commit 6ab3d4353b upstream.
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9bc6be0f upstream.
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80614c5098 upstream.
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 28695ca09d upstream.
When an eGPU is unplugged the KFD topology should also be destroyed
for that GPU. This never happens because the fini_sw callbacks never
get to run. Run them manually before calling amdgpu_device_ip_fini_early()
when a device has already been disconnected.
This location is intentionally chosen to make sure that the kfd locking
refcount doesn't get incremented unintentionally.
Cc: kent.russell@amd.com
Closes: https://community.frame.work/t/amd-egpu-on-linux/8691/33
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a23e7b433)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee5007765 upstream.
[Why]
DP-HDMI dongles can execeed bandwidth requirements on high resolution
monitors. This can lead to pruning the high resolution modes.
HDMI 1.3 bumped the clock to 340MHz, but display code never matched it.
[How]
Set default to (DVI) 165MHz. Once HDMI display is identified update
to 340MHz.
Reported-by: Dianne Skoll <dianne@skoll.ca>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac1e65d8ad)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9814cc832b upstream.
When a context DAMON sysfs directory setup is failed after setup of attrs/
directory, subdirectories of attrs/ directory are not cleaned up. As a
result, DAMON sysfs interface is nearly broken until the system reboots,
and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-3-sj@kernel.org
Fixes: c951cd3b89 ("mm/damon: implement a minimal stub for sysfs-based DAMON interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9efe36b5e upstream.
When page isolation loops indefinitely during memory offline, reading
/proc/sys/vm/percpu_pagelist_high_fraction blocks on pcp_batch_high_lock,
causing hung task warnings.
Make procfs reads lock-free since percpu_pagelist_high_fraction is a
simple integer with naturally atomic reads, writers still serialize via
the mutex.
This prevents hung task warnings when reading the procfs file during
long-running memory offline operations.
[akpm@linux-foundation.org: add comment, per Michal]
Link: https://lkml.kernel.org/r/aS_y9AuJQFydLEXo@tiehlicka
Link: https://lkml.kernel.org/r/20251201060009.1420792-1-aboorvad@linux.ibm.com
Signed-off-by: Aboorva Devarajan <aboorvad@linux.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 590b13669b upstream.
crypto_alloc_acomp_node() may return ERR_PTR(), but the fail path checks
only for NULL and can pass an error pointer to crypto_free_acomp(). Use
IS_ERR_OR_NULL() to only free valid acomp instances.
Link: https://lkml.kernel.org/r/20251231074638.2564302-1-pbutsykin@cloudlinux.com
Fixes: 779b9955f6 ("mm: zswap: move allocations during CPU init outside the lock")
Signed-off-by: Pavel Butsykin <pbutsykin@cloudlinux.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0edb475ac0 upstream.
The commit d2fe192348 (“nvme: only allow entering LIVE from CONNECTING
state”) disallows controller state transitions directly from RESETTING
to LIVE. However, the NVMe PCIe subsystem reset path relies on this
transition to recover the controller on PowerPC (PPC) systems.
On PPC systems, issuing a subsystem reset causes a temporary loss of
communication with the NVMe adapter. A subsequent PCIe MMIO read then
triggers EEH recovery, which restores the PCIe link and brings the
controller back online. For EEH recovery to proceed correctly, the
controller must transition back to the LIVE state.
Due to the changes introduced by commit d2fe192348 (“nvme: only allow
entering LIVE from CONNECTING state”), the controller can no longer
transition directly from RESETTING to LIVE. As a result, EEH recovery
exits prematurely, leaving the controller stuck in the RESETTING state.
Fix this by explicitly transitioning the controller state from RESETTING
to CONNECTING and then to LIVE. This satisfies the updated state
transition rules and allows the controller to be successfully recovered
on PPC systems following a PCIe subsystem reset.
Cc: stable@vger.kernel.org
Fixes: d2fe192348 ("nvme: only allow entering LIVE from CONNECTING state")
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7517e899e1 upstream.
The memory bandwidth calculation relies on reading the hardware counter
and measuring the delta between samples. To ensure accurate measurement,
the software reads the counter frequently enough to prevent it from
rolling over twice between reads.
The default Memory Bandwidth Monitoring (MBM) counter width is 24 bits.
Hygon CPUs provide a 32-bit width counter, but they do not support the
MBM capability CPUID leaf (0xF.[ECX=1]:EAX) to report the width offset
(from 24 bits).
Consequently, the kernel falls back to the 24-bit default counter width,
which causes incorrect overflow handling on Hygon CPUs.
Fix this by explicitly setting the counter width offset to 8 bits (resulting
in a 32-bit total counter width) for Hygon CPUs.
Fixes: d8df126349 ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209062650.1536952-3-shenxiaochen@open-hieco.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ee98aabdc upstream.
Hygon CPUs supporting Platform QoS features currently undergo partial resctrl
initialization through resctrl_cpu_detect() in the Hygon BSP init helper and
AMD/Hygon common initialization code. However, several critical data
structures remain uninitialized for Hygon CPUs in the following paths:
- get_mem_config()-> __rdt_get_mem_config_amd():
rdt_resource::membw,alloc_capable
hw_res::num_closid
- rdt_init_res_defs()->rdt_init_res_defs_amd():
rdt_resource::cache
hw_res::msr_base,msr_update
Add the missing AMD/Hygon common initialization to ensure proper Platform QoS
functionality on Hygon CPUs.
Fixes: d8df126349 ("x86/cpu/hygon: Add missing resctrl_cpu_detect() in bsp_init helper")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251209062650.1536952-2-shenxiaochen@open-hieco.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e383f09614 upstream.
Commit 53326135d0 ("i2c: riic: Add suspend/resume support") added
suspend support for the Renesas I2C driver and following this change
on RZ/G3E the following WARNING is seen on entering suspend ...
[ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 134.285536] ------------[ cut here ]------------
[ 134.290298] i2c i2c-2: Transfer while suspended
[ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388
[ 134.365507] Tainted: [W]=WARN
[ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT)
[ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214
[ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214
[ 134.391717] sp : ffff800083f23860
[ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60
[ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001
[ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936
[ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006
[ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280
[ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09
[ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8
[ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000
[ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000
[ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80
[ 134.466851] Call trace:
[ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P)
[ 134.473715] i2c_smbus_xfer+0xbc/0x120
[ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84
[ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208]
[ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208]
[ 134.493226] __rtc_read_time+0x44/0x88
[ 134.497012] rtc_read_time+0x3c/0x68
[ 134.500622] rtc_suspend+0x9c/0x170
The warning is triggered because I2C transfers can still be attempted
while the controller is already suspended, due to inappropriate ordering
of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once
runtime PM disabled (in suspend_late()). During system resume, the I2C
controller will be available only after runtime PM is re-enabled
(in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is
still enabled. The I2C controller will remain available until the
suspend_noirq() callback (pm_runtime_force_suspend()) is called. During
resume, the I2C controller can be restored by the resume_noirq() callback
(pm_runtime_force_resume()). Finally, the resume() callback re-enables
autosuspend. As a result, the I2C controller can remain available until
the system enters suspend_noirq() and from resume_noirq().
Cc: stable@vger.kernel.org
Fixes: 53326135d0 ("i2c: riic: Add suspend/resume support")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1366cd228b upstream.
If ports are defined in the tcpc main node, fwnode_usb_role_switch_get()
returns an error, meaning usb_role_switch_get() (which would succeed)
never gets a chance to run as port->role_sw isn't NULL, causing a
regression on devices where this is the case.
Fix this by turning the NULL check into IS_ERR_OR_NULL(), so
usb_role_switch_get() can actually run and the device get properly probed.
Fixes: 2d8713f807 ("tcpm: switch check for role_sw device with fw_node")
Cc: stable <stable@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Link: https://patch.msgid.link/20260105-fix-ppp-power-v2-1-6924f5a41224@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ff7c44106 upstream.
If edac_mc_alloc() fails, also unmap the window.
[ bp: Use separate labels, turning it into the classic unwind pattern. ]
Fixes: df8bc08c19 ("edac x38: new MC driver module")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251223124350.1496325-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05dc4a9fc8 upstream.
The 'clockid' field is not the correct way to check for a softirq base.
Fix the check to correctly compare the base type instead of the clockid.
Fixes: 1e7f7fbcd4 ("hrtimer: Avoid more SMP function calls in clock_was_set()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260107-hrtimer-clock-base-check-v1-1-afb5dbce94a1@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d250bdf531 upstream.
The error branch for ext4_xattr_inode_update_ref forget to release the
refcount for iloc.bh. Find this when review code.
Fixes: 57295e8354 ("ext4: guard against EA inode refcount underflow in xattr update")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20251213055706.3417529-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29d71b8a5a upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Cc: stable@vger.kernel.org # 5.6
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-3-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 340f4fc550 upstream.
Secondary temperature thresholds (temp2_{min,max}) were not reported
properly on this NVMe SSD. This resulted in an error while attempting to
read these values with sensors(1):
ERROR: Can't get value of subfeature temp2_min: I/O error
ERROR: Can't get value of subfeature temp2_max: I/O error
Add the device to the nvme_id_table with the
NVME_QUIRK_NO_SECONDARY_TEMP_THRESH flag to suppress access to all non-
composite temperature thresholds.
Cc: stable@vger.kernel.org
Tested-by: Wu Haotian <rigoligo03@gmail.com>
Signed-off-by: Ilikara Zheng <ilikara@aosc.io>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01ef7f1b87 upstream.
Commit 9beeee6584 ("USB: EHCI: log a warning if ehci-hcd is not
loaded first") said that ehci-hcd should be loaded before ohci-hcd and
uhci-hcd. However, commit 05c92da0c5 ("usb: ohci/uhci - add soft
dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci-
pci, which is not enough and we may still see the warnings in boot log.
To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on
ehci-hcd. But Alan said that the warning introduced by 9beeee6584
is bogus, we only need the soft dependencies in the PCI level rather
than the HCD level.
However, there is really another neccessary soft dependencies between
ohci-platform/uhci-platform and ehci-platform, which is added by this
patch. The boot logs are below.
1. ohci-platform loaded before ehci-platform:
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1
ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb 1-4: new low-speed USB device number 2 using ohci-platform
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
usb 1-4: device descriptor read/all, error -62
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-4: new low-speed USB device number 3 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
2. ehci-platform loaded before ohci-platform:
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2
ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new low-speed USB device number 2 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
In the later case, there is no re-connection for USB-1.0/1.1 devices,
which is expected.
Cc: stable <stable@kernel.org>
Reported-by: Shengwen Xiao <atzlinux@sina.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260112084802.1995923-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2740ac33c8 upstream.
Add USB_QUIRK_NO_BOS quirk flag to skip requesting the BOS descriptor
for devices that cannot handle it.
Add Elgato 4K X (0fd9:009b) to the quirk table. This device hangs when
the BOS descriptor is requested at SuperSpeed Plus (10Gbps).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220027
Cc: stable <stable@kernel.org>
Signed-off-by: Johannes Brüderl <johannes.bruederl@gmail.com>
Link: https://patch.msgid.link/20251207090220.14807-1-johannes.bruederl@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b246caa680 upstream.
The USB2 Bias Pad Control register manages analog parameters for signal
detection. Previously, the HS_DISCON_LEVEL relied on hardware reset
values, which may lead to the detection failure.
Explicitly configure HS_DISCON_LEVEL to 0x7. This ensures the disconnect
threshold is sufficient to guarantee reliable detection.
Fixes: bbf711682c ("phy: tegra: xusb: Add Tegra186 support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Link: https://patch.msgid.link/20251212032116.768307-1-waynec@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 028e8ca7b2 upstream.
When the OTG USB port is used to power the SoC, configured as peripheral
and used in gadget mode, there is a disconnection about 6 seconds after the
gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The problem happens because of the PHY driver code flow, summarized as:
* UDC start code (triggered via configfs at any time after boot)
-> phy_init
-> rockchip_usb2phy_init
-> schedule_delayed_work(otg_sm_work [A], 6 sec)
-> phy_power_on
-> rockchip_usb2phy_power_on
-> enable clock
-> rockchip_usb2phy_reset
* Now the gadget interface is up and running.
* 6 seconds later otg_sm_work starts [A]
-> rockchip_usb2phy_otg_sm_work():
if (B_IDLE state && VBUS present && ...):
schedule_delayed_work(&rport->chg_work [B], 0);
* immediately the chg_detect_work starts [B]
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
if (!rport->suspended):
rockchip_usb2phy_power_off() <--- [X]
At [X], the PHY is powered off, causing a disconnection. This quickly
triggers a new connection and following re-enumeration, but any connection
that had been established during the 6 seconds is broken.
The code already checks for !rport->suspended (which, somewhat
counter-intuitively, means the PHY is powered on), so add a guard for VBUS
as well to avoid a disconnection when a cable is connected.
Fixes: 98898f3bc8 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-1-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2ec4723de upstream.
After U-Boot initializes PCIe with "pcie enum", Linux fails to detect
an NVMe disk on some boot cycles with:
phy phy-32f00000.pcie-phy.0: phy poweron failed --> -110
Discussion with NXP identified that the iMX8MP PCIe PHY PLL may fail to
lock when re-initialized without a reset cycle [1].
The issue reproduces on 7% of tested hardware platforms, with a 30-40%
failure rate per affected device across boot cycles.
Insert a reset cycle in the power-on routine to ensure the PHY is
initialized from a known state.
[1] https://community.nxp.com/t5/i-MX-Processors/iMX8MP-PCIe-initialization-in-U-Boot/m-p/2248437#M242401
Signed-off-by: Rafael Beims <rafael.beims@toradex.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251223150254.1075221-1-rafael@beims.me
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4914d67da9 upstream.
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 5ab90f4012 ("phy: ti: gmii-sel: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.14
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134834.2030-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d8f725b79 upstream.
When the OTG USB port is used to power to SoC, configured as peripheral and
used in gadget mode, communication stops without notice about 6 seconds
after the gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The related code flow in the PHY driver code can be summarized as:
* the first time chg_detect_work starts (6 seconds after gadget is
configured and enumerated)
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y]
* rockchip_chg_detect_work() changes state and re-triggers itself a few
times until it reaches the DETECTED state:
-> rockchip_chg_detect_work():
if chg_state is DETECTED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z]
At [Y] all existing communications stop. E.g. using a CDC serial gadget,
the /dev/tty* devices are still present on both host and device, but no
data is transferred anymore. The later call with a 'true' argument at [Z]
does not restore it.
Due to the lack of documentation, what chg_det.opmode does exactly is not
clear, however by code inspection it seems reasonable that is disables
something needed to keep the communication working, and testing proves that
disabling these lines lets gadget mode keep working. So prevent changes to
chg_det.opmode when there is a cable connected (VBUS present).
Fixes: 98898f3bc8 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-2-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 269031b15c upstream.
Commit 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
is too narrow. The effect being mitigated in that commit is caused by
ZONE_DEVICE which PCI_P2PDMA has a dependency. ZONE_DEVICE, in general,
lets any physical address be added to the direct-map. I.e. not only ACPI
hotplug ranges, CXL Memory Windows, or EFI Specific Purpose Memory, but
also any PCI MMIO range for the DEVICE_PRIVATE and PCI_P2PDMA cases. Update
the mitigation, limit KASLR entropy, to apply in all ZONE_DEVICE=y cases.
Distro kernels typically have PCI_P2PDMA=y, so the practical exposure of
this problem is limited to the PCI_P2PDMA=n case.
A potential path to recover entropy would be to walk ACPI and determine the
limits for hotplug and PCI MMIO before kernel_randomize_memory(). On
smaller systems that could yield some KASLR address bits. This needs
additional investigation to determine if some limited ACPI table scanning
can happen this early without an open coded solution like
arch/x86/boot/compressed/acpi.c needs to deploy.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Fixes: 7ffb791423 ("x86/kaslr: Reduce KASLR entropy on most x86 systems")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Yasunori Goto <y-goto@fujitsu.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: http://patch.msgid.link/692e08b2516d4_261c1100a3@dwillia2-mobl4.notmuch
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 777a8560fd upstream.
Prevent a "BUG: unable to handle kernel NULL pointer dereference in
filemap_read_folio".
For the sleepable context, convert freader to use __kernel_read() instead
of direct page cache access via read_cache_folio(). This simplifies the
faultable code path by using the standard kernel file reading interface
which handles all the complexity of reading file data.
At the moment we are not changing the code for non-sleepable context which
uses filemap_get_folio() and only succeeds if the target folios are
already in memory and up-to-date. The reason is to keep the patch simple
and easier to backport to stable kernels.
Syzbot repro does not crash the kernel anymore and the selftests run
successfully.
In the follow up we will make __kernel_read() with IOCB_NOWAIT work for
non-sleepable contexts. In addition, I would like to replace the
secretmem check with a more generic approach and will add fstest for the
buildid code.
Link: https://lkml.kernel.org/r/20251222205859.3968077-1-shakeel.butt@linux.dev
Fixes: ad41251c29 ("lib/buildid: implement sleepable build_id_parse() API")
Reported-by: syzbot+09b7d050e4806540153d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=09b7d050e4806540153d
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jinchao Wang <wangjinchao600@gmail.com>
Link: https://lkml.kernel.org/r/aUteBPWPYzVWIZFH@ndev
Reviewed-by: Christian Brauner <brauner@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b2d155366 upstream.
xfs_rtcopy_summary() should return the appropriate error code
instead of always returning 0. The caller of this function which is
xfs_growfs_rt_bmblock() is already handling the error.
Fixes: e94b53ff69 ("xfs: cache last bitmap block in realtime allocator")
Signed-off-by: Nirjhar Roy (IBM) <nirjhar.roy.lists@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # v6.7
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1809c82aa0 upstream.
Since j1939_session_deactivate_activate_next() in j1939_tp_rxtimer() is
called only when the timer is enabled, we need to call
j1939_session_deactivate_activate_next() if we cancelled the timer.
Otherwise, refcount for j1939_session leaks, which will later appear as
| unregister_netdevice: waiting for vcan0 to become free. Usage count = 2.
problem.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Link: https://patch.msgid.link/b1212653-8fa1-44e1-be9d-12f950fb3a07@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e707c591a1 upstream.
The Secondary Sample Point Source field has been
set to an incorrect value by some mistake in the
past
0b01 - SSP_SRC_NO_SSP - SSP is not used.
for data bitrates above 1 MBit/s. The correct/default
value already used for lower bitrates is
0b00 - SSP_SRC_MEAS_N_OFFSET - SSP position = TRV_DELAY
(Measured Transmitter delay) + SSP_OFFSET.
The related configuration register structure is described
in section 3.1.46 SSP_CFG of the CTU CAN FD
IP CORE Datasheet.
The analysis leading to the proper configuration
is described in section 2.8.3 Secondary sampling point
of the datasheet.
The change has been tested on AMD/Xilinx Zynq
with the next CTU CN FD IP core versions:
- 2.6 aka master in the "integration with Zynq-7000 system" test
6.12.43-rt12+ #1 SMP PREEMPT_RT kernel with CTU CAN FD git
driver (change already included in the driver repo)
- older 2.5 snapshot with mainline kernels with this patch
applied locally in the multiple CAN latency tester nightly runs
6.18.0-rc4-rt3-dut #1 SMP PREEMPT_RT
6.19.0-rc3-dut
The logs, the datasheet and sources are available at
https://canbus.pages.fel.cvut.cz/
Signed-off-by: Ondrej Ille <ondrej.ille@gmail.com>
Signed-off-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260105111620.16580-1-pisa@fel.cvut.cz
Fixes: 2dcb8e8782 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7352e1d593 upstream.
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260105-gs_usb-fix-memory-leak-v2-1-cc6ed6438034@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40b94ec7ed upstream.
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blk
driver sets up fault injection support by creating the timeout_inject,
requeue_inject, and init_hctx_fault_inject configfs items as children
of the top-level nullbX configfs group.
However, when the nullbX device is removed, the references taken to
these fault-config configfs items are not released. As a result,
kmemleak reports a memory leak, for example:
unreferenced object 0xc00000021ff25c40 (size 32):
comm "mkdir", pid 10665, jiffies 4322121578
hex dump (first 32 bytes):
69 6e 69 74 5f 68 63 74 78 5f 66 61 75 6c 74 5f init_hctx_fault_
69 6e 6a 65 63 74 00 88 00 00 00 00 00 00 00 00 inject..........
backtrace (crc 1a018c86):
__kmalloc_node_track_caller_noprof+0x494/0xbd8
kvasprintf+0x74/0xf4
config_item_set_name+0xf0/0x104
config_group_init_type_name+0x48/0xfc
fault_config_init+0x48/0xf0
0xc0080000180559e4
configfs_mkdir+0x304/0x814
vfs_mkdir+0x49c/0x604
do_mkdirat+0x314/0x3d0
sys_mkdir+0xa0/0xd8
system_call_exception+0x1b0/0x4f0
system_call_vectored_common+0x15c/0x2ec
Fix this by explicitly releasing the references to the fault-config
configfs items when dropping the reference to the top-level nullbX
configfs group.
Cc: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Fixes: bb4c19e030 ("block: null_blk: make fault-injection dynamically configurable per device")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a49157dee upstream.
Some low-level drivers (LLD) access block layer crypto fields, such as
rq->crypt_keyslot and rq->crypt_ctx within `struct request`, to
configure hardware for inline encryption. However, SCSI Error Handling
(EH) commands (e.g., TEST UNIT READY, START STOP UNIT) should not
involve any encryption setup.
To prevent drivers from erroneously applying crypto settings during EH,
this patch saves the original values of rq->crypt_keyslot and
rq->crypt_ctx before an EH command is prepared via scsi_eh_prep_cmnd().
These fields in the 'struct request' are then set to NULL. The original
values are restored in scsi_eh_restore_cmnd() after the EH command
completes.
This ensures that the block layer crypto context does not leak into EH
command execution.
Signed-off-by: Brian Kao <powenkao@google.com>
Link: https://patch.msgid.link/20251218031726.2642834-1-powenkao@google.com
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da579f05ef upstream.
With IORING_SETUP_DEFER_TASKRUN, task work is queued to ctx->work_llist
(local work) rather than the fallback list. During io_ring_exit_work(),
io_move_task_work_from_local() was called once before the cancel loop,
moving work from work_llist to fallback_llist.
However, task work can be added to work_llist during the cancel loop
itself. There are two cases:
1) io_kill_timeouts() is called from io_uring_try_cancel_requests() to
cancel pending timeouts, and it adds task work via io_req_queue_tw_complete()
for each cancelled timeout:
2) URING_CMD requests like ublk can be completed via
io_uring_cmd_complete_in_task() from ublk_queue_rq() during canceling,
given ublk request queue is only quiesced when canceling the 1st uring_cmd.
Since io_allowed_defer_tw_run() returns false in io_ring_exit_work()
(kworker != submitter_task), io_run_local_work() is never invoked,
and the work_llist entries are never processed. This causes
io_uring_try_cancel_requests() to loop indefinitely, resulting in
100% CPU usage in kworker threads.
Fix this by moving io_move_task_work_from_local() inside the cancel
loop, ensuring any work on work_llist is moved to fallback before
each cancel attempt.
Cc: stable@vger.kernel.org
Fixes: c0e0d6ba25 ("io_uring: add IORING_SETUP_DEFER_TASKRUN")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8d42cd228 upstream.
When compiling allmodconfig (CONFIG_WERROR=y) with clang-19, see the
following errors:
.../display/dc/dml2/display_mode_core.c:6268:13: warning: stack frame size (3128) exceeds limit (3072) in 'dml_prefetch_check' [-Wframe-larger-than]
.../display/dc/dml2/dml21/src/dml2_core/dml2_core_dcn4_calcs.c:7236:13: warning: stack frame size (3256) exceeds limit (3072) in 'dml_core_mode_support' [-Wframe-larger-than]
Mark static functions called by dml_prefetch_check() and
dml_core_mode_support() noinline_for_stack to avoid them become huge
functions and thus exceed the frame size limit.
A way to reproduce:
$ git checkout next-20250107
$ mkdir build_dir
$ export PATH=/tmp/llvm-19.1.6-x86_64/bin:$PATH
$ make LLVM=1 O=build_dir allmodconfig
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
The way how it chose static functions to mark:
[0] Unset CONFIG_WERROR in build_dir/.config.
To get display_mode_core.o without errors.
[1] Get a function list called by dml_prefetch_check().
$ sed -n '6268,6711p' drivers/gpu/drm/amd/display/dc/dml2/display_mode_core.c \
| sed -n -r 's/.*\W(\w+)\(.*/\1/p' | sort -u >/tmp/syms
[2] Get the non-inline function list.
Objdump won't show the symbols if they are inline functions.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/orig
[3] Get the full function list.
Append "-fno-inline" to `CFLAGS_.../display_mode_core.o` in
drivers/gpu/drm/amd/display/dc/dml2/Makefile.
$ make LLVM=1 O=build_dir drivers/gpu/drm/ -j
$ objdump -d build_dir/.../display_mode_core.o | \
./scripts/checkstack.pl x86_64 0 | \
grep -f /tmp/syms | cut -d' ' -f2- >/tmp/noinline
[4] Get the inline function list.
If a symbol only in /tmp/noinline but not in /tmp/orig, it is a good
candidate to mark noinline.
$ diff /tmp/orig /tmp/noinline
Chosen functions and their stack sizes:
CalculateBandwidthAvailableForImmediateFlip [display_mode_core.o]:144
CalculateExtraLatency [display_mode_core.o]:176
CalculateTWait [display_mode_core.o]:64
CalculateVActiveBandwithSupport [display_mode_core.o]:112
set_calculate_prefetch_schedule_params [display_mode_core.o]:48
CheckGlobalPrefetchAdmissibility [dml2_core_dcn4_calcs.o]:544
calculate_bandwidth_available [dml2_core_dcn4_calcs.o]:320
calculate_vactive_det_fill_latency [dml2_core_dcn4_calcs.o]:272
CalculateDCFCLKDeepSleep [dml2_core_dcn4_calcs.o]:208
CalculateODMMode [dml2_core_dcn4_calcs.o]:208
CalculateOutputLink [dml2_core_dcn4_calcs.o]:176
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[nathan: Fix conflicts in dml2_core_dcn4_calcs.c]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49aadf830e upstream.
The soundwire update_status() callback may be called multiple times with
the same ATTACHED status but initialisation should only be done when
transitioning from UNATTACHED to ATTACHED.
This avoids repeated initialisation of the codecs during boot of
machines like the Lenovo ThinkPad X13s:
[ 11.614523] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.618022] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.621377] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.624065] wsa883x-codec sdw:1:0:0217:0202:00:1: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.631382] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
[ 11.634424] wsa883x-codec sdw:1:0:0217:0202:00:2: WSA883X Version 1_1, Variant: WSA8835_V2
Fixes: 43b8c7dc85 ("ASoC: codecs: add wsa883x amplifier support")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srini@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260102111413.9605-2-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7544f3f5b0 upstream.
The bridge maintains a global list of ports behind which a multicast
router resides. The list is consulted during forwarding to ensure
multicast packets are forwarded to these ports even if the ports are not
member in the matching MDB entry.
When per-VLAN multicast snooping is enabled, the per-port multicast
context is disabled on each port and the port is removed from the global
router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 1
$ bridge -d mdb show | grep router
However, the port can be re-added to the global list even when per-VLAN
multicast snooping is enabled:
# ip link set dev dummy1 type bridge_slave mcast_router 0
# ip link set dev dummy1 type bridge_slave mcast_router 2
$ bridge -d mdb show | grep router
router ports on br1: dummy1
Since commit 4b30ae9adb ("net: bridge: mcast: re-implement
br_multicast_{enable, disable}_port functions"), when per-VLAN multicast
snooping is enabled, multicast disablement on a port will disable the
per-{port, VLAN} multicast contexts and not the per-port one. As a
result, a port will remain in the global router port list even after it
is deleted. This will lead to a use-after-free [1] when the list is
traversed (when adding a new port to the list, for example):
# ip link del dev dummy1
# ip link add name dummy2 up master br1 type dummy
# ip link set dev dummy2 type bridge_slave mcast_router 2
Similarly, stale entries can also be found in the per-VLAN router port
list. When per-VLAN multicast snooping is disabled, the per-{port, VLAN}
contexts are disabled on each port and the port is removed from the
per-VLAN router port list:
# ip link add name br1 up type bridge vlan_filtering 1 mcast_snooping 1 mcast_vlan_snooping 1
# ip link add name dummy1 up master br1 type dummy
# bridge vlan add vid 2 dev dummy1
# bridge vlan global set vid 2 dev br1 mcast_snooping 1
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
# ip link set dev br1 type bridge mcast_vlan_snooping 0
$ bridge vlan global show dev br1 vid 2 | grep router
However, the port can be re-added to the per-VLAN list even when
per-VLAN multicast snooping is disabled:
# bridge vlan set vid 2 dev dummy1 mcast_router 0
# bridge vlan set vid 2 dev dummy1 mcast_router 2
$ bridge vlan global show dev br1 vid 2 | grep router
router ports: dummy1
When the VLAN is deleted from the port, the per-{port, VLAN} multicast
context will not be disabled since multicast snooping is not enabled
on the VLAN. As a result, the port will remain in the per-VLAN router
port list even after it is no longer member in the VLAN. This will lead
to a use-after-free [2] when the list is traversed (when adding a new
port to the list, for example):
# ip link add name dummy2 up master br1 type dummy
# bridge vlan add vid 2 dev dummy2
# bridge vlan del vid 2 dev dummy1
# bridge vlan set vid 2 dev dummy2 mcast_router 2
Fix these issues by removing the port from the relevant (global or
per-VLAN) router port list in br_multicast_port_ctx_deinit(). The
function is invoked during port deletion with the per-port multicast
context and during VLAN deletion with the per-{port, VLAN} multicast
context.
Note that deleting the multicast router timer is not enough as it only
takes care of the temporary multicast router states (1 or 3) and not the
permanent one (2).
[1]
BUG: KASAN: slab-out-of-bounds in br_multicast_add_router.part.0+0x3f1/0x560
Write of size 8 at addr ffff888004a67328 by task ip/384
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x3f1/0x560
br_multicast_set_port_router+0x74e/0xac0
br_setport+0xa55/0x1870
br_port_slave_changelink+0x95/0x120
__rtnl_newlink+0x5e8/0xa40
rtnl_newlink+0x627/0xb00
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
[2]
BUG: KASAN: slab-use-after-free in br_multicast_add_router.part.0+0x378/0x560
Read of size 8 at addr ffff888009f00840 by task bridge/391
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
br_multicast_add_router.part.0+0x378/0x560
br_multicast_set_port_router+0x6f9/0xac0
br_vlan_process_options+0x8b6/0x1430
br_vlan_rtm_process_one+0x605/0xa30
br_vlan_rtm_process+0x396/0x4c0
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x11f/0x350
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x124/0x1c0
do_syscall_64+0xbb/0x360
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 2796d846d7 ("net: bridge: vlan: convert mcast router global option to per-vlan entry")
Fixes: 4b30ae9adb ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions")
Reported-by: syzbot+7bfa4b72c6a5da128d32@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/684c18bd.a00a0220.279073.000b.GAE@google.com/T/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250619182228.1656906-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f28beb69c5 upstream.
Some faulty devices (ZWO EFWmini) have a wrong optional HID class
descriptor count compared to the provided length.
Given that we plainly ignore those optional descriptor, we can attempt
to fix the provided number so we do not lock out those devices.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0c50e3743 ]
The I2C Hub controller is a simpler GENI I2C variant that doesn't
support DMA at all, add a no_dma flag to make sure it nevers selects
the SE DMA mode with mappable 32bytes long transfers.
Fixes: cacd9643ec ("i2c: qcom-geni: add support for I2C Master Hub variant")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Mukesh Kumar Savaliya <mukesh.savaliya@oss.qualcomm.com>>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1136acf8 ]
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource.
Fixes: 7bedaa5537 ("dmaengine: add OMAP DMA engine driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251103073018.643-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb21116099 ]
"family" is an enum, thus cast of pointer on 64-bit compile test with
clang W=1 causes:
phy-bcm-ns-usb3.c:206:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
This was already fixed in commit bd6e74a2f0 ("phy: broadcom: ns-usb3:
fix Wvoid-pointer-to-enum-cast warning") but then got bad in commit
21bf6fc47a ("phy: Use device_get_match_data()").
Note that after various discussions the preferred cast is via "unsigned
long", not "uintptr_t".
Fixes: 21bf6fc47a ("phy: Use device_get_match_data()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251224115533.154162-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a57c3359 ]
Remove bind() call on a client socket that doesn't make sense.
Since strlen(cli_un.sun_path) returns a random value depending on stack
garbage, that many uninitialized bytes are read from the stack as an
unix socket address. This creates random test failures due to the bind
address being invalid or already in use if the same stack value comes up
twice.
Fixes: f83d51a5bd ("selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20251201003631.190817-1-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd09d9a05c ]
The nominal error code for bind(AF_UNSPEC) on an IPv6 socket
is -EAFNOSUPPORT, not -EINVAL. -EINVAL is only returned when
the supplied address struct is too short, which happens to be
the case in current selftests because they treat AF_UNSPEC
like IPv4 sockets do: as an alias for AF_INET (which is a
16-byte struct instead of the 24 bytes required by IPv6
sockets).
Make the union large enough for any address (by adding struct
sockaddr_storage to the union), and make AF_UNSPEC addresses
large enough for any family.
Test for -EAFNOSUPPORT instead, and add a dedicated test case
for truncated inputs with -EINVAL.
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Signed-off-by: Matthieu Buffet <matthieu@buffet.re>
Link: https://lore.kernel.org/r/20251027190726.626244-2-matthieu@buffet.re
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
