commit b9a4952067 upstream.
Kernel test robot reported an "imbalanced put" in the rcuref_put() slow
path, which turned out to be a false positive. Consider the following race:
ref = 0 (via rcuref_init(ref, 1))
T1 T2
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath(ref)
rcuref_get(ref)
-> atomic_add_negative_relaxed(1, &ref->refcnt)
-> return true; # ref -> 0
rcuref_put(ref)
-> atomic_add_negative_release(-1, ref) # ref -> 0xffffffff
-> rcuref_put_slowpath()
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xffffffff / RCUREF_NOREF
-> atomic_try_cmpxchg_release(&ref->refcnt, &cnt, RCUREF_DEAD)) # ref -> 0xe0000000 / RCUREF_DEAD
-> return true
-> cnt = atomic_read(&ref->refcnt); # cnt -> 0xe0000000 / RCUREF_DEAD
-> if (cnt > RCUREF_RELEASED) # 0xe0000000 > 0xc0000000
-> WARN_ONCE(cnt >= RCUREF_RELEASED, "rcuref - imbalanced put()")
The problem is the additional read in the slow path (after it
decremented to RCUREF_NOREF) which can happen after the counter has been
marked RCUREF_DEAD.
Prevent this by reusing the return value of the decrement. Now every "final"
put uses RCUREF_NOREF in the slow path and attempts the final cmpxchg() to
RCUREF_DEAD.
[ bigeasy: Add changelog ]
Fixes: ee1ee6db07 ("atomics: Provide rcuref - scalable reference counting")
Reported-by: kernel test robot <oliver.sang@intel.com>
Debugged-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/oe-lkp/202412311453.9d7636a2-lkp@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68f3ea7ee1 upstream.
In the kernel, there are architectures (x86, arm64) that perform
boot-time relocation (for KASLR) without relying on PIE codegen. In this
case, all const global objects are emitted into .rodata, including const
objects with fields that will be fixed up by the boot-time relocation
code. This implies that .rodata (and .text in some cases) need to be
writable at boot, but they will usually be mapped read-only as soon as
the boot completes.
When using PIE codegen, the compiler will emit const global objects into
.data.rel.ro rather than .rodata if the object contains fields that need
such fixups at boot-time. This permits the linker to annotate such
regions as requiring read-write access only at load time, but not at
execution time (in user space), while keeping .rodata truly const (in
user space, this is important for reducing the CoW footprint of dynamic
executables).
This distinction does not matter for the kernel, but it does imply that
const data will end up in writable memory if the .data.rel.ro sections
are not treated in a special way, as they will end up in the writable
.data segment by default.
So emit .data.rel.ro into the .rodata segment.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-5-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a6aa36e957 upstream.
For devices that natively support zone append operations,
REQ_OP_ZONE_APPEND BIOs are not processed through zone write plugging
and are immediately issued to the zoned device. This means that there is
no write pointer offset tracking done for these operations and that a
zone write plug is not necessary.
However, when receiving a zone append BIO, we may already have a zone
write plug for the target zone if that zone was previously partially
written using regular write operations. In such case, since the write
pointer offset of the zone write plug is not incremented by the amount
of sectors appended to the zone, 2 issues arise:
1) we risk leaving the plug in the disk hash table if the zone is fully
written using zone append or regular write operations, because the
write pointer offset will never reach the "zone full" state.
2) Regular write operations that are issued after zone append operations
will always be failed by blk_zone_wplug_prepare_bio() as the write
pointer alignment check will fail, even if the user correctly
accounted for the zone append operations and issued the regular
writes with a correct sector.
Avoid these issues by immediately removing the zone write plug of zones
that are the target of zone append operations when blk_zone_plug_bio()
is called. The new function blk_zone_wplug_handle_native_zone_append()
implements this for devices that natively support zone append. The
removal of the zone write plug using disk_remove_zone_wplug() requires
aborting all plugged regular write using disk_zone_wplug_abort() as
otherwise the plugged write BIOs would never be executed (with the plug
removed, the completion path will never see again the zone write plug as
disk_get_zone_wplug() will return NULL). Rate-limited warnings are added
to blk_zone_wplug_handle_native_zone_append() and to
disk_zone_wplug_abort() to signal this.
Since blk_zone_wplug_handle_native_zone_append() is called in the hot
path for operations that will not be plugged, disk_get_zone_wplug() is
optimized under the assumption that a user issuing zone append
operations is not at the same time issuing regular writes and that there
are no hashed zone write plugs. The struct gendisk atomic counter
nr_zone_wplugs is added to check this, with this counter incremented in
disk_insert_zone_wplug() and decremented in disk_remove_zone_wplug().
To be consistent with this fix, we do not need to fill the zone write
plug hash table with zone write plugs for zones that are partially
written for a device that supports native zone append operations.
So modify blk_revalidate_seq_zone() to return early to avoid allocating
and inserting a zone write plug for partially written sequential zones
if the device natively supports zone append.
Reported-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Fixes: 9b1ce7f0c6 ("block: Implement zone append emulation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Jorgen Hansen <Jorgen.Hansen@wdc.com>
Link: https://lore.kernel.org/r/20250214041434.82564-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 73cfc53cc3 ]
A C jump table (such as the one used by the BPF interpreter) is a const
global array of absolute code addresses, and this means that the actual
values in the table may not be known until the kernel is booted (e.g.,
when using KASLR or when the kernel VA space is sized dynamically).
When using PIE codegen, the compiler will default to placing such const
global objects in .data.rel.ro (which is annotated as writable), rather
than .rodata (which is annotated as read-only). As C jump tables are
explicitly emitted into .rodata, this used to result in warnings for
LoongArch builds (which uses PIE codegen for the entire kernel) like
Warning: setting incorrect section attributes for .rodata..c_jump_table
due to the fact that the explicitly specified .rodata section inherited
the read-write annotation that the compiler uses for such objects when
using PIE codegen.
This warning was suppressed by explicitly adding the read-only
annotation to the __attribute__((section(""))) string, by commit
c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Unfortunately, this hack does not work on Clang's integrated assembler,
which happily interprets the appended section type and permission
specifiers as part of the section name, which therefore no longer
matches the hard-coded pattern '.rodata..c_jump_table' that objtool
expects, causing it to emit a warning
kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame
Work around this, by emitting C jump tables into .data.rel.ro instead,
which is treated as .rodata by the linker script for all builds, not
just PIE based ones.
Fixes: c5b1184dec ("compiler.h: specify correct attribute for .rodata..c_jump_table")
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> # on LoongArch
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06e2474598 ]
There are no users of annotate_reachable() left.
And the annotate_unreachable() usage in unreachable() is plain wrong;
it will hide dangerous fall-through code-gen.
Remove both.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094312.235637588@infradead.org
Stable-dep-of: 73cfc53cc3 ("objtool: Fix C jump table annotations for Clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c837de3810 ]
Since barrier_before_unreachable() is empty for !GCC it is trivial to
unify the two definitions. Less is more.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20241128094311.924381359@infradead.org
Stable-dep-of: 73cfc53cc3 ("objtool: Fix C jump table annotations for Clang")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18912c5206 ]
Currently, we report -ETOOSMALL (err) only on the first iteration
(!sent). When we get put_cmsg error after a bunch of successful
put_cmsg calls, we don't signal the error at all. This might be
confusing on the userspace side which will see truncated CMSGs
but no MSG_CTRUNC signal.
Consider the following case:
- sizeof(struct cmsghdr) = 16
- sizeof(struct dmabuf_cmsg) = 24
- total cmsg size (CMSG_LEN) = 40 (16+24)
When calling recvmsg with msg_controllen=60, the userspace
will receive two(!) dmabuf_cmsg(s), the first one will
be a valid one and the second one will be silently truncated. There is no
easy way to discover the truncation besides doing something like
"cm->cmsg_len != CMSG_LEN(sizeof(dmabuf_cmsg))".
Introduce new put_devmem_cmsg wrapper that reports an error instead
of doing the truncation. Mina suggests that it's the intended way
this API should work.
Note that we might now report MSG_CTRUNC when the users (incorrectly)
call us with msg_control == NULL.
Fixes: 8f0b3cc9a4 ("tcp: RX path for devmem TCP")
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250224174401.3582695-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 769c1b7929 ]
When SPI is used for control, the driver must hold the SPI bus lock
while issuing the sequence of writes to perform a soft reset.
>From the time the driver writes the SYSTEM_RESET command until the
driver does a write to terminate the reset, there must not be any
activity on the SPI bus lines. If there is any SPI activity during the
soft-reset, another soft-reset will be triggered. The state of the SPI
chip select is irrelevant.
A repeated soft-reset does not in itself cause any problems, and it is
not an infinite loop. The problem is a race between these resets and
the driver polling for boot completion. There is a time window between
soft resets where the driver could read HALO_STATE as 2 (fully booted)
while the chip is actually soft-resetting. Although this window is
small, it is long enough that it is possible to hit it in normal
operation.
To prevent this race and ensure the chip really is fully booted, the
driver calls spi_bus_lock() to prevent other activity while resetting.
It then issues the SYSTEM_RESET mailbox command. After allowing
sufficient time for reset to take effect, the driver issues a PING
mailbox command, which will force completion of the full soft-reset
sequence. The SPI bus lock can then be released. The mailbox is
checked for any boot or wakeup response from the firmware, before the
value in HALO_STATE will be trusted.
This does not affect SoundWire or I2C control.
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250225131843.113752-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e863e5db6 ]
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 27843ce6ba ("ipvlan: ensure network headers are in skb linear part")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f0fc3374f ]
Give an afs_server object a ref on the afs_cell object it points to so that
the cell doesn't get deleted before the server record.
Whilst this is circular (cell -> vol -> server_list -> server -> cell), the
ref only pins the memory, not the lifetime as that's controlled by the
activity counter. When the volume's activity counter reaches 0, it
detaches from the cell and discards its server list; when a cell's activity
counter reaches 0, it discards its root volume. At that point, the
circularity is cut.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
Link: https://patch.msgid.link/20250218192250.296870-6-dhowells@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bbd6e863b ]
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f9 ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b62df568 ]
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14ad6ed30a ]
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 3948b05950 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6412e697 ]
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5a28b38c ]
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/
Cc: kuniyu@amazon.com
Cc: ushankar@purestorage.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4eae0ee0f1 ("arp: switch to dev_getbyhwaddr() in arp_req_set_public()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0a5e2bba3 ]
The regulator framework uses current limits, but the PSE standard and
known PSE controllers rely on power limits. Instead of converting
current to power within each driver, perform the conversion in the PSE
core. This avoids redundancy in driver implementation and aligns better
with the standard, simplifying driver development.
Remove at the same time the _pse_ethtool_get_status() function which is
not needed anymore.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: f6093c5ec7 ("net: pse-pd: pd692x0: Fix power limit retrieval")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfa2f4d5f9 ]
pci_intx() is a hybrid function which can sometimes be managed through
devres. This hybrid nature is undesirable.
Since all users of pci_intx() have by now been ported either to
always-managed pcim_intx() or never-managed pci_intx_unmanaged(), the
devres functionality can be removed from pci_intx().
Consequently, pci_intx_unmanaged() is now redundant, because pci_intx()
itself is now unmanaged.
Remove the devres functionality from pci_intx(). Have all users of
pci_intx_unmanaged() call pci_intx(). Remove pci_intx_unmanaged().
Link: https://lore.kernel.org/r/20241209130632.132074-13-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f546e8033d ]
pci_intx() is a hybrid function which sometimes performs devres operations,
depending on whether pcim_enable_device() has been used to enable the
pci_dev. This sometimes-managed nature of the function is problematic.
Notably, it causes the function to allocate under some circumstances which
makes it unusable from interrupt context.
Export pcim_intx() (which is always managed) and rename __pcim_intx()
(which is never managed) to pci_intx_unmanaged() and export it as well.
Then all callers of pci_intx() can be ported to the version they need,
depending whether they use pci_enable_device() or pcim_enable_device().
Link: https://lore.kernel.org/r/20241209130632.132074-3-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9d959c36b ]
In order to remove the deprecated function
pcim_iomap_regions_request_all(), a few drivers need an interface to
request all BARs a PCI device offers.
Make pcim_request_all_regions() a public interface.
Link: https://lore.kernel.org/r/20241030112743.104395-2-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: d555ed45a5 ("PCI: Restore original INTX_DISABLE bit by pcim_intx()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e45a09a1d ]
serio_pause_rx() and serio_continue_rx() are usually used together to
temporarily stop receiving interrupts/data for a given serio port.
Define "serio_pause_rx" guard for this so that the port is always
resumed once critical section is over.
Example:
scoped_guard(serio_pause_rx, elo->serio) {
elo->expected_packet = toupper(packet[0]);
init_completion(&elo->cmd_done);
}
Link: https://lore.kernel.org/r/20240905041732.2034348-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Stable-dep-of: 08bd5b7c9a ("Input: synaptics - fix crash when enabling pass-through port")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8507a25ce ]
Now that we have laid the groundwork, introduce OA sync properties in the
uapi and parse the input xe_sync array as is done elsewhere in the
driver. Also add DRM_XE_OA_CAPS_SYNCS bit in OA capabilities for userspace.
v2: Fix and document DRM_XE_SYNC_TYPE_USER_FENCE for OA (Matt B)
Add DRM_XE_OA_CAPS_SYNCS bit to OA capabilities (Jose)
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-3-ashutosh.dixit@intel.com
Stable-dep-of: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 482ad2a4ac ]
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 71b8471c93 ("ipv4: use RCU protection in ipv4_default_advmss()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 071d801286 ]
ip_dst_mtu_maybe_forward() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: f87c10a8aa ("ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 469308552c ]
ip4_dst_hoplimit() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: fa50d974d1 ("ipv4: Namespaceify ip_default_ttl sysctl knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 209f4e43b8 ]
Introduce a new clock gating lock to serialize access to some of the clock
gating members instead of the host_lock.
While at it, simplify the code with the guard() macro and co for automatic
cleanup of the new lock. There are some explicit
spin_lock_irqsave()/spin_unlock_irqrestore() snaking instances I left
behind because I couldn't make heads or tails of it.
Additionally, move the trace_ufshcd_clk_gating() call from inside the
region protected by the lock as it doesn't needs protection.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20241124070808.194860-4-avri.altman@wdc.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b564 ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0600cf40e9 ]
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Cc: Alexander Lobakin <aleksander.lobakin@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd107 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b69bb476de upstream.
Tejun reported the following race between fork() and cgroup.kill at [1].
Tejun:
I was looking at cgroup.kill implementation and wondering whether there
could be a race window. So, __cgroup_kill() does the following:
k1. Set CGRP_KILL.
k2. Iterate tasks and deliver SIGKILL.
k3. Clear CGRP_KILL.
The copy_process() does the following:
c1. Copy a bunch of stuff.
c2. Grab siglock.
c3. Check fatal_signal_pending().
c4. Commit to forking.
c5. Release siglock.
c6. Call cgroup_post_fork() which puts the task on the css_set and tests
CGRP_KILL.
The intention seems to be that either a forking task gets SIGKILL and
terminates on c3 or it sees CGRP_KILL on c6 and kills the child. However, I
don't see what guarantees that k3 can't happen before c6. ie. After a
forking task passes c5, k2 can take place and then before the forking task
reaches c6, k3 can happen. Then, nobody would send SIGKILL to the child.
What am I missing?
This is indeed a race. One way to fix this race is by taking
cgroup_threadgroup_rwsem in write mode in __cgroup_kill() as the fork()
side takes cgroup_threadgroup_rwsem in read mode from cgroup_can_fork()
to cgroup_post_fork(). However that would be heavy handed as this adds
one more potential stall scenario for cgroup.kill which is usually
called under extreme situation like memory pressure.
To fix this race, let's maintain a sequence number per cgroup which gets
incremented on __cgroup_kill() call. On the fork() side, the
cgroup_can_fork() will cache the sequence number locally and recheck it
against the cgroup's sequence number at cgroup_post_fork() site. If the
sequence numbers mismatch, it means __cgroup_kill() can been called and
we should send SIGKILL to the newly created task.
Reported-by: Tejun Heo <tj@kernel.org>
Closes: https://lore.kernel.org/all/Z5QHE2Qn-QZ6M-KW@slm.duckdns.org/ [1]
Fixes: 661ee62809 ("cgroup: introduce cgroup.kill")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba69e0750b upstream.
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7687c66c18 ]
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202412241958.dbAImJsA-lkp@intel.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20241213180841.3023843-1-briannorris@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 535a07698b ]
parport_serial driver uses subset of WCH IDs that are present in 8250_pci.
Share them via pci_ids.h and switch parport_serial to use defined constants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20241204031114.1029882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f47ed294a ]
The conditions for whether or not a request is allowed adding to a
completion batch are a bit hard to read, and they also have a few
issues. One is that ioerror may indeed be a random value on passthrough,
and it's being checked unconditionally of whether or not the given
request is a passthrough request or not.
Rewrite the conditions to be separate for easier reading, and only check
ioerror for non-passthrough requests. This fixes an issue with bio
unmapping on passthrough, where it fails getting added to a batch. This
both leads to suboptimal performance, and may trigger a potential
schedule-under-atomic condition for polled passthrough IO.
Fixes: f794f3351f ("block: add support for blk_mq_end_request_batch()")
Link: https://lore.kernel.org/r/20575f0a-656e-4bb3-9d82-dec6c7e3a35c@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00a2e5d48 ]
Starting with DPCD version 2.0 bits 6:3 of the DP_DSC_BITS_PER_PIXEL_INC
DPCD register contains the NativeYCbCr422_MAX_bpp_DELTA field, which can
be non-zero as opposed to earlier DPCD versions, hence decoding the
bit_per_pixel increment value at bits 2:0 in the same register requires
applying a mask, do so.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Fixes: 0c2287c965 ("drm/display/dp: Add helper function to get DSC bpp precision")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212161851.4007005-1-imre.deak@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 53dac34539 upstream.
hrtimers are migrated away from the dying CPU to any online target at
the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers
handling tasks involved in the CPU hotplug forward progress.
However wakeups can still be performed by the outgoing CPU after
CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being
armed. Depending on several considerations (crystal ball power management
based election, earliest timer already enqueued, timer migration enabled or
not), the target may eventually be the current CPU even if offline. If that
happens, the timer is eventually ignored.
The most notable example is RCU which had to deal with each and every of
those wake-ups by deferring them to an online CPU, along with related
workarounds:
_ e787644caf (rcu: Defer RCU kthreads wakeup when CPU is dying)
_ 9139f93209 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU)
_ f7345ccc62 (rcu/nocb: Fix rcuog wake-up from offline softirq)
The problem isn't confined to RCU though as the stop machine kthread
(which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end
of its work through cpu_stop_signal_done() and performs a wake up that
eventually arms the deadline server timer:
WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0
CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted
Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0
RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0
Call Trace:
<TASK>
start_dl_timer
enqueue_dl_entity
dl_server_start
enqueue_task_fair
enqueue_task
ttwu_do_activate
try_to_wake_up
complete
cpu_stopper_thread
Instead of providing yet another bandaid to work around the situation, fix
it in the hrtimers infrastructure instead: always migrate away a timer to
an online target whenever it is enqueued from an offline CPU.
This will also allow to revert all the above RCU disgraceful hacks.
Fixes: 5c0930ccaa ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Reported-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/all/20250117232433.24027-1-frederic@kernel.org
Closes: 20241213203739.1519801-1-usamaarif642@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8259cb14a7 upstream.
RV per-task monitors are implemented through a monitor structure
available for each task_struct. This structure is reset every time the
monitor is (re-)started, to avoid inconsistencies if the monitor was
activated previously.
To do so, we reset the monitor on all threads using the macro
for_each_process_thread. However, this macro excludes the idle tasks on
each CPU. Idle tasks could be considered tasks on their own right and it
should be up to the model whether to ignore them or not.
Reset monitors also on the idle tasks for each present CPU whenever we
reset all per-task monitors.
Cc: stable@vger.kernel.org
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250115151547.605750-2-gmonaco@redhat.com
Fixes: 792575348f ("rv/include: Add deterministic automata monitor definition via C macros")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8fb2403dd upstream.
devm_blk_crypto_profile_init() registers a cleanup handler to run when
the associated (platform-) device is being released. For UFS, the
crypto private data and pointers are stored as part of the ufs_hba's
data structure 'struct ufs_hba::crypto_profile'. This structure is
allocated as part of the underlying ufshcd and therefore Scsi_host
allocation.
During driver release or during error handling in ufshcd_pltfrm_init(),
this structure is released as part of ufshcd_dealloc_host() before the
(platform-) device associated with the crypto call above is released.
Once this device is released, the crypto cleanup code will run, using
the just-released 'struct ufs_hba::crypto_profile'. This causes a
use-after-free situation:
Call trace:
kfree+0x60/0x2d8 (P)
kvfree+0x44/0x60
blk_crypto_profile_destroy_callback+0x28/0x70
devm_action_release+0x1c/0x30
release_nodes+0x6c/0x108
devres_release_all+0x98/0x100
device_unbind_cleanup+0x20/0x70
really_probe+0x218/0x2d0
In other words, the initialisation code flow is:
platform-device probe
ufshcd_pltfrm_init()
ufshcd_alloc_host()
scsi_host_alloc()
allocation of struct ufs_hba
creation of scsi-host devices
devm_blk_crypto_profile_init()
devm registration of cleanup handler using platform-device
and during error handling of ufshcd_pltfrm_init() or during driver
removal:
ufshcd_dealloc_host()
scsi_host_put()
put_device(scsi-host)
release of struct ufs_hba
put_device(platform-device)
crypto cleanup handler
To fix this use-after free, change ufshcd_alloc_host() to register a
devres action to automatically cleanup the underlying SCSI device on
ufshcd destruction, without requiring explicit calls to
ufshcd_dealloc_host(). This way:
* the crypto profile and all other ufs_hba-owned resources are
destroyed before SCSI (as they've been registered after)
* a memleak is plugged in tc-dwc-g210-pci.c remove() as a
side-effect
* EXPORT_SYMBOL_GPL(ufshcd_dealloc_host) can be removed fully as
it's not needed anymore
* no future drivers using ufshcd_alloc_host() could ever forget
adding the cleanup
Fixes: cb77cb5abe ("blk-crypto: rename blk_keyslot_manager to blk_crypto_profile")
Fixes: d76d9d7d10 ("scsi: ufs: use devm_blk_ksm_init()")
Cc: stable@vger.kernel.org
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250124-ufshcd-fix-v4-1-c5d0144aae59@linaro.org
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b3e2d4ec0 upstream.
According to the UFS Device Specification, the dExtendedUFSFeaturesSupport
defines the support for TOO_HIGH_TEMPERATURE as bit[4] and the
TOO_LOW_TEMPERATURE as bit[5]. Correct the code to match with
the UFS device specification definition.
Cc: stable@vger.kernel.org
Fixes: e88e2d3220 ("scsi: ufs: core: Probe for temperature notification support")
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/69992b3e3e3434a5c7643be5a64de48be892ca46.1736793068.git.quic_nguyenb@quicinc.com
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2255b40cac upstream.
Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 931656b9e2 upstream.
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4e ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e7381f361 upstream.
Explicitly verify the target vCPU is fully online _prior_ to clamping the
index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will
generate '0', i.e. KVM will return vCPU0 instead of NULL.
In practice, the bug is unlikely to cause problems, as it will only come
into play if userspace or the guest is buggy or misbehaving, e.g. KVM may
send interrupts to vCPU0 instead of dropping them on the floor.
However, returning vCPU0 when it shouldn't exist per online_vcpus is
problematic now that KVM uses an xarray for the vCPUs array, as KVM needs
to insert into the xarray before publishing the vCPU to userspace (see
commit c5b0775491 ("KVM: Convert the kvm->vcpus array to a xarray")),
i.e. before vCPU creation is guaranteed to succeed.
As a result, incorrectly providing access to vCPU0 will trigger a
use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu()
bails out of vCPU creation due to an error and frees vCPU0. Commit
afb2acb2e3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but
in doing so introduced an unsolvable teardown conundrum. Preventing
accesses to vCPU0 before it's fully online will allow reverting commit
afb2acb2e3, without re-introducing the vcpu_array[0] UAF race.
Fixes: 1d487e9bf8 ("KVM: fix spectrev1 gadgets")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241009150455.1057573-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 127186cfb1 upstream.
THe md-linear is removed by commit 849d18e27b ("md: Remove deprecated
CONFIG_MD_LINEAR") because it has been marked as deprecated for a long
time.
However, md-linear is used widely for underlying disks with different size,
sadly we didn't know this until now, and it's true useful to create
partitions and assemble multiple raid and then append one to the other.
People have to use dm-linear in this case now, however, they will prefer
to minimize the number of involved modules.
Fixes: 849d18e27b ("md: Remove deprecated CONFIG_MD_LINEAR")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Coly Li <colyli@kernel.org>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20250102112841.1227111-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 811b8f534f ]
In case of tc offload, when user space queries the kernel for tc action
statistics, tc will query the offloaded statistics from device drivers.
Among other statistics, drivers are expected to pass the number of
packets that hit the action since the last query as a 64-bit number.
Unfortunately, tc treats the number of packets as a 32-bit number,
leading to truncation and incorrect statistics when the number of
packets since the last query exceeds 0xffffffff:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 58 sec used 0 sec
Action statistics:
Sent 1133877034176 bytes 536959475 pkt (dropped 0, overlimits 0 requeues 0)
[...]
According to the above, 2111-byte packets were redirected which is
impossible as only 64-byte packets were transmitted and the MTU was
1500.
Fix by treating packets as a 64-bit number:
$ tc -s filter show dev swp2 ingress
filter protocol all pref 1 flower chain 0
filter protocol all pref 1 flower chain 0 handle 0x1
skip_sw
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device swp1) stolen
index 1 ref 1 bind 1 installed 61 sec used 0 sec
Action statistics:
Sent 1370624380864 bytes 21416005951 pkt (dropped 0, overlimits 0 requeues 0)
[...]
Which shows that only 64-byte packets were redirected (1370624380864 /
21416005951 = 64).
Fixes: 3804070235 ("net/sched: Enable netdev drivers to update statistics of offloaded actions")
Reported-by: Joe Botha <joe@atomic.ac>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250204123839.1151804-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4241a702e0 ]
The rxrpc_connection attend queue is never used because conn::attend_link
is never initialised and so is always NULL'd out and thus always appears to
be busy. This requires the following fix:
(1) Fix this the attend queue problem by initialising conn::attend_link.
And, consequently, two further fixes for things masked by the above bug:
(2) Fix rxrpc_input_conn_event() to handle being invoked with a NULL
sk_buff pointer - something that can now happen with the above change.
(3) Fix the RXRPC_SKB_MARK_SERVICE_CONN_SECURED message to carry a pointer
to the connection and a ref on it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
Fixes: f2cce89a07 ("rxrpc: Implement a mechanism to send an event notification to a connection")
Link: https://patch.msgid.link/20250203110307.7265-3-dhowells@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bebc7869c ]
The F11 key on the new Lenovo Thinkpad T14 Gen 5, T16 Gen 3, and P14s
Gen 5 laptops includes a symbol showing a smartphone and a laptop
chained together. According to the user manual, it starts the Microsoft
Phone Link software used to connect to Android/iOS devices and relay
messages/calls or sync data.
As there are no suitable keycodes for this action, introduce a new one.
Signed-off-by: Illia Ostapyshyn <illia@yshyn.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20241114173930.44983-2-illia@yshyn.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53078a736f ]
The new ASUS ProArt 16" laptop series come with their keyboards stuck in
an Out-Of-Box-Experience mode. While in this mode most functions will
not work such as LED control or Fn key combos. The correct init sequence
is now done to disable this OOBE.
This patch addresses only the ProArt series so far and it is unknown if
there may be others, in which case a new quirk may be required.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Co-developed-by: Connor Belli <connorbelli2003@gmail.com>
Signed-off-by: Connor Belli <connorbelli2003@gmail.com>
Tested-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e61e6c415b ]
The overflow_work is using system wq to do overflow checks and updates
for PHC device timecounter, which might be overhelmed by other tasks.
But there is dedicated kthread in PTP subsystem designed for such
things. This patch changes the work queue to proper align with PTP
subsystem and to avoid overloading system work queue.
The adjfine() function acts the same way as overflow check worker,
we can postpone ptp aux worker till the next overflow period after
adjfine() was called.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250107104812.380225-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df7c8e3dde ]
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22e5c7ae12 ]
Panels using a PWM-controlled backlight source do not have a standard
way to communicate their valid PWM ranges.
On x86 the ranges are read from ACPI through driver-specific tables.
The built-in ranges are not necessarily correct, or may grow stale if an
older device can be retrofitted with newer panels.
Add a quirk infrastructure with which the minimum valid backlight value
can be maintained as part of the kernel.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111-amdgpu-min-backlight-quirk-v7-1-f662851fda69@weissschuh.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
