[ Upstream commit aea2517999 ]
Mahe reported missing function from stack trace on top of kprobe
multi program. The missing function is the very first one in the
stacktrace, the one that the bpf program is attached to.
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
('*' is used for kprobe_multi attachment)
The reason is that the previous change (the Fixes commit) fixed
stack unwind for tracepoint, but removed attached function address
from the stack trace on top of kprobe multi programs, which I also
overlooked in the related test (check following patch).
The tracepoint and kprobe_multi have different stack setup, but use
same unwind path. I think it's better to keep the previous change,
which fixed tracepoint unwind and instead change the kprobe multi
unwind as explained below.
The bpf program stack unwind calls perf_callchain_kernel for kernel
portion and it follows two unwind paths based on X86_EFLAGS_FIXED
bit in pt_regs.flags.
When the bit set we unwind from stack represented by pt_regs argument,
otherwise we unwind currently executed stack up to 'first_frame'
boundary.
The 'first_frame' value is taken from regs.rsp value, but ftrace_caller
and ftrace_regs_caller (ftrace trampoline) functions set the regs.rsp
to the previous stack frame, so we skip the attached function entry.
If we switch kprobe_multi unwind to use the X86_EFLAGS_FIXED bit,
we set the start of the unwind to the attached function address.
As another benefit we also cut extra unwind cycles needed to reach
the 'first_frame' boundary.
The speedup can be measured with trigger bench for kprobe_multi
program and stacktrace support.
- trigger bench with stacktrace on current code:
kprobe-multi : 0.810 ± 0.001M/s
kretprobe-multi: 0.808 ± 0.001M/s
- and with the fix:
kprobe-multi : 1.264 ± 0.001M/s
kretprobe-multi: 1.401 ± 0.002M/s
With the fix, the entry probe stacktrace:
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
__x64_sys_newuname+9
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
The return probe skips the attached function, because it's no longer
on the stack at the point of the unwind and this way is the same how
standard kretprobe works.
# bpftrace -e 'kretprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
Fixes: 6d08340d1e ("Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"")
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-3-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20a0bc1027 ]
Currently we don't get stack trace via ORC unwinder on top of fgraph exit
handler. We can see that when generating stacktrace from kretprobe_multi
bpf program which is based on fprobe/fgraph.
The reason is that the ORC unwind code won't get pass the return_to_handler
callback installed by fgraph return probe machinery.
Solving this by creating stack frame in return_to_handler expected by
ftrace_graph_ret_addr function to recover original return address and
continue with the unwind.
Also updating the pt_regs data with cs/flags/rsp which are needed for
successful stack retrieval from ebpf bpf_get_stackid helper.
- in get_perf_callchain we check user_mode(regs) so CS has to be set
- in perf_callchain_kernel we call perf_hw_regs(regs), so EFLAGS/FIXED
has to be unset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5d01b7199 ]
Add ftrace_fill_perf_regs() which should be compatible with the
perf_fetch_caller_regs(). In other words, the pt_regs returned from the
ftrace_fill_perf_regs() must satisfy 'user_mode(regs) == false' and can be
used for stack tracing.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: bpf <bpf@vger.kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: x86@kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/173518997908.391279.15910334347345106424.stgit@devnote2
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4cf33ca48 ]
Most architectures use pt_regs within ftrace_regs making a lot of the
accessor functions just calls to the pt_regs internally. Instead of
duplication this effort, use a HAVE_ARCH_FTRACE_REGS for architectures
that have their own ftrace_regs that is not based on pt_regs and will
define all the accessor functions, and for the architectures that just use
pt_regs, it will leave it undefined, and the default accessor functions
will be used.
Note, this will also make it easier to add new accessor functions to
ftrace_regs as it will mean having to touch less architectures.
Cc: <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241010202114.2289f6fd@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> # powerpc
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7888af4166 ]
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: aea2517999 ("x86/fgraph,bpf: Switch kprobe_multi program stack unwind to hw_regs path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 16459fe7e0 upstream.
The original patch inverted the PTE unconditionally to avoid
L1TF-vulnerable PTEs, but Linux doesn't make this adjustment in 2-level
paging.
Adjust the logic to use the flip_protnone_guard() helper, which is a nop
on 2-level paging but inverts the address bits in all other paging modes.
This doesn't matter for the Xen aspect of the original change. Linux no
longer supports running 32bit PV under Xen, and Xen doesn't support
running any 32bit PV guests without using PAE paging.
Link: https://lkml.kernel.org/r/20260126211046.2096622-1-andrew.cooper3@citrix.com
Fixes: b505f19445 ("x86/kfence: avoid writing L1TF-vulnerable PTEs")
Reported-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Closes: https://lore.kernel.org/lkml/CAKFNMokwjw68ubYQM9WkzOuH51wLznHpEOMSqtMoV1Rn9JV_gw@mail.gmail.com/
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2687c848e5 upstream.
Fedora QA reported the following panic:
BUG: unable to handle page fault for address: 0000000040003e54
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025
RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90
..
Call Trace:
vmmouse_report_events+0x13e/0x1b0
psmouse_handle_byte+0x15/0x60
ps2_interrupt+0x8a/0xd0
...
because the QEMU VMware mouse emulation is buggy, and clears the top 32
bits of %rdi that the kernel kept a pointer in.
The QEMU vmmouse driver saves and restores the register state in a
"uint32_t data[6];" and as a result restores the state with the high
bits all cleared.
RDI originally contained the value of a valid kernel stack address
(0xff5eeb3240003e54). After the vmware hypercall it now contains
0x40003e54, and we get a page fault as a result when it is dereferenced.
The proper fix would be in QEMU, but this works around the issue in the
kernel to keep old setups working, when old kernels had not happened to
keep any state in %rdi over the hypercall.
In theory this same issue exists for all the hypercalls in the vmmouse
driver; in practice it has only been seen with vmware_hypercall3() and
vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those
two calls. This should have a minimal effect on code generation overall
as it should be rare for the compiler to want to make RDI/RSI live
across hypercalls.
Reported-by: Justin Forbes <jforbes@fedoraproject.org>
Link: https://lore.kernel.org/all/99a9c69a-fc1a-43b7-8d1e-c42d6493b41f@broadcom.com/
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b505f19445 upstream.
For native, the choice of PTE is fine. There's real memory backing the
non-present PTE. However, for XenPV, Xen complains:
(XEN) d1 L1TF-vulnerable L1e 8010000018200066 - Shadowing
To explain, some background on XenPV pagetables:
Xen PV guests are control their own pagetables; they choose the new
PTE value, and use hypercalls to make changes so Xen can audit for
safety.
In addition to a regular reference count, Xen also maintains a type
reference count. e.g. SegDesc (referenced by vGDT/vLDT), Writable
(referenced with _PAGE_RW) or L{1..4} (referenced by vCR3 or a lower
pagetable level). This is in order to prevent e.g. a page being
inserted into the pagetables for which the guest has a writable mapping.
For non-present mappings, all other bits become software accessible,
and typically contain metadata rather a real frame address. There is
nothing that a reference count could sensibly be tied to. As such, even
if Xen could recognise the address as currently safe, nothing would
prevent that frame from changing owner to another VM in the future.
When Xen detects a PV guest writing a L1TF-PTE, it responds by
activating shadow paging. This is normally only used for the live phase
of migration, and comes with a reasonable overhead.
KFENCE only cares about getting #PF to catch wild accesses; it doesn't
care about the value for non-present mappings. Use a fully inverted PTE,
to avoid hitting the slow path when running under Xen.
While adjusting the logic, take the opportunity to skip all actions if the
PTE is already in the right state, half the number PVOps callouts, and
skip TLB maintenance on a !P -> P transition which benefits non-Xen cases
too.
Link: https://lkml.kernel.org/r/20260106180426.710013-1-andrew.cooper3@citrix.com
Fixes: 1dc0da6e9e ("x86, kfence: enable KFENCE for x86")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0edc78b82b ]
Luigi reported that retriggering a posted MSI interrupt does not work
correctly.
The reason is that the retrigger happens at the vector domain by sending an
IPI to the actual vector on the target CPU. That works correctly exactly
once because the posted MSI interrupt chip does not issue an EOI as that's
only required for the posted MSI notification vector itself.
As a consequence the vector becomes stale in the ISR, which not only
affects this vector but also any lower priority vector in the affected
APIC because the ISR bit is not cleared.
Luigi proposed to set the vector in the remap PIR bitmap and raise the
posted MSI notification vector. That works, but that still does not cure a
related problem:
If there is ever a stray interrupt on such a vector, then the related
APIC ISR bit becomes stale due to the lack of EOI as described above.
Unlikely to happen, but if it happens it's not debuggable at all.
So instead of playing games with the PIR, this can be actually solved
for both cases by:
1) Keeping track of the posted interrupt vector handler state
2) Implementing a posted MSI specific irq_ack() callback which checks that
state. If the posted vector handler is inactive it issues an EOI,
otherwise it delegates that to the posted handler.
This is correct versus affinity changes and concurrent events on the posted
vector as the actual handler invocation is serialized through the interrupt
descriptor lock.
Fixes: ed1e48ea43 ("iommu/vt-d: Enable posted mode for device MSIs")
Reported-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Luigi Rizzo <lrizzo@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251125214631.044440658@linutronix.de
Closes: https://lore.kernel.org/lkml/20251124104836.3685533-1-lrizzo@google.com
[ DEFINE_PER_CPU_CACHE_HOT => DEFINE_PER_CPU ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1fe4002cf7 ]
A KASAN build bloats these single load/store helpers such that
it fails to inline them:
vmlinux.o: error: objtool: irqentry_exit+0x5e8: call to instruction_pointer_set() with UACCESS enabled
Make sure the compiler isn't allowed to do stupid.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251031105435.GU4068168@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4da3768e18 upstream.
When re-injecting a soft interrupt from an INT3, INT0, or (select) INTn
instruction, discard the exception and retry the instruction if the code
stream is changed (e.g. by a different vCPU) between when the CPU
executes the instruction and when KVM decodes the instruction to get the
next RIP.
As effectively predicted by commit 6ef88d6e36 ("KVM: SVM: Re-inject
INT3/INTO instead of retrying the instruction"), failure to verify that
the correct INTn instruction was decoded can effectively clobber guest
state due to decoding the wrong instruction and thus specifying the
wrong next RIP.
The bug most often manifests as "Oops: int3" panics on static branch
checks in Linux guests. Enabling or disabling a static branch in Linux
uses the kernel's "text poke" code patching mechanism. To modify code
while other CPUs may be executing that code, Linux (temporarily)
replaces the first byte of the original instruction with an int3 (opcode
0xcc), then patches in the new code stream except for the first byte,
and finally replaces the int3 with the first byte of the new code
stream. If a CPU hits the int3, i.e. executes the code while it's being
modified, then the guest kernel must look up the RIP to determine how to
handle the #BP, e.g. by emulating the new instruction. If the RIP is
incorrect, then this lookup fails and the guest kernel panics.
The bug reproduces almost instantly by hacking the guest kernel to
repeatedly check a static branch[1] while running a drgn script[2] on
the host to constantly swap out the memory containing the guest's TSS.
[1]: https://gist.github.com/osandov/44d17c51c28c0ac998ea0334edf90b5a
[2]: https://gist.github.com/osandov/10e45e45afa29b11e0c7209247afc00b
Fixes: 6ef88d6e36 ("KVM: SVM: Re-inject INT3/INTO instead of retrying the instruction")
Cc: stable@vger.kernel.org
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://patch.msgid.link/1cc6dcdf36e3add7ee7c8d90ad58414eeb6c3d34.1762278762.git.osandov@fb.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 284922f4c5 ]
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd72baff22 ]
Add an assembly macro to refer runtime cost. It hides linker magic and
makes assembly more readable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304153342.2016569-1-kirill.shutemov@linux.intel.com
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91309a7082 ]
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e490dea61 ]
When compiled without CONFIG_VIDEO the architecture specific
implementations of video_is_primary_device() include prototypes and
assume that video-common.c will be linked. Guard against this so that the
fallback inline implementation that returns false will be used when
compiled without CONFIG_VIDEO.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506221312.49Fy1aNA-lkp@intel.com/
Link: https://lore.kernel.org/r/20250811162606.587759-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2676dbf9f4 ]
ICL_FIXED_0_ADAPTIVE is missed to be added into INTEL_FIXED_BITS_MASK,
add it.
With help of this new INTEL_FIXED_BITS_MASK, intel_pmu_enable_fixed() can
be optimized. The old fixed counter control bits can be unconditionally
cleared with INTEL_FIXED_BITS_MASK and then set new control bits base on
new configuration.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Link: https://lore.kernel.org/r/20250820023032.17128-7-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a5abeea9c ]
Rename the helper to better reflect its function.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/all/20241202073139.448208-1-kirill.shutemov%40linux.intel.com
Stable-dep-of: 0dccbc75e1 ("x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68e61f6fd6 upstream.
Emulate PERF_CNTR_GLOBAL_STATUS_SET when PerfMonV2 is enumerated to the
guest, as the MSR is supposed to exist in all AMD v2 PMUs.
Fixes: 4a2771895c ("KVM: x86/svm/pmu: Add AMD PerfMonV2 support")
Cc: stable@vger.kernel.org
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20250711172746.1579423-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ac9c408ed1 ]
RDPID instruction outputs to a word-sized register (64-bit on x86_64 and
32-bit on x86_32). Use an unsigned long variable to store the correct size.
LSL outputs to 32-bit register, use %k operand prefix to always print the
32-bit name of the register.
Use RDPID insn mnemonic while at it as the minimum binutils version of
2.30 supports it.
[ bp: Merge two patches touching the same function into a single one. ]
Fixes: ffebbaedc8 ("x86/vdso: Introduce helper functions for CPU and node number")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250616095315.230620-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8442df2b49 upstream.
Add support for
CPUID Fn8000_0021_EAX[31] (SRSO_MSR_FIX). If this bit is 1, it
indicates that software may use MSR BP_CFG[BpSpecReduce] to mitigate
SRSO.
Enable BpSpecReduce to mitigate SRSO across guest/host boundaries.
Switch back to enabling the bit when virtualization is enabled and to
clear the bit when virtualization is disabled because using a MSR slot
would clear the bit when the guest is exited and any training the guest
has done, would potentially influence the host kernel when execution
enters the kernel and hasn't VMRUN the guest yet.
More detail on the public thread in Link below.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241202120416.6054-1-bp@kernel.org
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 877818802c upstream.
If the machine has:
CPUID Fn8000_0021_EAX[30] (SRSO_USER_KERNEL_NO) -- If this bit is 1,
it indicates the CPU is not subject to the SRSO vulnerability across
user/kernel boundaries.
have it fall back to IBPB on VMEXIT only, in the case it is going to run
VMs:
Speculative Return Stack Overflow: Mitigation: IBPB on VMEXIT only
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-2-bp@kernel.org
[ Harshit: Conflicts resolved as this commit: 7c62c442b6 ("x86/vmscape:
Enumerate VMSCAPE bug") has been applied already to 6.12.y ]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2f8f173413 upstream.
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a508cec6e5 upstream.
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8ea815399c ]
__ADDRESSABLE_ASM_STR() is where the necessary stringification happens.
As long as "sym" doesn't contain any odd characters, no quoting is
required for its use with .quad / .long. In fact the quotation gets in
the way with gas 2.25; it's only from 2.26 onwards that quoted symbols
are half-way properly supported.
However, assembly being different from C anyway, drop
__ADDRESSABLE_ASM_STR() and its helper macro altogether. A simple
.global directive will suffice to get the symbol "declared", i.e. into
the symbol table. While there also stop open-coding STATIC_CALL_TRAMP()
and STATIC_CALL_KEY().
Fixes: 0ef8047b73 ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <609d2c74-de13-4fae-ab1a-1ec44afb948d@suse.com>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6b1dd26544 ]
Set/clear DEBUGCTLMSR_FREEZE_IN_SMM in GUEST_IA32_DEBUGCTL based on the
host's pre-VM-Enter value, i.e. preserve the host's FREEZE_IN_SMM setting
while running the guest. When running with the "default treatment of SMIs"
in effect (the only mode KVM supports), SMIs do not generate a VM-Exit that
is visible to host (non-SMM) software, and instead transitions directly
from VMX non-root to SMM. And critically, DEBUGCTL isn't context switched
by hardware on SMI or RSM, i.e. SMM will run with whatever value was
resident in hardware at the time of the SMI.
Failure to preserve FREEZE_IN_SMM results in the PMU unexpectedly counting
events while the CPU is executing in SMM, which can pollute profiling and
potentially leak information into the guest.
Check for changes in FREEZE_IN_SMM prior to every entry into KVM's inner
run loop, as the bit can be toggled in IRQ context via IPI callback (SMP
function call), by way of /sys/devices/cpu/freeze_on_smi.
Add a field in kvm_x86_ops to communicate which DEBUGCTL bits need to be
preserved, as FREEZE_IN_SMM is only supported and defined for Intel CPUs,
i.e. explicitly checking FREEZE_IN_SMM in common x86 is at best weird, and
at worst could lead to undesirable behavior in the future if AMD CPUs ever
happened to pick up a collision with the bit.
Exempt TDX vCPUs, i.e. protected guests, from the check, as the TDX Module
owns and controls GUEST_IA32_DEBUGCTL.
WARN in SVM if KVM_RUN_LOAD_DEBUGCTL is set, mostly to document that the
lack of handling isn't a KVM bug (TDX already WARNs on any run_flag).
Lastly, explicitly reload GUEST_IA32_DEBUGCTL on a VM-Fail that is missed
by KVM but detected by hardware, i.e. in nested_vmx_restore_host_state().
Doing so avoids the need to track host_debugctl on a per-VMCS basis, as
GUEST_IA32_DEBUGCTL is unconditionally written by prepare_vmcs02() and
load_vmcs12_host_state(). For the VM-Fail case, even though KVM won't
have actually entered the guest, vcpu_enter_guest() will have run with
vmcs02 active and thus could result in vmcs01 being run with a stale value.
Cc: stable@vger.kernel.org
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250610232010.162191-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: resolve syntactic conflict in vt_x86_ops definition]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17ec2f9653 ]
Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the
guest CPUID model, as debug support is supposed to be available if RTM is
supported, and there are no known downsides to letting the guest debug RTM
aborts.
Note, there are no known bug reports related to RTM_DEBUG, the primary
motivation is to reduce the probability of breaking existing guests when a
future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL
(KVM currently lets L2 run with whatever hardware supports; whoops).
Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to
DR7.RTM.
Fixes: 83c529151a ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80c64c7afe ]
Instruct vendor code to load the guest's DR6 into hardware via a new
KVM_RUN flag, and remove kvm_x86_ops.set_dr6(), whose sole purpose was to
load vcpu->arch.dr6 into hardware when DR6 can be read/written directly
by the guest.
Note, TDX already WARNs on any run_flag being set, i.e. will yell if KVM
thinks DR6 needs to be reloaded. TDX vCPUs force KVM_DEBUGREG_AUTO_SWITCH
and never clear the flag, i.e. should never observe KVM_RUN_LOAD_GUEST_DR6.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: drop TDX changes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2478b1b220 ]
Convert kvm_x86_ops.vcpu_run()'s "force_immediate_exit" boolean parameter
into an a generic bitmap so that similar "take action" information can be
passed to vendor code without creating a pile of boolean parameters.
This will allow dropping kvm_x86_ops.set_dr6() in favor of a new flag, and
will also allow for adding similar functionality for re-loading debugctl
in the active VMCS.
Opportunistically massage the TDX WARN and comment to prepare for adding
more run_flags, all of which are expected to be mutually exclusive with
TDX, i.e. should be WARNed on.
No functional change intended.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[sean: drop TDX changes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 7b306dfa32 upstream.
An SNP cache coherency vulnerability requires a cache line eviction
mitigation when validating memory after a page state change to private.
The specific mitigation is to touch the first and last byte of each 4K
page that is being validated. There is no need to perform the mitigation
when performing a page state change to shared and rescinding validation.
CPUID bit Fn8000001F_EBX[31] defines the COHERENCY_SFW_NO CPUID bit that,
when set, indicates that the software mitigation for this vulnerability is
not needed.
Implement the mitigation and invoke it when validating memory (making it
private) and the COHERENCY_SFW_NO bit is not set, indicating the SNP guest
is vulnerable.
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ce0b5eedcb ]
Hogan reported a vector setup race, which overwrites the interrupt
descriptor in the per CPU vector array resulting in a disfunctional device.
CPU0 CPU1
interrupt is raised in APIC IRR
but not handled
free_irq()
per_cpu(vector_irq, CPU1)[vector] = VECTOR_SHUTDOWN;
request_irq() common_interrupt()
d = this_cpu_read(vector_irq[vector]);
per_cpu(vector_irq, CPU1)[vector] = desc;
if (d == VECTOR_SHUTDOWN)
this_cpu_write(vector_irq[vector], VECTOR_UNUSED);
free_irq() cannot observe the pending vector in the CPU1 APIC as there is
no way to query the remote CPUs APIC IRR.
This requires that request_irq() uses the same vector/CPU as the one which
was freed, but this also can be triggered by a spurious interrupt.
Interestingly enough this problem managed to be hidden for more than a
decade.
Prevent this by reevaluating vector_irq under the vector lock, which is
held by the interrupt activation code when vector_irq is updated.
To avoid ifdeffery or IS_ENABLED() nonsense, move the
[un]lock_vector_lock() declarations out under the
CONFIG_IRQ_DOMAIN_HIERARCHY guard as it's only provided when
CONFIG_X86_LOCAL_APIC=y.
The current CONFIG_IRQ_DOMAIN_HIERARCHY guard is selected by
CONFIG_X86_LOCAL_APIC, but can also be selected by other parts of the
Kconfig system, which makes 32-bit UP builds with CONFIG_X86_LOCAL_APIC=n
fail.
Can we just get rid of this !APIC nonsense once and forever?
Fixes: 9345005f4e ("x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs")
Reported-by: Hogan Wang <hogan.wang@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Hogan Wang <hogan.wang@huawei.com>
Link: https://lore.kernel.org/all/draft-87ikjhrhhh.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86c48271e0 ]
To start an application processor in SNP-isolated guest, a hypercall
is used that takes a virtual processor index. The hv_snp_boot_ap()
function uses that START_VP hypercall but passes as VP index to it
what it receives as a wakeup_secondary_cpu_64 callback: the APIC ID.
As those two aren't generally interchangeable, that may lead to hung
APs if the VP index and the APIC ID don't match up.
Update the parameter names to avoid confusion as to what the parameter
is. Use the APIC ID to the VP index conversion to provide the correct
input to the hypercall.
Cc: stable@vger.kernel.org
Fixes: 44676bb9d5 ("x86/hyperv: Add smp support for SEV-SNP guest")
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250507182227.7421-2-romank@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20250507182227.7421-2-romank@linux.microsoft.com>
[ changed HVCALL_GET_VP_INDEX_FROM_APIC_ID to HVCALL_GET_VP_ID_FROM_APIC_ID ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa7d0f83c5 upstream.
Initialize DR7 by writing its architectural reset value to always set
bit 10, which is reserved to '1', when "clearing" DR7 so as not to
trigger unanticipated behavior if said bit is ever unreserved, e.g. as
a feature enabling flag with inverted polarity.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-3-xin%40zytor.com
[ context adjusted: no KVM_DEBUGREG_AUTO_SWITCH flag test" ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b937a1ed6 upstream.
AMD Cyan Skillfish (Family 17h, Model 47h, Stepping 0h) has an error that
causes RDSEED to always return 0xffffffff, while RDRAND works correctly.
Mask the RDSEED cap for this CPU so that both /proc/cpuinfo and direct CPUID
read report RDSEED as unavailable.
[ bp: Move to amd.c, massage. ]
Signed-off-by: Mikhail Paulyshka <me@mixaill.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250524145319.209075-1-me@mixaill.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 8e786a85c0 upstream.
Move the VERW clearing before the MONITOR so that VERW doesn't disarm it
and the machine never enters C1.
Original idea by Kim Phillips <kim.phillips@amd.com>.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit d8010d4ba4 upstream.
Add the required features detection glue to bugs.c et all in order to
support the TSA mitigation.
Co-developed-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f9af88a3d3 upstream.
It will be used by other x86 mitigations.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f465c148c upstream.
Initialize DR6 by writing its architectural reset value to avoid
incorrectly zeroing DR6 to clear DR6.BLD at boot time, which leads
to a false bus lock detected warning.
The Intel SDM says:
1) Certain debug exceptions may clear bits 0-3 of DR6.
2) BLD induced #DB clears DR6.BLD and any other debug exception
doesn't modify DR6.BLD.
3) RTM induced #DB clears DR6.RTM and any other debug exception
sets DR6.RTM.
To avoid confusion in identifying debug exceptions, debug handlers
should set DR6.BLD and DR6.RTM, and clear other DR6 bits before
returning.
The DR6 architectural reset value 0xFFFF0FF0, already defined as
macro DR6_RESERVED, satisfies these requirements, so just use it to
reinitialize DR6 whenever needed.
Since clear_all_debug_regs() no longer zeros all debug registers,
rename it to initialize_debug_regs() to better reflect its current
behavior.
Since debug_read_clear_dr6() no longer clears DR6, rename it to
debug_read_reset_dr6() to better reflect its current behavior.
Fixes: ebb1064e7c ("x86/traps: Handle #DB for bus lock")
Reported-by: Sohil Mehta <sohil.mehta@intel.com>
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/lkml/06e68373-a92b-472e-8fd9-ba548119770c@intel.com/
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250620231504.2676902-2-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b3bc018e8 upstream.
Two 'static inline' TDX helper functions (sc_retry() and
sc_retry_prerr()) take function pointer arguments which refer to
assembly functions. Normally, the compiler inlines the TDX helper,
realizes that the function pointer targets are completely static --
thus can be resolved at compile time -- and generates direct call
instructions.
But, other times (like when CONFIG_CC_OPTIMIZE_FOR_SIZE=y), the
compiler declines to inline the helpers and will instead generate
indirect call instructions.
Indirect calls to assembly functions require special annotation (for
various Control Flow Integrity mechanisms). But TDX assembly
functions lack the special annotations and can only be called
directly.
Annotate both the helpers as '__always_inline' to prod the compiler
into maintaining the direct calls. There is no guarantee here, but
Peter has volunteered to report the compiler bug if this assumption
ever breaks[1].
Fixes: 1e66a7e275 ("x86/virt/tdx: Handle SEAMCALL no entropy error in common code")
Fixes: df01f5ae07 ("x86/virt/tdx: Add SEAMCALL error printing for module initialization")
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20250605145914.GW39944@noisy.programming.kicks-ass.net/ [1]
Link: https://lore.kernel.org/all/20250606130737.30713-1-kai.huang%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e34dbbc85d upstream.
Clear the software event flag in the augmented SS to prevent immediate
repeat of single step trap on return from SIGTRAP handler if the trap
flag (TF) is set without an external debugger attached.
Following is a typical single-stepping flow for a user process:
1) The user process is prepared for single-stepping by setting
RFLAGS.TF = 1.
2) When any instruction in user space completes, a #DB is triggered.
3) The kernel handles the #DB and returns to user space, invoking the
SIGTRAP handler with RFLAGS.TF = 0.
4) After the SIGTRAP handler finishes, the user process performs a
sigreturn syscall, restoring the original state, including
RFLAGS.TF = 1.
5) Goto step 2.
According to the FRED specification:
A) Bit 17 in the augmented SS is designated as the software event
flag, which is set to 1 for FRED event delivery of SYSCALL,
SYSENTER, or INT n.
B) If bit 17 of the augmented SS is 1 and ERETU would result in
RFLAGS.TF = 1, a single-step trap will be pending upon completion
of ERETU.
In step 4) above, the software event flag is set upon the sigreturn
syscall, and its corresponding ERETU would restore RFLAGS.TF = 1.
This combination causes a pending single-step trap upon completion of
ERETU. Therefore, another #DB is triggered before any user space
instruction is executed, which leads to an infinite loop in which the
SIGTRAP handler keeps being invoked on the same user space IP.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-2-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1f13c60d84 ]
The following commit, 12 years ago:
7e98b71920 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
added barriers around the CLFLUSH in mwait_idle_with_hints(), justified with:
... and add memory barriers around it since the documentation is explicit
that CLFLUSH is only ordered with respect to MFENCE.
This also triggered, 11 years ago, the same adjustment in:
f8e617f458 ("sched/idle/x86: Optimize unnecessary mwait_idle() resched IPIs")
during development, although it failed to get the static_cpu_has_bug() treatment.
X86_BUG_CLFLUSH_MONITOR (a.k.a the AAI65 errata) is specific to Intel CPUs,
and the SDM currently states:
Executions of the CLFLUSH instruction are ordered with respect to each
other and with respect to writes, locked read-modify-write instructions,
and fence instructions[1].
With footnote 1 reading:
Earlier versions of this manual specified that executions of the CLFLUSH
instruction were ordered only by the MFENCE instruction. All processors
implementing the CLFLUSH instruction also order it relative to the other
operations enumerated above.
i.e. The SDM was incorrect at the time, and barriers should not have been
inserted. Double checking the original AAI65 errata (not available from
intel.com any more) shows no mention of barriers either.
Note: If this were a general codepath, the MFENCEs would be needed, because
AMD CPUs of the same vintage do sport otherwise-unordered CLFLUSHs.
Remove the unnecessary barriers. Furthermore, use a plain alternative(),
rather than static_cpu_has_bug() and/or no optimisation. The workaround
is a single instruction.
Use an explicit %rax pointer rather than a general memory operand, because
MONITOR takes the pointer implicitly in the same way.
[ mingo: Cleaned up the commit a bit. ]
Fixes: 7e98b71920 ("x86, idle: Use static_cpu_has() for CLFLUSH workaround, add barriers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20250402172458.1378112-1-andrew.cooper3@citrix.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7387eff4b ]
The GHCB_MSR_VMPL_REQ_LEVEL macro lacked parentheses around the bitmask
expression, causing the shift operation to bind too early. As a result,
when requesting VMPL1 (e.g., GHCB_MSR_VMPL_REQ_LEVEL(1)), incorrect
values such as 0x000000016 were generated instead of the intended
0x100000016 (the requested VMPL level is specified in GHCBData[39:32]).
Fix the precedence issue by grouping the masked value before applying
the shift.
[ bp: Massage commit message. ]
Fixes: 34ff659017 ("x86/sev: Use kernel provided SVSM Calling Areas")
Signed-off-by: Seongman Lee <augustus92@kaist.ac.kr>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250511092329.12680-1-cloudlee1719@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46dcf85566 ]
IBS Op uses two counters: MaxCnt and CurCnt. MaxCnt is programmed with
the desired sample period. IBS hw generates sample when CurCnt reaches
to MaxCnt. The size of these counter used to be 20 bits but later they
were extended to 27 bits. The 7 bit extension is indicated by CPUID
Fn8000_001B_EAX[6 / OpCntExt].
perf_ibs->cnt_mask variable contains bit masks for MaxCnt and CurCnt.
But IBS driver does not set upper 7 bits of CurCnt in cnt_mask even
when OpCntExt CPUID bit is set. Fix this.
IBS driver uses cnt_mask[CurCnt] bits only while disabling an event.
Fortunately, CurCnt bits are not read from MSR while re-enabling the
event, instead MaxCnt is programmed with desired period and CurCnt is
set to 0. Hence, we did not see any issues so far.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20250115054438.1021-5-ravi.bangoria@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20ad96c9a ]
Notably, don't attempt to decode an immediate when MOD == 3.
Additionally have it return the instruction length, such that WARN
like bugs can more reliably skip to the correct instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.721120726@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 882b86fd4e ]
Sami reminded me that FineIBT failure does not hook into the regular
CFI failure case, and as such CFI_PERMISSIVE does not work.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20250214092619.GB21726@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4087e16b03 ]
percpu_{,try_}cmpxchg{64,128}() macros use CALL instruction inside
asm statement in one of their alternatives. Use ALT_OUTPUT_SP()
macro to add required dependence on %esp register.
ALT_OUTPUT_SP() implements the above dependence by adding
ASM_CALL_CONSTRAINT to its arguments. This constraint should be used
for any inline asm which has a CALL instruction, otherwise the
compiler may schedule the asm before the frame pointer gets set up
by the containing function, causing objtool to print a "call without
frame pointer save/setup" warning.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250214150929.5780-1-ubizjak@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe37c699ae ]
Depending on the type of panics, it was found that the
__register_nmi_handler() function can be called in NMI context from
nmi_shootdown_cpus() leading to a lockdep splat:
WARNING: inconsistent lock state
inconsistent {INITIAL USE} -> {IN-NMI} usage.
lock(&nmi_desc[0].lock);
<Interrupt>
lock(&nmi_desc[0].lock);
Call Trace:
_raw_spin_lock_irqsave
__register_nmi_handler
nmi_shootdown_cpus
kdump_nmi_shootdown_cpus
native_machine_crash_shutdown
__crash_kexec
In this particular case, the following panic message was printed before:
Kernel panic - not syncing: Fatal hardware error!
This message seemed to be given out from __ghes_panic() running in
NMI context.
The __register_nmi_handler() function which takes the nmi_desc lock
with irq disabled shouldn't be called from NMI context as this can
lead to deadlock.
The nmi_shootdown_cpus() function can only be invoked once. After the
first invocation, all other CPUs should be stuck in the newly added
crash_nmi_callback() and cannot respond to a second NMI.
Fix it by adding a new emergency NMI handler to the nmi_desc
structure and provide a new set_emergency_nmi_handler() helper to set
crash_nmi_callback() in any context. The new emergency handler will
preempt other handlers in the linked list. That will eliminate the need
to take any lock and serve the panic in NMI use case.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250206191844.131700-1-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e6b0a2e41 ]
The Family model check to read the processor flag MSR is misleading and
potentially incorrect. It doesn't consider Family while comparing the
model number. The original check did have a Family number but it got
lost/moved during refactoring.
intel_collect_cpu_info() is called through multiple paths such as early
initialization, CPU hotplug as well as IFS image load. Some of these
flows would be error prone due to the ambiguous check.
Correct the processor flag scan check to use a Family number and update
it to a VFM based one to make it more readable.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250219184133.816753-4-sohil.mehta@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a141be323 ]
__ASSEMBLY__ is only defined by the Makefile of the kernel, so
this is not really useful for UAPI headers (unless the userspace
Makefile defines it, too). Let's switch to __ASSEMBLER__ which
gets set automatically by the compiler when compiling assembly
code.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Brian Gerst <brgerst@gmail.com>
Link: https://lore.kernel.org/r/20250310104256.123527-1-thuth@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
