Commit graph

1,431,450 commits

Author SHA1 Message Date
Jakub Kicinski
05ed6c221e Merge branch 'add-tso-map-once-dma-helpers-and-bnxt-sw-uso-support'
Joe Damato says:

====================
Add TSO map-once DMA helpers and bnxt SW USO support

Greetings:

This series extends net/tso to add a data structure and some helpers allowing
drivers to DMA map headers and packet payloads a single time. The helpers can
then be used to reference slices of shared mapping for each segment. This
helps to avoid the cost of repeated DMA mappings, especially on systems which
use an IOMMU. N per-packet DMA maps are replaced with a single map for the
entire GSO skb. As of v3, the series uses the DMA IOVA API (as suggested by
Leon [1]) and provides a fallback path when an IOMMU is not in use. The DMA
IOVA API provides even better efficiency than the v2; see below.

The added helpers are then used in bnxt to add support for software UDP
Segmentation Offloading (SW USO) for older bnxt devices which do not have
support for USO in hardware. Since the helpers are generic, other drivers
can be extended similarly.

The v2 showed a ~4x reduction in DMA mapping calls at the same wire packet
rate on production traffic with a bnxt device. The v3, however, shows a larger
reduction of about ~6x at the same wire packet rate. This is thanks to Leon's
suggestion of using the DMA IOVA API [1].

Special care is taken to make bnxt ethtool operations work correctly: the ring
size cannot be reduced below a minimum threshold while USO is enabled and
growing the ring automatically re-enables USO if it was previously blocked.

This v10 contains some cosmetic changes (wrapping long lines), moves the test
to the correct directory, and attempts to fix the slot availability check
added in the v9.

I re-ran the python test and the test passed on my bnxt system. I also ran
this on a production system.
====================

Link: https://patch.msgid.link/20260408230607.2019402-1-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:35 -07:00
Joe Damato
5d3b12d1a2 selftests: drv-net: Add USO test
Add a simple test for USO. Tests both ipv4 and ipv6 with several full
segments and a partial segment.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-11-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:33 -07:00
Joe Damato
28f2c22398 net: bnxt: Dispatch to SW USO
Wire in the SW USO path added in preceding commits when hardware USO is
not possible.

When a GSO skb with SKB_GSO_UDP_L4 arrives and the NIC lacks HW USO
capability, redirect to bnxt_sw_udp_gso_xmit() which handles software
segmentation into individual UDP frames submitted directly to the TX
ring.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-10-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:33 -07:00
Joe Damato
87550ba2dc net: bnxt: Add SW GSO completion and teardown support
Update __bnxt_tx_int and bnxt_free_one_tx_ring_skbs to handle SW GSO
segments:

- MID segments: adjust tx_pkts/tx_bytes accounting and skip skb free
  (the skb is shared across all segments and freed only once)

- LAST segments: call tso_dma_map_complete() to tear down the IOVA
  mapping if one was used. On the fallback path, payload DMA unmapping
  is handled by the existing per-BD dma_unmap_len walk.

Both MID and LAST completions advance tx_inline_cons to release the
segment's inline header slot back to the ring.

is_sw_gso is initialized to zero, so the new code paths are not run.

Add logic for feature advertisement and guardrails for ring sizing.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-9-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
cc5d90667d net: bnxt: Implement software USO
Implement bnxt_sw_udp_gso_xmit() using the core tso_dma_map API and
the pre-allocated TX inline buffer for per-segment headers.

The xmit path:
1. Calls tso_start() to initialize TSO state
2. Stack-allocates a tso_dma_map and calls tso_dma_map_init() to
   DMA-map the linear payload and all frags upfront.
3. For each segment:
   - Copies and patches headers via tso_build_hdr() into the
     pre-allocated tx_inline_buf (DMA-synced per segment)
   - Counts payload BDs via tso_dma_map_count()
   - Emits long BD (header) + ext BD + payload BDs
   - Payload BDs use tso_dma_map_next() which yields (dma_addr,
     chunk_len, mapping_len) tuples.

Header BDs set dma_unmap_len=0 since the inline buffer is pre-allocated
and unmapped only at ring teardown.

Completion state is updated by calling tso_dma_map_completion_save() for
the last segment.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-8-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
0440e27eed net: bnxt: Add boilerplate GSO code
Add bnxt_gso.c and bnxt_gso.h with a stub bnxt_sw_udp_gso_xmit()
function, SW USO constants (BNXT_SW_USO_MAX_SEGS,
BNXT_SW_USO_MAX_DESCS), and the is_sw_gso field in bnxt_sw_tx_bd
with BNXT_SW_GSO_MID/LAST markers.

The full SW USO implementation will be added in a future commit.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-7-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
0c26a0e765 net: bnxt: Add TX inline buffer infrastructure
Add per-ring pre-allocated inline buffer fields (tx_inline_buf,
tx_inline_dma, tx_inline_size) to bnxt_tx_ring_info and helpers to
allocate and free them. A producer and consumer (tx_inline_prod,
tx_inline_cons) are added to track which slot(s) of the inline buffer
are in-use.

The inline buffer will be used by the SW USO path for pre-allocated,
pre-DMA-mapped per-segment header copies. In the future, this
could be extended to support TX copybreak.

Allocation helper is marked __maybe_unused in this commit because it
will be wired in later.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-6-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
3cb430e62c net: bnxt: Use dma_unmap_len for TX completion unmapping
Store the DMA mapping length in each TX buffer descriptor via
dma_unmap_len_set at submit time, and use dma_unmap_len at completion
time.

This is a no-op for normal packets but prepares for software USO,
where header BDs set dma_unmap_len to 0 because the header buffer
is unmapped collectively rather than per-segment.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-5-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
637237d3d9 net: bnxt: Add a helper for tx_bd_ext
Factor out some code to setup tx_bd_exts into a helper function. This
helper will be used by SW USO implementation in the following commits.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-4-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:32 -07:00
Joe Damato
268c63f2c6 net: bnxt: Export bnxt_xmit_get_cfa_action
Export bnxt_xmit_get_cfa_action so that it can be used in future commits
which add software USO support to bnxt.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-3-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:31 -07:00
Joe Damato
82db77f6fb net: tso: Introduce tso_dma_map and helpers
Add struct tso_dma_map to tso.h for tracking DMA addresses of mapped
GSO payload data and tso_dma_map_completion_state.

The tso_dma_map combines DMA mapping storage with iterator state, allowing
drivers to walk pre-mapped DMA regions linearly. Includes fields for
the DMA IOVA path (iova_state, iova_offset, total_len) and a fallback
per-region path (linear_dma, frags[], frag_idx, offset).

The tso_dma_map_completion_state makes the IOVA completion state opaque
for drivers. Drivers are expected to allocate this and use the added
helpers to update the completion state.

Adds skb_frag_phys() to skbuff.h, returning the physical address
of a paged fragment's data, which is used by the tso_dma_map helpers
introduced in this commit described below.

The added TSO DMA map helpers are:

tso_dma_map_init(): DMA-maps the linear payload region and all frags
upfront. Prefers the DMA IOVA API for a single contiguous mapping with
one IOTLB sync; falls back to per-region dma_map_phys() otherwise.
Returns 0 on success, cleans up partial mappings on failure.

tso_dma_map_cleanup(): Handles both IOVA and fallback teardown paths.

tso_dma_map_count(): counts how many descriptors the next N bytes of
payload will need. Returns 1 if IOVA is used since the mapping is
contiguous.

tso_dma_map_next(): yields the next (dma_addr, chunk_len) pair.
On the IOVA path, each segment is a single contiguous chunk. On the
fallback path, indicates when a chunk starts a new DMA mapping so the
driver can set dma_unmap_len on that descriptor for completion-time
unmapping.

tso_dma_map_completion_save(): updates the completion state. Drivers
will call this at xmit time.

tso_dma_map_complete(): tears down the mapping at completion time and
returns true if the IOVA path was used. If it was not used, this is a
no-op and returns false.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 10:54:31 -07:00
Luigi Leonardi
006679268a vsock/virtio: remove unnecessary call to virtio_transport_get_ops
`virtio_transport_send_pkt_info` gets all the transport information
from the parameter `t_ops`. There is no need to call
`virtio_transport_get_ops()`.

Remove it.

Acked-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260408-remove_parameter-v2-1-e00f31cf7a17@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:57:01 -07:00
Jiayuan Chen
5758be283f net: skb: clean up dead code after skb_kfree_head() simplification
Since commit 0f42e3f4fe ("net: skb: fix cross-cache free of
KFENCE-allocated skb head"), skb_kfree_head() always calls kfree()
and no longer uses end_offset to distinguish between skb_small_head_cache
and generic kmalloc caches.

Clean up the leftovers:

- Remove the unused end_offset parameter from skb_kfree_head() and
  update all callers.
- Remove the SKB_SMALL_HEAD_HEADROOM guard in __skb_unclone_keeptruesize()
  which was protecting the old skb_kfree_head() logic.
- Update the SKB_SMALL_HEAD_CACHE_SIZE comment to reflect that the
  non-power-of-2 sizing is no longer used for free-path disambiguation.

No functional change.

Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260410034736.297900-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:43:49 -07:00
Daniel Borkmann
e530b484b7 netkit: Don't emit scrub attribute for single device mode
When userspace reads a single mode netkit device via RTM_GETLINK,
it receives IFLA_NETKIT_SCRUB=NETKIT_SCRUB_DEFAULT attribute from
netkit_fill_info(). If that attribute is echoed back to recreate
the device, the seen_scrub presence check in netkit_new_link()
causes creation to fail with -EOPNOTSUPP. Since it has no meaning
for single devices at this point, just don't dump it.

Fixes: 4810389605 ("netkit: Add single device mode for netkit")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410072334.548232-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:43:10 -07:00
Thangaraj Samynathan
469faa546e net: lan743x: rename chip_rev to fpga_rev
The variable chip_rev stores the value read from the FPGA_REV
register and represents the FPGA revision. Rename it to fpga_rev
to better reflect its meaning.

No functional change intended.

Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260410085710.9246-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:41:56 -07:00
Florian Westphal
6111954266 selftests: netfilter: nft_tproxy.sh: adjust to socat changes
Like e65d8b6f30 ("selftests: drv-net: adjust to socat changes") we
need to add shut-none for this test too.

The extra 0-packet can trigger a second (unexpected) reply from the server.

Fixes: 7e37e0eacd ("selftests: netfilter: nft_tproxy.sh: add tcp tests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20260408152432.24b8ad0d@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260409224506.27072-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:41:16 -07:00
Jakub Kicinski
03a1569c2b netfilter pull request nf-next-26-04-10
-----BEGIN PGP SIGNATURE-----
 
 iQJdBAABCABHFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmnYzgIbFIAAAAAABAAO
 bWFudTIsMi41KzEuMTIsMiwyDRxmd0BzdHJsZW4uZGUACgkQcJGo2a1f9gCfDw/+
 KWf9fUlsE3uaxK889hfR0QU5ANQ03Ix1eVvr6Vh0Y5Za1glZDUuls0EsH0ej7/36
 ZQqAu2vaevHTVZl3EhAS1vu8KBcldl36YEtvJsQXFkFuOoO3F/dBdttwAif2tzv8
 ammqXOKicRHok1A3cy8R1fkGFAHpfn5BjBc68A0+SY1N2NFVdVNS9BP4p7tuSdkk
 JCj3TdDmBcddZ3SnY/z27S4+8jUL3e7HEAbsMApzIERcxe1w/6gEbb5Oa6AUwtHT
 2SwQlUyhBa6gx2tARgUsHcck5QiW8b1tX7y1tzyo2q6rw78m1Eublib5nYCav/w8
 9pSjRLlzSYBQ22e3wz7WqFXZRaM5+O38s3Moxfn/xrQblTk8CyW/5zGQJKivW9oG
 LEirCPbL6U6ZB/2Uy+3EvzG5TBP3cppB5sXaQfMdSQ03wvYFXMN35hb54ePZW6CX
 Db3lCwimOuXq+hkjVzZIU9ZmGr03oNohFX1GA0gDqrWtc9KsEKW8/KQvX61N8QK3
 YEMIZ6fbMkstCY98fS3j6r6+V1he6wzcZpsqjd9FACYXtf8LQbPvoMA4BfcGR8+X
 iQVEZcrvdGa39VH1TQFlXJIe/Pv+9tZ+CF44MsrNyYH0mD4gTInajklO3lkw/YQj
 RQTHJLal9RCF9gVZRqHgkpE8vUj0mtUkp6Atz6En4mU=
 =C/nr
 -----END PGP SIGNATURE-----

Merge tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next

Florian Westphal says:

====================
netfilter: updates for net-next

1-3) IPVS updates from Julian Anastasov to enhance visibility into
     IPVS internal state by exposing hash size, load factor etc and
     allows userspace to tune the load factor used for resizing hash
     tables.

4) reject empty/not nul terminated device names from xt_physdev.
   This isn't a bug fix; existing code doesn't require a c-string.
   But clean this up anyway because conceptually the interface name
   definitely should be a c-string.

5) Switch nfnetlink to skb_mac_header helpers that didn't exist back
   when this code was written.  This gives us additional debug checks
   but is not intended to change functionality.

6) Let the xt ttl/hoplimit match reject unknown operator modes.
   This is a cleanup, the evaluation function simply returns false when
   the mode is out of range.  From Marino Dzalto.

7) xt_socket match should enable defrag after all other checks. This
   bug is harmless, historically defrag could not be disabled either
   except by rmmod.

8) remove UDP-Lite conntrack support, from Fernando Fernandez Mancera.

9) Avoid a couple -Wflex-array-member-not-at-end warnings in the old
   xtables 32bit compat code, from Gustavo A. R. Silva.

10) nftables fwd expression should drop packets when their ttl/hl has
    expired.  This is a bug fix deferred, its not deemed important
    enough for -rc8.
11) Add additional checks before assuming the mac header is an ethernet
    header, from Zhengchuan Liang.

* tag 'nf-next-26-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
  netfilter: require Ethernet MAC header before using eth_hdr()
  netfilter: nft_fwd_netdev: check ttl/hl before forwarding
  netfilter: x_tables: Avoid a couple -Wflex-array-member-not-at-end warnings
  netfilter: conntrack: remove UDP-Lite conntrack support
  netfilter: xt_socket: enable defrag after all other checks
  netfilter: xt_HL: add pr_fmt and checkentry validation
  netfilter: nfnetlink: prefer skb_mac_header helpers
  netfilter: x_physdev: reject empty or not-nul terminated device names
  ipvs: add conn_lfactor and svc_lfactor sysctl vars
  ipvs: add ip_vs_status info
  ipvs: show the current conn_tab size to users
====================

Link: https://patch.msgid.link/20260410112352.23599-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:39:21 -07:00
Jakub Kicinski
118cbd428e Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
  - mac80211:
    - multi-link 4-addr support
    - NAN data support (but no drivers yet)
  - ath10k: DT quirk to make it work on some devices
  - ath12k: IPQ5424 support
  - rtw89: USB improvements for performance
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmnYm4gACgkQ10qiO8sP
 aABbhw/+Jb3JGnUT3PGqE+uyDsP5+uj6/thHVjugbtgFZeeNE6rAdprma1OzBbIF
 BZCgKivNRA4UHehYlZtgnp5Hm5bYCEF6ntGk5a7SLx6HuVn1JWR4cqc1zfCkmRmH
 7PtvShCy+rx2t6q/O5mZ3s2z4cSbauzvJ3s5j/qme/lZV5K6Hrx6HnJ6fudyBHOT
 vS6Ahl2tfFIyek6Qfs5xfUFzcNY4kEw6O8yMJ8F+ZgV4fXWZybmo4Ld6j/w0veiF
 0Wo9XYNQVu0EBqTkprsKwnZ0bmfQq03hivmupTm9b4gtXQjakb9o/wG2gQilKYkF
 ycS39cW3TxAGQDs/2U4l1CreumeRXtlq9OUywDu9arEICkJ0C7ierR3azo3fNeDB
 WomDYREtV7g3KOzoC6T0Zxivgdkg66W2ZVWvvWIHdSWCY+hYK+JsGXK6fZ5uAyo2
 5BOq/PQtK/m/3DTwR+lF3KYeUB8r+Q/FiJ1kMih6lAK+dZGDGhQPjN+seaVsIpfw
 cZVHu6hAmt7ks2zxbKpBmdFbyKjQu3Yk1UZNXtOKPuLzwKGdTECiRlJimJsOffcn
 lcveT93oz5zGSCwH1pEw0nIlsnEVGFQjxCOVln7eOs66i8vnJKMb/8OpvcxFqjsL
 rvItAvw+cPWrLXLB9VkxqZg2ndrWe9gGh+JJtRkGXhEjC4U9Ll0=
 =lf+O
 -----END PGP SIGNATURE-----

Merge tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
Final updates, notably:
 - crypto: move Michael MIC code into wireless (only)
 - mac80211:
   - multi-link 4-addr support
   - NAN data support (but no drivers yet)
 - ath10k: DT quirk to make it work on some devices
 - ath12k: IPQ5424 support
 - rtw89: USB improvements for performance

* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
  wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
  wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
  dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
  crypto: Remove michael_mic from crypto_shash API
  wifi: ipw2x00: Use michael_mic() from cfg80211
  wifi: ath12k: Use michael_mic() from cfg80211
  wifi: ath11k: Use michael_mic() from cfg80211
  wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
  wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
  wifi: libertas_tf: refactor endpoint lookup
  wifi: libertas: refactor endpoint lookup
  wifi: at76c50x: refactor endpoint lookup
  wifi: ath12k: Enable IPQ5424 WiFi device support
  wifi: ath12k: Add CE remap hardware parameters for IPQ5424
  wifi: ath12k: add ath12k_hw_regs for IPQ5424
  wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
  wifi: ath12k: Add ath12k_hw_params for IPQ5424
  dt-bindings: net: wireless: add ath12k wifi device IPQ5424
  wifi: ath10k: fix station lookup failure during disconnect
  wifi: ath12k: Create symlink for each radio in a wiphy
  ...
====================

Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:17:42 -07:00
Eric Dumazet
29703d7813 tcp: add indirect call wrapper in tcp_conn_request()
Small improvement in SYN processing, to directly call
tcp_v6_init_seq_and_ts_off() or tcp_v4_init_seq_and_ts_off().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260410174950.745670-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:17:03 -07:00
Daniel Borkmann
59818773ba net: Rename ifq_idx to rxq_idx in netif_mp_* helpers
Rename the leftover ifq_idx parameter naming to rxq_idx to be
consistent with the rest of the file and the header declaration.
Back then this was taken out of the queue leasing series given
the cleanup is independent. No functional change.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/20260131160237.07789674@kernel.org
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410130602.552600-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:12:07 -07:00
Jakub Kicinski
e46ff213f7 selftests: net: py: add test case filtering and listing
When developing new test cases and reproducing failures in
existing ones we currently have to run the entire test which
can take minutes to finish.

Add command line options for test selection, modeled after
kselftest_harness.h:

  -l       list tests (filtered, if filters were specified)
  -t name  include test
  -T name  exclude test

Since we don't have as clean separation into fixture / variant /
test as kselftest_harness this is not really a 1 to 1 match.
We have to lean on glob patterns instead.

Like in kselftest_harness filters are evaluated in order, first
match wins. If only exclusions are specified everything else is
included and vice versa.

Glob patterns (*, ?, [) are supported in addition to exact
matching.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Tested-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260410013921.1710295-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:09:09 -07:00
Jakub Kicinski
0aa72fc37e net: fix reference tracker mismanagement in netdev_put_lock()
dev_put() releases a reference which didn't have a tracker.
References without a tracker are accounted in the tracking
code as "no_tracker". We can't free the tracker and then
call dev_put(). The references themselves will be fine
but the tracking code will think it's a double-release:

  refcount_t: decrement hit 0; leaking memory.

IOW commit under fixes confused dev_put() (release never tracked
reference) with __dev_put() (just release the reference, skipping
the reference tracking infra).

Since __netdev_put_lock() uses dev_put() we can't feed a previously
tracked netdev ref into it. Let's flip things around.
netdev_put(dev, NULL) is the same as dev_put(dev) so make
netdev_put_lock() the real function and have __netdev_put_lock()
feed it a NULL tracker for all the cases that were untracked.

Fixes: d04686d9bc ("net: Implement netdev_nl_queue_create_doit")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260410153600.1984522-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:08:43 -07:00
Eric Dumazet
f5148298b0 tcp: return a drop_reason from tcp_add_backlog()
Part of a stack canary removal from tcp_v{4,6}_rcv().

Return a drop_reason instead of a boolean, so that we no longer
have to pass the address of a local variable.

$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-37 (-37)
Function                                     old     new   delta
tcp_v6_rcv                                  3133    3129      -4
tcp_v4_rcv                                  3206    3202      -4
tcp_add_backlog                             1281    1252     -29
Total: Before=25567186, After=25567149, chg -0.00%

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409101147.1642967-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:07:53 -07:00
Jakub Kicinski
4431c239a3 Merge branch 'ipvlan-multicast-delivery-changes'
Eric Dumazet says:

====================
ipvlan: multicast delivery changes

As we did recently for macvlan, this series adds some relief
when ipvlan is under multicast storms.
====================

Link: https://patch.msgid.link/20260409085238.1122947-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:06:00 -07:00
Eric Dumazet
6dd82499fa ipvlan: avoid spinlock contention in ipvlan_multicast_enqueue()
Under high stress, we spend a lot of time cloning skbs,
then acquiring a spinlock, then freeing the clone because
the queue is full.

Add a shortcut to avoid these costs under pressure, as we did
in macvlan with commit 0d5dc1d7aa ("macvlan: avoid spinlock
contention in macvlan_broadcast_enqueue()")

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:05:54 -07:00
Eric Dumazet
441ec8b5bd ipvlan: ipvlan_handle_mode_l2() refactoring
Reduce indentation level, and add a likely() clause
as we expect to process more unicast packets than multicast ones.

No functional change, this eases the following patch review.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:05:54 -07:00
Chris J Arges
b258cba1e0 net: Add net_cookie to Dead loop messages
Network devices can have the same name within different network namespaces.
To help distinguish these devices, add the net_cookie value which can be
used to identify the netns.

Signed-off-by: Chris J Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/20260408191056.1036330-1-carges@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:05:02 -07:00
Jakub Kicinski
cea470a694 Merge branch 'net-dsa-tag_rtl8_4-fixes-doc-and-set-keep'
Luiz Angelo Daros de Luca says:

====================
net: dsa: tag_rtl8_4: fixes doc and set keep

This small series addresses two points in the rtl8_4 tagger used by the
realtel rtl8365mb driver.

The first patch updates the documentation of the tag format while the
second patch sets the KEEP flag bit, ensuring that the switch
respects the frame's VLAN format as provided by the kernel.

These patches were previously part of a larger series but are being
submitted independently as they are self-contained and already
received review.

Link: https://patch.msgid.link/CAD++jLmX31KfhGXA6SMAPXb14dHSC1t4JQZ=PQvjh-3hUcnzJA@mail.gmail.com
====================

Link: https://patch.msgid.link/20260408-realtek_fixes-v1-0-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:04:11 -07:00
Luiz Angelo Daros de Luca
82f37bd9a4 net: dsa: tag_rtl8_4: set KEEP flag
KEEP=1 is needed because we should respect the format of the packet as
the kernel sends it to us. Unless tx forward offloading is used, the
kernel is giving us the packet exactly as it should leave the specified
port on the wire. Until now this was not needed because the ports were
always functioning in a standalone mode in a VLAN-unaware way, so the
switch would not tag or untag frames anyway. But arguably it should have
been KEEP=1 all along.

Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260408-realtek_fixes-v1-2-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:03:55 -07:00
Alvin Šipraga
297e1f411e net: dsa: tag_rtl8_4: update format description
Document the updated tag layout fields (EFID, VSEL/VIDX) and clarify
which bits are set/cleared when emitting tags.

Co-developed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260408-realtek_fixes-v1-1-915ff1404d56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 09:03:54 -07:00
Jakub Kicinski
17ad4759a0 Merge branch 'wangxun-improvement'
Jiawen Wu says:

====================
Wangxun improvement

This patch series cleans up the code and enhances the implementation.
====================

Link: https://patch.msgid.link/20260407025616.33652-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:31 -07:00
Jiawen Wu
40637e4a44 net: libwx: improve flow control setting
Save the current mode of flow control, and enhance the statistics of
pause frames.

The received pause frames are divided into XON and XOFF to be counted.
And due to the hardware defect of SP devices, XON packets cannot be
trasmitted correctly, so Tx XON pause is disabled by default for those
devices.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-10-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:29 -07:00
Jiawen Wu
1dd9b0dafd net: libwx: wrap-around and reset qmprc counter
The WX_PX_MPRC registers are not clear-on-read hardware counters. The
previous implementation directly read and accumulated these 32-bit values
into a 64-bit software counter. Now implement a rd32_wrap() helper
function to calculate the delta counter to correct the statistic.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-9-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:29 -07:00
Jiawen Wu
dc33e52b8c net: wangxun: schedule hardware stats update in watchdog
Hardware statistics should be updated periodically in the watchdog to
prevent 32-bit registers from overflowing. This is also required for the
upcoming pause frame accounting logic, which relies on regular statistics
sampling.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-8-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
58f6303572 net: wangxun: reorder timer and work sync cancellations
When removing the device, timer_delete_sync(&wx->service_timer) is
called in .ndo_stop() after cancel_work_sync(&wx->service_task). This
may cause new work to be queued after device down.

Move unregister_netdev() before cancel_work_sync(), and use
timer_shutdown_sync() to prevent the timer from being re-armed.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-7-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
b736ebed93 net: wangxun: move ethtool_ops.set_channels into libwx
Since function ops wx->setup_tc() is set in txgbe and ngbe,
ethtool_ops.set_channels can be implemented in libwx to reduce
duplicated code.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-6-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
d48df7e7c3 net: wangxun: replace busy-wait reset flag with kernel mutex
Replace the busy-wait loop using test_and_set_bit(WX_STATE_RESETTING)
with a proper per-device mutex to serialize reset operations.

The reset flag is reserved for other code paths (like watchdog), which
need tocheck if a reset is in process.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
9bc29a87fb net: ngbe: remove redundant macros
NGBE_NCSI_SUP and NGBE_NCSI_MASK are duplicate-defined, they can be
replaced by the macros defined in libwx. Just remove them.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
752157d9ed net: ngbe: move the WOL functions to libwx
Remove duplicate-defined register macros, move the WOL implementation to
the library module. So that the WOL functions can be reused in txgbe
later.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:28 -07:00
Jiawen Wu
4d19654dac net: ngbe: remove netdev->ethtool->wol_enabled setting
netdev->ethtool->wol_enabled is set in ethtool core code, so remove the
redundant setting in ngbe_set_wol().

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:42:27 -07:00
Nora Schiffer
436e9e48ca net: ethernet: ti: am65-cpsw: add support for J722S SoC family
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII.

Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Link: https://patch.msgid.link/6118e81358d47f455e4c1dbddf3ece6f3329e184.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:29:03 -07:00
Nora Schiffer
f757a2da6d dt-bindings: net: ti: k3-am654-cpsw-nuss: Add ti,j722s-cpsw-nuss compatible
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII. The AM64 compatible ti,am642-cpsw-nuss is used as a
fallback.

Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/191e9f7e3a6c14eabe891a98c5fb646766479c0a.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:29:03 -07:00
Jakub Kicinski
d24b443429 Merge branch 'dpll-zl3073x-add-ref-sync-pair-support'
Ivan Vecera says:

====================
dpll: zl3073x: add ref-sync pair support

This series adds Reference-Sync pair support to the ZL3073x DPLL driver.
A Ref-Sync pair consists of a clock reference and a low-frequency sync
signal (e.g. 1 PPS) where the DPLL locks to the clock reference but
phase-aligns to the sync reference.

Patches 1-3 are preparatory cleanups and helper additions:
- Clean up esync get/set callbacks with early returns and use the
  zl3073x_out_is_ndiv() helper
- Convert open-coded clear-and-set bitfield patterns to FIELD_MODIFY()
- Add ref sync control and output clock type accessor helpers

Patch 4 adds the 'ref-sync-sources' phandle-array property to the
dpll-pin device tree binding schema and updates the ZL3073x binding
examples.

Patch 5 implements the driver support:
- ref_sync_get/set callbacks with frequency validation
- Automatic sync source exclusion from reference selection
- Device tree based ref-sync pair registration

Tested and verified on Microchip EDS2 (pcb8385) development board.
====================

Link: https://patch.msgid.link/20260408102716.443099-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:44 -07:00
Ivan Vecera
14f269ae69 dpll: zl3073x: add ref-sync pair support
Add support for ref-sync pair registration using the 'ref-sync-sources'
phandle property from device tree. A ref-sync pair consists of a clock
reference and a low-frequency sync signal where the DPLL locks to the
clock reference but phase-aligns to the sync reference.

The implementation:
- Stores fwnode handle in zl3073x_dpll_pin during pin registration
- Adds ref_sync_get/set callbacks to read and write the sync control
  mode and pair registers
- Validates ref-sync frequency constraints: sync signal must be 8 kHz
  or less, clock reference must be 1 kHz or more and higher than sync
- Excludes sync source from automatic reference selection by setting
  its priority to NONE on connect; on disconnect the priority is left
  as NONE and the user must explicitly make the pin selectable again
- Iterates ref-sync-sources phandles to register declared pairings
  via dpll_pin_ref_sync_pair_add()

Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-6-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:34 -07:00
Ivan Vecera
a1a702090d dt-bindings: dpll: add ref-sync-sources property
Add ref-sync-sources phandle-array property to the dpll-pin schema
allowing board designers to declare which input pins can serve as
sync sources in a Reference-Sync pair.  A Ref-Sync pair consists of
a clock reference and a low-frequency sync signal where the DPLL locks
to the clock but phase-aligns to the sync reference.

Update both examples in the Microchip ZL3073x binding to demonstrate
the new property with a 1 PPS sync source paired to a clock source.

Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:34 -07:00
Ivan Vecera
63009eb92b dpll: zl3073x: add ref sync and output clock type helpers
Add ZL_REF_SYNC_CTRL_MODE_REFSYNC_PAIR and ZL_REF_SYNC_CTRL_PAIR
register definitions.

Add inline helpers to get and set the sync control mode and sync pair
fields of the reference sync control register:

  zl3073x_ref_sync_mode_get/set() - ZL_REF_SYNC_CTRL_MODE field
  zl3073x_ref_sync_pair_get/set() - ZL_REF_SYNC_CTRL_PAIR field

Add inline helpers to get and set the clock type field of the output
mode register:

  zl3073x_out_clock_type_get/set() - ZL_OUTPUT_MODE_CLOCK_TYPE field

Convert existing esync callbacks to use the new helpers.

Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:33 -07:00
Ivan Vecera
737cb6195c dpll: zl3073x: use FIELD_MODIFY() for clear-and-set patterns
Replace open-coded clear-and-set bitfield operations with
FIELD_MODIFY().

Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:33 -07:00
Ivan Vecera
3c8c39768b dpll: zl3073x: clean up esync get/set and use zl3073x_out_is_ndiv()
Return -EOPNOTSUPP early in esync_get callbacks when esync is not
supported instead of conditionally populating the range at the end.
This simplifies the control flow by removing the finish label/goto
in the output variant and the conditional range assignment in both
input and output variants.

Replace open-coded N-div signal format switch statements with
zl3073x_out_is_ndiv() helper in esync_get, esync_set and
frequency_set callbacks.

Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-12 08:27:33 -07:00
Aleksandr Loktionov
3f3a2aefbc iavf: fix kernel-doc comment style in iavf_ethtool.c
iavf_ethtool.c contains 31 kernel-doc comment blocks using the legacy
`**/` terminator instead of the correct single `*/`. Two function
headers also use a colon separator (`iavf_get_channels:`,
`iavf_set_channels:`) instead of the ` - ` dash required by kernel-doc.

Additionally several comments embed their return-value descriptions in
the body paragraph, producing `scripts/kernel-doc -Wreturn` warnings.
Void functions that incorrectly say "Returns ..." are also rephrased.

Fix all issues across the full file:
 - Replace every `**/` terminator with `*/`.
 - Change `function_name:` doc headers to `function_name -`.
 - Move inline "Returns ..." sentences into dedicated `Return:` sections
   for non-void functions (iavf_get_msglevel, iavf_get_rxnfc,
   iavf_set_channels, iavf_get_rxfh_key_size, iavf_get_rxfh_indir_size,
   iavf_get_rxfh, iavf_set_rxfh).
 - Rephrase body descriptions in void functions that incorrectly said
   "Returns ..." (iavf_get_drvinfo, iavf_get_ringparam, iavf_get_coalesce).
 - Remove boilerplate body text for iavf_get_rxfh_key_size and
   iavf_get_rxfh_indir_size; the `Return:` line now conveys the same
   information without the vague "Returns the table size." sentence.

Suggested-by: Anthony L. Nguyen <anthony.l.nguyen@intel.com>
Suggested-by: Leszek Pepiak <leszek.pepiak@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260409093020.3808687-1-aleksandr.loktionov@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-10 16:05:44 -07:00
Jakub Kicinski
43f7081d52 Merge branch 'net-dsa-mxl862xx-vlan-support-and-minor-improvements'
Daniel Golle says:

====================
net: dsa: mxl862xx: VLAN support and minor improvements

This series adds VLAN offloading to the mxl862xx DSA driver along
with two minor improvements to port setup and bridge configuration.
VLAN support uses a hybrid architecture combining the Extended VLAN
engine for PVID insertion and tag stripping with the VLAN Filter
engine for per-port VID membership, both drawing from shared
1024-entry hardware pools partitioned across user ports at probe time.
====================

Link: https://patch.msgid.link/cover.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2026-04-10 16:03:49 -07:00