[ Upstream commit 4be7599d6b ]
Add handling for MPI26_SAS_NEG_LINK_RATE_22_5 in
_transport_convert_phy_link_rate(). This maps the new 22.5 Gbps
negotiated rate to SAS_LINK_RATE_22_5_GBPS, to get correct PHY link
speeds.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Message-Id: <20250922095113.281484-4-ranjan.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 072fdd4b0b ]
The fc_ct_ms_fill() helper currently formats the OS name and version
into entry->value using "%s v%s". Since init_utsname()->sysname and
->release are unbounded strings, snprintf() may attempt to write more
than FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN bytes, triggering a
-Wformat-truncation warning with W=1.
In file included from drivers/scsi/libfc/fc_elsct.c:18:
drivers/scsi/libfc/fc_encode.h: In function ‘fc_ct_ms_fill.constprop’:
drivers/scsi/libfc/fc_encode.h:359:30: error: ‘%s’ directive output may
be truncated writing up to 64 bytes into a region of size between 62
and 126 [-Werror=format-truncation=]
359 | "%s v%s",
| ^~
360 | init_utsname()->sysname,
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/libfc/fc_encode.h:357:17: note: ‘snprintf’ output between
3 and 131 bytes into a destination of size 128
357 | snprintf((char *)&entry->value,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
358 | FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
359 | "%s v%s",
| ~~~~~~~~~
360 | init_utsname()->sysname,
| ~~~~~~~~~~~~~~~~~~~~~~~~
361 | init_utsname()->release);
| ~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by using "%.62s v%.62s", which ensures sysname and release are
truncated to fit within the 128-byte field defined by
FC_FDMI_HBA_ATTR_OSNAMEVERSION_LEN.
[mkp: clarified commit description]
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bf81856a4 ]
There is a timing race condition when a PRLI may be sent on the wire
before PLOGI_ACC in Point to Point topology. Fix by deferring REG_RPI
mbox completion handling to after PLOGI_ACC's CQE completion. Because
the discovery state machine only sends PRLI after REG_RPI mbox
completion, PRLI is now guaranteed to be sent after PLOGI_ACC.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-8-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5de09770b1 ]
To assist in debugging lpfc_xri_rebalancing driver parameter, a debugfs
entry is used. The debugfs file operations for xri rebalancing have
been previously implemented, but lack definition for its information
buffer size. Similar to other pre-existing debugfs entry buffers,
define LPFC_HDWQINFO_SIZE as 8192 bytes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-9-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4809b98eb ]
In lpfc_cleanup, there is an extraneous nlp_put for NPIV ports on the
F_Port_Ctrl ndlp object. In cases when an ABTS is issued, the
outstanding kref is needed for when a second XRI_ABORTED CQE is
received. The final kref for the ndlp is designed to be decremented in
lpfc_sli4_els_xri_aborted instead. Also, add a new log message to allow
for future diagnostics when debugging related issues.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-5-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f408dde246 ]
If lpfc_reset_flush_io_context fails to execute, then the wrong return
status code may be passed back to upper layers when issuing a target
reset TMF command. Fix by checking the return status from
lpfc_reset_flush_io_context() first in order to properly return FAILED
or FAST_IO_FAIL.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-7-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5bf6d681f ]
The kref for Fabric_DID ndlps is not decremented after repeated FDISC
failures and exhausting maximum allowed retries. This can leave the
ndlp lingering unnecessarily. Add a test and set bit operation for the
NLP_DROPPED flag. If not previously set, then a kref is decremented. The
ndlp is freed when the remaining reference for the completing ELS is
put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-6-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 803dfd83df ]
lpfc_sli4_queue_setup() does not allocate memory and is used for
submitting CREATE_QUEUE mailbox commands. Thus, if such mailbox
commands fail we should clean up by also freeing the memory allocated
for the queues with lpfc_sli4_queue_destroy(). Change the intended
clean up label for the lpfc_sli4_queue_setup() error case to
out_destroy_queue.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-4-justintee8345@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee3554d1a ]
Use int instead of u32 for 'ret' variable to store negative error codes
returned by PM8001_CHIP_DISP->set_nvmd_req().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6477ee38c ]
Eliminate the use of static variables within the log pull implementation
to resolve a race condition and prevent data gaps when pulling logs from
multiple controllers in parallel, ensuring each operation is properly
isolated.
Signed-off-by: Francisco Gutierrez <frankramirez@google.com>
Link: https://lore.kernel.org/r/20250723183543.1443301-1-frankramirez@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 829fa1582b ]
Firmware can enter a transient fault while creating operational queues.
The driver fails the load immediately.
Add a retry loop that checks controller status and history bit after
queue creation. If either indicates a fault, retry init up to a set
limit before failing.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7b2176e30 ]
I/Os can race with controller reset and fail.
Block requests at the mid layer when reset starts using
scsi_host_block(), and resume with scsi_host_unblock() after reset
completes.
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250820084138.228471-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45bc82563d ]
After a Fatal Error has been reported by a device and has been recovered
through a Secondary Bus Reset, AER updates the device's error_state to
pci_channel_io_normal before invoking its driver's ->resume() callback.
By contrast, EEH updates the error_state earlier, namely after resetting
the device and before invoking its driver's ->slot_reset() callback.
Commit c58dc575f3 ("powerpc/pseries: Set error_state to
pci_channel_io_normal in eeh_report_reset()") explains in great detail
that the earlier invocation is necessitated by various drivers checking
accessibility of the device with pci_channel_offline() and avoiding
accesses if it returns true. It returns true for any other error_state
than pci_channel_io_normal.
The device should be accessible already after reset, hence the reasoning
is that it's safe to update the error_state immediately afterwards.
This deviation between AER and EEH seems problematic because drivers
behave differently depending on which error recovery mechanism the
platform uses. Three drivers have gone so far as to update the
error_state themselves, presumably to work around AER's behavior.
For consistency, amend AER to update the error_state at the same recovery
steps as EEH. Drop the now unnecessary workaround from the three drivers.
Keep updating the error_state before ->resume() in case ->error_detected()
or ->mmio_enabled() return PCI_ERS_RESULT_RECOVERED, which causes
->slot_reset() to be skipped. There are drivers doing this even for Fatal
Errors, e.g. mhi_pci_error_detected().
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/4517af6359ffb9d66152b827a5d2833459144e3f.1755008151.git.lukas@wunner.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b5f717b31b upstream.
A build warning was triggered due to excessive stack usage in
sd_revalidate_disk():
drivers/scsi/sd.c: In function ‘sd_revalidate_disk.isra’:
drivers/scsi/sd.c:3824:1: warning: the frame size of 1160 bytes is larger than 1024 bytes [-Wframe-larger-than=]
This is caused by a large local struct queue_limits (~400B) allocated on
the stack. Replacing it with a heap allocation using kmalloc()
significantly reduces frame usage. Kernel stack is limited (~8 KB), and
allocating large structs on the stack is discouraged. As the function
already performs heap allocations (e.g. for buffer), this change fits
well.
Fixes: 804e498e04 ("sd: convert to the atomic queue limits API")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Abinash Singh <abinashsinghlalotra@gmail.com>
Link: https://lore.kernel.org/r/20250825183940.13211-2-abinashsinghlalotra@gmail.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b81296591c upstream.
Replace kmalloc() followed by copy_from_user() with memdup_user() to fix
a memory leak that occurs when copy_from_user(buff[sg_used],,) fails and
the 'cleanup1:' path does not free the memory for 'buff[sg_used]'. Using
memdup_user() avoids this by freeing the memory internally.
Since memdup_user() already allocates memory, use kzalloc() in the else
branch instead of manually zeroing 'buff[sg_used]' using memset(0).
Cc: stable@vger.kernel.org
Fixes: edd163687e ("[SCSI] hpsa: add driver for HP Smart Array controllers.")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 60cd16a3b7 ]
During the detaching of Marvell's SAS/SATA controller, the original code
calls cancel_delayed_work() in mvs_free() to cancel the delayed work
item mwq->work_q. However, if mwq->work_q is already running, the
cancel_delayed_work() may fail to cancel it. This can lead to
use-after-free scenarios where mvs_free() frees the mvs_info while
mvs_work_queue() is still executing and attempts to access the
already-freed mvs_info.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
mvs_pci_remove() |
mvs_free() | mvs_work_queue()
cancel_delayed_work() |
kfree(mvi) |
| mvi-> // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing
delayed work item completes before the mvs_info is deallocated.
This bug was found by static analysis.
Fixes: 20b09c2992 ("[SCSI] mvsas: add support for 94xx; layout change; bug fixes")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9877c004e9 ]
Change the error code EAGAIN to -EAGAIN in qla_nvme_xmt_ls_rsp() to
align with qla2x00_start_sp() returning negative error codes or
QLA_SUCCESS, preventing logical errors.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-4-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f037e3acd ]
Change the error code EAGAIN to -EAGAIN in START_SP_W_RETRIES() to align
with qla2x00_start_sp() returning negative error codes or QLA_SUCCESS,
preventing logical errors. Additionally, the '_rval' variable should
store negative error codes to conform to Linux kernel error code
conventions.
Fixes: 9803fb5d27 ("scsi: qla2xxx: Fix task management cmd failure")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-3-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 066b8f3fa8 ]
Change the error code EAGAIN to -EAGAIN in qla24xx_sadb_update() and
qla_edif_process_els() to align with qla2x00_start_sp() returning
negative error codes or QLA_SUCCESS, preventing logical errors.
Fixes: 0b3f3143d4 ("scsi: qla2xxx: edif: Add retry for ELS passthrough")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Message-ID: <20250905075446.381139-2-rongqianfeng@vivo.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb35b1ffc ]
Check for NULL return value with dma_alloc_coherent(), because DMA
address is not always set by dma_alloc_coherent() on failure.
Fixes: 7726618639 ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250725083112.43975-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 251be2f603 ]
Since commit f7b705c238 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached.
Fixes: f7b705c238 ("scsi: pm80xx: Set phy_attached to zero when device is gone")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 708e2371f7 ]
Reinstate the rotational media flag for the CD-ROM driver. The flag has
been cleared since commit bd4a633b6f ("block: move the nonrot flag to
queue_limits") and this breaks some applications.
Move queue limit configuration from get_sectorsize() to
sr_revalidate_disk() and set the rotational flag.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: bd4a633b6f ("block: move the nonrot flag to queue_limits")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250827113550.2614535-1-ming.lei@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa427d7b73 ]
Add a helper that freezes the queue, updates the queue limits and
unfreezes the queue and convert all open coded versions of that to the
new helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250110054726.1499538-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 708e2371f7 ("scsi: sr: Reinstate rotational media flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9dba9a45c3 upstream.
Fix a use-after-free window by correcting the buffer release sequence in
the deferred receive path. The code freed the RQ buffer first and only
then cleared the context pointer under the lock. Concurrent paths (e.g.,
ABTS and the repost path) also inspect and release the same pointer under
the lock, so the old order could lead to double-free/UAF.
Note that the repost path already uses the correct pattern: detach the
pointer under the lock, then free it after dropping the lock. The
deferred path should do the same.
Fixes: 472e146d1c ("scsi: lpfc: Correct upcalling nvmet_fc transport during io done downcall")
Cc: stable@vger.kernel.org
Signed-off-by: John Evans <evans1210144@gmail.com>
Link: https://lore.kernel.org/r/20250828044008.743-1-evans1210144@gmail.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a2f54ff15c ]
The SCSI sysfs attributes "supported_mode" and "active_mode" do not
define a store method and thus cannot be modified. Correct the
DEVICE_ATTR() call for these two attributes to not include S_IWUSR to
allow write access as they are read-only.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250728041700.76660-1-dlemoal@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Johannes Thumshin <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dcf111dd3 ]
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a1 ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c91e140c82 ]
On 32-bit systems, 64-bit BAR writes to admin queue registers are
performed as two 32-bit writes. Without locking, this can cause partial
writes when accessed concurrently.
Updated per-queue spinlocks is used to serialize these writes and prevent
race conditions.
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6853885b21 ]
The volatile qualifier is redundant for __iomem pointers.
Cleaned up usage in mpi3mr_writeq() and sysif_regs pointer as per
Upstream compliance.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: c91e140c82 ("scsi: mpi3mr: Serialize admin queue BAR writes on 32-bit systems")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8604f633f5 upstream.
scsi_check_passthrough() is always called, but it doesn't check for if a
command completed successfully. As a result, if a command was successful and
the caller used SCMD_FAILURE_RESULT_ANY to indicate what failures it wanted
to retry, we will end up retrying the command. This will cause delays during
device discovery because of the command being sent multiple times. For some
USB devices it can also cause the wrong device size to be used.
This patch adds a check for if the command was successful. If it is we
return immediately instead of trying to match a failure.
Fixes: 994724e6b3 ("scsi: core: Allow passthrough to request midlayer retries")
Reported-by: Kris Karas <bugs-a21@moonlit-rail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219652
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250107010220.7215-1-michael.christie@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6327c4acf upstream.
The "is_waiting" flag was updated after calling complete(), which could
lead to a race where the waiting thread wakes up before the flag is
cleared. This may cause a missed wakeup or stale state check.
Reorder the operations to update "is_waiting" before signaling completion
to ensure consistent state.
Fixes: 824a156633 ("scsi: mpi3mr: Base driver code")
Cc: stable@vger.kernel.org
Co-developed-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250627194539.48851-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dafeaf2c03 ]
When PCI_IRQ_AFFINITY is set for calling pci_alloc_irq_vectors(), it
means interrupts are spread around the available CPUs. It also means that
the interrupts become managed, which means that an interrupt is shutdown
when all the CPUs in the interrupt affinity mask go offline.
Using managed interrupts in this way means that we should ensure that
completions should not occur on HW queues where the associated interrupt
is shutdown. This is typically achieved by ensuring only CPUs which are
online can generate IO completion traffic to the HW queue which they are
mapped to (so that they can also serve completion interrupts for that HW
queue).
The problem in the driver is that a CPU can generate completions to a HW
queue whose interrupt may be shutdown, as the CPUs in the HW queue
interrupt affinity mask may be offline. This can cause IOs to never
complete and hang the system. The driver maintains its own CPU <-> HW
queue mapping for submissions, see aac_fib_vector_assign(), but this does
not reflect the CPU <-> HW queue interrupt affinity mapping.
Commit 9dc704dcc0 ("scsi: aacraid: Reply queue mapping to CPUs based on
IRQ affinity") tried to remedy this issue may mapping CPUs properly to HW
queue interrupts. However this was later reverted in commit c5becf57dd
("Revert "scsi: aacraid: Reply queue mapping to CPUs based on IRQ
affinity") - it seems that there were other reports of hangs. I guess
that this was due to some implementation issue in the original commit or
maybe a HW issue.
Fix the very original hang by just not using managed interrupts by not
setting PCI_IRQ_AFFINITY. In this way, all CPUs will be in each HW queue
affinity mask, so should not create completion problems if any CPUs go
offline.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250715111535.499853-1-john.g.garry@oracle.com
Closes: https://lore.kernel.org/linux-scsi/20250618192427.3845724-1-jmeneghi@redhat.com/
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37c4e72b06 ]
sas_user_scan() did not fully process wildcard channel scans
(SCAN_WILD_CARD) when a transport-specific user_scan() callback was
present. Only channel 0 would be scanned via user_scan(), while the
remaining channels were skipped, potentially missing devices.
user_scan() invokes updated sas_user_scan() for channel 0, and if
successful, iteratively scans remaining channels (1 to
shost->max_channel) via scsi_scan_host_selected(). This ensures complete
wildcard scanning without affecting transport-specific scanning behavior.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20250624061649.17990-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04caad5a7b ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpi3mr driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
mpi3mr_process_op_reply_desc() always forces a retry of commands
terminated with the status MPI3_IOCSTATUS_SCSI_IOC_TERMINATED using the
SCSI result DID_SOFT_ERROR, regardless of the ioc_loginfo for the
command. This correctly forces the retry of collateral NCQ abort
commands, but with the retry counter for the command being incremented.
If a command to an ATA device is subject to too many retries due to other
NCQ commands failing (e.g. read commands trying to access unreadable
sectors), the collateral NCQ abort commands may be terminated with an
error as they run out of retries. This violates the SAT specification and
causes hard-to-debug command errors.
Solve this issue by modifying the handling of the
MPI3_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command ioc_loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-2-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15592a11d5 ]
With the ATA error model, an NCQ command failure always triggers an abort
(termination) of all NCQ commands queued on the device. In such case, the
SAT or the host must handle the failed command according to the command
sense data and immediately retry all other NCQ commands that were aborted
due to the failed NCQ command.
For SAS HBAs controlled by the mpt3sas driver, NCQ command aborts are not
handled by the HBA SAT and sent back to the host, with an ioc log
information equal to 0x31080000 (IOC_LOGINFO_PREFIX_PL with the PL code
PL_LOGINFO_CODE_SATA_NCQ_FAIL_ALL_CMDS_AFTR_ERR). The function
_scsih_io_done() always forces a retry of commands terminated with the
status MPI2_IOCSTATUS_SCSI_IOC_TERMINATED using the SCSI result
DID_SOFT_ERROR, regardless of the log_info for the command. This
correctly forces the retry of collateral NCQ abort commands, but with the
retry counter for the command being incremented. If a command to an ATA
device is subject to too many retries due to other NCQ commands failing
(e.g. read commands trying to access unreadable sectors), the collateral
NCQ abort commands may be terminated with an error as they run out of
retries. This violates the SAT specification and causes hard-to-debug
command errors.
Solve this issue by modifying the handling of the
MPI2_IOCSTATUS_SCSI_IOC_TERMINATED status to check if a command is for an
ATA device and if the command loginfo indicates an NCQ collateral
abort. If that is the case, force the command retry using the SCSI result
DID_IMM_RETRY to avoid incrementing the command retry count.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250606052747.742998-3-dlemoal@kernel.org
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6698796282 ]
If a call to lpfc_sli4_read_rev() from lpfc_sli4_hba_setup() fails, the
resultant cleanup routine lpfc_sli4_vport_delete_fcp_xri_aborted() may
occur before sli4_hba.hdwqs are allocated. This may result in a null
pointer dereference when attempting to take the abts_io_buf_list_lock for
the first hardware queue. Fix by adding a null ptr check on
phba->sli4_hba.hdwq and early return because this situation means there
must have been an error during port initialization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cced5779e ]
For SLI3, the HBA_SETUP flag is never set so the lpfc_dev_loss_tmo_callbk
always early returns. Add a phba->sli_rev check for SLI4 mode so that
the SLI3 path can flow through the original dev_loss_tmo worker thread
design to lpfc_dev_loss_tmo_handler instead of early return.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250618192138.124116-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add4c48503 ]
When the bfad_im_probe() function fails during initialization, the memory
pointed to by bfad->im is freed without setting bfad->im to NULL.
Subsequently, during driver uninstallation, when the state machine enters
the bfad_sm_stopping state and calls the bfad_im_probe_undo() function,
it attempts to free the memory pointed to by bfad->im again, thereby
triggering a double-free vulnerability.
Set bfad->im to NULL if probing fails.
Signed-off-by: jackysliu <1972843537@qq.com>
Link: https://lore.kernel.org/r/tencent_3BB950D6D2D470976F55FC879206DE0B9A09@qq.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ea3a256ed ]
In case of an ib_fast_reg_mr allocation failure during iSER setup, the
machine hits a panic because iscsi_conn->dd_data is initialized
unconditionally, even when no memory is allocated (dd_size == 0). This
leads invalid pointer dereference during connection teardown.
Fix by setting iscsi_conn->dd_data only if memory is actually allocated.
Panic trace:
------------
iser: iser_create_fastreg_desc: Failed to allocate ib_fast_reg_mr err=-12
iser: iser_alloc_rx_descriptors: failed allocating rx descriptors / data buffers
BUG: unable to handle page fault for address: fffffffffffffff8
RIP: 0010:swake_up_locked.part.5+0xa/0x40
Call Trace:
complete+0x31/0x40
iscsi_iser_conn_stop+0x88/0xb0 [ib_iser]
iscsi_stop_conn+0x66/0xc0 [scsi_transport_iscsi]
iscsi_if_stop_conn+0x14a/0x150 [scsi_transport_iscsi]
iscsi_if_rx+0x1135/0x1834 [scsi_transport_iscsi]
? netlink_lookup+0x12f/0x1b0
? netlink_deliver_tap+0x2c/0x200
netlink_unicast+0x1ab/0x280
netlink_sendmsg+0x257/0x4f0
? _copy_from_user+0x29/0x60
sock_sendmsg+0x5f/0x70
Signed-off-by: Showrya M N <showrya@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20250627112329.19763-1-showrya@chelsio.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e48727c26 ]
Commit aa3998dbeb ("ata: libata-scsi: Disable scsi device
manage_system_start_stop") enabled libata EH to manage device power mode
trasitions for system suspend/resume and removed the flag from
ata_scsi_dev_config. However, since the sd_shutdown() function still
relies on the manage_system_start_stop flag, a spin-down command is not
issued to the disk with command "echo 1 > /sys/block/sdb/device/delete"
sd_shutdown() can be called for both system/runtime start stop
operations, so utilize the manage_run_time_start_stop flag set in the
ata_scsi_dev_config and issue a spin-down command during disk removal
when the system is running. This is in addition to when the system is
powering off and manage_shutdown flag is set. The
manage_system_start_stop flag will still be used for drivers that still
set the flag.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250724214520.112927-1-salomondush@google.com
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bdc689214 ]
This reverts commit c577ab7ba5.
The invocation of iscsi_put_conn() in iscsi_iter_destory_conn_fn() is
used to free the initial reference counter of iscsi_cls_conn. For
non-qla4xxx cases, the ->destroy_conn() callback (e.g.,
iscsi_conn_teardown) will call iscsi_remove_conn() and iscsi_put_conn()
to remove the connection from the children list of session and free the
connection at last. However for qla4xxx, it is not the case. The
->destroy_conn() callback of qla4xxx will keep the connection in the
session conn_list and doesn't use iscsi_put_conn() to free the initial
reference counter. Therefore, it seems necessary to keep the
iscsi_put_conn() in the iscsi_iter_destroy_conn_fn(), otherwise, there
will be memory leak problem.
Link: https://lore.kernel.org/all/88334658-072b-4b90-a949-9c74ef93cfd1@huawei.com/
Fixes: c577ab7ba5 ("scsi: iscsi: Fix HW conn removal use after free")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Link: https://lore.kernel.org/r/20250715073926.3529456-1-lilingfeng3@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e90b38781 ]
In _mpt3sas_fw_work() the fw_event reference is removed, it should also
be freed in all cases.
Fixes: 4318c73478 ("scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware.")
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Link: https://lore.kernel.org/r/20250723153018.50518-1-thenzl@redhat.com
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 063bec4444 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: ddcc7e347a ("isci: fix dma_unmap_sg usage")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627142451.241713-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0141618727 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: b576294826 ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627134822.234813-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a988d0b65 ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 692e5d73a8 ("scsi: elx: efct: LIO backend interface routines")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250627114117.188480-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 023a293b9c ]
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 88a678bbc3 ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250630111803.94389-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 040492ac25 ]
Commit 32566a6f1a ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist
structure") introduced a regression with SLI-3 adapters (e.g. LPe12000 8Gb)
where a Link Down / Link Up such as caused by disabling an host FC switch
port would result in the devices remaining in the transport-offline state
and multipath reporting them as failed. This problem was not seen with
newer SLI-4 adapters.
The problem was caused by portions of the patch which removed the functions
__lpfc_sli_rpi_release() and lpfc_sli_rpi_release() and all their callers.
This was presumably because with the removal of the NLP_RELEASE_RPI flag
there was no need to free the rpi.
However, __lpfc_sli_rpi_release() and lpfc_sli_rpi_release() which calls it
reset the NLP_UNREG_INP flag. And, lpfc_sli_def_mbox_cmpl() has a path
where __lpfc_sli_rpi_release() was called in a particular case where
NLP_UNREG_INP was not otherwise cleared because of other conditions.
Restoring the else clause of this conditional and simply clearing the
NLP_UNREG_INP flag appears to resolve the problem with SLI-3 adapters. It
should be noted that the code path in question is not specific to SLI-3,
but there are other SLI-4 code paths which may have masked the issue.
Fixes: 32566a6f1a ("scsi: lpfc: Remove NLP_RELEASE_RPI flag from nodelist structure")
Cc: stable@vger.kernel.org
Tested-by: Marco Patalano <mpatalan@redhat.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Link: https://lore.kernel.org/r/20250317163731.356873-1-emilne@redhat.com
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5162bb6aa ]
Smatch detected a potential use-after-free of an ndlp oject in
dev_loss_tmo_callbk during driver unload or fatal error handling.
Fix by reordering code to avoid potential use-after-free if initial
nodelist reference has been previously removed.
Fixes: 4281f44ea8 ("scsi: lpfc: Prevent NDLP reference count underflow in dev_loss_tmo callback")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-scsi/41c1d855-9eb5-416f-ac12-8b61929201a3@stanley.mountain/
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20250425194806.3585-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92b99f1a73 ]
In attempt to reduce the amount of unnecessary ndlp->lock acquisitions
in the lpfc driver, change nlpa_flag into an unsigned long bitmask and
use clear_bit/test_bit bitwise atomic APIs instead of reliance on
ndlp->lock for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20241031223219.152342-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: b5162bb6aa ("scsi: lpfc: Avoid potential ndlp use-after-free in dev_loss_tmo_callbk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
