - 270 MHz for i.MX6DL, which is the range documented
in the HDMI Transmitter chapter of the respective reference manuals.

Without this patch, when connected to a monitor capable of 2160p60
modes, dw_hdmi will happily report this mode and the IPU code will
cause a division by zero in ipu_di_config_clock when trying to figure
out how to divide the 264 MHz HSP clock down to ~600 MHz.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-02-23 17:19:00 +01:00
Philipp Zabel
89ce4b0f4e gpu: ipu-v3: do not divide by zero if the pixel clock is too large
Even if an unsupported mode with a pixel clock larger than two times the
264 MHz IPU HSP clock is set, don't divide by zero.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-02-23 17:18:59 +01:00
Vijay Purushothaman
9505e01acd drm/i915: Limit max VCO supported in CHV to 6.48GHz
As per the recommendation from PHY team, limit the max vco supported in CHV to 6.48 GHz

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:12:13 +01:00
Vijay Purushothaman
d3eee4baa0 drm/i915: Add new PHY reg definitions for lock threshold
Added new PHY register definitions to control TDC buffer calibration and
digital lock threshold.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:10:51 +01:00
Chris Wilson
17cabf571e drm/i915: Trim the command parser allocations
Currently, the command parser tries to create a secondary batch exactly
as large as the original, and vmap both. This is open to abuse by
userspace using extremely large batch objects, but only executing very
short batches. For example, this would be if userspace were to implement
a command submission ringbuffer. However, we only need to allocate pages
for just the contents of the command sequence in the batch - all
relocations copied to the secondary batch will reference the original
batch and so there can be no access to the secondary batch outside of
the explicit execution region.

Testcase: igt/gem_exec_big #ivb,byt,hsw
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88308
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 17:07:40 +01:00
Goldwyn Rodrigues
1aee41f637 Add new disk to clustered array
Algorithm:
1. Node 1 issues mdadm --manage /dev/mdX --add /dev/sdYY which issues
   ioctl(ADD_NEW_DISC with disc.state set to MD_DISK_CLUSTER_ADD)
2. Node 1 sends NEWDISK with uuid and slot number
3. Other nodes issue kobject_uevent_env with uuid and slot number
(Steps 4,5 could be a udev rule)
4. In userspace, the node searches for the disk, perhaps
   using blkid -t SUB_UUID=""
5. Other nodes issue either of the following depending on whether the disk
   was found:
   ioctl(ADD_NEW_DISK with disc.state set to MD_DISK_CANDIDATE and
	 disc.number set to slot number)
   ioctl(CLUSTERED_DISK_NACK)
6. Other nodes drop lock on no-new-devs (CR) if device is found
7. Node 1 attempts EX lock on no-new-devs
8. If node 1 gets the lock, it sends METADATA_UPDATED after unmarking the disk
   as SpareLocal
9. If not (get no-new-dev lock), it fails the operation and sends METADATA_UPDATED
10. Other nodes understand if the device is added or not by reading the superblock again after receiving the METADATA_UPDATED message.

Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:07 -06:00
Goldwyn Rodrigues
7d49ffcfa3 Read from the first device when an area is resyncing
set choose_first true for cluster read in read balance when the area
is resyncing.

Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:07 -06:00
Goldwyn Rodrigues
589a1c4916 Suspend writes in RAID1 if within range
If there is a resync going on, all nodes must suspend writes to the
range. This is recorded in the suspend_info/suspend_list.

If there is an I/O within the ranges of any of the suspend_info,
should_suspend will return 1.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:07 -06:00
Goldwyn Rodrigues
e59721ccdc Resync start/Finish actions
When a RESYNC_START message arrives, the node removes the entry
with the current slot number and adds the range to the
suspend_list.

Simlarly, when a RESYNC_FINISHED message is received, node clears
entry with respect to the bitmap number.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:07 -06:00
Goldwyn Rodrigues
965400eb61 Send RESYNCING while performing resync start/stop
When a resync is initiated, RESYNCING message is sent to all active
nodes with the range (lo,hi). When the resync is over, a RESYNCING
message is sent with (0,0). A high sector value of zero indicates
that the resync is over.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
1d7e3e9611 Reload superblock if METADATA_UPDATED is received
Re-reads the devices by invalidating the cache.
Since we don't write to faulty devices, this is detected using
events recorded in the devices. If it is old as compared to the mddev
mark it is faulty.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
293467aa1f metadata_update sends message to other nodes
- request to send a message
   - make changes to superblock
   - send messages telling everyone that the superblock has changed
   - other nodes all read the superblock
   - other nodes all ack the messages
   - updating node release the "I'm sending a message" resource.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
601b515c5d Communication Framework: Sending functions
The sending part is split in two functions to make sure
atomicity of the operations, such as the MD superblock update.

Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
4664680c38 Communication Framework: Receiving
1. receive status

   sender                         receiver                   receiver
   ACK:CR                          ACK:CR                     ACK:CR

2. sender get EX of TOKEN
   sender get EX of MESSAGE
   sender                          receiver                   receiver
   TOKEN:EX                         ACK:CR                     ACK:CR
   MESSAGE:EX
   ACK:CR

3. sender write LVB.
   sender down-convert MESSAGE from EX to CR
   sender try to get EX of ACK
   [ wait until all receiver has *processed* the MESSAGE ]

                                     [ triggered by bast of ACK ]
                                     receiver get CR of MESSAGE
                                     receiver read LVB
                                     receiver processes the message
				     [ wait finish ]
                                     receiver release ACK

   sender                         receiver                   receiver
   TOKEN:EX                       MESSAGE:CR                 MESSAGE:CR
   MESSAGE:CR
   ACK:EX

4. sender down-convert ACK from EX to CR
   sender release MESSAGE
   sender release TOKEN
				  receiver upconvert to EX of MESSAGE
                                  receiver get CR of ACK
				  receiver release MESSAGE

   sender                        receiver                   receiver
   ACK:CR                         ACK:CR                     ACK:CR

Signed-off-by: Lidong Zhong <lzhong@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
4b26a08af9 Perform resync for cluster node failure
If bitmap_copy_slot returns hi>0, we need to perform resync.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:06 -06:00
Goldwyn Rodrigues
e94987db2e Initiate recovery on node failure
The DLM informs us in case of node failure with the DLM slot number.
cluster_info->recovery_map sets the bit corresponding to the slot number
and wakes up the recovery thread.

The recovery thread:
1. Derives the slot number from the recovery_map
2. Locks the bitmap corresponding to the slot
3. Copies the set bits to the node-local bitmap

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:05 -06:00
Goldwyn Rodrigues
11dd35daaa Copy set bits from another slot
bitmap_copy_from_slot reads the bitmap from the slot mentioned.
It then copies the set bits to the node local bitmap.

This is helper function for the resync operation on node failure.

bitmap_set_memory_bits() currently assumes it is only run at startup and that
they bitmap is currently empty.  So if it finds that a region is already
marked as dirty, it won't mark it dirty again. Change bitmap_set_memory_bits()
to always set the NEEDED_MASK bit if 'needed' is set.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:59:05 -06:00
Goldwyn Rodrigues
f9209a3235 bitmap_create returns bitmap pointer
This is done to have multiple bitmaps open at the same time.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
2015-02-23 09:57:57 -06:00
Dave Gordon
c32e3788ec drm/i915: FIFO space query code refactor
When querying the GTFIFOCTL register to check the FIFO space, the read value
must be masked. The operation is repeated explicitly in several places. This
change refactors the read-and-mask code into a function call.

v2: rebased on top of Mika's forcewake patch set, specifically:
	[PATCH 8/8] drm/i915: Enum forcewake domains and domain identifiers

Change-Id: Id1a9f3785cb20b82d4caa330c37b31e4e384a3ef
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-23 16:45:16 +01:00
Andrzej Pietrasiewicz
a0456399fb usb: gadget: configfs: don't NUL-terminate (sub)compatible ids
The "Extended Compat ID OS Feature Descriptor Specification" does not
require the (sub)compatible ids to be NUL-terminated, because they
are placed in a fixed-size buffer and only unused parts of it should
contain NULs. If the buffer is fully utilized, there is no place for NULs.

Consequently, the code which uses desc->ext_compat_id never expects the
data contained to be NUL terminated.

If the compatible id is stored after sub-compatible id, and the compatible
id is full length (8 bytes), the (useless) NUL terminator overwrites the
first byte of the sub-compatible id.

If the sub-compatible id is full length (8 bytes), the (useless) NUL
terminator ends up out of the buffer. The situation can happen in the RNDIS
function, where the buffer is a part of struct f_rndis_opts. The next
member of struct f_rndis_opts is a mutex, so its first byte gets
overwritten. The said byte is a part of a mutex'es member which contains
the information on whether the muext is locked or not. This can lead to a
deadlock, because, in a configfs-composed gadget when a function is linked
into a configuration with config_usb_cfg_link(), usb_get_function()
is called, which then calls rndis_alloc(), which tries locking the same
mutex and (wrongly) finds it already locked.

This patch eliminates NUL terminating of the (sub)compatible id.

Cc: <stable@vger.kernel.org> # v3.16+
Fixes: da4243145f: "usb: gadget: configfs: OS Extended Compatibility descriptors support"
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:37:27 -06:00
George Cherian
96e5d31244 usb: dwc3: dwc3-omap: Fix disable IRQ
In the wrapper the IRQ disable should be done by writing 1's to the
IRQ*_CLR register. Existing code is broken because it instead writes
zeros to IRQ*_SET register.

Fix this by adding functions dwc3_omap_write_irqmisc_clr() and
dwc3_omap_write_irq0_clr() which do the right thing.

Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: <stable@vger.kernel.org> # v3.2+
Signed-off-by: George Cherian <george.cherian@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:36:34 -06:00
Lad, Prabhakar
1f754ef103 usb: gadget: function: uvc_v4l2.c: fix sparse warnings
this patch fixes following sparse warnings:

uvc_v4l2.c:264:29: warning: symbol 'uvc_v4l2_ioctl_ops' was not declared. Should it be static?
uvc_v4l2.c:355:29: warning: symbol 'uvc_v4l2_fops' was not declared. Should it be static?

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:23:46 -06:00
Lad, Prabhakar
2b87cd24c3 usb: gadget: gadgetfs: fix sparse warnings
this patch fixes following sparse warnings:

g_ffs.c:136:3: warning: symbol 'gfs_configurations' was not declared. Should it be static?
g_ffs.c:281:16: warning: Using plain integer as NULL pointer

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:23:20 -06:00
Lad, Prabhakar
70685711f2 usb: gadget: function: uvc: fix sparse warnings
this patch fixes following sparse warnings:

uvc_video.c:283:5: warning: symbol 'uvcg_video_pump' was not declared. Should it be static?
uvc_video.c:342:5: warning: symbol 'uvcg_video_enable' was not declared. Should it be static?
uvc_video.c:381:5: warning: symbol 'uvcg_video_init' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:22:06 -06:00
Lad, Prabhakar
fcaddc5d7e usb: gadget: function: f_sourcesink: fix sparse warning
this patch fixes following sparse warnings:

f_sourcesink.c:347:34: warning: symbol 'ss_int_source_comp_desc' was not declared. Should it be static?
f_sourcesink.c:365:34: warning: symbol 'ss_int_sink_comp_desc' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:21:45 -06:00
Lad, Prabhakar
ef16e7c8ba usb: gadget: function: f_uac2: fix sparse warnings
this patch fixes following sparse warnings:
f_uac2.c:57:12: warning: symbol 'uac2_name' was not declared. Should it be static?
f_uac2.c:637:36: warning: symbol 'in_clk_src_desc' was not declared. Should it be static?
f_uac2.c:649:36: warning: symbol 'out_clk_src_desc' was not declared. Should it be static?
f_uac2.c:661:39: warning: symbol 'usb_out_it_desc' was not declared. Should it be static?
f_uac2.c:675:39: warning: symbol 'io_in_it_desc' was not declared. Should it be static?
f_uac2.c:689:40: warning: symbol 'usb_in_ot_desc' was not declared. Should it be static?
f_uac2.c:703:40: warning: symbol 'io_out_ot_desc' was not declared. Should it be static?
f_uac2.c:716:34: warning: symbol 'ac_hdr_desc' was not declared. Should it be static?
f_uac2.c:754:34: warning: symbol 'as_out_hdr_desc' was not declared. Should it be static?
f_uac2.c:767:38: warning: symbol 'as_out_fmt1_desc' was not declared. Should it be static?
f_uac2.c:775:32: warning: symbol 'fs_epout_desc' was not declared. Should it be static?
f_uac2.c:785:32: warning: symbol 'hs_epout_desc' was not declared. Should it be static?
f_uac2.c:831:34: warning: symbol 'as_in_hdr_desc' was not declared. Should it be static?
f_uac2.c:844:38: warning: symbol 'as_in_fmt1_desc' was not declared. Should it be static?
f_uac2.c:852:32: warning: symbol 'fs_epin_desc' was not declared. Should it be static?
f_uac2.c:862:32: warning: symbol 'hs_epin_desc' was not declared. Should it be static?
f_uac2.c:1566:21: warning: symbol 'afunc_alloc' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:21:28 -06:00
Lad, Prabhakar
7a3cc46184 usb: gadget: function: f_hid: fix sparse warning
this patch fixes following sparse warning:
f_hid.c:572:30: warning: symbol 'f_hidg_fops' was not declared. Should it be static?

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:21:22 -06:00
Nicholas Mc Guire
4d3db7d784 usb: isp1760: use msecs_to_jiffies for time conversion
This is only an API consolidation and should make things more readable
it replaces var * HZ / 1000 by msecs_to_jiffies(var).

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-02-23 09:18:20 -06:00