A nested bpf_for_each_map_elem() callback can unlock a different element
of the same map:
static long inner(void *map, int *key, struct value *v,
struct value **outer_value)
{
bpf_spin_lock(&v->lock);
bpf_spin_unlock(&(*outer_value)->lock);
return 0;
}
static long outer(void *map, int *key, struct value *v, void *ctx)
{
bpf_for_each_map_elem(map, inner, &v, 0);
return 0;
}
Both callback values currently have ID zero and the same map_ptr.
process_spin_lock() compares those two fields, so it accepts the unlock
even though the two callbacks can receive different map elements.
Assign a fresh ID to every callback map value in the for-each,
timer/workqueue, and task-work constructors. Copies of one callback
argument retain its ID, so locking and unlocking through that argument
continues to work. Distinct callbacks also get distinct IDs for
single-element arrays, including inner arrays sharing inner_map_meta.
Preserve map_uid for every inner-map lookup and compare it through
check_ids() during state pruning. This preserves relationships between
maps, keys, and values while allowing equivalent states with different
lookup IDs to match. It avoids field-specific rules for when an inner map
needs an identity.
Move map_uid out of the metadata union and next to the other IDs, so
register comparisons can use the existing memcmp() ranges and remap the
IDs separately. Clear it when resetting a register or converting a map
lookup result to a socket pointer. Shrink frameno to u8, which is enough
for MAX_CALL_FRAMES, to make room without growing bpf_reg_state.
Fixes: d0d78c1df9 ("bpf: Allow locking bpf_spin_lock global variables")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-9-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Add raw CO-RE relocations that fail to resolve their target enum value.
Place each supported and unsupported instruction form in dead code.
Unsupported targets must fail relocation with a diagnostic even when they
are unreachable. Supported ALU immediates, memory accesses, and ldimm64
instructions must still be poisoned and removed as dead code, allowing the
program to load. Check that both halves of ldimm64 are poisoned.
Load every instruction stream without relocations first to ensure that
rejection is caused by the relocation rather than the original program.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-8-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
CO-RE relocation records can name any instruction offset. When a
relocation cannot be resolved, bpf_core_patch_insn() currently poisons its
target before checking whether that instruction is a valid relocation
target. Malformed metadata can therefore replace jumps, calls, exits,
register-source arithmetic, or non-immediate loads instead of failing at
the relocation step.
Handle poisoning only after the instruction has passed the same class and
operand-form checks used for a resolved relocation. Route invalid forms
through the existing diagnostic and return a hard error. Keep poisoning
supported instructions, including both halves of a plain ldimm64, so an
unresolved relocation in dead code remains valid.
Extend bpf_core_poison_insn() to poison both halves of ldimm64, and return
its status directly from each validated instruction case. This avoids
routing the success path through a common label and leaves the helper free
to report errors.
The shared relocation code applies this restriction to both libbpf and
in-kernel CO-RE.
Fixes: d7a252708d ("libbpf: Improve handling of failed CO-RE relocations")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-7-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Add a raw program load with CO-RE relocation metadata but no func_info or
line_info. Place the relocation in dead code and require the poisoning log,
proving that the kernel processes standalone CO-RE metadata instead of
silently skipping it.
Also give a subprogram a relocatable immediate as its terminal instruction.
Require the relocation's poisoning log before check_subprogs() rejects the
resulting fall-through. With the old ordering, check_subprogs() rejects the
original terminal instruction before CO-RE can emit the substitution log, so
the test continues to distinguish the ordering after relocation target
validation is tightened.
Submit a trailing ldimm64 first slot with CO-RE metadata and require the early
structural diagnostic. This exercises the check that protects relocation
processing instead of the later regular instruction validation.
Load the standalone instruction stream without relocation metadata first to
ensure that CO-RE processing causes its poisoning diagnostic. Encode the fixed
BTF metadata directly with the selftest BTF helpers.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-6-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
check_subprogs() verifies that each subprogram ends in an exit or an
unconditional jump before in-kernel CO-RE relocations are applied. An
unresolved relocation can then replace that terminal instruction with an
invalid helper call. The resulting fall-through into another subprogram
breaks the CFG invariant used by postorder and stack liveness analysis,
which can write past their per-subprogram arrays.
Apply CO-RE relocations immediately after preparing the program BTF, before
subprogram discovery and validation. Keep func_info and line_info validation
after subprogram discovery because those records depend on the complete
subprogram layout.
Reject an ldimm64 first slot at the end of the instruction stream before
CO-RE can inspect its missing second slot. check_subprogs() previously
rejected this form before relocation processing because it is not a valid
subprogram terminator. Moving CO-RE ahead of check_subprogs() removes that
implicit protection, so perform an explicit check before applying
relocations.
Include core_relo_cnt when deciding whether to prepare program BTF. A load
that supplied only CO-RE relocation metadata previously skipped both BTF
setup and relocation processing.
Fixes: fbd94c7afc ("bpf: Pass a set of bpf_core_relo-s to prog_load command.")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-5-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Add two paths whose packet pointer ranges are individually compatible at
a join but whose members have different relative displacements. The first
path proves an eight-byte access through one member. On the second path,
the same guard only proves that the access starts before data_end.
An affected verifier prunes the second path and accepts the program. With
packet pointer class displacement preserved, it explores that path and
rejects the out-of-bounds access.
Read the unknown offset and branch selector directly from XDP context
fields, and force state checkpoints so the pruning attempt does not
depend on the verifier checkpoint heuristics.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-4-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
regsafe() maps packet pointer IDs between states and checks that each
current register range is a subset of the corresponding explored
register range. It does not, however, preserve the displacement between
registers that share a packet pointer ID.
This is unsound because packet range is shared by ID. A bounds check on
one class member updates every member, and a later access can consume the
range through another member. Commit 022ac07508 ("bpf: use reg->var_off
instead of reg->off for pointers") folded the fixed pointer offset into
r64 and removed the old off equality check, so two individually narrower
registers can prune even when their displacement has changed. The
explored path can then license an out-of-bounds packet access on the
pruned path.
Require matching range bases for packet pointers with an ID. Together
with the existing ID mapping, this preserves the displacement between
members of each packet-pointer class without adding per-ID state.
Packet pointers without an ID remain unaffected.
Fixes: 022ac07508 ("bpf: use reg->var_off instead of reg->off for pointers")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-3-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
After do_check() returns, the verifier runs several instruction rewrite
passes. Some of them patch or remove one instruction at a time. Each
operation moves the remaining instruction and auxiliary-data arrays and
adjusts all branch offsets, making the overall work quadratic in the
program length.
A privileged loader can submit 131072 unconditional jumps by zero followed
by a valid return. Verification finishes quickly, but bpf_opt_remove_nops()
then spends a long time removing each jump separately. Since this
post-verification work neither checks for signals nor reschedules, a pending
SIGKILL cannot terminate the task until the rewrite finishes.
Make bpf_patch_insn_data() and verifier_remove_insns() common cancellation
and rescheduling points. These helpers run from BPF_PROG_LOAD process
context, and bpf_patch_insn_data() can already sleep while reallocating
auxiliary data.
Report interrupted constant blinding as -EINTR and propagate it through
both JIT paths, including kernels that permit interpreter fallback.
Other blinding failures retain the existing fallback behavior.
This does not reduce the quadratic cost of the rewrite passes, but it makes
the work preemptible and allows a killed loader to be torn down promptly.
Fixes: 52875a04f4 ("bpf: verifier: remove dead code")
Reported-by: Nicholas Carlini <npc@anthropic.com>
Suggested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20260917233222.2542500-2-memxor@gmail.com
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Tariq Toukan says:
====================
net/mlx5: SD LAG and devcom stability fixes
This series by Shay fixes four bugs in the Socket Direct LAG and devcom
subsystems, all related to initialization/teardown ordering and
concurrent access to the LAG device.
====================
Link: https://patch.msgid.link/20260915113459.3934760-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a shared-FDB LAG the master device creates the bond IB device; the
other LAG members do not create their own, they populate a port inside
the master's IB device. mlx5_lag_reload_ib_reps_unlocked() reloaded the
members' IB reps in iteration order, with no guarantee the master is
reloaded first. When a non-master member is reloaded before the master,
it tries to populate its port in an IB device that has not been
recreated yet.
Hence, reload the master's IB reps first, then every other member.
Fixes: 2b204cdb12 ("net/mlx5: LAG, use xa_alloc to manage LAG device indices")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_shared_fdb_create() sets sd_fdb_active on every group member
before reloading the representors, so mlx5_lag_is_active() is already
true and the guard in mlx5_esw_offloads_rep_load() does not skip the
VF/SF reps. If the reload then fails, the error path clears
sd_fdb_active and destroys the shared FDB, leaving the reps loaded
while SD LAG is inactive - the state cited commit was written
to prevent.
Unload the reps in the error path as well.
Fixes: 68c2dd59a6 ("net/mlx5: E-Switch, Tie rep load/unload to SD LAG state")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_devcom_comp_get_size() returns the component's kref count. That
kref is bumped in mlx5_devcom_register_component() under comp_list_lock,
before the comp_dev is linked onto comp_dev_list_head under comp->sem.
The event broadcast (mlx5_devcom_locked_send_event()) walks that list.
Hence, a caller can read the expected size, but send_event won't be sent
to all peers. In the SD group registration path, this lets a member
broadcast its role-election event over an incomplete list, electing a
primary that never completes the group, is never marked ready, and
leaves the group with a stale primary.
Track the number of linked comp_devs in a dedicated counter, maintained
under comp->sem together with the list add/remove, and return it from
mlx5_devcom_comp_get_size().
Fixes: 9bb1ac8073 ("net/mlx5: devcom, Add component size getter")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260915113459.3934760-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fprobe_fgraph_entry() reserves shadow stack space for every fprobe with
an exit handler, but only fills it for those whose entry handler returns
0. fgraph_reserve_data() does not clear the area, so fprobe_return()
parses the unused tail as headers left over from an earlier call, and an
exit handler can run twice or despite its entry handler asking to skip
it.
Write a zero word after the last entry to terminate the walk. A zeroed
slot does not decode to a NULL fprobe on the arches that encode the
header into one unsigned long, since arch_decode_fprobe_header_fp() ORs
in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL
for a zeroed slot.
Link: https://lore.kernel.org/all/20260917212407.384468-1-devnexen@gmail.com/
Fixes: e0a384434a ("tracing: fprobe: do not zero out unused fgraph_data")
Cc: stable@vger.kernel.org
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
The rsrc_alloc debugfs reader writes rows directly to userspace without
respecting the caller's read count. It also uses the current row length as
the userspace stride, which can corrupt output when rows have different
widths.
Use seq_file to handle userspace buffer sizes, offsets, and partial reads,
and write output columns directly to the seq_file buffer.
Fixes: 23205e6d06 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Heyang Tan <thy15333007817@163.com>
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260914020521.146-1-thy15333007817@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
35fc: create a manual table with handle 801:, then add an auto-allocated
table. Before the fix, the auto allocation reuses id 1 and hands out the
same handle 0x80100000, aliasing the manual table; the test requires the
manual 801: handle to keep exactly one entry in the dump.
a6e8: with a live u32 table keeping the tc_u_common alive, add and delete
a manual table with handle 901:, then re-add it. Unpatched, the delete
leaks the raw-keyed IDR entry and the re-add fails with -ENOSPC; the
test requires the re-add to succeed.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: hybris <hybris@mojatatu.ai>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/QDISC-LQFE.v1.20260911041746.2@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A u32 hash table created with an explicit handle ('tc filter add ...
handle 801: u32 divisor N') keys its IDR entry on the raw handle, while
the destroy paths free it under handle2id(handle). The two key domains
disagree for handles in the 0x800..0xFFF htid range:
handle2id() folds them back into the auto-allocated id space (1..0x7FF).
A manual table therefore leaves its raw-keyed IDR entry unreachable on
delete (a permanent leak), and its delete can drop the idr entry of an
unrelated live auto table. A later auto allocation can then hand out a
handle that aliases the live manual table; u32_lookup_ht() first-match
routes lookups and TCA_U32_LINK for that htid to the wrong table.
Key the divisor-path alloc on handle2id(handle) so allocation and
removal share one key domain. A manual handle that maps onto an id
already in use is rejected with -ENOSPC, and auto allocation skips ids
held by live manual tables.
Conditions to recreate:
ip link add test0 type dummy
tc qdisc add dev test0 clsact
tc filter add dev test0 ingress protocol ip pref 1 \
handle 801: u32 divisor 16
tc filter add dev test0 ingress protocol ip pref 2 u32 divisor 16
tc -d filter show dev test0 ingress | grep 'fh 801:'
# unpatched: two live tables with handle 0x80100000 (the pref 2 root
# hnode is auto-allocated id 1); patched: the auto hnode takes id 2.
Also tested with a poc with a live u32 table on the block, add/delete a manual
table 'handle 901: u32 divisor 1' twice; unpatched, the re-add fails with
-ENOSPC because the raw key leaked on the first delete.
Fixes: 73af53d820 ("net: sched: cls_u32: Fix u32's systematic failure to free IDR entries for hnodes.")
Reported-by: Sashiko (gemini + nipa) <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260822222049.114526-1-jhs@mojatatu.com
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: hybris <hybris@mojatatu.ai>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/QDISC-LQFE.v1.20260911041746.1@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Microcode updates can usually jump revisions. However, there is an erratum on
Granite Rapids systems. If they "jump over" revision 0x1000405, they result in
an #MC. Avoid it.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260916225939.1144524-1-chang.seok.bae@intel.com
Please pull these bug fixes for keys accumulated since v7.3-rc1.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaqxgxQAKCRAaerohdGur
0jQdAQDG18jcqZxuj+DC4H5FIqRNBn+YhhRA2iOT1Qwc6wSpNAEAkgl6rdm4KY8l
EQj0HTbX8qEXSsuGGkoA41lYlwf0pAY=
=jCQU
-----END PGP SIGNATURE-----
Merge tag 'for-next-keys-v7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key fixes from Jarkko Sakkinen.
* tag 'for-next-keys-v7.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
KEYS: encrypted: fix integer overflow of datablob_len
KEYS: trusted: Fix tpm2_load_cmd() boundary check
keys: translate request_key_auth pid for the reading procfs instance
keys: fix lost wakeup when reaping a dead key type
The payload page pool pointer contains an error pointer when its
allocation fails. The cleanup path passes that error pointer to
page_pool_destroy() instead of destroying the header page pool. This
can dereference the error pointer and leave the header page pool
allocated.
Destroy the header page pool instead.
Fixes: 8a11010fdd ("eth: fbnic: allocate unreadable page pool for the payloads")
Reported-by: Sashiko <netdev-bot+sashiko@kernel.org>
Link: https://lore.kernel.org/netdev/178915061000.219967.7726187707862333281@kernel.org/
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260915104917.3978113-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a secondary channel is no longer supported by the server,
cifs_chan_skip_or_disable() drops the channel reference with
cifs_put_tcp_session() and then continues to use the server pointer by
calling cifs_signal_cifsd_for_reconnect() on it and reading its
primary_server pointer. cifs_put_tcp_session() can drop the last
reference of the channel and tear it down, so both the channel and the
primary server (whose reference is also dropped by
cifs_put_tcp_session()) can be freed before they are signaled for
reconnect.
Signal the channel and the primary server and capture the primary
server pointer before dropping the channel reference with
cifs_put_tcp_session().
Fixes: f591062bdb ("cifs: handle servers that still advertise multichannel after disabling")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
The ACP7.0 SoundWire machine table did not cover boards that combine TI
TAS2783 smart amplifiers on SoundWire link 0 with a Realtek RT712-VB
codec on link 1. In addition, the TAS2783 SoundWire codec driver was
not selected by the AMD legacy SoundWire machine config, so it was not
built for these platforms.
Select SND_SOC_TAS2783_SDW from SND_SOC_AMD_LEGACY_SDW_MACH so the
TAS2783 SoundWire codec driver is built together with the AMD legacy
(no-DSP) SoundWire machine.
Add a new link/address map, acp70_tas2783a_l0_rt712_vb_l1, describing
the TAS2783 amplifiers on link 0 and the RT712-VB codec on link 1, and
register a corresponding entry in snd_soc_acpi_amd_acp70_sdw_machines[].
The entry uses snd_soc_acpi_amd_sdca_is_device_rt712_vb() as its
machine_check callback so it only matches platforms that actually
expose the RT712-VB device.
Signed-off-by: Syed Saba Kareem <Syed.SabaKareem@amd.com>
Link: https://patch.msgid.link/20260917165314.1880855-1-syed.sabakareem@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nouveau_drm_device_init() calls pm_runtime_use_autosuspend(), but
nouveau_drm_device_fini() does not call the matching
pm_runtime_dont_use_autosuspend().
If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during teardown, this reference is not dropped and usage_count remains
unbalanced.
The documentation for pm_runtime_use_autosuspend() also notes that it
is important to undo it with pm_runtime_dont_use_autosuspend() at
driver exit time, unless runtime PM was initially enabled with
devm_pm_runtime_enable().
Add the missing pm_runtime_dont_use_autosuspend() call to the common
device teardown path.
This issue was found by manual code inspection.
Fixes: 5addcf0a5f ("nouveau: add runtime PM support (v0.9)")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260808134137.2864847-1-lgs201920130244@gmail.com
bpf_link_prime() inserts a link into link_idr before anon_inode_getfile()
succeeds and before bpf_link_settle() publishes the ID in link->id.
bpf_link_by_id() treats such an ID-zero link as unsettled, but the link
iterator takes a reference without this check.
If anon_inode_getfile() then fails, the creator removes the ID and frees
its still-private link directly. The iterator is left with a dangling
reference and its next bpf_link_put() accesses freed memory.
Treat ID-zero entries as transient in bpf_link_get_curr_or_next(), just as
bpf_link_by_id() does.
BUG: KASAN: slab-use-after-free in bpf_link_put
Write of size 8 by task exp/384
Call Trace:
bpf_link_put kernel/bpf/syscall.c:3372
bpf_link_seq_next kernel/bpf/link_iter.c:33
bpf_seq_read kernel/bpf/bpf_iter.c:158
vfs_read fs/read_write.c:572
ksys_read fs/read_write.c:716
do_syscall_64 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:121
Kernel panic - not syncing: KASAN: panic_on_warn set ...
Fixes: 9f88361273 ("bpf: Add bpf_link iterator")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260914170206.170723-2-bestswngs@gmail.com
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched->base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree().
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Cc: stable@vger.kernel.org
Signed-off-by: Jonghyuk Kim(MalHyuk) <malhyuk97@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260902012717.880724-1-malhyuk97@gmail.com
Commit 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
inadvertently moved clock enablement before core reset assertion, breaking
PCI device initialization on i.MX6Q Apalis platforms with
ASM1061/ASM1062 SATA controllers connected:
imx6q-pcie 1ffc000.pcie: host bridge /soc/pcie@1ffc000 ranges:
imx6q-pcie 1ffc000.pcie: IO 0x0001f80000..0x0001f8ffff -> 0x0000000000
imx6q-pcie 1ffc000.pcie: MEM 0x0001000000..0x0001efffff -> 0x0001000000
imx6q-pcie 1ffc000.pcie: config reg[1] 0x01f00000 == cpu 0x01f00000
imx6q-pcie 1ffc000.pcie: iATU: unroll F, 4 ob, 4 ib, align 64K, limit 4G
imx6q-pcie 1ffc000.pcie: Link: Only Gen1 is enabled
imx6q-pcie 1ffc000.pcie: Link failed to come up. LTSSM: POLL_CONFIG
imx6q-pcie 1ffc000.pcie: probe with driver imx6q-pcie failed with error -110
NOTE: It is not 100% clear if the issue is specific to the ASM1061/ASM1062
device or on the specific power-up sequence (reset vs cold-power-on).
To fix this regression, restore the original sequence where clocks are
enabled after asserting core reset and configuring the controller type.
Fixes: 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
Reported-by: Leonardo Costa <leoreis.costa@gmail.com>
Closes: https://lore.kernel.org/all/bl7i3obu2clzsgeoct2a4mtfhv6typcjdqmgneropf3hpgwve6@n2m5uhlduw57/T/#u
Reported-by: Franz Schnyder <fra.schnyder@gmail.com>
Closes: https://lore.kernel.org/all/t65y5d54axtksbfs7r4olcefqhwm6m4dz3njgnrnf7fcotj74i@o7avoznlafbj/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: move to pci/for-linus for v7.3]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 7.2+
Link: https://patch.msgid.link/20260813095003.356062-1-hongxing.zhu@oss.nxp.com
My Meta email address is no longer active. Map it to my current address
so that git and get_maintainer.pl stop pointing at a dead address for my
contributions.
Signed-off-by: Wei Wang <weiwan@google.com>
Link: https://patch.msgid.link/20260915201412.2201757-1-weiwan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dup_and_fixup_symbol_prop() rewrites a symbol value by replacing its
"/fragment/__overlay__" prefix with the fragment's target path. When
the fragment targets the root node the target path is "/" and the
result starts with "//", which __of_find_node_by_full_path() cannot
resolve: symbols pointing into such fragments silently stop
resolving.
Drop the target path when it is the root and the tail is non-empty. A
value naming the fragment root itself (empty tail) keeps the "/".
Fixes: d1651b03c2 ("of: overlay: add overlay symbols to live device tree")
Assisted-by: Claude:claude-fable-5 [Claude Code]
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-7-02754604805a@nexthop.ai
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
nouveau_uvmm_sm() calls op_map(), which passes bo->resource through
nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads
mem->mem.type.
But this is only valid when bo->resource is backed by struct nouveau_mem,
as is the case for VRAM and TT resources. If the BO is left in
TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it
as struct nouveau_mem makes the mem->mem.type read past the end of the
resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm
report:
BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline]
nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532
nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline]
nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364
drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061
process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322
process_scheduled_works kernel/workqueue.c:3405 [inline]
worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486
kthread+0x31d/0x420 kernel/kthread.c:436
ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 2224 on cpu 0 at 66.550027s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106
dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205
ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721
ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856
ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970
nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359
nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272
nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352
drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914
nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 2223 on cpu 0 at 66.554063s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x61/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
__rcu_free_sheaf_prepare+0xb6/0x2e0 mm/slub.c:2928
rcu_free_sheaf+0x1b/0x120 mm/slub.c:5978
rcu_do_batch kernel/rcu/tree.c:2645 [inline]
rcu_core+0x521/0x1490 kernel/rcu/tree.c:2897
handle_softirqs+0x1b1/0x8a0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
invoke_softirq kernel/softirq.c:496 [inline]
__irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735
irq_exit_rcu+0x9/0x20 kernel/softirq.c:752
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline]
sysvec_apic_timer_interrupt+0x70/0x80 arch/x86/kernel/apic/apic.c:1062
asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674
The buggy address belongs to the object at ffff888127d3e380
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 32 bytes inside of
freed 96-byte region [ffff888127d3e380, ffff888127d3e3e0)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127d3e
flags: 0x200000000000000(node=0|zone=2)
page_type: f5(slab)
raw: 0200000000000000 ffff888100041280 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000200020 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888127d3e280: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
ffff888127d3e300: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc
>ffff888127d3e380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888127d3e400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
ffff888127d3e480: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc
Fix by resetting the placement to the BO's valid domains before
calling nouveau_bo_validate(), matching the handling in
nouveau_uvmm_bo_validate(), so map jobs do not run for SYSTEM resources;
Reject BO that cannot reside in VRAM or GART;
Also skip op_map() when the GPUVA has been invalidated, matching the
handling in the unmap and remap paths.
Found when fuzzing the nouveau driver with a modified Syzkaller.
Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.5
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/0D77BEC410CE0129+20260907052204.1431488-1-peiyang_he@smail.nju.edu.cn
init_overlay_changeset() stores the number of initialized fragments
in ovcs->count only on full success. When find_target() or the
__symbols__ lookup fails partway through, the target and overlay
references taken for the fragments initialized so far are never
dropped: free_overlay_changeset() bounds its cleanup loop by
ovcs->count, which is still 0.
Store the running count on the error path so free_overlay_changeset()
puts whatever was set up. The store is guarded by ovcs->fragments
because on the allocation-failure path cnt still holds the counting
pass total while there is no fragments array; everywhere else cnt
only counts fully-initialized fragments.
Reported-by: Sashiko AI <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/20260805204009.CF3891F000E9@smtp.kernel.org
Fixes: 61b4de4e0b ("of: overlay: minor restructuring")
Assisted-by: Claude:claude-opus-4-8 [Claude Code]
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-6-02754604805a@nexthop.ai
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
of_overlay_fdt_apply() stores the idr_alloc() return value in
ovcs->id before checking it. On failure the stored id is negative,
free_overlay_changeset()'s "if (ovcs->id)" check passes, idr_remove()
is called with a negative id and list_del() runs on ovcs->ovcs_list,
which is not initialized until after the id allocation. An allocation
failure at that point dereferences NULL.
Make free_overlay_changeset() treat only a strict-positive id as
registered. The rest of the function already copes with a
partially-initialized ovcs, so the error path stays a plain
goto err_free_ovcs.
Fixes: 61b4de4e0b ("of: overlay: minor restructuring")
Cc: stable@vger.kernel.org
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Assisted-by: Claude:claude-fable-5 [Claude Code]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-5-02754604805a@nexthop.ai
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
add_changeset_property() links a new property of a not-yet-live
target node into the node's deadprops list before handing it to
of_changeset_add_property(). If that fails, the error path frees the
property but leaves the freed pointer linked in deadprops, and
of_node_release() frees it a second time when the aborted overlay's
node is released.
Record the changeset entry first and link the property into deadprops
only on success. of_changeset_add_property() never looks at the
node's property lists, so the order of the two steps is otherwise
immaterial, and the error path frees a property that nothing
references.
Fixes: f962788101 ("of: overlay: set node fields from properties when add new overlay node")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5 [Claude Code]
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Link: https://patch.msgid.link/20260831-nh-of-alias-overlay-v7-4-02754604805a@nexthop.ai
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now that we're properly saving the compbit backing stores on fbsr init, we
can start setting bEnteringGcOff = 1 again without things breaking, which
brings us closer to following the exact same code-paths OpenRM does for
fbsr.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260917185916.1089621-6-lyude@redhat.com
One of the portions of OpenRM's fbsr process that we never implemented is
the saving and restoring of comptag backing stores. This isn't strictly
necessary for fbsr to work (as long as we don't specify bEnteringGcOff =
1), but implementing it brings us much closer to matching OpenRM's fbsr
process - which means we can rely on things being well tested on Nvidia's
side.
Now that we have the required driver workarounds in place and fetch the
required information from GSP's memsys on driver load, let's implement
support for this by fetching the required space for the compbit backing
stores and adding it to the amount of memory that we allocate for fbsr.
With this, we should be able to safely enable bEnteringGcOff in fbsr.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260917185916.1089621-5-lyude@redhat.com
One of the things that OpenRM does right before initiating fbsr is apply a
special workaround (nvidia issue #3172217) which temporarily disables raw
compression mode on the GPU. It is later re-enabled after resuming with
fbsr completes.
Since we don't currently save the compbit backing with fbsr, this shouldn't
currently make any functional difference in the suspend/resume process. But
it will be required for implementing support for saving and restoring
compbit backings from the GPU.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260917185916.1089621-4-lyude@redhat.com
This is a GSP structure describing various characteristics of the memory
management system that GSP provides. Start by fetching it during driver
load, but don't do anything with the information we get from it just yet.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260917185916.1089621-3-lyude@redhat.com
OpenRM's runtime PM handling looks a bit different then nouveau's, one part
in particular that differs from us: OpenRM actually consults GSP to ask
whether the GPU should be allowed to enter Gc6 and/or GcOff before runtime
suspending the GPU. In the event the card isn't ready, runtime suspend is
simply delayed for a few seconds before retrying.
Implement the command used for querying GSP about this,
NV2080_CTRL_CMD_INTERNAL_GCX_ENTRY_PREREQUISITE, and check to ensure that
the GPU is ready for runtime suspend in nouveau_pmops_runtime_suspend()
using this query. If the GPU can't be runtime suspended, update the last
busy counter of the device and then return -EBUSY from
nouveau_pmops_runtime_suspend() - essentially delaying the runtime suspend
process by whatever autosuspend_delay_ms is set to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260917185916.1089621-2-lyude@redhat.com
Commit c322874710 ("gpu/drm/nouveau: enable THP support for GPU memory
migration") grew the device-private region that
nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to
DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that
region at DMEM_CHUNK_SIZE.
nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset
within the registered region, so every page past the first chunk resolves
to VRAM outside the buffer object.
Size the buffer object to the region it backs.
Fixes: c322874710 ("gpu/drm/nouveau: enable THP support for GPU memory migration")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Assisted-by: LLM
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260817-nouveau-fixes-v1-1-f518d0c735f3@outlook.com
On failure, nouveau_cli_init() calls nouveau_cli_fini() to tear
the client down. Then, nouveau_drm_open() also enters into its
cleanup path and calls nouveau_cli_fini() AGAIN. nouveau_cli_fini()
calls nouveau_vmm_fini():
void
nouveau_vmm_fini(struct nouveau_vmm *vmm)
{
nouveau_svmm_fini(&vmm->svmm);
nvif_vmm_dtor(&vmm->vmm);
vmm->cli = NULL;
}
Inside nvif_vmm_dtor(), vmm->page is freed unconditionally:
void
nvif_vmm_dtor(struct nvif_vmm *vmm)
{
kfree(vmm->page);
nvif_object_dtor(&vmm->object);
}
vmm->page is never cleared after being freed, so the second call of
nvif_vmm_dtor() will cause a double-free.
Found by fuzzing the nouveau driver with a modified Syzkaller:
BUG: KASAN: double-free in nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
Free of addr ffff888010fcdc30 by task syz.0.173/2567
CPU: 1 UID: 0 PID: 2567 Comm: syz.0.173 Not tainted 7.2.0 #24 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report_invalid_free+0xaa/0xd0 mm/kasan/report.c:557
check_slab_allocation+0xe4/0x110 mm/kasan/common.c:235
kasan_slab_pre_free include/linux/kasan.h:199 [inline]
slab_free_hook mm/slub.c:2622 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x192/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_drm_open+0x24e/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1255
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fc6d687594d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fc6d5295008 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
RAX: ffffffffffffffda RBX: 00007fc6d6b06180 RCX: 00007fc6d687594d
RDX: 0000000000022501 RSI: 0000200000000000 RDI: ffffffffffffff9c
RBP: 00007fc6d691c303 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fc6d6b06218 R14: 00007fc6d6b06180 R15: 00007ffd9451d760
</TASK>
Allocated by task 2567 on cpu 1 at 163.593900s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
nvif_vmm_ctor+0x3c0/0x7e0 drivers/gpu/drm/nouveau/nvif/vmm.c:237
nouveau_vmm_init+0x40/0x90 drivers/gpu/drm/nouveau/nouveau_vmm.c:134
nouveau_cli_init+0x7b9/0xe10 drivers/gpu/drm/nouveau/nouveau_drm.c:293
nouveau_drm_open+0x236/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1243
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 2567 on cpu 1 at 163.601355s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x61/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x383/0x590 mm/slub.c:6692
nvif_vmm_dtor+0x31/0x50 drivers/gpu/drm/nouveau/nvif/vmm.c:194
nouveau_vmm_fini+0x16/0x50 drivers/gpu/drm/nouveau/nouveau_vmm.c:127
nouveau_cli_fini+0x10e/0x210 drivers/gpu/drm/nouveau/nouveau_drm.c:225
nouveau_cli_init+0x593/0xe10 drivers/gpu/drm/nouveau/nouveau_drm.c:324
nouveau_drm_open+0x236/0x740 drivers/gpu/drm/nouveau/nouveau_drm.c:1243
drm_file_alloc+0x5f2/0xad0 drivers/gpu/drm/drm_file.c:176
drm_open_helper+0x1d7/0x4a0 drivers/gpu/drm/drm_file.c:335
drm_open+0x190/0x3d0 drivers/gpu/drm/drm_file.c:388
drm_stub_open+0x1f2/0x460 drivers/gpu/drm/drm_drv.c:1211
chrdev_open+0x21c/0x660 fs/char_dev.c:411
do_dentry_open+0x59d/0x12b0 fs/open.c:947
vfs_open+0x82/0x390 fs/open.c:1052
do_open fs/namei.c:4700 [inline]
path_openat+0x2345/0x3420 fs/namei.c:4863
do_file_open+0x207/0x460 fs/namei.c:4892
do_sys_openat2+0xd1/0x1d0 fs/open.c:1368
do_sys_open fs/open.c:1374 [inline]
__do_sys_openat fs/open.c:1390 [inline]
__se_sys_openat fs/open.c:1385 [inline]
__x64_sys_openat+0x144/0x200 fs/open.c:1385
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The buggy address belongs to the object at ffff888010fcdc30
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [ffff888010fcdc30, ffff888010fcdc40)
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10fcd
flags: 0x100000000000000(node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000000 ffff88800d441640 dead000000000100 dead000000000122
raw: 0000000000000000 0000000000550055 00000000f5000000 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888010fcdb00: fc fc 00 04 fc fc fc fc fa fb fc fc fc fc fa fb
ffff888010fcdb80: fc fc fc fc fa fb fc fc fc fc 00 07 fc fc fc fc
>ffff888010fcdc00: fa fb fc fc fc fc fa fb fc fc fc fc fa fb fc fc
^
ffff888010fcdc80: fc fc fa fb fc fc fc fc 00 04 fc fc fc fc fa fb
ffff888010fcdd00: fc fc fc fc 00 00 fc fc fc fc fa fb fc fc fc fc
Fix by removing the redundant teardown in nouveau_drm_open(),
since nouveau_cli_init() already does the cleanup work.
Also clear vmm->page after its freeing.
Cc: stable@vger.kernel.org
Fixes: 20d8a88e55 ("drm/nouveau: tidy up the client init/fini interfaces")
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: LLM
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/03BA723D9E5FF725+20260916103138.2651605-1-peiyang_he@smail.nju.edu.cn
fsl_qspi_select_mem() returns early when the chip select has not changed,
which happens before it reaches clk_set_rate(). Since the rate is now
taken from the spi-mem operation rather than from the SPI device, the
controller honours op->max_freq exactly once per chip select and ignores
it for every operation after that.
q->selected is only reset to -1 in fsl_qspi_default_setup(), i.e. at probe
and on resume, so on the common single chip select board the very first
operation latches a rate that all subsequent operations inherit, whatever
frequency they asked for.
This results in operations being issued with the wrong frequency.
Cache the operation frequency the clock was programmed for next to the
selected chip select, and redo the clock setup when either changes.
Fixes: 2438db5253 ("spi: fsl-qspi: Support per spi-mem operation frequency switches")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Han Xu <han.xu@nxp.com>
Link: https://patch.msgid.link/20260917-fsl-qspi-freq-op-fix-v1-1-5fbe6b02f738@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
If nvif_outp_edid_get() fails, nouveau_connector_detect() returns
early without dropping the runtime PM reference taken at the start
of the function, keeping the device powered on until the next
successful detect.
Balance the reference on the error path like the other exit paths
do.
Fixes: 0cd7e07181 ("drm/nouveau/disp: add output method to fetch edid")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260916180342.2090360-1-vulab@iscas.ac.cn
On the ttm_bo_reserve() failure and "vma not found" error paths, the
loop breaks without adding the looked-up object to any validate list,
so the reference taken by drm_gem_object_lookup() is never released;
validate_fini() only walks the spliced lists. Drop the reference
before breaking out on both paths.
Fixes: 19ca10d82e ("drm/nouveau/gem: lookup VMAs for buffers referenced by pushbuf ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260916180202.2090231-1-vulab@iscas.ac.cn
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
reparse_data_buffer structure before accessing its fields.
Fixes: 56e84c64fc ("cifs: Fix validation of SMB1 query reparse point response")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check is ineffective as it
only reduces ret_data_len.
Fix this by rejecting replies shorter than
sizeof(struct smb_snapshot_array) with -EIO. Note that the bound is set
to the 12-byte struct size rather than the 16-byte
MIN_SNAPSHOT_ARRAY_SIZE defined in MS-SMB2 3.3.5.15.1, because 12 bytes
is exactly what copy_to_user() attempts to read.
Fixes: e02789a53d ("smb3: enumerating snapshots was leaving part of the data off end")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied
out_len without being validated against the actual length of the received
iov (iov_len).
If a server provides an inflated out_len, sidsbuf_end will point past the
end of the iov. This defeats the bounds guards in posix_info_sid_size(),
allowing out-of-bounds reads into adjacent kernel memory.
Fix this by rejecting responses where the calculated sidsbuf_end would
exceed the received iov boundaries or cause pointer wraparound.
Fixes: a90f37e3d7 ("smb: client: parse owner/group when creating reparse points")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
In move_smb2_ea_to_cifs(), the while (src_size > 0) loop condition is
insufficient. It allows iteration to continue even if the remaining
src_size is too small to contain a complete smb2_ea_info structure.
Consequently, reads of ea_name_length and ea_value_length can occur
out-of-bounds.
Fix this by ensuring src_size >= sizeof(*src) before attempting to read
any structure fields. Additionally, reject any next_entry_offset that is
smaller than sizeof(*src) or that would advance the pointer beyond the
available buffer.
Note that for calls where the server returns a malformed EA list, the
error returned to userspace changes from -ENODATA (getxattr) or
-ERANGE (listxattr) to -EIO. This correctly signals a server protocol
error rather than misleadingly indicating "attribute not present" or
"output buffer too small".
Fixes: 95907fea4f ("cifs: Add support for reading attributes on SMB2+")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
In parse_server_interfaces(), the server-supplied Next offset is
validated against bytes_left, but not against the size of the interface
structure itself.
A small, non-zero Next value can pass the bounds check but advance the
pointer by less than sizeof(*p). This causes the next iteration of the
loop to read misaligned, overlapping structure fields.
Fix this by ensuring the Next offset is at least sizeof(*p).
Fixes: 7d34ec36ab ("smb3: fix for slab out of bounds on mount to ksmbd")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
parse_dfs_referrals() checks that DfsPathOffset and NetworkAddressOffset
do not exceed the buffer end, but fails to check that they don't point
inside the referral header itself.
If a server provides an offset smaller than
sizeof(struct dfs_referral_level_3), the derived string pointer overlaps
with the struct fields, causing cifs_strndup_from_utf16() to interpret
header data as UTF-16 strings.
Fix this by enforcing that string offsets are at least sizeof(*ref).
Fixes: 4ecce920e1 ("CIFS: move DFS response parsing out of SMB1 code")
Cc: stable@vger.kernel.org
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paulo Alcantara <pc@manguebit.org>
