commit a722511b18 upstream.
DRM_MSM no longer needs DEVFREQ_GOV_SIMPLE_ONDEMAND (since commit
dbd7a2a941 ("PM / devfreq: Fix build issues with devfreq disabled")
in linux-next), so remove that select from the DRM_MSM Kconfig file.
Fixes: 6563f60f14 ("drm/msm/gpu: Add devfreq tuning debugfs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/523353/
Link: https://lore.kernel.org/r/20230220010428.16910-1-rdunlap@infradead.org
[rob: tweak commit message to make checkpatch.pl happy]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73dae652dc upstream.
Split resume into a 3rd step to handle displays when DCC is
enabled on DCN 4.0.1. Move display after the buffer funcs
have been re-enabled so that the GPU will do the move and
properly set the DCC metadata for DCN.
v2: fix fence irq resume ordering
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.11.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27906e5d78 upstream.
Stop printing the TT memory decryption status info each time tt is created
and instead print it just once.
Reduces the spam in the system logs when running guests with SEV enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 71ce046327 ("drm/ttm: Make sure the mapped tt pages are decrypted when needed")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20240408155605.1398631-1-zack.rusin@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71ce046327 upstream.
Some drivers require the mapped tt pages to be decrypted. In an ideal
world this would have been handled by the dma layer, but the TTM page
fault handling would have to be rewritten to able to do that.
A side-effect of the TTM page fault handling is using a dma allocation
per order (via ttm_pool_alloc_page) which makes it impossible to just
trivially use dma_mmap_attrs. As a result ttm has to be very careful
about trying to make its pgprot for the mapped tt pages match what
the dma layer thinks it is. At the ttm layer it's possible to
deduce the requirement to have tt pages decrypted by checking
whether coherent dma allocations have been requested and the system
is running with confidential computing technologies.
This approach isn't ideal but keeping TTM matching DMAs expectations
for the page properties is in general fragile, unfortunately proper
fix would require a rewrite of TTM's page fault handling.
Fixes vmwgfx with SEV enabled.
v2: Explicitly include cc_platform.h
v3: Use CC_ATTR_GUEST_MEM_ENCRYPT instead of CC_ATTR_MEM_ENCRYPT to
limit the scope to guests and log when memory decryption is enabled.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Fixes: 3bf3710e37 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/20230926040359.3040017-1-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Ye Li <ye.li@broadcom.com>
Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 25d7e84343.
The origin mainline patch fix a buffer overflow issue in
amdgpu_debugfs_gprwave_read(), but it has not been introduced in kernel
6.1 and older kernels. This patch add a check in a wrong function in the
same file.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b0ddf19cc upstream.
BIOS images may fail to load and null checks are added before they are
used.
This fixes 6 NULL_RETURNS issues reported by Coverity.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Keerthana K <keerthana.kalyanasundaram@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit afe260df55 ]
Under sriov, host driver will save and restore vf pci cfg space during
reset. And during device init, under sriov, pci_restore_state happens after
fullaccess released, and it can have race condition with mmio protection
enable from host side leading to missing interrupts.
So skip amdgpu_device_cache_pci_state for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32e7ee293f ]
Need to dereference the atcs acpi buffer after
the method is executed, otherwise it will result in
a memory leak.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b22f04833 ]
Port this change to vega20_ih.c:
commit afbf7955ff ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Original commit message:
"Why:
Setting IH_RB_WPTR register to 0 will not clear the RB_OVERFLOW bit
if RB_ENABLE is not set.
How to fix:
Set WPTR_OVERFLOW_CLEAR bit after RB_ENABLE bit is set.
The RB_ENABLE bit is required to be set, together with
WPTR_OVERFLOW_ENABLE bit so that setting WPTR_OVERFLOW_CLEAR bit
would clear the RB_OVERFLOW."
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2320c9e6a7 ]
drm_sched_job_init() has no control over how users allocate struct
drm_sched_job. Unfortunately, the function can also not set some struct
members such as job->sched.
This could theoretically lead to UB by users dereferencing the struct's
pointer members too early.
It is easier to debug such issues if these pointers are initialized to
NULL, so dereferencing them causes a NULL pointer exception.
Accordingly, drm_sched_entity_init() does precisely that and initializes
its struct with memset().
Initialize parameter "job" to 0 in drm_sched_job_init().
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021105028.19794-2-pstanner@redhat.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a500f3751d ]
GCC 15 enables -Werror=unterminated-string-initialization by default.
This results in the following build error
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c: In function ‘is_hdmi_adaptor’:
drivers/gpu/drm/display/drm_dp_dual_mode_helper.c:164:17: error: initializer-string for array of
‘char’ is too long [-Werror=unterminated-string-initialization]
164 | "DP-HDMI ADAPTOR\x04";
| ^~~~~~~~~~~~~~~~~~~~~
After discussion with Ville, the fix was to increase the size of
dp_dual_mode_hdmi_id array by one, so that it can accommodate the NULL
line character. This should let us build the kernel with GCC 15.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241002092311.942822-1-brahmajit.xyz@gmail.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1e2da6a50 ]
It is possible, although unlikely, that an integer overflow will occur
when the result of radeon_get_ib_value() is shifted to the left.
Avoid it by casting one of the operands to larger data type (u64).
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a16b5cdae ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-4-liaochen4@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e2ab24cd7 ]
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based
on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240902113320.903147-2-liaochen4@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 428656feb9 ]
Add quirk orientation for AYA NEO GEEK. The name appears without
spaces in DMI strings. The board name is completely different to
the previous models making it difficult to reuse their quirks
despite being the same resolution and using the same orientation.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/40350b0d63fe2b54e7cba1e14be50917203f0079.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7972d735c ]
Add quirk orientation for AYA NEO Founder. The name appears with spaces in
DMI strings as other devices of the brand. The panel is the same as the
NEXT and 2021 models. Those could not be reused as the former has VENDOR
name as "AYANEO" without spaces and the latter has "AYADEVICE".
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f71889a0b39f13f4b78481bd030377ca15035680.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 361ebf5ef8 ]
Add quirk orientation for AYA NEO 2. The name appears without spaces in
DMI strings. That made it difficult to reuse the 2021 match. Also the
display is larger in resolution.
Tested by the JELOS team that has been patching their own kernel for a
while now and confirmed by users in the AYA NEO and ChimeraOS discord
servers.
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2b35545b77a9fd8c9699b751ca282226dcecb1dd.1726492131.git.tjakobi@math.uni-bielefeld.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 014eccc9da ]
The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-7-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e5646178 ]
We regularly get dmesg error reports of:
[ 18.184066] hdmi-audio-codec hdmi-audio-codec.3.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -19
[ 18.184098] MAI: soc_pcm_open() failed (-19)
These are generated for any disconnected hdmi interface when pulseaudio
attempts to open the associated ALSA device (numerous times). Each open
generates a kernel error message, generating general log spam.
The error messages all come from _soc_pcm_ret in sound/soc/soc-pcm.c#L39
which suggests returning ENOTSUPP, rather that ENODEV will be quiet.
And indeed it is.
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-5-dave.stevenson@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f756dbac1c upstream.
Need to read back to make sure the write goes through.
Cc: David Belanger <david.belanger@amd.com>
Reviewed-by: Frank Min <frank.min@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6fa67d26d upstream.
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bb ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d49e77a97 upstream.
After receiving the response for an MST down request message, the
response should be accepted/parsed only if the response type matches
that of the request. Ensure this by checking if the request type code
stored both in the request and the reply match, dropping the reply in
case of a mismatch.
This fixes the topology detection for an MST hub, as described in the
Closes link below, where the hub sends an incorrect reply message after
a CLEAR_PAYLOAD_TABLE -> LINK_ADDRESS down request message sequence.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12804
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-3-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd2fccac61 upstream.
Fix the MST sideband message body length check, which must be at least 1
byte accounting for the message body CRC (aka message data CRC) at the
end of the message.
This fixes a case where an MST branch device returns a header with a
correct header CRC (indicating a correctly received body length), with
the body length being incorrectly set to 0. This will later lead to a
memory corruption in drm_dp_sideband_append_payload() and the following
errors in dmesg:
UBSAN: array-index-out-of-bounds in drivers/gpu/drm/display/drm_dp_mst_topology.c:786:25
index -1 is out of range for type 'u8 [48]'
Call Trace:
drm_dp_sideband_append_payload+0x33d/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
memcpy: detected field-spanning write (size 18446744073709551615) of single field "&msg->msg[msg->curlen]" at drivers/gpu/drm/display/drm_dp_mst_topology.c:791 (size 256)
Call Trace:
drm_dp_sideband_append_payload+0x324/0x350 [drm_display_helper]
drm_dp_get_one_sb_msg+0x3ce/0x5f0 [drm_display_helper]
drm_dp_mst_hpd_irq_handle_event+0xc8/0x1580 [drm_display_helper]
Cc: <stable@vger.kernel.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241125205314.1725887-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c98b10496b ]
On the Raspberry Pi 5, performance counters are not being cleared
when `v3d_perfmon_start()` is called, even though we write to the
CLR register. As a result, their values accumulate until they
overflow.
The expected behavior is for performance counters to reset to zero
at the start of a job. When the job finishes and the perfmon is
stopped, the counters should accurately reflect the values for that
specific job.
To ensure this behavior, the performance counters are now enabled
before being cleared. This allows the CLR register to function as
intended, zeroing the counter values when the job begins.
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241204122831.17015-1-mcanal@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5f3f21728 ]
The IT6505 bridge chip has a active low reset line. Since it is a
"reset" and not an "enable" line, the GPIO should be asserted to
put it in reset and deasserted to bring it out of reset during
the power on sequence.
The polarity was inverted when the driver was first introduced, likely
because the device family that was targeted had an inverting level
shifter on the reset line.
The MT8186 Corsola devices already have the IT6505 in their device tree,
but the whole display pipeline is actually disabled and won't be enabled
until some remaining issues are sorted out. The other known user is
the MT8183 Kukui / Jacuzzi family; their device trees currently do not
have the IT6505 included.
Fix the polarity in the driver while there are no actual users.
Fixes: b5c84a9edc ("drm/bridge: add it6505 driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029095411.657616-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8814444e62 ]
The spec of timing between IVDD/OVDD and SYSRTEN is 10ms, but SYSRSTN RC
circuit need at least 25ms for rising time, update for match spec
Signed-off-by: Kuro Chung <kuro.chung@ite.com.tw>
Signed-off-by: Hermes Wu <hermes.wu@ite.com.tw>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240604024405.1122488-1-kuro.chung@ite.com.tw
Stable-dep-of: c5f3f21728 ("drm/bridge: it6505: Fix inverted reset polarity")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4f8dbadef0 upstream.
The shader L1 cache is a writeback cache for shader loads/stores
and thus must be flushed before any BOs backing the shader buffers
are potentially freed.
Cc: stable@vger.kernel.org
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e965e771b0 upstream.
The return value of drm_atomic_get_crtc_state() needs to be
checked. To avoid use of error pointer 'crtc_state' in case
of the failure.
Cc: stable@vger.kernel.org
Fixes: dd86dc2f9a ("drm/sti: implement atomic_check for the planes")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Acked-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909063359.1197065-1-make24@iscas.ac.cn
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3718a619a8 upstream.
dcn32_enable_phantom_stream can return null, so returned value
must be checked before used.
This fixes 1 NULL_RETURNS issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Xiangyu: BP to fix CVE: CVE-2024-49897, modified the source path]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62ed6f0f19 upstream.
This commit adds a null check for the set_output_gamma function pointer
in the dcn20_set_output_transfer_func function. Previously,
set_output_gamma was being checked for null at line 1030, but then it
was being dereferenced without any null check at line 1048. This could
potentially lead to a null pointer dereference error if set_output_gamma
is null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a null check for set_output_gamma
before the call to set_output_gamma at line 1048.
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c395fd47d1 upstream.
This commit addresses a potential null pointer dereference issue in the
`dcn32_init_hw` function. The issue could occur when `dc->clk_mgr` is
null.
The fix adds a check to ensure `dc->clk_mgr` is not null before
accessing its functions. This prevents a potential null pointer
dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:961 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 782)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Xiangyu: BP to fix CVE: CVE-2024-49915, modified the source path]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cba7fec864 upstream.
This commit addresses a potential null pointer dereference issue in the
`dcn30_init_hw` function. The issue could occur when `dc->clk_mgr` or
`dc->clk_mgr->funcs` is null.
The fix adds a check to ensure `dc->clk_mgr` and `dc->clk_mgr->funcs` is
not null before accessing its functions. This prevents a potential null
pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:789 dcn30_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 628)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[Xiangyu: BP to fix CVE: CVE-2024-49917, modified the source path]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21cae8debc ]
In kfd_procfs_show(), the sdma_activity_work_handler is a local variable
and the sdma_activity_work_handler.sdma_activity_work should initialize
with INIT_WORK_ONSTACK() instead of INIT_WORK().
Fixes: 32cb59f313 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20c7b42d9d ]
There may be a potential integer overflow issue in
_dpu_core_perf_calc_clk(). crtc_clk is defined as u64, while
mode->vtotal, mode->hdisplay, and drm_mode_vrefresh(mode) are defined as
a smaller data type. The result of the calculation will be limited to
"int" in this case without correct casting. In screen with high
resolution and high refresh rate, integer overflow may happen.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: c33b7c0389 ("drm/msm/dpu: add support for clk and bw scaling for display")
Signed-off-by: Zichen Xie <zichenxie0106@gmail.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/622206/
Link: https://lore.kernel.org/r/20241029194209.23684-1-zichenxie0106@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37dc473744 ]
The perfmon sampling mutates shared GPU state (e.g. VIVS_HI_CLOCK_CONTROL
to select the pipe for the perf counter reads). To avoid clashing with
other functions mutating the same state (e.g. etnaviv_gpu_update_clock)
the perfmon sampling needs to hold the GPU lock.
Fixes: 68dc0b295d ("drm/etnaviv: use 'sync points' for performance monitor requests")
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61a6920bb6 ]
Older GC300 revisions have their power registers at an offset of 0x200
rather than 0x100. Add new gpu_read_power and gpu_write_power functions
to encapsulate accesses to the power addresses and fix the addresses.
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Stable-dep-of: 37dc473744 ("drm/etnaviv: hold GPU lock across perfmon sampling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13c96ac9a3 ]
Remove __GFP_HIGHMEM when requesting a page from DMA32 zone,
and since all vivante GPUs in the system will share the same
DMA constraints, move the check of whether to get a page from
DMA32 to etnaviv_bind().
Fixes: b72af445cd ("drm/etnaviv: request pages from DMA32 zone when needed")
Suggested-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f32ddd87e ]
There is a need to check the returned value of the registration function.
In case of returned error, print that and stop the init process.
Fixes: 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS constraints")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Patchwork: https://patchwork.freedesktop.org/patch/620336/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fadcc3ab13 ]
Change idle freq clamping back to the direct method, bypassing PM QoS
requests. The problem with using PM QoS requests is they call
(indirectly) the governors ->get_target_freq() which goes thru a
get_dev_status() cycle. The problem comes when the GPU becomes active
again and we remove the idle-clamp request, we go through another
get_dev_status() cycle for the period that the GPU has been idle, which
triggers the governor to lower the target freq excessively.
This partially reverts commit 7c0ffcd40b ("drm/msm/gpu: Respect PM QoS
constraints"), but preserves the use of boost QoS request, so that it
will continue to play nicely with other QoS requests such as a cooling
device. This also mostly undoes commit 78f815c1cf ("drm/msm: return the
average load over the polling period")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517785/
Link: https://lore.kernel.org/r/20230110231447.1939101-3-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Stable-dep-of: 8f32ddd87e ("drm/msm/gpu: Check the status of registration to PM QoS")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6563f60f14 ]
Make the handful of tuning knobs available visible via debugfs.
v2: select DEVFREQ_GOV_SIMPLE_ONDEMAND because for some reason
struct devfreq_simple_ondemand_data depends on this
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/517784/
Link: https://lore.kernel.org/r/20230110231447.1939101-2-robdclark@gmail.com
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Stable-dep-of: 8f32ddd87e ("drm/msm/gpu: Check the status of registration to PM QoS")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 394679f322 ]
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Patchwork: https://patchwork.freedesktop.org/patch/614075/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffcde9e44d ]
The PIXCLK needs to be enabled in SCFG before accessing certain DCU
registers, or the access will hang. For simplicity, the PIXCLK is enabled
unconditionally, resulting in increased power consumption.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Fixes: 109eee2f2a ("drm/layerscape: Add Freescale DCU DRM driver")
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926055552.1632448-2-alexander.stein@ew.tq-group.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
