commit 67aea188f2 upstream.
Add dummy clk which was missed during the conversion to
mtk_clk_pdev_probe() and is required for the existing DT bindings to
keep working.
Fixes: 65c10c50c9 ("clk: mediatek: Migrate to mtk_clk_pdev_probe() for multimedia clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/9de23440fcba1ffef9e77d58c9f505105e57a250.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 366640868c upstream.
Add dummy clk for index 0 which was missed during the conversion to
mtk_clk_simple_probe().
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/d677486a5c563fe5c47aa995841adc2aaa183b8a.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd291adc5e upstream.
Add dummy clk for index 0 which was missed during the conversion to
mtk_clk_simple_probe().
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/b8526c882a50f2b158df0eccb4a165956fd8fa13.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fba40be5f upstream.
Some of the audio subsystem clocks defined in clk-mt2701.h aren't
actually used by the driver. This broke conversion to
mtk_clk_simple_probe which expects that the highest possible clk id is
defined by the ARRAY_SIZE.
Add additional dummy clocks to fill the gaps and remain compatible with
the existing DT bindings.
Fixes: 0f69a423c4 ("clk: mediatek: Switch to mtk_clk_simple_probe() where possible")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/a07584d803af57b9ce4b5df5e122c09bf5a56ac9.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c8746126a upstream.
Commit 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to
simplify driver") broke DT bindings as the highest index was reduced by
1 because the id count starts from 1 and not from 0.
Fix this, like for other drivers which had the same issue, by adding a
dummy clk at index 0.
Fixes: 973d1607d9 ("clk: mediatek: mt2701: use mtk_clk_simple_probe to simplify driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/b126a5577f3667ef19b1b5feea5e70174084fb03.1734300668.git.daniel@makrotopia.org
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89aa5925d2 upstream.
aggr_state and unit fields are u32. The result of their
multiplication may not fit in this type.
Add explicit casting to prevent overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 04053f4d23 ("clk: qcom: clk-rpmh: Add IPA clock support")
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Link: https://lore.kernel.org/r/20241203084231.6001-1-abelova@astralinux.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4cdb196f1 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for the clock where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 837519775f ("clk: qcom: Add display clock controller driver for SM6350")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-2-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96fe1a7ee4 upstream.
If a clk_rcg2 has a parent, it should also have parent_map defined,
otherwise we'll get a NULL pointer dereference when calling clk_set_rate
like the following:
[ 3.388105] Call trace:
[ 3.390664] qcom_find_src_index+0x3c/0x70 (P)
[ 3.395301] qcom_find_src_index+0x1c/0x70 (L)
[ 3.399934] _freq_tbl_determine_rate+0x48/0x100
[ 3.404753] clk_rcg2_determine_rate+0x1c/0x28
[ 3.409387] clk_core_determine_round_nolock+0x58/0xe4
[ 3.421414] clk_core_round_rate_nolock+0x48/0xfc
[ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc
[ 3.444483] clk_core_set_rate_nolock+0x8c/0x300
[ 3.455886] clk_set_rate+0x38/0x14c
Add the parent_map property for two clocks where it's missing and also
un-inline the parent_data as well to keep the matching parent_map and
parent_data together.
Fixes: 131abae905 ("clk: qcom: Add SM6350 GCC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20241220-sm6350-parent_map-v1-1-64f3d04cb2eb@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a57465766a upstream.
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 6.8
Fixes: c58225b7e3 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8650
Link: https://lore.kernel.org/r/20241219170011.70140-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 967e011013 upstream.
With PWRSTS_OFF_ON, PCIe GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of PCIe controllers from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Cc: stable@vger.kernel.org # 6.2
Fixes: 955f2ea3b9 ("clk: qcom: Add GCC driver for SM8550")
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on QRD8550
Link: https://lore.kernel.org/r/20241219170011.70140-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33f1722eb8 upstream.
Commit c45ae598fc ("clk: qcom: support for alpha mode configuration")
added support for configuring alpha mode, but it seems that the feature
was never working in practice.
The value of the alpha_{en,mode}_mask members of the configuration gets
added to the value parameter passed to the regmap_update_bits() function,
however the same values are not getting applied to the bitmask. As the
result, the respective bits in the USER_CTL register are never modifed
which leads to improper configuration of several PLLs.
The following table shows the PLL configurations where the 'alpha_en_mask'
member is set and which are passed as a parameter for the
clk_alpha_pll_configure() function. In the table the 'expected rate' column
shows the rate the PLL should run at with the given configuration, and
the 'real rate' column shows the rate the PLL runs at actually. The real
rates has been verified on hardwareOn IPQ* platforms, on other platforms,
those are computed values only.
file pll expected rate real rate
dispcc-qcm2290.c disp_cc_pll0 768.0 MHz 768.0 MHz
dispcc-sm6115.c disp_cc_pll0 768.0 MHz 768.0 MHz
gcc-ipq5018.c ubi32_pll 1000.0 MHz != 984.0 MHz
gcc-ipq6018.c nss_crypto_pll 1200.0 MHz 1200.0 MHz
gcc-ipq6018.c ubi32_pll 1497.6 MHz != 1488.0 MHz
gcc-ipq8074.c nss_crypto_pll 1200.0 MHz != 1190.4 MHz
gcc-qcm2290.c gpll11 532.0 MHz != 518.4 MHz
gcc-qcm2290.c gpll8 533.2 MHz != 518.4 MHz
gcc-qcs404.c gpll3 921.6 MHz 921.6 MHz
gcc-sm6115.c gpll11 600.0 MHz != 595.2 MHz
gcc-sm6115.c gpll8 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll0 800.0 MHz != 787.2 MHz
gpucc-sdm660.c gpu_cc_pll1 740.0 MHz != 729.6 MHz
gpucc-sm6115.c gpu_cc_pll0 1200.0 MHz != 1190.4 MHz
gpucc-sm6115.c gpu_cc_pll1 640.0 MHz != 633.6 MHz
gpucc-sm6125.c gpu_pll0 1020.0 MHz != 1017.6 MHz
gpucc-sm6125.c gpu_pll1 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll8 930.0 MHz != 921.6 MHz
mmcc-sdm660.c mmpll5 825.0 MHz != 806.4 MHz
As it can be seen from the above, there are several PLLs which are
configured incorrectly.
Change the code to apply both 'alpha_en_mask' and 'alpha_mode_mask'
values to the bitmask in order to configure the alpha mode correctly.
Applying the 'alpha_en_mask' fixes the initial rate of the PLLs showed
in the table above. Since the 'alpha_mode_mask' is not used by any driver
currently, that part of the change causes no functional changes.
Cc: stable@vger.kernel.org
Fixes: c45ae598fc ("clk: qcom: support for alpha mode configuration")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Gabor Juhos <j4g8y7@gmail.com>
Link: https://lore.kernel.org/r/20241021-fix-alpha-mode-config-v1-1-f32c254e02bc@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fb33b6797 upstream.
Since commit 02fb4f0084 ("clk: clk-loongson2: Fix potential buffer
overflow in flexible-array member access"), the clk provider register is
failed.
The count of `clks_num` is shown below:
for (p = data; p->name; p++)
clks_num++;
In fact, `clks_num` represents the number of SoC clocks and should be
expressed as the maximum value of the clock binding id in use (p->id + 1).
Now we fix it to avoid the following error when trying to register a clk
provider:
[ 13.409595] of_clk_hw_onecell_get: invalid index 17
Cc: stable@vger.kernel.org
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Fixes: 02fb4f0084 ("clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access")
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/82e43d89a9a6791129cf8ea14f4eeb666cd87be4.1736856470.git.zhoubinbin@loongson.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e24b15d470 upstream.
Setting the genpd's struct device's name with dev_set_name() is
happening within pm_genpd_init(). If it remains NULL, things can blow up
later, such as when crafting the devfs hierarchy for the power domain:
Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
...
Call trace:
strlen from start_creating+0x90/0x138
start_creating from debugfs_create_dir+0x20/0x178
debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144
genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90
genpd_debug_init from do_one_initcall+0x5c/0x244
do_one_initcall from kernel_init_freeable+0x19c/0x1f4
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x28
Bisecting tracks this crash back to commit 899f44531f ("pmdomain: core:
Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name
with dev_name(&genpd->dev) in genpd_debug_add.part().
Fixes: 899f44531f ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable@vger.kernel.org # v6.12+
Link: https://lore.kernel.org/r/20241231190336.423172-1-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1641472004 upstream.
While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.
[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest
Fixes: fb038ce4db ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable@vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d26c4ad3fa upstream.
Allowing the usb_2 controller GDSC to be turned off during system suspend
renders the controller unable to resume.
So use PWRSTS_RET_ON instead in order to make sure this the GDSC doesn't
go down.
Fixes: 161b7c401f ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-clk-gcc-fix-usb2-gdsc-pwrsts-v1-1-e15d1a5e7d80@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7f12857f0 ]
In wrpll_configure_for_rate() we try to determine the best PLL
configuration for a target rate. However, in the loop where we try
values of R, we should compare the derived `vco` with `target_vco_rate`.
However, we were in fact comparing it with `target_rate`, which is
actually after Q shift. This is incorrect, and sometimes can result in
suboptimal clock rates. Fix it.
Fixes: 7b9487a9a5 ("clk: analogbits: add Wide-Range PLL library")
Signed-off-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240830061639.2316-1-ganboing@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a43cd19f1 ]
cpu2vp_clk is a gate but was mistakenly in th1520_div_clks[] instead
of th1520_gate_clks[].
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20241228034802.1573554-1-dfustini@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 037705e94b ]
Add the CLK_IGNORE_UNUSED flag to apb_pclk, cpu2peri_x2h_clk,
perisys_apb2_hclk and perisys_apb3_hclk.
Without this flag, the boot hangs after "clk: Disabling unused clocks"
unless clk_ignore_unused is in the kernel cmdline.
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20250113-th1520-clk_ignore_unused-v1-2-0b08fb813438@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a826e53fd7 ]
Modify the call to devm_clk_hw_register_gate_parent_data() to actually
pass the clk flags from hw.init instead of just 0. This is necessary to
allow individual clk gates to specify their own clk flags.
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20250113-th1520-clk_ignore_unused-v1-1-0b08fb813438@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 830d8062d2 ]
Ralink SoC RT3883 has already 'xtal' defined as a base clock so there is no
need to redefine it again in fixed clocks section. Hence, remove the duplicate
one from there.
Fixes: d34db686a3 ("clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20250108093636.265033-1-sergio.paracuellos@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f760a4bb5e ]
Similar to the earlier fixes meant for sm8x50 and x1e platforms,
we have to stop using the shared clk ops for sdm845 QUPs as well.
As Stephen Boyd pointed out in earlier fixes, there wasn't a problem
to mark QUP clks shared until we started parking shared RCGs at clk
registration time in commit 01a0a6cc8c ("clk: qcom: Park shared RCGs
upon registration"). Parking at init is actually harmful to the UART
when earlycon is used. If the device is pumping out data while the
frequency changes and we see garbage on the serial console until the
driver can probe and actually set a proper frequency.
This patch reverts the QUP clk sharing ops part of commit 06391eddb6
("clk: qcom: Add Global Clock controller (GCC) driver for SDM845"), so
that the QUPs on sdm845 don't get parked during clk registration and
break UART operations.
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20241209174912.2526928-1-amit.pundir@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 383ca7bee8 ]
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.
Partially revert commit ca1170b699 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.
The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.
I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.
Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f368cb7ef ]
Drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL.MIPI. These are now
defined in dt-bindings/clock/sun50i-a64-ccu.h
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on pinephone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-3-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9377941f2 ]
The Titan TOP GDSC is the parent GDSC for all other GDSCs in the CAMCC
block. None of the subordinate blocks will switch on without the parent
GDSC switched on.
Fixes: 76126a5129 ("clk: qcom: Add camcc clock driver for x1e80100")
Acked-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20241227-b4-linux-next-24-12-16-titan-top-gdsc-v1-1-c96ef62fc307@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48806be086 ]
Enable the LVDS gate, MIPI DSI, PXP, FLEXIO and MU only for i.MX93,
because i.MX91 does not support them.
Update enet clk entry format to align with others.
Fixes: a27bfff88d ("clk: imx: add i.MX91 clk")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241225001443.883131-1-peng.fan@oss.nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a78535444 ]
Split IMX93_CLK_SPDIF_IPG from IMX93_CLK_SPDIF_GATE
because the IMX93_CLK_SPDIF_GATE controls the gate
of IPG clock and root clock. Without this change,
disabling IMX93_CLK_SPDIF_GATE would also disable
the IPG clock, causing register access failures.
Fixes: 1c4a4f7362 ("arm64: dts: imx93: Add audio device nodes")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241119015805.3840606-3-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a27bfff88d ]
Reuse i.MX93 clk driver for i.MX91, because i.MX91 reuses the
Clock Control Module from i.MX93, with only a few clocks removed
and a few clocks added.
For clocks specific to i.MX93 use PLAT_IMX93 to flag them, for
clocks specific to i.MX91, use PLAT_IMX91 to flag them. Others
are shared by both.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241023184651.381265-5-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 6a78535444 ("clk: imx93: Add IMX93_CLK_SPDIF_IPG clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af18ba607 ]
IMX93_CLK_END was previously defined in imx93-clock.h to indicate
the number of clocks. However, it is not part of the ABI. For starters
it does no really appear in DTS. But what's more important - new clocks
are described later, which contradicts this define in binding header.
So move this macro to clock driver.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20241023184651.381265-2-pengfei.li_1@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Stable-dep-of: 6a78535444 ("clk: imx93: Add IMX93_CLK_SPDIF_IPG clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9b7c84d22 ]
The CLKOUTn may be fed from PLL1/2/3, but the PLL1/2/3 has to be enabled
first by setting PLL_CLKE bit 11 in CCM_ANALOG_SYS_PLLn_GEN_CTRL register.
The CCM_ANALOG_SYS_PLLn_GEN_CTRL bit 11 is modeled by plln_out clock. Fix
the clock tree and place the clkout1/2 under plln_sel instead of plain plln
to let the clock subsystem correctly control the bit 11 and enable the PLL
in case the CLKOUTn is supplied by PLL1/2/3.
Fixes: 43896f56b5 ("clk: imx8mp: add clkout1/2 support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241112013718.333771-1-marex@denx.de
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28fa3291ca ]
Current implementation of of_clk_get_parent_name() leaks an OF node
reference on error path. Add a of_node_put() call before returning an
error.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 8da411cc19 ("clk: let of_clk_get_parent_name() fail for invalid clock-indices")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Link: https://lore.kernel.org/r/20241210130913.3615205-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6ca7e6240 ]
A device_node reference obtained via of_find_node_by_path() requires
explicit calls to of_node_put() after it is no longer required to avoid
leaking the resource.
Instead of adding the missing calls to of_node_put() in all execution
paths, use the cleanup attribute for 'soc' by means of the __free()
macro, which automatically calls of_node_put() when the variable goes
out of scope.
Fixes: 6aa1754764 ("clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20241031-clk-renesas-cpg-mssr-cleanup-v2-1-0010936d1154@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c384481006 upstream.
clk_imx8mp_audiomix_reset_controller_register() in the
"if !CONFIG_RESET_CONTROLLER" branch had the first
argument missing. It is an empty function for this branch
so it wasn't immediately apparent.
Fixes: 6f0e817175 ("clk: imx: clk-audiomix: Add reset controller")
Cc: <stable@vger.kernel.org> # 6.12.x
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Link: https://lore.kernel.org/r/20241219105447.889CB11FE@mail.steuer-voss.de
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4bf0b909a ]
In accordance with LicheePi 4A BSP the clock that comes to emmc/sdhci
is 198Mhz which is got through frequency division of source clock
VIDEO PLL by 4 [1].
But now the AP_SUBSYS driver sets the CLK EMMC SDIO to the same
frequency as the VIDEO PLL, equal to 792 MHz. This causes emmc/sdhci
to work 4 times slower.
Let's fix this issue by adding fixed factor clock that divides
VIDEO PLL by 4 for emmc/sdhci.
Link: 7563179071/drivers/clk/thead/clk-light-fm.c (L454)
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Link: https://lore.kernel.org/r/20241210083029.92620-1-bigunclemax@gmail.com
Tested-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2eb75f86d5 upstream.
The Documentation for EN7581 had a typo and still referenced the EN7523
BUS base source frequency. This was in conflict with a different page in
the Documentration that state that the BUS runs at 300MHz (600MHz source
with divisor set to 2) and the actual watchdog that tick at half the BUS
clock (150MHz). This was verified with the watchdog by timing the
seconds that the system takes to reboot (due too watchdog) and by
operating on different values of the BUS divisor.
The correct values for source of BUS clock are 600MHz and 540MHz.
This was also confirmed by Airoha.
Cc: stable@vger.kernel.org
Fixes: 66bc47326c ("clk: en7523: Add EN7581 support")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20241116105710.19748-1-ansuelsmth@gmail.com
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52fd1709e4 ]
With the new __counted_by annotation in clk_hw_onecell_data, the "num"
struct member must be set before accessing the "hws" array. Failing to
do so will trigger a runtime warning when enabling CONFIG_UBSAN_BOUNDS
and CONFIG_FORTIFY_SOURCE.
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Link: https://lore.kernel.org/r/20241203142915.345523-1-lihaoyu499@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79dfed29aa ]
Add support for NSS Huayra alpha pll found on ipq9574 SoCs.
Programming sequence is the same as that of Huayra type Alpha PLL,
so we can re-use the same.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Link: https://lore.kernel.org/r/20241028060506.246606-2-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1335c7eb70 ]
The display clock controller on SAR2130P is very close to the clock
controller on SM8550 (and SM8650). Reuse existing driver to add support
for the controller on SAR2130P.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-10-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2e0a04353 ]
The SAR2130P platform has the same TCSR Clock Controller as the SM8550,
except for the lack of the UFS clocks. Extend the SM8550 TCSRCC driver
to support SAR2130P.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-9-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cc88de626 ]
Define clocks as supported by the RPMh on the SAR2130P platform. The
msm-5.10 kernel declares just the CXO clock, the RF_CLK1 clock was added
following recommendation from Taniya Das.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-7-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aec8c0e28c ]
Generally SDCC clocks use clk_rcg2_floor_ops, however on SAR2130P
platform it's recommended to use rcg2_shared_ops for all Root Clock
Generators to park them instead of disabling. Implement a mix of those,
clk_rcg2_shared_floor_ops.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241027-sar2130p-clocks-v5-6-ecad2a1432ba@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 02fb4f0084 upstream.
Flexible-array member `hws` in `struct clk_hw_onecell_data` is annotated
with the `counted_by()` attribute. This means that when memory is
allocated for this array, the _counter_, which in this case is member
`num` in the flexible structure, should be set to the maximum number of
elements the flexible array can contain, or fewer.
In this case, the total number of elements for the flexible array is
determined by variable `clks_num` when allocating heap space via
`devm_kzalloc()`, as shown below:
289 struct loongson2_clk_provider *clp;
...
296 for (p = data; p->name; p++)
297 clks_num++;
298
299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
300 GFP_KERNEL);
So, `clp->clk_data.num` should be set to `clks_num` or less, and not
exceed `clks_num`, as is currently the case. Otherwise, if data is
written into `clp->clk_data.hws[clks_num]`, the instrumentation
provided by the compiler won't detect the overflow, leading to a
memory corruption bug at runtime.
Fix this issue by setting `clp->clk_data.num` to `clks_num`.
Fixes: 9796ec0bd0 ("clk: clk-loongson2: Refactor driver for adding new platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZzaN5MpmMr0hwHw9@kspp
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e4bf018bb upstream.
Some heap space is allocated for the flexible structure `struct
clk_hw_onecell_data` and its flexible-array member `hws` through
the composite structure `struct loongson2_clk_provider` in function
`loongson2_clk_probe()`, as shown below:
289 struct loongson2_clk_provider *clp;
...
296 for (p = data; p->name; p++)
297 clks_num++;
298
299 clp = devm_kzalloc(dev, struct_size(clp, clk_data.hws, clks_num),
300 GFP_KERNEL);
Then some data is written into the flexible array:
350 clp->clk_data.hws[p->id] = hw;
This corrupts `clk_lock`, which is the spinlock variable immediately
following the `clk_data` member in `struct loongson2_clk_provider`:
struct loongson2_clk_provider {
void __iomem *base;
struct device *dev;
struct clk_hw_onecell_data clk_data;
spinlock_t clk_lock; /* protect access to DIV registers */
};
The problem is that the flexible structure is currently placed in the
middle of `struct loongson2_clk_provider` instead of at the end.
Fix this by moving `struct clk_hw_onecell_data clk_data;` to the end of
`struct loongson2_clk_provider`. Also, add a code comment to help
prevent this from happening again in case new members are added to the
structure in the future.
This change also fixes the following -Wflex-array-member-not-at-end
warning:
drivers/clk/clk-loongson2.c:32:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Fixes: 9796ec0bd0 ("clk: clk-loongson2: Refactor driver for adding new platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZzZ-cd_EFXs6qFaH@kspp
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c64ef7e485 ]
In order to access the registers of the HW, we need to make sure that
the AXI bus clock is enabled. Hence let's increase the number of clocks
by one.
In order to keep backward compatibility and make sure old DTs still work
we check if clock-names is available or not. If it is, then we can
disambiguate between really having the AXI clock or a parent clock and
so we can enable the bus clock. If not, we fallback to what was done
before and don't explicitly enable the AXI bus clock.
Note that if clock-names is given, the axi clock must be the last one in
the phandle array (also enforced in the DT bindings) so that we can reuse
as much code as possible.
Fixes: 0e646c52cf ("clk: Add axi-clkgen driver")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241029-axi-clkgen-fix-axiclk-v2-2-bc5e0733ad76@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f72fc22038 ]
Introduce chip_scu regmap pointer since EN7581 SoC will access chip-scu
memory area via a syscon node. Remove first memory region mapping
for EN7581 SoC. This patch does not introduce any backward incompatibility
since the dts for EN7581 SoC is not upstream yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20241112-clk-en7581-syscon-v2-4-8ada5e394ae4@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: f98eded9e9 ("clk: en7523: fix estimation of fixed rate for EN7581")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8bdfc666b ]
Move en7523_register_clocks routine in hw_init callback.
Introduce en7523_clk_hw_init callback for EN7523 SoC.
This is a preliminary patch to differentiate IO mapped region between
EN7523 and EN7581 SoCs in order to access chip-scu IO region
<0x1fa20000 0x384> on EN7581 SoC as syscon device since it contains
miscellaneous registers needed by multiple devices (clock, pinctrl ..).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20241112-clk-en7581-syscon-v2-3-8ada5e394ae4@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: f98eded9e9 ("clk: en7523: fix estimation of fixed rate for EN7581")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31d1cdd7b ]
REG_PCIE*_MEM and REG_PCIE*_MEM_MASK regs (PBUS_CSR memory region) are not
part of the scu block on the EN7581 SoC and they are used to select the
PCIE ports on the PBUS, so remove this configuration from the clock driver
and set these registers in the PCIE host driver instead.
This patch does not introduce any backward incompatibility since the dts
for EN7581 SoC is not upstream yet.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20241112-clk-en7581-syscon-v2-2-8ada5e394ae4@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stable-dep-of: f98eded9e9 ("clk: en7523: fix estimation of fixed rate for EN7581")
Signed-off-by: Sasha Levin <sashal@kernel.org>
