[ Upstream commit 424648c383 ]
VALU instructions with SGPR source need wait states to avoid hazard
with SALU using different SGPR.
v2: Eliminate some hazards to reduce code explosion
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7e0459d453)
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd82f29ec5 ]
GFX 12 does not require a page size cap for the trap handler because
it does not require a CWSR work around like GFX 11 did.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3603996432 ]
DMA areas are not necessarily backed by struct page, so we cannot
rely on it for deferred I/O. Allocate a shadow buffer for drivers
that require deferred I/O and use it as framebuffer memory.
Fixes driver errors about being "Unable to handle kernel NULL pointer
dereference at virtual address" or "Unable to handle kernel paging
request at virtual address".
The patch splits drm_fbdev_dma_driver_fbdev_probe() in an initial
allocation, which creates the DMA-backed buffer object, and a tail
that sets up the fbdev data structures. There is a tail function for
direct memory mappings and a tail function for deferred I/O with
the shadow buffer.
It is no longer possible to use deferred I/O without shadow buffer.
It can be re-added if there exists a reliably test for usable struct
page in the allocated DMA-backed buffer object.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: Nuno Gonçalves <nunojpg@gmail.com>
CLoses: https://lore.kernel.org/dri-devel/CAEXMXLR55DziAMbv_+2hmLeH-jP96pmit6nhs6siB22cpQFr9w@mail.gmail.com/
Tested-by: Nuno Gonçalves <nunojpg@gmail.com>
Fixes: 5ab91447aa ("drm/tiny/ili9225: Use fbdev-dma")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.11+
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241211090643.74250-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df9cf852ca ]
Widebus allows the DP controller to operate in 2 pixel per clock mode.
The mode validation logic validates the mode->clock against the max
DP pixel clock. However the max DP pixel clock limit assumes widebus
is already enabled. Adjust the mode validation logic to only compare
the adjusted pixel clock which accounts for widebus against the max DP
pixel clock. Also fix the mode validation logic for YUV420 modes as in
that case as well, only half the pixel clock is needed.
Cc: stable@vger.kernel.org
Fixes: 757a2f36ab ("drm/msm/dp: enable widebus feature for display port")
Fixes: 6db6e56065 ("drm/msm/dp: change clock related programming for YUV420 over DP")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dale Whinham <daleyo@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/635789/
Link: https://lore.kernel.org/r/20250206-dp-widebus-fix-v2-1-cb89a0313286@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e977499820 ]
The top of stolen memory is WOPCM, which shouldn't be accessed. Remove
this portion from the stolen memory region for discrete platforms.
This was already done for integrated, but was missing for discrete
platforms.
This also moves get_wopcm_size() so detect_bar2_dgfx() and
detect_bar2_integrated can use the same function.
v2: Improve commit message and suitable stable version tag(Lucas)
Fixes: d8b52a02cb ("drm/xe: Implement stolen memory.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: stable@vger.kernel.org # v6.11+
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210143654.2076747-1-nirmoy.das@intel.com
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
(cherry picked from commit 2c7f45cc7e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8724a5380c upstream.
[WHAT]
Severe video playback corruption is observed in the following setup:
weston 14.0.90 (built from source) + mpv v0.40.0 with command:
mpv bbb_sunflower_1080p_60fps_normal.mp4 --vo=gpu
[HOW]
ABGR16161616 needs to be included in dml2/2.1 translation.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d023de809f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebe4354270 upstream.
Use the amdgpu fence container so we can store additional
data in the fence. This also fixes the start_time handling
for MCBP since we were casting the fence to an amdgpu_fence
and it wasn't.
Fixes: 3f4c175d62 ("drm/amdgpu: MCBP based on DRM scheduler (v9)")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf1cd14f9e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3b16f3f2 upstream.
This commit makes two key fixes to SDMA v4.4.2 handling:
1. disable UTC_L1 in sdma_cntl register when stopping SDMA engines
by reading the current value before modifying UTC_L1_ENABLE bit.
2. Ensure UTC_L1_ENABLE is consistently managed by:
- Adding the missing register write when enabling UTC_L1 during start
- Keeping UTC_L1 enabled by default as per hardware requirements
v2: Correct SDMA_CNTL setting (Philip)
Suggested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 375bf56465)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a39d082c35 upstream.
When the GuC fails to load we declare the device wedged. However, the
very first GuC load attempt on GT0 (from xe_gt_init_hwconfig) is done
before the GT1 GuC objects are initialized, so things go bad when the
wedge code attempts to cleanup GT1. To fix this, check the initialization
status in the functions called during wedge.
Fixes: 7dbe8af13c ("drm/xe: Wedge the entire device")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: stable@vger.kernel.org # v6.12+: 1e1981b16b: drm/xe: Fix taking invalid lock on wedge
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250611214453.1159846-2-daniele.ceraolospurio@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 0b93b7dcd9)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e1981b16b upstream.
If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe]
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250402-warn-after-wedge-v1-1-93e971511fa5@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87a15c89d8 upstream.
It should rather use xe_map_memset() as the BO is created with
XE_BO_FLAG_VRAM_IF_DGFX in xe_guc_pc_init().
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250612-vmap-vaddr-v1-1-26238ed443eb@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 21cf47d89f)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b669507b63 upstream.
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 79db43611f)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e824747cf upstream.
Daniele noticed that the fix in commit 2d2be279f1 ("drm/xe: fix UAF
around queue destruction") looks to have been unintentionally removed as
part of handling a conflict in some past merge commit. Add it back.
Fixes: ac44ff7cec ("Merge tag 'drm-xe-fixes-2024-10-10' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes")
Reported-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.12+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250603174213.1543579-2-matthew.auld@intel.com
(cherry picked from commit 9d9fca62dc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ee54d5cac upstream.
Customer is reporting a really subtle issue where we get random DMAR
faults, hangs and other nasties for kernel migration jobs when stressing
stuff like s2idle/s3/s4. The explosions seems to happen somewhere
after resuming the system with splats looking something like:
PM: suspend exit
rfkill: input handler disabled
xe 0000:00:02.0: [drm] GT0: Engine reset: engine_class=bcs, logical_mask: 0x2, guc_id=0
xe 0000:00:02.0: [drm] GT0: Timedout job: seqno=24496, lrc_seqno=24496, guc_id=0, flags=0x13 in no process [-1]
xe 0000:00:02.0: [drm] GT0: Kernel-submitted job timed out
The likely cause appears to be a race between suspend cancelling the
worker that processes the free_job()'s, such that we still have pending
jobs to be freed after the cancel. Following from this, on resume the
pending_list will now contain at least one already complete job, but it
looks like we call drm_sched_resubmit_jobs(), which will then call
run_job() on everything still on the pending_list. But if the job was
already complete, then all the resources tied to the job, like the bb
itself, any memory that is being accessed, the iommu mappings etc. might
be long gone since those are usually tied to the fence signalling.
This scenario can be seen in ftrace when running a slightly modified
xe_pm IGT (kernel was only modified to inject artificial latency into
free_job to make the race easier to hit):
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_exec_queue_stop: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=1, guc_state=0x0, flags=0x4
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=0, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 1:0x1, gt=1, width=1, guc_id=1, guc_state=0x0, flags=0x3
xe_exec_queue_stop: dev=0000:00:02.0, 4:0x1, gt=1, width=1, guc_id=2, guc_state=0x0, flags=0x3
xe_exec_queue_resubmit: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x0, flags=0x13
xe_sched_job_run: dev=0000:00:02.0, fence=0xffff888276cc8540, seqno=0, lrc_seqno=0, gt=0, guc_id=0, batch_addr=0x000000146910 ...
.....
xe_exec_queue_memory_cat_error: dev=0000:00:02.0, 3:0x2, gt=0, width=1, guc_id=0, guc_state=0x3, flags=0x13
So the job_run() is clearly triggered twice for the same job, even
though the first must have already signalled to completion during
suspend. We can also see a CAT error after the re-submit.
To prevent this only resubmit jobs on the pending_list that have not yet
signalled.
v2:
- Make sure to re-arm the fence callbacks with sched_start().
v3 (Matt B):
- Stop using drm_sched_resubmit_jobs(), which appears to be deprecated
and just open-code a simple loop such that we skip calling run_job()
on anything already signalled.
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4856
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20250528113328.289392-2-matthew.auld@intel.com
(cherry picked from commit 38fafa9f39)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a63e99b4d6 upstream.
In xe_vm_close_and_put() we need to be able to call
flush_work(rebind_work), however during vm creation we can call this on
the error path, before having actually set up the worker, leading to a
splat from flush_work().
It looks like we can simply move the worker init step earlier to fix
this.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250514152424.149591-3-matthew.auld@intel.com
(cherry picked from commit 96af397aa1)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 893f07452b upstream.
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d2f6b4e4c upstream.
The drm_mm allocator tolerated being passed end > mm->size, but the
drm_buddy allocator does not.
Restore the pre-buddy-allocator behavior of allowing such placements.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3448
Signed-off-by: John Olender <john.olender@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3e9826a22 upstream.
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # v5.8
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47c03e6660 upstream.
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
[0]: See section 12.6.5.7.3 "Start-up Procedure" in J721E SoC TRM
TRM Link: http://www.ti.com/lit/pdf/spruil1
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Tested-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-6-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6a7ef0d48 upstream.
Check for the return value of the phy_mipi_dphy_get_default_config()
call, and in case of an error, return back the same.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-5-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 688eb4d465 upstream.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
Fix that.
Fixes: e19233955d ("drm/bridge: Add Cadence DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-2-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd2611c13f upstream.
The driver code doesn't have a Phy de-initialization path as yet, and so
it does not clear the phy_initialized flag while suspending. This is a
problem because after resume the driver looks at this flag to determine
if a Phy re-initialization is required or not. It is in fact required
because the hardware is resuming from a suspend, but the driver does not
carry out any re-initialization causing the D-Phy to not work at all.
Call the counterparts of phy_init() and phy_power_on(), that are
phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear
the flags so that the Phy can be initialized again when required.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-3-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 132bdcec39 upstream.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Cc: stable@vger.kernel.org
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250329113925.68204-4-aradhya.bhatia@linux.dev
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfb05257ae upstream.
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220e)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b71717735b upstream.
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:
Unable to handle kernel paging request at virtual address 0000000000014110
pc : a6xx_gpu_busy+0x1c/0x58 [msm]
lr : msm_devfreq_get_dev_status+0xbc/0x140 [msm]
Call trace:
a6xx_gpu_busy+0x1c/0x58 [msm] (P)
devfreq_simple_ondemand_func+0x3c/0x150
devfreq_update_target+0x44/0xd8
qos_max_notifier_call+0x30/0x84
blocking_notifier_call_chain+0x6c/0xa0
pm_qos_update_target+0xd0/0x110
freq_qos_apply+0x3c/0x74
apply_constraint+0x88/0x148
__dev_pm_qos_update_request+0x7c/0xcc
dev_pm_qos_update_request+0x38/0x5c
devfreq_cooling_set_cur_state+0x98/0xf0
__thermal_cdev_update+0x64/0xb4
thermal_cdev_update+0x4c/0x58
step_wise_manage+0x1f0/0x318
__thermal_zone_device_update+0x278/0x424
__thermal_cooling_device_register+0x2bc/0x308
thermal_of_cooling_device_register+0x10/0x1c
of_devfreq_cooling_register_power+0x240/0x2bc
of_devfreq_cooling_register+0x14/0x20
msm_devfreq_init+0xc4/0x1a0 [msm]
msm_gpu_init+0x304/0x574 [msm]
adreno_gpu_init+0x1c4/0x2e0 [msm]
a6xx_gpu_init+0x5c8/0x9c8 [msm]
adreno_bind+0x2a8/0x33c [msm]
...
At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.
Fix this by setting df->suspended correctly during initialization.
Cc: stable@vger.kernel.org
Fixes: 6694482a70 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff9cb6d203 upstream.
Disconnecting a DisplayLink device results in the following kernel
error messages
[ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
[ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1a981bd55 ("drm/udl: drop drm_driver.release hook")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 780351a5f6 upstream.
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae4 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ff4fdf4f4 upstream.
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 61ee19dedb upstream.
Commit 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still
active") ensured that active jobs are returned to the pending list when
extending the timeout. However, it didn't use the pending list's lock to
manipulate the list, which causes a race condition as the scheduler's
workqueues are running.
Hold the lock while manipulating the scheduler's pending list to prevent
a race.
Cc: stable@vger.kernel.org
Fixes: 704d3d60fe ("drm/etnaviv: don't block scheduler when GPU is still active")
Reported-by: Philipp Stanner <phasta@kernel.org>
Closes: https://lore.kernel.org/dri-devel/964e59ba1539083ef29b06d3c78f5e2e9b138ab8.camel@mailbox.org/
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250602132240.93314-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bfb389a01 upstream.
Do not set CR1B[6] when programming the pitch. The bit effects VGA
text mode and is not interpreted by qemu. [1] It has no affect on
the scanline pitch.
The scanline bit that is set into CR1B[6] belongs into CR13[7], which
the driver sets up correctly.
This bug goes back to the driver's initial commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://gitlab.com/qemu-project/qemu/-/blob/stable-9.2/hw/display/cirrus_vga.c?ref_type=heads#L1112 # 1
Fixes: f9aa76a852 ("drm/kms: driver for virtual cirrus under qemu")
Cc: Adam Jackson <ajax@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v3.5+
Link: https://lore.kernel.org/r/20250328091821.195061-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cce65f378 upstream.
The ast driver protects the commit tail against concurrent reads
of the display modes by acquiring a lock. The comment is misleading
as the lock is not released in atomic_flush, but at the end of the
commit-tail helper. Rewrite the comment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 1fe1821549 ("drm/ast: Acquire I/O-register lock in atomic_commit_tail function")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20250324094520.192974-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 55e8ff8420 ]
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d1f7b15cb ]
Do not create a custom directory in debugfs-root, but use the
debugfs_init callback to create a custom directory at the given place
for the bridge. The new directory layout looks like this on a Renesas
GrayHawk-Single with a R-Car V4M SoC:
/sys/kernel/debug/dri/feb00000.display/DP-1/1-002c
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250315201651.7339-2-wsa+renesas@sang-engineering.com
Stable-dep-of: 55e8ff8420 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d02b2103a0 ]
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73eab78721 ]
commit 017fbb6690 ("drm/amdgpu/discovery: check ip_discovery fw file
available") added support for reading an amdgpu IP discovery bin file
for some specific products. If it's not found then it will fallback to
hardcoded values. However if it's not found there is also a lot of noise
about missing files and errors.
Adjust the error handling to decrease most messages to DEBUG and to show
users less about missing files.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312
Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Fixes: 017fbb6690 ("drm/amdgpu/discovery: check ip_discovery fw file available")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49f1f9f6c3)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80a0e82829 ]
On chips without native IP discovery support, use the fw binary
if available, otherwise we can continue without it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 73eab78721 ("drm/amd: Adjust output for discovery error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6220729347 upstream.
Add check for the return value of alloc_ordered_workqueue()
in xe_display_create() to catch potential exception.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5b62d63395)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed5915cfce ]
This reverts commit d6e0208196.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] 93c07d9b4b
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25eeba495b ]
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e0208196)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Stable-dep-of: ed5915cfce ("Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 471db2c2d4 ]
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515020713.1110476-1-lincao12@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a359288ccb ]
To unmap and free seq64 memory when drm node close to free vm, if there
is signal accepted, then taking vm lock failed and leaking seq64 va
mapping, and then dmesg has error log "still active bo inside vm".
Change to use uninterruptible lock fix the mapping leaking and no dmesg
error log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90237b16ec ]
This patch is to fix a kfd_prcess ref leak.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d105577a ]
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to verify
all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v4
- Rebase fix
v5
- return unsigned int for xe_force_wake_get()
- remove redundant XE_WARN_ON()
v6
- use helper for checking all initialized domains are awake or not.
v7
- Fix commit message
v9
- Remove redundant WARN_ON (Badal)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-10-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stable-dep-of: 16c1241b08 ("drm/xe/bmg: Update Wa_16023588340")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501d799a47 ]
The system is turning off, and we should probably put the device
in a safe power state. We don't need to evict VRAM or suspend running
jobs to a safe state, as the device is rebooted anyway.
This does not imply the system is necessarily reset, as we can
kexec into a new kernel. Without shutting down, things like
USB Type-C may mysteriously start failing.
References: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3500
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add !xe_driver_flr_disabled assert]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-4-maarten.lankhorst@linux.intel.com
Stable-dep-of: 16c1241b08 ("drm/xe/bmg: Update Wa_16023588340")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7137b1825 ]
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
(cherry picked from commit 686d773186)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
