Commit graph

766,493 commits

Author SHA1 Message Date
Martin Blumenstingl
324e46cee1 dt-bindings: phy: Add support for the USB3 PHY on Amlogic Meson GXL SoCs
Amlogic Meson GXL SoCs use a dwc3 controller with two (GXM - a variant
for GXL, has three) USB2 ports. The first USB2 port supports host and
peripheral (also called "device") mode.
While the dwc3 controller has no USB3 port enabled we still need the
USB3 PHY to be initialized. Otherwise high-speed USB transfers (for
example with a USB flash drive) may time out (most often seen on boards
with mainline u-boot, where the bootloader does not initialize the USB3
PHY registers).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:44 +05:30
Alexander Monakov
ae3f672cab phy: berlin-usb: adjust USB_PHY_RX_CTRL init flags
Make the value written into the USB_PHY_RX_CTRL configuration register
match 0xAA79 value written by manufacturer-supplied kernels for Sony
NSZ-GS7 (Berlin2 SoC), Google Chromecast and Valve Steam Link (BG2CD).

This fixes timeouts communicating to the internal hub on Steam Link.

Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:43 +05:30
Chunfeng Yun
c55fbcb8cf dt-bindings: phy-mtk-tphy: add properties for U2 slew rate calibrate
Add two properties of ref_clk and coefficient used by U2 slew rate
calibrate which may vary on different SoCs

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:43 +05:30
Chunfeng Yun
8833ebf4f8 phy: phy-mtk-tphy: add configurable parameters for slew rate calibrate
There are two parameters, ref_clk and coefficient, for U2 slew rate
calibrate which may vary on different SoCs, here allow them to be
configurable

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:42 +05:30
Chunfeng Yun
4036325609 phy: phy-mtk-tphy: keep default value of mcu_bus_ck_gate_en
The default value of mcu_bus_ck_gate_en is 1, if clear it, will
prevent system to enter deep idle mode, so keep its default value
and without affecting PCIe function.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:42 +05:30
Alexey Khoroshilov
124380cb0e phy: lpc18xx-usb-otg: error handling in lpc18xx_usb_otg_phy_power_on()
If regmap_update_bits() fails in lpc18xx_usb_otg_phy_power_on(),
lpc->clk is left enabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16 13:40:42 +05:30
Greentime Hu
6fc61ee694 nds32: To use the generic dump_stack()
Use the generic dump_stack() instead of nds32 one because they are doing
the same thing.

Signed-off-by: Greentime Hu <greentime@andestech.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-03-16 15:45:23 +08:00
Greentime Hu
e115807657 nds32: fix building failed if using elf toolchain.
OUTPUT_FORMAT is not necessary here and the elf toolchain doesn't
support these formats. Since kernel should be built pass with elf
or Linux toolchain. This can be removed from vdso.ld.S

These are the built failed messages.
  VDSOL   arch/nds32/kernel/vdso/vdso.so.dbg
  /home/users/greentime/tmp/nds32le-elf-newlib-v3-upstream-b224/bin/../lib/gcc/nds32le-elf/8.0.1/../../../../nds32le-elf/bin/ld:
  target elf32-nds32le-linux not found
  collect2: error: ld returned 1 exit status
  make[1]: *** [arch/nds32/kernel/vdso/vdso.so.dbg] Error 1
  make: *** [vdso_prepare] Error 2

Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-03-16 15:45:22 +08:00
Greentime Hu
c601a89115 nios2: add ioremap_nocache declaration before include asm-generic/io.h.
A commit for the nds32 architecture bootstrap("asm-generic/io.h:
move ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt out of ifndef
CONFIG_MMU") will move the ioremap_nocache out of the CONFIG_MMU ifdef.
This means that in order to suppress re-definition errors we need to
setup #define's before importing asm-generic/io.h.

Signed-off-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Tobias Klauser <tklauser@distanz.ch>
2018-03-16 15:45:21 +08:00
Greentime Hu
d78a62fb34 nds32: fix building failed if using older version gcc.
It will be built failed because these options are not supported by older
version gcc.

Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-03-16 15:45:20 +08:00
Joe Perches
99a954874e drm: Reduce object size of DRM_ERROR and DRM_DEBUG uses
drm_printk is used for both DRM_ERROR and DRM_DEBUG with unnecessary
arguments that can be removed by creating separate functins.

Create specific functions for these calls to reduce x86/64 defconfig
size by ~20k.

Modify the existing macros to use the specific calls.

new:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1876562	  44542	    995	1922099	 1d5433	(TOTALS)

old:
$ size -t drivers/gpu/drm/built-in.a | tail -1
1897565	  44542	    995	1943102	 1da63e	(TOTALS)

Miscellanea:

o intel_display requires a change to use the specific calls.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/016b5cb84cede20fd0f91ed6965421d99fd5f2ce.1520978414.git.joe@perches.com
2018-03-16 08:41:57 +01:00
Evgeniy Didin
47b7de2f6c mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs
It was found that in IDMAC mode after soft-reset driver switches
to PIO mode.

That's what happens in case of DTO timeout overflow calculation failure:
1. soft-reset is called
2. driver restarts dma
3. descriptors states are checked, one of descriptor is owned by the IDMAC.
4. driver can't use DMA and then switches to PIO mode.

Failure was already fixed in:
https://www.spinics.net/lists/linux-mmc/msg48125.html.

Behaviour while soft-reset is not something we except or
even want to happen. So we switch from dw_mci_idmac_reset
to dw_mci_idmac_init, so descriptors are cleaned before starting dma.

And while at it explicitly zero des0 which otherwise might
contain garbage as being allocated by dmam_alloc_coherent().

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-03-16 08:38:54 +01:00
Taehee Yoo
46c0ef6e1e xfrm: fix rcu_read_unlock usage in xfrm_local_error
In the xfrm_local_error, rcu_read_unlock should be called when afinfo
is not NULL. because xfrm_state_get_afinfo calls rcu_read_unlock
if afinfo is NULL.

Fixes: af5d27c4e1 ("xfrm: remove xfrm_state_put_afinfo")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-03-16 08:26:02 +01:00
Dave Airlie
3a1b5de36f Only GVT fixes:
- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
 - OA context fix for vGPU profiling (Min)
 - privilege batch buffer reloc fix (Fred)
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaqwRYAAoJEPpiX2QO6xPKZT0H/30rwEPNL0Z9LMrZY/WC4Yr8
 0Hbc7jn0pYgCV+Cm8E1OPwQv2lqZMx5VAPV7ggQqaVjQam629NVODVUVNyMorQ7l
 uy3kbi3vAcazuvaApUchMDppfl919FP5QXFKaEm8HU3C8oROaKO6lZKc6OJFd1Bu
 eNLwg3FqI0JXRUqfggzyaqtpV8bMXzLVeQh98wlGbpkEF0yvXlTPProLJx4WX2kq
 /8OULi2k7g9QxOd8S9l3TdSHpOJKPzoDecvGW6WFM+0q5POs+Ybk69yU32irt/Fk
 2dNbqn8GgPXTkFMaBzlBFqq6Kgh4y1b6eQDjQC1oZGOyjK/HwtNteZHREEzg15A=
 =fg6j
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

Only GVT fixes:
- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)

* tag 'drm-intel-fixes-2018-03-15' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915/gvt: fix user copy warning by whitelist workload rb_tail field
  drm/i915/gvt: Correct the privilege shadow batch buffer address
  drm/i915/gvt: keep oa config in shadow ctx
  drm/i915/gvt: Add runtime_pm_get/put into gvt_switch_mmio
2018-03-16 12:51:35 +10:00
Dan Williams
dc9e0a9347 acpi, numa: fix pxm to online numa node associations
Commit 99759869fa "acpi: Add acpi_map_pxm_to_online_node()" added
support for mapping a given proximity to its nearest, by SLIT distance,
online node. However, it sometimes returns unexpected results due to the
fact that it switches from comparing the PXM node to the last node that
was closer than the current max.

    for_each_online_node(n) {
            dist = node_distance(node, n);
            if (dist < min_dist) {
                    min_dist = dist;
                    node = n;	<---- from this point we're using the
				      wrong node for node_distance()


Fixes: 99759869fa ("acpi: Add acpi_map_pxm_to_online_node()")
Cc: <stable@vger.kernel.org>
Reviewed-by: Toshi Kani <toshi.kani@hp.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-15 19:49:14 -07:00
Leon Romanovsky
2975d5de64 RDMA/ucma: Check AF family prior resolving address
Garbage supplied by user will cause to UCMA module provide zero
memory size for memcpy(), because it wasn't checked, it will
produce unpredictable results in rdma_resolve_addr().

[   42.873814] BUG: KASAN: null-ptr-deref in rdma_resolve_addr+0xc8/0xfb0
[   42.874816] Write of size 28 at addr 00000000000000a0 by task resaddr/1044
[   42.876765]
[   42.876960] CPU: 1 PID: 1044 Comm: resaddr Not tainted 4.16.0-rc1-00057-gaa56a5293d7e #34
[   42.877840] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[   42.879691] Call Trace:
[   42.880236]  dump_stack+0x5c/0x77
[   42.880664]  kasan_report+0x163/0x380
[   42.881354]  ? rdma_resolve_addr+0xc8/0xfb0
[   42.881864]  memcpy+0x34/0x50
[   42.882692]  rdma_resolve_addr+0xc8/0xfb0
[   42.883366]  ? deref_stack_reg+0x88/0xd0
[   42.883856]  ? vsnprintf+0x31a/0x770
[   42.884686]  ? rdma_bind_addr+0xc40/0xc40
[   42.885327]  ? num_to_str+0x130/0x130
[   42.885773]  ? deref_stack_reg+0x88/0xd0
[   42.886217]  ? __read_once_size_nocheck.constprop.6+0x10/0x10
[   42.887698]  ? unwind_get_return_address_ptr+0x50/0x50
[   42.888302]  ? replace_slot+0x147/0x170
[   42.889176]  ? delete_node+0x12c/0x340
[   42.890223]  ? __radix_tree_lookup+0xa9/0x160
[   42.891196]  ? ucma_resolve_ip+0xb7/0x110
[   42.891917]  ucma_resolve_ip+0xb7/0x110
[   42.893003]  ? ucma_resolve_addr+0x190/0x190
[   42.893531]  ? _copy_from_user+0x5e/0x90
[   42.894204]  ucma_write+0x174/0x1f0
[   42.895162]  ? ucma_resolve_route+0xf0/0xf0
[   42.896309]  ? dequeue_task_fair+0x67e/0xd90
[   42.897192]  ? put_prev_entity+0x7d/0x170
[   42.897870]  ? ring_buffer_record_is_on+0xd/0x20
[   42.898439]  ? tracing_record_taskinfo_skip+0x20/0x50
[   42.899686]  __vfs_write+0xc4/0x350
[   42.900142]  ? kernel_read+0xa0/0xa0
[   42.900602]  ? firmware_map_remove+0xdf/0xdf
[   42.901135]  ? do_task_dead+0x5d/0x60
[   42.901598]  ? do_exit+0xcc6/0x1220
[   42.902789]  ? __fget+0xa8/0xf0
[   42.903190]  vfs_write+0xf7/0x280
[   42.903600]  SyS_write+0xa1/0x120
[   42.904206]  ? SyS_read+0x120/0x120
[   42.905710]  ? compat_start_thread+0x60/0x60
[   42.906423]  ? SyS_read+0x120/0x120
[   42.908716]  do_syscall_64+0xeb/0x250
[   42.910760]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   42.912735] RIP: 0033:0x7f138b0afe99
[   42.914734] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001
[   42.917134] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99
[   42.919487] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004
[   42.922393] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000
[   42.925266] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0
[   42.927570] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0
[   42.930047]
[   42.932681] Disabling lock debugging due to kernel taint
[   42.934795] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
[   42.936939] IP: memcpy_erms+0x6/0x10
[   42.938864] PGD 80000001bea92067 P4D 80000001bea92067 PUD 1bea96067 PMD 0
[   42.941576] Oops: 0002 [#1] SMP KASAN PTI
[   42.943952] CPU: 1 PID: 1044 Comm: resaddr Tainted: G    B 4.16.0-rc1-00057-gaa56a5293d7e #34
[   42.946964] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
[   42.952336] RIP: 0010:memcpy_erms+0x6/0x10
[   42.954707] RSP: 0018:ffff8801c8b479c8 EFLAGS: 00010286
[   42.957227] RAX: 00000000000000a0 RBX: ffff8801c8b47ba0 RCX: 000000000000001c
[   42.960543] RDX: 000000000000001c RSI: ffff8801c8b47bbc RDI: 00000000000000a0
[   42.963867] RBP: ffff8801c8b47b60 R08: 0000000000000000 R09: ffffed0039168ed1
[   42.967303] R10: 0000000000000001 R11: ffffed0039168ed0 R12: ffff8801c8b47bbc
[   42.970685] R13: 00000000000000a0 R14: 1ffff10039168f4a R15: 0000000000000000
[   42.973631] FS:  00007f138b79a700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[   42.976831] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   42.979239] CR2: 00000000000000a0 CR3: 00000001be908002 CR4: 00000000003606a0
[   42.982060] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   42.984877] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   42.988033] Call Trace:
[   42.990487]  rdma_resolve_addr+0xc8/0xfb0
[   42.993202]  ? deref_stack_reg+0x88/0xd0
[   42.996055]  ? vsnprintf+0x31a/0x770
[   42.998707]  ? rdma_bind_addr+0xc40/0xc40
[   43.000985]  ? num_to_str+0x130/0x130
[   43.003410]  ? deref_stack_reg+0x88/0xd0
[   43.006302]  ? __read_once_size_nocheck.constprop.6+0x10/0x10
[   43.008780]  ? unwind_get_return_address_ptr+0x50/0x50
[   43.011178]  ? replace_slot+0x147/0x170
[   43.013517]  ? delete_node+0x12c/0x340
[   43.016019]  ? __radix_tree_lookup+0xa9/0x160
[   43.018755]  ? ucma_resolve_ip+0xb7/0x110
[   43.021270]  ucma_resolve_ip+0xb7/0x110
[   43.023968]  ? ucma_resolve_addr+0x190/0x190
[   43.026312]  ? _copy_from_user+0x5e/0x90
[   43.029384]  ucma_write+0x174/0x1f0
[   43.031861]  ? ucma_resolve_route+0xf0/0xf0
[   43.034782]  ? dequeue_task_fair+0x67e/0xd90
[   43.037483]  ? put_prev_entity+0x7d/0x170
[   43.040215]  ? ring_buffer_record_is_on+0xd/0x20
[   43.042990]  ? tracing_record_taskinfo_skip+0x20/0x50
[   43.045595]  __vfs_write+0xc4/0x350
[   43.048624]  ? kernel_read+0xa0/0xa0
[   43.051604]  ? firmware_map_remove+0xdf/0xdf
[   43.055379]  ? do_task_dead+0x5d/0x60
[   43.058000]  ? do_exit+0xcc6/0x1220
[   43.060783]  ? __fget+0xa8/0xf0
[   43.063133]  vfs_write+0xf7/0x280
[   43.065677]  SyS_write+0xa1/0x120
[   43.068647]  ? SyS_read+0x120/0x120
[   43.071179]  ? compat_start_thread+0x60/0x60
[   43.074025]  ? SyS_read+0x120/0x120
[   43.076705]  do_syscall_64+0xeb/0x250
[   43.079006]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   43.081606] RIP: 0033:0x7f138b0afe99
[   43.083679] RSP: 002b:00007f138b799e98 EFLAGS: 00000287 ORIG_RAX: 0000000000000001
[   43.086802] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f138b0afe99
[   43.089989] RDX: 000000000000002e RSI: 0000000020000c40 RDI: 0000000000000004
[   43.092866] RBP: 00007f138b799ec0 R08: 00007f138b79a700 R09: 0000000000000000
[   43.096233] R10: 00007f138b79a700 R11: 0000000000000287 R12: 00007f138b799fc0
[   43.098913] R13: 0000000000000000 R14: 00007ffdbae757c0 R15: 00007f138b79a9c0
[   43.101809] Code: 90 90 90 90 90 eb 1e 0f 1f 00 48 89 f8 48 89 d1 48
c1 e9 03 83 e2 07 f3 48 a5 89 d1 f3 a4 c3 66 0f 1f 44 00 00 48 89 f8 48
89 d1 <f3> a4 c3 0f 1f 80 00 00 00 00 48 89 f8 48 83 fa 20 72 7e 40 38
[   43.107950] RIP: memcpy_erms+0x6/0x10 RSP: ffff8801c8b479c8

Reported-by: <syzbot+1d8c43206853b369d00c@syzkaller.appspotmail.com>
Fixes: 7521663857 ("RDMA/cma: Export rdma cm interface to userspace")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 20:12:38 -06:00
Dave Airlie
d4487b57a4 Merge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-fixes
nouveau regression fixes.

* 'linux-4.16' of git://github.com/skeggsb/linux:
  drm/nouveau/bl: fix backlight regression
  drm/nouveau/bl: Fix oops on driver unbind
  drm/nouveau/mmu: ALIGN_DOWN correct variable
2018-03-16 12:06:17 +10:00
Linus Torvalds
df09348f78 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:

 - backport-friendly part of lock_parent() race fix

 - a fix for an assumption in the heurisic used by path_connected() that
   is not true on NFS

 - livelock fixes for d_alloc_parallel()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: Teach path_connected to handle nfs filesystems with multiple roots.
  fs: dcache: Use READ_ONCE when accessing i_dir_seq
  fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
  lock_parent() needs to recheck if dentry got __dentry_kill'ed under it
2018-03-15 18:57:14 -07:00
Karol Herbst
9e75dc61ea drm/nouveau/bl: fix backlight regression
Fixes: 3c66c87dc9 ("drm/nouveau/disp: remove hw-specific customisation
of output paths")
Suggested-by: Ben Skeggs <skeggsb@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16 11:55:05 +10:00
Lukas Wunner
76f2e2bc62 drm/nouveau/bl: Fix oops on driver unbind
Unbinding nouveau on a dual GPU MacBook Pro oopses because we iterate
over the bl_connectors list in nouveau_backlight_exit() but skipped
initializing it in nouveau_backlight_init().  Stacktrace for posterity:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
    IP: nouveau_backlight_exit+0x2b/0x70 [nouveau]
    nouveau_display_destroy+0x29/0x80 [nouveau]
    nouveau_drm_unload+0x65/0xe0 [nouveau]
    drm_dev_unregister+0x3c/0xe0 [drm]
    drm_put_dev+0x2e/0x60 [drm]
    nouveau_drm_device_remove+0x47/0x70 [nouveau]
    pci_device_remove+0x36/0xb0
    device_release_driver_internal+0x157/0x220
    driver_detach+0x39/0x70
    bus_remove_driver+0x51/0xd0
    pci_unregister_driver+0x2a/0xa0
    nouveau_drm_exit+0x15/0xfb0 [nouveau]
    SyS_delete_module+0x18c/0x290
    system_call_fast_compare_end+0xc/0x6f

Fixes: b53ac1ee12 ("drm/nouveau/bl: Do not register interface if Apple GMUX detected")
Cc: stable@vger.kernel.org # v4.10+
Cc: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-03-16 11:55:05 +10:00
Māris Nartišs
da5e45e619 drm/nouveau/mmu: ALIGN_DOWN correct variable
Commit 7110c89bb8852ff8b0f88ce05b332b3fe22bd11e ("mmu: swap out round
for ALIGN") replaced two calls to round/rounddown with ALIGN/ALIGN_DOWN,
but erroneously applied ALIGN_DOWN to a different variable (addr) and left
intended variable (tail) not rounded/ALIGNed.

As a result screen corruption, X lockups are observable. An example of kernel
log of affected system with NV98 card where it was bisected:

nouveau 0000:01:00.0: gr: TRAP_M2MF 00000002 [IN]
nouveau 0000:01:00.0: gr: TRAP_M2MF 00320951 400007c0 00000000 04000000
nouveau 0000:01:00.0: gr: 00200000 [] ch 1 [000fbbe000 DRM] subc 4 class 5039
mthd 0100 data 00000000
nouveau 0000:01:00.0: fb: trapped read at 0040000000 on channel 1
[0fbbe000 DRM]
engine 00 [PGRAPH] client 03 [DISPATCH] subclient 04 [M2M_IN] reason 00000006
[NULL_DMAOBJ]

Fixes bug 105173 ("[MCP79][Regression] Unhandled NULL pointer dereference in
nvkm_object_unmap since kernel 4.15")
https://bugs.freedesktop.org/show_bug.cgi?id=105173

Fixes: 7110c89bb885 ("mmu: swap out round for ALIGN ")
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Maris Nartiss <maris.nartiss@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org # v4.15+
2018-03-16 11:55:04 +10:00
Fabio Estevam
326e7ba992 ARM: dts: imx6ul-isiot: Pass the required '#sound-dai-cells'
DTC now warns about missing #sound-dai-cells:

/sound/simple-audio-card,codec: Missing property '#sound-dai-cells' in
node /soc/aips-bus@2100000/i2c@21a0000/codec@a or bad phandle
(referred from sound-dai[0])

Pass the required '#sound-dai-cells' property to fix it.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16 09:13:38 +08:00
Fabio Estevam
863c53fcff ARM: dts: imx6-phytec: Use the standard 'stdout-path' property
Use the standard 'stdout-path' property to fix the following DTC warnings:

arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dtb: Warning
(chosen_node_stdout_path): /chosen:linux,stdout-path: Use
'stdout-path' instead

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-16 09:13:32 +08:00
Eric W. Biederman
95dd77580c fs: Teach path_connected to handle nfs filesystems with multiple roots.
On nfsv2 and nfsv3 the nfs server can export subsets of the same
filesystem and report the same filesystem identifier, so that the nfs
client can know they are the same filesystem.  The subsets can be from
disjoint directory trees.  The nfsv2 and nfsv3 filesystems provides no
way to find the common root of all directory trees exported form the
server with the same filesystem identifier.

The practical result is that in struct super s_root for nfs s_root is
not necessarily the root of the filesystem.  The nfs mount code sets
s_root to the root of the first subset of the nfs filesystem that the
kernel mounts.

This effects the dcache invalidation code in generic_shutdown_super
currently called shrunk_dcache_for_umount and that code for years
has gone through an additional list of dentries that might be dentry
trees that need to be freed to accomodate nfs.

When I wrote path_connected I did not realize nfs was so special, and
it's hueristic for avoiding calling is_subdir can fail.

The practical case where this fails is when there is a move of a
directory from the subtree exposed by one nfs mount to the subtree
exposed by another nfs mount.  This move can happen either locally or
remotely.  With the remote case requiring that the move directory be cached
before the move and that after the move someone walks the path
to where the move directory now exists and in so doing causes the
already cached directory to be moved in the dcache through the magic
of d_splice_alias.

If someone whose working directory is in the move directory or a
subdirectory and now starts calling .. from the initial mount of nfs
(where s_root == mnt_root), then path_connected as a heuristic will
not bother with the is_subdir check.  As s_root really is not the root
of the nfs filesystem this heuristic is wrong, and the path may
actually not be connected and path_connected can fail.

The is_subdir function might be cheap enough that we can call it
unconditionally.  Verifying that will take some benchmarking and
the result may not be the same on all kernels this fix needs
to be backported to.  So I am avoiding that for now.

Filesystems with snapshots such as nilfs and btrfs do something
similar.  But as the directory tree of the snapshots are disjoint
from one another and from the main directory tree rename won't move
things between them and this problem will not occur.

Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes: 397d425dc2 ("vfs: Test for and handle paths that are unreachable from their mnt_root")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-03-15 18:48:38 -04:00
Rodrigo Vivi
05b429a8ee Merge tag 'gvt-fixes-2018-03-15' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2018-03-15

- Two warnings fix for runtime pm and usr copy (Xiong, Zhenyu)
- OA context fix for vGPU profiling (Min)
- privilege batch buffer reloc fix (Fred)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180315100023.5n5a74afky6qinoh@zhen-hp.sh.intel.com
2018-03-15 15:37:57 -07:00
Guy Levi
6d06c9aa38 IB/mlx4: Add Scatter FCS support over WQ creation
As a default, for Ethernet packets, the device scatters only the payload
of ingress packets. The scatter FCS feature lets the user to get the FCS
(Ethernet's frame check sequence) in the received WR's buffer as a 4
Bytes trailer following the packet's payload.

Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:05 -06:00
Yishai Hadas
9c71172c4a IB/mlx4: Report TSO capabilities
Report to the user area the TSO device capabilities, it includes the
max_tso size and the QP types that support it.

The TSO is applicable only when when of the ports is ETH and the device
supports it.

uresp logic around rss_caps is updated to fix a till-now harmless bug
computing the length of the structure to copy. The code did not handle the
implicit padding before rss_caps correctly. This is necessay to copy
tss_caps successfully.

Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:05 -06:00
Henry Orosco
546b1452fd i40iw: Tear-down connection after CQP Modify QP failure
There is no explicit tear-down sequence initiated on
connections if the Control QP OP, Modify QP to close,
fails. Fix this by triggering a driver generated
Asynchronous Event (AE) on Modify QP failures and
tear-down the connection on receipt of the AE.

This fix can be generalized to other Modify QP failures
(i.e. RTS->TERM, IDLE->RTS, etc) as any modify failure
will require a connection tear-down.

Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:05 -06:00
Henry Orosco
a8b9234b12 i40iw: Refactor of driver generated AEs
The flush CQP OP can be used to optionally generate
Asynchronous Events (AEs) in addition to QP flush.
Consolidate all HW AE generation code under a new
function i40iw_gen_ae which use the flush CQP OP
to only generate AEs.

Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:04 -06:00
Jason Gunthorpe
7f86260b5f RDMA/cxgb4: Use structs to describe the uABI instead of opencoding
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.

Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:04 -06:00
Jason Gunthorpe
633fb4d9fd RDMA/hns: Use structs to describe the uABI instead of opencoding
Open coding a loose value is not acceptable for describing the uABI in
RDMA. Provide the missing struct.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:04 -06:00
Jason Gunthorpe
9a657b4c4a RDMA/i40iw: Move uapi header to include/uapi
All of these defines are part of the uABI for the driver, this
header duplicates providers/i40iw/i40iw-abi.h in rdma-core.

Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:03 -06:00
Jason Gunthorpe
48962f5c6f RDMA/mlx4: Move flag constants to uapi header
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps)
and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via
mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to
userspace and form part of the uAPI.

Move them to the uapi header where they belong.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:03 -06:00
Jason Gunthorpe
0c43ab371b RDMA/rxe: Use structs to describe the uABI instead of opencoding
Open coding pointer math is not acceptable for describing the uABI in
RDMA. Provide structs for all the cases.

The udata is casted to the struct as close to the verbs entry point
as possible for maximum clarity. Function signatures and so forth
are revised to allow for this.

Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:02 -06:00
Jason Gunthorpe
b92ec0fe32 RDMA/rxe: Get rid of confusing udata parameter to rxe_cq_chk_attr
It isn't used and it couldn't possibly ever be used correctly.

Tested-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:58:02 -06:00
Tejun Heo
95da6e96f1 RDMAVT: Fix synchronization around percpu_ref
rvt_mregion uses percpu_ref for reference counting and RCU to protect
accesses from lkey_table.  When a rvt_mregion needs to be freed, it
first gets unregistered from lkey_table and then rvt_check_refs() is
called to wait for in-flight usages before the rvt_mregion is freed.

rvt_check_refs() seems to have a couple issues.

* It has a fast exit path which tests percpu_ref_is_zero().  However,
  a percpu_ref reading zero doesn't mean that the object can be
  released.  In fact, the ->release() callback might not even have
  started executing yet.  Proceeding with freeing can lead to
  use-after-free.

* lkey_table is RCU protected but there is no RCU grace period in the
  free path.  percpu_ref uses RCU internally but it's sched-RCU whose
  grace periods are different from regular RCU.  Also, it generally
  isn't a good idea to depend on internal behaviors like this.

To address the above issues, this patch removes the fast exit and adds
an explicit synchronize_rcu().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: linux-rdma@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:38:19 -06:00
Sinan Kaya
561e5d4896 RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs
Code includes wmb() followed by writel() in multiple places. writel()
already has a barrier on some architectures like arm64.

This ends up CPU observing two barriers back to back before executing the
register write.

Since code already has an explicit barrier call, changing writel() to
writel_relaxed().

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:35:44 -06:00
Yixian Liu
7b48221cf4 RDMA/hns: Fix cqn type and init resp
This patch changes the type of cqn from u32 to u64 to keep
userspace and kernel consistent, initializes resp both for
cq and qp to zeros, and also changes the condition judgment
of outlen considering future caps extension.

Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Fixes: e088a685ea (hns: Support rq record doorbell for the user space)
Fixes: 9b44703d0a (hns: Support cq record doorbell for the user space)
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Shaobo Xu <xushaobo2@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:34:26 -06:00
Parav Pandit
e41a7c4194 IB/core: Move rdma_addr_find_l2_eth_by_grh to core_priv.h
Before commit [1], rdma_addr_find_l2_eth_by_grh() was an exported function
and therefore declaration in include/rdma/ib_addr.h was fine.

But now that its scope is limited to ib_core module, its better to have it
in core_priv.h.

[1] commit 1060f86534 ("IB/{core/cm}: Fix generating a return AH for
RoCEE")

Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15 15:33:39 -06:00
Felix Kuehling
374200b154 drm/amdkfd: Add module option for testing large-BAR functionality
Simulate large-BAR system by exporting only visible memory. This
limits the amount of available VRAM to the size of the BAR, but
enables CPU access to VRAM.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:53 -04:00
Felix Kuehling
0fc8011f89 drm/amdkfd: Kmap event page for dGPUs
The events page must be accessible in user mode by the GPU and CPU
as well as in kernel mode by the CPU. On dGPUs user mode virtual
addresses are managed by the Thunk's GPU memory allocation code.
Therefore we can't allocate the memory in kernel mode like we do
on APUs. But KFD still needs to map the memory for kernel access.
To facilitate this, the Thunk provides the buffer handle of the
events page to KFD when creating the first event.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:52 -04:00
Felix Kuehling
5ec7e02854 drm/amdkfd: Add ioctls for GPUVM memory management
v2:
* Fix error handling after kfd_bind_process_to_device in
  kfd_ioctl_map_memory_to_gpu
v3:
* Add ioctl to acquire VM from a DRM FD
v4:
* Return number of successful map/unmap operations in failure cases
* Facilitate partial retry after failed map/unmap
* Added comments with parameter descriptions to new APIs
* Defined AMDKFD_IOC_FREE_MEMORY_OF_GPU write-only

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:51 -04:00
Felix Kuehling
552764b680 drm/amdkfd: Add TC flush on VMID deallocation for Hawaii
On GFX7 the CP does not perform a TC flush when queues are unmapped.
To avoid TC eviction from accessing an invalid VMID, flush it
explicitly before releasing a VMID.

v2: Fix unnecessary list_for_each_entry_safe
v3: Moved allocation to kfd_process_device_init_vm

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:50 -04:00
Felix Kuehling
f35751b870 drm/amdkfd: Allocate CWSR trap handler memory for dGPUs
Add helpers for allocating GPUVM memory in kernel mode and use them
to allocate memory for the CWSR trap handler.

v2: Use dev instead of pdd->dev in kfd_process_free_gpuvm
v3:
* Cleaned up and simplified kfd_process_alloc_gpuvm
* Moved allocation for dGPU to kfd_process_device_init_vm

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:49 -04:00
Felix Kuehling
52b29d7334 drm/amdkfd: Add per-process IDR for buffer handles
Also used for cleaning up on process termination.

v2: Refactored cleanup on process termination

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:48 -04:00
Felix Kuehling
d01994c24c drm/amdkfd: Aperture setup for dGPUs
Set up the GPUVM aperture for SVM (shared virtual memory) that allows
sharing a part of virtual address space between GPUs and CPUs.

Report the size of the GPUVM aperture that is supported by KGD accurately.

The low part of the GPUVM aperture is reserved for kernel use. This is
for kernel-allocated buffers that are only accessed on the GPU:
- CWSR trap handler
- IB for submitting commands in user-mode context from kernel mode

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:47 -04:00
Felix Kuehling
c7bcbfa4f8 drm/amdkfd: Remove limit on number of GPUs
Currently the number of GPUs is limited by aperture placement options
available on GFX7 and GFX8 hardware. This limitation is not necessary.
Scratch and LDS represent per-work-item and per-work-group storage
respectively. Different work-items and work-groups use the same virtual
address to access their own data. Work running on different GPUs is by
definition in different work-groups (different dispatches, in fact).
That means the same virtual addresses can be used for these apertures
on different GPUs.

Add a new AMDKFD_IOC_GET_PROCESS_APERTURES_NEW ioctl that removes the
artificial limitation on the number of GPUs that can be supported. The
new ioctl allows user mode to query the number of GPUs to allocate
enough memory for all GPUs to be reported.

This deprecates AMDKFD_IOC_GET_PROCESS_APERTURES.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:46 -04:00
Oak Zeng
7c9b717196 drm/amdkfd: Populate DRM render device minor
Populate DRM render device minor in kfd topology

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:45 -04:00
Felix Kuehling
b84394e206 drm/amdkfd: Create KFD VMs on demand
Instead of creating all VMs on process creation, create them when
a process is bound to a device. This will later allow registering
an existing VM from a DRM render node FD at runtime, before the
process is bound to the device. This way the render node VM can be
used for KFD instead of creating our own redundant VM.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:44 -04:00
Felix Kuehling
ede0dd86f4 drm/amdgpu: Add kfd2kgd interface to acquire an existing VM
This allows acquiring an existing VM from a render node FD to use it
for a compute process.

Such VMs get destroyed when the original file descriptor is released.
Added a callback from amdgpu_vm_fini to handle KFD VM destruction
correctly in this case.

v2:
* Removed vm->vm_context check in amdgpu_amdkfd_gpuvm_destroy_cb,
  check vm->process_info earlier instead

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2018-03-15 17:27:43 -04:00