[ Upstream commit a4c5a468c6 ]
Different connectivity boards may be attached to the same platform. For
example, QCA6698-based boards can support either a two-antenna or
three-antenna solution, both of which work on the sa8775p-ride platform.
Due to differences in connectivity boards and variations in RF
performance from different foundries, different NVM configurations are
used based on the board ID.
Therefore, in the firmware-name property, if the NVM file has an
extension, the NVM file will be used. Otherwise, the system will first
try the .bNN (board ID) file, and if that fails, it will fall back to
the .bin file.
Possible configurations:
firmware-name = "QCA6698/hpnv21";
firmware-name = "QCA6698/hpnv21.bin";
Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: a2fad24894 ("Bluetooth: qca: Fix poor RF performance for WCN6855")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f88192d233 ]
[Why]
the offset address of mmCLK5_spll_field_8 was incorrect for dcn35
which causes SSC not to be enabled.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Lo-An Chen <lo-an.chen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04bc93cf49 ]
If KVM emulates an EOI for L1's virtual APIC while L2 is active, defer
updating GUEST_INTERUPT_STATUS.SVI, i.e. the VMCS's cache of the highest
in-service IRQ, until L1 is active, as vmcs01, not vmcs02, needs to track
vISR. The missed SVI update for vmcs01 can result in L1 interrupts being
incorrectly blocked, e.g. if there is a pending interrupt with lower
priority than the interrupt that was EOI'd.
This bug only affects use cases where L1's vAPIC is effectively passed
through to L2, e.g. in a pKVM scenario where L2 is L1's depriveleged host,
as KVM will only emulate an EOI for L1's vAPIC if Virtual Interrupt
Delivery (VID) is disabled in vmc12, and L1 isn't intercepting L2 accesses
to its (virtual) APIC page (or if x2APIC is enabled, the EOI MSR).
WARN() if KVM updates L1's ISR while L2 is active with VID enabled, as an
EOI from L2 is supposed to affect L2's vAPIC, but still defer the update,
to try to keep L1 alive. Specifically, KVM forwards all APICv-related
VM-Exits to L1 via nested_vmx_l1_wants_exit():
case EXIT_REASON_APIC_ACCESS:
case EXIT_REASON_APIC_WRITE:
case EXIT_REASON_EOI_INDUCED:
/*
* The controls for "virtualize APIC accesses," "APIC-
* register virtualization," and "virtual-interrupt
* delivery" only come from vmcs12.
*/
return true;
Fixes: c7c9c56ca2 ("x86, apicv: add virtual interrupt delivery support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/kvm/20230312180048.1778187-1-jason.cj.chen@intel.com
Reported-by: Markku Ahvenjärvi <mankku@gmail.com>
Closes: https://lore.kernel.org/all/20240920080012.74405-1-mankku@gmail.com
Cc: Janne Karhunen <janne.karhunen@gmail.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
[sean: drop request, handle in VMX, write changelog]
Tested-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20241128000010.4051275-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adfec1f459 ]
Inline kvm_get_apic_mode() in lapic.h to avoid a CALL+RET as well as an
export. The underlying kvm_apic_mode() helper is public information, i.e.
there is no state/information that needs to be hidden from vendor modules.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241009181742.1128779-5-seanjc@google.com
Link: https://lore.kernel.org/r/20241101183555.1794700-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 04bc93cf49 ("KVM: nVMX: Defer SVI update to vmcs01 on EOI when L2 is active w/o VID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d91060e342 ]
Access KVM's emulated APIC base MSR value directly instead of bouncing
through a helper, as there is no reason to add a layer of indirection, and
there are other MSRs with a "set" but no "get", e.g. EFER.
No functional change intended.
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20241009181742.1128779-4-seanjc@google.com
Link: https://lore.kernel.org/r/20241101183555.1794700-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 04bc93cf49 ("KVM: nVMX: Defer SVI update to vmcs01 on EOI when L2 is active w/o VID")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bf334beb3 ]
[BUG]
If submit_one_sector() failed inside extent_writepage_io() for sector
size < page size cases (e.g. 4K sector size and 64K page size), then
we can hit double ordered extent accounting error.
This should be very rare, as submit_one_sector() only fails when we
failed to grab the extent map, and such extent map should exist inside
the memory and has been pinned.
[CAUSE]
For example we have the following folio layout:
0 4K 32K 48K 60K 64K
|//| |//////| |///|
Where |///| is the dirty range we need to writeback. The 3 different
dirty ranges are submitted for regular COW.
Now we hit the following sequence:
- submit_one_sector() returned 0 for [0, 4K)
- submit_one_sector() returned 0 for [32K, 48K)
- submit_one_sector() returned error for [60K, 64K)
- btrfs_mark_ordered_io_finished() called for the whole folio
This will mark the following ranges as finished:
* [0, 4K)
* [32K, 48K)
Both ranges have their IO already submitted, this cleanup will
lead to double accounting.
* [60K, 64K)
That's the correct cleanup.
The only good news is, this error is only theoretical, as the target
extent map is always pinned, thus we should directly grab it from
memory, other than reading it from the disk.
[FIX]
Instead of calling btrfs_mark_ordered_io_finished() for the whole folio
range, which can touch ranges we should not touch, instead
move the error handling inside extent_writepage_io().
So that we can cleanup exact sectors that ought to be submitted but failed.
This provides much more accurate cleanup, avoiding the double accounting.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72dad8e377 ]
[BUG]
When running btrfs with block size (4K) smaller than page size (64K,
aarch64), there is a very high chance to crash the kernel at
generic/750, with the following messages:
(before the call traces, there are 3 extra debug messages added)
BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental
BTRFS info (device dm-3): checking UUID tree
hrtimer: interrupt took 5451385 ns
BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28
BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs]
CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ #89
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs]
pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs]
lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs]
Call trace:
can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P)
can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L)
btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs]
extent_writepage+0x10c/0x3b8 [btrfs]
extent_write_cache_pages+0x21c/0x4e8 [btrfs]
btrfs_writepages+0x94/0x160 [btrfs]
do_writepages+0x74/0x190
filemap_fdatawrite_wbc+0x74/0xa0
start_delalloc_inodes+0x17c/0x3b0 [btrfs]
btrfs_start_delalloc_roots+0x17c/0x288 [btrfs]
shrink_delalloc+0x11c/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_data_space+0x180/0x228 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0
CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ #89
Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022
Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write)
pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : process_one_work+0x110/0x680
lr : worker_thread+0x1bc/0x360
Call trace:
process_one_work+0x110/0x680 (P)
worker_thread+0x1bc/0x360 (L)
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception
SMP: stopping secondary CPUs
SMP: failed to stop secondary CPUs 2-3
Dumping ftrace buffer:
(ftrace buffer empty)
Kernel Offset: 0x275bb9540000 from 0xffff800080000000
PHYS_OFFSET: 0xffff8fbba0000000
CPU features: 0x100,00000070,00801250,8201720b
[CAUSE]
The above warning is triggered immediately after the delalloc range
failure, this happens in the following sequence:
- Range [1568K, 1636K) is dirty
1536K 1568K 1600K 1636K 1664K
| |/////////|////////| |
Where 1536K, 1600K and 1664K are page boundaries (64K page size)
- Enter extent_writepage() for page 1536K
- Enter run_delalloc_nocow() with locked page 1536K and range
[1568K, 1636K)
This is due to the inode having preallocated extents.
- Enter cow_file_range() with locked page 1536K and range
[1568K, 1636K)
- btrfs_reserve_extent() only reserved two extents
The main loop of cow_file_range() only reserved two data extents,
Now we have:
1536K 1568K 1600K 1636K 1664K
| |<-->|<--->|/|///////| |
1584K 1596K
Range [1568K, 1596K) has an ordered extent reserved.
- btrfs_reserve_extent() failed inside cow_file_range() for file offset
1596K
This is already a bug in our space reservation code, but for now let's
focus on the error handling path.
Now cow_file_range() returned -ENOSPC.
- btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE
Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range
[1568K, 1636K)
Function btrfs_cleanup_ordered_extents() normally needs to skip the
ranges inside the folio, as it will normally be cleaned up by
extent_writepage().
Such split error handling is already problematic in the first place.
What's worse is the folio range skipping itself, which is not taking
subpage cases into consideration at all, it will only skip the range
if the page start >= the range start.
In our case, the page start < the range start, since for subpage cases
we can have delalloc ranges inside the folio but not covering the
folio.
So it doesn't skip the page range at all.
This means all the ordered extents, both [1568K, 1584K) and
[1584K, 1596K) will be marked as IOERR.
And these two ordered extents have no more pending ios, they are marked
finished, and *QUEUED* to be deleted from the io tree.
- extent_writepage() do error cleanup
Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K).
Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the
deletion from io tree is async, it may or may not happen at this
time.
If the ranges have not yet been removed, we will do double cleaning on
those ranges, triggering the above ordered extent warnings.
In theory there are other bugs, like the cleanup in extent_writepage()
can cause double accounting on ranges that are submitted asynchronously
(compression for example).
But that's much harder to trigger because normally we do not mix regular
and compression delalloc ranges.
[FIX]
The folio range split is already buggy and not subpage compatible, it
was introduced a long time ago where subpage support was not even considered.
So instead of splitting the ordered extents cleanup into the folio range
and out of folio range, do all the cleanup inside writepage_delalloc().
- Pass @NULL as locked_folio for btrfs_cleanup_ordered_extents() in
btrfs_run_delalloc_range()
- Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc()
failed
So all ordered extents are only cleaned up by
btrfs_run_delalloc_range().
- Handle the ranges that already have ordered extents allocated
If part of the folio already has ordered extent allocated, and
btrfs_run_delalloc_range() failed, we also need to cleanup that range.
Now we have a concentrated error handling for ordered extents during
btrfs_run_delalloc_range().
Fixes: d1051d6ebf ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 011a9a1f24 ]
As extent_writepage() is internal helper we should use our inode type,
so change it from struct inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f71202665 ]
Since there is no user of reader locks, rename the writer locks into a
more generic name, by removing the "_writer" part from the name.
And also rename btrfs_subpage::writer into btrfs_subpage::locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 336e69f302 ]
Since commit d7172f52e9 ("btrfs: use per-buffer locking for
extent_buffer reading"), metadata read no longer relies on the subpage
reader locking.
This means we do not need to maintain a different metadata/data split
for locking, so we can convert the existing reader lock users by:
- add_ra_bio_pages()
Convert to btrfs_folio_set_writer_lock()
- end_folio_read()
Convert to btrfs_folio_end_writer_lock()
- begin_folio_read()
Convert to btrfs_folio_set_writer_lock()
- folio_range_has_eb()
Remove the subpage->readers checks, since it is always 0.
- Remove btrfs_subpage_start_reader() and btrfs_subpage_end_reader()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8511074c42 ]
This function is not really suitable to lock a folio, as it lacks the
proper mapping checks, thus the locked folio may not even belong to
btrfs.
And due to the above reason, the last user inside lock_delalloc_folios()
is already removed, and we can remove this function.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c96d0e3921 ]
Currently we only mark sectors as locked if there is a *NEW* delalloc
range for it.
But NEW delalloc range is not the same as dirty sectors we want to
submit, e.g:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above 64K page size case, writepage_delalloc() for page 0 will find
and lock the delalloc range [32K, 96K), which is beyond the page
boundary.
Then when writepage_delalloc() is called for the page 64K, since [64K,
96K) is already locked, only [120K, 128K) will be locked.
This means, although range [64K, 96K) is dirty and will be submitted
later by extent_writepage_io(), it will not be marked as locked.
This is fine for now, as we call btrfs_folio_end_writer_lock_bitmap() to
free every non-compressed sector, and compression is only allowed for
full page range.
But this is not safe for future sector perfect compression support, as
this can lead to double folio unlock:
Thread A | Thread B
---------------------------------------+--------------------------------
| submit_one_async_extent()
| |- extent_clear_unlock_delalloc()
extent_writepage() | |- btrfs_folio_end_writer_lock()
|- btrfs_folio_end_writer_lock_bitmap()| |- btrfs_subpage_end_and_test_writer()
| | | |- atomic_sub_and_test()
| | | /* Now the atomic value is 0 */
|- if (atomic_read() == 0) | |
|- folio_unlock() | |- folio_unlock()
The root cause is the above range [64K, 96K) is dirtied and should also
be locked but it isn't.
So to make everything more consistent and prepare for the incoming
sector perfect compression, mark all dirty sectors as locked.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bca8eb077 ]
Currently for subpage (sector size < page size) cases, we reuse subpage
locked bitmap to find out all delalloc ranges we have locked, and run
all those found ranges.
However such reuse is not perfect, e.g.:
0 32K 64K 96K 128K
| |////////||///////| |////|
120K
For above range, writepage_delalloc() for page 0 will handle the range
[32K, 96k), note delalloc range can be beyond the page boundary.
But writepage_delalloc() for page 64K will only handle range [120K,
128K), as the previous run on page 0 has already handled range [64K,
96K).
Meanwhile for the writeback we should expect range [64K, 96K) to also be
locked, this leads to the mismatch from locked bitmap and delalloc
range.
This is not causing problems yet, but it's still an inconsistent
behavior.
So instead of relying on the subpage locked bitmap, move the delalloc
range search using local @delalloc_bitmap, so that we can remove the
existing btrfs_folio_find_writer_locked().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 928b4de66e ]
The function extent_writepage_io() will submit the dirty sectors inside
the page for the write.
But recently to co-operate with the incoming subpage compression
enhancement, a new bitmap is introduced to
btrfs_bio_ctrl::submit_bitmap, to only avoid a subset of the dirty
range.
This is because we can have the following cases with 64K page size:
0 16K 32K 48K 64K
| |/////////| |/|
52K
For range [16K, 32K), we queue the dirty range for compression, which is
ran in a delayed workqueue.
Then for range [48K, 52K), we go through the regular submission path.
In that case, our btrfs_bio_ctrl::submit_bitmap will exclude the range
[16K, 32K).
The dirty flags for the range [16K, 32K) is only cleared when the
compression is done, by the extent_clear_unlock_delalloc() call inside
submit_one_async_extent().
This patch fix the false alert by removing the
btrfs_folio_assert_not_dirty() check, since it's no longer correct for
subpage compression cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 8bf334beb3 ("btrfs: fix double accounting race when extent_writepage_io() failed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55039832f9 ]
This is a set of squashed commits to facilitate smooth applying to
stable. Each commit message is retained for reference.
1) Allow a GGTT mapped batch to be submitted to user exec queue
For a OA use case, one of the HW registers needs to be modified by
submitting an MI_LOAD_REGISTER_IMM command to the users exec queue, so
that the register is modified in the user's hardware context. In order
to do this a batch that is mapped in GGTT, needs to be submitted to the
user exec queue. Since all user submissions use q->vm and hence PPGTT,
add some plumbing to enable submission of batches mapped in GGTT.
v2: ggtt is zero-initialized, so no need to set it false (Matt Brost)
2) xe/oa: Use MI_LOAD_REGISTER_IMMEDIATE to enable OAR/OAC
To enable OAR/OAC, a bit in RING_CONTEXT_CONTROL needs to be set.
Setting this bit cause the context image size to change and if not done
correct, can cause undesired hangs.
Current code uses a separate exec_queue to modify this bit and is
error-prone. As per HW recommendation, submit MI_LOAD_REGISTER_IMM to
the target hardware context to modify the relevant bit.
In v2 version, an attempt to submit everything to the user-queue was
made, but it failed the unprivileged-single-ctx-counters test. It
appears that the OACTXCONTROL must be modified from a remote context.
In v3 version, all context specific register configurations were moved
to use LOAD_REGISTER_IMMEDIATE and that seems to work well. This is a
cleaner way, since we can now submit all configuration to user
exec_queue and the fence handling is simplified.
v2:
(Matt)
- set job->ggtt to true if create job is successful
- unlock vm on job error
(Ashutosh)
- don't wait on job submission
- use kernel exec queue where possible
v3:
(Ashutosh)
- Fix checkpatch issues
- Remove extra spaces/new-lines
- Add Fixes: and Cc: tags
- Reset context control bit when OA stream is closed
- Submit all config via MI_LOAD_REGISTER_IMMEDIATE
(Umesh)
- Update commit message for v3 experiment
- Squash patches for easier port to stable
v4:
(Ashutosh)
- No need to pass q to xe_oa_submit_bb
- Do not support exec queues with width > 1
- Fix disabling of CTX_CTRL_OAC_CONTEXT_ENABLE
v5:
(Ashutosh)
- Drop reg_lri related comments
- Use XE_OA_SUBMIT_NO_DEPS in xe_oa_load_with_lri
Fixes: 8135f1c09d ("drm/xe/oa: Don't reset OAC_CONTEXT_ENABLE on OA stream close")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> # commit 1
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241220171919.571528-2-umesh.nerlige.ramappa@intel.com
Stable-dep-of: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fb4350a28 ]
Add input fence dependencies which will make OA configuration wait till
these dependencies are met (till input fences signal).
v2: Change add_deps arg to xe_oa_submit_bb from bool to enum (Matt Brost)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-4-ashutosh.dixit@intel.com
Stable-dep-of: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8507a25ce ]
Now that we have laid the groundwork, introduce OA sync properties in the
uapi and parse the input xe_sync array as is done elsewhere in the
driver. Also add DRM_XE_OA_CAPS_SYNCS bit in OA capabilities for userspace.
v2: Fix and document DRM_XE_SYNC_TYPE_USER_FENCE for OA (Matt B)
Add DRM_XE_OA_CAPS_SYNCS bit to OA capabilities (Jose)
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-3-ashutosh.dixit@intel.com
Stable-dep-of: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dddcb19ad4 ]
When we introduce xe_syncs, we don't wait for internal OA programming
batches to complete. That is, xe_syncs are signaled asynchronously. In
anticipation for this, separate out batch submission from waiting for
completion of those batches.
v2: Change return type of xe_oa_submit_bb to "struct dma_fence *" (Matt B)
v3: Retain init "int err = 0;" in xe_oa_submit_bb (Jose)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241022200352.1192560-2-ashutosh.dixit@intel.com
Stable-dep-of: f0ed39830e ("xe/oa: Fix query mode of operation for OAR/OAC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
PROT_MTE (memory tagging extensions) is not supported on all user mmap()
types for various reasons (memory attributes, backing storage, CoW
handling). The arm64 arch_validate_flags() function checks whether the
VM_MTE_ALLOWED flag has been set for a vma during mmap(), usually by
arch_calc_vm_flag_bits().
Linux prior to 6.13 does not support PROT_MTE hugetlb mappings. This was
added by commit 25c17c4b55 ("hugetlb: arm64: add mte support").
However, earlier kernels inadvertently set VM_MTE_ALLOWED on
(MAP_ANONYMOUS | MAP_HUGETLB) mappings by only checking for
MAP_ANONYMOUS.
Explicitly check MAP_HUGETLB in arch_calc_vm_flag_bits() and avoid
setting VM_MTE_ALLOWED for such mappings.
Fixes: 9f3419315f ("arm64: mte: Add PROT_MTE support to mmap() and mprotect()")
Cc: <stable@vger.kernel.org> # 5.10.x-6.12.x
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78dafe1cf3 upstream.
During socket release, sock_orphan() is called without considering that it
sets sk->sk_wq to NULL. Later, if SO_LINGER is enabled, this leads to a
null pointer dereferenced in virtio_transport_wait_close().
Orphan the socket only after transport release.
Partially reverts the 'Fixes:' commit.
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
lock_acquire+0x19e/0x500
_raw_spin_lock_irqsave+0x47/0x70
add_wait_queue+0x46/0x230
virtio_transport_release+0x4e7/0x7f0
__vsock_release+0xfd/0x490
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x35e/0xa90
__x64_sys_close+0x78/0xd0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reported-by: syzbot+9d55b199192a4be7d02c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9d55b199192a4be7d02c
Fixes: fcdd2242c0 ("vsock: Keep the binding until socket destruction")
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-1-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8802766324 upstream.
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
Cc: stable@vger.kernel.org
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Fixes: 2fcabce2d7 ("io_uring: disallow mixed provided buffer group registrations")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d4114a1d3 upstream.
Address a lockdep warning triggered by the use of the clk_gating.lock before
it is properly initialized. The warning is as follows:
[ 4.388838] INFO: trying to register non-static key.
[ 4.395673] The code is fine but needs lockdep annotation, or maybe
[ 4.402118] you didn't initialize this object before use?
[ 4.407673] turning off the locking correctness validator.
[ 4.413334] CPU: 5 UID: 0 PID: 58 Comm: kworker/u32:1 Not tainted 6.12-rc1 #185
[ 4.413343] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
[ 4.413362] Call trace:
[ 4.413364] show_stack+0x18/0x24 (C)
[ 4.413374] dump_stack_lvl+0x90/0xd0
[ 4.413384] dump_stack+0x18/0x24
[ 4.413392] register_lock_class+0x498/0x4a8
[ 4.413400] __lock_acquire+0xb4/0x1b90
[ 4.413406] lock_acquire+0x114/0x310
[ 4.413413] _raw_spin_lock_irqsave+0x60/0x88
[ 4.413423] ufshcd_setup_clocks+0x2c0/0x490
[ 4.413433] ufshcd_init+0x198/0x10ec
[ 4.413437] ufshcd_pltfrm_init+0x600/0x7c0
[ 4.413444] ufs_qcom_probe+0x20/0x58
[ 4.413449] platform_probe+0x68/0xd8
[ 4.413459] really_probe+0xbc/0x268
[ 4.413466] __driver_probe_device+0x78/0x12c
[ 4.413473] driver_probe_device+0x40/0x11c
[ 4.413481] __device_attach_driver+0xb8/0xf8
[ 4.413489] bus_for_each_drv+0x84/0xe4
[ 4.413495] __device_attach+0xfc/0x18c
[ 4.413502] device_initial_probe+0x14/0x20
[ 4.413510] bus_probe_device+0xb0/0xb4
[ 4.413517] deferred_probe_work_func+0x8c/0xc8
[ 4.413524] process_scheduled_works+0x250/0x658
[ 4.413534] worker_thread+0x15c/0x2c8
[ 4.413542] kthread+0x134/0x200
[ 4.413550] ret_from_fork+0x10/0x20
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b8 ("scsi: ufs: core: Introduce a new clock_gating lock")
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d364eee14c upstream.
Scope based guard/cleanup macros should not be used together with goto
labels. Hence, remove the goto label.
Fixes: 6c093d5a5b ("cpufreq/amd-pstate: convert mutex use to guard()")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-2-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c1df813e0 upstream.
The PCIE wake bit is to control PCIE wake signal to host. When PCIE is
going down, clear this bit to prevent waking up host unexpectedly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20241111063835.15454-1-pkshih@realtek.com
Signed-off-by: Zenm Chen <zenmchen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b7c05598a upstream.
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Ihor Solodrai <ihor.solodrai@pm.me>
Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42602e3a06 upstream.
As we can see from the title, when I compiled the selftests/bpf, I
saw the error:
implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
skel->bss->tid = gettid();
^~~~~~
getgid
Directly call the syscall solves this issue.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20241029074627.80289-1-kerneljasonxing@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5cc2db3712 upstream.
__static_call_update_early() has a check for early_boot_irqs_disabled, but
is used before early_boot_irqs_disabled is set up in start_kernel().
Xen PV has always special cased early_boot_irqs_disabled, but Xen PVH does
not and falls over the BUG when booting as dom0.
It is very suspect that early_boot_irqs_disabled starts as 0, becomes 1 for
a time, then becomes 0 again, but as this needs backporting to fix a
breakage in a security fix, dropping the BUG_ON() is the far safer option.
Fixes: 0ef8047b73 ("x86/static-call: provide a way to do very early static-call updates")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219620
Reported-by: Alex Zenla <alex@edera.dev>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alex Zenla <alex@edera.dev>
Link: https://lore.kernel.org/r/20241221211046.6475-1-andrew.cooper3@citrix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ec920bb97 upstream.
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07089083a5 upstream.
The commit
afd2627f72 ("tracing: Check "%s" dereference via the field and not the TP_printk format")
exposes potential UAFs in the xe_bo_move trace event.
Fix those by avoiding dereferencing the
xe_mem_type_to_name[] array at TP_printk time.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
Fixes: e46d3f813a ("drm/xe/trace: Extract bo, vm, vma traces")
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.11+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241223134250.14345-1-thomas.hellstrom@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21f1435b1e upstream.
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638e ("drm/v3d: Stop the active perfmon before being destroyed").
Cc: stable@vger.kernel.org # v5.15+
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9f55e2abf upstream.
During suspend/resume process all connectors are explicitly disabled and
then reenabled. However resume fails because of the connector_status check:
[dpu error]connector not connected 3
[drm:drm_mode_config_helper_resume [drm_kms_helper]] *ERROR* Failed to resume (-22)
It doesn't make sense to check for the Writeback connected status (and
other drivers don't perform such check), so drop the check.
It wasn't a problem before the commit 71174f362d ("drm/msm/dpu: move
writeback's atomic_check to dpu_writeback.c"), since encoder's
atomic_check() is called under a different conditions that the
connector's atomic_check() (e.g. it is not called if there is no
connected CRTC or if the corresponding connector is not a part of the
new state).
Fixes: 71174f362d ("drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c")
Cc: stable@vger.kernel.org
Reported-by: Leonard Lausen <leonard@lausen.nl>
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/57
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Tested-by: György Kurucz <me@kuruczgy.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/627828/
Link: https://lore.kernel.org/r/20241209-dpu-fix-wb-v4-1-7fe93059f9e0@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce55101e6b upstream.
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
Cc: stable@vger.kernel.org
Fixes: e3b1f369db ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/624681/
Link: https://lore.kernel.org/r/20241115-x1e80100-dp2-fix-v1-1-727b9fe6f390@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6389e616fa upstream.
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f ("drm: rcar-du: Add R-Car DSI driver")
Fixes: 11696c5e89 ("drm: Place Renesas drivers in a separate dir")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a47f4b439 upstream.
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337e ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a73f2661 upstream.
The driver has a spinlock for protecting the irq_masks field and irq
enable registers. However, the driver misses protecting the irq status
registers which can lead to races.
Take the spinlock when accessing irqstatus too.
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: updated the desc]
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-6-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44b6730ab5 upstream.
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Co-developed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a527750d87 ]
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acc18e1c1d ]
After commit ac325fc2aa ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
$ ./check generic/418
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian0 6.13.0-rc7-btrfs-next-185+ #17 SMP PREEMPT_DYNAMIC Mon Feb 3 12:28:46 WET 2025
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
# --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
# +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
btrfs_release_folio() ->
__btrfs_release_folio() ->
try_release_extent_mapping() ->
try_release_extent_state()
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aa ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aa ("btrfs: do not hold the extent lock for entire read")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06de96faf7 ]
The double underscore naming scheme does not apply here, there's only
only get_extent_map(). As the definition is changed also pass the struct
btrfs_inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: acc18e1c1d ("btrfs: fix stale page cache after race between readahead and direct IO write")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 087c1faa59 ]
igmp6_send() can be called without RTNL or RCU being held.
Extend RCU protection so that we can safely fetch the net pointer
and avoid a potential UAF.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed6ae1f325 ]
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF.
Fixes: 1762f7e88e ("[NETNS][IPV6] ndisc - make socket control per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
