commit 4cf478dc5d upstream.
Some variants in this series of UART controllers have GPIO pins that
are shared between GPIO and modem control lines.
The pin mux mode (GPIO or modem control lines) can be set for each
ports (channels) supported by the variant.
This adds a property to the device tree to set the GPIO pin mux to
modem control lines on selected ports if needed.
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230807214556.540627-4-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f641174a1 upstream.
The `nocrt` module parameter has no code associated with it and does
nothing. As `crt=-1` has same functionality as what nocrt should be
doing drop `nocrt` and associated documentation.
This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and
thus didn't function properly.
Fixes: 8c99fdce30 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f00295e890 upstream.
Alternative function 'gpio' is not listed in the constants for pin
configuration, so adding this constant to the list.
Cc: stable@vger.kernel.org
Fixes: 9a2aaee23c ("dt-bindings: pinctrl: describe sa8775p-tlmm")
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719110344.19983-1-quic_shazhuss@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9bfab6d23a ]
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0
net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Reported-by: Paolo Valerio <pvalerio@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66419036f6 ]
An Interrupt Remapping Table (IRT) stores interrupt remapping configuration
for each device. In a normal operation, the AMD IOMMU caches the table
to optimize subsequent data accesses. This requires the IOMMU driver to
invalidate IRT whenever it updates the table. The invalidation process
includes issuing an INVALIDATE_INTERRUPT_TABLE command following by
a COMPLETION_WAIT command.
However, there are cases in which the IRT is updated at a high rate.
For example, for IOMMU AVIC, the IRTE[IsRun] bit is updated on every
vcpu scheduling (i.e. amd_iommu_update_ga()). On system with large
amount of vcpus and VFIO PCI pass-through devices, the invalidation
process could potentially become a performance bottleneck.
Introducing a new kernel boot option:
amd_iommu=irtcachedis
which disables IRTE caching by setting the IRTCachedis bit in each IOMMU
Control register, and bypass the IRT invalidation process.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Co-developed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359ed24a0d ]
We observed that on Chromebook device Steelix, if Goodix GT7375P
touchscreen is powered in suspend (because, for example, it connects to
an always-on regulator) and with the reset GPIO asserted, it will
introduce about 14mW power leakage.
To address that, we add this property to skip reset during suspend.
If it's set, the driver will stop asserting the reset GPIO during
power-down. Refer to the comments in the driver for details.
Signed-off-by: Fei Shao <fshao@chromium.org>
Suggested-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0bfbfc526c upstream
Both MMU-600 and MMU-700 have similar errata around TLB invalidation
while both stages of translation are active, which will need some
consideration once nesting support is implemented. For now, though,
it's very easy to make our implicit lack of nesting support explicit
for those cases, so they're less likely to be missed in future.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/696da78d32bb4491f898f11b0bb4d850a8aa7c6a.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 309a15cb16 upstream
To work around MMU-700 erratum 2812531 we need to ensure that certain
sequences of commands cannot be issued without an intervening sync. In
practice this falls out of our current command-batching machinery
anyway - each batch only contains a single type of invalidation command,
and ends with a sync. The only exception is when a batch is sufficiently
large to need issuing across multiple command queue slots, wherein the
earlier slots will not contain a sync and thus may in theory interleave
with another batch being issued in parallel to create an affected
sequence across the slot boundary.
Since MMU-700 supports range invalidate commands and thus we will prefer
to use them (which also happens to avoid conditions for other errata),
I'm not entirely sure it's even possible for a single high-level
invalidate call to generate a batch of more than 63 commands, but for
the sake of robustness and documentation, wire up an option to enforce
that a sync is always inserted for every slot issued.
The other aspect is that the relative order of DVM commands cannot be
controlled, so DVM cannot be used. Again that is already the status quo,
but since we have at least defined ARM_SMMU_FEAT_BTM, we can explicitly
disable it for documentation purposes even if it's not wired up anywhere
yet.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/330221cdfd0003cd51b6c04e7ff3566741ad8374.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f322e8af35 upstream
MMU-600 versions prior to r1p0 fail to correctly generate a WFE wakeup
event when the command queue transitions fom full to non-full. We can
easily work around this by simply hiding the SEV capability such that we
fall back to polling for space in the queue - since MMU-600 implements
MSIs we wouldn't expect to need SEV for sync completion either, so this
should have little to no impact.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/08adbe3d01024d8382a478325f73b56851f76e49.1683731256.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit: fb3bd914b3
Add a mitigation for the speculative return address stack overflow
vulnerability found on AMD processors.
The mitigation works by ensuring all RET instructions speculate to
a controlled location, similar to how speculation is controlled in the
retpoline sequence. To accomplish this, the __x86_return_thunk forces
the CPU to mispredict every function return using a 'safe return'
sequence.
To ensure the safety of this mitigation, the kernel must ensure that the
safe return sequence is itself free from attacker interference. In Zen3
and Zen4, this is accomplished by creating a BTB alias between the
untraining function srso_untrain_ret_alias() and the safe return
function srso_safe_ret_alias() which results in evicting a potentially
poisoned BTB entry and using that safe one for all function returns.
In older Zen1 and Zen2, this is accomplished using a reinterpretation
technique similar to Retbleed one: srso_untrain_ret() and
srso_safe_ret().
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 553a5c03e9 upstream
The Gather Data Sampling (GDS) vulnerability allows malicious software
to infer stale data previously stored in vector registers. This may
include sensitive data such as cryptographic keys. GDS is mitigated in
microcode, and systems with up-to-date microcode are protected by
default. However, any affected system that is running with older
microcode will still be vulnerable to GDS attacks.
Since the gather instructions used by the attacker are part of the
AVX2 and AVX512 extensions, disabling these extensions prevents gather
instructions from being executed, thereby mitigating the system from
GDS. Disabling AVX2 is sufficient, but we don't have the granularity
to do this. The XCR0[2] disables AVX, with no option to just disable
AVX2.
Add a kernel parameter gather_data_sampling=force that will enable the
microcode mitigation if available, otherwise it will disable AVX on
affected systems.
This option will be ignored if cmdline mitigations=off.
This is a *big* hammer. It is known to break buggy userspace that
uses incomplete, buggy AVX enumeration. Unfortunately, such userspace
does exist in the wild:
https://www.mail-archive.com/bug-coreutils@gnu.org/msg33046.html
[ dhansen: add some more ominous warnings about disabling AVX ]
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8974eb5882 upstream
Gather Data Sampling (GDS) is a hardware vulnerability which allows
unprivileged speculative access to data which was previously stored in
vector registers.
Intel processors that support AVX2 and AVX512 have gather instructions
that fetch non-contiguous data elements from memory. On vulnerable
hardware, when a gather instruction is transiently executed and
encounters a fault, stale data from architectural or internal vector
registers may get transiently stored to the destination vector
register allowing an attacker to infer the stale data using typical
side channel techniques like cache timing attacks.
This mitigation is different from many earlier ones for two reasons.
First, it is enabled by default and a bit must be set to *DISABLE* it.
This is the opposite of normal mitigation polarity. This means GDS can
be mitigated simply by updating microcode and leaving the new control
bit alone.
Second, GDS has a "lock" bit. This lock bit is there because the
mitigation affects the hardware security features KeyLocker and SGX.
It needs to be enabled and *STAY* enabled for these features to be
mitigated against GDS.
The mitigation is enabled in the microcode by default. Disable it by
setting gather_data_sampling=off or by disabling all mitigations with
mitigations=off. The mitigation status can be checked by reading:
/sys/devices/system/cpu/vulnerabilities/gather_data_sampling
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c04e989484 upstream.
When a grant entry is still in use by the remote domain, Linux must put
it on a deferred list. Normally, this list is very short, because
the PV network and block protocols expect the backend to unmap the grant
first. However, Qubes OS's GUI protocol is subject to the constraints
of the X Window System, and as such winds up with the frontend unmapping
the window first. As a result, the list can grow very large, resulting
in a massive memory leak and eventual VM freeze.
To partially solve this problem, make the number of entries that the VM
will attempt to free at each iteration tunable. The default is still
10, but it can be overridden via a module parameter.
This is Cc: stable because (when combined with appropriate userspace
changes) it fixes a severe performance and stability problem for Qubes
OS users.
Cc: stable@vger.kernel.org
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd470a8bee upstream.
Unlike Intel's Enhanced IBRS feature, AMD's Automatic IBRS does not
provide protection to processes running at CPL3/user mode, see section
"Extended Feature Enable Register (EFER)" in the APM v2 at
https://bugzilla.kernel.org/attachment.cgi?id=304652
Explicitly enable STIBP to protect against cross-thread CPL3
branch target injections on systems with Automatic IBRS enabled.
Also update the relevant documentation.
Fixes: e7862eda30 ("x86/cpu: Support AMD Automatic IBRS")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230720194727.67022-1-kim.phillips@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c1897ae4b upstream.
The kernel security team does NOT assign CVEs, so document that properly
and provide the "if you want one, ask MITRE for it" response that we
give on a weekly basis in the document, so we don't have to constantly
say it to everyone who asks.
Link: https://lore.kernel.org/r/2023063022-retouch-kerosene-7e4a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fee0915e6 upstream.
Because the linux-distros group forces reporters to release information
about reported bugs, and they impose arbitrary deadlines in having those
bugs fixed despite not actually being kernel developers, the kernel
security team recommends not interacting with them at all as this just
causes confusion and the early-release of reported security problems.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2023063020-throat-pantyhose-f110@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 253e5df8b8 ]
The noswap mount option is surely not one of the three options for sizing:
move its description down.
The huge= mount option does not accept numeric values: those are just in
an internal enum. Delete those numbers, and follow the manpage text more
closely (but there's not yet any fadvise() or fcntl() which applies here).
/sys/kernel/mm/transparent_hugepage/shmem_enabled is hard to describe, and
barely relevant to mounting a tmpfs: just refer to transhuge.rst (while
still using the words deny and force, to help as informal reminders).
[rdunlap@infradead.org: fixup Docs table for huge mount options]
Link: https://lkml.kernel.org/r/20230725052333.26857-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/986cb0bf-9780-354-9bb-4bf57aadbab@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: d0f5a85442 ("shmem: update documentation")
Fixes: 2c6efe9cf2 ("shmem: add support to ignore swap")
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 950e9a295b upstream.
The value of the V4L2_SUBDEV_ROUTE_FL_ACTIVE is 1, not 0. Use hexadecimal
numbers as is done elsewhere in the documentation.
Cc: stable@vger.kernel.org # for >= v6.3
Fixes: ea73eda508 ("media: Documentation: Add GS_ROUTING documentation")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6df696cd9b upstream.
AmpereOne has an erratum in its implementation of FEAT_HAFDBS that
required disabling the feature on the design. This was done by reporting
the feature as not implemented in the ID register, although the
corresponding control bits were not actually RES0. This does not align
well with the requirements of the architecture, which mandates these
bits be RES0 if HAFDBS isn't implemented.
The kernel's use of stage-1 is unaffected, as the HA and HD bits are
only set if HAFDBS is detected in the ID register. KVM, on the other
hand, relies on the RES0 behavior at stage-2 to use the same value for
VTCR_EL2 on any cpu in the system. Mitigate the non-RES0 behavior by
leaving VTCR_EL2.HA clear on affected systems.
Cc: stable@vger.kernel.org
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Darren Hart <darren@os.amperecomputing.com>
Acked-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230609220104.1836988-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28eceeda13 upstream.
When a directory is moved to a different directory, some filesystems
(udf, ext4, ocfs2, f2fs, and likely gfs2, reiserfs, and others) need to
update their pointer to the parent and this must not race with other
operations on the directory. Lock the directories when they are moved.
Although not all filesystems need this locking, we perform it in
vfs_rename() because getting the lock ordering right is really difficult
and we don't want to expose these locking details to filesystems.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230601105830.13168-5-jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e910c8e3aa upstream.
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning
for the autofs_dev_ioctl structure:
In function 'check_name',
inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9,
inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8:
fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
33 | if (!strchr(name, '/'))
| ^~~~~~~~~~~~~~~~~
In file included from include/linux/auto_dev-ioctl.h:10,
from fs/autofs/autofs_i.h:10,
from fs/autofs/dev-ioctl.c:14:
include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl':
include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0
112 | char path[0];
| ^~~~
This is easily fixed by changing the gnu 0-length array into a c99
flexible array. Since this is a uapi structure, we have to be careful
about possible regressions but this one should be fine as they are
equivalent here. While it would break building with ancient gcc versions
that predate c99, it helps building with --std=c99 and -Wpedantic builds
in user space, as well as non-gnu compilers. This means we probably
also want it fixed in stable kernels.
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f7306acec9 ]
Initial creation of an AF_XDP socket requires CAP_NET_RAW capability. A
privileged process might create the socket and pass it to a non-privileged
process for later use. However, that process will be able to bind the socket
to any network interface. Even though it will not be able to receive any
traffic without modification of the BPF map, the situation is not ideal.
Sockets already have a mechanism that can be used to restrict what interface
they can be attached to. That is SO_BINDTODEVICE.
To change the SO_BINDTODEVICE binding the process will need CAP_NET_RAW.
Make xsk_bind() honor the SO_BINDTODEVICE in order to allow safer workflow
when non-privileged process is using AF_XDP.
The intended workflow is following:
1. First process creates a bare socket with socket(AF_XDP, ...).
2. First process loads the XSK program to the interface.
3. First process adds the socket fd to a BPF map.
4. First process ties socket fd to a particular interface using
SO_BINDTODEVICE.
5. First process sends socket fd to a second process.
6. Second process allocates UMEM.
7. Second process binds socket to the interface with bind(...).
8. Second process sends/receives the traffic.
All the steps above are possible today if the first process is privileged
and the second one has sufficient RLIMIT_MEMLOCK and no capabilities.
However, the second process will be able to bind the socket to any interface
it wants on step 7 and send traffic from it. With the proposed change, the
second process will be able to bind the socket only to a specific interface
chosen by the first process at step 4.
Fixes: 965a990984 ("xsk: add support for bind for Rx")
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/bpf/20230703175329.3259672-1-i.maximets@ovn.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b290df0681 ]
Function ll_rw_block was removed in commit 79f5978420 ("fs/buffer:
remove ll_rw_block() helper"). There is no unified function to sumbit
read or write buffer in block layer for now. Consider similar sematics,
we can choose submit_bh() to replace ll_rw_block() as predefined crash
point. In submit_bh(), it also takes read or write flag as the first
argument and invoke submit_bio() to submit I/O request to block layer.
Fixes: 79f5978420 ("fs/buffer: remove ll_rw_block() helper")
Signed-off-by: Yue Zhao <findns94@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230503162944.3969-1-findns94@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f16135918b ]
The eud sysfs enablement path is currently mentioned in the
Documentation as:
/sys/bus/platform/drivers/eud/.../enable
Instead it should be:
/sys/bus/platform/drivers/qcom_eud/.../enable
Fix the same.
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230517211756.2483552-2-bhupesh.sharma@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d41dab4c03 ]
As pointed out by Shazad [1], PMICs using a separate HLOS+PBS scheme
(so PMK8350 and newer) are expected to pass reboot mode data through SDAM,
as the reboot mode registers are absent in the HLOS reg space.
Limit the reboot-mode.yaml inclusion to PMICs without a separate PBS
region.
[1] https://lore.kernel.org/linux-arm-msm/12f13183-c381-25f7-459e-62e0c2b19498@quicinc.com/
Fixes: 03fccdc76d ("dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3b266fa15 ]
Currently the compatible list available in 'qce' dt-bindings does not
support SM8150 and IPQ4019 SoCs directly which may lead to potential
'dtbs_check' error(s).
Fix the same.
Fixes: 00f3bc2db3 ("dt-bindings: qcom-qce: Add new SoC compatible strings for Qualcomm QCE IP")
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e4fe75e97 ]
The original clock names are different from the list in driver code.
Correct the mismatched binding names in the patch.
Because no mt8188 upstream dts exists, it doesn't affect the existing
dts file.
Fixes: 692d25b67e ("ASoC: dt-bindings: mediatek,mt8188-afe: add audio afe document")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org
Link: https://lore.kernel.org/r/20230510035526.18137-9-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b230235b38 upstream.
Kernel build now uses the gtags "-C (--directory)" option, available
since GNU GLOBAL v6.6.5. Update the documentation accordingly.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: https://lists.gnu.org/archive/html/info-global/2020-09/msg00000.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The final bug fixes for Qualcomm and Rockchips came in, all of them
for devicetree files:
- Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
marked so correctly to fix a regression after a change in kernel behavior.
- Rockchips has a few minor changes for correctness of regulator and cache
properties, as well as fixes for incorrect behavior of the RK3568 PCI
controller and reset pins on two boards.
-----BEGIN PGP SIGNATURE-----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=lfU1
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The final bug fixes for Qualcomm and Rockchips came in, all of them
for devicetree files:
- Devices on Qualcomm SC7180/SC7280 that are cache coherent are now
marked so correctly to fix a regression after a change in kernel
behavior
- Rockchips has a few minor changes for correctness of regulator and
cache properties, as well as fixes for incorrect behavior of the
RK3568 PCI controller and reset pins on two boards"
* tag 'arm-fixes-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
arm64: dts: rockchip: Fix rk356x PCIe register and range mappings
arm64: dts: rockchip: fix button reset pin for nanopi r5c
arm64: dts: rockchip: fix nEXTRST on SOQuartz
arm64: dts: rockchip: add missing cache properties
arm64: dts: rockchip: fix USB regulator on ROCK64
Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.
-----BEGIN PGP SIGNATURE-----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=ZdjH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=f/SB
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
One last Qualcomm ARM64 DeviceTree fix for v6.4
Changes related to cache management for DMA memory caused WiFi to stop
work on SC7180 and SC7280 based products, using TF-A. These changes
marks the relevant device dma-coherent to correct the behavior.
* tag 'qcom-arm64-fixes-for-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sc7280: Mark SCM as dma-coherent for chrome devices
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for trogdor
arm64: dts: qcom: sc7180: Mark SCM as dma-coherent for IDP
dt-bindings: firmware: qcom,scm: Document that SCM can be dma-coherent
Link: https://lore.kernel.org/r/20230622203248.106422-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"regstep" may be deprecated, but it still needs a type.
Fixes: 8ad69f4905 ("dt-bindings: i2c: convert ocores binding to yaml")
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Trogdor devices use firmware backed by TF-A instead of Qualcomm's
normal TZ. On TF-A we end up mapping memory as cacheable. Specifically,
you can see in Trogdor's TF-A code [1] in qti_sip_mem_assign() that we
call qti_mmap_add_dynamic_region() with MT_RO_DATA. This translates
down to MT_MEMORY instead of MT_NON_CACHEABLE or MT_DEVICE.
Let's allow devices like trogdor to be described properly by allowing
"dma-coherent" in the SCM node.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616081440.v2.1.Ie79b5f0ed45739695c9970df121e11d724909157@changeid
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries
and the latter is for anything in the Linux kernel tree.
The wrong mailing list was used because linux-trace-kernel did not
exist when rtla and rv were created.
- User events:
. Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events are made, but there were some cases
that a match could be incorrectly made.
. Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins
to clean them up.
. Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still
debates about how to expose this to user space. The infrastructure
is added, but the API is not.
. Update the selftests
Update the user event selftests to reflect the above changes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZJGrABQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgRDAQDvF8ktlcn+gqyUxt2OcTlbBh0jqS0b
FKXYdq6FTgfWYQD/ctunFbPdzn4D6Kc/lG8p4QxpMmtA19BUOPwEt3CkAwM=
=CDzr
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries and the
latter is for anything in the Linux kernel tree. The wrong mailing
list was used because linux-trace-kernel did not exist when rtla and
rv were created.
- User events:
- Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events is made, but there were some cases that
a match could be incorrectly made.
- Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins to
clean them up.
- Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still debates
about how to expose this to user space. The infrastructure is
added, but the API is not.
- Update the selftests
Update the user event selftests to reflect the above changes"
* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/user_events: Document auto-cleanup and remove dyn_event refs
selftests/user_events: Adapt dyn_test to non-persist events
selftests/user_events: Ensure auto cleanup works as expected
tracing/user_events: Add auto cleanup and future persist flag
tracing/user_events: Track refcount consistently via put/get
tracing/user_events: Store register flags on events
tracing/user_events: Remove user_ns walk for groups
selftests/user_events: Add perf self-test for empty arguments events
selftests/user_events: Clear the events after perf self-test
selftests/user_events: Add ftrace self-test for empty arguments events
tracing/user_events: Fix the incorrect trace record for empty arguments events
tracing: Modify print_fields() for fields output order
tracing/user_events: Handle matching arguments that is null from dyn_events
tracing/user_events: Prevent same name but different args event
tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list
* A documentation patch describing how we use patchwork.
-----BEGIN PGP SIGNATURE-----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=130G
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fix from Palmer Dabbelt:
- A documentation patch describing how we use patchwork
* tag 'riscv-for-linus-6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Documentation: RISC-V: patch-acceptance: mention patchwork's role
Now user_events auto-cleanup upon the last reference by default. This
makes it not possible to use the dynamics event file via tracefs.
Document that auto-cleanup is enabled by default and remove the refernce
to /sys/kernel/tracing/dynamic_events file to make this clear.
Link: https://lkml.kernel.org/r/20230614163336.5797-7-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Palmer suggested at some point, not sure if it was in one of the
weekly linux-riscv syncs, or a conversation at FOSDEM, that we
should document the role of the automation running on our patchwork
instance plays in patch acceptance.
Add a short note to the patch-acceptance document to that end.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20230606-rehab-monsoon-12c17bbe08e3@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The "qcom,paired" schema is all wrong. First, it's a list rather than an
object(dictionary). Second, it is missing a required type. The meta-schema
normally catches this, but schemas under "$defs" was not getting checked.
A fix for that is pending.
Fixes: f9a06b8109 ("dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150606.1528107-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Most of the changes this time are for the Qualcomm Snapdragon platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon, rpmh-rsc,
ramp_controller and rmtfs driver as well as the AMD tee firmware
driver and a missing initialization in the Arm ff-a firmware driver.
The Qualcomm RPMh and EDAC drivers need some rework to work correctly
on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable
properties on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire.
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV.
-----BEGIN PGP SIGNATURE-----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=auoN
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Each device schema must end with unevaluatedProperties: false, if it
references other common schema. Otherwise it would allow any properties
to be listed.
Fixes: b8b0446f1f ("dt-bindings: i3c: Describe Silvaco master binding")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230609141107.66128-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
* Fix css_set reference leaks on fork failures.
* Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset.
* Doc update.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZIJ5bQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGc/CAQCmE2cKGBWN45xbzIA5S7+zq8QCv85BYlnAgqpR
jgF8GQD/fFXdmKL0wTzjTf1YOvEi9UxJqhDvHSRtV53fzPedbg4=
=s+u8
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
