commit ac1f43c03f upstream.
Commit 0dc23567c2 ("thermal: core: Move lists of thermal instances
to trip descriptors") overlooked the case in which the Power Allocator
governor attempts to bind to a tripless thermal zone and params->trip_max
is NULL in check_power_actors().
No power actors can be found in that case, so check_power_actors() needs
to be made return 0 then to restore its previous behavior.
Fixes: 0dc23567c2 ("thermal: core: Move lists of thermal instances to trip descriptors")
Closes: https://lore.kernel.org/linux-pm/Z0NeGF4ryCe_b5rr@sashalap/
Reported-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/2761105.mvXUDI8C0e@rjwysocki.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50cef76d5c upstream.
Load patches for which the driver carries a SHA256 checksum of the patch
blob.
This can be disabled by adding "microcode.amd_sha_check=off" on the
kernel cmdline. But it is highly NOT recommended.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 037e81fb9d upstream.
Put the MSR_AMD64_PATCH_LEVEL reading of the current microcode revision
the hw has, into a separate function.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-6-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef0740d10 upstream.
Commit
a7939f0167 ("x86/microcode/amd: Cache builtin/initrd microcode early")
renamed it to save_microcode_in_initrd() and made it static. Zap the
forgotten declarations.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250211163648.30531-3-bp@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78e0aadbd4 upstream
This is the natural thing to do anyway.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a85c08aaa6 upstream.
Instead of open-coding the check for size/data move it inside the
function and make it return a boolean indicating whether data was found
or not.
No functional changes.
[ bp: Write @ret in find_blobs_in_containers() only on success. ]
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241018155151.702350-2-nik.borisov@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b90e7ace7 upstream.
Currently, when validating the mokvar table, we (re)map the entire table
on each iteration of the loop, adding space as we discover new entries.
If the table grows over a certain size, this fails due to limitations of
early_memmap(), and we get a failure and traceback:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:139 __early_ioremap+0xef/0x220
...
Call Trace:
<TASK>
? __early_ioremap+0xef/0x220
? __warn.cold+0x93/0xfa
? __early_ioremap+0xef/0x220
? report_bug+0xff/0x140
? early_fixup_exception+0x5d/0xb0
? early_idt_handler_common+0x2f/0x3a
? __early_ioremap+0xef/0x220
? efi_mokvar_table_init+0xce/0x1d0
? setup_arch+0x864/0xc10
? start_kernel+0x6b/0xa10
? x86_64_start_reservations+0x24/0x30
? x86_64_start_kernel+0xed/0xf0
? common_startup_64+0x13e/0x141
</TASK>
---[ end trace 0000000000000000 ]---
mokvar: Failed to map EFI MOKvar config table pa=0x7c4c3000, size=265187.
Mapping the entire structure isn't actually necessary, as we don't ever
need more than one entry header mapped at once.
Changes efi_mokvar_table_init() to only map each entry header, not the
entire table, when determining the table size. Since we're not mapping
any data past the variable name, it also changes the code to enforce
that each variable name is NUL terminated, rather than attempting to
verify it in place.
Cc: <stable@vger.kernel.org>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6ec1e1b07 upstream.
Comparison of bitmaps should be done using bitmap_equal(), not memcmp(),
use the former one to compare isa bitmaps.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Fixes: 625034abd5 ("riscv: add ISA extensions validation callback")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250210155615.1545738-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 564fc8eb6f upstream.
The init_rt_signal_env() funciton is called before the alternative patch
is applied, so using the alternative-related API to check the availability
of an extension within this function doesn't have the intended effect.
This patch reorders the init_rt_signal_env() and apply_boot_alternatives()
to get the correct signal_minsigstksz.
Fixes: e92f469b07 ("riscv: signal: Report signal frame size to userspace via auxv")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-3-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb8179ce29 upstream.
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Cc: stable@vger.kernel.org
Fixes: 76d2a0493a ("RISC-V: Init and Halt Code")
Link: https://lore.kernel.org/r/20241104190314.270095-1-robh@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa49bc2ca8 upstream.
The signal context of certain RISC-V extensions will be appended after
struct __riscv_extra_ext_header, which already includes an empty context
header. Therefore, there is no need to preserve a separate hdr for the
END of signal context.
Fixes: 8ee0b41898 ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Andy Chiu <AndybnAC@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241220083926.19453-2-yongxuan.wang@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 599c44cd21 upstream.
Make sure the compare value in the lr/sc loop is sign extended to match
what lr.w does. Fortunately, due to the compiler keeping the register
contents sign extended anyway the lack of the explicit extension didn't
result in wrong code so far, but this cannot be relied upon.
Fixes: b90edb3301 ("RISC-V: Add futex support.")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/mvmfrkv2vhz.fsf@suse.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 713e788c0e upstream.
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f27a95845b upstream.
If the device doesn't support arpmb we'll crash due to copying user data in
bsg_transport_sg_io_fn().
In the case where ufs_bsg_exec_advanced_rpmb_req() returns an error, do not
set the job's reply_len.
Memory crash backtrace:
3,1290,531166405,-;ufshcd 0000:00:12.5: ARPMB OP failed: error code -22
4,1308,531166555,-;Call Trace:
4,1309,531166559,-; <TASK>
4,1310,531166565,-; ? show_regs+0x6d/0x80
4,1311,531166575,-; ? die+0x37/0xa0
4,1312,531166583,-; ? do_trap+0xd4/0xf0
4,1313,531166593,-; ? do_error_trap+0x71/0xb0
4,1314,531166601,-; ? usercopy_abort+0x6c/0x80
4,1315,531166610,-; ? exc_invalid_op+0x52/0x80
4,1316,531166622,-; ? usercopy_abort+0x6c/0x80
4,1317,531166630,-; ? asm_exc_invalid_op+0x1b/0x20
4,1318,531166643,-; ? usercopy_abort+0x6c/0x80
4,1319,531166652,-; __check_heap_object+0xe3/0x120
4,1320,531166661,-; check_heap_object+0x185/0x1d0
4,1321,531166670,-; __check_object_size.part.0+0x72/0x150
4,1322,531166679,-; __check_object_size+0x23/0x30
4,1323,531166688,-; bsg_transport_sg_io_fn+0x314/0x3b0
Fixes: 6ff265fc5e ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Cc: stable@vger.kernel.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Link: https://lore.kernel.org/r/20250220142039.250992-1-arthur.simchaev@sandisk.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57a0ef02fe upstream.
Commit 0d73a55208 ("ima: re-introduce own integrity cache lock")
mistakenly reverted the performance improvement introduced in commit
42a4c60319 ("ima: fix ima_inode_post_setattr"). The unused bit mask was
subsequently removed by commit 11c60f23ed ("integrity: Remove unused
macro IMA_ACTION_RULE_FLAGS").
Restore the performance improvement by introducing the new mask
IMA_NONACTION_RULE_FLAGS, equal to IMA_NONACTION_FLAGS without
IMA_NEW_FILE, which is not a rule-specific flag.
Finally, reset IMA_NONACTION_RULE_FLAGS instead of IMA_NONACTION_FLAGS in
process_measurement(), if the IMA_CHANGE_ATTR atomic flag is set (after
file metadata modification).
With this patch, new files for which metadata were modified while they are
still open, can be reopened before the last file close (when security.ima
is written), since the IMA_NEW_FILE flag is not cleared anymore. Otherwise,
appraisal fails because security.ima is missing (files with IMA_NEW_FILE
set are an exception).
Cc: stable@vger.kernel.org # v4.16.x
Fixes: 0d73a55208 ("ima: re-introduce own integrity cache lock")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fb39882b2 upstream.
In Inline mode, the journal is unused, and journal_sectors is zero.
Calculating the journal watermark requires dividing by journal_sectors,
which should be done only if the journal is configured.
Otherwise, a simple table query (dmsetup table) can cause OOPS.
This bug did not show on some systems, perhaps only due to
compiler optimization.
On my 32-bit testing machine, this reliably crashes with the following:
: Oops: divide error: 0000 [#1] PREEMPT SMP
: CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959
: EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity]
...
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c ("dm-integrity: introduce the Inline mode")
Cc: stable@vger.kernel.org # 6.11+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5534d511b upstream.
Extend protocol_variant structure with protocol field (Cf. socket(2)).
Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP
which can be used as an alias for IPPROTO_IP (=0) in socket(2).
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fef0a3b17 upstream.
a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called
without preceding balance_scx()") added a workaround to handle the cases
where pick_task_scx() is called without prececing balance_scx() which is due
to a fair class bug where pick_taks_fair() may return NULL after a true
return from balance_fair().
The workaround detects when pick_task_scx() is called without preceding
balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid
stalling. Unfortunately, the workaround code was testing whether @prev was
on SCX to decide whether to keep the task running. This is incorrect as the
task may be on SCX but no longer runnable.
This could lead to a non-runnable task to be returned from pick_task_scx()
which cause interesting confusions and failures. e.g. A common failure mode
is the task ending up with (!on_rq && on_cpu) state which can cause
potential wakers to busy loop, which can easily lead to deadlocks.
Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes
@prev_on_scx only used in one place. Open code the usage and improve the
comment while at it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pat Cody <patcody@meta.com>
Fixes: a6250aa251 ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()")
Cc: stable@vger.kernel.org # v6.12+
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 82c387ef75 upstream.
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a4952067 upstream.
Kernel test robot reported an "imbalanced put" in the rcuref_put() slow
path, which turned out to be a false positive. Consider the following race:
ref = 0 (via rcuref_init(ref, 1))
T1 T2
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath(ref)
rcuref_get(ref)
-> atomic_add_negative_relaxed(1, &ref->refcnt)
-> return true; # ref -> 0
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath()
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xffffffff / RCUREF_NOREF
-> atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD)) # ref -> 0xe0000000 / RCUREF_DEAD
-> return true
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xe0000000 / RCUREF_DEAD
-> if (cnt > RCUREF_RELEASED) # 0xe0000000 > 0xc0000000
-> WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")
The problem is the additional read in the slow path (after it
decremented to RCUREF_NOREF) which can happen after the counter has been
marked RCUREF_DEAD.
Prevent this by reusing the return value of the decrement. Now every "final"
put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to
RCUREF_DEAD.
[ bigeasy: Add changelog ]
Fixes: ee1ee6db07 ("atomics: Provide rcuref - scalable reference counting")
Reported-by: kernel test robot <oliver.sang@intel.com>
Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f3ea7ee1 upstream.
In the kernel, there are architectures (x86, arm64) that perform
boot-time relocation (for KASLR) without relying on PIE codegen. In this
case, all const global objects are emitted into .rodata, including const
objects with fields that will be fixed up by the boot-time relocation
code. This implies that .rodata (and .text in some cases) need to be
writable at boot, but they will usually be mapped read-only as soon as
the boot completes.
When using PIE codegen, the compiler will emit const global objects into
.data.rel.ro rather than .rodata if the object contains fields that need
such fixups at boot-time. This permits the linker to annotate such
regions as requiring read-write access only at load time, but not at
execution time (in user space), while keeping .rodata truly const (in
user space, this is important for reducing the CoW footprint of dynamic
executables).
This distinction does not matter for the kernel, but it does imply that
const data will end up in writable memory if the .data.rel.ro sections
are not treated in a special way, as they will end up in the writable
.data segment by default.
So emit .data.rel.ro into the .rodata segment.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8668860b0a upstream.
Before this patch, if the checksum was not used, the subflow was only
reset if map_data_len was != 0. If there were no MPTCP options or an
invalid mapping, map_data_len was not set to the data len, and then the
subflow was not reset as it should have been, leaving the MPTCP
connection in a wrong fallback mode.
This map_data_len condition has been introduced to handle the reception
of the infinite mapping. Instead, a new dedicated mapping error could
have been returned and treated as a special case. However, the commit
31bf11de14 ("mptcp: introduce MAPPING_BAD_CSUM") has been introduced
by Paolo Abeni soon after, and backported later on to stable. It better
handle the csum case, and it means the exception for valid_csum_seen in
subflow_can_fallback(), plus this one for the infinite mapping in
subflow_check_data_avail(), are no longer needed.
In other words, the code can be simplified there: a fallback should only
be done if msk->allow_infinite_fallback is set. This boolean is set to
false once MPTCP-specific operations acting on the whole MPTCP
connection vs the initial path have been done, e.g. a second path has
been created, or an MPTCP re-injection -- yes, possible even with a
single subflow. The subflow_can_fallback() helper can then be dropped,
and replaced by this single condition.
This also makes the code clearer: a fallback should only be done if it
is possible to do so.
While at it, no need to set map_data_len to 0 in get_mapping_status()
for the infinite mapping case: it will be set to skb->len just after, at
the end of subflow_check_data_avail(), and not read in between.
Fixes: f8d4bcacff ("mptcp: infinite mapping receiving")
Cc: stable@vger.kernel.org
Reported-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/544
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Chester A. Unal <chester.a.unal@xpedite-tech.com>
Link: https://patch.msgid.link/20250224-net-mptcp-misc-fixes-v1-2-f550f636b435@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c157d35146 upstream.
The Intel idle driver is preferred over the ACPI processor idle driver,
but fails to implement the work around for Core2 generation CPUs, where
the TSC stops in C2 and deeper C-states. This causes stalls and boot
delays, when the clocksource watchdog does not catch the unstable TSC
before the CPU goes deep idle for the first time.
The ACPI driver marks the TSC unstable when it detects that the CPU
supports C2 or deeper and the CPU does not have a non-stop TSC.
Add the equivivalent work around to the Intel idle driver to cure that.
Fixes: 18734958e9 ("intel_idle: Use ACPI _CST for processor models without C-state tables")
Reported-by: Fab Stz <fabstz-it@yahoo.fr>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Fab Stz <fabstz-it@yahoo.fr>
Cc: All applicable <stable@vger.kernel.org>
Closes: https://lore.kernel.org/all/10cf96aa-1276-4bd4-8966-c890377030c3@yahoo.fr
Link: https://patch.msgid.link/87bjupfy7f.ffs@tglx
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b150654f74 upstream.
Commit <d74169ceb0> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process.
Fixes: d74169ceb0 ("iommu/vt-d: Allocate DMAR fault interrupts locally")
Reported-and-tested-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://lore.kernel.org/linux-iommu/Zx9OwdLIc_VoQ0-a@shredder.mtl.com/
Tested-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250218022422.2315082-1-baolu.lu@linux.intel.com
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64f792981e upstream.
Remove the device comparison check in context_setup_pass_through_cb.
pci_for_each_dma_alias already makes a decision on whether the
callback function should be called for a device. With the check
in place it will fail to create context entries for aliases as
it walks up to the root bus.
Fixes: 2031c469f8 ("iommu/vt-d: Add support for static identity domain")
Closes: https://lore.kernel.org/linux-iommu/82499eb6-00b7-4f83-879a-e97b4144f576@linux.intel.com/
Cc: stable@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20250224180316.140123-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8789b4296a upstream.
We currently don't gate the power to the SS phy in phy_exit().
Shuffle the code slightly to ensure the power is gated to the SS phy as
well.
Fixes: 32267c29bc ("phy: exynos5-usbdrd: support Exynos USBDRD 3.1 combo phy (HS & SS)")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20241205-gs101-usb-phy-fix-v4-1-0278809fb810@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2158c953c upstream.
In exynos5_usbdrd_{pipe3,utmi}_set_refclk(), the masks
PHYCLKRST_MPLL_MULTIPLIER_MASK and PHYCLKRST_SSC_REFCLKSEL_MASK are not
inverted when applied to the register values. Fix it.
Cc: stable@vger.kernel.org
Fixes: 59025887fb ("phy: Add new Exynos5 USB 3.0 PHY driver")
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20250209-exynos5-usbdrd-masks-v1-1-4f7f83f323d7@disroot.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55f1a5f7c9 upstream.
Observed VBUS_OVERRIDE & ID_OVERRIDE might be programmed
with unexpected value prior to XUSB PADCTL driver, this
could also occur in virtualization scenario.
For example, UEFI firmware programs ID_OVERRIDE=GROUNDED to set
a type-c port to host mode and keeps the value to kernel.
If the type-c port is connected a usb host, below errors can be
observed right after usb host mode driver gets probed. The errors
would keep until usb role class driver detects the type-c port
as device mode and notifies usb device mode driver to set both
ID_OVERRIDE and VBUS_OVERRIDE to correct value by XUSB PADCTL
driver.
[ 173.765814] usb usb3-port2: Cannot enable. Maybe the USB cable is bad?
[ 173.765837] usb usb3-port2: config error
Taking virtualization into account, asserting XUSB PADCTL
reset would break XUSB functions used by other guest OS,
hence only reset VBUS & ID OVERRIDE of the port in
utmi_phy_init.
Fixes: bbf711682c ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Change-Id: Ic63058d4d49b4a1f8f9ab313196e20ad131cc591
Signed-off-by: BH Hsieh <bhsieh@nvidia.com>
Signed-off-by: Henry Lin <henryl@nvidia.com>
Link: https://lore.kernel.org/r/20250122105943.8057-1-henryl@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 249df695c3 upstream.
There is an off-by-one issue for the err_chained_bd path, it will free
one more tx_swbd than expected. But there is no such issue for the
err_map_data path. To fix this off-by-one issue and make the two error
handling consistent, the increment of 'i' and 'count' remain in sync
and enetc_unwind_tx_frame() is called for error handling.
Fixes: fb8629e2cb ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 432a2cb3ee upstream.
The 'xdp_tx' is used to count the number of XDP_TX frames sent, not the
number of Tx BDs.
Fixes: 7ed2bc8007 ("net: enetc: add support for XDP_TX")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbcbc906ab upstream.
There is an issue with one-step timestamp based on UDP/IP. The peer will
discard the sync packet because of the wrong UDP checksum. For ENETC v1,
the software needs to update the UDP checksum when updating the
originTimestamp field, so that the hardware can correctly update the UDP
checksum when updating the correction field. Otherwise, the UDP checksum
in the sync packet will be wrong.
Fixes: 7294380c52 ("enetc: support PTP Sync packet one-step timestamping")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-6-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a562d0c4a8 upstream.
Actually ENETC VFs do not support HWTSTAMP_TX_ONESTEP_SYNC because only
ENETC PF can access PMa_SINGLE_STEP registers. And there will be a crash
if VFs are used to test one-step timestamp, the crash log as follows.
[ 129.110909] Unable to handle kernel paging request at virtual address 00000000000080c0
[ 129.287769] Call trace:
[ 129.290219] enetc_port_mac_wr+0x30/0xec (P)
[ 129.294504] enetc_start_xmit+0xda4/0xe74
[ 129.298525] enetc_xmit+0x70/0xec
[ 129.301848] dev_hard_start_xmit+0x98/0x118
Fixes: 41514737ec ("enetc: add get_ts_info interface for ethtool")
Cc: stable@vger.kernel.org
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-5-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da291996b1 upstream.
When creating a TSO header, if the skb is VLAN tagged, the extended BD
will be used and the 'count' should be increased by 2 instead of 1.
Otherwise, when an error occurs, less tx_swbd will be freed than the
actual number.
Fixes: fb8629e2cb ("net: enetc: add support for software TSO")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39ab773e4c upstream.
When a DMA mapping error occurs while processing skb frags, it will free
one more tx_swbd than expected, so fix this off-by-one issue.
Fixes: d4fd0404c1 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Cc: stable@vger.kernel.org
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://patch.msgid.link/20250224111251.1061098-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 992ee3ed6e upstream.
While setting the DAC value, the wrong boolean value is evaluated to set
the DSP bias current. So let's correct the conditional statement and use
the right boolean value read from the DTS set in the priv.
Cc: stable@vger.kernel.org
Fixes: d1cb613efb ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250219130923.7216-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f06e4bfd01 upstream.
Loongson's DWMAC device may take nearly two seconds to complete DMA reset,
however, the default waiting time for reset is 200 milliseconds.
Therefore, the following error message may appear:
[14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma
Fixes: 803fc61df2 ("net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250219020701.15139-1-zhaoqunqin@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71c49ee9bb upstream.
According to the chip manual, the I2C register access type of
Loongson-2K2000/LS7A is "B", so we can only access registers in byte
form (readb()/writeb()).
Although Loongson-2K0500/Loongson-2K1000 do not have similar
constraints, register accesses in byte form also behave correctly.
Also, in hardware, the frequency division registers are defined as two
separate registers (high 8-bit and low 8-bit), so we just access them
directly as bytes.
Fixes: 015e61f0bf ("i2c: ls2x: Add driver for Loongson-2K/LS7A I2C controller")
Co-developed-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Hongliang Wang <wanghongliang@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Cc: stable@vger.kernel.org # v6.3+
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250220125612.1910990-1-zhoubinbin@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6aa36e957 upstream.
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b1283e1ea upstream.
When the range of present physical memory is sufficiently small enough
and the reserved address space for the linear map is sufficiently large
enough, The linear map base address is randomized in
arm64_memblock_init().
Prior to commit 62cffa496a ("arm64/mm: Override PARange for !LPA2 and
use it consistently"), we decided if the sizes were suitable with the
help of the raw mmfr0.parange. But the commit changed this to use the
sanitized version instead. But the function runs before the register has
been sanitized so this returns 0, interpreted as a parange of 32 bits.
Some fun wrapping occurs and the logic concludes that there is enough
room to randomize the linear map base address, when really there isn't.
So the top of the linear map ends up outside the reserved address space.
Since the PA range cannot be overridden in the first place, restore the
mmfr0 reading logic to its state prior to 62cffa496a, where the raw
register value is used.
Reported-by: Luiz Capitulino <luizcap@redhat.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Closes: https://lore.kernel.org/all/a3d9acbe-07c2-43b6-9ba9-a7585f770e83@redhat.com/
Fixes: 62cffa496a ("arm64/mm: Override PARange for !LPA2 and use it consistently")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250225114638.2038006-1-ryan.roberts@arm.com
Cc: stable@vger.kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4de141b8b1 upstream.
[Why]
DC is not using amdgpu_irq_get/put to manage the HPD interrupt refcounts.
So when amdgpu_irq_gpu_reset_resume_helper() reprograms all of the IRQs,
HPD gets disabled.
[How]
Use amdgpu_irq_get/put() for HPD init/fini in DM in order to sync refcounts
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f3dde2ff7f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
