ad_sd_buffer_postenable() allocates sigma_delta->samples_buf with
devm_krealloc() at runtime, so its devres entry sits after all
probe-time entries of the driver. devm resources are released in
reverse allocation order, which means unbind frees samples_buf before
iio_device_unregister() disables the buffers and detaches the trigger
pollfunc. The data ready IRQ is still enabled at that point, so
ad_sd_trigger_handler() can still run and memcpy() incoming samples
into the freed samples_buf.
Fix this by preallocating the buffer in
devm_ad_sd_setup_buffer_and_trigger(), before the triggered buffer and
the IRQ are set up, so it is freed only after iio_device_unregister()
has drained the trigger handler via free_irq(). Size it for the worst
case of all sequencer slots being active; ad_sd_validate_scan_mask()
already caps the number of active channels at num_slots.
This issue was found by an in-house static analysis tool.
Fixes: 8bea9af887 ("iio: adc: ad_sigma_delta: Add sequencer support")
Cc: stable@vger.kernel.org
Co-developed-by: Song Li <songl@zju.edu.cn>
Signed-off-by: Song Li <songl@zju.edu.cn>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
ade9000_setup_clkout() passes NULL as the register address when
registering a divider clock. During clock registration, the common
clock framework calls clk_divider_recalc_rate(), which dereferences
the address through readl(). As a result, probing an ADE9000 configured
as a clock provider with an external input clock crashes.
CLKOUT passes CLKIN through without changing its rate. Register it as
a 1:1 fixed-factor clock, which does not require register access.
This change does not affect the configuration using the internal clock,
for which the driver does not register a clock provider.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Cc: stable@vger.kernel.org
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
In ad4030_set_avg_frame_len(), the logarithm is calculated before input
validation. Passing zero or negative values leads to an undefined result
from ilog2().
Validate that the input is strictly positive prior to computing its
logarithm.
Fixes: 949abd1ca5 ("iio: adc: ad4030: add averaging support")
Assisted-by: LLM
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Filter enable and filter type selection masks were swapped on data
preparation for filter configuration register write. Use the correct masks
to set each property of post filter configuration.
Fixes: ff06b39be1 ("iio: adc: ad7173: support changing filter type")
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
In case the conversion has failed or returned zero, processing *val
can lead to a division by zero. Need to check for errors, or converted
value is zero, before processing the data. In case the converted value
is zero, e.g. the Vrefint channel, this should be considered as invalid
in all cases.
Fixes: 0e346b2cfa ("iio: adc: stm32-adc: add vrefint calibration support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260911161555.244F31F000FF@smtp.kernel.org/
Cc: stable@vger.kernel.org
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
If an unsupported internal channel like vddgpu is requested, the driver
prints a warning but falls through and assigns it a valid int_ch below.
This causes a problem later during setup:
stm32_adc_int_ch_enable() {
...
case STM32_ADC_INT_CH_VDDGPU:
stm32_adc_set_bits(adc, adc->cfg->regs->or_vddgpu.reg,
adc->cfg->regs->or_vddgpu.mask);
...
}
Because the register offset is uninitialized (0), this performs a
read-modify-write on offset 0, which corresponds to the ISR register.
Fix this by returning before a valid int_ch is assigned. Choice is
made to keep current driver behavior to warn about the channel name.
Fixes: cf0fb80ae1 ("iio: adc: stm32-adc: add stm32mp13 support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260911162602.D323F1F000FF@smtp.kernel.org/
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
A label duplication failure currently reaches the terminating-byte
write. Release the ACPI result and abort before accessing the missing
label; earlier labels are managed by devres.
Detected by static analysis and reviewed with AI-assisted source auditing.
Fixes: 0fb528c825 ("iio: adc: adding support for PAC193x")
Assisted-by: LLM
Signed-off-by: Slavin Liu <bolin.liu@seu.edu.cn>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
A couple of core fixes, the rest usual mix of driver issues that surfaced
from merge window until now.
core
- buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned()
that the full buffer is zeroed.
- trigger: Cancel reenable_work() before freeing the trigger that might be
re-enabled.
dma-buffer
- Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused
entry the mapping might walk off the end.
adi,ade9000
- Wait for power up before requesting interrupts.
- Fix overlap in scan index for current and voltage channels.
- Ensure Phase C dip event included in IRQ1 handler.
adi,adf4377
- Initialize all of a clk_init_data.
adi,adis*
- Ensure debugfs reads are finished before unbind.
adi,axi-adc
- Initialize mutex.
adi,admv1013
- Ensure mutex is intialized before notifier that might use it is
registered.
- Fix wrong channel field used for read_raw.
allwinner,sun4i
- Drop a pm_runtime_put() when there was no get.
- Ensure correct cleanup on driver probe fail due to any issues with
the thermal zone.
aspeed,adc,
- Don't eat reset deassert errors.
awinic,aw96103
- Make sure firmware length is validated rather than blindly trusting
it.
bosch,bmp280
- Fix out of bounds lookup of sampling frequency due to indexing based on
elements in matrix rather than just the correct dimension.
invensense,timestamp library
- Ensure time estimate doesn't invert wrt to current time in a corner
case occasionally seen.
kionix,kx022a
- Off by one in array boundary check.
- Close a memory leak and state corruption in error path.
maxim,max1363
- Sign extend bipolar values to ensure correct reporting to userspace.
maxim,max30102
- Fix NULL dereference by checking there is data in the FIFO before
trying to do anything with it.
microchip,mcp47a1
- Ensure highest possible value actually settable.
pulsed-light,lidar-lite
- Don't leak the IIO device registration if runtime pm setup fails
particularly as it was being freed.
rockchip,saradc
- Fix wrong fallback compatible for rv1106 that lead to trying
to use too many channels (correct support will follow next
merge window)
rohm,bd79124
- Correct limit used for rising alarms.
- Fix which registers related to limits are used in initialization.
- Apply GPIO mask to allow subset of GPIOs to be toggled.
- Add missing regmap error handling in a few places.
- Ensures scale is read only.
rohm,bm1390
- Don't silently eat a data read error.
rohm,bu27034
- Don't silently eat error when reading gain.
- Ensure we infinite delay doesn't happen on error.
semtech,sx9324
- Fix wrong proximity channel resolution.
sharp,gp2ap020a00f
- Make sure to drain irq_work in remove path.
st,vl5310x
- Ensure direct mode is claimed for read_raw avoiding corruption
of buffered accesses.
vishay,vcnl3020
- Use write bits for ISR mask and ensure right event reported.
vti,sca3000
- Fix up a condition check for the frequency divider.
xilinx,xadc
- Swap registration of cleanup of work with that of irq
to ensure that no irqs can cause work that has been freed
to be queued.
x-powers,axp288
- Add bias override quirk for Haier HV103H. Fix because we
used to always override then moved to trusting the firmware
setup - which fixed some boards, but broke others.
-----BEGIN PGP SIGNATURE-----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=gbfP
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 7.3 cycle.
A couple of core fixes, the rest usual mix of driver issues that surfaced
from merge window until now.
core
- buffer: Ensure that when using the iio_push_to_buffers_with_ts_unaligned()
that the full buffer is zeroed.
- trigger: Cancel reenable_work() before freeing the trigger that might be
re-enabled.
dma-buffer
- Fix wrong sizing for a mapped sg_list. If an IOMMU was using a fused
entry the mapping might walk off the end.
adi,ade9000
- Wait for power up before requesting interrupts.
- Fix overlap in scan index for current and voltage channels.
- Ensure Phase C dip event included in IRQ1 handler.
adi,adf4377
- Initialize all of a clk_init_data.
adi,adis*
- Ensure debugfs reads are finished before unbind.
adi,axi-adc
- Initialize mutex.
adi,admv1013
- Ensure mutex is intialized before notifier that might use it is
registered.
- Fix wrong channel field used for read_raw.
allwinner,sun4i
- Drop a pm_runtime_put() when there was no get.
- Ensure correct cleanup on driver probe fail due to any issues with
the thermal zone.
aspeed,adc,
- Don't eat reset deassert errors.
awinic,aw96103
- Make sure firmware length is validated rather than blindly trusting
it.
bosch,bmp280
- Fix out of bounds lookup of sampling frequency due to indexing based on
elements in matrix rather than just the correct dimension.
invensense,timestamp library
- Ensure time estimate doesn't invert wrt to current time in a corner
case occasionally seen.
kionix,kx022a
- Off by one in array boundary check.
- Close a memory leak and state corruption in error path.
maxim,max1363
- Sign extend bipolar values to ensure correct reporting to userspace.
maxim,max30102
- Fix NULL dereference by checking there is data in the FIFO before
trying to do anything with it.
microchip,mcp47a1
- Ensure highest possible value actually settable.
pulsed-light,lidar-lite
- Don't leak the IIO device registration if runtime pm setup fails
particularly as it was being freed.
rockchip,saradc
- Fix wrong fallback compatible for rv1106 that lead to trying
to use too many channels (correct support will follow next
merge window)
rohm,bd79124
- Correct limit used for rising alarms.
- Fix which registers related to limits are used in initialization.
- Apply GPIO mask to allow subset of GPIOs to be toggled.
- Add missing regmap error handling in a few places.
- Ensures scale is read only.
rohm,bm1390
- Don't silently eat a data read error.
rohm,bu27034
- Don't silently eat error when reading gain.
- Ensure we infinite delay doesn't happen on error.
semtech,sx9324
- Fix wrong proximity channel resolution.
sharp,gp2ap020a00f
- Make sure to drain irq_work in remove path.
st,vl5310x
- Ensure direct mode is claimed for read_raw avoiding corruption
of buffered accesses.
vishay,vcnl3020
- Use write bits for ISR mask and ensure right event reported.
vti,sca3000
- Fix up a condition check for the frequency divider.
xilinx,xadc
- Swap registration of cleanup of work with that of irq
to ensure that no irqs can cause work that has been freed
to be queued.
x-powers,axp288
- Add bias override quirk for Haier HV103H. Fix because we
used to always override then moved to trusting the firmware
setup - which fixed some boards, but broke others.
* tag 'iio-fixes-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
iio: proximity: vcnl3020: fix ISR bitmask check in IRQ handler
iio: proximity: vl53l0x-i2c: claim direct mode for raw reads
iio: dac: mcp47a1: Allow full-scale output
iio: accel: kionix-kx022a: Prevent memory leak and fix state
iio: light: rohm-bu27034: Fix infinite delay on error
iio: adc: sun4i-gpadc-iio: clean up on thermal zone registration failure
iio: adc: sun4i-gpadc-iio: drop underflowing pm_runtime_put() calls
iio: adc: axp288: Add TS bias override for Haier HV103H
dt-bindings: iio: adc: rockchip-saradc: Fix RV1106 compatible
dt-bindings: iio: adc: rockchip-saradc: Group single-entries into an enum list
iio: inv_sensors: fix estimated value larger than interrupt timestamp
iio: adc: aspeed: propagate reset deassert errors
iio: buffer-dmaengine: fix sg entry iteration when building dma_vecs
iio: proximity: pulsedlight: fix iio_device left registered on PM setup failure
iio: trigger: cancel reenable_work before freeing trigger
iio: frequency: admv1013: fix wrong channel field used in admv1013_read_raw()
iio: accel: sca3000: fix frequency divider condition check
iio: admv1013: initialize callback mutex before registering notifier
iio: gyro: adis16136: fix unprotected debugfs reads
iio: imu: adis16400: fix unprotected debugfs reads
...
If devm_thermal_of_zone_register() fails, probe returns without
unregistering the IIO map array or disabling runtime PM.
Jump to err_map to release them.
Fixes: b0a242894f ("iio: adc: sun4i-gpadc-iio: register in the thermal after registering in pm")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Neither the error path in sun4i_gpadc_probe() nor sun4i_gpadc_remove()
ever holds a runtime PM usage count. So the pm_runtime_put() in both
places always triggers the "Runtime PM usage count underflow!" warning
on every failed probe and every unbind.
Drop both calls.
Fixes: d1caa99055 ("iio: adc: add support for Allwinner SoCs ADC")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
The Haier HV103H firmware configures the AXP288 TS pin bias
current to 60 uA. This causes the battery temperature reading to
cross the charging temperature threshold under load, incorrectly
stopping battery charging.
Setting the TS bias current to 80 uA fixes the temperature
measurement and prevents charging from being incorrectly disabled.
Add a DMI quirk to use the 80 uA TS bias current on the Haier
HV103H.
Fixes: 9bcf15f75c ("iio: adc: axp288: Fix TS-pin handling")
Fixes: 048058399f ("iio: adc: axp288: Override TS pin bias current for some models") # Add necessary infrastructure
Signed-off-by: Vladyslav Ivashchenko <cactucatu4eckuu@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
aspeed_adc_probe() continues to register ADC resources after deasserting
the shared reset, even if the reset controller reports a failure.
A failed deassertion leaves the hardware unavailable, so stop probing
before installing the cleanup action and enabling the ADC.
Fixes: edf7550a1f ("iio: adc: aspeed: Deassert reset in probe")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The ZYNQ XADC alarm IRQ handler queues zynq_unmask_work via
schedule_delayed_work(); that work is cleared by a devm callback.
Register the devm callback before devm_request_irq() so the devres LIFO
teardown frees the IRQ first, ensuring the handler can no longer queue
work by the time the workqueue is cleared. Otherwise the handler could
re-arm the work and run it after the xadc structure has been freed.
This issue was found by an in-house static analysis tool.
Fixes: 2a9685d1a3 ("iio: adc: xilinx: use more devres helpers and remove remove()")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The bd79124_start_measurement() and bd79124_stop_measurement() ignore
errors from the regmap reads, causing potential use of uninitialized
stack variable when deciding whether the measurement is already
started/stopped. The bd79124_stop_measurement() may also ignore failure
to clear the sequencer state bits, which may make the hardware to ignore
the setting and leave hardware and driver states out of sync.
Check the return value and bail-out if error is detected.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The ROHM BD79124 has pins which can be configured as GPOs or as ADC
inputs. The bd79124gpo_set_multiple() is intended to ensure that a pin
which is requested to be toggled, is indeed configured as a GPO.
The check uses XOR, causing it to fail if mask is not exactly same as
GPO configuration. Eg, if not all GPOs are asked to be toggled at once.
Fix this by checking that mask does not contain pins that are not
configured as GPO, allowing some of the pins which are configured as
GPO to be untouched.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The alarm limit register on BD79124 span to two consecutive registers.
The first register for high-limit containing also hysteresis
configuration. The initialization in driver writes only one 8-bit
register, overwriting the hysteresis and leaving the other limit
register uninitialized.
Fix the limit initialization by using the bd79124_write_int_to_reg(),
which correctly initializes the limit on both of the registers.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The rising alarm is using the cached falling alarm value causing wrong
value to be used.
Fix this by using the correct cached value for rising alarm.
Fixes: 3f57a3b9ab ("iio: adc: Support ROHM BD79124 ADC")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
MAX1363 differential channels are bipolar, but max1363_read_single_chan()
masks the raw value to the ADC resolution without sign-extending it.
Negative differential readings are therefore reported to userspace as
large positive values (e.g. -1 as 4095 on a 12-bit part).
Sign-extend the masked value from the resolution bit for differential
channels. Single-ended channels are unipolar and are left unchanged.
Fixes: d1325cf450 ("Staging: IIO: max1363 ADC driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
ADE9000_ST1_CROSSING_DEPTH is the exclusive upper bound for scanning the
STATUS1 event bits, so a value of 25 left out the highest event bit,
ADE9000_ST1_DIPC_BIT (bit 25). Phase C dip events were never reported.
Bump the value to 26 so bit 25 is scanned.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Current channels used scan_index "num" and voltage "num + 1", so with
phases 0, 1 and 2 the indices overlapped and no longer matched the
IA=0, VA=1, IB=2, VB=3, IC=4, VC=5 layout expected by
ade9000_waveform_buffer_config(). Phase B and C buffers were configured
incorrectly.
Use "num * 2" for current and "num * 2 + 1" for voltage to get the
non-overlapping 0/1, 2/3, 4/5 layout.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The IRQ handlers do SPI register accesses, but the interrupts were
requested before the vdd regulator was enabled. An interrupt arriving
while the chip is unpowered runs a handler against a dead chip, causing
SPI errors or garbage reads.
Request the interrupts after enabling the regulator. This keeps irq1
registered before ade9000_reset(), which waits on it, and lets devm free
the interrupts before the regulator is disabled.
Fixes: 81de7b4619 ("iio: adc: add ade9000 support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The AXI ADC register access paths serialize transactions with st->lock,
but probe does not initialize it. Initialize the mutex before registering
the backend.
Fixes: 7ecb8ee5c9 ("iio: adc: adi-axi-adc: support digital interface calibration")
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging the
iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael Wysocki)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmqPL7YSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1IigH/iBFLcPxeH8fHHMHGNyOwYB2mEJ5NUyO
nJCxvNdmoLqtj12xpfhzSviK0rczFcJD4YGztH7ExbP30gPR3mhG8fo2nEDp8JUK
EOqzo9rzGwENIt1FFGmh6r/e0KMJNP8UwWQr17NJEcoRfrAEEN1kZ5Xl40excQHB
WtKWfYWaICZwmt1u3v2QEWFZJEPovTb9d1Z1ekCdYdmKHq1kn4CCYWhSdFPyCPpL
QjDaIoN2TuRRe5jMEtBqRtdjWo1UyCjc5I+Vz9+mCCOlgMWagizP4Qc+qsBJ9UfA
vY46s+RFTyISIQ9eHnHdiIYdLlnoweS5wsGqiBXmncrvVOH8u3GBYfw=
=e7sH
-----END PGP SIGNATURE-----
Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code than
removed, which was a nice change. Highlights in this merge request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while, with the only reported
issues being some major merge conflicts. Miguel pointed out some of
these with the Rust tree merge, which is the majority of them. I'll
follow up with a diffstat of the merge resolution I made against your
most recent tree, which works for me.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCao143A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymtUgCeKB62gT1JfA86cg3NDB1opp+10N0An3oBBegQ
IJLqJgK45dTNtMGBwGFV
=68af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
-----BEGIN PGP SIGNATURE-----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=4ayG
-----END PGP SIGNATURE-----
Merge tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO new device support, features, cleanup for 7.3
Includes a merge of 7.2-rc2 to pick up the changes around
mod_devicetable.h and reduce resulting conflicts around includes.
New device support
------------------
adi,ad3530R
- Add support for the AD3532R and AD3532 16 channel DACs.
adi,ad4080
- Add support for the AD4883 ADC.
adi,ad5686
- Add support for AD5313R, AD5317R, AD5674, AD5687R, AD5689, AD5689R DACs
over SPI
- Add support for AD5316R, AD5674, AD5697R and AD5696 DACs over I2C
- Significant driver refactoring prior to these additions, partly to reduce
bus traffic and to add triggered buffer and gain control support. An
earlier set added support for missing supplies, reset and LDAC GPIO.
adi,adf41513
- New driver to support this PLL frequency synthesizer that runs up to
26.5 GHz.
- Included infrastructure to handle higher precision attributes with
extensive tests
adi,ltc2378-20
- New driver supporting LTC2338, LTC2364, LTC2367, LTC2368, LT2369, LTC2370
LTC2376, LTC2377, LTC2378, LTC2379 and LTC23980 ADCs with both high speed
capture via appropriate backend and conventional triggered buffer SPI
capture.
invensense,icm42607
- New driver for this IMU.
mediateck,mt6323
- New driver for this PMIC ADC.
microchip,mcp47a1
- New driver for this I2C 6 bit DAC.
nxp,mcf54415-dac
- New driver for this DAC found in NXP SoCs.
qst,qmc5884l
- New driver for this 3 axis magnetometer. Included dt vendor entry for qst.
qst,qmc6308
- New driver for this 3 axis magnetometer.
sensiron,slf3s
- New driver for this liquid flow sensor. Includes adding IIO_VOLUMEFLOW
channel type.
st,vl53l1x
- Refactors to improve readability.
ti,ads112c14
- New driver supporting the ADS112C14 and ADS122C14 ADCs. These bring
some new ABI for input chopping, particular useful for resistive sensors
like thermocouples or Wheatstone bridges.
- Support CRC8 detection of corruption on the bus.
- Support buffered reads.
ti,tmp117
- (trivial) Add support for the tmp119 temperature sensor.
xilinx,versal-sysmon
- New ADC driver for this block found on various FPGAs including various
bus interfaces, threshold and oversampling support.
dt binding updates
------------------
new shared bindings
- excitation-channels and excitation-current-nanoamp allow per channel
specification of currents used for resistive sensor measurement.
- reference-sources property to allow selection of a per channel reference.
rockchip,saradc
- Add RV1106 which is compatible with the RV3588.
Features
--------
buffer-dmaengine
- Allow cyclic buffers, useful for repeating sequence generation with DACs.
devantech,dmard09
- Implement read back of channel scale - previously interface always
returned an error.
hid,sensors-als
- Enable separate channel scaling for hardware that supports it.
invensense,timestamp library
- Various precision improvements.
invensense,icm42600
- Add support for hwfifo watermark interfaces.
taos,tcs3472
- Support wait time and sampling frequency control.
Cleanups, minor fixes
---------------------
Minor cleanups not mentioned at all in this summary such
as white space fixes or typos.
Affecting various drivers
- Cleanup of conditionals that had no affect.
- Drop some runtime pm local wrappers as now runtime_pm does the
mark_last_busy part inside the put, these provide no useful code
deduplication or readability advantages over directly calling the
runtime_pm functions.
- Return 0 from write_raw() on success.
- Use of dev_err_probe() to simplify code and sometimes provide useful
info for deferred probe debugging.
- Drop some redundant error prints where the called function already
provides information on errors.
- Make some read only arrays in functions static.
- Fix up missing handling of regcache_sync() errors.
- Drop some false kernel-doc markings.
- Add missing MODULE_DEVICE_TABLE for some of_match_id tables.
- Use local variables for things like the struct device to shorten and
improve readability of code.
- Drop some unused structure elements.
- Reorder dds.h macro parameters to be inline with others.
- Header reorders and IWYU. Often part of a more significant series.
- Remove abstractions designed to allow a driver to support multiple device
types, when they have been around a long time and only the original part
showed up.
- Initialize spi_device_id arrays using member names following dropping of
driver data from drivers that didn't actually use it.
- Catch up with i2c_device_id tables added since previous effort to use
named initializers for all those.
- Use kernel types in a few places instead of standard C ones or bare
unsigned.
Misc
- Update Xilinx AMS maintainer.
- Update email address for Maxwell Doose.
- Update email address for Siratul Islam.
- Update email address for Tomasz Duszynski and re-add Tomasz to
various maintainer entries.
Docs
- Encourage use of differential channel naming even when there is no
flexibility in input to differential pair mapping. Intended to
provide a strong signal to userspace that a channel is differential.
adi,ad_sigma_delta
- Allow COMPILE_TEST without any users.
adi,ad2s1201
- Refactor trigger handler to avoid mix of guard() and goto.
adi,ad5686
- Avoid potential NULL dereference is user forces a driver bind.
adi,ad5696
- Add a couple of missing entries to the of_match_id table and update
binding to match.
atmel,ad91_adc
- Use const char * for DT string property allowing a cast to be dropped.
avia,hx711
- Various refactors and cleanup to enable support of additional parts
(to come)
- Add missing supply and gpio dt-bindings.
bosch,bmc150
- Harden against device reporting too large a FIFO sample count.
- Use FIELD_PREP() / FIELD_GET() to improve readability.
freescale,fxls8962af
- Harden against device reporting too large a FIFO sample count.
hid-sensors-*
- Reorder probe to not expose userspace interfaces until the rest of
the setup is done to avoid potentially dropping data.
honeywell,abp2030pa
- Drop an unreachable return.
invensens,icm45600
- Harden against bad value of FIFO sample count from device.
- Use i2c_match_data if firmware table sourced match data isn't available.
nxp,mpl1115
- Ensure runtime_pm is balanced on error in probe.
rohm,bm1390
- Make the driver slightly more likely to recover from transient errors.
sensiron,sgp30
- Handle thread creation errors.
st,lsm6dsx
- Update the enable mask when doing sensor fusion to avoid incorrect fifo
data handling.
st,stm32-dfsdm
- Treat dt flags as booleans.
ti,ads1015
- Switch to devm helpers which simplified code and closed a resource leak.
ti,opt3001
- Split complicated opt3001_get_processed() logic into irq an no irq
helper functions.
- Use devm to simplify code.
- Use guard() to simplify code.
- Reorder probe so final call exposes userspace interfaces.
- Various other more minor cleanup
taos,tsl2772
- Fix calibscale readback to check right channel type.
taos,tsl2583
- Use sysfs_emit() and sysfs_emit_at() to replace open coded equivalents.
* tag 'iio-for-7.3a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (232 commits)
iio: dac: mcp47a1: add support for new device
dt-bindings: iio: dac: add support for mcp47a1
iio: Update email for Maxwell Doose
iio: imu: st_lsm6dsx: Update enable mask when using sensor fusion
iio: light: cm32181: return zero after writing calibscale
iio: flow: add Sensirion SLF3S liquid flow sensor driver
iio: core: add IIO_VAL_DECIMAL64_FEMTO format type
dt-bindings: iio: flow: add Sensirion SLF3S liquid flow sensor
iio: types: add IIO_VOLUMEFLOW channel type
iio: ABI: Encourage differential voltage ABI usage
iio: adc: ltc2378: Add support for LTC2338-18
iio: adc: ltc2378: Enable triggered buffer data capture
iio: adc: ltc2378: Enable high-speed data capture
iio: adc: ltc2378: Add support for LTC2378-20 and similar ADCs
dt-bindings: iio: adc: Add ltc2378
iio: magnetometer: ak8974: remove conditional return with no effect
iio: light: tsl2583: remove conditional return with no effect
iio: adc: rcar-gyroadc: remove rcar_gyroadc_set_power() helper
iio: light: vcnl4000: remove vcnl4000_set_pm_runtime_state() helper
iio: light: vcnl4035: remove vcnl4035_set_pm_runtime_state() helper
...
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
-----BEGIN PGP SIGNATURE-----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=N4R+
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of fixes for the 7.2 cycle.
Given timing these are probably now merge window material.
Usual mixed bunch of ancient issues and newer ones.
core,buffer
- Fix a potential UAF in release on anonymous buffers.
- Make sure DMA fence lock lifetime matches that of the DMA fence.
- Make IIO DMA fence release RCU safe.
various
- Kconfig missing REGMAP* related selects.
- Unbalance of runtime pm or regulators in error paths.
adi,ad3552r-hs
- Fixing wrong buffers size for string printing.
adi,ad4080
- Fix 16-bit part support by adding path to tell the backend what
the data size is - avoiding corrupted data capture.
adi,ad5446
- Wrong MODULE_DEVICE_TABLE() type due to case error.
atlas,sensor
- Drop use of irq_work() in favour of iio_trigger_poll_nested() avoiding
a possible UAF.
hid-temperature
- Potential release ordering issue due to mixed devm and not that
can lead to long timeouts.
infineon,dps310
- Fix NULL dereference on ACPI platforms.
invense,mpu3050
- Fix sign of raw angular velocity readings.
mitsubishi,m62332
- Fix a regulator reference counting issue when switching channels.
sharp,gp2ap002
- Unbalanced runtime PM on repeated event writes.
- Reenable irq if runtime suspend fails.
ti,ads7138
- Disable statistics gathering whilst reading conversions results
to avoid data corruption.
ti,opt4001
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Fix use of wrong register.
- Pointer type mismatch to div_u64_rem()
- Fix reversed GENMASK() arguements.
ti,opt4060
- Ensure integration times with integer part are rejected rather than
ignoring the integer part of the value.
- Pointer type mismatch to div_u64_rem()
- Wrong register name in an error print.
ti,pac1921
- Fix wrong channel used in the trigger handler for some combinations
of enabled channels.
* tag 'iio-fixes-for-7.2b-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (31 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmp2NLQACgkQqDIjiipP
6E98UAf/SqeabRuCefz1qn4zdjQHL4jiIEHrhRvXLSPb2ooVhzZYpOP5sUXFG1W5
XxncjSyo7ZJKhVXrCd7II7GW6+3TqujM+MWpcYBerGsrLH0YudcOkAl8gTkhSXfV
ZfuKbSYR+mrLyWbszIzbyknaGFFt4xdkusTldhWA80dHb1G5o055/unVtVEDDn65
ciLmZqHBW+r0ureVhu6FJ5FNozCKfX4hXZOsX95FvIJEBvlDORHZmCEsaxbD1bem
mMcs2tU74s2eJtRmKuq7A2ddw23dUTxTUciiCh6r5h/dI0MTxaEZUpF5TjXvfEQE
Ick0gsWEc77263AS/2WAoTodQfBP5A==
=8Vte
-----END PGP SIGNATURE-----
Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:
"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)
- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in an OF code comment (Marek Vasut)
- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...
pac1921_trigger_handler() walks the enabled channels with
iio_for_each_active_channel(), which yields the scan index (bit) of each
active channel, while ch is a separate counter used to pack the samples
contiguously into the scan buffer.
The register to read was looked up with the packing counter instead of
the scan index:
ret = pac1921_read_res(priv, idev->channels[ch].address, &val);
pac1921_channels[] is ordered by scan index, so channels[bit] is the
channel that is actually enabled, whereas channels[ch] is merely the
ch-th array entry. These coincide only when the enabled channels form a
contiguous prefix (e.g. all channels enabled). With a sparse scan mask -
for example when only the power channel (scan index 3) is enabled - the
handler reads the wrong register (VBUS instead of VPOWER) and pushes it
to userspace as the enabled channel's data.
Index the channel array by the scan index (bit) to read the correct
register, keeping ch only for contiguous packing into the scan buffer.
Fixes: 371f778b83 ("iio: adc: add support for pac1921")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4
Signed-off-by: Cong Nguyen <congnt264@gmail.com>
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The AXI backend needs to know the ADC word width in order to pack the
sample data correctly on the bus. During channel setup, program the
backend packet format via iio_backend_data_size_set() using the channel
resolution, so the data is transferred according to the device's
realbits.
The backend packet format field defaults to 20-bit packing, so the
20-bit parts (AD4080/AD4081/AD4082, AD4880) were unaffected. The 16-bit
(AD4083/AD4084/AD4085, AD4884) and 14-bit (AD4086/AD4087/AD4088) parts,
however, were left packing data at the wrong width, producing corrupt
buffered captures.
Fixes: 6c3e726573 ("iio: adc: ad4080: add support for AD4084")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The AD408X AXI core can pack the sample data on the bus using different
word widths. Expose this through the data_size_set backend operation so
that frontends can program the packet format field (bits 3:2 of the
CNTRL_3 register) according to the ADC resolution: 20-bit, 16-bit and
14-bit map to packet format values 0, 1 and 2 respectively.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
There is a data race in reading the STATS registers, resulting in wrong
data being read. When the data in the RECENT register switches between
0x24F0 and 0x2500, occasionally value 0x2400 or 0x25F0 is read. This
happens when the value is updated in between reading MSB and LSB.
The data sheet says: "Until a new conversion result is available,
previous values can be read from the statistics registers. Before
reading the statistics registers, set STATS_EN to 0 to prevent any
updates to this register block." As the STATS_EN is currently not
cleared, the values of the stats registers might change mid read,
giving faulty values.
Disable the STATS_EN bit before reading one of the statistics registers to
make sure the device does not update the register mid read. This is
applicable to registers MAX_CHn_xSB, MIN_CHn_xSB and RECENT_CHn_xSB.
This means reading one of the statistics registers resets the MAX and
MIN registers. This is unfortunate, but necessary to get correct data
from the device.
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Fixes: 024b08fee3 ("iio: adc: Add driver for ADS7128 / ADS7138")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
The SDAM0 IRQ can be triggered for both EOC (end of conversion) events for
immediate ADC reads done in this driver and for threshold violation events,
based on ADC_TM thresholds configured from the auxiliary ADC_TM driver on
TM channels on the first SDAM.
At present, this interrupt is handled only in the ISR in the main ADC driver.
When the ISR is triggered for an ADC_TM event, this driver notifies the ADC_TM
driver by calling a notifier callback exposed from it for this purpose.
To simplify the interrupt handling in both drivers, share the interrupt between
the drivers. With this, ADC_TM interrupts on SDAM0 will be handled directly in
the ADC_TM driver, so remove the notifier callback and all TM interrupt
handling in the main ADC ISR.
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Link: https://patch.msgid.link/20260722-gen3_adc_tm-v4-2-011981f756c8@oss.qualcomm.com
devm_request_threaded_irq() internally prints an error message using
dev_err_probe() in case of any errors. Remove the error print in the
devm_request_threaded_irq() failure path as it is not needed.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Link: https://patch.msgid.link/20260722-gen3_adc_tm-v4-1-011981f756c8@oss.qualcomm.com
LTC2338-18 is similar to LTC2378-18, differentiating from the already
supported part mainly on the embedment of an internal voltage reference and
addition of a resistor divider network connected to the input signal path.
Extend the device driver, handling the internal reference and input signal
attenuation, enabling it to also support LTC2338-18.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Enable users to run triggered data captures with LTC2378 and similar ADCs.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Make use of SPI transfer offloading to speed up data capture, enabling data
acquisition at faster sample rates (up to 2 MSPS).
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Support for LTC2378-20 and similar analog-to-digital converters.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
rcar_gyroadc_set_power() just calls pm_runtime_resume_and_get() or
pm_runtime_put_autosuspend() depending on its bool argument. Call them
directly and remove the helper.
No functional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for buffered reads using a triggered buffer.
The device has a continuous conversion mode, but that can only be used
with one channel at a time since there is nothing like a sequencer to
support that in hardware. Instead, we use single-shot reads like we do
for direct reads to be able to read multiple channels.
Since CRC is always enabled, buffered reads include the CRC byte along
with the raw data without verifying it. This allows userspace to perform
it's own CRC verification per-sample and drop bad samples rather than
failing the entire buffered read for one bad sample.
Support for continuous conversion mode could be added in the future if
needed.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for I2C CRC8 to the TI ADS112C14 ADC driver. This verifies
data integrity of all I2C transactions with the device.
For now, it is always enabled, but it could be made optional in the
future if needed (e.g. for higher-speed data acquisition).
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Extend the reg_mask_xlate callback with an operation type parameter
(enum gpio_regmap_operation) to allow drivers to return different
register/mask combinations depending on the specific GPIO operation.
Consequently, update all existing drivers utilizing the gpio-regmap
framework (across drivers/gpio, drivers/iio, and drivers/pinctrl)
to accommodate the new reg_mask_xlate function signature.
Acked-by: William Breathitt Gray <wbg@kernel.org>
Acked-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com> #for-iio
Suggested-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Link: https://patch.msgid.link/20260726125209.140307-6-eleanor.lin@realtek.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Declare the local variable as const char * and remove the unnecessary cast
when passing it to of_property_read_string().
Signed-off-by: Amin GATTOUT <amin.gattout@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for the AD4883, a dual-channel, 16-bit, 40 MSPS SAR ADC.
The AD4883 is the dual-channel variant of the AD4083, sharing the same
register map and SPI interface as the rest of the AD4080 family. Like
the AD4880, it uses two independent ADC channels, each with its own SPI
configuration interface.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Don't populate the read-only const array config on the stack at run
time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add debugfs register access to the ads112c14 driver. This is a complex
chip and being able to poke registers is useful for debugging and
diagnostic/calibration purposes.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add support for parsing devicetree properties for measurement channels
and doing direct reads on these.
There are quite a lot of conditions that have to be met for each
measurement to be made, so quite a bit of state and algorithms are
required to handle it.
Channels are created dynamically since the number of possibilities is
unreasonably large.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Implement support for the programmable gain amplifier on the internal
short SYS_MON channel. This channel is used for calibration, so it is
useful to be able to set the PGA to the same gain as the external
channels. The gain setting is implemented via the `_scale` attribute.
In the future, we may want to support different reference voltages for
this channel, so the scale_available table is populated during probe
rather than being a static table.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
Add a new driver for the TI ADS112C14/ADS122C14 ADC chips.
This first step is adding a very basic driver that only supports power
on/reset and reading the system monitor channels.
ADS112C14_SYS_MON_CHANNEL_SHORT is the last channel rather than being in
logical order by address to keep the voltage channels together and in
case we find we need to add variants of this channel with different
voltage reference later.
Signed-off-by: David Lechner (TI) <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
