Code that passes a 32-bit constant into cmpxchg() produces a harmless
sparse warning because of the truncation in the branch that is not taken:
fs/erofs/zdata.c: note: in included file (through /home/arnd/arm-soc/arch/arm/include/asm/cmpxchg.h, /home/arnd/arm-soc/arch/arm/include/asm/atomic.h, /home/arnd/arm-soc/include/linux/atomic.h, ...):
include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe)
include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe)
include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe)
include/asm-generic/cmpxchg-local.h:30:42: warning: cast truncates bits from constant value (5f0edead becomes ad)
include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe)
include/asm-generic/cmpxchg-local.h:34:44: warning: cast truncates bits from constant value (5f0edead becomes dead)
This was reported as a regression to Matt's recent __generic_cmpxchg_local
patch, though this patch only added more warnings on top of the ones
that were already there.
Rewording the truncation to use an explicit bitmask instead of a cast
to a smaller type avoids the warning but otherwise leaves the code
unchanged.
I had another look at why the cast is even needed for atomic_cmpxchg(),
and as Matt describes the problem here is that atomic_t contains a
signed 'int', but cmpxchg() takes an 'unsigned long' argument, and
converting between the two leads to a 64-bit sign-extension of
negative 32-bit atomics.
I checked the other implementations of arch_cmpxchg() and did not find
any others that run into the same problem as __generic_cmpxchg_local(),
but it's easy to be on the safe side here and always convert the
signed int into an unsigned int when calling arch_cmpxchg(), as this
will work even when any of the arch_cmpxchg() implementations run
into the same problem.
Fixes: 6246541522 ("locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value")
Reviewed-by: Matt Evans <mev@rivosinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copy the forced type casts from the normal MMIO accessors to suppress
the sparse warnings that point out __raw_readl() returns a native endian
word (just like readl()).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit c1d55d5013 ("asm-generic/io.h: Fix sparse warnings on
big-endian architectures") missed fixing the 64-bit accessors.
Arnd explains in the attached link why the casts are necessary, even if
__raw_readq() and __raw_writeq() do not take endian-specific types.
Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There might be confusion about why pci_bus_for_each_resource() uses
Logical OR. Document the entire macro and explain how it works and why the
conditional needs to be like that.
Link: https://lore.kernel.org/r/20230330162434.35055-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Instead of open-coding it everywhere introduce a tiny helper that can be
used to iterate over each resource of a PCI device, and convert the most
obvious users into it.
While at it drop doubled empty line before pdev_sort_resources().
No functional changes intended.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230330162434.35055-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Introduce pci_resource_n() and replace open-coded implementations of it
in pci.h.
Link: https://lore.kernel.org/r/20230330162434.35055-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This commit moves the ->reschedule_jiffies, ->reschedule_count, and
->work fields from the srcu_struct structure to the srcu_usage structure
to reduce the size of the former in order to improve cache locality.
However, this means that the container_of() calls cannot get a pointer
to the srcu_struct because they are no longer in the srcu_struct.
This issue is addressed by adding a ->srcu_ssp field in the srcu_usage
structure that references the corresponding srcu_struct structure.
And given the presence of the sup pointer to the srcu_usage structure,
replace some ssp->srcu_usage-> instances with sup->.
[ paulmck Apply feedback from kernel test robot. ]
Link: https://lore.kernel.org/oe-kbuild-all/202303191400.iO5BOqka-lkp@intel.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_barrier_seq, ->srcu_barrier_mutex,
->srcu_barrier_completion, and ->srcu_barrier_cpu_cnt fields from the
srcu_struct structure to the srcu_usage structure to reduce the size of
the former in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->sda_is_static field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_size_jiffies, ->srcu_n_lock_retries,
and ->srcu_n_exp_nodelay fields from the srcu_struct structure to the
srcu_usage structure to reduce the size of the former in order to improve
cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_gp_seq, ->srcu_gp_seq_needed,
->srcu_gp_seq_needed_exp, ->srcu_gp_start, and ->srcu_last_gp_end fields
from the srcu_struct structure to the srcu_usage structure to reduce
the size of the former in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_gp_mutex field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->lock field from the srcu_struct structure to
the srcu_usage structure to reduce the size of the former in order to
improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_cb_mutex field from the srcu_struct structure
to the srcu_usage structure to reduce the size of the former in order
to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->srcu_size_state field from the srcu_struct
structure to the srcu_usage structure to reduce the size of the former
in order to improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit moves the ->level[] array from the srcu_struct structure to
the srcu_usage structure to reduce the size of the former in order to
improve cache locality.
Suggested-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current srcu_struct structure is on the order of 200 bytes in size
(depending on architecture and .config), which is much better than the
old-style 26K bytes, but still all too inconvenient when one is trying
to achieve good cache locality on a fastpath involving SRCU readers.
However, only a few fields in srcu_struct are used by SRCU readers.
The remaining fields could be offloaded to a new srcu_update
structure, thus shrinking the srcu_struct structure down to a few
tens of bytes. This commit begins this noble quest, a quest that is
complicated by open-coded initialization of the srcu_struct within the
srcu_notifier_head structure. This complication is addressed by updating
the srcu_notifier_head structure's open coding, given that there does
not appear to be a straightforward way of abstracting that initialization.
This commit moves only the ->node pointer to srcu_update. Later commits
will move additional fields.
[ paulmck: Fold in qiang1.zhang@intel.com's memory-leak fix. ]
Link: https://lore.kernel.org/all/20230320055751.4120251-1-qiang1.zhang@intel.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Further shrinking the srcu_struct structure is eased by requiring
that in-module srcu_struct structures rely more heavily on static
initialization. In particular, this preserves the property that
a module-load-time srcu_struct initialization can fail only due
to memory-allocation failure of the per-CPU srcu_data structures.
It might also slightly improve robustness by keeping the number of memory
allocations that must succeed down percpu_alloc() call.
This is in preparation for splitting an srcu_usage structure out
of the srcu_struct structure.
[ paulmck: Fold in qiang1.zhang@intel.com feedback. ]
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is a whitespace-only commit with no change in functionality.
Its purpose is to prepare for later commits that: (1) Cause statically
allocated srcu_struct structures to rely on compile-time initialization
and (2) Move fields from the srcu_struct structure to a new srcu_usage
structure.
Cc: Christoph Hellwig <hch@lst.de>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: "Zhang, Qiang1" <qiang1.zhang@intel.com>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
struct delayed_work rsrc_put_work was previously used to offload node
freeing because io_rsrc_node_ref_zero() was previously called by RCU in
the IRQ context. Now, as percpu refcounting is gone, we can do it
eagerly at the spot without pushing it to a worker.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/13fb1aac1e8d068ad8fd4a0c6d0d157ab61b90c0.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->rsrc_ref_lock spinlock to protect ->rsrc_ref_list in
io_rsrc_node_ref_zero(). Now we removed pcpu refcounting, which means
io_rsrc_node_ref_zero() is not executed from the irq context as an RCU
callback anymore, and we also put it under ->uring_lock.
io_rsrc_node_switch(), which queues up nodes into the list, is also
protected by ->uring_lock, so we can safely get rid of ->rsrc_ref_lock.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6b60af883c263551190b526a55ff2c9d5ae07141.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We cache refs of the current node (i.e. ctx->rsrc_node) in
ctx->rsrc_cached_refs. We'll be moving away from atomics, so move the
cached refs in struct io_rsrc_node for now. It's a prep patch and
shouldn't change anything in practise.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/9edc3669c1d71b06c2dca78b2b2b8bb9292738b9.1680576071.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The merged patch series to support zoned block devices in virtio-blk
is not the most up to date version. The merged patch can be found at
https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/
but the latest and reviewed version is
https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/
The reason is apparently that the correct mailing lists and
maintainers were not copied.
The differences between the two are mostly cleanups, but there is one
change that is very important in terms of compatibility with the
approved virtio-zbd specification.
Before it was approved, the OASIS virtio spec had a change in
VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the
current virtio-blk driver code. In the running code, the status is
the first byte of the in-header that is followed by some pad bytes
and the u64 that carries the sector at which the data has been written
to the zone back to the driver, aka the append sector.
This layout turned out to be problematic for implementing in QEMU and
the request status byte has been eventually made the last byte of the
in-header. The current code doesn't expect that and this causes the
append sector value always come as zero to the block layer. This needs
to be fixed ASAP.
Fixes: 95bfec41bd ("virtio-blk: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Message-Id: <20230330214953.1088216-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The following selftest patch requires both the bug fixes and the
improvements of the selftest framework.
* iommufd/for-rc:
iommufd: Do not corrupt the pfn list when doing batch carry
iommufd: Fix unpinning of pages when an access is present
iommufd: Check for uptr overflow
Linux 6.3-rc5
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZCFKJwAKCRCKwlD9ZEnx
cPIdAP90BP0unOGpD1l+YLOUaqe9GYvLbMif4MOXuN0C1ctJQQD/T5y69zkYgBGq
VOSESUhP1N+eZVVv5KA1iTOSkLcZRgQ=
=ciEf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=koZe
-----END PGP SIGNATURE-----
Merge tag 'renesas-drivers-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.4
- Drop support for the obsolete R-Car H3 ES1.* (R8A77950) SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-drivers-for-v6.4-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Use "#ifdef" for single-symbol definition checks
soc: renesas: pwc-rzv2m: drop of_match_ptr for ID table
soc: renesas: mark OF related data as maybe unused
soc: renesas: rmobile-sysc: Use of_fwnode_handle() helper
soc: renesas: Remove r8a77950 arch
soc: renesas: rcar-sysc: Remove R-Car H3 ES1.* handling
Link: https://lore.kernel.org/r/cover.1679907059.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This function returned zero unconditionally. Make it return no value and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.
This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some SPI NOR controllers that used this method were moved to
drivers/spi/. We don't accept new support for the existing SPI NOR
controllers drivers under drivers/mtd/spi-nor/controllers/ and we
encourage their owners to move the drivers under drivers/spi/.
Make spi_nor_restore() private as we're going to use it just in core.c.
Link: https://lore.kernel.org/r/20230331074606.3559258-8-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Now that the driver core allows for struct class to be in read-only
memory, move the tty_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/2023040250-landowner-unfitted-11f4@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The add_dev and remove_dev callbacks in struct class_interface currently
pass in a pointer back to the class_interface structure that is calling
them, but none of the callback implementations actually use this pointer
as it is pointless (the structure is known, the driver passed it in in
the first place if it is really needed again.)
So clean this up and just remove the pointer from the callbacks and fix
up all callback functions.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Wang Weiyang <wangweiyang2@huawei.com>
Cc: Yang Yingliang <yangyingliang@huawei.com>
Cc: Jakob Koschel <jakobkoschel@gmail.com>
Cc: Cai Xinchen <caixinchen1@huawei.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/2023040250-pushover-platter-509c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct class pointer in struct class_interface is never modified, so
mark it as const so that no one accidentally tries to modify it in the
future.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040249-handball-gruffly-5da7@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the class code is cleaned up to not modify the class pointer
registered with it, change class_register() to take a const * to allow
the structure to be placed into read-only memory.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040248-customary-release-4aec@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct class callback, class_release(), is only called in 2 places,
the pcmcia cardservices code, and in the class driver core code. Both
places it is safe to mark the structure as a const *, to allow us to
in the future mark all struct class usages as constant and move into
read-only memory.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/2023040248-outrage-obsolete-5a9a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmQof0cACgkQqDIjiipP
6E/tXQgArKKlM52mo3pg880JsiWOWGrS7pJN0x9MR0nqUm83sLTDf21fPoYmn+EJ
wrzClIX1iHCDVCWCVxao7OIT1mxez9L2NAHseXDSDQJcZ0fflTE8wZ8xeLr6q5GN
/ifHfCqiC98yejPcKIf2TqdGgqpCzyQ++sZoc3H6/jwysSkFlBc+YgKx+XasQR6k
5swQ3E81zx0ouB+t1GDieXB6YRsjZzR2KQbbExoHexPue1DTIuuumz8M1Fgz4a4b
gXRHbrGp3vmLORIAOZiVDyjzC7jwy7oN552g16yZLGDUdLaJ03gRRx7fvNzDUEMW
mBzxak4WnNWEatCh691X6W5MdPO/uQ==
=naJV
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control material for 6.4-rc1 from Daniel Lezcano:
"- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)"
* tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/ti: Use fixed update interval
thermal/drivers/stm: Don't set no_hwmon to false
thermal/drivers/db8500: Use driver dev instead of tz->device
thermal/core: Relocate the traces definition in thermal directory
thermal/drivers/hisi: Use devm_platform_ioremap_resource()
thermal/drivers/imx: Use the thermal framework for the trip point
thermal/drivers/imx: Remove get_trip_temp ops
thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling
thermal/drivers/mediatek: Add delay after thermal banks initialization
thermal/drivers/mediatek: Add support for MT8365 SoC
thermal/drivers/mediatek: Control buffer enablement tweaks
dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC
A __field() in the TRACE_EVENT() macro is used to set up the fields of the
trace event data. It is for single storage units (word, char, int,
pointer, etc) and not for complex structures or arrays. Unfortunately,
there's nothing preventing the build from accepting:
__field(int, arr[5]);
from building. It will turn into a array value. This use to work fine, as
the offset and size use to be determined by the macro using the field name,
but things have changed and the offset and size are now determined by the
type. So the above would only be size 4, and the next field will be
located 4 bytes from it (instead of 20).
The proper way to declare static arrays is to use the __array() macro.
Instead of __field(int, arr[5]) it should be __array(int, arr, 5).
Add some macro tricks to the building of a trace event from the
TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A
comment by the failure will explain why the build failed.
Link: https://lore.kernel.org/lkml/20230306122549.236561-1-douglas.raillard@arm.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230309221302.642e82d9@gandalf.local.home
Reported-by: Douglas RAILLARD <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
If the compiler decides not to inline this function then preemption
tracing will always show an IP inside the preemption disabling path and
never the function actually calling preempt_{enable,disable}.
Link: https://lore.kernel.org/linux-trace-kernel/20230327173647.1690849-1-john@metanate.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: f904f58263 ("sched/debug: Fix preempt_disable_ip recording for preempt_disable()")
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
It has nothing to do with the SQE at this point, it's a request
submission. While in there, get rid of the 'force_nonblock' argument
which is also dead, as we only pass in true.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For task works we're passing around a bool pointer for whether the
current ring is locked or not, let's wrap it in a structure, that
will make it more opaque preventing abuse and will also help us
to pass more info in the future if needed.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1ecec9483d58696e248d1bfd52cf62b04442df1d.1679931367.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for KASAN in the alloc_caches (apoll and netmsg_cache).
Thus, if something touches the unused caches, it will raise a KASAN
warning/exception.
It poisons the object when the object is put to the cache, and unpoisons
it when the object is gotten or freed.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Having cache entries linked using the hlist format brings no benefit, and
also requires an unnecessary extra pointer address per cache entry.
Use the internal io_wq_work_node single-linked list for the internal
alloc caches (async_msghdr and async_poll)
This is required to be able to use KASAN on cache entries, since we do
not need to touch unused (and poisoned) cache entries when adding more
entries to the list.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230223164353.2839177-2-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ring mapped provided buffer rings rely on the application allocating
the memory for the ring, and then the kernel will map it. This generally
works fine, but runs into issues on some architectures where we need
to be able to ensure that the kernel and application virtual address for
the ring play nicely together. This at least impacts architectures that
set SHM_COLOUR, but potentially also anyone setting SHMLBA.
To use this variant of ring provided buffers, the application need not
allocate any memory for the ring. Instead the kernel will do so, and
the allocation must subsequently call mmap(2) on the ring with the
offset set to:
IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
to get a virtual address for the buffer ring. Normally the application
would allocate a suitable piece of memory (and correctly aligned) and
simply pass that in via io_uring_buf_reg.ring_addr and the kernel would
map it.
Outside of the setup differences, the kernel allocate + user mapped
provided buffer ring works exactly the same.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing flags to be set for registration, rename
the padding and use it for that.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some filesystems support multiple threads writing to the same file with
O_DIRECT without requiring exclusive access to it. io_uring can use this
hint to avoid serializing dio writes to this inode, instead allowing them
to run in parallel.
XFS and ext4 both fall into this category, so set the flag for both of
them.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't populate drm_driver.gem_prime_import_sg_table so only
DMA-BUFs exported from our own device can be imported. We don't
populate drm_gem_object_funcs.get_sg_table so DMA-BUFs cannot be
imported into another device. Still, this is useful to user-space
to share buffers between processes and between API boundaries
(e.g. wlroots hard-requires PRIME import/export support).
v2: expand commit message
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302143502.500661-2-contact@emersion.fr
The current state of the art for sparse register maps is the
rbtree cache. This works well for most applications but isn't
always ideal for sparser register maps since the rbtree can get
deep, requiring a lot of walking. Fortunately the kernel has a
data structure intended to address this very problem, the maple
tree. Provide an initial implementation of a register cache
based on the maple tree to start taking advantage of it.
The entries stored in the maple tree are arrays of register
values, with the maple tree keys holding the register addresses.
We store data in host native format rather than device native
format as we do for rbtree, this will be a benefit for devices
where we don't marshal data within regmap and simplifies the code
but will result in additional CPU overhead when syncing the cache
on devices where we do marshal data in regmap.
This should work well for a lot of devices, though there's some
additional areas that could be looked at such as caching the
last accessed entry like we do for rbtree and trying to minimise
the maple tree level locking. We should also use bulk writes
rather than single register writes when resyncing the cache where
possible, even if we don't store in device native format.
Very small register maps may continue to to better with rbtree
longer term.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230325-regcache-maple-v3-2-23e271f93dc7@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the API that allows device specific drivers to tell user-space
about whether the wireless device is connected to its receiver dongle.
See "USB: core: Add wireless_status sysfs attribute" for a detailed
explanation of what this attribute should be used for.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20230302105555.51417-5-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
