[ Upstream commit fff7586988 ]
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes: 7835303982 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit 50490ce05b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18feaf6d07 ]
HF-VSDB/SCDB has bits to advertise support for 16, 12 and 10 bpc.
If none of the bits are set, the minimum bpc supported with DSC is 8.
This patch corrects the min bpc supported to be 8, instead of 0.
Fixes: 76ee7b9056 ("drm/edid: Parse DSC1.2 cap fields from HFVSDB block")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2: s/DSC1.2/DSC 1.2
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916100551.2531750-2-ankit.k.nautiyal@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d37c120b73 ]
While the interface for the MMU mapping takes phys_addr_t to hold a
full 64bit address when necessary and MMUv2 is able to map physical
addresses with up to 40bit, etnaviv_iommu_map() truncates the address
to 32bits. Fix this by using the correct type.
Fixes: 931e97f3af ("drm/etnaviv: mmuv2: support 40 bit phys address")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d5a1224aa6 upstream.
The UNSLICE_UNIT_LEVEL_CLKGATE register programmed by this workaround
has 'BUS' style reset, indicating that it does not lose its value on
engine resets. Furthermore, this register is part of the GT forcewake
domain rather than the RENDER domain, so it should not be impacted by
RCS engine resets. As such, we should implement this on the GT
workaround list rather than an engine list.
Bspec: 19219
Fixes: 3551ff9287 ("drm/i915/gen11: Moving WAs to rcs_engine_wa_init()")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230201222831.608281-2-matthew.d.roper@intel.com
(cherry picked from commit 5f21dc07b5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b77b16de7 upstream.
YUV images can either be presented as one allocation with offsets
for the different planes, or multiple allocations with 0 offsets.
The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane
index 0, therefore any application using the second approach was
incorrectly rendered.
Correctly determine the address for each plane, removing the
assumption that the base address is the same for each.
Fixes: fc04023faf ("drm/vc4: Add support for YUV planes.")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127155708.454704-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 247a631f9c upstream.
The formula that determines the core clock requirement based on pixel
clock and blanking has been determined experimentally to minimise the
clock while supporting all modes we've seen.
A new reduced blanking mode (4kp60 at 533MHz rather than the standard
594MHz) has been seen that doesn't produce a high enough clock and
results in "flip_done timed out" error.
Increase the setup cost in the formula to make this work. The result is
a reduced blanking mode increases by up to 7MHz while leaving the
standard timing
mode untouched
Link: https://github.com/raspberrypi/linux/issues/4446
Fixes: 16e101051f ("drm/vc4: Increase the core clock based on HVS load")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127145558.446123-1-maxime@cerno.tech
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a950b989ea upstream.
v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.
It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.
Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.
Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org
(cherry picked from commit 9ef8d83e8e)
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a6897921f upstream.
ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.
After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.
Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a058 ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org
(cherry picked from commit 36d421e632)
Cc: <stable@vger.kernel.org> # v5.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a00299e74 upstream.
[Why]
drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.
[How]
Bail out of atomic check if normalize_zpos() returns an error.
Fixes: b261509952 ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f32378986 upstream.
Freeing memory was warned during suspend.
Move the self test out of suspend.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825
Cc: jfalempe@redhat.com
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb2ff6c27b upstream.
CONFIG_DRM_USE_DYNAMIC_DEBUG breaks debug prints for (at least modular)
drm drivers. The debug prints can be reinstated by manually frobbing
/sys/module/drm/parameters/debug after the fact, but at that point the
damage is done and all debugs from driver probe are lost. This makes
drivers totally undebuggable.
There's a more complete fix in progress [1], with further details, but
we need this fixed in stable kernels. Mark the feature as broken and
disable it by default, with hopes distros follow suit and disable it as
well.
[1] https://lore.kernel.org/r/20230125203743.564009-1-jim.cromie@gmail.com
Fixes: 84ec67288c ("drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro")
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Jim Cromie <jim.cromie@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230207143337.2126678-1-jani.nikula@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6fc547a5a2 ]
There could be boards with DCN listed in IP discovery, but no
display hardware actually wired up. In this case the vbios
display table will not be populated. Detect this case and
skip loading DM when we detect it.
v2: Mark DCN as harvested as well so other display checks
elsewhere in the driver are handled properly.
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 154711aa57 ]
[Why]
Otherwise we can be out of sync with what's in the hardware, leading
to us rerunning every command that's presently in the ringbuffer.
[How]
Reset software state for the mailboxes in hw_reset callback.
This is already done as part of the mailbox init in hw_init, but we
do need to remember to reset the last cached wptr value as well here.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 275d8a1db2 ]
[Why]
The hwss function does_plane_fit_in_mall not applicable to dcn3.2 asics.
Using it with dcn3.2 can result in undefined behaviour.
[How]
Assign the function pointer to NULL.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd2db2dc4b ]
[Why]
Lower max_downscale_ratio and ARGB888 downscale factor
to prevent cases where underflow may occur on dcn314
[How]
Set max_downscale_ratio to 400 and ARGB downscale factor
to 250 for dcn314
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea062fd28f ]
[Why]
Brackets missing in the calculation for MIN_DST_Y_NEXT_START
[How]
Add missing brackets for this calculation
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Daniel Miess <Daniel.Miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d22915d22d ]
Starting from Turing, the driver is no longer responsible for initiating
DEVINIT when required as the GPU started loading a FW image from ROM and
executing DEVINIT itself after power-on.
However - we apparently still need to wait for it to complete.
This should correct some issues with runpm on some systems, where we get
control of the HW before it's been fully reinitialised after resume from
suspend.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130223715.1831509-1-bskeggs@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 44e4c5684f upstream.
Obj flags for shmem objects is not being set correctly. Fixes in setting
BO_ALLOC_USER flag which applies to shmem objs as well.
v2: Add fixes tag (Tvrtko, Matt A)
Fixes: 13d29c8237 ("drm/i915/ehl: unconditionally flush the pages on acquire")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
[tursulin: Grouped all tags together.]
Link: https://patchwork.freedesktop.org/patch/msgid/20230203135205.4051149-1-aravind.iddamsetty@intel.com
(cherry picked from commit bca0d1d3ce)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 251e8c5b1b upstream.
Because eb_composite_fence_create() drops the fence_array reference
after creation of the sync_file, only the sync_file holds a ref to the
fence. But fd_install() makes that reference visable to userspace, so
it must be the last thing we do with the fence.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 00dae4d3d3 ("drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4)")
Cc: <stable@vger.kernel.org> # v5.15+
[tursulin: Added stable tag.]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203164937.4035503-1-robdclark@gmail.com
(cherry picked from commit 960dafa304)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49d0555976 upstream.
Cursor gets clipped off in the middle of the screen with hw rotation
180. Fix a miscalculation of cursor offset when it's placed near the
edges in the pipe split case.
Cursor bugs with hw rotation were reported on AMD issue tracker:
https://gitlab.freedesktop.org/drm/amd/-/issues/2247
The issues on rotation 270 was fixed by:
https://lore.kernel.org/amd-gfx/20221118125935.4013669-22-Brian.Chang@amd.com/
that partially addressed the rotation 180 too. So, this patch is the
final bits for rotation 180.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 9d84c7ef8a ("drm/amd/display: Correct cursor position on horizontal mirror")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c4e8c71d1 upstream.
Take into account whether or not the AGP aperture is
enabled or not when calculating the system aperture.
Fixes white screens with DCN 3.1.4.
Based on a patch from Yifan Zhang <yifan1.zhang@amd.com>
Cc: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6ac406cd8 upstream.
sriov does not need to init pptable from amdgpu driver
we finish it from PF
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ad7bbf3db upstream.
Currently amdgpu calls drm_sched_fini() from the fence driver sw fini
routine - such function is expected to be called only after the
respective init function - drm_sched_init() - was executed successfully.
Happens that we faced a driver probe failure in the Steam Deck
recently, and the function drm_sched_fini() was called even without
its counter-part had been previously called, causing the following oops:
amdgpu: probe of 0000:04:00.0 failed with error -110
BUG: kernel NULL pointer dereference, address: 0000000000000090
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 609 Comm: systemd-udevd Not tainted 6.2.0-rc3-gpiccoli #338
Hardware name: Valve Jupiter/Jupiter, BIOS F7A0113 11/04/2022
RIP: 0010:drm_sched_fini+0x84/0xa0 [gpu_sched]
[...]
Call Trace:
<TASK>
amdgpu_fence_driver_sw_fini+0xc8/0xd0 [amdgpu]
amdgpu_device_fini_sw+0x2b/0x3b0 [amdgpu]
amdgpu_driver_release_kms+0x16/0x30 [amdgpu]
devm_drm_dev_init_release+0x49/0x70
[...]
To prevent that, check if the drm_sched was properly initialized for a
given ring before calling its fini counter-part.
Notice ideally we'd use sched.ready for that; such field is set as the latest
thing on drm_sched_init(). But amdgpu seems to "override" the meaning of such
field - in the above oops for example, it was a GFX ring causing the crash, and
the sched.ready field was set to true in the ring init routine, regardless of
the state of the DRM scheduler. Hence, we ended-up using sched.ops as per
Christian's suggestion [0], and also removed the no_scheduler check [1].
[0] https://lore.kernel.org/amd-gfx/984ee981-2906-0eaf-ccec-9f80975cb136@amd.com/
[1] https://lore.kernel.org/amd-gfx/cd0e2994-f85f-d837-609f-7056d5fb7231@amd.com/
Fixes: 067f44c8b4 ("drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)")
Suggested-by: Christian König <christian.koenig@amd.com>
Cc: Guchun Chen <guchun.chen@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc38b996db upstream.
This can suppress the warning caused by version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c108a18462 upstream.
These can support unique_id, so create the sysfs file for them
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9874cc2df4 upstream.
This can suppress the warning caused by version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e53448e0a1 upstream.
The pid field corresponds to the result of gettid() in userspace.
However, userspace cannot reliably attribute PTE events to processes
with just the thread id. This patch allows userspace to easily
attribute PTE update events to specific processes by comparing this
field with the result of getpid().
For attributing events to specific threads, the thread id is also
contained in the common fields of each trace event.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8f20660f05 ]
An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned
to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to
retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1,
making the retry attempt fail at sync_file_get_fence().
The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the
passed value for exbuf->fence_fd when returning anything besides a
successful result from the ioctl.
Fixes: 2cd7b6f08b ("drm/virtio: add in/out fence support for explicit synchronization")
Signed-off-by: Ryan Neph <ryanneph@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203233345.2477767-1-ryanneph@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90d5e8301a ]
Due to a workaround we have to make sure the WM1 watermarks block/lines
values are sensible even when WM1 is disabled. To that end we copy those
values from WM0.
However since we now keep each wm level enabled on a per-plane basis
it doesn't seem necessary to do that copy when we already have an
enabled WM1 on the current plane. That is, we might be in a situation
where another plane can only do WM0 (and thus needs the copy) but
the current plane's WM1 is still perfectly valid (ie. fits into the
current DDB allocation).
Skipping the copy could avoid reprogramming the plane's registers
needlessly in some cases.
Fixes: a301cb0fca ("drm/i915: Keep plane watermarks enabled more aggressively")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131002127.29305-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit c580c2d27a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed8e793c65 upstream.
SQ_WAVE_INST_DW0 isn't present on gfx11 compared to gfx10, so update
wave data type to signify a difference.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1538709c9f upstream.
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5048fa1ebf upstream.
A mistake has been made on some boards with NBIO 4.3.0 where some
NBIO registers aren't properly set by the hardware.
Ensure that they're set during initialization.
Cc: Natikar Basavaraj <Basavaraj.Natikar@amd.com>
Tested-by: Satyanarayana ReddyTVN <Satyanarayana.ReddyTVN@amd.com>
Tested-by: Rutvij Gajjar <Rutvij.Gajjar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7057a8f126 upstream.
A userspace with multiple threads racing I915_GEM_SET_TILING to set the
tiling to I915_TILING_NONE could trigger a double free of the bit_17
bitmask. (Or conversely leak memory on the transition to tiled.) Move
allocation/free'ing of the bitmask within the section protected by the
obj lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Cc: <stable@vger.kernel.org> # v5.5+
[tursulin: Correct fixes tag and added cc stable.]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127200550.3531984-1-robdclark@gmail.com
(cherry picked from commit 10e0cbaaf1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41d419382e upstream.
Adding the vm to the vm_xa table makes it visible to userspace, which
could try to race with us to close the vm. So we need to take our extra
reference before putting it in the table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Fixes: 9ec8795e7d ("drm/i915: Drop __rcu from gem_context->vm")
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119173321.2825472-1-robdclark@gmail.com
(cherry picked from commit 99343c46d4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b06955324 ]
[Why&How]
Switching between certain modes that are freesync video modes and those
are not freesync video modes result in timing not changing as seen by
the monitor due to incorrect timing being driven.
The issue is fixed by ensuring that when a non freesync video mode is
set, we reset the freesync status on the crtc.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3ee9e0b57 ]
The unprepare sequence has started to fail after moving to panel bridge
code in the msm drm driver (commit 007ac0262b ("drm/msm/dsi: switch to
DRM_PANEL_BRIDGE")). You'll see messages like this in the kernel logs:
panel-boe-tv101wum-nl6 ae94000.dsi.0: failed to set panel off: -22
This is because boe_panel_enter_sleep_mode() needs an operating DSI link
to set the panel into sleep mode. Performing those writes in the
unprepare phase of bridge ops is too late, because the link has already
been torn down by the DSI controller in post_disable, i.e. the PHY has
been disabled, etc. See dsi_mgr_bridge_post_disable() for more details
on the DSI .
Split the unprepare function into a disable part and an unprepare part.
For now, just the DSI writes to enter sleep mode are put in the disable
function. This fixes the panel off routine and keeps the panel happy.
My Wormdingler has an integrated touchscreen that stops responding to
touch if the panel is only half disabled too. This patch fixes it. And
finally, this saves power when the screen is off because without this
fix the regulators for the panel are left enabled when nothing is being
displayed on the screen.
Fixes: 007ac0262b ("drm/msm/dsi: switch to DRM_PANEL_BRIDGE")
Fixes: a869b9db7a ("drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel")
Cc: yangcong <yangcong5@huaqin.corp-partner.google.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106030108.2542081-1-swboyd@chromium.org
(cherry picked from commit c913cd5489)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bc4b43d5c ]
The debugfs dump of requests was confused about what state requires
the execlist lock versus the GuC lock. There was also a bunch of
duplicated messy code between it and the error capture code.
So refactor the hung request search into a re-usable function. And
reduce the span of the execlist state lock to only the execlist
specific code paths. In order to do that, also move the report of hold
count (which is an execlist only concept) from the top level dump
function to the lower level execlist specific function. Also, move the
execlist specific code into the execlist source file.
v2: Rename some functions and move to more appropriate files (Daniele).
v3: Rename new execlist dump function (Daniele)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-4-John.C.Harrison@Intel.com
(cherry picked from commit a4be3dca53)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86d8ddc741 ]
When GuC support was added to error capture, the reference counting
around the request object was broken. Fix it up.
The context based search manages the spinlocking around the search
internally. So it needs to grab the reference count internally as
well. The execlist only request based search relies on external
locking, so it needs an external reference count but within the
spinlock not outside it.
The only other caller of the context based search is the code for
dumping engine state to debugfs. That code wasn't previously getting
an explicit reference at all as it does everything while holding the
execlist specific spinlock. So, that needs updaing as well as that
spinlock doesn't help when using GuC submission. Rather than trying to
conditionally get/put depending on submission model, just change it to
always do the get/put.
v2: Explicitly document adding an extra blank line in some dense code
(Andy Shevchenko). Fix multiple potential null pointer derefs in case
of no request found (some spotted by Tvrtko, but there was more!).
Also fix a leaked request in case of !started and another in
__guc_reset_context now that intel_context_find_active_request is
actually reference counting the returned request.
v3: Add a _get suffix to intel_context_find_active_request now that it
grabs a reference (Daniele).
v4: Split the intel_guc_find_hung_context change to a separate patch
and rename intel_context_find_active_request_get to
intel_context_get_active_request (Tvrtko).
v5: s/locking/reference counting/ in commit message (Tvrtko)
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Fixes: 573ba126ae ("drm/i915/guc: Capture error state on context reset")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-3-John.C.Harrison@Intel.com
(cherry picked from commit 3700e35378)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87b04e53da ]
intel_guc_find_hung_context() was not acquiring the correct spinlock
before searching the request list. So fix that up. While at it, add
some extra whitespace padding for readability.
Fixes: dc0dad365c ("drm/i915/guc: Fix for error capture after full GPU reset with GuC")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-2-John.C.Harrison@Intel.com
(cherry picked from commit d1c3717501)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 343c700480 ]
Commit 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the
atomic helpers") changed the driver to just use the atomic helpers instead
of the simple KMS abstraction layer.
But the commit also made a subtle change on the display power sequence and
initialization order, by moving the ssd130x_power_on() call to the encoder
.atomic_enable handler and the ssd130x_init() call to CRTC .reset handler.
Before this change, both ssd130x_power_on() and ssd130x_init() were called
in the simple display pipeline .enable handler, so the display was already
initialized by the time the SSD130X_DISPLAY_ON command was sent.
For some reasons, it only made the ssd130x SPI driver to fail but the I2C
was still working. That is the reason why the bug was not noticed before.
To revert to the old driver behavior, move the ssd130x_init() call to the
encoder .atomic_enable as well. Besides fixing the panel not being turned
on when using SPI, it also gets rid of the custom CRTC .reset callback.
Fixes: 622113b9f1 ("drm/ssd130x: Replace simple display helpers with the atomic helpers")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230125184230.3343206-1-javierm@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51128c3f2a ]
The bcm2711 has two HDMI outputs, each with their own CEC adapter.
The CEC adapter name has to be unique, but it is currently
hardcoded to "vc4" for both outputs. Change this to use the card_name
from the variant information in order to make the adapter name unique.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 15b4511a4a ("drm/vc4: add HDMI CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/dcf1db75-d9cc-62cc-fa12-baf1b2b3bf31@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f439a959dc upstream.
This fixes the build here locally on my 32-bit arm build.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 262b42e02d ]
I'm not exactly clear on what strange workflow causes people to do it,
but clearly occasionally some files end up being committed as executable
even though they clearly aren't.
This is a reprise of commit 90fda63fa1 ("treewide: fix up files
incorrectly marked executable"), just with a different set of files (but
with the same trivial shell scripting).
So apparently we need to re-do this every five years or so, and Joe
needs to just keep reminding me to do so ;)
Reported-by: Joe Perches <joe@perches.com>
Fixes: 523375c943 ("drm/vmwgfx: Port vmwgfx to arm64")
Fixes: 5c43993777 ("ASoC: codecs: add support for ES8326")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2255bbcdc3 ]
The definition of intel_selftest_modify_policy() does not match the
declaration, as gcc-13 points out:
drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:29:5: error: conflicting types for 'intel_selftest_modify_policy' due to enum/integer mismatch; have 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, u32)' {aka 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, unsigned int)'} [-Werror=enum-int-mismatch]
29 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.c:11:
drivers/gpu/drm/i915/selftests/intel_scheduler_helpers.h:28:5: note: previous declaration of 'intel_selftest_modify_policy' with type 'int(struct intel_engine_cs *, struct intel_selftest_saved_policy *, enum selftest_scheduler_modify)'
28 | int intel_selftest_modify_policy(struct intel_engine_cs *engine,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Change the type in the definition to match.
Fixes: 617e87c05c ("drm/i915/selftest: Fix hangcheck self test for GuC submission")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230117163743.1003219-1-arnd@kernel.org
(cherry picked from commit 8d7eb8ed3f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0220e4fe17 ]
drm_vma_node_allow() and drm_vma_node_revoke() should be called in
balanced pairs. We call drm_vma_node_allow() once per-file everytime a
user calls mmap_offset, but only call drm_vma_node_revoke once per-file
on each mmap_offset. As the mmap_offset is reused by the client, the
per-file vm_count may remain non-zero and the rbtree leaked.
Call drm_vma_node_allow_once() instead to prevent that memory leak.
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Fixes: 7865559872 ("drm/i915/gem: Store mmap_offsets in an rbtree rather than a plain list")
Reported-by: Chuansheng Liu <chuansheng.liu@intel.com>
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20230117175236.22317-2-nirmoy.das@intel.com
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Sasha Levin <sashal@kernel.org>
