Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
-----BEGIN PGP SIGNATURE-----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=ztcO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Tt/r
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm Arm64 DeviceTree fixes for v6.19
Add missing power-domains to the SC8280XP RPM power-domain and ensure
these are voted for from the remoteproc instances while powering them
up.
Clear a couple of DeviceTree validation warnings in SM8550 and SM8650
USB controller nodes.
Specify the correct display panel on the OnePlus 6.
Correct the UFS clock mapping on Talos, to ensure UFS is properly
clocked.
Add Abel's old emails address to .mailmap.
* tag 'qcom-arm64-fixes-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
arm64: dts: qcom: sc8280xp: Add missing VDD_MXC links
pmdomain: qcom: rpmhpd: Add MXC to SC8280XP
dt-bindings: power: qcom,rpmpd: Add SC8280XP_MXC_AO
arm64: dts qcom: sdm845-oneplus-enchilada: Specify panel name within the compatible
mailmap: Update email address for Abel Vesa
arm64: dts: qcom: talos: Correct UFS clocks ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the next peripheral, Nano Pi M5 sound was not working correctly, the
adc-keys voltage levels for 2 buttons on the Pinephone Pro were wrong
and a really wrong PCIe linkspeed was removed from helios64.
Apart from that there are a number of dt-cleanlieness fixes.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmlmRpMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdga/NB/4rqhVfKrxotl5AmAdDmJrz86C1Qxa6cOxB
WD011An0u00V0oSARJM0r9Ng7ZpFUy1wf1VpRl4oSKiGWJKdAiJ0IzvUQyy9T7nM
vleEyST80y9t+Xq0ePXzDs3ADDhO5d9g1uJ2E9d+g2rsOFBVUWmUizeqiuY8YRmy
kgaHsz6xrPsvdS+bMHhhgsXdFXOU6TFITLMpliPr6QCBi539R/N6o4cVhh6gK+Fd
4TqoNne3cYiWsOrQ5qf57N3HPQ0sNBk4aikVFb2wrJYsMl+yFGML64CmXzhyfpIb
v4vg3T90l0OontCKJ7/lP4LZdiO47pUSct29o52XJBfty7KpCso1
=XPJU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nISS
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
In terms of bigger fixes, RK3576 GPU register range was overflowing into
the next peripheral, Nano Pi M5 sound was not working correctly, the
adc-keys voltage levels for 2 buttons on the Pinephone Pro were wrong
and a really wrong PCIe linkspeed was removed from helios64.
Apart from that there are a number of dt-cleanlieness fixes.
* tag 'v6.19-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: rockchip: Fix voltage threshold for volume keys for Pinephone Pro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 59a42707a094 ("arm64: tegra: Add interconnect properties for
Tegra210") populated interconnect properties for Tegra210 and this is
preventing the Tegra DRM driver from probing successfully. The following
error is observed on boot ...
drm drm: failed to initialize 54240000.dc: -517
For now revert this change, until a fix is available.
Fixes: 59a42707a094 ("arm64: tegra: Add interconnect properties for Tegra210")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is
board revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all
simple one-line changes.
-----BEGIN PGP SIGNATURE-----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=2kPF
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The main code change is a revert of the Raspberry Pi RP1 overlay
support that was decided to not be ready.
The other fixes are all for devicetree sources:
- ethernet configuration on ixp42x-actiontec-mi424wr is board
revision specific
- validation warning fixes for imx27/imx51/imx6, hikey960 and k3
- Minor corrections across imx8 boards, addressing all types of
issues with interrups, dma, ethernet and clock settings, all simple
one-line changes"
* tag 'soc-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
arm64: dts: hisilicon: hikey960: Drop "snps,gctl-reset-quirk" and "snps,tx_de_emphasis*" properties
Documentation/process: maintainer-soc: Mark 'make' as commands
Documentation/process: maintainer-soc: Be more explicit about defconfig
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
MAINTAINERS: Fix a linusw mail address
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
...
"pinctrl-names" is not valid without a pinctrl-N property.
"max-freq" is not a defined property name. Maybe it was supposed to be
"spi-max-frequency", but changing to that would be a change in behavior.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260108230607.1348879-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The pinctrl node names "gpios" or with "-gpio" suffix collide with GPIO
property names creating false warnings. Add a "-pins?" suffix to avoid
the issue.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260108230623.1349310-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"pinctrl" is not a defined property name. The correct name is
"pinctrl-0".
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[added missing pinctrl-names property]
Link: https://patch.msgid.link/20260108230613.1349060-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"sitronix,st7789v" is not a defined fallback for
"jasonic,jt240mhqs-hwt-ek-e3", so drop it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260108230600.1348699-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
"snps,tx_de_emphasis" is supposed to be a u8, not a u32. Since it is big
endian, 0 will be read rather than 1. The DWC3 Linux driver simply ORs
the value if "snps,tx_de_emphasis_quirk" is set, so the 2 properties
have no effect. (The driver doesn't clear the field either which is
another problem).
"snps,gctl-reset-quirk" is not documented nor used in the driver, so
drop it as well.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260105174002.2997615-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmlUl0EACgkQUFdYWoew
fM4rVAf8CoKCxw3wY6WWGnykrwxb7QNIr1CIfUCJC+6PtSxEsuuwMWmrhsEpvs36
Idh5YXGl89hC/6DYr9NLy6GHKX+pp8TX5ah/bY4gIkRZ9gc3+TuU7qUv/iFkk9Q7
DgpMvE7TUKrLrUvkX4nN5rcLFOODkz3+KrJLLi7D3GOBQA3PEQ31dXBlTRygO/WP
AvaBkbmcCUMM8jpr0b4jcloSwMGunCzI/bpdGrBaFw4peOBCPzhYvAjtE+4FRBX+
QaO11t7VYFSZ1Asqc944vjpNWaqLMzABjaLvOSAsERm5M8vfjkHD4cLJX7yYeCAa
Can4xx7yVHmCzPryWH6Asnpx9BttQg==
=im41
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BjZ2
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.19:
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
* tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.19, please pull the following:
- Andrea fixes the RP1 DeviceTree hierarchy and drop overlay support,
this resolves a number of DTC warnings and other issues
-----BEGIN PGP SIGNATURE-----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=JCKi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=IlUv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM64-SoC Device Tree fixes for
6.19, please pull the following:
- Andrea fixes the RP1 DeviceTree hierarchy and drop overlay support,
this resolves a number of DTC warnings and other issues
* tag 'arm-soc/for-6.19/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: rp1: drop RP1 overlay
arm64: dts: broadcom: bcm2712: fix RP1 endpoint PCI topology
misc: rp1: drop overlay support
dt-bindings: misc: pci1de4,1: add required reg property for endpoint
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to RK3576 TRM part1 Table 1-1 Address Mapping, the size of
the GPU registers is 128 KB.
The current mapping incorrectly includes the addresses of multiple
following IP like the eInk interface at 0x27900000. This has not
been detected by the DT tooling as none of the extra mapped IP is
described in the upstream RK3576 DT so far.
Fixes: 57b1ce9039 ("arm64: dts: rockchip: Add rk3576 SoC base DT")
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260106071513.209-1-kernel@airkyi.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
NanoPi M5 derives its analog sound signal from SAI2 in M0 pin mode, so the
MCLK pin should be configured accordingly for the sound codec to get its
I2S signal from the SoC. Request the required pin config.
The clock itself should also be CLK_SAI2_MCLKOUT_TO_IO for the sound to
work (otherwise there is only silence out of the audio out jack).
Fixes: 96cbdfdd3a ("arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support")
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://patch.msgid.link/20251229-rk3576-sound-v1-2-2f59ef0d19b1@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The commit 616effc027 ("arm64: dts: imx8: Fix lpuart DMA channel
order") swap uart rx and tx channel at common imx8-ss-dma.dtsi. But miss
update imx8qm-ss-dma.dtsi.
The commit 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart
dma-names") just simple add dma-names as binding doc requirement.
Correct lpuart0 - lpuart3 dma rx and tx channels, and use defines for
the FSL_EDMA_RX flag.
Fixes: 5a8e9b022e ("arm64: dts: imx8qm-ss-dma: Pass lpuart dma-names")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add missing 'clocks' property to LAN8740Ai PHY node, to allow the PHY driver
to manage LAN8740Ai CLKIN reference clock supply. This fixes sporadic link
bouncing caused by interruptions on the PHY reference clock, by letting the
PHY driver manage the reference clock and assure there are no interruptions.
This follows the matching PHY driver recommendation described in commit
bedd8d78ab ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On this SoM eqos is the primary ethernet interface, Ka-Ro fuses the
address for it in eth_mac1, eth_mac2 seems to be left unfused. In their
downstream u-boot they fetch it from eth_mac1 [1][2], by setting alias
of eqos to ethernet0, the driver then fetches the mac address based on
the alias number.
Set eqos to read from eth_mac1 instead of eth_mac2. Also set fec to
point at eth_mac2 as it may be fused later even though it is disabled
by default.
With this changed barebox is now capable of loading the correct address.
Link: 3805432784/drivers/net/dwc_eth_qos.c (L1167) [1]
Link: 3805432784/arch/arm/dts/imx8mp-karo.dtsi (L12) [2]
Fixes: bac63d7c5f ("arm64: dts: freescale: add Ka-Ro Electronics tx8p-ml81 COM")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The compatibles should include the SoM compatible, this board is based
on the Ka-Ro TX8P-ML81 SoM, so add it to allow using shared code in the
bootloader which uses upstream Linux devicetrees as a base.
Also add the hardware revision to the board compatible to handle
revision specific quirks in the bootloader/userspace.
This is a breaking change, but it is early enough that it can be
corrected without causing any issues.
Fixes: 03f07be54c ("arm64: dts: freescale: Add the GOcontroll Moduline Display baseboard")
Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix the SMARC_SDIO_WP gpio-line-name position. It should be on line 15
of som_gpio_expander_1, not line 17.
Fixes: 90bbe88e0e ("arm64: dts: freescale: add Toradex SMARC iMX95")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change the PHY interrupt trigger type from IRQ_TYPE_LEVEL_LOW to
IRQ_TYPE_EDGE_FALLING to match the PCA9745 GPIO expander hardware
capabilities and avoid emulated level detection.
Fixes: 90bbe88e0e ("arm64: dts: freescale: add Toradex SMARC iMX95")
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For SD card, according to the spec requirement, for sd card power reset
operation, it need sd card supply voltage to be lower than 0.5v and keep
over 1ms, otherwise, next time power back the sd card supply voltage to
3.3v, sd card can't support SD3.0 mode again.
To match such requirement on imx8qm-mek board, add 4.8ms delay between
sd power off and power on.
Fixes: 307fd14d4b ("arm64: dts: imx: add imx8qm mek support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
light sensor isl29023 share the interrupt with lsm303arg, but these
two devices use different interrupt type. According to the datasheet
of these two devides, both support low level trigger type, so correct
the interrupt type here to avoid the following error log:
irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000!
Fixes: 9918092cbb ("arm64: dts: imx8qm-mek: add i2c0 and children devices")
Fixes: 1d8a9f043a ("arm64: dts: imx8: use defines for interrupts")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
I3C2 is in WAKEUP domain. Its pclk should be IMX95_CLK_BUSWAKEUP.
Fixes: 969497ebef ("arm64: dts: imx95: Add i3c1 and i3c2")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Device Tree specification specifies[1] that
"""
Each node in the devicetree is named according to the following
convention:
node-name@unit-address
[...]
The unit-address must match the first address specified in the reg
property of the node.
"""
The first address in the reg property is fdaXa000 and not fdaX9000. This
is likely a copy-paste error as the IOMMU for core0 has two entries in
the reg property, the first one being fdab9000 and the second fdaba000.
Let's fix this oversight to match what the spec is expecting.
[1] https://github.com/devicetree-org/devicetree-specification/releases/download/v0.4/devicetree-specification-v0.4.pdf 2.2.1 Node Names
Fixes: a31dfc060a ("arm64: dts: rockchip: Add nodes for NPU and its MMU to rk3588-base")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://patch.msgid.link/20251215-npu-dt-node-address-v1-1-840093e8a2bf@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: 79f2a17024 ("arm64: dts: rockchip: add DTs for Sakura Pi RK3308B")
Cc: stable+noautosel@kernel.org # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Chiyuki Akatsuki <thesnowfield@sakurapi.org>
Link: https://patch.msgid.link/20251217091808.38253-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RP1 support loaded from overlay has been dropped from the driver and
the DTB intended to be loaded with the overlay no longer exists.
Drop unused include file and overlay.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/85167b815d41ed9ed690ad239a19de5cd2e8be1c.1766077285.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The node describing the RP1 endpoint currently uses a specific name
('rp1_nexus') that does not correctly reflect the PCI topology.
Update the DT with the correct topology and use generic node names.
Additionally, since the driver dropped overlay support in favor of a
fully described DT, rename '...-ovl-rp1.dts' to '...-base.dtsi' for
inclusion in the board DTB, as it is no longer compiled as a
standalone DTB.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/827b12ba48bb47bc77a0f5e5617aea961c8bc6b5.1766077285.git.andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
It's a requirement that DT overlays be applied at build time in order to
validate them as overlays are not validated on their own.
Add missing target for mt8395-radxa hd panel overlay.
Fixes: 4c8ff61199 ("arm64: dts: mediatek: mt8395-radxa-nio-12l: Add Radxa 8 HD panel")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: AngeloGioacchino Del Regno <angelogiaocchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251205215940.19287-1-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Build devicetree binaries for testing overlays and providing users
full dtb without using overlays for Bananapi R4 (pro) variants.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://patch.msgid.link/20251119175124.48947-3-linux@fw-web.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
With W=1, the following error comes up:
Warning (avoid_unnecessary_addr_size): /soc@0/usb@a600000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
This is because the child node being removed during flattening and moving
to latest bindings.
Fixes: 77e1f16b93 ("arm64: dts: qcom: sm8650: Flatten the USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251203144856.2711440-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With W=1, the following error comes up:
Warning (avoid_unnecessary_addr_size): /soc@0/usb@a600000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property
This is because the child node being removed during flattening and moving
to latest bindings.
Fixes: 33450878ad ("arm64: dts: qcom: sm8550: Flatten the USB nodes")
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251203144856.2711440-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
To make sure that power rail is voted for, wire it up to its consumers.
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-3-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
sofef00 is name of the DDIC, it doesn't contain name of the panel used.
The DDIC is also paired with other panels, so make clear which panel is
used.
New device-tree will work with old driver as expected, due to secondary
compatible.
Cosmetic: sort the properties in the node.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20251204-sofef00-rebuild-v4-1-7f6e030ae5b7@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The current UFS clocks does not align with their respective names,
causing the ref_clk to be set to an incorrect frequency as below,
which results in command timeouts.
ufshcd-qcom 1d84000.ufshc: invalid ref_clk setting = 300000000
This commit fixes the issue by properly reordering the UFS clocks to
match their names.
Fixes: ea172f61f4 ("arm64: dts: qcom: qcs615: Fix up UFS clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Pradeep P V K <pradeep.pragallapati@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251126131146.16146-1-pradeep.pragallapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Previously sometimes pressing the volume-down button would register as
a volume-up button. Match the thresholds as shown in the Pinephone Pro
schematic.
Tests:
~ $ evtest
// Mashed the volume down ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 1
Event: time xxx, type 1 (EV_KEY), code 114 (KEY_VOLUMEDOWN), value 0
// Mashed the volume up ~100 times with varying intensity
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1
Event: time xxx, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0
Fixes: d3150ed535 ("arm64: dts: rockchip: Add support for volume keys to rk3399-pinephone-pro")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Link: https://patch.msgid.link/20251124-ppp_light_accel_mag_vol-down-v5-4-f9a10a0a50eb@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions.
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now, with no reported
issues other than a merge conflict with your tree that should be trivial
to handle (take both sides).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaTTNDQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykVIACeN0AiTosAtp4CAGe4fAwM7EvbnkQAoNJE5NAx
Ef31/j1Tq2pCTWt6SVbs
=AY/e
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using
custom "Tensix" cores for computation offload managed by
Linux running on SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmky+5cACgkQmmx57+YA
GNlZQw//UFKE/eK7la9kvItF5u8HyyIc2lG5hj5zyv8iXtjyaJ7F8vKZ516QoNTX
Fzl9EmhYg1NoFVZTFrybAj1RcEdBdDQ6/leYyomvI9u3mFaVoSX0CSb+ZVrnULvT
bUX1HoEeet3aluF3KBNTeH/esexspUWvj7NFUJqglF7ne7CuccQmXC6Rnw1omhQp
SUHIhfeMda4mQUU08NM3q+/wXnoBpyt5wmVD2F8W867vT1NlpAqq1us/HCH2peFq
iJopMzWThVzGA7vOaPJGDgOd5Qyps0h5/FFlyC7cBGSYgpgxKT6CHTHHt4fxjaav
WhWNrIBATNny2nziFbO+EeW9NXpim8Fv2WSVBRFNiTCi2tIxIwIqWglDHMl/dKI0
Oqu0D35GxzPfHRXfCAPctBD87BUI31Jru/0dYwXPooaI5SxT2VAM3CDzmpFkUDcd
mYlQ6k+kSGq1AjTK0xFZPB4boGwuFD6tl+H5EnHCVVYXFovpBf71MZ6PTK8G6msl
Oxp/J1kA7ImgkSz5Jwj1kKn+MWE6KCC/u9hPYZ4wTs3R/VKSkaZKPcA60jHo+cA8
vK1yr6bmncFktOsXXhjV6i8HbXOQ+o1UCLyjmWE7BIyQzinIuC9lTPjjUGcLfa4u
8oZaRhyFc9XGv9AJZFAicgiS2vIR+9KzQdA1a+LvBAFk4WtyRKw=
=3eAN
-----END PGP SIGNATURE-----
Merge tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC families update from Arnd Bergmann:
"These three new families of SoC are split out into a separate branch
because they touch multiple parts of the source tree and are better
left separate for the initial merge.
- Black Sesame Technologies C1200 is an automotive SoC using
Cortex-A78 CPU cores
- Anlogic dr1v90 (not to be confused with Amlogic) is an FPGA
platform using a single nuclei ux900 RISC-V core
- Tenstorrent Blackhole is a Neural Processing Unit using custom
"Tensix" cores for computation offload managed by Linux running on
SiFive X280 RISC-V cores.
Support for all three is rather rudimentary at the moment and will get
improved as device drivers are merged through other tree"
* tag 'soc-newsoc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
MAINTAINERS: add Black Sesame Technologies (BST) ARM SoC support
arm64: defconfig: enable BST platform support
arm64: dts: bst: add support for Black Sesame Technologies C1200 CDCU1.0 board
arm64: Kconfig: add ARCH_BST for Black Sesame Technologies SoCs
dt-bindings: arm: add Black Sesame Technologies (bst) SoC
dt-bindings: vendor-prefixes: Add Black Sesame Technologies Co., Ltd.
MAINTAINERS: Setup support for Anlogic tree
riscv: defconfig: Enable Anlogic SoC
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: Add Anlogic SoC famly Kconfig support
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
riscv: defconfig: Enable Tenstorrent SoCs
riscv: Kconfig.socs: Add ARCH_TENSTORRENT for Tenstorrent SoCs
riscv: dts: Add Tenstorrent Blackhole SoC PCIe cards
dt-bindings: interrupt-controller: Add Tenstorrent Blackhole compatible
...
Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive SoCs,
based on 16 Cortex-A720 (Armv9.2) cores, which makes the the currently
highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs, this
one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip based
on Cortex-A53, and closely related to MSM8917 (Snapdragn 425), which we
already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree, with
the majority of the changes going into the Qualcomm, NXP, Renesas and
Rockchips platforms.
-----BEGIN PGP SIGNATURE-----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=1SN1
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
new driver:
- Arm Ethos-U65/U85 accel driver
core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement.
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA,
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel.
- ilitek-ili9881c : add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615 as
supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205
-----BEGIN PGP SIGNATURE-----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=gpnQ
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The original addition of cache information for the Amlogic S922X SoC
used the wrong next-level cache node for CPU cores 100 and 101,
incorrectly referencing `l2_cache_l`. These cores actually belong to
the big cluster and should reference `l2_cache_b`. Update the device
tree accordingly.
Fixes: e7f85e6c15 ("arm64: dts: amlogic: Add cache information to the Amlogic S922X SoC")
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251123-fixkhadas-v1-1-045348f0a4c2@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
