[ Upstream commit 9415f749d3 ]
handle_pmi_common() may observe an active bit set in cpuc->active_mask
while the corresponding cpuc->events[] entry has already been cleared,
which leads to a NULL pointer dereference.
This can happen when interrupt throttling stops all events in a group
while PEBS processing is still in progress. perf_event_overflow() can
trigger perf_event_throttle_group(), which stops the group and clears
the cpuc->events[] entry, but the active bit may still be set when
handle_pmi_common() iterates over the events.
The following recent fix:
7e772a93eb ("perf/x86: Fix NULL event access and potential PEBS record loss")
moved the cpuc->events[] clearing from x86_pmu_stop() to x86_pmu_del() and
relied on cpuc->active_mask/pebs_enabled checks. However,
handle_pmi_common() can still encounter a NULL cpuc->events[] entry
despite the active bit being set.
Add an explicit NULL check on the event pointer before using it,
to cover this legitimate scenario and avoid the NULL dereference crash.
Fixes: 7e772a93eb ("perf/x86: Fix NULL event access and potential PEBS record loss")
Reported-by: kitta <kitta@linux.alibaba.com>
Co-developed-by: kitta <kitta@linux.alibaba.com>
Signed-off-by: Evan Li <evan.li@linux.alibaba.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20251212084943.2124787-1-evan.li@linux.alibaba.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220855
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb924a721 ]
In the inline assembly inside load_unaligned_zeropad(), the "addr" is
constrained as input-only operand. The compiler assumes that on exit
from the asm statement these operands contain the same values as they
had before executing the statement, but when kernel page fault happened, the assembly fixup code "bic %2 %2, #0x3" modify the value of "addr", which may lead to an unexpected behavior.
Use a temporary variable "tmp" to handle it, instead of modifying the
input-only operand, just like what arm64's load_unaligned_zeropad()
does.
Fixes: b9a50f7490 ("ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs")
Co-developed-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Xie Yuanbin <xieyuanbin1@huawei.com>
Signed-off-by: Liyuan Pang <pangliyuan1@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5efd56fa1 ]
The rodata=on security measure requires that any code path which does
vmalloc -> set_memory_ro/set_memory_rox must protect the linear map alias
too. Therefore, if such a call fails, we must abort set_memory_* and caller
must take appropriate action; currently we are suppressing the error, and
there is a real chance of such an error arising post commit a166563e7e
("arm64: mm: support large block mapping when rodata=full"). Therefore,
propagate any error to the caller.
Fixes: a166563e7e ("arm64: mm: support large block mapping when rodata=full")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce48af13e6 ]
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ff147fdfa ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97cc9c346b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01 ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 863d69923b ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97aee67e24 ]
Commit 8c3170628a ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa68 ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ab6f9466 ]
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c15 ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a74b6c0e53 ]
In order to work around the existence of a vmap symbol in libpcap, the
UML makefile unconditionally redefines vmap to kernel_vmap. However,
this not only affects the actual vmap symbol, but also anything else
named vmap, including a number of struct members in DRM.
This would not be too much of a problem, since all uses are also
updated, except we now have Rust DRM bindings, which expect the
corresponding Rust structs to have 'vmap' names. Since the redefinition
applies in bindgen, but not to Rust code, we end up with errors such as:
error[E0560]: struct `drm_gem_object_funcs` has no fields named `vmap`
--> rust/kernel/drm/gem/mod.rs:210:9
Since libpcap support was removed in commit 12b8e7e69a ("um: Remove
obsolete pcap driver"), remove the, now unnecessary, define as well.
We also take this opportunity to update the comment.
Signed-off-by: David Gow <davidgow@google.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://patch.msgid.link/20251122083213.3996586-1-davidgow@google.com
Fixes: 12b8e7e69a ("um: Remove obsolete pcap driver")
[adjust commmit message a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 974555d6e4 ]
When executing HLV* instructions at the HS mode, a guest page fault
may occur when a g-stage page table migration between triggering the
virtual instruction exception and executing the HLV* instruction.
This may be a corner case, and one simpler way to handle this is to
re-execute the instruction where the virtual instruction exception
occurred, and the guest page fault will be automatically handled.
Fixes: b91f0e4cb8 ("RISC-V: KVM: Factor-out instruction emulation into separate sources")
Signed-off-by: Fangyu Yu <fangyu.yu@linux.alibaba.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251121133543.46822-1-fangyu.yu@linux.alibaba.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eae40a6da6 ]
HPTE format was changed since Power9 (ISA 3.0) onwards. While dumping
kernel hash page tables, nothing gets printed on powernv P9+. This patch
utilizes the helpers added in the patch tagged as fixes, to convert new
format to old format and dump the hptes. This fix is only needed for
native_find() (powernv), since pseries continues to work fine with the
old format.
Fixes: 6b243fcfb5 ("powerpc/64: Simplify adaptation to new ISA v3.00 HPTE format")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/4c2bb9e5b3cfbc0dd80b61b67cdd3ccfc632684c.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17b45ccf09 ]
When HV=0 & IR/DR=0, the Hash MMU is said to be in Virtual Real
Addressing Mode during early boot. During this, we should ensure that
memory region allocations for stress_hpt_struct should happen from
within RMA region as otherwise the boot might get stuck while doing
memset of this region.
History behind why do we have RMA region limitation is better explained
in these 2 patches [1] & [2]. This patch ensures that memset to
stress_hpt_struct during early boot does not cross ppc64_rma_size
boundary.
[1]: https://lore.kernel.org/all/20190710052018.14628-1-sjitindarsingh@gmail.com/
[2]: https://lore.kernel.org/all/87wp54usvj.fsf@linux.vnet.ibm.com/
Fixes: 6b34a099fa ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/ada1173933ea7617a994d6ee3e54ced8797339fc.1761834163.git.ritesh.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c92d36b0b ]
For BT use cases, pins are configured with pull-up state in sleep state
to avoid noise. If IRQ type is configured as level high and the GPIO line
is also in a high state, it causes continuous interrupt assertions leading
to an IRQ storm when wakeup irq enables at system suspend/runtime suspend.
Switching to edge-triggered interrupt (IRQ_TYPE_EDGE_FALLING) resolves
this by only triggering on state transitions (high-to-low) rather than
maintaining sensitivity to the static level state, effectively preventing
the continuous interrupt condition and eliminating the wakeup IRQ storm.
Fixes: 9380e0a1d4 ("arm64: dts: qcom: qrb2210-rb1: add Bluetooth support")
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251110101043.2108414-2-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc184cb1b ]
arch_add_memory() is used to hotplug memory into a system but as a part
of its implementation it calls __create_pgd_mapping(), which uses
pgtable_alloc() in order to build intermediate page tables. As this path
was initally only used during early boot pgtable_alloc() is designed to
BUG_ON() on failure. However, in the event that memory hotplug is
attempted when the system's memory is extremely tight and the allocation
were to fail, it would lead to panicking the system, which is not
desirable. Hence update __create_pgd_mapping and all it's callers to be
non void and propagate -ENOMEM on allocation failure to allow system to
fail gracefully.
But during early boot if there is an allocation failure, we want the
system to panic, hence create a wrapper around __create_pgd_mapping()
called early_create_pgd_mapping() which is designed to panic, if ret
is non zero value. All the init calls are updated to use this wrapper
rather than the modified __create_pgd_mapping() to restore
functionality.
Fixes: 4ab2150615 ("arm64: Add memory hotplug support")
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Signed-off-by: Linu Cherian <linu.cherian@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10e1c77c36 ]
Commit b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C
exception exit from ppc64") erroneouly copied to powerpc/32 the logic
from powerpc/64 based on feature CPU_FTR_STCX_CHECKS_ADDRESS which is
always 0 on powerpc/32.
Re-instate the logic implemented by commit b64f87c16f ("[POWERPC]
Avoid unpaired stwcx. on some processors") which is based on
CPU_FTR_NEED_PAIRED_STWCX feature.
Fixes: b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C exception exit from ppc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6040b5dbcf5cdaa1cd919fcf0790f12974ea6e5a.1757666244.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7afe2383ef ]
The elfcorehdr segment in the kdump image stores information about the
memory regions (called crash memory ranges) that the kdump kernel must
capture.
When a memory hot-remove event occurs, the kernel regenerates the
elfcorehdr for the currently loaded kdump image to remove the
hot-removed memory from the crash memory ranges.
Call chain:
remove_mem_range()
update_crash_elfcorehdr()
arch_crash_handle_hotplug_event()
crash_handle_hotplug_event()
While removing the hot-removed memory from the crash memory ranges in
remove_mem_range(), if the removed memory lies within an existing crash
range, that range is split into two. During this split, the size of the
second range was being calculated incorrectly.
This leads to dump capture failure with makedumpfile with below error:
$ makedumpfile -l -d 31 /proc/vmcore /tmp/vmcore
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:16
validate_mem_section: Can't read mem_section array.
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:8
get_mm_sparsemem: Can't get the address of mem_section.
The updated crash memory range in PT_LOAD entry is holding incorrect
data (checkout FileSiz and MemSiz):
readelf -a /proc/vmcore
<snip...>
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000b013d0000 0xc000000b80000000 0x0000000b80000000
0xffffffffc0000000 0xffffffffc0000000 RWE 0x0
<snip...>
Update the size calculation for the new crash memory range to fix this
issue.
Note: This problem will not occur if the kdump kernel is loaded or
reloaded after a memory hot-remove operation.
Fixes: 849599b702 ("powerpc/crash: add crash memory hotplug support")
Reported-by: Shirisha G <shirisha@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251105033941.1752287-1-sourabhjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e40b061cd3 ]
Move st,adc-freq, st,mod-12b, st,ref-sel, and st,sample-time properties
from the touchscreen subnode to the parent touch@44 node. These properties
are defined in the st,stmpe.yaml schema for the parent node, not the
touchscreen subnode, resolving the validation error about unevaluated
properties.
Fixes: 27538a18a4 ("ARM: dts: stm32: add STM32MP1-based Phytec SoM")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250915224611.169980-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e4e355ae7 ]
current large PEBS flag check only checks if sample_regs_user contains
unsupported GPRs but doesn't check if sample_regs_intr contains
unsupported GPRs.
Of course, currently PEBS HW supports to sample all perf supported GPRs,
the missed check doesn't cause real issue. But it won't be true any more
after the subsequent patches support to sample SSP register. SSP
sampling is not supported by adaptive PEBS HW and it would be supported
until arch-PEBS HW. So correct this issue.
Fixes: a47ba4d77e ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-5-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e772a93eb ]
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.
While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.
perf_event_overflow()
-> __perf_event_overflow()
->__perf_event_account_interrupt()
-> perf_event_throttle_group()
-> perf_event_throttle()
-> event->pmu->stop()
-> x86_pmu_stop()
The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.
Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.
To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[].
Closes: https://lore.kernel.org/oe-lkp/202507042103.a15d2923-lkp@intel.com
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-3-dapeng1.mi@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf90d1b69 ]
The Radxa ROCK 5B+/5T USB Type-C port supports Dual Role Data and
should also act as a host. However, currently, when acting as a host,
only self-powered devices work.
Since the ROCK 5B+ supports Dual Role Power, set the power-role
property to "dual" and the try-power-role property to "sink". (along
with related properties)
The ROCK 5T should only support the "source" power-role.
This allows the port to act as a host, supply power to the port, and
allow bus-powered devices to work.
Note that on the ROCK 5T, with this patch applied, it has been
observed that some bus-powered devices do not work correctly. Also,
it has been observed that after connecting a device (and the data-role
switches to host), connecting a host device does not switch the
data-role back to the device role. These issues should be addressed
separately.
Note that there is a separate known issue where USB 3.0 SuperSpeed
devices do not work when oriented in reverse. This issue should also be
addressed separately. (USB 2.0/1.1 devices work in both orientations)
Fixes: 67b2c15d8f ("arm64: dts: rockchip: add USB-C support for ROCK 5B/5B+/5T")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://patch.msgid.link/20251104085227.820-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb22663125 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags. Bits above the
physical address width of the system i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The PGD entry is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: e9d0e6330e ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/a482fd68-ce54-472d-8df1-33d6ac9f6bb5@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21ef26d0e7 ]
When the PCIe controller is running in endpoint mode, the controller
initialization is triggered by a PERST# (PCIe reset) GPIO deassertion.
The driver has configured an IRQ to trigger when the PERST# GPIO changes
state. Without the pinctrl definition, we do not get an IRQ when PERST#
is deasserted, so the PCIe controller never gets initialized.
Add the missing definitions, so that the controller actually gets
initialized.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Fixes: 0580286d0d ("arm64: tegra: Add Tegra234 PCIe C4 EP definition")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[treding@nvidia.com: add blank lines to separate blocks]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3862123e9b ]
The "ti,twl4030-power-n900" compatible string is obsolete and is not
supported by any in-kernel driver. Currently, the kernel falls back to
the second entry, "ti,twl4030-power-idle-osc-off", to bind a driver to
this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: daebabd578 ("mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7f3bc1830 ]
The "ti,twl4030-power-beagleboard-xm" compatible string is obsolete and
is not supported by any in-kernel driver. Currently, the kernel falls
back to the second entry, "ti,twl4030-power-idle-osc-off", to bind a
driver to this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: 9188883fd6 ("ARM: dts: Enable twl4030 off-idle configuration for selected omaps")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c95fc710b ]
Without a serial console speed specified in chosen/stdout-path in the
DTB, the serial console uses the default speed of the serial driver,
unless explicitly overridden in a legacy console= kernel command-line
parameter.
After dropping "ti,omap3-uart" from the list of compatible values in DT,
AM33xx serial ports can no longer be used with the legacy OMAP serial
driver, but only with the OMAP-flavored 8250 serial driver (which is
mutually-exclusive with the former). However, replacing
CONFIG_SERIAL_OMAP=y by CONFIG_SERIAL_8250_OMAP=y (with/without enabling
CONFIG_SERIAL_8250_OMAP_TTYO_FIXUP) may not be sufficient to restore
serial console functionality: the legacy OMAP serial driver defaults to
115200 bps, while the 8250 serial driver defaults to 9600 bps, causing
no visible output on the serial console when no appropriate console=
kernel command-line parameter is specified.
Fix this for all AM33xx boards by adding ":115200n8" to
chosen/stdout-path. This requires replacing the "&uartN" reference by
the corresponding "serialN" DT alias.
Fixes: ca8be8fc2c ("ARM: dts: am33xx-l4: fix UART compatible")
Fixes: 077e1cde78 ("ARM: omap2plus_defconfig: Enable 8250_OMAP")
Closes: https://lore.kernel.org/CAMuHMdUb7Jb2=GqK3=Rn+Gv5G9KogcQieqDvjDCkJA4zyX4VcA@mail.gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/63cef5c3643d359e8ec13366ca79377f12dd73b1.1759398641.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 242f7558e7 ]
Add the missing interconnects to the USB2 host. The Fixes tag points to
the commit which broke probing of the USB host on that platform.
Fixes: 130733a100 ("interconnect: qcom: msm8996: Promote to core_initcall")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-2-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 671c852fc5 ]
The I2C pins for some of the instances on J784S4/J742S2/AM69 are
configured as PIN_INPUT_PULLUP while these pins are open-drain type and
do not support internal pull-ups [0][1][2]. The pullup configuration
bits in the corresponding padconfig registers are reserved and any
writes to them have no effect and readback checks on those bits fail.
Update the pinmux settings to use PIN_INPUT instead of PIN_INPUT_PULLUP
to reflect the correct hardware behaviour.
[0]: https://www.ti.com/lit/gpn/tda4ah-q1 (J784S4 Datasheet: Table 5-1. Pin Attributes)
[1]: https://www.ti.com/lit/gpn/tda4ape-q1 (J742S2 Datasheet: Table 5-1. Pin Attributes)
[2]: https://www.ti.com/lit/gpn/am69a (AM69 Datasheet: Table 5-1. Pin Attributes)
Fixes: e20a06aca5 ("arm64: dts: ti: Add support for J784S4 EVM board")
Fixes: 635fb18ba0 ("arch: arm64: dts: Add support for AM69 Starter Kit")
Fixes: 0ec1a48d99 ("arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header")
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20251022122638.234367-1-a-limaye@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced37e9cea ]
When triggering a stack dump via sysrq (echo t > /proc/sysrq-trigger),
KASAN may report false-positive out-of-bounds access:
BUG: KASAN: out-of-bounds in __show_regs+0x4b/0x340
Call Trace:
dump_stack_lvl
print_address_description.constprop.0
print_report
__show_regs
show_trace_log_lvl
sched_show_task
show_state_filter
sysrq_handle_showstate
__handle_sysrq
write_sysrq_trigger
proc_reg_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
The issue occurs as follows:
Task A (walk other tasks' stacks) Task B (running)
1. echo t > /proc/sysrq-trigger
show_trace_log_lvl
regs = unwind_get_entry_regs()
show_regs_if_on_stack(regs)
2. The stack value pointed by
`regs` keeps changing, and
so are the tags in its
KASAN shadow region.
__show_regs(regs)
regs->ax, regs->bx, ...
3. hit KASAN redzones, OOB
When task A walks task B's stack without suspending it, the continuous changes
in task B's stack (and corresponding KASAN shadow tags) may cause task A to
hit KASAN redzones when accessing obsolete values on the stack, resulting in
false positive reports.
Simply stopping the task before unwinding is not a viable fix, as it would
alter the state intended to inspect. This is especially true for diagnosing
misbehaving tasks (e.g., in a hard lockup), where stopping might fail or hide
the root cause by changing the call stack.
Therefore, fix this by disabling KASAN checks during asynchronous stack
unwinding, which is identified when the unwinding task does not match the
current task (task != current).
[ bp: Align arguments on function's opening brace. ]
Fixes: 3b3fa11bc7 ("x86/dumpstack: Print any pt_regs found on the stack")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/all/20251023090632.269121-1-wutengda@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00df14f346 ]
'bus-width' is defined for the corresponding vin input port already.
No need to declare it in the output port again. Fixes:
arch/arm/boot/dts/renesas/r8a7793-gose.dtb: composite-in@20 (adi,adv7180cp): ports:port@3:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250929093616.17679-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67445dc8a8 ]
The qcm2290 CAMSS node has been applied from the V4 series, but a later
version changed the order of the register property, fix it to prevent
dtb check error.
Fixes: 2b3aef30dd ("arm64: dts: qcom: qcm2290: Add CAMSS node")
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250918155456.1158691-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42e56b53a1 ]
The S20 series has additional reserved pins for the fingerprint sensor,
GPIO 20-23. Correct it by adding them into gpio-reserved-ranges.
Fixes: 6657fe9e9f ("arm64: dts: qcom: add initial support for Samsung Galaxy S20 FE")
Signed-off-by: Eric Gonçalves <ghatto404@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251016202129.226449-1-ghatto404@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb48d3f3ab ]
The GPI DMA channels in sc8280xp.dtsi are wrong. Let's fix it.
Origianl patch was rebased to the linux-next and formated to a new
patch again later, then it got the GPI DMA channels in the new patch
shifted.
Fixes: 71b12166a2 ("arm64: dts: qcom: sc8280xp: Describe GPI DMA controller nodes")
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251013115506.103649-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 147d5eefab ]
The commit 458de58424 ("arm64: dts: qcom: x1e80100: move dp0/1/2
data-lanes to SoC dtsi") has landed before this file was added, so
the data-lanes lines here remained.
Remove them to enable 4-lane DP on the X1E Dell Inspiron/Latitude.
Fixes: e7733b4211 ("arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251012224909.14988-1-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bdfe3edd4 ]
The commit a41d23142d ("arm64: dts: qcom: x1e80100-dell-xps13-9345:
Add missing pinctrl for eDP HPD") has applied this change to a very
similar machine, so apply it here too.
This allows us not to rely on the boot firmware to set up the pinctrl
for the eDP HPD line of the internal display.
Fixes: e7733b4211 ("arm64: dts: qcom: Add support for Dell Inspiron 7441 / Latitude 7455")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20251012224706.14311-1-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f404fdcb50 ]
It seems we also need to reserve a region of 81 MiB called "removed_mem"
otherwise we can easily hit memory errors with higher RAM usage.
Fixes: 249666e34c ("arm64: dts: qcom: add QCM6490 SHIFTphone 8")
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-3-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8056a164 ]
Relocate the wake-gpios and perst-gpios properties from the pcie0
controller node to the pcieport0 node. These GPIOs are associated with
the PCIe root port and should reside under the pcieport0 node.
Also rename perst-gpios to reset-gpios to match the expected property name
in the PCIe port node.
Fixes: 141714e163 ("arm64: dts: qcom: sm8750-mtp: Add WiFi and Bluetooth")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251008-sm8750-v1-1-daeadfcae980@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2703c9016 ]
The UFS device is ovbiously dma coherent like the other IOMMU devices
like usb, mmc, ... let's fix this by adding the flag.
To be sure an extensive test has been performed to be sure it's
safe, as downstream uses this flag for UFS as well.
As an experiment, I checked how the dma-coherent could impact
the UFS bandwidth, and it happens the max bandwidth on cached
write is slighly highter (up to 10%) while using less cpu time
since cache sync/flush is skipped.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007-topic-sm8650-upstream-ufs-dma-coherent-v1-1-f3cfeaee04ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
