The kernel-doc in lib/hweight.c is global to the file and
currently has issues:
Warning: lib/hweight.c:13 expecting prototype for hweightN(). Prototype was for __sw_hweight32() instead
Warning: lib/hweight.c:13 function parameter 'w' not described in '__sw_hweight32'
Update it accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
AVX-512 supports 3-input XORs via the vpternlogd (or vpternlogq)
instruction with immediate 0x96. This approach, vs. the alternative of
two vpxor instructions, is already used in the CRC, AES-GCM, and AES-XTS
code, since it reduces the instruction count and is faster on some CPUs.
Make blake2s_compress_avx512() take advantage of it too.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Just before returning, blake2s_compress_ssse3() and
blake2s_compress_avx512() store updated values to the 'h', 't', and 'f'
fields of struct blake2s_ctx. But 'f' is always unchanged (which is
correct; only the C code changes it). So, there's no need to write to
'f'. Use 64-bit stores (movq and vmovq) instead of 128-bit stores
(movdqu and vmovdqu) so that only 't' is written.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Various cleanups for readability. No change to the generated code:
- Add some comments
- Add #defines for arguments
- Rename some labels
- Use decimal constants instead of hex where it makes sense.
(The pshufd immediates intentionally remain as hex.)
- Add blank lines when there's a logical break
The round loop still could use some work, but this is at least a start.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Following the usual practice, prefix the names of the data labels with
".L" so that the assembler treats them as truly local. This more
clearly expresses the intent and is less error-prone.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since blake2s_compress() is always passed nblocks != 0, remove the
unnecessary check for nblocks == 0 from blake2s_compress_ssse3().
Note that this makes it consistent with blake2s_compress_avx512() in the
same file as well as the arm32 blake2s_compress().
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
In the C code, the 'inc' argument to the assembly functions
blake2s_compress_ssse3() and blake2s_compress_avx512() is declared with
type u32, matching blake2s_compress(). The assembly code then reads it
from the 64-bit %rcx. However, the ABI doesn't guarantee zero-extension
to 64 bits, nor do gcc or clang guarantee it. Therefore, fix these
functions to read this argument from the 32-bit %ecx.
In theory, this bug could have caused the wrong 'inc' value to be used,
causing incorrect BLAKE2s hashes. In practice, probably not: I've fixed
essentially this same bug in many other assembly files too, but there's
never been a real report of it having caused a problem. In x86_64, all
writes to 32-bit registers are zero-extended to 64 bits. That results
in zero-extension in nearly all situations. I've only been able to
demonstrate a lack of zero-extension with a somewhat contrived example
involving truncation, e.g. when the C code has a u64 variable holding
0x1234567800000040 and passes it as a u32 expecting it to be truncated
to 0x40 (64). But that's not what the real code does, of course.
Fixes: ed0356eda1 ("crypto: blake2s - x86_64 SIMD implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102234209.62133-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Remove self-references to filenames from assembly files in
lib/crypto/arm/ and lib/crypto/arm64/. This follows the recommended
practice and eliminates an outdated reference to sha2-ce-core.S.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251102014809.170713-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Some z/Architecture processors can compute a SHA-3 digest in a single
instruction. arch/s390/crypto/ already uses this capability to optimize
the SHA-3 crypto_shash algorithms.
Use this capability to implement the sha3_224(), sha3_256(), sha3_384(),
and sha3_512() library functions too.
SHA3-256 benchmark results provided by Harald Freudenberger
(https://lore.kernel.org/r/4188d18bfcc8a64941c5ebd8de10ede2@linux.ibm.com/)
on a z/Architecture machine with "facility 86" (MSA level 12):
Length (bytes) Before (MB/s) After (MB/s)
============== ============= ============
16 212 225
64 820 915
256 1850 3350
1024 5400 8300
4096 11200 11300
Note: the original data from Harald was given in the form of a graph for
each length, showing the distribution of throughputs from 500 runs. I
guesstimated the peak of each one.
Harald also reported that the generic SHA-3 code was at most 259 MB/s
(https://lore.kernel.org/r/c39f6b6c110def0095e5da5becc12085@linux.ibm.com/).
So as expected, the earlier commit that optimized sha3_absorb_blocks()
and sha3_keccakf() is the more important one; it optimized the Keccak
permutation which is the most performance-critical part of SHA-3.
Still, this additional commit does notably improve performance further
on some lengths.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-13-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add support for architecture-specific overrides of sha3_224(),
sha3_256(), sha3_384(), and sha3_512(). This will be used to implement
these functions more efficiently on s390 than is possible via the usual
init + update + final flow.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-12-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Implement sha3_absorb_blocks() and sha3_keccakf() using the hardware-
accelerated SHA-3 support in Message-Security-Assist Extension 6.
This accelerates the SHA3-224, SHA3-256, SHA3-384, SHA3-512, and
SHAKE256 library functions.
Note that arch/s390/crypto/ already has SHA-3 code that uses this
extension, but it is exposed only via crypto_shash. This commit brings
the same acceleration to the SHA-3 library. The arch/s390/crypto/
version will become redundant and be removed in later changes.
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-11-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Instead of exposing the arm64-optimized SHA-3 code via arm64-specific
crypto_shash algorithms, instead just implement the sha3_absorb_blocks()
and sha3_keccakf() library functions. This is much simpler, it makes
the SHA-3 library functions be arm64-optimized, and it fixes the
longstanding issue where the arm64-optimized SHA-3 code was disabled by
default. SHA-3 still remains available through crypto_shash, but
individual architectures no longer need to handle it.
Note: to see the diff from arch/arm64/crypto/sha3-ce-glue.c to
lib/crypto/arm64/sha3.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Since the SHA-3 algorithms are FIPS-approved, add the boot-time
self-test which is apparently required. This closely follows the
corresponding SHA-1, SHA-256, and SHA-512 tests.
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
In crypto/sha3_generic.c, the keccakf() function calls keccakf_round()
to do four of Keccak-f's five step mappings. However, it does not do
the Iota step mapping - presumably because that is dependent on round
number, whereas Theta, Rho, Pi and Chi are not.
Note that the keccakf_round() function needs to be explicitly
non-inlined on certain architectures as gcc's produced output will (or
used to) use over 1KiB of stack space if inlined.
Now, this code was copied more or less verbatim into lib/crypto/sha3.c,
so that has the same aesthetic issue. Fix this there by passing the
round number into sha3_keccakf_one_round_generic() and doing the Iota
step mapping there.
crypto/sha3_generic.c is left untouched as that will be converted to use
lib/crypto/sha3.c at some point.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add SHA-3 support to lib/crypto/. All six algorithms in the SHA-3
family are supported: four digests (SHA3-224, SHA3-256, SHA3-384, and
SHA3-512) and two extendable-output functions (SHAKE128 and SHAKE256).
The SHAKE algorithms will be required for ML-DSA.
[EB: simplified the API to use fewer types and functions, fixed bug that
sometimes caused incorrect SHAKE output, cleaned up the
documentation, dropped an ad-hoc test that was inconsistent with
the rest of lib/crypto/, and many other cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a02 ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.
Cc: stable@vger.kernel.org
Fixes: 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Clarify that the return values of vsprintf() and sprintf() exclude the
trailing NUL character.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251103090913.2066-2-thorsten.blum@linux.dev
Signed-off-by: Petr Mladek <pmladek@suse.com>
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support for
it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQWN/gAKCRAdayaRccAa
ljUzAQCGh5zhfwsCfMc5M7/9v2FiEBKNzTc/xTK04vWdZ3A39QEA6XuyVx+QPBkS
ts7gPrR6NC7AokdqTHXKhBW/ebaNOw0=
=GmCb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
Fixes log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action(). Updates email address for Rae Moar in
MAINTAINERS KUnit entry.
-----BEGIN PGP SIGNATURE-----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=stUG
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"Fix log overwrite in param_tests and fixes incorrect cast of priv
pointer in test_dev_action().
Update email address for Rae Moar in MAINTAINERS KUnit entry"
* tag 'linux_kselftest-kunit-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
MAINTAINERS: Update KUnit email address for Rae Moar
kunit: prevent log overwrite in param_tests
kunit: test_dev_action: Correctly cast 'priv' pointer to long*
Migrate the arm-optimized BLAKE2b code from arch/arm/crypto/ to
lib/crypto/arm/. This makes the BLAKE2b library able to use it, and it
also simplifies the code because it's easier to integrate with the
library than crypto_shash.
This temporarily makes the arm-optimized BLAKE2b code unavailable via
crypto_shash. A later commit reimplements the blake2b-* crypto_shash
algorithms on top of the BLAKE2b library API, making it available again.
Note that as per the lib/crypto/ convention, the optimized code is now
enabled by default. So, this also fixes the longstanding issue where
the optimized BLAKE2b code was not enabled by default.
To see the diff from arch/arm/crypto/blake2b-neon-glue.c to
lib/crypto/arm/blake2b.h, view this commit with 'git show -M10'.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add a library API for BLAKE2b, closely modeled after the BLAKE2s API.
This will allow in-kernel users such as btrfs to use BLAKE2b without
going through the generic crypto layer. In addition, as usual the
BLAKE2b crypto_shash algorithms will be reimplemented on top of this.
Note: to create lib/crypto/blake2b.c I made a copy of
lib/crypto/blake2s.c and made the updates from BLAKE2s => BLAKE2b. This
way, the BLAKE2s and BLAKE2b code is kept consistent. Therefore, it
borrows the SPDX-License-Identifier and Copyright from
lib/crypto/blake2s.c rather than crypto/blake2b_generic.c.
The library API uses 'struct blake2b_ctx', consistent with other
lib/crypto/ APIs. The existing 'struct blake2b_state' will be removed
once the blake2b crypto_shash algorithms are updated to stop using it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-7-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
A couple more small cleanups to the BLAKE2s code before these things get
propagated into the BLAKE2b code:
- Drop 'const' from some non-pointer function parameters. It was a bit
excessive and not conventional.
- Rename 'block' argument of blake2s_compress*() to 'data'. This is for
consistency with the SHA-* code, and also to avoid the implication
that it points to a singular "block".
No functional changes.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
For consistency with the SHA-1, SHA-2, SHA-3 (in development), and MD5
library APIs, rename blake2s_state to blake2s_ctx.
As a refresher, the ctx name:
- Is a bit shorter.
- Avoids confusion with the compression function state, which is also
often called the state (but is just part of the full context).
- Is consistent with OpenSSL.
Not a big deal, of course. But consistency is nice. With a BLAKE2b
library API about to be added, this is a convenient time to update this.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reorder the parameters of blake2s() from (out, in, key, outlen, inlen,
keylen) to (key, keylen, in, inlen, out, outlen).
This aligns BLAKE2s with the common conventions of pairing buffers and
their lengths, and having outputs follow inputs. This is widely used
elsewhere in lib/crypto/ and crypto/, and even elsewhere in the BLAKE2s
code itself such as blake2s_init_key() and blake2s_final(). So
blake2s() was a bit of an exception.
Notably, this results in the same order as hmac_*_usingrawkey().
Note that since the type signature changed, it's not possible for a
blake2s() call site to be silently missed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251018043106.375964-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Add FIPS cryptographic algorithm self-tests for all SHA-1 and SHA-2
algorithms. Following the "Implementation Guidance for FIPS 140-3"
document, to achieve this it's sufficient to just test a single test
vector for each of HMAC-SHA1, HMAC-SHA256, and HMAC-SHA512.
Just run these tests in the initcalls, following the example of e.g.
crypto/kdf_sp800108.c. Note that this should meet the FIPS self-test
requirement even in the built-in case, given that the initcalls run
before userspace, storage, network, etc. are accessible.
This does not fix a regression, seeing as lib/ has had SHA-1 support
since 2005 and SHA-256 support since 2018. Neither ever had FIPS
self-tests. Moreover, fips=1 support has always been an unfinished
feature upstream. However, with lib/ now being used more widely, it's
now seeing more scrutiny and people seem to want these now [1][2].
[1] https://lore.kernel.org/r/3226361.1758126043@warthog.procyon.org.uk/
[2] https://lore.kernel.org/r/f31dbb22-0add-481c-aee0-e337a7731f8e@oracle.com/
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251011001047.51886-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 5ff8c11775 ("KMSAN: Remove tautological checks") changed
CONFIG_HAVE_KMSAN_COMPILER from a dynamic check for
'-fsanitize=kernel-memory' to just being true for CONFIG_CC_IS_CLANG.
This missed the fact that not all architectures supported
'-fsanitize=kernel-memory' at the same time. For example, SystemZ / s390
gained support for KMSAN in clang-18 [1], so builds with clang-15
through clang-17 can select KMSAN but they error with:
clang-16: error: unsupported option '-fsanitize=kernel-memory' for target 's390x-unknown-linux-gnu'
Restore the cc-option check for '-fsanitize=kernel-memory' to make sure
the compiler target properly supports '-fsanitize=kernel-memory'. The
check for '-msan-disable-checks=1' does not need to be restored because
all supported clang versions for building the kernel support it.
Fixes: 5ff8c11775 ("KMSAN: Remove tautological checks")
Link: a3e56a8792 [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202510220236.AVuXXCYy-lkp@intel.com/
Acked-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20251023-fix-kmsan-check-s390-clang-v1-1-4e6df477a4cc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
When running parameterized tests, each test case is initialized with
kunit_init_test(). This function takes the test_case->log as a parameter
but it clears it via string_stream_clear() on each iteration.
This results in only the log from the last parameter being preserved in
the test_case->log and the results from the previous parameters are lost
from the debugfs entry.
Fix this by manually setting the param_test.log to the test_case->log
after it has been initialized. This prevents kunit_init_test() from
clearing the log on each iteration.
Link: https://lore.kernel.org/r/20251024190101.2091549-1-cmllamas@google.com
Fixes: 4b59300ba4 ("kunit: Add parent kunit for parameterized test context")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
freader_fetch currently reads from at most two folios. When a read spans
into a third folio, the overflow bytes are copied adjacent to the second
folio’s data instead of being handled as a separate folio.
This patch modifies fetch algorithm to support reading from many folios.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251026203853.135105-5-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move struct freader and prototypes of the functions operating on it into
the buildid.h.
This allows reusing freader outside buildid, e.g. for file dynptr
support added later.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251026203853.135105-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This old alias for in_hardirq() has been marked as deprecated since
2020; remove the stragglers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024180654.1691095-1-willy@infradead.org
The previous implementation incorrectly assumed the original type of
'priv' was void**, leading to an unnecessary and misleading
cast. Correct the cast of the 'priv' pointer in test_dev_action() to
its actual type, long*, removing an unnecessary cast.
As an additional benefit, this fixes an out-of-bounds CHERI fault on
hardware with architectural capabilities. The original implementation
tried to store a capability-sized pointer using the priv
pointer. However, the priv pointer's capability only granted access to
the memory region of its original long type, leading to a bounds
violation since the size of a long is smaller than the size of a
capability. This change ensures that the pointer usage respects the
capabilities' bounds.
Link: https://lore.kernel.org/r/20251017092814.80022-1-florian.schmaus@codasip.com
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
KHO test stores physical addresses of the preserved folios directly in
fdt. Use kho_preserve_vmalloc() instead of it and kho_restore_vmalloc()
to retrieve the addresses after kexec.
This makes the test more scalable from one side and adds tests coverage
for kho_preserve_vmalloc() from the other.
Link: https://lkml.kernel.org/r/20250921054458.4043761-5-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Changyuan Lyu <changyuanl@google.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaOAhtRQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bGkAP91Vptp6rJj3R0N0M338tzkVaeybA+V
fjOHnuB8AvF+FwD/XGLF+lcIFiB8GizXGf/OoyXJwYwciNU7hEdONh5dzQ0=
=euve
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just a couple of changes: crypto code cleanup and a IMA xattr bug fix"
* tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr
lib/digsig: Use SHA-1 library instead of crypto_shash
integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS
Drivers:
- Add ciphertext hiding support to ccp.
- Add hashjoin, gather and UDMA data move features to hisilicon.
- Add lz4 and lz77_only to hisilicon.
- Add xilinx hwrng driver.
- Add ti driver with ecb/cbc aes support.
- Add ring buffer idle and command queue telemetry for GEN6 in qat.
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable.
- Fix CPU number wraparound in padata.
-----BEGIN PGP SIGNATURE-----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=knnk
-----END PGP SIGNATURE-----
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
Now that a SHA-1 library API is available, use it instead of
crypto_shash. This is simpler and faster.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
- The 3 patch series "ida: Remove the ida_simple_xxx() API" from
Christophe Jaillet completes the removal of this legacy IDR API.
- The 9 patch series "panic: introduce panic status function family"
from Jinchao Wang provides a number of cleanups to the panic code and
its various helpers, which were rather ad-hoc and scattered all over the
place.
- The 5 patch series "tools/delaytop: implement real-time keyboard
interaction support" from Fan Yu adds a few nice user-facing usability
changes to the delaytop monitoring tool.
- The 3 patch series "efi: Fix EFI boot with kexec handover (KHO)" from
Evangelos Petrongonas fixes a panic which was happening with the
combination of EFI and KHO.
- The 2 patch series "Squashfs: performance improvement and a sanity
check" from Phillip Lougher teaches squashfs's lseek() about
SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen
microbenchmark.
- Plus another 50-odd singleton patches all over the place.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN78zwAKCRDdBJ7gKXxA
jhLeAQCddTv0XtSUTrvBvmrJVUBrQQeJc+LtNopMIjfAF/WAWAEAogSVKxg+HHEB
GaVixx4zDriNzEqrqiCx9rm4l+YooQA=
=XRe0
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet
completes the removal of this legacy IDR API
- "panic: introduce panic status function family" from Jinchao Wang
provides a number of cleanups to the panic code and its various
helpers, which were rather ad-hoc and scattered all over the place
- "tools/delaytop: implement real-time keyboard interaction support"
from Fan Yu adds a few nice user-facing usability changes to the
delaytop monitoring tool
- "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos
Petrongonas fixes a panic which was happening with the combination of
EFI and KHO
- "Squashfs: performance improvement and a sanity check" from Phillip
Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere
150x speedup was measured for a well-chosen microbenchmark
- plus another 50-odd singleton patches all over the place
* tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits)
Squashfs: reject negative file sizes in squashfs_read_inode()
kallsyms: use kmalloc_array() instead of kmalloc()
MAINTAINERS: update Sibi Sankar's email address
Squashfs: add SEEK_DATA/SEEK_HOLE support
Squashfs: add additional inode sanity checking
lib/genalloc: fix device leak in of_gen_pool_get()
panic: remove CONFIG_PANIC_ON_OOPS_VALUE
ocfs2: fix double free in user_cluster_connect()
checkpatch: suppress strscpy warnings for userspace tools
cramfs: fix incorrect physical page address calculation
kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit
Squashfs: fix uninit-value in squashfs_get_parent
kho: only fill kimage if KHO is finalized
ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name()
kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths
sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock
coccinelle: platform_no_drv_owner: handle also built-in drivers
coccinelle: of_table: handle SPI device ID tables
lib/decompress: use designated initializers for struct compress_format
efi: support booting with kexec handover (KHO)
...
- The 3 patch series "mm, swap: improve cluster scan strategy" from
Kairui Song improves performance and reduces the failure rate of swap
cluster allocation.
- The 4 patch series "support large align and nid in Rust allocators"
from Vitaly Wool permits Rust allocators to set NUMA node and large
alignment when perforning slub and vmalloc reallocs.
- The 2 patch series "mm/damon/vaddr: support stat-purpose DAMOS" from
Yueyang Pan extend DAMOS_STAT's handling of the DAMON operations sets
for virtual address spaces for ops-level DAMOS filters.
- The 3 patch series "execute PROCMAP_QUERY ioctl under per-vma lock"
from Suren Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps.
- The 2 patch series "mm/mincore: minor clean up for swap cache
checking" from Kairui Song performs some cleanup in the swap code.
- The 11 patch series "mm: vm_normal_page*() improvements" from David
Hildenbrand provides code cleanup in the pagemap code.
- The 5 patch series "add persistent huge zero folio support" from
Pankaj Raghav provides a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero.
- The 3 patch series "kho: fixes and cleanups" from Mike Rapoport adds a
few touchups to the recently added Kexec Handover feature.
- The 10 patch series "mm: make mm->flags a bitmap and 64-bit on all
arches" from Lorenzo Stoakes turns mm_struct.flags into a bitmap. To
end the constant struggle with space shortage on 32-bit conflicting with
64-bit's needs.
- The 2 patch series "mm/swapfile.c and swap.h cleanup" from Chris Li
cleans up some swap code.
- The 7 patch series "selftests/mm: Fix false positives and skip
unsupported tests" from Donet Tom fixes a few things in our selftests
code.
- The 7 patch series "prctl: extend PR_SET_THP_DISABLE to only provide
THPs when advised" from David Hildenbrand "allows individual processes
to opt-out of THP=always into THP=madvise, without affecting other
workloads on the system".
It's a long story - the [1/N] changelog spells out the considerations.
- The 11 patch series "Add and use memdesc_flags_t" from Matthew Wilcox
gets us started on the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc.
- The 3 patch series "Tiny optimization for large read operations" from
Chi Zhiling improves the efficiency of the pagecache read path.
- The 5 patch series "Better split_huge_page_test result check" from Zi
Yan improves our folio splitting selftest code.
- The 2 patch series "test that rmap behaves as expected" from Wei Yang
adds some rmap selftests.
- The 3 patch series "remove write_cache_pages()" from Christoph Hellwig
removes that function and converts its two remaining callers.
- The 2 patch series "selftests/mm: uffd-stress fixes" from Dev Jain
fixes some UFFD selftests issues.
- The 3 patch series "introduce kernel file mapped folios" from Boris
Burkov introduces the concept of "kernel file pages". Using these
permits btrfs to account its metadata pages to the root cgroup, rather
than to the cgroups of random inappropriate tasks.
- The 2 patch series "mm/pageblock: improve readability of some
pageblock handling" from Wei Yang provides some readability improvements
to the page allocator code.
- The 11 patch series "mm/damon: support ARM32 with LPAE" from SeongJae
Park teaches DAMON to understand arm32 highmem.
- The 4 patch series "tools: testing: Use existing atomic.h for
vma/maple tests" from Brendan Jackman performs some code cleanups and
deduplication under tools/testing/.
- The 2 patch series "maple_tree: Fix testing for 32bit compiles" from
Liam Howlett fixes a couple of 32-bit issues in
tools/testing/radix-tree.c.
- The 2 patch series "kasan: unify kasan_enabled() and remove
arch-specific implementations" from Sabyrzhan Tasbolatov moves KASAN
arch-specific initialization code into a common arch-neutral
implementation.
- The 3 patch series "mm: remove zpool" from Johannes Weiner removes
zspool - an indirection layer which now only redirects to a single thing
(zsmalloc).
- The 2 patch series "mm: task_stack: Stack handling cleanups" from
Pasha Tatashin makes a couple of cleanups in the fork code.
- The 37 patch series "mm: remove nth_page()" from David Hildenbrand
makes rather a lot of adjustments at various nth_page() callsites,
eventually permitting the removal of that undesirable helper function.
- The 2 patch series "introduce kasan.write_only option in hw-tags" from
Yeoreum Yun creates a KASAN read-only mode for ARM, using that
architecture's memory tagging feature. It is felt that a read-only mode
KASAN is suitable for use in production systems rather than debug-only.
- The 3 patch series "mm: hugetlb: cleanup hugetlb folio allocation"
from Kefeng Wang does some tidying in the hugetlb folio allocation code.
- The 12 patch series "mm: establish const-correctness for pointer
parameters" from Max Kellermann makes quite a number of the MM API
functions more accurate about the constness of their arguments. This
was getting in the way of subsystems (in this case CEPH) when they
attempt to improving their own const/non-const accuracy.
- The 7 patch series "Cleanup free_pages() misuse" from Vishal Moola
fixes a number of code sites which were confused over when to use
free_pages() vs __free_pages().
- The 3 patch series "Add Rust abstraction for Maple Trees" from Alice
Ryhl makes the mapletree code accessible to Rust. Required by nouveau
and by its forthcoming successor: the new Rust Nova driver.
- The 2 patch series "selftests/mm: split_huge_page_test:
split_pte_mapped_thp improvements" from David Hildenbrand adds a fix and
some cleanups to the thp selftesting code.
- The 14 patch series "mm, swap: introduce swap table as swap cache
(phase I)" from Chris Li and Kairui Song is the first step along the
path to implementing "swap tables" - a new approach to swap allocation
and state tracking which is expected to yield speed and space
improvements. This patchset itself yields a 5-20% performance benefit
in some situations.
- The 3 patch series "Some ptdesc cleanups" from Matthew Wilcox utilizes
the new memdesc layer to clean up the ptdesc code a little.
- The 3 patch series "Fix va_high_addr_switch.sh test failure" from
Chunyu Hu fixes some issues in our 5-level pagetable selftesting code.
- The 2 patch series "Minor fixes for memory allocation profiling" from
Suren Baghdasaryan addresses a couple of minor issues in relatively new
memory allocation profiling feature.
- The 3 patch series "Small cleanups" from Matthew Wilcox has a few
cleanups in preparation for more memdesc work.
- The 2 patch series "mm/damon: add addr_unit for DAMON_LRU_SORT and
DAMON_RECLAIM" from Quanmin Yan makes some changes to DAMON in
furtherance of supporting arm highmem.
- The 2 patch series "selftests/mm: Add -Wunreachable-code and fix
warnings" from Muhammad Anjum adds that compiler check to selftests code
and fixes the fallout, by removing dead code.
- The 10 patch series "Improvements to Victim Process Thawing and OOM
Reaper Traversal Order" from zhongjinji makes a number of improvements
in the OOM killer: mainly thawing a more appropriate group of victim
threads so they can release resources.
- The 5 patch series "mm/damon: misc fixups and improvements for 6.18"
from SeongJae Park is a bunch of small and unrelated fixups for DAMON.
- The 7 patch series "mm/damon: define and use DAMON initialization
check function" from SeongJae Park implement reliability and
maintainability improvements to a recently-added bug fix.
- The 2 patch series "mm/damon/stat: expose auto-tuned intervals and
non-idle ages" from SeongJae Park provides additional transparency to
userspace clients of the DAMON_STAT information.
- The 2 patch series "Expand scope of khugepaged anonymous collapse"
from Dev Jain removes some constraints on khubepaged's collapsing of
anon VMAs. It also increases the success rate of MADV_COLLAPSE against
an anon vma.
- The 2 patch series "mm: do not assume file == vma->vm_file in
compat_vma_mmap_prepare()" from Lorenzo Stoakes moves us further towards
removal of file_operations.mmap(). This patchset concentrates upon
clearing up the treatment of stacked filesystems.
- The 6 patch series "mm: Improve mlock tracking for large folios" from
Kiryl Shutsemau provides some fixes and improvements to mlock's tracking
of large folios. /proc/meminfo's "Mlocked" field became more accurate.
- The 2 patch series "mm/ksm: Fix incorrect accounting of KSM counters
during fork" from Donet Tom fixes several user-visible KSM stats
inaccuracies across forks and adds selftest code to verify these
counters.
- The 2 patch series "mm_slot: fix the usage of mm_slot_entry" from Wei
Yang addresses some potential but presently benign issues in KSM's
mm_slot handling.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaN3cywAKCRDdBJ7gKXxA
jtaPAQDmIuIu7+XnVUK5V11hsQ/5QtsUeLHV3OsAn4yW5/3dEQD/UddRU08ePN+1
2VRB0EwkLAdfMWW7TfiNZ+yhuoiL/AA=
=4mhY
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmja74IbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiacR4H/04aBsr7LZnTJVeZLQwK
HKoOwXBqiQyqPdjKXGKnp7Mh9gRp2W3V11VsYTuDJNUS+Vz5YXW0z8cRnUfZ3SYs
l+GZC3vZeAy2EVJE1U6Mb673hU8vziI80IO2q/tGzaj9a+wC3L0lemc+YFQTwG+u
pMtt8zU2vHRjgkx8TNNqJBBOLLDV+RzIl8pqXVnh4eju6x6ZdreGnjXaePYMdjG0
fXLf9XwIeWREqbfeOCEOB50Ts71kkdiOeskwnJyfCTDT8WTu3zC/dICqfh66e3Gg
8hQKvMsuKpm/FwbtgdB0WvaDjENH6PmY+ubLYVxwvNpcsTSqfe0IYGm+HpUP+TPf
m+Y=
=w+JL
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- A new layer for caching objects for allocation and free via percpu
arrays called sheaves.
The aim is to combine the good parts of SLAB (lower-overhead and
simpler percpu caching, compared to SLUB) without the past issues
with arrays for freeing remote NUMA node objects and their flushing.
It also allows more efficient kfree_rcu(), and cheaper object
preallocations for cases where the exact number of objects is
unknown, but an upper bound is.
Currently VMAs and maple nodes are using this new caching, with a
plan to enable it for all caches and remove the complex SLUB fastpath
based on cpu (partial) slabs and this_cpu_cmpxchg_double().
(Vlastimil Babka, with Liam Howlett and Pedro Falcato for the maple
tree changes)
- Re-entrant kmalloc_nolock(), which allows opportunistic allocations
from NMI and tracing/kprobe contexts.
Building on prior page allocator and memcg changes, it will result in
removing BPF-specific caches on top of slab (Alexei Starovoitov)
- Various fixes and cleanups. (Kuan-Wei Chiu, Matthew Wilcox, Suren
Baghdasaryan, Ye Liu)
* tag 'slab-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (40 commits)
slab: Introduce kmalloc_nolock() and kfree_nolock().
slab: Reuse first bit for OBJEXTS_ALLOC_FAIL
slab: Make slub local_(try)lock more precise for LOCKDEP
mm: Introduce alloc_frozen_pages_nolock()
mm: Allow GFP_ACCOUNT to be used in alloc_pages_nolock().
locking/local_lock: Introduce local_lock_is_locked().
maple_tree: Convert forking to use the sheaf interface
maple_tree: Add single node allocation support to maple state
maple_tree: Prefilled sheaf conversion and testing
tools/testing: Add support for prefilled slab sheafs
maple_tree: Replace mt_free_one() with kfree()
maple_tree: Use kfree_rcu in ma_free_rcu
testing/radix-tree/maple: Hack around kfree_rcu not existing
tools/testing: include maple-shim.c in maple.c
maple_tree: use percpu sheaves for maple_node_cache
mm, vma: use percpu sheaves for vm_area_struct cache
tools/testing: Add support for changes to slab for sheaves
slab: allow NUMA restricted allocations to use percpu sheaves
tools/testing/vma: Implement vm_refcnt reset
slab: skip percpu sheaves for remote object freeing
...
-----BEGIN PGP SIGNATURE-----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=kOmc
-----END PGP SIGNATURE-----
Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module.
- Bump the minimum version of LLVM for building the kernel to 15.0.0.
- Upgrade several userspace API checks in headers_check.pl to errors.
- Unify and consolidate CONFIG_WERROR / W=e handling.
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e.
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs).
- Enable -Werror unconditionally when building host programs
(hostprogs).
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS.
- Miscellaneous small changes to scripts and configuration files.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaNrp6QAKCRAdayaRccAa
ljxRAP4hYocKXeWsiJzkTB199P4QUGWf220a9elBmtdJEed07gD/VBnCbSOxG3RO
vS8qbJHwxUFL7a+mDV8RIVXSt99NpAg=
=psG/
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nathan Chancellor:
- Extend modules.builtin.modinfo to include module aliases from
MODULE_DEVICE_TABLE for builtin modules so that userspace tools (such
as kmod) can verify that a particular module alias will be handled by
a builtin module
- Bump the minimum version of LLVM for building the kernel to 15.0.0
- Upgrade several userspace API checks in headers_check.pl to errors
- Unify and consolidate CONFIG_WERROR / W=e handling
- Turn assembler and linker warnings into errors with CONFIG_WERROR /
W=e
- Respect CONFIG_WERROR / W=e when building userspace programs
(userprogs)
- Enable -Werror unconditionally when building host programs
(hostprogs)
- Support copy_file_range() and data segment alignment in gen_init_cpio
to improve performance on filesystems that support reflinks such as
btrfs and XFS
- Miscellaneous small changes to scripts and configuration files
* tag 'kbuild-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (47 commits)
modpost: Initialize builtin_modname to stop SIGSEGVs
Documentation: kbuild: note CONFIG_DEBUG_EFI in reproducible builds
kbuild: vmlinux.unstripped should always depend on .vmlinux.export.o
modpost: Create modalias for builtin modules
modpost: Add modname to mod_device_table alias
scsi: Always define blogic_pci_tbl structure
kbuild: extract modules.builtin.modinfo from vmlinux.unstripped
kbuild: keep .modinfo section in vmlinux.unstripped
kbuild: always create intermediate vmlinux.unstripped
s390: vmlinux.lds.S: Reorder sections
KMSAN: Remove tautological checks
objtool: Drop noinstr hack for KCSAN_WEAK_MEMORY
lib/Kconfig.debug: Drop CLANG_VERSION check from DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
riscv: Remove ld.lld version checks from many TOOLCHAIN_HAS configs
riscv: Unconditionally use linker relaxation
riscv: Remove version check for LTO_CLANG selects
powerpc: Drop unnecessary initializations in __copy_inst_from_kernel_nofault()
mips: Unconditionally select ARCH_HAS_CURRENT_STACK_POINTER
arm64: Remove tautological LLVM Kconfig conditions
ARM: Clean up definition of ARM_HAS_GROUP_RELOCS
...
- A seven patch series adds a new parameterized test features
KUnit parameterized tests currently support two primary methods for
getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
These limitations are fixed with a parameterized test method.
- Fixes issues in kunit build artifacts cleanup,
- Fixes parsing skipped test problem in kselftest framework,
- Enables PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
-----BEGIN PGP SIGNATURE-----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=VfHu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
- Further consolidation of the VDSO infrastructure and the common data
store.
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmjaUJgTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoT5VD/9l+TP42vJzwygPArefVM9QijAc4k+g
iptaz5M+Lhk0BlwMUu502Tp1zcwGq5529LlE2P72DuYoZRtZKSFCGES2mye0JiAs
A5Vk8d1zicg3IIGjYgw39shA9ghzuzV3gZdgHVqQ6024uSeKxUY3SqF156GGfPFG
azXWDV7i4RGQvKLm2ye8m7JNYCE3P9f8Wh+GvPaq7qBlW1MsMCWC4FP5qu4iStf3
mol9uA/EM2zSDwkpIpq6P5L2TpIH1dGDNGxVf/HG3J16UhNXzzXv/rxuKHKPNGWm
MQZ8WdPjF+uwdUsNXaImC6aCE0hoQ1Ga7GE2YA3pMQYfySeiJ/fA5I1KfhlUCiHD
oUgnb6PQfZjaBDrIODKcrFHAYc5pTOyJXnJ6q1Lc1yrOfoVcIpMaRXHO/phCeuwI
61gfb9ggbFEH/7cL26Z9XGSqh4BDCKVP5Z+y98OnNEzV74ScpX13/szB3VgdN6LW
tmTOeMPYCo4FQoPw8OV1xkeYOKD2JyqH+garnxDZNFjaVaeUkzlAMKz+1JUjxRZj
UpUhZ8y5KFVjgKkqZHxhucr9cnwV/xd4n+IzZeG4l6XZp4VyirG+5QpAikGYe+Jq
WFU4Ao1xvevyizrJEhoGJKznwtrNrsy6AQ+wLQxYiRR4aTnng8n9T/ry2DVvhJf8
diYWxuRTR7KMxg==
=i3UB
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which onoly removed it from the core but failed to invoke
the actual device driver shutdown callback. This keeps the timer
active, which prevents power savings and causes pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is a
private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide better
information for analysis.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=A9Tu
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
First set of RISC-V updates for the v6.18 merge window, including:
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather than
open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if they
are available
- The ability to identity and communicate to userspace the presence of a
MIPS P8700-specific ISA extension, and to leverage its MIPS-specific PAUSE
implementation in cpu_relax()
- Several other miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=nK3D
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley
- Replacement of __ASSEMBLY__ with __ASSEMBLER__ in header files (other
architectures have already merged this type of cleanup)
- The introduction of ioremap_wc() for RISC-V
- Cleanup of the RISC-V kprobes code to use mostly-extant macros rather
than open code
- A RISC-V kprobes unit test
- An architecture-specific endianness swap macro set implementation,
leveraging some dedicated RISC-V instructions for this purpose if
they are available
- The ability to identity and communicate to userspace the presence
of a MIPS P8700-specific ISA extension, and to leverage its
MIPS-specific PAUSE implementation in cpu_relax()
- Several other miscellaneous cleanups
* tag 'riscv-for-linus-6.18-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (39 commits)
riscv: errata: Fix the PAUSE Opcode for MIPS P8700
riscv: hwprobe: Document MIPS xmipsexectl vendor extension
riscv: hwprobe: Add MIPS vendor extension probing
riscv: Add xmipsexectl instructions
riscv: Add xmipsexectl as a vendor extension
dt-bindings: riscv: Add xmipsexectl ISA extension description
riscv: cpufeature: add validation for zfa, zfh and zfhmin
perf: riscv: skip empty batches in counter start
selftests: riscv: Add README for RISC-V KSelfTest
riscv: sbi: Switch to new sys-off handler API
riscv: Move vendor errata definitions to new header
RISC-V: ACPI: enable parsing the BGRT table
riscv: Enable ARCH_HAVE_NMI_SAFE_CMPXCHG
riscv: pi: use 'targets' instead of extra-y in Makefile
riscv: introduce asm/swab.h
riscv: mmap(): use unsigned offset type in riscv_sys_mmap
drivers/perf: riscv: Remove redundant ternary operators
riscv: mm: Use mmu-type from FDT to limit SATP mode
riscv: mm: Return intended SATP mode for noXlvl options
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
...
