[ Upstream commit 78211543d2 ]
The devm_gpiod_get_optional() function may return an ERR_PTR in case of
genuine GPIO acquisition errors, not just NULL which indicates the
legitimate absence of an optional GPIO.
Add an IS_ERR() check after the call in adin1110_check_spi(). On error,
return the error code to ensure proper failure handling rather than
proceeding with invalid pointers.
Fixes: 36934cac7a ("net: ethernet: adi: adin1110: add reset GPIO")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260202040228.4129097-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c28d765ec5 ]
It is not recommended to access the 32‑bit registers of this hardware IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced in the initial ENETC v1 driver for the PMAR1
register, which holds the lower 16 bits of the primary MAC address of
an SI. Meanwhile, this exception has been replicated in the v4 driver
code as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch converts the 16‑bit reads from PMAR1 starting with
ENETC v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-5-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21d0fc95b5 ]
For ENETC v4, which is integrated into more complex SoCs (compared to v1),
16‑bit register writes are blocked in the SoC interconnect on some chips.
To be fair, it is not recommended to access 32‑bit registers of this IP
using lower‑width accessors (i.e. 16‑bit), and the only exception to
this rule was introduced by me in the initial ENETC v1 driver for the
PMAR1 register, which holds the lower 16 bits of the primary MAC address
of an SI. Meanwhile, this exception has been replicated for v4 as well.
Since LS1028 (the only SoC with ENETC v1) is not affected by this issue,
the current patch fixes the 16‑bit writes to PMAR1 starting with ENETC
v4.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-4-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ae13b2e64 ]
For ENETC v4 these settings are controlled by the global ENETC
command cache attribute registers (EnCAR), from the IERB register
block.
The hardcoded CDBR cacheability settings were inherited from LS1028A,
and should be removed from the ENETC v4 driver as they conflict
with the global IERB settings.
Fixes: e3f4a0a8dd ("net: enetc: add command BD ring support for i.MX95 ENETC")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-3-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a69c17230c ]
For ENETC v4 these settings are controlled by the global ENETC
message and buffer cache attribute registers (EnBCAR and EnMCAR),
from the IERB register block.
The hardcoded cacheability settings were inherited from LS1028A,
and should be removed from the ENETC v4 driver as they conflict
with the global IERB settings.
Fixes: 99100d0d99 ("net: enetc: add preliminary support for i.MX95 ENETC PF")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260130141035.272471-2-claudiu.manoil@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4085719495 ]
The i40e driver calls udp_tunnel_get_rx_info() during i40e_open().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
? __udp_tunnel_nic_assert_locked+0x39/0x40 [udp_tunnel]
i40e_open+0x135/0x14f [i40e]
__dev_open+0x121/0x2e0
__dev_change_flags+0x227/0x270
dev_change_flags+0x3d/0xb0
devinet_ioctl+0x56f/0x860
sock_do_ioctl+0x7b/0x130
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x90/0x170
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
i40e_open() resolve the locking violation.
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 234e615bfe ]
The ice driver calls udp_tunnel_get_rx_info() during ice_open_internal().
This is redundant because UDP tunnel RX offload state is preserved
across device down/up cycles. The udp_tunnel core handles
synchronization automatically when required.
Furthermore, recent changes in the udp_tunnel infrastructure require
querying RX info while holding the udp_tunnel lock. Calling it
directly from the ndo_open path violates this requirement,
triggering the following lockdep warning:
Call Trace:
<TASK>
ice_open_internal+0x253/0x350 [ice]
__udp_tunnel_nic_assert_locked+0x86/0xb0 [udp_tunnel]
__dev_open+0x2f5/0x880
__dev_change_flags+0x44c/0x660
netif_change_flags+0x80/0x160
devinet_ioctl+0xd21/0x15f0
inet_ioctl+0x311/0x350
sock_ioctl+0x114/0x220
__x64_sys_ioctl+0x131/0x1a0
...
</TASK>
Remove the redundant and unsafe call to udp_tunnel_get_rx_info() from
ice_open_internal() to resolve the locking violation
Fixes: 1ead750109 ("udp_tunnel: remove rtnl_lock dependency")
Signed-off-by: Mohammad Heib <mheib@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b68f35eb ]
The E825 hardware currently has each PF handle the PFINT_TSYN_TX cause of
the miscellaneous OICR interrupt vector. The actual interrupt cause
underlying this is shared by all ports on the same quad:
┌─────────────────────────────────┐
│ │
│ ┌────┐ ┌────┐ ┌────┐ ┌────┐ │
│ │PF 0│ │PF 1│ │PF 2│ │PF 3│ │
│ └────┘ └────┘ └────┘ └────┘ │
│ │
└────────────────▲────────────────┘
│
│
┌────────────────┼────────────────┐
│ PHY QUAD │
└───▲────────▲────────▲────────▲──┘
│ │ │ │
┌───┼──┐ ┌───┴──┐ ┌───┼──┐ ┌───┼──┐
│Port 0│ │Port 1│ │Port 2│ │Port 3│
└──────┘ └──────┘ └──────┘ └──────┘
If multiple PFs issue Tx timestamp requests near simultaneously, it is
possible that the correct PF will not be interrupted and will miss its
timestamp. Understanding why is somewhat complex.
Consider the following sequence of events:
CPU 0:
Send Tx packet on PF 0
...
PF 0 enqueues packet with Tx request CPU 1, PF1:
... Send Tx packet on PF1
... PF 1 enqueues packet with Tx request
HW:
PHY Port 0 sends packet
PHY raises Tx timestamp event interrupt
MAC raises each PF interrupt
CPU 0, PF0: CPU 1, PF1:
ice_misc_intr() checks for Tx timestamps ice_misc_intr() checks for Tx timestamp
Sees packet ready bit set Sees nothing available
... Exits
...
...
HW:
PHY port 1 sends packet
PHY interrupt ignored because not all packet timestamps read yet.
...
Read timestamp, report to stack
Because the interrupt event is shared for all ports on the same quad, the
PHY will not raise a new interrupt for any PF until all timestamps are
read.
In the example above, the second timestamp comes in for port 1 before the
timestamp from port 0 is read. At this point, there is no longer an
interrupt thread running that will read the timestamps, because each PF has
checked and found that there was no work to do. Applications such as ptp4l
will timeout after waiting a few milliseconds. Eventually, the watchdog
service task will re-check for all quads and notice that there are
outstanding timestamps, and issue a software interrupt to recover. However,
by this point it is far too late, and applications have already failed.
All of this occurs because of the underlying hardware behavior. The PHY
cannot raise a new interrupt signal until all outstanding timestamps have
been read.
As a first step to fix this, switch the E825C hardware to the
ICE_PTP_TX_INTERRUPT_ALL mode. In this mode, only the clock owner PF will
respond to the PFINT_TSYN_TX cause. Other PFs disable this cause and will
not wake. In this mode, the clock owner will iterate over all ports and
handle timestamps for each connected port.
This matches the E822 behavior, and is a necessary but insufficient step to
resolve the missing timestamps.
Even with use of the ICE_PTP_TX_INTERRUPT_ALL mode, we still sometimes miss
a timestamp event. The ice_ptp_tx_tstamp_owner() does re-check the ready
bitmap, but does so before re-enabling the OICR interrupt vector. It also
only checks the ready bitmap, but not the software Tx timestamp tracker.
To avoid risk of losing a timestamp, refactor the logic to check both the
software Tx timestamp tracker bitmap *and* the hardware ready bitmap.
Additionally, do this outside of ice_ptp_process_ts() after we have already
re-enabled the OICR interrupt.
Remove the checks from the ice_ptp_tx_tstamp(), ice_ptp_tx_tstamp_owner(),
and the ice_ptp_process_ts() functions. This results in ice_ptp_tx_tstamp()
being nothing more than a wrapper around ice_ptp_process_tx_tstamp() so we
can remove it.
Add the ice_ptp_tx_tstamps_pending() function which returns a boolean
indicating if there are any pending Tx timestamps. First, check the
software timestamp tracker bitmap. In ICE_PTP_TX_INTERRUPT_ALL mode, check
*all* ports software trackers. If a tracker has outstanding timestamp
requests, return true. Additionally, check the PHY ready bitmap to confirm
if the PHY indicates any outstanding timestamps.
In the ice_misc_thread_fn(), call ice_ptp_tx_tstamps_pending() just before
returning from the IRQ thread handler. If it returns true, write to
PFINT_OICR to trigger a PFINT_OICR_TSYN_TX_M software interrupt. This will
force the handler to interrupt again and complete the work even if the PHY
hardware did not interrupt for any reason.
This results in the following new flow for handling Tx timestamps:
1) send Tx packet
2) PHY captures timestamp
3) PHY triggers MAC interrupt
4) clock owner executes ice_misc_intr() with PFINT_OICR_TSYN_TX flag set
5) ice_ptp_ts_irq() returns IRQ_WAKE_THREAD
7) The interrupt thread wakes up and kernel calls ice_misc_intr_thread_fn()
8) ice_ptp_process_ts() is called to handle any outstanding timestamps
9) ice_irq_dynamic_ena() is called to re-enable the OICR hardware interrupt
cause
10) ice_ptp_tx_tstamps_pending() is called to check if we missed any more
outstanding timestamps, checking both software and hardware indicators.
With this change, it should no longer be possible for new timestamps to
come in such a way that we lose an interrupt. If a timestamp comes in
before the ice_ptp_tx_tstamps_pending() call, it will be noticed by at
least one of the software bitmap check or the hardware bitmap check. If the
timestamp comes in *after* this check, it should cause a timestamp
interrupt as we have already read all timestamps from the PHY and the OICR
vector has been re-enabled.
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99854c167c ]
Modify PTP (Precision Time Protocol) configuration on link down flow.
Previously, PHY_REG_TX_OFFSET_READY register was cleared in such case.
This register is used to determine if the timestamp is valid or not on
the hardware side.
However, there is a possibility that there is still the packet in the
HW queue which originally was supposed to be timestamped but the link
is already down and given register is cleared.
This potentially might lead to the situation in which that 'delayed'
packet's timestamp is treated as invalid one when the link is up
again.
This in turn leads to the situation in which the driver is not able to
effectively clean timestamp memory and interrupt configuration.
From the hardware perspective, that 'old' interrupt was not handled
properly and even if new timestamp packets are processed, no new
interrupts is generated. As a result, providing timestamps to the user
applications (like ptp4l) is not possible.
The solution for this problem is implemented at the driver level rather
than the firmware, and maintains the tx_ready bit high, even during
link down events. This avoids entering a potential inconsistent state
between the driver and the timestamp hardware.
Testing hints:
- run PTP traffic at higher rate (like 16 PTP messages per second)
- observe ptp4l behaviour at the client side in the following
conditions:
a) trigger link toggle events. It needs to be physiscal
link down/up events
b) link speed change
In all above cases, PTP processing at ptp4l application should resume
always. In failure case, the following permanent error message in ptp4l
log was observed:
controller-0 ptp4l: err [6175.116] ptp4l-legacy timed out while polling
for tx timestamp
Fixes: 7cab44f1c3 ("ice: Introduce ETH56G PHY model for E825C products")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31a7a0bbeb ]
The IRQ handler extracts if_id from the upper 16 bits of the hardware
status register and uses it to index into ethsw->ports[] without
validation. Since if_id can be any 16-bit value (0-65535) but the ports
array is only allocated with sw_attr.num_ifs elements, this can lead to
an out-of-bounds read potentially.
Add a bounds check before accessing the array, consistent with the
existing validation in dpaa2_switch_rx().
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 24ab724f8a ("dpaa2-switch: use the port index in the IRQ handler")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/SYBPR01MB7881D420AB43FF1A227B84AFAF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cbba46934 ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review.
Fixes: 846b46873e ("liquidio CN23XX: VF offload features")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-4-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8558aef4e8 ]
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review.
Fixes: f21fb3ed36 ("Add support of Cavium Liquidio ethernet adapters")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-3-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 926ede0c85 ]
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: c33c997346 ("liquidio: enhanced ethtool --set-channels feature")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260128154440.278369-2-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed48a84a72 ]
The driver allocates arrays for ports, FDBs, and filter blocks using
kcalloc() with ethsw->sw_attr.num_ifs as the element count. When the
device reports zero interfaces (either due to hardware configuration
or firmware issues), kcalloc(0, ...) returns ZERO_SIZE_PTR (0x10)
instead of NULL.
Later in dpaa2_switch_probe(), the NAPI initialization unconditionally
accesses ethsw->ports[0]->netdev, which attempts to dereference
ZERO_SIZE_PTR (address 0x10), resulting in a kernel panic.
Add a check to ensure num_ifs is greater than zero after retrieving
device attributes. This prevents the zero-sized allocations and
subsequent invalid pointer dereference.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 0b1b713704 ("staging: dpaa2-switch: handle Rx path on control interface")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/SYBPR01MB7881BEABA8DA896947962470AF91A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 383d89699c upstream.
In 2009, commit c82f63e411 ("PCI: check saved state before restore")
changed the behavior of pci_restore_state() such that it became necessary
to call pci_save_state() afterwards, lest recovery from subsequent PCI
errors fails.
The commit has just been reverted and so all the pci_save_state() after
pci_restore_state() calls that have accumulated in the tree are now
superfluous. Drop them.
Two drivers chose a different approach to achieve the same result:
drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the
pci_dev's "state_saved" flag to true before calling pci_restore_state().
Drop this as well.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # qat
Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de
Cc: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3125fc1701 upstream.
The driver never programs the MAC frame size and jabber registers,
causing the hardware to reject frames larger than the default 1518
bytes even when larger DMA buffers are allocated.
Program MAC_MAXIMUM_FRAME_SIZE, MAC_TRANSMIT_JABBER_SIZE, and
MAC_RECEIVE_JABBER_SIZE based on the configured MTU. Also fix the
maximum buffer size from 4096 to 4095, since the descriptor buffer
size field is only 12 bits. Account for double VLAN tags in frame
size calculations.
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Cc: stable@vger.kernel.org
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Link: https://patch.msgid.link/20260130102301.477514-1-tmshlvck@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0b5dc73a3 upstream.
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/496
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 496 Comm: rpcbind Not tainted 6.19.0-rc6-next-20260122-yocto-standard+ #8 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0xd8
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x5
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-1-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b8c878d11 upstream.
Commit 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.") removed the RTNL lock for
IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP operations. However, this
change triggered the following call trace on my BeagleBone Black board:
WARNING: net/8021q/vlan_core.c:236 at vlan_for_each+0x120/0x124, CPU#0: rpcbind/481
RTNL: assertion failed at net/8021q/vlan_core.c (236)
Modules linked in:
CPU: 0 UID: 997 PID: 481 Comm: rpcbind Not tainted 6.19.0-rc7-next-20260130-yocto-standard+ #35 PREEMPT
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x28/0x2c
show_stack from dump_stack_lvl+0x30/0x38
dump_stack_lvl from __warn+0xb8/0x11c
__warn from warn_slowpath_fmt+0x130/0x194
warn_slowpath_fmt from vlan_for_each+0x120/0x124
vlan_for_each from cpsw_add_mc_addr+0x54/0x98
cpsw_add_mc_addr from __hw_addr_ref_sync_dev+0xc4/0xec
__hw_addr_ref_sync_dev from __dev_mc_add+0x78/0x88
__dev_mc_add from igmp6_group_added+0x84/0xec
igmp6_group_added from __ipv6_dev_mc_inc+0x1fc/0x2f0
__ipv6_dev_mc_inc from __ipv6_sock_mc_join+0x124/0x1b4
__ipv6_sock_mc_join from do_ipv6_setsockopt+0x84c/0x1168
do_ipv6_setsockopt from ipv6_setsockopt+0x88/0xc8
ipv6_setsockopt from do_sock_setsockopt+0xe8/0x19c
do_sock_setsockopt from __sys_setsockopt+0x84/0xac
__sys_setsockopt from ret_fast_syscall+0x0/0x54
This trace occurs because vlan_for_each() is called within
cpsw_ndo_set_rx_mode(), which expects the RTNL lock to be held.
Since modifying vlan_for_each() to operate without the RTNL lock is not
straightforward, and because ndo_set_rx_mode() is invoked both with and
without the RTNL lock across different code paths, simply adding
rtnl_lock() in cpsw_ndo_set_rx_mode() is not a viable solution.
To resolve this issue, we opt to execute the actual processing within
a work queue, following the approach used by the icssg-prueth driver.
Please note: To reproduce this issue, I manually reverted the changes to
am335x-bone-common.dtsi from commit c477358e66 ("ARM: dts: am335x-bone:
switch to new cpsw switch drv") in order to revert to the legacy cpsw
driver.
Fixes: 1767bb2d47 ("ipv6: mcast: Don't hold RTNL for IPV6_ADD_MEMBERSHIP and MCAST_JOIN_GROUP.")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260203-bbb-v5-2-ea0ea217a85c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7db85d579 upstream.
The gve driver's "rx_dropped" statistic, exposed via `ethtool -S`,
incorrectly includes `rx_buf_alloc_fail` counts. These failures
represent an inability to allocate receive buffers, not true packet
drops where a received packet is discarded. This misrepresentation can
lead to inaccurate diagnostics.
This patch rectifies the ethtool "rx_dropped" calculation. It removes
`rx_buf_alloc_fail` from the total and adds `xdp_tx_errors` and
`xdp_redirect_errors`, which represent legitimate packet drops within
the XDP path.
Cc: stable@vger.kernel.org
Fixes: 433e274b8f ("gve: Add stats for gve.")
Signed-off-by: Max Yuan <maxyuan@google.com>
Reviewed-by: Jordan Rhee <jordanrhee@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Matt Olson <maolson@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-3-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b9ebcce02 upstream.
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC.
Cc: stable@vger.kernel.org
Fixes: 24aeb56f2d ("gve: Add Gvnic stats AQ command and ethtool show/set-priv-flags.")
Signed-off-by: Debarghya Kundu <debarghyak@google.com>
Reviewed-by: Joshua Washington <joshwash@google.com>
Signed-off-by: Harshitha Ramamurthy <hramamurthy@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260202193925.3106272-2-hramamurthy@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 011be342dd ]
Commit a5e400a985 ("net/mlx5e: Honor user choice of IPsec replay
window size") introduced logic to setup the ESN replay window size.
This logic is only valid for packet offload.
However, the check to skip this block only covered outbound offloads.
It was not skipped for crypto offload, causing it to fall through to
the new switch statement and trigger its WARN_ON default case (for
instance, if a window larger than 256 bits was configured).
Fix this by amending the condition to also skip the replay window
setup if the offload type is not XFRM_DEV_OFFLOAD_PACKET.
Fixes: a5e400a985 ("net/mlx5e: Honor user choice of IPsec replay window size")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6b03097f9 ]
Move event init/cleanup outside of mlx5_init_one() / mlx5_uninit_one()
and into the mlx5_mdev_init() / mlx5_mdev_uninit() functions.
By doing this, we avoid the events being reinitialized on devlink reload
and, more importantly, the events->sw_nh notifier chain becomes
available earlier in the init procedure, which will be used in
subsequent patches. This makes sense because the events struct is pure
software, independent of any HW details.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a8f930b7be ("net/mlx5: Fix vhca_id access call trace use before alloc")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2610a3d656 ]
The capability check for reset_root_to_default was inverted, causing
the function to return -EOPNOTSUPP when the capability IS supported,
rather than when it is NOT supported.
Fix the capability check condition.
Fixes: 3c9c34c32b ("net/mlx5: fs, Command to control TX flow table root")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1769503961-124173-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 476681f10c ]
The driver's ndo_get_stats64 callback is only reporting mlx5 counters,
without accounting for the netdev stats, causing errors from the network
stack to be invisible in statistics.
Add netdev_stats_to_stats64() call to first populate the counters, then
add mlx5 counters on top, ensuring both are accounted for (where
appropriate).
Fixes: f62b8bb8f2 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1769411695-18820-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05faf2c0a7 ]
Since the beginning, the Intel ice driver has counted receive checksum
offload mismatches into the rx_errors member of the rtnl_link_stats64
struct. In ethtool -S these show up as rx_csum_bad.nic.
I believe counting these in rx_errors is fundamentally wrong, as it's
pretty clear from the comments in if_link.h and from every other statistic
the driver is summing into rx_errors, that all of them would cause a
"hardware drop" except for the UDP checksum mismatch, as well as the fact
that all the other causes for rx_errors are L2 reasons, and this L4 UDP
"mismatch" is an outlier.
A last nail in the coffin is that rx_errors is monitored in production and
can indicate a bad NIC/cable/Switch port, but instead some random series of
UDP packets with bad checksums will now trigger this alert. This false
positive makes the alert useless and affects us as well as other companies.
This packet with presumably a bad UDP checksum is *already* passed to the
stack, just not marked as offloaded by the hardware/driver. If it is
dropped by the stack it will show up as UDP_MIB_CSUMERRORS.
And one more thing, none of the other Intel drivers, and at least bnxt_en
and mlx5 both don't appear to count UDP offload mismatches as rx_errors.
Here is a related customer complaint:
https://community.intel.com/t5/Ethernet-Products/ice-rx-errros-is-too-sensitive-to-IP-TCP-attack-packets-Intel/td-p/1662125
Fixes: 4f1fe43c92 ("ice: Add more Rx errors to netdev's rx_error counter")
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Jake Keller <jacob.e.keller@intel.com>
Cc: IWL <intel-wired-lan@lists.osuosl.org>
Signed-off-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 100cf7b4ca ]
hw->aci.lock is already initialized in ixgbe_sw_init(), so
ixgbe_recovery_probe() doesn't need to initialize the lock. This
function is also not responsible for destroying the lock on failures.
Additionally, change the name of label in accordance with this change.
Fixes: 29cb3b8d95 ("ixgbe: add E610 implementation of FW recovery mode")
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/intel-wired-lan/aTcFhoH-z2btEKT-@horms.kernel.org/
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 638344712a ]
When ixgbe_recovery_probe() is invoked and this function fails,
allocated resources in advance are not completely freed, because
ixgbe_probe() returns ixgbe_recovery_probe() directly and
ixgbe_recovery_probe() only frees partial resources, resulting in memory
leaks including:
- adapter->io_addr
- adapter->jump_tables[0]
- adapter->mac_table
- adapter->rss_key
- adapter->af_xdp_zc_qps
The leaked MMIO region can be observed in /proc/vmallocinfo, and the
remaining leaks are reported by kmemleak.
Don't return ixgbe_recovery_probe() directly, and instead let
ixgbe_probe() to clean up resources on failures.
Fixes: 29cb3b8d95 ("ixgbe: add E610 implementation of FW recovery mode")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c84959167 ]
Some PHYs stop the refclk for power saving, usually while link down.
This causes reading stats to time out.
Therefore, in emac_stats_update(), also don't update and reschedule if
!netif_carrier_ok(). But that means we could be missing later updates if
the link comes back up, so also reschedule when link up is detected in
emac_adjust_link().
While we're at it, improve the comments and error message prints around
this to reflect the better understanding of how this could happen.
Hopefully if this happens again on new hardware, these comments will
direct towards a solution.
Closes: https://lore.kernel.org/r/20260119141620.1318102-1-amadeus@jmu.edu.cn/
Fixes: bfec6d7f20 ("net: spacemit: Add K1 Ethernet MAC")
Co-developed-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20260123-k1-ethernet-clarify-stat-timeout-v3-1-93b9df627e87@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d7ba71e46 ]
In rocker_world_port_pre_init(), rocker_port->wpriv is allocated with
kzalloc(wops->port_priv_size, GFP_KERNEL). However, in
rocker_world_port_post_fini(), the memory is only freed when
wops->port_post_fini callback is set:
if (!wops->port_post_fini)
return;
wops->port_post_fini(rocker_port);
kfree(rocker_port->wpriv);
Since rocker_ofdpa_ops does not implement port_post_fini callback
(it is NULL), the wpriv memory allocated for each port is never freed
when ports are removed. This leads to a memory leak of
sizeof(struct ofdpa_port) bytes per port on every device removal.
Fix this by always calling kfree(rocker_port->wpriv) regardless of
whether the port_post_fini callback exists.
Fixes: e420114eef ("rocker: introduce worlds infrastructure")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260123211030.2109-2-qikeyu2017@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca12c4a155 ]
The function mlx5_esw_vport_vhca_id() is declared to return bool,
but returns -EOPNOTSUPP (-45), which is an int error code. This
causes a signedness bug as reported by smatch.
This patch fixes this smatch report:
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h:981 mlx5_esw_vport_vhca_id()
warn: signedness bug returning '(-45)'
Fixes: 1baf304265 ("net/mlx5: E-Switch, Set/Query hca cap via vhca id")
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Zeng Chi <zengchi@kylinos.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260123085749.1401969-1-zeng_chi911@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09f979d1f3 ]
In mvpp2_ethtool_cls_rule_ins(), the ethtool_rule is allocated by
ethtool_rx_flow_rule_create(). If the subsequent conversion to flow
type fails, the function jumps to the clean_rule label.
However, the clean_rule label only frees efs, skipping the cleanup
of ethtool_rule, which leads to a memory leak.
Fix this by jumping to the clean_eth_rule label, which properly calls
ethtool_rx_flow_rule_destroy() before freeing efs.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: f4f1ba1819 ("net: mvpp2: cls: Report an error for unsupported flow types")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260123065716.2248324-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 944c614b0a ]
Since cited commit, core locks the net_device's rss_lock when handling
ethtool -x command, so driver's implementation should not lock it
again. Remove the latter.
Fixes: 040cef30b5 ("net: ethtool: move get_rxfh callback under the rss_lock")
Reported-by: Damir Mansurov <damir.mansurov@oktetlabs.ru>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1126015
Suggested-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20260123161634.1215006-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8016dc5ee1 ]
In octep_device_setup(), if octep_ctrl_net_init() fails, the function
returns directly without unmapping the mapped resources and freeing the
allocated configuration memory.
Fix this by jumping to the unsupported_dev label, which performs the
necessary cleanup. This aligns with the error handling logic of other
paths in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 577f0d1b1c ("octeon_ep: add separate mailbox command and response queues")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130551.3717090-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6de4436bf3 ]
We are not deregistering the fixed phy link when hitting the early
exit condition. Add the correct early exit sequence.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194001.1098859-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108948f723 ]
In esw_acl_ingress_lgcy_setup(), if esw_acl_table_create() fails,
the function returns directly without releasing the previously
created counter, leading to a memory leak.
Fix this by jumping to the out label instead of returning directly,
which aligns with the error handling logic of other paths in this
function.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 07bab95026 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260120134640.2717808-1-zilin@seu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3d778e65b4 upstream.
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aa ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca1bb3fedf upstream.
The MAX_FL (maximum frame length) and related calculations used ETH_HLEN,
which does not account for the 4-byte VLAN tag in tagged frames. This
caused the hardware to reject valid VLAN frames as oversized, resulting
in RX errors and dropped packets.
Use VLAN_ETH_HLEN instead of ETH_HLEN in the MAX_FL register setup,
cut-through mode threshold, buffer allocation, and max_mtu calculation.
Cc: stable@kernel.org # v6.18+
Fixes: 62b5bb7be7 ("net: fec: update MAX_FL based on the current MTU")
Fixes: d466c16026 ("net: fec: enable the Jumbo frame support for i.MX8QM")
Fixes: 59e9bf037d ("net: fec: add change_mtu to support dynamic buffer allocation")
Fixes: ec2a1681ed ("net: fec: use a member variable for maximum buffer size")
Signed-off-by: Clemens Gruber <mail@clemensgruber.at>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260121083751.66997-1-mail@clemensgruber.at
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d998b0e5af upstream.
0 is a valid DMA address [1] so using it as the error value can lead to
errors. The error value of dma_map_XXX() functions is DMA_MAPPING_ERROR
which is ~0. The callers of otx2_dma_map_page() use dma_mapping_error()
to test the return value of otx2_dma_map_page(). This means that they
would not detect an error in otx2_dma_map_page().
Make otx2_dma_map_page() return the raw value of dma_map_page_attrs().
[1] https://lore.kernel.org/all/f977f68b-cec5-4ab7-b4bd-2cf6aca46267@intel.com
Fixes: caa2da34fd ("octeontx2-pf: Initialize and config queues")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260114123107.42387-2-fourier.thomas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fb2bb2a1eb ]
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12 ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbb11b8d75 ]
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8215794403 ]
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf8de9c6b ]
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
