Use separate flag to mark a job timeout as a reason
of starting context_abort_work. This allows to distinguish
engine reset reason and clearly adjust reset procedure flow.
The flag is cleared in ivpu_prepare_for_reset(), which every
recovery and suspend path already funnels through, so that the
state is clean after recovery.
Cc: stable@vger.kernel.org # v7.1+
Fixes: ade00a6c90 ("accel/ivpu: Perform engine reset instead of device recovery on TDR")
Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com>
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260914084301.894028-1-karol.wachowski@linux.intel.com
Two functions in the SVSM vTPM guest implementation do not disable
preemption when fetching the SVSM Calling Area Address (CAA).
The SVSM CAA is a per-CPU structure. When a thread is preempted and migrated
to a different CPU after fetching the per-CPU CAA, the SVSM call will execute
on the new CPU with the original CPU's CAA. Which is wrong.
Move the CAA fetching operation inside svsm_perform_call_protocol() which
disables interrupts around the SVSM call and thus runs preemption-safe.
Fixes: 770de678bc ("x86/sev: Add SVSM vTPM probe/send_command functions")
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/a5bc0d4a2c462a0089109e145c21626b244b2ff0.1789345277.git.huibo.wang@amd.com
Core:
- hci_conn: fix CIS hold ownership on reuse
- hci_sock: reject out-of-range OCF values
- hci_sock: validate event length before filtering
- L2CAP: validate frame length before control and FCS access
- RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
- RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame()
- ISO: release unused CIS holds after channel attach
- ISO: balance the parent hold in hci_bind_bis()
- SMP: reject Security Request over BR/EDR
- MGMT: fix race in read_unconf_index_list()
- MGMT: Dequeue pending mesh_send_sync entries on cancel
- BNEP: fix out-of-bounds reads on short RX/TX frames and control fallthrough
Drivers:
- btintel_pcie: validate device-supplied DMA indices
- btnxpuart: Fix skb leak in nxp_process_fw_dump()
-----BEGIN PGP SIGNATURE-----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=cLTc
-----END PGP SIGNATURE-----
Merge tag 'for-net-2026-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
Core:
- hci_conn: fix CIS hold ownership on reuse
- hci_sock: reject out-of-range OCF values
- hci_sock: validate event length before filtering
- L2CAP: validate frame length before control and FCS access
- RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
- RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame()
- ISO: release unused CIS holds after channel attach
- ISO: balance the parent hold in hci_bind_bis()
- SMP: reject Security Request over BR/EDR
- MGMT: fix race in read_unconf_index_list()
- MGMT: Dequeue pending mesh_send_sync entries on cancel
- BNEP: fix out-of-bounds reads on short RX/TX frames and control fallthrough
Drivers:
- btintel_pcie: validate device-supplied DMA indices
- btnxpuart: Fix skb leak in nxp_process_fw_dump()
* tag 'for-net-2026-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame()
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
Bluetooth: btintel_pcie: validate device-supplied DMA indices
Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough
Bluetooth: mgmt: fix race in read_unconf_index_list()
Bluetooth: L2CAP: validate frame length before control and FCS access
Bluetooth: ISO: balance the parent hold in hci_bind_bis()
Bluetooth: hci_sock: validate event length before filtering
Bluetooth: hci_sock: reject out-of-range OCF values
Bluetooth: ISO: release unused CIS holds after channel attach
Bluetooth: hci_conn: fix CIS hold ownership on reuse
Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel
Bluetooth: btnxpuart: Fix skb leak in nxp_process_fw_dump()
Bluetooth: SMP: reject Security Request over BR/EDR
====================
Link: https://patch.msgid.link/20260921135807.3459373-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check()
detect an uncached route by list_empty(&rt->dst.rt_uncached),
which replaced the static DST_NOCACHE flag check in commit
a4c2fd7f78 ("net: remove DST_NOCACHE flag").
When a device is unregistered, rt6_uncached_list_flush_dev()
unlinks uncached routes tied to the device from rt6_uncached_list.
Previously, they were moved to another list with list_move()
(__list_del_entry() + list_add()), and since commit 98aa546af5
("inet: remove (struct uncached_list)->quarantine"), the routes
are just unlinked with list_del_init().
If list_del_init() runs concurrently, list_empty() evaluates to
true; ip6_route_output_flags() calls dst_hold_safe() incorrectly
and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus
dev tied via rt->from as well.
The same race is partially fixed by commit 9a6f0c4d57 ("dst:
fix races in rt6_uncached_list_del() and rt_del_uncached_list()").
Let's check rt6->dst.rt_uncached_list instead.
Note that IPv4 does not have the same issue.
Fixes: 98aa546af5 ("inet: remove (struct uncached_list)->quarantine")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@kylinos.cn>
Reviewed-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260920191558.2990636-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smb2_compound_op() saves the result from compound_send_recv() in
tmp_rc. For SMB2_OP_OPEN_QUERY it then parses the CREATE contexts, but
the final assignment of rc from tmp_rc discards a parsing error. A
malformed create-context response can therefore be reported as
successful to smb2_query_path_info().
Keep a create-context parsing error in tmp_rc so it survives per-command
response processing and is returned to the caller.
Fixes: b07687edee ("cifs: Improve SMB2+ stat() to work also without FILE_READ_ATTRIBUTES")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transfer them only after synchronization of
the processed responses, so the release path can inspect successful
CREATE responses and queue SMB2_close() after a later failure. Account for
a remote open only after the close work is allocated and before it is
queued, since the caller has not yet updated num_remote_opens. Mark the
create+close compound used by smb2_unlink() so it is not closed again.
Non-CREATE responses and compounds that already include a close keep their
existing behavior.
Fixes: e0bba0b854 ("cifs: add compound_send_recv()")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If
the CREATE succeeds but a later command returns an error, the function
must retain the CREATE FID so common cleanup can issue SMB2_close(). It
also must not treat a response error as a valid CREATE.
Validate the CREATE response before using its fields, record the FIDs, and
mark the handle open before handling errors from later compound commands.
Move the -EREMCHG reconnect handling before response validation so a
missing response does not hide the reconnect request. Count the handle
when it is marked open; confirmed close responses decrement the counter,
while existing close retry behavior remains best effort on transport
failures.
Fixes: b0f6df737a ("cifs: cache FILE_ALL_INFO for the shared root handle")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count.
Fixes: af1689a9b7 ("smb: client: fix potential OOBs in smb2_parse_contexts()")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
parse_posix_ctxt() reads the fixed nlink, reparse_tag, and mode fields
before checking that the POSIX create context contains them. A short
context can pass the generic checks and still make these fixed-width
reads run past its declared data.
The current in-tree smb2_open_file() path passes a NULL posix pointer,
so this handler is not reached on the ordinary open path. Still require
the POSIX data to cover all three fields before reading them because the
helper performs those unguarded reads. Keep the existing soft-failure
behavior so malformed optional metadata does not fail the open.
Fixes: 69dda3059e ("cifs: add SMB2_open() arg to return POSIX data")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelated in-bounds data, while a short DataLength was still accepted.
Limit each context to its Next value, reject offsets before the context
header, and reject malformed chains. Bound the name range by the current
context and do not dispatch a known handler when DataLength is zero. Read
the QFid DiskFileId only when the context data covers that field. Parse the
lease context from DataOffset and require DataLength to match the v1 or v2
lease_context size used by ksmbd. A size mismatch skips lease parsing
without failing the open.
Fixes: b8c32dbb0d ("CIFS: Request SMB2.1 leases")
Fixes: f047390a09 ("CIFS: Add create lease v2 context for SMB3")
Fixes: 89a5bfa350 ("smb3: optimize open to not send query file internal info")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field.
Fixes: ca7992f52c ("net/mlx5e: Properly match IPsec subnet addresses")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260917115542.177675-1-parri.andrea@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 8d75c338f0 ("sysctl: remove CONFIG_PROC_SYSCTL, it just mirrors
CONFIG_SYSCTL") renamed CONFIG_PROC_SYSCTL to CONFIG_SYSCTL in place,
which left the entry out of alphabetical order in the net and
packetdrill configs. The netdev CI check for sorted selftest configs
now fails for every patch that touches either file.
Fixes: 8d75c338f0 ("sysctl: remove CONFIG_PROC_SYSCTL, it just mirrors CONFIG_SYSCTL")
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Reviewed-by: Joel Granados <joel.granados@kernel.org>
Link: https://patch.msgid.link/20260918-selftests-net-config-sort-v1-1-968ea6e8c1b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The receive fixup subtracts the Ethernet CRC from the reported packet
length, but compares that payload length against the whole remaining
receive buffer. The following copy starts after the three-byte header,
and the cursor advance consumes both that header and the four-byte CRC.
Require the payload to fit after SR_RX_OVERHEAD before copying it or
advancing to the next packet. The loop already ensures that the
remaining buffer is larger than the overhead, so the subtraction is
safe.
The issue was found by our static-analysis tool.
Fixes: c9b37458e9 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support")
Reviewed-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Tested-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Pengpeng Hou <hppiscas@163.com>
Link: https://patch.msgid.link/20260920034745.18468-1-hppiscas@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dpll_pin_ref_sync_state_set() looks up the reference sync pin in the
pin->ref_sync_pins xarray, which is keyed by the sync pin's id (see
dpll_pin_ref_sync_pair_add() using xa_insert() with ref_sync_pin->id).
The pin id to operate on is supplied by userspace via DPLL_A_PIN_ID.
The lookup however used xa_find() with a ULONG_MAX limit, which returns
the first present entry with an index greater than or equal to the
requested id, not the entry stored exactly at that id. If userspace
passes an id that is not paired as a reference sync pin, but another
pin with a higher id is present in the xarray, xa_find() silently
returns that wrong pin and the subsequent ref_sync_set() operates on
it. The request only fails when the given id is larger than every
present key.
Use xa_load() for an exact-key lookup instead, mirroring the deletion
path in dpll_pin_ref_sync_pair_del().
Fixes: 58256a26bf ("dpll: add reference sync get/set")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260917143736.526221-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Removing the legacy ioctl fallback made both hwtstamp NDOs mandatory. A
device that only timestamps in its PHY implements neither, so
SIOCSHWTSTAMP fails with EOPNOTSUPP before anything looks at the PHY and
PTP stops working there.
The check only ever picked the legacy path. That path is gone, so drop it
and test where the NDOs are actually called.
SIOCGHWTSTAMP is new here, not restored. The old path went through
phy_mii_ioctl(), which only handled SIOCSHWTSTAMP.
Such a device now returns -ENODEV while absent instead of -EOPNOTSUPP,
like the ones that do implement the NDOs.
Fixes: 5062245a5a ("net: remove legacy way to get/set HW timestamp config")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260918095540.34286-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before the cited commit, fib6_nh_flush_exceptions() always set
from->exception_bucket_flushed = 1 under rt6_exception_lock to
prevent rt6_insert_exception() from inserting a new exception
for a dying fib6_info.
The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED
bit stored in nh->rt6i_exception_bucket.
The problem is that now the bit is only set when the bucket
is not NULL and fib6_nh_flush_exceptions() is called from
fib6_nh_release() after fib6_ref has already reached zero.
If rt6_insert_exception() is called while the target fib6_info
is being removed via fib6_purge_rt(), a new exception could be
created successfully because rt6_flush_exceptions() no longer
sets the bit.
This creates a reference cycle between the fib6_info and the
exception route, leaking the fib6_info, its nexthop device,
and all per-CPU routes in fib6_nh->rt6i_pcpu, which stalls netdev
unregistration.
[ 34.680602] unregister_netdevice: waiting for gre6 to become free. Usage count = 68
[ 44.920675] unregister_netdevice: waiting for gre6 to become free. Usage count = 68
[ 55.176582] unregister_netdevice: waiting for gre6 to become free. Usage count = 68
Let's call fib6_drop_pcpu_from() before rt6_flush_exceptions(),
to set fib6_destroying before rt6_exception_lock, and check
f6i->fib6_destroying in rt6_insert_exception().
Note that FIB6_EXCEPTION_BUCKET_FLUSHED logic is dead and
we can clean it up in net-next.
Fixes: cc5c073a69 ("ipv6: Move exception bucket to fib6_nh")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260918082209.2853582-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original code used DMA_ATTR_FORCE_CONTIGUOUS, which could exhaust
the CMA pool when a large number of VFs were requested.
Fix this by switching to the DMA streaming API. This is equivalent on
Octeon platforms, which provide full I/O coherency via the SMMU.
Cc: Leon Romanovsky <leon@kernel.org>
Fixes: 73d33dbc07 ("octeontx2-af: Use DMA_ATTR_FORCE_CONTIGUOUS attribute in DMA alloc")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/20260916022111.1083017-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RfSQ
-----END PGP SIGNATURE-----
Merge tag 'nf-26-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net, they are:
1) Set on HW_DEAD after HW_PENDING is cleared in the flowtable offload
to ensure GC does not zap it, from Jérémy Jean.
2) Hold the nfnetlink_queue mutex while removing the queue instance
from the netlink notifier that handles NETLINK_URELEASE to fix a
possible race with the UNBIND command. From Florian Westphal.
3) Reject route with NULL rt6i_idev in ip6t_rpfilter. From Weiming Shi.
4) Reject rtinfo->addrnr set to zero from ip6t_rt .checkentry path.
This also fortifies the datapath loop as per Florian's request.
From Luxiao Xu.
5) Fix checksuming in nft_synproxy for IPv6, from Karl Mehltretter.
6) Revalidate ihl before calling icmp_send() in IPVS,
from Julian Anastasov.
7) Fix suspicious RCU usage splat in ctnetlink with expectations.
8) Check for expired catchall elements in the insert and deactivate
path. From Aohan Mei.
* tag 'nf-26-09-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: skip expired catchall elements on insert and delete
netfilter: ctnetlink: fix suspicious RCU usage in expect_iter_name
ipvs: revalidate ihl before icmp_send
netfilter: nft_synproxy: use the family-aware checksum helper
netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read
netfilter: ip6t_rpfilter: reject routes without inet6_dev
netfilter: nfnetlink_queue: hold nfnl mutex in event notifier
netfilter: flowtable: publish HW_DEAD after worker is done
====================
Link: https://patch.msgid.link/20260918112844.194503-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xu Yunxiang says:
====================
bpf: Reject non-negative stack object offsets
Reject non-negative offsets before converting a stack object address to a
stack slot index. Add a regression test for iterator destruction through
fp+0.
Changes in v2:
- Split the kernel change and selftest as requested by Andrii.
- Rebase onto bpf/master at a11212910c.
- Keep the original code and test changes unchanged and retain Sun Jian's
Reviewed-by on both parts.
v1: https://lore.kernel.org/bpf/20260911084314.3481637-1-xyx2021@mail.ustc.edu.cn/
Split request: https://lore.kernel.org/bpf/CAEf4BzbYzt-Riekpc-A=MfQft9ZELwSDSE8kkQO1ZOyR3O_FAg@mail.gmail.com/
Validation on this exact candidate with a matching bpf_testmod:
- W=1 verifier, full kernel/modules, changed BPF objects and test_progs
builds passed.
- iters: 1/97 passed; 0 skipped.
- dynptr: 2/132 passed; 0 skipped.
- irq: 1/33 passed; 0 skipped.
- res_spin_lock: 3/14 passed; 1 skipped.
- file_reader: 1/8 passed; 0 skipped.
- kmem_cache_iter: 1/3 passed; 0 skipped.
- dmabuf_iter: 1/4 passed; 0 skipped.
No selected test failed. The VM ran with panic_on_warn and panic_on_oops;
no kernel WARN, Oops or panic was found.
res_spin_lock_stress skips because the VM has no hardware PMU.
Annotated verifier tests check load outcomes and diagnostics. The full
unfiltered suite, sanitizer configurations and architecture matrix were
not run.
Please queue this fix for stable after it reaches the BPF tree.
====================
Link: https://patch.msgid.link/20260920210423.345636-1-xyx2021@mail.ustc.edu.cn
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a verifier regression test that initializes a numeric iterator at fp-8
and attempts to destroy it through fp+0. The verifier must reject the
non-negative offset instead of treating it as the initialized stack slot.
Check the offset diagnostic to ensure rejection happens at the stack
object address check. The numeric iterator destroy operation is a no-op;
this test checks verifier rejection and does not run the program.
Signed-off-by: Xu Yunxiang <xyx2021@mail.ustc.edu.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/bpf/20260920210423.345636-3-xyx2021@mail.ustc.edu.cn
bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division,
which truncates toward zero. For off == 0, this produces spi 0, the
same index used by the valid stack slot at fp-8.
stack_slot_obj_get_spi() currently checks alignment and the resulting
spi bounds, but does not reject the non-negative offset itself. It can
therefore validate a PTR_TO_STACK register holding fp+0 against an
iterator stored at fp-8 even though the runtime receives the actual fp+0
pointer. An effectful iterator kfunc can then interpret memory outside
the BPF stack as iterator state.
Reject non-negative offsets before converting the offset to an spi. All
valid stack objects begin at a negative offset from the frame pointer.
Fixes: 06accc8779 ("bpf: add support for open-coded iterator loops")
Signed-off-by: Xu Yunxiang <xyx2021@mail.ustc.edu.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Link: https://lore.kernel.org/bpf/20260920210423.345636-2-xyx2021@mail.ustc.edu.cn
devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ.
Fixes: 0942a71e43 ("rtc: add support for spear rtc")
Cc: stable@vger.kernel.org
Assisted-by: Codex:GPT-5
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Link: https://patch.msgid.link/20260902080318.3498434-1-runyu.xiao@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For 64-bit Linux kernels, increase the default kernel stack size
(THREAD_SIZE_ORDER) to 32 kB, in order to avoid kernel crashes which have been
triggered recently when building the debian vtk9 package with gcc 17:
stackcheck: kworker/u128:0 will most likely overflow kernel stack (sp:179a83af0, stk bottom-top:179a80000-179a84000)
Kernel panic - not syncing: low stack detected by irq handler - check messages
CPU: 2 UID: 0 PID: 30760 Comm: kworker/u128:0 Tainted: G W 6.18.46-dirty #1 NONE
Tainted: [W]=WARN
Hardware name: 9000/800/rp3440
Workqueue: writeback wb_workfn (flush-259:0)
Backtrace:
[<000000004022f050>] show_stack+0x70/0x90
[<000000004022378c>] dump_stack_lvl+0x124/0x190
[<000000004022382c>] dump_stack+0x34/0x48
[<000000004020212c>] vpanic+0x204/0x648
[<00000000402025c4>] panic+0x54/0x58
[<0000000040232230>] do_cpu_irq_mask+0x3f8/0x440
[<0000000040227070>] intr_return+0x0/0xc
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # v6.18+
devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight
into clk_get_rate() without checking it for an error first, unlike the
"rtc" clock a few lines above which is correctly checked with
IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error
pointer:
if (!clk)
return 0;
...
rate = clk_core_get_rate_recalc(clk->core);
so if devm_clk_get() ever returns an error pointer here (for example
ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the
clkcfg clock-provider this RTC depends on has not registered its
clocks yet by the time this driver probes), clk_get_rate() dereferences
that error pointer instead of returning 0, crashing instead of letting
probe defer.
Capture the clock in the existing 'clk' local and check it with
IS_ERR() before calling clk_get_rate(), matching the handling already
used for the "rtc" clock in this same function.
Signed-off-by: Manush Prajwal <manushprajwal555@gmail.com>
Fixes: 0b31d70359 ("rtc: Add driver for Microchip PolarFire SoC")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/6a9d4b02.7d74b517.206c4c.75f8@mx.google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
ac100_rtc_register_clks() registers the RTC-32k clock with
clk_hw_register_fixed_rate() and the clock provider with
of_clk_add_hw_provider(). Neither is device managed, and both are
released only from ac100_rtc_remove(). The driver core does not call
remove() when probe() fails: really_probe() reaches probe_failed below
the device_remove() call and goes straight to releasing the device's
managed resources.
ac100_rtc_probe() ends with
return devm_rtc_register_device(chip->rtc);
so if that fails after the clocks have been registered, the provider is
left on the global of_clk_providers list holding chip->clk_data, which
was allocated with devm_kzalloc() and is freed while probe() unwinds. A
later lookup on this device tree node then reads freed memory in
of_clk_hw_onecell_get(). Consumers that do exactly that exist in tree:
the wifi power sequence nodes on sun8i-a83t-bananapi-m3 and
sun8i-a83t-cubietruck-plus take <&ac100_rtc 1>, and the sun9i-a80 boards
route osc32k through <&ac100_rtc 0>. The window is narrow, as
devm_rtc_register_device() can only fail with -ENOMEM here, but the
provider is left dangling whenever it does.
The RTC-32k clock is leaked on the same path. Since clk_core_lookup()
searches a global list that is not scoped per device, __clk_register()
rejects the duplicate name with -EEXIST, so the leak also makes a later
probe of the same device fail.
The error path that returns -EINVAL when the ADDA 4M parent clock cannot
be found leaks the RTC-32k clock in the same way. No provider has been
registered at that point, so that one is a leak rather than a
use-after-free.
Register both with devm_clk_hw_register_fixed_rate() and
devm_of_clk_add_hw_provider() so that they are released whenever the
device goes away, on a failed probe as well as on unbind. Devres
releases in reverse order of acquisition, so the provider is removed
before chip->clk_data is freed, and the clkout children are now
unregistered before their parent rather than after it.
ac100_rtc_unregister_clks() and the remove callback then have nothing
left to do and are removed.
Fixes: d00a18a42c ("rtc: ac100: Add RTC driver for X-Powers AC100")
Reported-by: Sashiko AI <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-rtc/20260905184936.155E11F00A3A@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Aamir Ahmed <elb12345@hotmail.co.uk>
Link: https://patch.msgid.link/AS8P251MB0001A489CC45A591ABBB9BDCC8B42@AS8P251MB0001.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Commit f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Assisted-by: LLM
Signed-off-by: Aamir Ahmed <elb12345@hotmail.co.uk>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/AS8P251MB00013E724A77A355668B6CCEC8B42@AS8P251MB0001.EURP251.PROD.OUTLOOK.COM
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Restore the EFI RTC alarm functionality (read_alarm/set_alarm and
procfs output) that was removed by commit 18a3510bc8 ("rtc: efi:
Remove wakeup functionality").
The removal was motivated by the observation that many EFI platforms
lack RTC wakeup support while also omitting the RT_PROP table, causing
the wakeup capability to be incorrectly advertised. While that is
true, removing the feature entirely also breaks platforms where the
wakeup runtime service actually works.
On CIX SoCs, the RTC is an I2C device owned by firmware, and in the
ACPI boot configuration the I2C bus it sits on is not exposed to the
OS, so the EFI runtime services are the only way Linux can access
the RTC at all. Both Linux and Windows use this same interface by
design, so the RTC state is consistent across the operating systems
installed on the machine, and Windows relies on the EFI wakeup
services for its own RTC alarm support.
With the alarm support removed from rtc-efi, Linux loses the
equivalent capability entirely on these platforms: rtcwake fails
for both suspend-to-RAM and power-off wakeup, as there is no other
path to program the RTC alarm. This is a real product requirement
that CIX customers have explicitly requested, not a hypothetical
use case.
To avoid exposing a broken alarm on firmware that does not implement
the wakeup runtime services, probe the capability at ->probe() time by
actually calling GetWakeupTime() -- if it fails, clear RTC_FEATURE_ALARM
and the device behaves as before the removal.
Also set RTC_FEATURE_ALARM_WAKEUP_ONLY since EFI wakeup time is a
wakeup-only alarm, not a periodic/update interrupt source.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Feng Tang <feng.tang@linux.alibaba.com>
Reviewed-by: Fugang Duan <fugang.duan@cixtech.com>
Signed-off-by: Johnny.Fan <Johnny.Fan@cixtech.com>
Link: https://patch.msgid.link/20260831140014.839222-1-johnny.fan@cixtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The struct rtc_wkalrm has padding holes after the 'pending' member.
When returned to userspace via the RTC_WKALRM_RD ioctl, uninitialized
kernel stack data residing in these holes may be leaked.
Zero-initialize the struct at declaration to eliminate this information
leak risk.
Fixes smatch warnings:
- drivers/rtc/dev.c:392 rtc_dev_ioctl() warn: check that 'alarm' doesn't
leak information (struct has a hole after 'pending')
Fixes: 36e14f5fdf ("rtc: rename core files")
Assisted-by: smatch:2.0 [static analysis]
Signed-off-by: Liu Dalin <liudalin@kylinsec.com.cn>
Link: https://patch.msgid.link/B28B7DE18F3A9447+20260827015444.3314227-1-liudalin@kylinsec.com.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Georgios Karantzas <gck.kara@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260911001143.4507-1-gck.kara@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath9k_wmi_rsp_callback() removes the validated WMI header and copies
the number of bytes expected by the waiting command into its response
buffer. A device response shorter than that expectation can therefore
be read beyond the skb payload.
Record -EMSGSIZE for a short response, complete the waiter, and return
the stored status from the command path. This also prevents callers from
consuming stale response bytes as a successful reply.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Assisted-by: LLM
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260814075837.20005-1-pengpeng@iscas.ac.cn
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The ath9k driver has a couple of guards against the RX path running
until device initialisation has completed. However, they are problematic
for several reasons:
- They use smp_wmb() paired with a data_race() annotation, instead of
the idiomatic smp_store_release()/smp_load_acquire() pair.
- The guard in ath9k_wmi_event_tasklet() is weirdly late in the
function.
- There are two of them when there's really no reason the rx init gets
to run before the whole initialisation is complete.
Consolidate the guards on the single ath9k_htc_priv->initialized
variable and use smp_store_release()/smp_load_acquire() to access it.
Move the store into ath9k_init_device() to make sure it's set in all
paths in the driver.
Fixes: 24355fcb0d ("wifi: ath9k: delay all of ath9k_wmi_event_tasklet() until init is complete")
Fixes: b0ec7e55fc ("ath9k_htc: fix NULL pointer dereference at ath9k_htc_rxep()")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260908170520.112946-1-toke@redhat.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
When (multiple) hw restart occurs, we end up in a situation where we
cannot accept new stations / mesh peers. This seems to be the
'num_stations' in 'struct ath11k' that did not get reset properly in
this case. In ath11k_mac_op_start(), it was indeed the only accounting var
that did not get reset so let's clear it too.
This avoids problems like those:
[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
[1248828.088115] Call trace:
[1248828.088116] ieee80211_reconfig_stations+0x98/0xc0 (P)
[1248828.088119] ieee80211_reconfig+0x774/0x1438
[1248828.088123] ieee80211_restart_work+0x10c/0x178
[1248828.088127] process_one_work+0x178/0x3c0
[1248828.088130] worker_thread+0x280/0x440
[1248828.088133] kthread+0xe0/0xf8
[1248828.088137] ret_from_fork+0x10/0x20
[1248828.088141] ---[ end trace 0000000000000000 ]---
[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: xx:xx:xx:xx:xx:xx for VDEV: 1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-01977-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260812-num-station-v3-1-871d20e043f6@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
io_fill_cqe_aux() only clears big_cqe if cqe32 is set, which is only the
case for CQE_MIXED. On a CQE32 ring every CQE is 32b, and the extra 16b
are left holding whatever was in that slot before.
Clear it for CQE32 rings as well, like it was before CQE_MIXED support
was added.
Fixes: e26dca67fd ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
Link: https://patch.msgid.link/20260919203516.2581409-1-benquike@gmail.com
[axboe: split from Hui's original patch, edited commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On CQE32 rings, len is in units of 32b CQEs when io_cqe_cache_refill()
checks for free entries, so requiring cqe32 + 1 of them means insisting
on 2 free CQEs where 1 is enough, and a ring with a single free entry
needlessly goes to overflow.
Check for a free CQE directly in that case, and keep the cqe32 + 1 check
for CQE_MIXED where the units are 16b.
Fixes: e26dca67fd ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
Link: https://patch.msgid.link/20260919203516.2581409-1-benquike@gmail.com
[axboe: split from Hui's original patch, edited commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_cqe_cache_refill() posts a dummy skip CQE when a 32b CQE would
straddle the end of the ring, so the real one can start at offset 0. That
only makes sense on CQE_MIXED rings, where slots are 16b and a 32b CQE
needs two of them back to back. On a CQE32 ring every slot is already
32b, but io_fill_cqe_aux32() still passes cqe32 == true, and the dummy
then gets written at cqes[off] rather than cqes[off << 1], inside another
CQE.
Limit the dummy to CQE_MIXED rings.
Fixes: e26dca67fd ("io_uring: add support for IORING_SETUP_CQE_MIXED")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
Link: https://patch.msgid.link/20260919203516.2581409-1-benquike@gmail.com
[axboe: split from Hui's original patch, edited commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_bpf_filter_clone() shares the filter table between source and
destination and marks the destination as needing a copy before it can be
modified, but leaves the source as is. Registering another filter on the
source then modifies the shared table in place, and the change shows up
in everything that cloned it.
Mark the source as COW as well.
Fixes: ed82f35b92 ("io_uring: allow registration of per-task restrictions")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
Link: https://patch.msgid.link/20260919112523.3872581-1-benquike@gmail.com
[axboe: edited patch and commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A guest can wait indefinitely in wait_for_response() for the host to
send either a rescind message or a packet completion. If the
host does not send either, the guest can remain blocked with no
diagnostic indicating a reason.
This was observed during a guest kernel upgrade in which the
host-side application handling the PCI channel faulted, causing the
guest to never receive the completion request.
Add a warning in wait_for_response() when the wait exceeds
a timeout so that such a hang is visible in the guest's kernel log
and can be correlated with host-side state.
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Sahil Chandna <sahilchandna@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCarEtCAAKCRBcsMJ8RxYu
YwmHAX4+ML995OtOeKIN2Cpiu/0RYW/bHPrBBCHsiZN2BFZ3Ap2W7nxm4/OFewA9
5oB6eKgBgL8Zi2K0ZPsiF+IxAEkWUBkvCgiQtByO3dSS6aMR6KzfrQBj0Pftlcgy
z+C74fVlyA==
=USzk
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.3-rc5' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"This mostly contain 'random' bugfixes found by LLM tools on different
xfs subsystems. A few code cleanups and a NULL ptr deref on zoned
support. Those 'random' bugfixes include possible buf overrus, UAFs,
block leaks, etc..."
* tag 'xfs-fixes-7.3-rc5' of gitolite.kernel.org:/pub/scm/fs/xfs/xfs-linux: (26 commits)
xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots
xfs: don't let hidden_space go negative in xfs_metafile_resv_init
xfs: drop dquot flush lock when we can't find a buffer to flush
xfs: fix cursor and pointer handling when recovering iunlink buckets
xfs: fix blockgc group quota scanning when usrquota isn't enforced
xfs: don't merge different file IO error types
xfs: don't let memory failures leak blocks and kill repairs
xfs: don't cross reference rmapbt with bitmaps if they're incomplete
xfs: fix rtgroup repair estimations
xfs: call xfs_dquot_set_prealloc_limits if we installed default rtb limits
xfs: fix typos and repeated words in comments
xfs: remove unused xfs_reflink_remap_range declaration
xfs: remove duplicate INO1_WRITTEN check
xfs: don't try to get a reference to a NULL oz in xfs_get_cached_zone
xfs: check di_forkoff correctly in scrub
xfs: only flag zero padding for dir3 data blocks, not dir3 block blocks
xfs: fix integer overflows in xbitmap set functions
xfs: use the correct reservations for rtrmap/refcount recovery
xfs: don't call xfs_exchange_range_finish for a dry run
xfs: check padding field in xfs_ioc_commit_range
...
Due to an incorrect old_radio_rts_threshold check, we do not set
rdev->wiphy.rts_threshold for a single-radio PHY, and the threshold
value is not propagated to lower layers.
Cc: stable@vger.kernel.org
Fixes: 264637941c ("wifi: cfg80211: Add Support to Set RTS Threshold for each Radio")
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/20260919092454.50266-1-stf_xl@wp.pl
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
fils_encrypt_assoc_req() accepts a (Re)Association Request frame whose
last element is the FILS Session element. crypt_len is then zero and
aes_siv_encrypt() is called with an empty plaintext.
kmemdup() returns ZERO_SIZE_PTR for a zero-length allocation, so the
unconditional sg_init_one() puts an invalid page into the scatterlist.
With CONFIG_DEBUG_SG this triggers a kernel BUG in sg_set_buf();
without the debug check the bogus page is handed to the crypto backend.
AES-SIV is defined for empty plaintext and the S2V result is then the
complete output, so handle this case before the CTR step, which has
nothing to encrypt.
Fixes: 39404feee6 ("mac80211: FILS AEAD protection for station mode association frames")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Reviewed-by: Ren Wei <weir@nebusec.ai>
Link: https://patch.msgid.link/325c048982d637a3af80d74ac5b36e9369b93f1e.1789751126.git.xuyuqiabc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The fixed_rate_idx debugfs file is a plain u32 attribute, so any value
can be written to it. minstrel_ht_update_stats() then copies the value
into mi->max_tp_rate[] and mi->max_prob_rate, and
minstrel_ht_set_rate() uses MI_RATE_GROUP()/MI_RATE_IDX() to index
minstrel_mcs_groups[] (42 entries) and mi->groups[].rates[] (10 entries)
with it.
Writing e.g. 65535 selects group 4095 and rate index 15, far outside
both arrays. The out-of-bounds entries are dereferenced and updated as
struct minstrel_rate_stats (retry counts, etc.), so the invalid index
corrupts adjacent kernel memory. With CONFIG_UBSAN_BOUNDS the access is
reported as an array-index-out-of-bounds in minstrel_ht_set_rate().
Only a valid group/rate pair, or U32_MAX to disable fixed rate
processing, can be used safely, so reject any other value when the
debugfs file is written.
The file is only reachable through a root-only debugfs mount, so this is
not a privilege boundary. The out-of-bounds access is still a bug that
must not be reachable through a writable debugfs attribute.
Fixes: 24f7580e85 ("minstrel_ht: fixed rate mode through debugfs")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Reviewed-by: Ren Wei <weir@nebusec.ai>
Link: https://patch.msgid.link/288e6f6d30dc82ff40da502755e6666982f6b735.1789798000.git.xuyuqiabc@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The p54 firmware parser accesses component ID and component version
records without checking that their lengths cover the fields being read.
A malformed record can therefore make the parser read past the record.
Validate the component ID and component version record lengths before
accessing their data. The descriptor record is also checked against the
shortest descriptor length found in the supported firmware images.
Reject descriptor values that underflow the RX offset or produce an empty
RX range before updating the driver state.
Assisted-by: LLM Codex
Signed-off-by: Heyang Tan <thy15333007817@163.com>
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://patch.msgid.link/20260918083349.891-1-thy15333007817@163.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mesh_fast_tx_cache() stores raw mesh_path pointers. Path deletion
flushes the cache and then frees the path with kfree_rcu(), but a
lookup that already holds the path can insert a new cache entry
after the flush. The cache then points at freed memory.
Set MESH_PATH_DELETED before flushing, and skip inserting a cache
entry if the path or MPP path is already deleted. Check this under
the cache walk lock so it is ordered with the flush. Use WRITE_ONCE()
for the deletion flag updates because the cache check reads flags
without taking state_lock.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: LLM
Co-developed-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Luxing Yin <root@tr0jan.top>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/1daa7a98199fe6965c2da7c42717073a6fd39a0b.1789615568.git.zihanx@nebusec.ai
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ieee80211_rx_h_defragment(), fragment payloads are accumulated into
entry->extra_len as subsequent fragments arrive:
entry->extra_len += rx->skb->len;
When the final fragment arrives, the head fragment is dequeued, and
pskb_expand_head() is called with entry->extra_len to ensure sufficient
tailroom for all queued fragments before copying:
if (skb_tailroom(rx->skb) < entry->extra_len) {
if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
GFP_ATOMIC))) {
...
}
}
while ((skb = __skb_dequeue(&entry->skb_list))) {
skb_put_data(rx->skb, skb->data, skb->len);
dev_kfree_skb(skb);
}
In commit 69f1322368 ("mac80211: shrink struct
ieee80211_fragment_entry"), entry->extra_len was narrowed from unsigned
int to u16 in order to reduce structure memory footprint.
However, an IEEE 802.11 frame sequence can contain up to 16 fragments
(frag numbers 0..15). If a sequence of large fragments arrives (e.g. from
a malicious peer or rogue AP), the sum of fragment lengths can exceed
65535 bytes (for example, 15 fragments of 4400 bytes total 66000 bytes).
Because extra_len is a u16, this addition overflows and wraps around
modulo 65536 (e.g. 66000 wraps to 464).
Consequently, pskb_expand_head() allocates only the truncated amount of
tailroom (or is skipped entirely if the head fragment already has >= 464
bytes of tailroom). When skb_put_data() subsequently iterates through the
queued skb list, it appends the full payload into the undersized buffer,
causing skb_put() to trigger skb_over_panic() and crash the kernel in
softirq context.
A legitimate MSDU in IEEE 802.11 is at most 2304 bytes (or up to 7935/11454
bytes for A-MSDU, which is not fragmented), well below U16_MAX.
Fix this without increasing the size of struct ieee80211_fragment_entry by
checking whether adding the incoming fragment length would exceed U16_MAX.
If so, purge the queued fragments and drop the frame.
Fixes: 69f1322368 ("mac80211: shrink struct ieee80211_fragment_entry")
Signed-off-by: Yuchao Zhang <ndaugoing@gmail.com>
Link: https://patch.msgid.link/20260918034004.85078-2-ndaugoing@gmail.com
[assign a separate drop reason]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pm_runtime_get_sync() keeps the runtime PM usage counter elevated even
when it returns an error, so the reference taken at the beginning of
wlcore_remove() has to be dropped on every exit path. When the device
was not initialized the function returned early without doing so,
leaking the reference.
Release it with pm_runtime_put_noidle() as done on the other early error
paths of this driver.
Fixes: fa2648a34e ("wlcore: Add support for runtime PM")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260917122325.2150910-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Removing an AP or mesh station can notify the driver and wake TXQs after
the station has already been removed from the driver, and can update
num_sta_ps and the power-save queues after station cleanup has purged
them.
sta_deliver_ps_frames() tests sta->dead only before it starts delivery. A
worker that passes that test can be delayed while teardown sets sta->dead
and removes the station from the driver; when it resumes it still runs the
full delivery.
The existing cancel_work_sync() sits near the end of
__cleanup_single_sta(), after the final driver state transition and after
PS accounting and queue purging, so it drains the worker only once the
state it has to protect has already changed. Before commit d34ba2168a
("mac80211: don't delay station destruction") cleanup was deferred
through the same ordered workqueue as the delivery work, which kept the
two ordered.
Cancel the work after setting sta->dead and before moving the driver
state, and move the existing cancellation to the start of
__cleanup_single_sta(). The first drain closes the driver-lifetime window;
driver callbacks during the remaining state transitions can still queue
drv_deliver_wk through ieee80211_sta_block_awake(), so retain the second
drain at the start of __cleanup_single_sta(). That drain also covers
insertion failures, which reach cleanup without setting sta->dead.
Fixes: d34ba2168a ("mac80211: don't delay station destruction")
Cc: stable@vger.kernel.org
Assisted-by: LLM sparse smatch coccinelle kasan
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260916113735.31029-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Proxy-path churn can drive the interface path counter negative and let
later mesh path additions exceed MESH_MAX_MPATHS.
mesh_path_free_rcu() decrements the interface mpaths counter for entries
from both the mesh and proxy path tables, but mpp_path_add() never
reserves a slot in that counter. Removing or expiring a proxy path
therefore returns a slot that was never charged.
mesh_path_add() uses the same counter to enforce MESH_MAX_MPATHS, so once
it falls below the number of installed paths the limit no longer holds.
Reserve the shared quota before allocating a proxy path and release it on
every unsuccessful addition. Mesh and proxy paths now share one
1024-entry budget, so mpp_path_add() can return -ENOSPC at that limit.
Fixes: ece1a2e7e8 ("mac80211: Remove mesh paths when an interface is removed")
Cc: stable@vger.kernel.org
Assisted-by: LLM sparse kasan
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260916113649.28315-3-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Repeated failed or duplicate mesh path additions can exhaust
MESH_MAX_MPATHS while the path table holds fewer paths, which stops new
paths to reachable destinations from being created.
mesh_path_add() reserves a slot before allocating and inserting a path.
If allocation fails, the function returns without releasing the slot. If
the rhashtable insertion reports an error or an existing destination, the
function discards its candidate but retains the reservation. No new path
is installed in any of these cases.
Release the reservation whenever the candidate is not installed.
Fixes: ae76eef027 ("mac80211: return new mpath from mesh_path_add()")
Fixes: 60854fd945 ("mac80211: mesh: convert path table to rhashtable")
Cc: stable@vger.kernel.org
Assisted-by: LLM sparse kasan
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260916113649.28315-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
struct dm_ioctl has seven bytes of trailing padding, so the smallest
buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data),
is seven bytes shorter than sizeof(struct dm_ioctl).
get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without
looking at how big the buffer actually is. Ask for the minimum and
data_start ends up seven bytes past the end. Callers add it to
data_size, and ctl_ioctl() copies that much back to userspace:
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0
Read of size 312 at addr ffff8880169e4c00 by task repro-dm/140
ctl_ioctl+0x5e3/0xcb0
dm_ctl_ioctl+0x25/0x40
allocated 305-byte region [ffff8880169e4c00, ffff8880169e4d31)
A DM_LIST_DEVICES with data_size set to 305 is enough to hit it, and the
seven bytes that leak are whatever sat next to the allocation.
Clamp data_start to the buffer size.
Note that this is not a security bug because the out-of-bounds read can
only be triggered by root.
Reported-by: syzbot+48d935cf48a4a76be346@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48d935cf48a4a76be346
Fixes: 76c072b48e ("dm ioctl: move compat code")
Cc: stable@vger.kernel.org
Signed-off-by: Palla Raghunath <raghunathpalla.0209@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
While rfcomm_recv_frame() verifies that skb->len is at least
sizeof(*hdr) + 1 (4 bytes: 3-byte header + 1-byte FCS), an RFCOMM frame
with an extended 2-byte length field (!__test_ea(hdr->len)) has a 4-byte
header plus a 1-byte FCS (5 bytes minimum, sizeof(*hdr) + 2).
When a 4-byte RFCOMM frame with EA == 0 arrives:
1. The initial skb->len < sizeof(*hdr) + 1 check passes (4 < 4 is false).
2. Trimming the FCS byte decrements skb->len to 3.
3. If __check_fcs() succeeds, skb_pull(skb, 4) fails (4 > 3) and returns
NULL without advancing skb->data.
4. Because the return value of skb_pull() is ignored, the un-pulled
3-byte struct rfcomm_hdr remains at skb->data and is either queued as
application payload via rfcomm_recv_data() or parsed as a multiplexer
control command via rfcomm_recv_mcc() on DLCI 0.
Fix this by extending the length check in rfcomm_recv_frame() to also
require skb->len >= sizeof(*hdr) + 2 when !__test_ea(hdr->len).
Fixes: b230e5bf50 ("Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame")
Assisted-by: LLM
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
