This reverts commit 25decf0469.
This software node change doesn't actually fix any current issues
with the kernel, it is an improvement to the lookup process rather
than fixing a live bug. It also causes a couple of regressions with
shipping laptops, which relied on the label based lookup.
There is a fix for the regressions in mainline, the first 5 patches
of [1]. However, those patches are fairly substantial changes and
given the patch causing the regression doesn't actually fix a bug
it seems better to just revert it in stable.
CC: stable@vger.kernel.org # 6.12, 6.17
Link: https://lore.kernel.org/linux-sound/20251120-reset-gpios-swnodes-v7-0-a100493a0f4b@linaro.org/ [1]
Closes: https://github.com/thesofproject/linux/issues/5599
Closes: https://github.com/thesofproject/linux/issues/5603
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfa0904a35 ]
[why]
1. With allow_0_dtb_clk enabled, the time required to latch DTBCLK to 600 MHz
depends on the SMU. If DTBCLK is not latched to 600 MHz before set_mode completes,
gating DTBCLK causes the DP2 sink to lose its clock source.
2. The existing DTBCLK gating sequence ungates DTBCLK based on both pix_clk and ref_dtbclk,
but gates DTBCLK when either pix_clk or ref_dtbclk is zero.
pix_clk can be zero outside the set_mode sequence before DTBCLK is properly latched,
which can lead to DTBCLK being gated by mistake.
[how]
Consider both pixel_clk and ref_dtbclk when determining when it is safe to gate DTBCLK;
this is more accurate.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4701
Fixes: 5949e7c489 ("drm/amd/display: Enable Dynamic DTBCLK Switch")
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d04eb0c402)
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1bcd679209 ]
[why]
DPP CLK enable needs to disable DPPCLK RCG first.
The DPPCLK_en in dccg should always be enabled when the corresponding
pipe is enabled.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cfa0904a35 ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ae47e971b ]
[why & how]
this is to init to HW real DTBCLK.
and use real HW DTBCLK status to update internal logic state
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cfa0904a35 ("drm/amd/display: Prevent Gating DTBCLK before It Is Properly Latched")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 678e1cc2f4 ]
xfs/286 produced this report on my test fleet:
==================================================================
BUG: KFENCE: out-of-bounds read in memcpy_orig+0x54/0x110
Out-of-bounds read at 0xffff88843fe9e038 (184B right of kfence-#184):
memcpy_orig+0x54/0x110
xrep_symlink_salvage_inline+0xb3/0xf0 [xfs]
xrep_symlink_salvage+0x100/0x110 [xfs]
xrep_symlink+0x2e/0x80 [xfs]
xrep_attempt+0x61/0x1f0 [xfs]
xfs_scrub_metadata+0x34f/0x5c0 [xfs]
xfs_ioc_scrubv_metadata+0x387/0x560 [xfs]
xfs_file_ioctl+0xe23/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
kfence-#184: 0xffff88843fe9df80-0xffff88843fe9dfea, size=107, cache=kmalloc-128
allocated by task 3470 on cpu 1 at 263329.131592s (192823.508886s ago):
xfs_init_local_fork+0x79/0xe0 [xfs]
xfs_iformat_local+0xa4/0x170 [xfs]
xfs_iformat_data_fork+0x148/0x180 [xfs]
xfs_inode_from_disk+0x2cd/0x480 [xfs]
xfs_iget+0x450/0xd60 [xfs]
xfs_bulkstat_one_int+0x6b/0x510 [xfs]
xfs_bulkstat_iwalk+0x1e/0x30 [xfs]
xfs_iwalk_ag_recs+0xdf/0x150 [xfs]
xfs_iwalk_run_callbacks+0xb9/0x190 [xfs]
xfs_iwalk_ag+0x1dc/0x2f0 [xfs]
xfs_iwalk_args.constprop.0+0x6a/0x120 [xfs]
xfs_iwalk+0xa4/0xd0 [xfs]
xfs_bulkstat+0xfa/0x170 [xfs]
xfs_ioc_fsbulkstat.isra.0+0x13a/0x230 [xfs]
xfs_file_ioctl+0xbf2/0x10e0 [xfs]
__x64_sys_ioctl+0x76/0xc0
do_syscall_64+0x4e/0x1e0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
CPU: 1 UID: 0 PID: 1300113 Comm: xfs_scrub Not tainted 6.18.0-rc4-djwx #rc4 PREEMPT(lazy) 3d744dd94e92690f00a04398d2bd8631dcef1954
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-4.module+el8.8.0+21164+ed375313 04/01/2014
==================================================================
On further analysis, I realized that the second parameter to min() is
not correct. xfs_ifork::if_bytes is the size of the xfs_ifork::if_data
buffer. if_bytes can be smaller than the data fork size because:
(a) the forkoff code tries to keep the data area as large as possible
(b) for symbolic links, if_bytes is the ondisk file size + 1
(c) forkoff is always a multiple of 8.
Case in point: for a single-byte symlink target, forkoff will be
8 but the buffer will only be 2 bytes long.
In other words, the logic here is wrong and we walk off the end of the
incore buffer. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: 2651923d8d ("xfs: online repair of symbolic links")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33ddc796ec ]
The changes modernizes the code by aligning it with current kernel best
practices. It improves code clarity and consistency, as strncpy is deprecated
as explained in Documentation/process/deprecated.rst. This change does
not alter the functionality or introduce any behavioral changes.
Suggested-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Marcelo Moreira <marcelomoreira1905@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Stable-dep-of: 678e1cc2f4 ("xfs: fix out of bounds memory read error in symlink repair")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2687d3cc9 ]
Disable Panel Replay on MST links until it's properly implemented. For
instance the required VSC SDP is not programmed on MST and FEC is not
enabled if Panel Replay is enabled.
Fixes: 3257e55d3e ("drm/i915/panelreplay: enable/disable panel replay")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15174
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251107124141.911895-1-imre.deak@intel.com
(cherry picked from commit e109f644b8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[ placed MST check at function start since DPCD read was moved to caller ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91a5409002 upstream.
maple_tree tracepoints contain pointers to function names. Such a pointer
is saved when a tracepoint logs an event. There's no guarantee that it's
still valid when the event is parsed later and the pointer is dereferenced.
The kernel warns about these unsafe pointers.
event 'ma_read' has unsafe pointer field 'fn'
WARNING: kernel/trace/trace.c:3779 at ignore_event+0x1da/0x1e4
Mark the function names as tracepoint_string() to fix the events.
One case that doesn't work without my patch would be trace-cmd record
to save the binary ringbuffer and trace-cmd report to parse it in
userspace. The address of __func__ can't be dereferenced from
userspace but tracepoint_string will add an entry to
/sys/kernel/tracing/printk_formats
Link: https://lkml.kernel.org/r/20251030155537.87972-1-martin@kaiser.cx
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Below is a patch for 6.12.58+ and 6.17.8+ stable branches only.
Upstream does not need this.
Signed-off-by: Jari Ruusu <jariruusu@protonmail.com>
Fixes: da7e8b3823 ("tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous commit bdb596ceb4 ("smb: client: fix potential UAF in
smb2_close_cached_fid()") was an incomplete backport and missed one
kref_put() call in cfids_invalidation_worker() that should have been
converted to close_cached_dir().
Fixes: 065bd62412 ("smb: client: fix potential UAF in smb2_close_cached_fid()")"
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit eb6e7f520d ]
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53afec2c8f ]
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
"-e, --threads NRTHR"
to match the implementation.
Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.
Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90a88306eb ]
Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d26e9f669c ]
Since 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to
UAC3 values") usb-audio is using UAC3_CLOCK_SOURCE instead of
bDescriptorSubtype, later refactored with e0ccdef926 ("ALSA: usb-audio:
Clean up check_input_term()") into parse_term_uac2_clock_source().
This breaks the clock source selection for at least my
1397:0003 BEHRINGER International GmbH FCA610 Pro.
Fix by using UAC2_CLOCK_SOURCE in parse_term_uac2_clock_source().
Fixes: 8b3a087f7f ("ALSA: usb-audio: Unify virtual type units type to UAC3 values")
Signed-off-by: René Rebe <rene@exactco.de>
Link: https://patch.msgid.link/20251125.154149.1121389544970412061.rene@exactco.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31475b8811 ]
When a zero ASCE is passed to the __ptep_rdp() inline assembly, the
generated instruction should have the R3 field of the instruction set to
zero. However the inline assembly is written incorrectly: for such cases a
zero is loaded into a register allocated by the compiler and this register
is then used by the instruction.
This means that selected TLB entries may not be flushed since the specified
ASCE does not match the one which was used when the selected TLB entries
were created.
Fix this by removing the asce and opt parameters of __ptep_rdp(), since
all callers always pass zero, and use a hard-coded register zero for
the R3 field.
Fixes: 0807b85652 ("s390/mm: add support for RDP (Reset DAT-Protection)")
Cc: stable@vger.kernel.org
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d52dea485c ]
If user provides a large value (such as 0x80) for parameter
prefetch_mem_region_instance in vm_bind ioctl, it will cause
BIT(prefetch_region) overflow as below:
"
------------[ cut here ]------------
UBSAN: shift-out-of-bounds in drivers/gpu/drm/xe/xe_vm.c:3414:7
shift exponent 128 is too large for 64-bit type 'long unsigned int'
CPU: 8 UID: 0 PID: 53120 Comm: xe_exec_system_ Tainted: G W 6.18.0-rc1-lgci-xe-kernel+ #200 PREEMPT(voluntary)
Tainted: [W]=WARN
Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
Call Trace:
<TASK>
dump_stack_lvl+0xa0/0xc0
dump_stack+0x10/0x20
ubsan_epilogue+0x9/0x40
__ubsan_handle_shift_out_of_bounds+0x10e/0x170
? mutex_unlock+0x12/0x20
xe_vm_bind_ioctl.cold+0x20/0x3c [xe]
...
"
Fix it by validating prefetch_region before the BIT() usage.
v2: Add Closes and Cc stable kernels. (Matt)
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6478
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251112181005.2120521-2-shuicheng.lin@intel.com
(cherry picked from commit 8f565bdd14)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit d52dea485c)
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3f9eacf4f0 upstream.
32bit ID registers aren't getting much love these days, and are
often missed in updates. One of these updates broke restoring
a GICv2 guest on a GICv3 machine.
Instead of performing a piecemeal fix, just bite the bullet
and make all 32bit ID regs fully writable. KVM itself never
relies on them for anything, and if the VMM wants to mess up
the guest, so be it.
Fixes: 5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is presented to the guest")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oupton@kernel.org>
Link: https://patch.msgid.link/20251030122707.2033690-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The recent backport of the upstream commit 05a1fc5efd ("ALSA:
usb-audio: Fix potential overflow of PCM transfer buffer") on the
older stable kernels like 6.12.y was broken since it doesn't consider
the mutex unlock, where the upstream code manages with guard().
In the older code, we still need an explicit unlock.
This is a fix that corrects the error path, applied only on old stable
trees.
Reported-by: Pavel Machek <pavel@denx.de>
Closes: https://lore.kernel.org/aSWtH0AZH5+aeb+a@duo.ucw.cz
Fixes: 98e9d5e33b ("ALSA: usb-audio: Fix potential overflow of PCM transfer buffer")
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c2931a95 ]
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3927c4a108 ]
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c15d5c62ab ]
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b39ca4572 ]
Make __blk_crypto_bio_prep() propagate BLK_STS_INVAL when IO segments
fail the data unit alignment check.
This was flagged by an LTP test that expects EINVAL when performing an
O_DIRECT read with a misaligned buffer [1].
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/all/aP-c5gPjrpsn0vJA@google.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34892cfec0 ]
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9311e9540a ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a9fb5129e ]
Limit Entrysign sha256 signature checking to CPUs in the range Zen1-Zen5.
X86_BUG cannot be used here because the loading on the BSP happens way
too early, before the cpufeatures machinery has been set up.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/all/20251023124629.5385-1-bp@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b7780602 ]
Commit 995412e23b ("blk-mq: Replace tags->lock with SRCU for tag
iterators") introduced the following regression:
Call trace:
__srcu_read_lock+0x30/0x80 (P)
blk_mq_tagset_busy_iter+0x44/0x300
scsi_host_busy+0x38/0x70
ufshcd_print_host_state+0x34/0x1bc
ufshcd_link_startup.constprop.0+0xe4/0x2e0
ufshcd_init+0x944/0xf80
ufshcd_pltfrm_init+0x504/0x820
ufs_rockchip_probe+0x2c/0x88
platform_probe+0x5c/0xa4
really_probe+0xc0/0x38c
__driver_probe_device+0x7c/0x150
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1e0
bus_for_each_dev+0x7c/0xdc
driver_attach+0x24/0x30
bus_add_driver+0x110/0x230
driver_register+0x68/0x130
__platform_driver_register+0x20/0x2c
ufs_rockchip_pltform_init+0x1c/0x28
do_one_initcall+0x60/0x1e0
kernel_init_freeable+0x248/0x2c4
kernel_init+0x20/0x140
ret_from_fork+0x10/0x20
Fix this regression by making scsi_host_busy() check whether the SCSI
host tag set has already been initialized. tag_set->ops is set by
scsi_mq_setup_tags() just before blk_mq_alloc_tag_set() is called. This
fix is based on the assumption that scsi_host_busy() and
scsi_mq_setup_tags() calls are serialized. This is the case in the UFS
driver.
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Closes: https://lore.kernel.org/linux-block/pnezafputodmqlpumwfbn644ohjybouveehcjhz2hmhtcf2rka@sdhoiivync4y/
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20251007214800.1678255-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f765fdfcd8 ]
Fix typo in description of enable_gcm_256 module parameter
Suggested-by: Thomas Spear <speeddymon@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2a69add80 ]
Some bus devices can be marked as disabled for specific SoCs or models.
Those should not be registered to avoid probing them.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251003125126.27950-1-zajec5@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 002541ef65 ]
During connect(), acting on a signal/timeout by disconnecting an already
established socket leads to several issues:
1. connect() invoking vsock_transport_cancel_pkt() ->
virtio_transport_purge_skbs() may race with sendmsg() invoking
virtio_transport_get_credit(). This results in a permanently elevated
`vvs->bytes_unsent`. Which, in turn, confuses the SOCK_LINGER handling.
2. connect() resetting a connected socket's state may race with socket
being placed in a sockmap. A disconnected socket remaining in a sockmap
breaks sockmap's assumptions. And gives rise to WARNs.
3. connect() transitioning SS_CONNECTED -> SS_UNCONNECTED allows for a
transport change/drop after TCP_ESTABLISHED. Which poses a problem for
any simultaneous sendmsg() or connect() and may result in a
use-after-free/null-ptr-deref.
Do not disconnect socket on signal/timeout. Keep the logic for unconnected
sockets: they don't linger, can't be placed in a sockmap, are rejected by
sendmsg().
[1]: https://lore.kernel.org/netdev/e07fd95c-9a38-4eea-9638-133e38c2ec9b@rbox.co/
[2]: https://lore.kernel.org/netdev/20250317-vsock-trans-signal-race-v4-0-fc8837f3f1d4@rbox.co/
[3]: https://lore.kernel.org/netdev/60f1b7db-3099-4f6a-875e-af9f6ef194f6@rbox.co/
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251119-vsock-interrupted-connect-v2-1-70734cf1233f@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e4d9120cf ]
Add proper cleanup of ctx->source and fc->source to the
cifs_parse_mount_err error handler. This ensures that memory allocated
for the source strings is correctly freed on all error paths, matching
the cleanup already performed in the success path by
smb3_cleanup_fs_context_contents().
Pointers are also set to NULL after freeing to prevent potential
double-free issues.
This change fixes a memory leak originally detected by syzbot. The
leak occurred when processing Opt_source mount options if an error
happened after ctx->source and fc->source were successfully
allocated but before the function completed.
The specific leak sequence was:
1. ctx->source = smb3_fs_context_fullpath(ctx, '/') allocates memory
2. fc->source = kstrdup(ctx->source, GFP_KERNEL) allocates more memory
3. A subsequent error jumps to cifs_parse_mount_err
4. The old error handler freed passwords but not the source strings,
causing the memory to leak.
This issue was not addressed by commit e8c73eb7db ("cifs: client:
fix memory leak in smb3_fs_context_parse_param"), which only fixed
leaks from repeated fsconfig() calls but not this error path.
Patch updated with minor change suggested by kernel test robot
Reported-by: syzbot+87be6809ed9bf6d718e3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=87be6809ed9bf6d718e3
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20d7338f2d ]
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bf3a476ce ]
Miao Wang reported a bug of SO_PEEK_OFF on AF_UNIX SOCK_STREAM
socket.
The unexpected behaviour is triggered when the peek offset is
larger than the recv queue and the thread is unblocked by new
data.
Let's assume a socket which has "aaaa" in the recv queue and
the peek offset is 4.
First, unix_stream_read_generic() reads the offset 4 and skips
the skb(s) of "aaaa" with the code below:
skip = max(sk_peek_offset(sk, flags), 0); /* @skip is 4. */
do {
...
while (skip >= unix_skb_len(skb)) {
skip -= unix_skb_len(skb);
...
skb = skb_peek_next(skb, &sk->sk_receive_queue);
if (!skb)
goto again; /* @skip is 0. */
}
The thread jumps to the 'again' label and goes to sleep since
new data has not arrived yet.
Later, new data "bbbb" unblocks the thread, and the thread jumps
to the 'redo:' label to restart the entire process from the first
skb in the recv queue.
do {
...
redo:
...
last = skb = skb_peek(&sk->sk_receive_queue);
...
again:
if (skb == NULL) {
...
timeo = unix_stream_data_wait(sk, timeo, last,
last_len, freezable);
...
goto redo; /* @skip is 0 !! */
However, the peek offset is not reset in the path.
If the buffer size is 8, recv() will return "aaaabbbb" without
skipping any data, and the final offset will be 12 (the original
offset 4 + peeked skbs' length 8).
After sleeping in unix_stream_read_generic(), we have to fetch the
peek offset again.
Let's move the redo label before mutex_lock(&u->iolock).
Fixes: 9f389e3567 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag")
Reported-by: Miao Wang <shankerwangmiao@gmail.com>
Closes: https://lore.kernel.org/netdev/3B969F90-F51F-4B9D-AB1A-994D9A54D460@gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251117174740.3684604-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b77338eb2 ]
In unix_stream_read_generic(), state->msg is fetched multiple times.
Let's cache it in a local variable.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250702223606.1054680-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 7bf3a476ce ("af_unix: Read sk_peek_offset() again after sleeping in unix_stream_read_generic().")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f94c1a114a ]
The function devl_rate_nodes_destroy is documented to "Unset parent for
all rate objects". However, it was only calling the driver-specific
`rate_leaf_parent_set` or `rate_node_parent_set` ops and decrementing
the parent's refcount, without actually setting the
`devlink_rate->parent` pointer to NULL.
This leaves a dangling pointer in the `devlink_rate` struct, which cause
refcount error in netdevsim[1] and mlx5[2]. In addition, this is
inconsistent with the behavior of `devlink_nl_rate_parent_node_set`,
where the parent pointer is correctly cleared.
This patch fixes the issue by explicitly setting `devlink_rate->parent`
to NULL after notifying the driver, thus fulfilling the function's
documented behavior for all rate objects.
[1]
repro steps:
echo 1 > /sys/bus/netdevsim/new_device
devlink dev eswitch set netdevsim/netdevsim1 mode switchdev
echo 1 > /sys/bus/netdevsim/devices/netdevsim1/sriov_numvfs
devlink port function rate add netdevsim/netdevsim1/test_node
devlink port function rate set netdevsim/netdevsim1/128 parent test_node
echo 1 > /sys/bus/netdevsim/del_device
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 8 PID: 1530 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 8 UID: 0 PID: 1530 Comm: bash Not tainted 6.18.0-rc4+ #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
__nsim_dev_port_del+0x6c/0x70 [netdevsim]
nsim_dev_reload_destroy+0x11c/0x140 [netdevsim]
nsim_drv_remove+0x2b/0xb0 [netdevsim]
device_release_driver_internal+0x194/0x1f0
bus_remove_device+0xc6/0x130
device_del+0x159/0x3c0
device_unregister+0x1a/0x60
del_device_store+0x111/0x170 [netdevsim]
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x55/0x10f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
devlink dev eswitch set pci/0000:08:00.0 mode switchdev
devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 1000
devlink port function rate add pci/0000:08:00.0/group1
devlink port function rate set pci/0000:08:00.0/32768 parent group1
modprobe -r mlx5_ib mlx5_fwctl mlx5_core
dmesg:
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 7 PID: 16151 at lib/refcount.c:31 refcount_warn_saturate+0x42/0xe0
CPU: 7 UID: 0 PID: 16151 Comm: bash Not tainted 6.17.0-rc7_for_upstream_min_debug_2025_10_02_12_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0x42/0xe0
Call Trace:
<TASK>
devl_rate_leaf_destroy+0x8d/0x90
mlx5_esw_offloads_devlink_port_unregister+0x33/0x60 [mlx5_core]
mlx5_esw_offloads_unload_rep+0x3f/0x50 [mlx5_core]
mlx5_eswitch_unload_sf_vport+0x40/0x90 [mlx5_core]
mlx5_sf_esw_event+0xc4/0x120 [mlx5_core]
notifier_call_chain+0x33/0xa0
blocking_notifier_call_chain+0x3b/0x50
mlx5_eswitch_disable_locked+0x50/0x110 [mlx5_core]
mlx5_eswitch_disable+0x63/0x90 [mlx5_core]
mlx5_unload+0x1d/0x170 [mlx5_core]
mlx5_uninit_one+0xa2/0x130 [mlx5_core]
remove_one+0x78/0xd0 [mlx5_core]
pci_device_remove+0x39/0xa0
device_release_driver_internal+0x194/0x1f0
unbind_store+0x99/0xa0
kernfs_fop_write_iter+0x12e/0x1e0
vfs_write+0x215/0x3d0
ksys_write+0x5f/0xd0
do_syscall_64+0x53/0x1f0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: d755598450 ("devlink: Allow setting parent node of rate objects")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763381149-1234377-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6010d4d8b5 ]
s32_pmx_gpio_request_enable() does not initialize the newly-allocated
gpio_pin_config::list before adding it to s32_pinctrl::gpio_configs.
This could result in a linked list corruption.
Initialize the new list_head with INIT_LIST_HEAD() to fix this.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97ea34defb ]
s32_pinctrl_desc is allocated with devm_kmalloc(), but not all of its
fields are initialized. Notably, num_custom_params is used in
pinconf_generic_parse_dt_config(), resulting in intermittent allocation
errors, such as the following splat when probing i2c-imx:
WARNING: CPU: 0 PID: 176 at mm/page_alloc.c:4795 __alloc_pages_noprof+0x290/0x300
[...]
Hardware name: NXP S32G3 Reference Design Board 3 (S32G-VNP-RDB3) (DT)
[...]
Call trace:
__alloc_pages_noprof+0x290/0x300 (P)
___kmalloc_large_node+0x84/0x168
__kmalloc_large_node_noprof+0x34/0x120
__kmalloc_noprof+0x2ac/0x378
pinconf_generic_parse_dt_config+0x68/0x1a0
s32_dt_node_to_map+0x104/0x248
dt_to_map_one_config+0x154/0x1d8
pinctrl_dt_to_map+0x12c/0x280
create_pinctrl+0x6c/0x270
pinctrl_get+0xc0/0x170
devm_pinctrl_get+0x50/0xa0
pinctrl_bind_pins+0x60/0x2a0
really_probe+0x60/0x3a0
[...]
__platform_driver_register+0x2c/0x40
i2c_adap_imx_init+0x28/0xff8 [i2c_imx]
[...]
This results in later parse failures that can cause issues in dependent
drivers:
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c0-pins/i2c0-grp0: could not parse node property
[...]
pca953x 0-0022: failed writing register: -6
i2c i2c-0: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c2-pins/i2c2-grp0: could not parse node property
i2c i2c-1: IMX I2C adapter registered
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
s32g-siul2-pinctrl 4009c240.pinctrl: /soc@0/pinctrl@4009c240/i2c4-pins/i2c4-grp0: could not parse node property
i2c i2c-2: IMX I2C adapter registered
Fix this by initializing s32_pinctrl_desc with devm_kzalloc() instead of
devm_kmalloc() in s32_pinctrl_probe(), which sets the previously
uninitialized fields to zero.
Fixes: fd84aaa817 ("pinctrl: add NXP S32 SoC family support")
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Tested-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23a5b9b12d ]
Improve the cleanup on releasing PTP resources in error path.
The error case might happen either at the driver probe and PTP
feature initialization or on PTP restart (errors in reset handling, NVM
update etc). In both cases, calls to PF PTP cleanup (ice_ptp_cleanup_pf
function) and 'ps_lock' mutex deinitialization were missed.
Additionally, ptp clock was not unregistered in the latter case.
Keep PTP state as 'uninitialized' on init to distinguish between error
scenarios and to avoid resource release duplication at driver removal.
The consequence of missing ice_ptp_cleanup_pf call is the following call
trace dumped when ice_adapter object is freed (port list is not empty,
as it is required at this stage):
[ T93022] ------------[ cut here ]------------
[ T93022] WARNING: CPU: 10 PID: 93022 at
ice/ice_adapter.c:67 ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] RIP: 0010:ice_adapter_put+0xef/0x100 [ice]
...
[ T93022] Call Trace:
[ T93022] <TASK>
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? __warn.cold+0xb0/0x10e
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] ? report_bug+0xd8/0x150
[ T93022] ? handle_bug+0xe9/0x110
[ T93022] ? exc_invalid_op+0x17/0x70
[ T93022] ? asm_exc_invalid_op+0x1a/0x20
[ T93022] ? ice_adapter_put+0xef/0x100 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
[ T93022] pci_device_remove+0x42/0xb0
[ T93022] device_release_driver_internal+0x19f/0x200
[ T93022] driver_detach+0x48/0x90
[ T93022] bus_remove_driver+0x70/0xf0
[ T93022] pci_unregister_driver+0x42/0xb0
[ T93022] ice_module_exit+0x10/0xdb0 [ice
33d2647ad4f6d866d41eefff1806df37c68aef0c]
...
[ T93022] ---[ end trace 0000000000000000 ]---
[ T93022] ice: module unloaded
Fixes: e800654e85 ("ice: Use ice_adapter for PTP shared data instead of auxdev")
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 896f1a2493 ]
The loops in 'qede_tpa_cont()' and 'qede_tpa_end()', iterate
over 'cqe->len_list[]' using only a zero-length terminator as
the stopping condition. If the terminator was missing or
malformed, the loop could run past the end of the fixed-size array.
Add an explicit bound check using ARRAY_SIZE() in both loops to prevent
a potential out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 55482edc25 ("qede: Add slowpath/fastpath support and enable hardware GRO")
Signed-off-by: Pavel Zhigulin <Pavel.Zhigulin@kaspersky.com>
Link: https://patch.msgid.link/20251113112757.4166625-1-Pavel.Zhigulin@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8bb447efc ]
isst_if_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is returned from the probe function as is but
probe functions should return normal errnos. A proper implementation
can be found in drivers/leds/leds-ss4200.c.
Convert PCIBIOS_* return codes using pcibios_err_to_errno() into
normal errno before returning.
Fixes: d3a2358429 ("platform/x86: ISST: Add Intel Speed Select mmio interface")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20251117033354.132-1-vulab@iscas.ac.cn
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bed22c7b90 ]
ret_set_ksft_status() calls ksft_status_merge() with the current return
status and the last one. It treats a non-zero return code from
ksft_status_merge() as an indication that the return status was
overwritten by the last one and therefore overwrites the return message
with the last one.
Currently, ksft_status_merge() returns a non-zero return code even if
the current return status and the last one are equal. This results in
return messages being overwritten which is counter-productive since we
are more interested in the first failure message and not the last one.
Fix by changing ksft_status_merge() to only return a non-zero return
code if the current return status was actually changed.
Add a test case which checks that the first error message is not
overwritten.
Before:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [FAIL]
retmsg=tfail expected tfail2
[...]
# echo $?
1
After:
# ./lib_sh_test.sh
[...]
TEST: RET tfail2 tfail -> fail [ OK ]
[...]
# echo $?
0
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251116081029.69112-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da02a18248 ]
The function 'mpc_rcvd_sweep_req(mpcginfo)' is called conditionally
from function 'ctcmpc_unpack_skb'. It frees passed mpcginfo.
After that a call to function 'kfree' in function 'ctcmpc_unpack_skb'
frees it again.
Remove 'kfree' call in function 'mpc_rcvd_sweep_req(mpcginfo)'.
Bug detected by the clang static analyzer.
Fixes: 0c0b20587b ("s390/ctcm: fix potential memory leak")
Reviewed-by: Aswin Karuvally <aswin@linux.ibm.com>
Signed-off-by: Aleksei Nikiforov <aleksei.nikiforov@linux.ibm.com>
Signed-off-by: Aswin Karuvally <aswin@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251112182724.1109474-1-aswin@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d87cd5335 ]
Blktests test cases nvme/014, 057 and 058 fail occasionally due to a
lockdep WARN. As reported in the Closes tag URL, the WARN indicates that
a deadlock can happen due to the dependency among disk->open_mutex,
kblockd workqueue completion and partition_scan_work completion.
To avoid the lockdep WARN and the potential deadlock, cut the dependency
by running the partition_scan_work not by kblockd workqueue but by
nvme_wq.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-block/CAHj4cs8mJ+R_GmQm9R8ebResKAWUE8kF5+_WVg0v8zndmqd6BQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-block/oeyzci6ffshpukpfqgztsdeke5ost5hzsuz4rrsjfmvpqcevax@5nhnwbkzbrpa/
Fixes: 1f021341ee ("nvme-multipath: defer partition scanning")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe28c4167 ]
The validation of the set(nsh(...)) action is completely wrong.
It runs through the nsh_key_put_from_nlattr() function that is the
same function that validates NSH keys for the flow match and the
push_nsh() action. However, the set(nsh(...)) has a very different
memory layout. Nested attributes in there are doubled in size in
case of the masked set(). That makes proper validation impossible.
There is also confusion in the code between the 'masked' flag, that
says that the nested attributes are doubled in size containing both
the value and the mask, and the 'is_mask' that says that the value
we're parsing is the mask. This is causing kernel crash on trying to
write into mask part of the match with SW_FLOW_KEY_PUT() during
validation, while validate_nsh() doesn't allocate any memory for it:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1c2383067 P4D 1c2383067 PUD 20b703067 PMD 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 8 UID: 0 Kdump: loaded Not tainted 6.17.0-rc4+ #107 PREEMPT(voluntary)
RIP: 0010:nsh_key_put_from_nlattr+0x19d/0x610 [openvswitch]
Call Trace:
<TASK>
validate_nsh+0x60/0x90 [openvswitch]
validate_set.constprop.0+0x270/0x3c0 [openvswitch]
__ovs_nla_copy_actions+0x477/0x860 [openvswitch]
ovs_nla_copy_actions+0x8d/0x100 [openvswitch]
ovs_packet_cmd_execute+0x1cc/0x310 [openvswitch]
genl_family_rcv_msg_doit+0xdb/0x130
genl_family_rcv_msg+0x14b/0x220
genl_rcv_msg+0x47/0xa0
netlink_rcv_skb+0x53/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x280/0x3b0
netlink_sendmsg+0x1f7/0x430
____sys_sendmsg+0x36b/0x3a0
___sys_sendmsg+0x87/0xd0
__sys_sendmsg+0x6d/0xd0
do_syscall_64+0x7b/0x2c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The third issue with this process is that while trying to convert
the non-masked set into masked one, validate_set() copies and doubles
the size of the OVS_KEY_ATTR_NSH as if it didn't have any nested
attributes. It should be copying each nested attribute and doubling
them in size independently. And the process must be properly reversed
during the conversion back from masked to a non-masked variant during
the flow dump.
In the end, the only two outcomes of trying to use this action are
either validation failure or a kernel crash. And if somehow someone
manages to install a flow with such an action, it will most definitely
not do what it is supposed to, since all the keys and the masks are
mixed up.
Fixing all the issues is a complex task as it requires re-writing
most of the validation code.
Given that and the fact that this functionality never worked since
introduction, let's just remove it altogether. It's better to
re-introduce it later with a proper implementation instead of trying
to fix it in stable releases.
Fixes: b2d0f5d5dc ("openvswitch: enable NSH support")
Reported-by: Junvy Yang <zhuque@tencent.com>
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20251112112246.95064-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
