__touch_cap() moves one capability to the end of the LRU list; this
list is sorted by access time for just one thing: ceph_trim_caps().
That function is supposed to discard the least-recently used
capabilities.
__touch_cap() is called extremely often - several times for every
system call, but ceph_trim_caps() is only called rarely.
__touch_cap() causes considerable lock contention on
`ceph_mds_session.s_cap_lock`; this is a /proc/lock_stat I captured on
one of our web servers for 5 minutes:
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&s->s_cap_lock: 336304046 341686597 0.04 4905.76 418498578.76 1.22 892783632 1957814739 0.04 959.40 355752146.24 0.18
--------------
&s->s_cap_lock 339379730 [<00000000a2197200>] __ceph_caps_issued_mask+0x1bc/0x240
&s->s_cap_lock 1268054 [<00000000c96a24b7>] ceph_add_cap+0x234/0x3e0
&s->s_cap_lock 1021360 [<00000000aa76f996>] ceph_add_cap+0x108/0x3e0
&s->s_cap_lock 16042 [<0000000099463548>] __ceph_remove_cap+0x1f4/0x270
--------------
&s->s_cap_lock 338509619 [<00000000a2197200>] __ceph_caps_issued_mask+0x1bc/0x240
&s->s_cap_lock 1937864 [<00000000c96a24b7>] ceph_add_cap+0x234/0x3e0
&s->s_cap_lock 1203451 [<00000000aa76f996>] ceph_add_cap+0x108/0x3e0
&s->s_cap_lock 202 [<00000000888f212a>] __ceph_remove_cap+0x7c/0x270
In this /proc/lock_stat output, __touch_cap() is inlined in
__ceph_caps_issued_mask(). It is responsible for 99% of all
contentions.
Since __touch_cap() is called so often, it is acceptable to just skip
most calls. The most busy capabilities will still gravitate towards
the end of the linked list, and if not, it doesn't hurt as much as the
lock contention. This is still good enough for ceph_trim_caps().
This patch adds a static variable that gets incremented with each
call, and 255 out of 256 calls will just be skipped. I didn't bother
to make the increment atomic or use READ_ONCE because I don't think
that makes a practical difference for this use case.
Another /proc/lock_stat for 5 minutes with this patch (__touch_cap()
is no longer inlined probably because it contains a static variable):
class name con-bounces contentions waittime-min waittime-max waittime-total waittime-avg acq-bounces acquisitions holdtime-min holdtime-max holdtime-total holdtime-avg
&s->s_cap_lock: 1043711 1065182 0.04 502.72 737472.88 0.69 10522578 25069948 0.04 796.44 11053669.64 0.44
--------------
&s->s_cap_lock 1043074 [<00000000f4367d73>] __touch_cap.isra.0+0x50/0xa8
&s->s_cap_lock 12147 [<0000000096f45706>] ceph_add_cap+0x234/0x3e0
&s->s_cap_lock 9472 [<0000000038a23e0f>] ceph_add_cap+0x108/0x3e0
&s->s_cap_lock 471 [<00000000e2eba934>] __ceph_remove_cap+0x1f4/0x270
--------------
&s->s_cap_lock 978499 [<00000000f4367d73>] __touch_cap.isra.0+0x50/0xa8
&s->s_cap_lock 57794 [<0000000038a23e0f>] ceph_add_cap+0x108/0x3e0
&s->s_cap_lock 27226 [<0000000096f45706>] ceph_add_cap+0x234/0x3e0
&s->s_cap_lock 1581 [<00000000e2eba934>] __ceph_remove_cap+0x1f4/0x270
__touch_cap() is still responsible for 91% of all contentions, but the
number of contentions has been reduced by a factor of 320 and the
total wait time by a factor of 567.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
system_wq (per-CPU) and system_unbound_wq (unbound) are the older
workqueue name, replaced by system_{percpu|dfl}_wq.
The new workqueues have been introduced by:
128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
Usage of older workqueues will now trigger a pr_warn_once() because they are
marked as deprecated as per commit:
64d8eae3f8 ("workqueue: Add warnings and fallback if system_{unbound}_wq is used")
So change the used workqueue with the newer, keeping the same behavior.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Merge additional cpufreq updates and one update related to system sleep
for 7.3-rc1:
- Unblock runtime PM when device prepare fails that was not done by
mistake (Shibo Zhu)
- Fix possible rate limit overflow on 32-bit systems in the schedutil
cpufreq governor (Hui Su)
- Consolidate HWP P-states initialization in the intel_pstate cpufreq
driver and make that driver avoid using the DESIRED_PERF HWP hint
when the Dynamic Efficiency Control (DEC) is enabled in the processor
to avoid inconsistent behavior (Rafael Wysocki)
* pm-cpufreq:
cpufreq: intel_pstate: Avoid using DESIRED_PERF when DEC is enabled
cpufreq: intel_pstate: Consolidate HWP P-states initialization
cpufreq: schedutil: Fix rate limit overflow
* pm-sleep:
PM: sleep: Unblock runtime PM when device prepare fails
Merge updates of assorted ACPI drivers for 7.3-rc1:
- Protect all battery properties with a separated mutex in the ACPI
battery driver to prevent race conditions from occurring and avoid
evaluating the _BST ACPI control method multiple times in parallel
for the same battery device (Rong Zhang)
- Add DMI quirk for Razer Blade Pro 17 early 2020 lid switch to the
ACPI button driver (Robin Everaars)
- Convert fixed clock rates in the ACPI driver for AMD SoCs (APD) to
use HZ_PER_MHZ and add a clock frequency for the HJMC01 I2C
controller to it (Hongnan Li and Xiangyang Yu)
- Fix a stack buffer overflow in query_capability() in the ACPI
platform firmware runtime update driver (Anirudh Prasad)
* acpi-battery:
ACPI: battery: Protect all properties with a separated mutex
* acpi-button:
ACPI: button: Add DMI quirk for Razer Blade Pro 17 early 2020 lid switch
* acpi-soc:
ACPI: APD: Add clock frequency for HJMC01 I2C controller
ACPI: APD: Convert fixed clock rates to use HZ_PER_MHZ
* acpi-pfrut:
ACPI: pfr_update: fix stack buffer overflow in query_capability()
The fscrypt subsystem uses the scatterlist crypto API, inheriting its
requirement that any buffers are in the linear mapping region. However,
the messenger client uses kvmalloc() to create buffers for messages,
which will occasionally place those buffers in the vmalloc() region when
physical memory fragmentation doesn't permit a large enough kmalloc().
The various callers of ceph_fname_to_usr() directly pass (slices of) raw
messages from the MDS without considering that the messages may be in
vmalloc() buffers, resulting in oopses especially on non-x86 platforms
(see 'Closes:' for more details and a reproducer).
Make ceph_fname_to_usr() explicitly tolerant of vmalloc()-allocated
fname->ctext, fname->name, and/or oname->name buffers, using `tname`
(which, when non-null, must be a linear address; when null, is briefly
allocated as necessary) as a bounce buffer to avoid passing any
inappropriate addresses to fscrypt_fname_disk_to_usr().
Additionally change parse_reply_info_readdir() -- the only function to
supply its own `tname` -- to follow the new "tname must never come from
vmalloc()" rule by passing NULL when the message is not in the linear
region. Though this causes a per-dentry kmalloc()+kfree(), this overhead
exists only when processing the minority of messages that spill into
vmalloc(). My (crude) testing puts this at only about 1 in 8,000 readdir
messages. Still, if the overhead proves unreasonable in the future, it
is easy enough to mitigate: a future change could allocate a bounce
buffer in parse_reply_info_readdir() and use that as `tname` instead.
Cc: stable@vger.kernel.org # 888d33b208: ceph: pass fscrypt `tname` buffers directly
Cc: stable@vger.kernel.org
Fixes: 457117f077 ("ceph: add helpers for converting names for userland presentation")
Closes: https://lore.kernel.org/ceph-devel/20260415034020.11530-1-CFSworks@gmail.com/
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_fname_to_usr() needs a temporary buffer for some operations
(currently only base64-decoding ciphertext) and it is convenient to
allow the caller to specify this buffer to avoid a heap allocation, so
it has a (nullable) `tname` argument. Until now, this argument was a
`struct fscrypt_str`; however, this is unnecessary for two reasons:
1. `tname->len` isn't used anywhere: ceph_fname_to_usr() assumes a
buffer large enough to hold the ciphertext, and
parse_reply_info_readdir() -- the only caller to use tname -- doesn't
set it.
2. While the `tname` parameter is documented "may be NULL,"
parse_reply_info_readdir() always passes it but with `tname->name`
sometimes NULL in violation of the contract, indicating that the
unnecessary container creates actual confusion.
Therefore, change the type to `unsigned char *` and pass the buffer
directly.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When mkdir succeeds, ceph_mkdir() sets ret to ERR_PTR(0) which is
incorrect. It should return NULL instead for success.
Fixes: 88d5baf690 ("Change inode_operations.mkdir to return struct dentry *")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Merge changes related to primary "physical" device lookup for a given
ACPI device object that include the introduction of a new lookup helper
function and core ACPI device enumeration code updates putting that new
function to use (Rafael Wysocki)
* acpi-bus:
ACPI: scan: Use acpi_bus_get_primary_device()
ACPI: platform: Use acpi_bus_get_primary_device()
ACPI: bus: Introduce acpi_bus_get_primary_device()
Merge core ACPI device enumeration code changes for 7.3-rc1:
- Prevent the core ACPI enumeration code from combining device
resources that overlap completely in order to avoid resource
conflicts during platform device registration because there are
drivers that expect such resources to be present (Rafael Wysocki)
- Defer device power initialization during ACPI-based device
enumeration to the point when the given device is known to be present
and functional and all of its dependencies have been met (Peixin Xie)
- Fix bus ID cleanup on device_add() failures during ACPI device object
registration (Hongyan Xu)
* acpi-scan:
ACPI: scan: Do not combine resources that overlap completely
ACPI: scan: Defer device power initialization
ACPI: scan: fix bus ID cleanup on device_add() failures
long ago but fell through the cracks, and an update to the Italian
translations.
-----BEGIN PGP SIGNATURE-----
iQFCBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmqPEkcPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YnG4H9RbUq6++y8s7b+Hadki0d1O3xn6exEEpI3nt
0x4w3KHGT6fuTe5jLMOlP1QKlV9sN/5XrEDmtuaZObvF0yKyREX05QhsiMTfn9cj
E749WfSUQ4zCeI8JZ7LtNT7AQA0zJxQkirUHdkmMNoMPGWcuPZYJGuhQFL+9c83N
w8ZWGCi5CZ/kGlO36fXy/apSEngfG4gTiAtBVwG7fB+y9cYhHndy6Rr7Vt70hQQZ
6UwOC5kERlCwh3dIq0RwFhMJzGs6adDUi3lfzw4owqbXxdOA5VRrrVaVFNrAnWTD
0fZwSSkxBVztmlU4nm1uZut6VeUIwugbWT08JiEa8mHq8vgPfg==
=rrXi
-----END PGP SIGNATURE-----
Merge tag 'docs-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving fixes, a Japanese translation that was
ready long ago but fell through the cracks, and an update to the
Italian translations"
* tag 'docs-7.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: panic: Disclaimer about console verbosity when using panic_print with pstore
docs: kernel-parameters: add CPU_FREQ, CPU_IDLE build options
doc:it_IT: align Italian documentation in process
docs: threat-model: fix /dev/kmsg reference
docs: block: fix dead http link in blk-mq.rst
docs/ja_JP: translate submitting-patches.rst (tag usage)
We get a reference to the fwnode handle which we pass to
gpio_shared_make_ref. In case it fails we do not put the reference.
Fix by putting the reference in the failure case
Fixes: 49416483a9 ("gpio: shared: allow sharing a reset-gpios pin between reset-gpio and gpiolib")
Cc: stable@vger.kernel.org
Signed-off-by: Michail Tatas <michail.tatas@gmail.com>
Link: https://patch.msgid.link/an4Asr4tx3D2QvLD@michalis-linux
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide
-----BEGIN PGP SIGNATURE-----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=6NL2
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull another power sequencing update from Bartosz Golaszewski:
"A single tree-wide rename of two of the public functions to better
reflect their actual semantics:
- rename pwrseq_power_on/off() to pwrseq_enable/disable() tree-wide"
* tag 'pwrseq-updates-for-v7.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: rename pwrseq_power_on/off() to pwrseq_enable/disable()
Rename the function to cx_process_headset_detect_plug_type() to reflect
that it only reports the detected plug type, and move the pin control
write into cx_update_headset_mic_vref() so that node 0x19 is always set
to enable the headset mic with the 80% VREF whenever the mic is
present, regardless of the type detection result.
Signed-off-by: Bob Song <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260826115344.2128835-1-songxiebing@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches
e->items, but it lets item[1] be equal to it. Both go on to
snd_soc_enum_item_to_val(), which indexes e->values with no bound of
its own, so an enum with a value table reads one element past the end.
The indexing arrived with the MUX consolidation, which relaxed the
item[1] check in the same hunk. The value MUX handler it deleted used
>= there, and the snd_soc_put_enum_double() in soc-ops.c still does.
Only adav80x pairs a value table with two shifts, and its second
channel looks accidental, but the control does report two values.
Writing three into it reads off the end of adav80x_mux_values. The
core catches that only under CONFIG_SND_CTL_INPUT_VALIDATION, which
defaults off.
Fixes: 3727b49684 ("ASoC: dapm: Consolidate MUXs and value MUXs")
Assisted-by: Claude:claude-opus-5
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Link: https://patch.msgid.link/20260825125745.932832-1-sammiee5311@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_irq_parse_one() raises the refcount of the interrupt controller node
on success, and of_irq_get_affinity() returns without putting it, so
every call past the parse leaks one reference. It is reached from
platform_get_irq_affinity(), used by arm_pmu, arm_spe_pmu and
coresight-trbe.
Put it once irq_populate_fwspec_info() has run: no in-tree
->get_fwspec_info() returns a mask that lives in the node.
Fixes: 5404f5c06d ("of/irq: Add interrupt affinity reporting interface")
Signed-off-by: Fuad Tabba <fuad.tabba@linux.dev>
Link: https://patch.msgid.link/20260826112234.1033974-1-fuad.tabba@linux.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The BIOS on the HP OmniBook X Flip 16-cc0xxx (board 8EA2) reports
acp-audio-config-flag = FLAG_AMD_LEGACY_ONLY_DMIC. This binds the
legacy ACP driver and registers a PDM-only card, so the SoundWire
links are never scanned and the two TAS2783 speaker amplifiers and
RT712-VB codec do not enumerate.
Add a DMI entry for board 8EA2 to the ACP70 ACPI flag override table
so the firmware-provided flag is overridden and snd_pci_ps probes
instead.
On the affected system, an otherwise identical upstream kernel
without this entry binds snd_acp_pci, enumerates no SoundWire slave
devices and exposes no internal speaker PCM. With the entry added,
snd_pci_ps binds, both TAS2783 amplifiers and the RT712-VB enumerate
over SoundWire, and the amd-soundwire card exposes the internal
speaker playback PCM.
Developed with AI assistance. ChatGPT helped analyze the ACP and
SoundWire behavior, structure the controlled A/B testing, and draft
the patch changelog. All hardware measurements, kernel builds,
reboots and playback tests were performed by the submitter. The
submitter has reviewed the change, understands it and takes
responsibility for it.
Assisted-by: ChatGPT:GPT-5.6 Sol
Signed-off-by: Sehat Mahde <hskmahde@gmail.com>
Link: https://patch.msgid.link/20260825224640.13662-1-hskmahde@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add matching DMI table entry for the ES83xx machine driver, so the
HUAWEI HVY-WXX9 / M1060 board (MateBook D16 2021, Ryzen 5 4600H) can
successfully probe its ES8316 codec via the acp3x-es83xx machine
driver, consistent with the existing M1010/M1020/M1040 entries for
the same board name.
Signed-off-by: Mehmet Aysel <mehmet4ysel@gmail.com>
Link: https://patch.msgid.link/20260825092432.56292-2-mehmet4ysel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add DMI match table entry for HUAWEI HVY-WXX9 board, product version
M1060, a MateBook D16 2021 (Ryzen 5 4600H) revision not covered by the
existing M1010/M1020/M1040 entries. This board uses the same
FLAG_AMD_LEGACY / ACP_PCI_DEV_ID configuration as the other HVY-WXX9
variants.
Signed-off-by: Mehmet Aysel <mehmet4ysel@gmail.com>
Link: https://patch.msgid.link/20260825092432.56292-1-mehmet4ysel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i2c_mux_add_adapter() takes a reference to the Device Tree channel node
before registering the new adapter. If adapter registration fails, the
error path frees the private data without dropping that reference.
Release the channel node before freeing the private data.
Fixes: bc45449b14 ("i2c/of: Automatically populate i2c mux busses from device tree data.")
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
Cc: <stable@vger.kernel.org> # v3.5+
Acked-by: Peter Rosin <peda@lysator.liu.se>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://patch.msgid.link/b3e46bbee781b3cb4029aca9a71316cc5e36dc17.1787502619.git.ahmadexp@gmail.com
The DMA channel request code currently warns about legacy DMA failures
when the channel name is not present in dma-names. This can report a
firmware lookup failure as a legacy DMA failure.
Furthermore, failures from the legacy DMA path are already reported by
find_candidate(), making these warnings redundant.
Only warn when the channel name is present in dma-names but the request
fails, avoiding misleading and duplicate error messages.
Fixes: 9167f26047 ("ASoC: soc-generic-dmaengine: Handle DMA channel request failures correctly")
Reported-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/all/aoyBuho270dTWYBL@jupiter.universe/
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260825081949.55537-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a compatible string for the mt6572 keypad, that is compatible with
mt6779.
Signed-off-by: Roman Vivchar <rva333@protonmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260814-6572-dt-keypad-v1-1-2ceff2373211@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
So as not to clobber any pre-programmed GPIO state in the execution
of its gpiochip ops, the driver caches things during probe time.
However, since those ops can be called both during and immediately after
the call to devm_gpiochip_add_data(), it is imperative that things are
cached before that. That's not the case right now, so reorder the two
steps to prevent any clobbering.
In the concrete example which motivated this change, a bootloader was
preconfiguring an important GPIO output to HIGH before booting the
kernel. Linux would then inadvertently set that output to LOW while
configuring a GPIO hog on a discrete GPIO line within the same 8-bit
bank (because the cached value was 0=LOW).
Fixes: ba9f507a1b ("Input: adp5588-keys - export unused GPIO pins")
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20260818-adp5588-gpio-cache-v1-1-650a2674fc0d@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
is_boot_sector_ntfs() checks the boot sector's sectors_per_cluster field
with a range test that rejects 0x81..0xf3 but accepts 0 and other
non-power-of-two counts. A zero value reaches parse_ntfs_boot_sector():
sectors_per_cluster_bits = ffs(sectors_per_cluster) - 1;
...
vol->cluster_size = vol->sector_size << sectors_per_cluster_bits;
ffs(0) is 0, so sectors_per_cluster_bits becomes (unsigned)-1 and the
shift is undefined:
UBSAN: shift-out-of-bounds in fs/ntfs/super.c:673:39
shift exponent 4294967295 is too large for 32-bit type 'int'
This change rejects any non-power-of-two value, since it feeds the
aforementioned shift via ffs() - 1, which only yields the correct shift for a
power of two.
Fixes: 6251f0b0de ("ntfs: update super block operations")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dennis Tighe <dennis.tighe@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry.
Fixes: 1e9ea7e044 ("Revert "fs: Remove NTFS classic"")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dennis Tighe <dennis.tighe@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The boot sector validation allows clusters_per_mft_record and
clusters_per_index_record to range from 0xE1 (-31) to 0xF7 (-9) when
interpreted as signed values. When these are used as negative shift
counts in expressions like `1 << -clusters_per_mft_record`, values
like 0xE1 cause `1 << 31`, which shifts into the sign bit of a 32-bit
signed integer, resulting in undefined behavior.
Fix by using unsigned shift (1U << ...) instead of signed shift.
This prevents undefined behavior while preserving the full valid
range of negative values (-31 to -9) that may appear in NTFS boot
sectors.
The encoding scheme uses negative values to represent record sizes
smaller than cluster_size: -log2(record_size). Common values include
-10 (1024 bytes) for mft_record_size and -12 (4096 bytes) for
index_record_size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_dio_zero_range() returns either 0 or a negative errno from
blkdev_issue_zeroout(); it never returns a positive value. The
zeroing failure check in ntfs_attr_fallocate() therefore never fired,
so a failed zeroing operation was silently ignored: the loop kept
going, the newly allocated clusters were folded into initialized_size
and the write could succeed leaving stale on-disk data.
Treat any nonzero return as an error and abort the allocation.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Assisted-by: atomcode:deepseek-v4-flash
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_new_attr_flags() passes the wrong MFT record to ntfs_attr_record_resize().
When the attribute is in an extent record, ctx->mrec points to the extent
but the function receives the base record pointer m, causing incorrect
size calculations in memmove.
Fix by passing ctx->mrec (the actual MFT record containing the attribute)
instead of m (the base MFT record) to ntfs_attr_record_resize().
Fixes: fc053f05ca ("ntfs: add reparse and ea operations")
Cc: stable@vger.kernel.org
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_put_super() and the remount-read-only path both clear the dirty bit
only when NVolErrors(vol) is false. ntfs_sync_fs() clears it
unconditionally, so any sync() on a volume that recorded an error marks
that volume clean. A volume without this set is then seen as not needing
recovery and it does not run one, so whatever went wrong is never repaired.
This change skips resetting the dirty bit when there are volume errors.
Reproduced on a volume whose $MFTMirr does not match $MFT, which sets the
error flag while leaving the mount read-write: after a write and a sync,
the on-disk volume flags read 0x0000 with this driver and 0x0001 with the
guard in place.
Fixes: 6251f0b0de ("ntfs: update super block operations")
Assisted-by: claude:claude-opus-5
Signed-off-by: Dennis Tighe <dennis.tighe@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When the rollback in __ntfs_cluster_free() fails, the recursive
call returns a negative errno and the subsequent
ntfs_dec_free_clusters(vol, delta) subtracts that negative value,
adding bogus clusters to the counter on an already-failing volume.
Skip the decrement when the rollback failed.
Fixes: 11ccc9107d ("ntfs: update runlist handling and cluster allocator")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed
whenever the error bookkeeping condition is false, which includes
cases where ntfs_bitmap_clear_run() actually failed - e.g. a second
run failing with the same errno as an earlier one, or any failure
after a non-ENOMEM error was already recorded. Since a failed
ntfs_bitmap_clear_run() rolls back its partial modifications, no
bits were cleared for that run, yet its length still inflates
vol->free_clusters, corrupting statfs output and the allocator's
free space gate.
Only count runs whose bitmap clear succeeded.
Fixes: 11ccc9107d ("ntfs: update runlist handling and cluster allocator")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too.
Fixes: 115380f9a2 ("ntfs: update mft operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_non_resident_attr_record_add() returns -1 at its put_err_out
label, which callers propagate as -EPERM to userspace.
Return the actual error code. Every path reaching the label has
err set to a negative errno.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_resident_attr_record_add() collapses every failure to -EIO at
its put_err_out label. This defeats the resident-to-non-resident
fallback in ntfs_attr_add(), which relies on seeing -ENOSPC to
convert the attribute when the MFT record has no room, and also
hides -EEXIST and -ENOMEM from callers.
Return the actual error code. Every path reaching the label has
err set to a negative errno.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When the value buffer passed to getxattr(2) for system.dos_attrib,
system.ntfs_attrib or system.ntfs_attrib_be is smaller than the
attribute value, ntfs_getxattr() returns -ENODATA, which tells
userspace the attribute does not exist. The xattr API expects
-ERANGE in this case, and ntfs_get_ea() in the same file already
returns -ERANGE for regular EAs.
Fixes: fc053f05ca ("ntfs: add reparse and ea operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller.
Fixes: fc053f05ca ("ntfs: add reparse and ea operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_reparse_tag_dt_types() returns PTR_ERR(vi) when ntfs_iget()
fails, but its return type is unsigned int and the caller passes
the value straight to dir_emit() as d_type. A stale or corrupt MFT
reference in a directory index thus makes readdir report a garbage
d_type value to userspace.
Return DT_UNKNOWN on lookup failure instead.
Fixes: fc053f05ca ("ntfs: add reparse and ea operations")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Commit 1c6ceeee6e ("drm/atomic: Fix memleak on ERESTARTSYS during
non-blocking commits") fixed a very similar issue when the event was
allocated by drm_atomic_helper_setup_commit() itself.
However, if the event is allocated in prepare_signaling(), it will also be
set to NULL in complete_signaling(), which prevents drm_crtc_commit from
being put in __drm_atomic_helper_crtc_destroy_state().
Dropping the reference when the event is set to NULL at
complete_signaling() fixes the leak.
The leak can be reproduced by sending a signal to the thread using
DRM_MODE_PAGE_FLIP_EVENT and using a sw_sync fence to cause the atomic
ioctl to block at drm_atomic_helper_wait_for_fences(). It happened both
with amdgpu and vkms.
Fixes: 24835e442f ("drm: reference count event->completion")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260727-drm_crtc_atomic_commit_leak-v1-1-23d9948a9d7c@igalia.com
Since file_priv can never be NULL at prepare_signaling() as it is only
called by drm_mode_atomic_ioctl(), remove the check.
If that was not the case, skipping the rest of the block here would cause
the drm_pending_vblank_event object to leak and fail to set up the fence in
case out_fence_ptr is set.
Since the check is unreachable, there is no possible leak.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260817-drm_atomic_bogus_check-v2-1-2b9e60f32a7e@igalia.com
decap_and_validate() pulls the outer SRv6 headers and makes the inner
packet the skb network header. The IPv6 control block still contains
values collected while parsing the outer packet, including nhoff and
extension-header flags.
End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6
input path. An unprivileged user can reach End.DT6 from a user and net
namespace by installing a local SID and injecting an outer packet with
Hop-by-Hop and Destination Options headers followed by an SRH and a
minimal inner IPv6 packet.
The outer extension headers leave a large nhoff in IP6CB. After
decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the
inner packet and reads beyond the skb head. KASAN reports:
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu
ip6_protocol_deliver_rcu+0x1118/0x1450
ip6_input_finish+0x11b/0x240
seg6_local_input_core+0xed/0x2e0
lwtunnel_input+0x1e9/0x4e0
ipv6_rthdr_rcv+0x525f/0x6c50
ip6_protocol_deliver_rcu+0xcb7/0x1450
Before clearing IP6CB for an inner IPv6 packet, save its incoming
interface index and L3 slave state. Restore both after the clear and set
nhoff to the inner IPv6 base-header nexthdr field.
Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can
replace skb_iif with the L3 master while IP6CB keeps the receiving
interface. Preserve IP6SKB_L3SLAVE for the same reason.
Fixes: d7a669dd2f ("ipv6: sr: add helper functions for seg6local")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
The way power sequencing works means that a call to pwrseq_power_on()
does not necessarily result in the pwrseq target being powered-on at
that time: it may have already been powered on before. Similarly: a call
to pwrseq_power_off() does not have to result in an actual powering off
of resources: there may still be other users that requested a power-on
before.
We will also introduce the concept of "non-controllable" pwrseq targets
soon which further increases the disconnect between the naming
convention and the actual semantics.
What consumers of pwrseq descriptors actually do is: they *vote* for a
powering on of a given target or retract that vote. These operations
could be called get/put in line with runtime PM but this could become
confusing since we already provide pwrseq_get/put() for a different
purpose. pwrseq_vote_on/off() also have been rejected as unusual in
the tree.
Change the name of the two functions to pwrseq_enable/disable() which
better reflects their purpose and semantics and also mirrors other
enable-counted resources like regulators and clocks. No functional change
intended.
If at any point users need to know *when* the exact power event happens,
we can provide that information in the form of a notifier.
Acked-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Acked-by: Alessio Belle <alessio.belle@imgtec.com> # imagination
Link: https://patch.msgid.link/20260731-pwrseq-vote-rename-v3-1-44e60b8be053@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less.
Fixes: ab3e023b1b ("drm/cirrus: rewrite and modernize driver.")
Assisted-by: Gemini:gemini-3.6-flash Gemini:gemini-3.1-pro-preview syzbot
Reported-by: syzbot+2442951a6abb004df963@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2442951a6abb004df963
Link: https://syzkaller.appspot.com/ai_job?id=ba262a3a-bccf-4ad8-a1b0-583c55d34fd6
Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260825120729.493611-1-sst@poczta.fm
The is_avivo() function has a logic error where it compares a constant
to another constant instead of checking the device parameter:
(PCI_VENDOR_ID_ATI_R600 >= 0x9400)
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: f496834e16 ("drm/ofdrm: Add per-model device function")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patch.msgid.link/20260731111729.703116-1-oushixiong1025@163.com
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: c8a17756c4 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patch.msgid.link/20260825104134.669676-1-oushixiong1025@163.com
f2fs_symlink()
1. f2fs_new_inode
2. f2fs_add_link
3. write_being|end to fill the symlink path
4. flush dirty pages and or checkpoint
Step 4 is nice to succeed, which doesn't become a reason to roll back
the created symlink. OTOH, if we get an error till step 3, don't leave
its dentry and its inode.
Reviewed-by: Chao Yu <chao@kernel.org>
Reviewed-by: Wenjie Qi <qiwenjie@xiaomi.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
ACOMP_REQUEST_ON_STACK() reserves only enough storage for the
synchronous fallback. When an async implementation is selected, callers
clone that stack request before retrying, but acomp_request_clone()
currently copies only the stack-sized object. The clone therefore has no
storage for the async provider request context, and providers such as QAT
write past the allocation through acomp_request_ctx(). KASAN does report
a slab OOB write.
Allocate a zeroed clone large enough for the runtime acomp request size,
copy only the bytes present in the source object, and preserve the
existing fallback-on-allocation-failure behavior. Use the runtime reqsize
because an implementation may adjust it during tfm initialization.
Fixes: 097c432caa ("crypto: acomp - Add ACOMP_REQUEST_CLONE")
Assisted-by: Codex:gpt-5
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit 9e91f8a6c8 ("ipmi:msghandler: Remove srcu for the
ipmi_interfaces list") dropped the synchronize_rcu() between unlinking
the command receivers from intf->cmd_rcvrs and freeing them, updating
only the comment that explains why the barrier is needed.
The cmd_rcvrs list is still traversed under plain RCU: find_cmd_rcvr()
walks it inside rcu_read_lock(), and handle_ipmb_get_msg_cmd() borrows
rcvr->user from that lookup within the same read-side section. Without
the grace period, _ipmi_destroy_user() can kfree() a cmd_rcvr while a
reader still holds a pointer to it, causing a use-after-free.
The rework only made srcu unnecessary for the interfaces list; the
cmd_rcvrs list still relies on plain RCU. Restore the synchronize_rcu()
before freeing the receivers.
Fixes: 9e91f8a6c8 ("ipmi:msghandler: Remove srcu for the ipmi_interfaces list")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
Message-ID: <20260825234630.1196170-1-gyf161023@gmail.com>
Signed-off-by: Corey Minyard <corey@minyard.net>
On GPU reset, dm_suspend() takes dc_lock and leaves it for dm_resume()
to drop. If amdgpu_dm_commit_zero_streams() or dm_dmub_hw_init() fails,
the function returns with the lock still held. The matching resume path
is then skipped, so every later dc_lock take hangs.
Release the cached DC state and unlock before returning the error.
Fixes: 3cf7a0bc87 ("drm/amd/display: Catch failures for amdgpu_dm_commit_zero_streams()")
Fixes: 2b6943df54 ("drm/amd/display: Pass up errors for reset GPU that fails to init HW")
Cc: stable@vger.kernel.org
Signed-off-by: Linkai Gong <gonglinkai@kylinos.cn>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Inside dcn6_calculate_flip_schedule(), GPUVMEnable is already checked in
the outer if block. But the same GPUVMEnable is checked again in two
inner if blocks inside it. Since GPUVMEnable is always true at that
point, the inner else branches that assign meta_row_height are never
reached.
Remove the redundant inner GPUVMEnable checks and directly assign
dpte_row_height, which is always the correct value here.
Fixes: 7f7d7ea1fa ("drm/amd/display: Add new sources for DCN6")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
