kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-16 22:39:48 +00:00
Code Issues Releases Packages Activity
linux/drivers/iio
History
Jean-Baptiste Maneyrol cf6ac3abb3 iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500 
commit 948588e25b upstream.

Starting from MPU6500, accelerometer dlpf is set in a separate
register named ACCEL_CONFIG_2.
Add this new register in the map and set it for the corresponding
chips.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
History 2017-06-24 07:11:17 +02:00
..
accel iio: accel: st_accel: fix LIS3LV02 reading and scaling 2017-01-12 11:39:21 +01:00
adc iio: adc: ti_am335x_adc: allocating too much in probe 2017-06-24 07:11:15 +02:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio: add resource managed triggered buffer init helpers 2016-09-04 15:42:46 +01:00
chemical iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value 2016-10-23 22:18:27 +01:00
common iio: hid-sensor: Store restore poll and hysteresis on S3 2017-05-25 15:44:41 +02:00
dac iio: dac: ad7303: fix channel description 2017-05-25 15:44:37 +02:00
dummy iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: bmg160: reset chip when probing 2017-04-12 12:41:11 +02:00
health iio: health: max30100: fixed parenthesis around FIFO count check 2017-02-09 08:08:30 +01:00
humidity iio: dht11: Use usleep_range instead of msleep for start signal 2017-02-09 08:08:30 +01:00
imu iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500 2017-06-24 07:11:17 +02:00
light iio: light: ltr501 Fix interchanged als/ps register field 2017-06-14 15:05:59 +02:00
magnetometer iio: magnetometer: ak8974: remove incorrect __exit markups 2017-03-30 09:41:25 +02:00
orientation iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) 2016-11-05 17:47:47 +00:00
potentiometer iio: potentiometer: Fix typo in Kconfig 2016-07-03 12:40:01 +01:00
pressure iio: st_pressure: Fix data sign 2017-06-24 07:11:14 +02:00
proximity iio: proximity: as3935: recalibrate RCO after resume 2017-06-24 07:11:14 +02:00
temperature iio: maxim_thermocouple: detect invalid storage size in read() 2016-11-13 10:08:32 +01:00
trigger iio:trigger: Experimental kthread tight loop trigger (thread only) 2016-06-03 13:18:44 +01:00
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
iio_core_trigger.h iio: fix semicolon in io_core_trigger.h 2013-08-03 18:40:32 +01:00
industrialio-buffer.c iio: ensure ret is initialized to zero before entering do loop 2016-09-05 21:00:14 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c Second set of iio new device support, features and cleanups for the 4.9 cycle. 2016-09-14 20:42:03 +02:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: helpers to determine own trigger 2016-09-10 16:49:14 +01:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: core: Add devm_ APIs for iio_channel_{get,release}_all 2016-04-19 19:58:15 +01:00
Kconfig iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
Makefile iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00