commit 56062d60f1 upstream.
Presently ia32 registers stored in ptregs are unconditionally cast to
unsigned int by the ia32 stub. They are then cast to long when passed to
__se_sys*, but will not be sign extended.
This takes the sign of the syscall argument into account in the ia32
stub. It still casts to unsigned int to avoid implementation specific
behavior. However then casts to int or unsigned int as necessary. So that
the following cast to long sign extends the value.
This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently
the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the
maximum number of events.
It doesn't appear other systemcalls with signed arguments are effected
because they all have compat variants defined and wired up.
Fixes: ebeb8c82ff ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com
Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59be5c3585 upstream.
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Fixes: 9b26616c8d ("MIPS: Respect the ISA level in FCSR handling")
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4bf2a626dc ]
Lantiq uses a common kernel config for devices with 24Kc and 34Kc cores.
The changes made previously to add support for interrupts on all cores
work on 24Kc platforms with SMP disabled and 34Kc platforms with SMP
enabled. This patch fixes boot issues on Danube (single core 24Kc) with
SMP enabled.
Fixes: 730320fd77 ("MIPS: lantiq: enable all hardware interrupts on second VPE")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eab4f56d3e ]
After more investigation, I've found that it's not the panel driver
config that needs to be modified to invert the data polarity, but
the FIMD config.
Add the missing invert-vclk option that is required to get the display
to work correctly.
Fixes: ee37a457af ("ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://lore.kernel.org/r/20240105-tab3-display-fixes-v2-1-904d1207bf6f@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit cef9ecc8e9 upstream.
Specs don't say anything about UIP being cleared within 10ms. They
only say that UIP won't occur for another 244uS. If a long NMI occurs
while UIP is still updating it might not be possible to get valid
data in 10ms.
This has been observed in the wild that around s2idle some calls can
take up to 480ms before UIP is clear.
Adjust callers from outside an interrupt context to wait for up to a
1s instead of 10ms.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217626
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20231128053653.101798-5-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 120931db07 upstream.
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 832dd634bd upstream.
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled".
Fixes: 471470bc70 ("arm64: errata: Add Cortex-A520 speculative unprivileged load workaround")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240116110221.420467-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7eb87557 upstream.
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f827bcdafa upstream.
Implement the workaround for ARM Cortex-A510 erratum 3117295. On an
affected Cortex-A510 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The erratum and workaround are the same as ARM Cortex-A520 erratum
2966298, so reuse the existing workaround.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-2-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 546b7cde9b upstream.
In preparation to apply ARM64_WORKAROUND_2966298 for multiple errata,
rename the kconfig and capability. No functional change.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240110-arm-errata-a510-v1-1-d02bc51aeeee@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f449e245e upstream.
In COMPAT mode, the STACK_TOP is DEFAULT_MAP_WINDOW (0x80000000), but
the TASK_SIZE is 0x7fff000. When the user stack is upon 0x7fff000, it
will cause a user segment fault. Sometimes, it would cause boot
failure when the whole rootfs is rv32.
Freeing unused kernel image (initmem) memory: 2236K
Run /sbin/init as init process
Starting init: /sbin/init exists but couldn't execute it (error -14)
Run /etc/init as init process
...
Increase the TASK_SIZE to cover STACK_TOP.
Cc: stable@vger.kernel.org
Fixes: add2cc6b65 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-2-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97b7ac69be upstream.
When the task is in COMPAT mode, the arch_get_mmap_end should be 2GB,
not TASK_SIZE_64. The TASK_SIZE has contained is_compat_mode()
detection, so change the definition of STACK_TOP_MAX to TASK_SIZE
directly.
Cc: stable@vger.kernel.org
Fixes: add2cc6b65 ("RISC-V: mm: Restrict address space for sv39,sv48,sv57")
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20231222115703.2404036-3-guoren@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 710dd03464 upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: fea4b41022 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 047b2edc35 upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 07c8ded6e3 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c42d12ea10 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: de3b3de309 ("arm64: dts: qcom: sdm670: fix USB wakeup interrupt types")
Fixes: 07c8ded6e3 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231214074319.11023-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0afa885d42 upstream.
The USB SS PHY interrupt needs to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231214074319.11023-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 687d402bb3 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 0dc0f6da3d ("arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types")
Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc4e1da491 upstream.
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 134de5e831 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 54524b6987 ("arm64: dts: qcom: sm8150: fix USB wakeup interrupt types")
Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jack Pham <quic_jackp@quicinc.com>
Cc: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 971f5d8b06 upstream.
The USB SS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states.
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204f9ed4ba upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: 84ad9ac8d9 ("arm64: dts: qcom: sdm845: fix USB wakeup interrupt types")
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231213173403.29544-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de95f13939 upstream.
The USB DP/DM HS PHY interrupts need to be provided by the PDC interrupt
controller in order to be able to wake the system up from low-power
states and to be able to detect disconnect events, which requires
triggering on falling edges.
A recent commit updated the trigger type but failed to change the
interrupt provider as required. This leads to the current Linux driver
failing to probe instead of printing an error during suspend and USB
wakeup not working as intended.
Fixes: d0ec3c4c11 ("ARM: dts: qcom: sdx55: fix USB wakeup interrupt types")
Fixes: fea4b41022 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231213173131.29436-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc1ec484f2 upstream.
Add the missing vio-supply to all usages of the AW2013 LED controller
to ensure that the regulator needed for pull-up of the interrupt and
I2C lines is really turned on. While this seems to have worked fine so
far some of these regulators are not guaranteed to be always-on. For
example, pm8916_l6 is typically turned off together with the display
if there aren't any other devices (e.g. sensors) keeping it always-on.
Cc: stable@vger.kernel.org # 6.6
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20231204-qcom-aw2013-vio-v1-1-5d264bb5c0b2@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0dc0f6da3d upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 54524b6987 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3b3de309 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 07c8ded6e3 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84ad9ac8d9 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b956999bf upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bbda9421f upstream.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8939-common.dtsi#L866-872
Cc: stable@vger.kernel.org # 6.5
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-2-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c45b6ddbc upstream.
The blsp_dma controller is shared between the different subsystems,
which is why it is already initialized by the firmware. We should not
reinitialize it from Linux to avoid potential other users of the DMA
engine to misbehave.
In mainline this can be described using the "qcom,controlled-remotely"
property. In the downstream/vendor kernel from Qualcomm there is an
opposite "qcom,managed-locally" property. This property is *not* set
for the qcom,sps-dma@7884000 [1] so adding "qcom,controlled-remotely"
upstream matches the behavior of the downstream/vendor kernel.
Adding this seems to fix some weird issues with UART where both
input/output becomes garbled with certain obscure firmware versions on
some devices.
[1]: https://git.codelinaro.org/clo/la/kernel/msm-3.10/-/blob/LA.BR.1.2.9.1-02310-8x16.0/arch/arm/boot/dts/qcom/msm8916.dtsi#L1466-1472
Cc: stable@vger.kernel.org # 6.5
Fixes: a0e5fb1031 ("arm64: dts: qcom: Add msm8916 BLSP device nodes")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231204-msm8916-blsp-dma-remote-v1-1-3e49c8838c8d@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44de8996ed upstream.
The QoS blocks saved/restored when toggling the PD_USB power domain are
clocked by ACLK_USB. Attempting to access these memory regions without
that clock running will result in an indefinite CPU stall.
The PD_USB node wasn't specifying this clock dependency, resulting in
hangs when trying to toggle the power domain (either on or off), unless
we get "lucky" and have ACLK_USB running for another reason at the time.
This "luck" can result from the bootloader leaving USB powered/clocked,
and if no built-in driver wants USB, Linux will disable the unused
PD+CLK on boot when {pd,clk}_ignore_unused aren't given. This can also
be unlucky because the two cleanup tasks run in parallel and race: if
the CLK is disabled first, the PD deactivation stalls the boot. In any
case, the PD cannot then be reenabled (if e.g. the driver loads later)
once the clock has been stopped.
Fix this by specifying a dependency on ACLK_USB, instead of only
ACLK_USB_ROOT. The child-parent relationship means the former implies
the latter anyway.
Fixes: c9211fa260 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Link: https://lore.kernel.org/r/20231216021019.1543811-1-CFSworks@gmail.com
[changed to only include the missing clock, not dropping the root-clocks]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84228d5e29 upstream.
The kernel hangs for a good 12 seconds without any info being printed to
dmesg, very early in the boot process, if this regulator is not enabled.
Force-enable it to work around this issue, until we know more about the
underlying problem.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: stable@vger.kernel.org # v5.8+
Link: https://lore.kernel.org/r/20231206221556.15348-2-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0ec3c4c11 upstream.
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.
Fixes: fea4b41022 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org # 5.12
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 663affdb12 upstream.
The sc8280xp Display Port PHYs can be used in either DP or eDP mode and
this is configured using the devicetree compatible string which defaults
to DP mode in the SoC dtsi.
Override the default compatible string for the CRD eDP PHY node so that
the eDP settings are used.
Fixes: 4a883a8d80 ("arm64: dts: qcom: sc8280xp-crd: Enable EDP")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231016080658.6667-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b76bbf835d upstream.
Newer variants of Ixora boards require a power-up delay when powering up
the CAN transceiver of up to 1ms.
Cc: stable@vger.kernel.org
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 735ae74f73 upstream.
When running with narrow firmware (64-bit kernel using a 32-bit
firmware), extend PDC addresses into the 0xfffffff0.00000000
region instead of the 0xf0f0f0f0.00000000 region.
This fixes the power button on the C3700 machine in qemu (64-bit CPU
with 32-bit firmware), and my assumption is that the previous code was
really never used (because most 64-bit machines have a 64-bit firmware),
or it just worked on very old machines because they may only decode
40-bit of virtual addresses.
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e1a9ae4573 upstream.
max_mapnr variable is utilized in the pfn_valid() method in order to
determine the upper PFN space boundary. Having it uninitialized
effectively makes any PFN passed to that method invalid. That in its turn
causes the kernel mm-subsystem occasion malfunctions even after the
max_mapnr variable is actually properly updated. For instance,
pfn_valid() is called in the init_unavailable_range() method in the
framework of the calls-chain on MIPS:
setup_arch()
+-> paging_init()
+-> free_area_init()
+-> memmap_init()
+-> memmap_init_zone_range()
+-> init_unavailable_range()
Since pfn_valid() always returns "false" value before max_mapnr is
initialized in the mem_init() method, any flatmem page-holes will be left
in the poisoned/uninitialized state including the IO-memory pages. Thus
any further attempts to map/remap the IO-memory by using MMU may fail.
In particular it happened in my case on attempt to map the SRAM region.
The kernel bootup procedure just crashed on the unhandled unaligned access
bug raised in the __update_cache() method:
> Unhandled kernel unaligned access[#1]:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056
> ...
> Call Trace:
> [<8011ef9c>] __update_cache+0x88/0x1bc
> [<80385944>] ioremap_page_range+0x110/0x2a4
> [<80126948>] ioremap_prot+0x17c/0x1f4
> [<80711b80>] __devm_ioremap+0x8c/0x120
> [<80711e0c>] __devm_ioremap_resource+0xf4/0x218
> [<808bf244>] sram_probe+0x4f4/0x930
> [<80889d20>] platform_probe+0x68/0xec
> ...
Let's fix the problem by initializing the max_mapnr variable as soon as
the required data is available. In particular it can be done right in the
paging_init() method before free_area_init() is called since all the PFN
zone boundaries have already been calculated by that time.
Cc: stable@vger.kernel.org
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d07f951903 upstream.
When processing the last block, the s390 ctr code will always read
a whole block, even if there isn't a whole block of data left. Fix
this by using the actual length left and copy it into a buffer first
for processing.
Fixes: 0200f3ecc1 ("crypto: s390 - add System z hardware support for CTR mode")
Cc: <stable@vger.kernel.org>
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewd-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b21ed7d11 upstream.
If you select CONFIG_EFI_ZBOOT, we will generate vmlinuz.efi, and then
when we go to install the kernel we'll install the vmlinux instead
because install.sh only recognizes Image.gz as wanting the compressed
install image. With CONFIG_EFI_ZBOOT we don't get the proper kernel
installed, which means it doesn't boot, which makes for a very confused
and subsequently angry kernel developer.
Fix this by properly installing our compressed kernel if we've enabled
CONFIG_EFI_ZBOOT.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Cc: <stable@vger.kernel.org> # 6.1.x
Fixes: c37b830fef ("arm64: efi: enable generic EFI compressed boot")
Reviewed-by: Simon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/6edb1402769c2c14c4fbef8f7eaedb3167558789.1702570674.git.josef@toxicpanda.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 482b718a84 upstream.
Commit 8c5fa3b5c4 ("powerpc/64: Make ELFv2 the default for big-endian
builds"), merged in Linux-6.5-rc1 changes the calling ABI in a way
that is incompatible with the current code for the PS3's LV1 hypervisor
calls.
This change just adds the line '# CONFIG_PPC64_BIG_ENDIAN_ELF_ABI_V2 is not set'
to the ps3_defconfig file so that the PPC64_ELF_ABI_V1 is used.
Fixes run time errors like these:
BUG: Kernel NULL pointer dereference at 0x00000000
Faulting instruction address: 0xc000000000047cf0
Oops: Kernel access of bad area, sig: 11 [#1]
Call Trace:
[c0000000023039e0] [c00000000100ebfc] ps3_create_spu+0xc4/0x2b0 (unreliable)
[c000000002303ab0] [c00000000100d4c4] create_spu+0xcc/0x3c4
[c000000002303b40] [c00000000100eae4] ps3_enumerate_spus+0xa4/0xf8
Fixes: 8c5fa3b5c4 ("powerpc/64: Make ELFv2 the default for big-endian builds")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df906ac1-5f17-44b9-b0bb-7cd292a0df65@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d87123aa9a ]
One instance of gpio_backlight_platform_data.fbdev was renamed, but the
second instance was forgotten, causing a build failure:
arch/sh/boards/mach-ecovec24/setup.c: In function ‘arch_setup’:
arch/sh/boards/mach-ecovec24/setup.c:1223:37: error: ‘struct gpio_backlight_platform_data’ has no member named ‘fbdev’; did you mean ‘dev’?
1223 | gpio_backlight_data.fbdev = NULL;
| ^~~~~
| dev
Fix this by updating the second instance.
Fixes: ed369def91 ("backlight/gpio_backlight: Rename field 'fbdev' to 'dev'")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309231601.Uu6qcRnU-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230925111022.3626362-1-geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adb1f95d38 ]
The ending NULL is not taken into account by strncat(), so switch to
strlcat() to correctly compute the size of the available memory when
appending CONFIG_CMDLINE to 'early_cmdline'.
Fixes: 26e7aacb83 ("riscv: Allow to downgrade paging mode from the command line")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/9f66d2b58c8052d4055e90b8477ee55d9a0914f9.1698564026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fca8a117c1 upstream.
The rtc on the mox shares its interrupt line with the moxtet bus. Set
the interrupt type to be consistent between both devices. This ensures
correct setup of the interrupt line regardless of probing order.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Fixes: 21aad8ba61 ("arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b7c510d049 ]
When writing ZA we currently unconditionally flush the buffer used to store
it as part of ensuring that it is allocated. Since this buffer is shared
with ZT0 this means that a write to ZA when PSTATE.ZA is already set will
corrupt the value of ZT0 on a SME2 system. Fix this by only flushing the
backing storage if PSTATE.ZA was not previously set.
This will mean that short or failed writes may leave stale data in the
buffer, this seems as correct as our current behaviour and unlikely to be
something that userspace will rely on.
Fixes: f90b529bcb ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240115-arm64-fix-ptrace-za-zt-v1-1-48617517028a@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
