ARCH_ENABLE_THP_MIGRATION is supposed to be selected by arch Kconfig.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
For suspend to ram on j7200, use ti,j7200-padconf compatible to save and
restore pinctrl contexts.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231128-j7200-pinctrl-s2r-v1-3-704e7dc24460@bootlin.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Mark dynptr kfuncs as __weak to allow
verifier_global_subprogs/arg_ctx_{perf,kprobe,raw_tp} subtests to be
loadable on old kernels. Because bpf_dynptr_from_xdp() kfunc is used
from arg_tag_dynptr BPF program in progs/verifier_global_subprogs.c
*and* is not marked as __weak, loading any subtest from
verifier_global_subprogs fails on old kernels that don't have
bpf_dynptr_from_xdp() kfunc defined. Even if arg_tag_dynptr program
itself is not loaded, libbpf bails out on non-weak reference to
bpf_dynptr_from_xdp (that can't be resolved), which shared across all
programs in progs/verifier_global_subprogs.c.
So mark all dynptr-related kfuncs as __weak to unblock libbpf CI ([0]).
In the upcoming "kfunc in vmlinux.h" work we should make sure that
kfuncs are always declared __weak as well.
[0] https://github.com/libbpf/libbpf/actions/runs/7792673215/job/21251250831?pr=776#step:4:7961
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206004008.1541513-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
K3 Remoteproc R5 driver requires reserved memory carveouts and
mailbox configuration to instantiate the cores successfully.
Since this is a board level dependency, keep the R5 subsytem
disabled at SoC dtsi, otherwise it results in probe errors like
below during AM62P SK boot:
r5fss@79000000: reserved memory init failed, ret = -22
r5fss@79000000: k3_r5_cluster_rproc_init failed, ret = -22
r5fss@78000000: reserved memory init failed, ret = -22
r5fss@78000000: k3_r5_cluster_rproc_init failed, ret = -22
Fixes: b5080c7c1f ("arm64: dts: ti: k3-am62p: Add nodes for more IPs")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20240121134017.374992-1-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
If PERF_EVENT program has __arg_ctx argument with matching
architecture-specific pt_regs/user_pt_regs/user_regs_struct pointer
type, libbpf should still perform type rewrite for old kernels, but not
emit the warning. Fix copy/paste from kernel code where 0 is meant to
signify "no error" condition. For libbpf we need to return "true" to
proceed with type rewrite (which for PERF_EVENT program will be
a canonical `struct bpf_perf_event_data *` type).
Fixes: 9eea8fafe3 ("libbpf: fix __arg_ctx type enforcement for perf_event programs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240206002243.1439450-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Magnus Karlsson says:
====================
xsk: support redirect to any socket bound to the same umem
This patch set adds support for directing a packet to any socket bound
to the same umem. This makes it possible to use the XDP program to
select what socket the packet should be received on. The user can
populate the XSKMAP with various sockets and as long as they share the
same umem, the XDP program can pick any one of them.
The implementation is straight-forward. Instead of testing that the
incoming packet is targeting the same device and queue id as the
socket is bound to, just check that the umem the packet was received
on is the same as the socket we want it to be received on. This
guarantees that the redirect is legal as it is already in the correct
umem.
Patch #1 implements the feature and patch #2 adds documentation.
Thanks: Magnus
====================
Link: https://lore.kernel.org/r/20240205123553.22180-1-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add support for directing a packet to any socket bound to the same
umem. This makes it possible to use the XDP program to select what
socket the packet should be received on. The user can populate the
XSKMAP with various sockets and as long as they share the same umem,
the XDP program can pick any one of them.
Suggested-by: Yuval El-Hanany <yuvale@radware.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240205123553.22180-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kumar Kartikeya Dwivedi says:
====================
Transfer RCU lock state across subprog calls
David suggested during the discussion in [0] that we should handle RCU
locks in a similar fashion to spin locks where the verifier understands
when a lock held in a caller is released in callee, or lock taken in
callee is released in a caller, or the callee is called within a lock
critical section. This set extends the same semantics to RCU read locks
and adds a few selftests to verify correct behavior. This issue has also
come up for sched-ext programs.
This would now allow static subprog calls to be made without errors
within RCU read sections, for subprogs to release RCU locks of callers
and return to them, or for subprogs to take RCU lock which is later
released in the caller.
[0]: https://lore.kernel.org/bpf/20240204120206.796412-1-memxor@gmail.com
Changelog:
----------
v1 -> v2:
v1: https://lore.kernel.org/bpf/20240204230231.1013964-1-memxor@gmail.com
* Add tests for global subprog behaviour (Yafang)
* Add Acks, Tested-by (Yonghong, Yafang)
====================
Link: https://lore.kernel.org/r/20240205055646.1112186-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests covering the following cases:
- A static or global subprog called from within a RCU read section works
- A static subprog taking an RCU read lock which is released in caller works
- A static subprog releasing the caller's RCU read lock works
Global subprogs that leave the lock in an imbalanced state will not
work, as they are verified separately, so ensure those cases fail as
well.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240205055646.1112186-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow transferring an imbalanced RCU lock state between subprog calls
during verification. This allows patterns where a subprog call returns
with an RCU lock held, or a subprog call releases an RCU lock held by
the caller. Currently, the verifier would end up complaining if the RCU
lock is not released when processing an exit from a subprog, which is
non-ideal if its execution is supposed to be enclosed in an RCU read
section of the caller.
Instead, simply only check whether we are processing exit for frame#0
and do not complain on an active RCU lock otherwise. We only need to
update the check when processing BPF_EXIT insn, as copy_verifier_state
is already set up to do the right thing.
Suggested-by: David Vernet <void@manifault.com>
Tested-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240205055646.1112186-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
VP2 and VP3 are unused video ports and VP3 share the same parent
clock as VP1 causing issue with pixel clock setting for HDMI (VP1).
The current DM firmware does not support changing parent clock if it
is shared by another component. It returns 0 for the determine_rate
query before causing set_rate to set the clock at default maximum of
1.8GHz which is a lot more than the maximum frequency videoports can
support (600MHz) causing SYNC LOST issues.
So remove the parent clocks for unused VPs to avoid conflict.
Fixes: 6f8605fd7d ("arm64: dts: ti: k3-am69-sk: Add DP and HDMI support")
Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>
Tested-by: Enric Balletbo i Serra <eballetbo@redhat.com>
Link: https://lore.kernel.org/r/20240201142308.4954-1-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Kumar Kartikeya Dwivedi says:
====================
Enable static subprog calls in spin lock critical sections
This set allows a BPF program to make a call to a static subprog within
a bpf_spin_lock critical section. This problem has been hit in sched-ext
and ghOSt [0] as well, and is mostly an annoyance which is worked around
by inling the static subprog into the critical section.
In case of sched-ext, there are a lot of other helper/kfunc calls that
need to be allow listed for the support to be complete, but a separate
follow up will deal with that.
Unlike static subprogs, global subprogs cannot be allowed yet as the
verifier will not explore their body when encountering a call
instruction for them. Therefore, we would need an alternative approach
(some sort of function summarization to ensure a lock is never taken
from a global subprog and all its callees).
[0]: https://lore.kernel.org/bpf/bd173bf2-dea6-3e0e-4176-4a9256a9a056@google.com
Changelog:
----------
v1 -> v2
v1: https://lore.kernel.org/bpf/20240204120206.796412-1-memxor@gmail.com
* Indicate global function call in verifier error string (Yonghong, David)
* Add Acks from Yonghong, David
====================
Link: https://lore.kernel.org/r/20240204222349.938118-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for static subprog calls within bpf_spin_lock critical
section, and ensure we still reject global subprog calls. Also test the
case where a subprog call will unlock the caller's held lock, or the
caller will unlock a lock taken by a subprog call, ensuring correct
transfer of lock state across frames on exit.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, calling any helpers, kfuncs, or subprogs except the graph
data structure (lists, rbtrees) API kfuncs while holding a bpf_spin_lock
is not allowed. One of the original motivations of this decision was to
force the BPF programmer's hand into keeping the bpf_spin_lock critical
section small, and to ensure the execution time of the program does not
increase due to lock waiting times. In addition to this, some of the
helpers and kfuncs may be unsafe to call while holding a bpf_spin_lock.
However, when it comes to subprog calls, atleast for static subprogs,
the verifier is able to explore their instructions during verification.
Therefore, it is similar in effect to having the same code inlined into
the critical section. Hence, not allowing static subprog calls in the
bpf_spin_lock critical section is mostly an annoyance that needs to be
worked around, without providing any tangible benefit.
Unlike static subprog calls, global subprog calls are not safe to permit
within the critical section, as the verifier does not explore them
during verification, therefore whether the same lock will be taken
again, or unlocked, cannot be ascertained.
Therefore, allow calling static subprogs within a bpf_spin_lock critical
section, and only reject it in case the subprog linkage is global.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: David Vernet <void@manifault.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240204222349.938118-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the driver core can properly handle constant struct bus_type,
move the coreboot_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-firmware-v1-1-d1bff946606d@marliere.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
During recovery, if FAULT_BLOCK is on, it is possible that
f2fs_reserve_new_block() will return -ENOSPC during recovery,
then it may trigger panic.
Also, if fault injection rate is 1 and only FAULT_BLOCK fault
type is on, it may encounter deadloop in loop of block reservation.
Let's change as below to fix these issues:
- remove bug_on() to avoid panic.
- limit the loop count of block reservation to avoid potential
deadloop.
Fixes: 956fa1ddc1 ("f2fs: fix to check return value of f2fs_reserve_new_block()")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now IS_DNODE is used in f2fs_flush_inline_data and it has some problems:
1. Just only inodes may include inline data,not all direct nodes
2. When system IO is busy, it is inefficient to lock a direct node page
but not an inode page. Besides, if this direct node page is being
locked by others for IO, f2fs_flush_inline_data will be blocked here,
which will affects the checkpoint process, this is unreasonable.
So IS_INODE should be used in f2fs_flush_inline_data.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Just remove some redundant codes, no logic change.
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_err_ratelimited() to instead f2fs_err() in
f2fs_record_stop_reason() and f2fs_record_errors() to
avoid redundant logs.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch supports using printk_ratelimited() in f2fs_printk(), and
wrap ratelimited f2fs_printk() into f2fs_{err,warn,info}_ratelimited(),
then, use these new helps to clean up codes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
BUG: kernel NULL pointer dereference, address: 0000000000000014
RIP: 0010:f2fs_submit_page_write+0x6cf/0x780 [f2fs]
Call Trace:
<TASK>
? show_regs+0x6e/0x80
? __die+0x29/0x70
? page_fault_oops+0x154/0x4a0
? prb_read_valid+0x20/0x30
? __irq_work_queue_local+0x39/0xd0
? irq_work_queue+0x36/0x70
? do_user_addr_fault+0x314/0x6c0
? exc_page_fault+0x7d/0x190
? asm_exc_page_fault+0x2b/0x30
? f2fs_submit_page_write+0x6cf/0x780 [f2fs]
? f2fs_submit_page_write+0x736/0x780 [f2fs]
do_write_page+0x50/0x170 [f2fs]
f2fs_outplace_write_data+0x61/0xb0 [f2fs]
f2fs_do_write_data_page+0x3f8/0x660 [f2fs]
f2fs_write_single_data_page+0x5bb/0x7a0 [f2fs]
f2fs_write_cache_pages+0x3da/0xbe0 [f2fs]
...
It is possible that other threads have added this fio to io->bio
and submitted the io->bio before entering f2fs_submit_page_write().
At this point io->bio = NULL.
If is_end_zone_blkaddr(sbi, fio->new_blkaddr) of this fio is true,
then an NULL pointer dereference error occurs at bio_get(io->bio).
The original code for determining zone end was after "out:",
which would have missed some fio who is zone end. I've moved
this code before "skip:" to make sure it's done for each fio.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Signed-off-by: Wenjie Qi <qwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It needs to check last zone_pending_bio and wait IO completion before
traverse next fio in io->io_list, otherwise, bio in next zone may be
submitted before all IO completion in current zone.
Fixes: e067dc3c6b ("f2fs: maintain six open zones for zoned devices")
Cc: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We will encounter below inconsistent status when FAULT_BLKADDR type
fault injection is on.
Info: checkpoint state = d6 : nat_bits crc fsck compacted_summary orphan_inodes sudden-power-off
[ASSERT] (fsck_chk_inode_blk:1254) --> ino: 0x1c100 has i_blocks: 000000c0, but has 191 blocks
[FIX] (fsck_chk_inode_blk:1260) --> [0x1c100] i_blocks=0x000000c0 -> 0xbf
[FIX] (fsck_chk_inode_blk:1269) --> [0x1c100] i_compr_blocks=0x00000026 -> 0x27
[ASSERT] (fsck_chk_inode_blk:1254) --> ino: 0x1cadb has i_blocks: 0000002f, but has 46 blocks
[FIX] (fsck_chk_inode_blk:1260) --> [0x1cadb] i_blocks=0x0000002f -> 0x2e
[FIX] (fsck_chk_inode_blk:1269) --> [0x1cadb] i_compr_blocks=0x00000011 -> 0x12
[ASSERT] (fsck_chk_inode_blk:1254) --> ino: 0x1c62c has i_blocks: 00000002, but has 1 blocks
[FIX] (fsck_chk_inode_blk:1260) --> [0x1c62c] i_blocks=0x00000002 -> 0x1
After we inject fault into f2fs_is_valid_blkaddr() during truncation,
a) it missed to increase @nr_free or @valid_blocks
b) it can cause in blkaddr leak in truncated dnode
Which may cause inconsistent status.
This patch separates FAULT_BLKADDR_CONSISTENCE from FAULT_BLKADDR,
and rename FAULT_BLKADDR to FAULT_BLKADDR_VALIDITY
so that we can:
a) use FAULT_BLKADDR_CONSISTENCE in f2fs_truncate_data_blocks_range()
to simulate inconsistent issue independently, then it can verify fsck
repair flow.
b) FAULT_BLKADDR_VALIDITY fault will not cause any inconsistent status,
we can just use it to check error path handling in kernel side.
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
verify_blkaddr() will trigger panic once we inject fault into
f2fs_is_valid_blkaddr(), fix to remove this unnecessary f2fs_bug_on().
Fixes: 18792e64c8 ("f2fs: support fault injection for f2fs_is_valid_blkaddr()")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In reserve_compress_blocks(), we update blkaddrs of dnode in prior to
inc_valid_block_count(), it may cause inconsistent status bewteen
i_blocks and blkaddrs once inc_valid_block_count() fails.
To fix this issue, it needs to reverse their invoking order.
Fixes: c75488fb4d ("f2fs: introduce F2FS_IOC_RESERVE_COMPRESS_BLOCKS")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Compressed cluster may not be released due to we can fail in
release_compress_blocks(), fix to handle reserved compressed
cluster correctly in reserve_compress_blocks().
Fixes: 4c8ff7095b ("f2fs: support data compression")
Signed-off-by: Sheng Yong <shengyong@oppo.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we overwrite compressed cluster w/ normal cluster, we should
not unlock cp_rwsem during f2fs_write_raw_pages(), otherwise data
will be corrupted if partial blocks were persisted before CP & SPOR,
due to cluster metadata wasn't updated atomically.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If data block in compressed cluster is not persisted with metadata
during checkpoint, after SPOR, the data may be corrupted, let's
guarantee to write compressed page by checkpoint.
Fixes: 4c8ff7095b ("f2fs: support data compression")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
'f2fs_is_checkpoint_ready()' checks free sections. If there is not
enough free sections, most f2fs operations will return -ENOSPC when
checkpoint is disabled.
It would be better to check free sections before disable checkpoint.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[1] changed the below condition, which made f2fs_put_page() voided.
This patch reapplies the AL's resolution in -next from [2].
- if (S_ISDIR(old_inode->i_mode)) {
+ if (old_is_dir && old_dir != new_dir) {
old_dir_entry = f2fs_parent_dir(old_inode, &old_dir_page);
if (!old_dir_entry) {
if (IS_ERR(old_dir_page))
[1] 7deee77b99 ("f2fs: Avoid reading renamed directory if parent does not change")
[2] https://lore.kernel.org/all/20231220013402.GW1674809@ZenIV/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Rather then loop over entities until one with a ready job is found,
re-queue the run job worker when drm_sched_entity_pop_job() returns NULL.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 66dbd9004a ("drm/sched: Drain all entities in DRM sched run job worker")
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240130030413.2031009-1-matthew.brost@intel.com
Now that the driver core can properly handle constant struct bus_type, move
the tcm_loop_lld_bus variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-target-v1-1-96106936c4ab@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type, move
the pseudo_lld_bus variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-scsi-v1-3-6f552fb24f71@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type, move
the iscsi_flashnode_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-scsi-v1-2-6f552fb24f71@marliere.net
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type, move
the fcoe_bus_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240203-bus_cleanup-scsi-v1-1-6f552fb24f71@marliere.net
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.0
This patch set contains fixes identified by static code analyzers,
updates to log messaging, bug fixes related to discovery and
congestion management, and clean up patches regarding the abuse of
shost lock in the driver.
The patches were cut against Martin's 6.9/scsi-queue tree.
Link: https://lore.kernel.org/r/20240131185112.149731-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update copyrights to 2024 for files modified in the 14.4.0.0 patch set.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-18-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In attempt to reduce the amount of unnecessary shost_lock acquisitions in
the lpfc driver, change load_flag into an unsigned long bitmask and use
clear_bit/test_bit bitwise atomic APIs instead of reliance on shost_lock
for synchronization.
Also, correct the test for FC_UNLOADING in lpfc_ct_handle_mibreq, which
incorrectly tests vport->fc_flag rather than vport->load_flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-16-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In attempt to reduce the amount of unnecessary shost_lock acquisitions in
the lpfc driver, change fc_flag into an unsigned long bitmask and use
clear_bit/test_bit bitwise atomic APIs instead of reliance on shost_lock
for synchronization.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-15-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In attempt to reduce the amount of unnecessary shost_lock acquisitions in
the lpfc driver, replace shost_lock with an explicit fc_nodes_list_lock
spinlock when accessing vport->fc_nodes lists. Although vport memory
region is owned by shost->hostdata, it is driver private memory and an
explicit fc_nodes list lock for fc_nodes list mutations is more appropriate
than locking the entire shost.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-14-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There is no reason to use the shost_lock to synchronize an LLDD statistics
counter. Convert all the nlp state statistic counters into atomic_t.
Corresponding zeroing, increments, and reads are converted to atomic
versions.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-13-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Desiring to reduce the amount of unnecessary shost_lock acquisitions in the
lpfc driver, it has been determined that there is no need for shost_lock
protection when retrieving fc_host port information because it is only for
display to user via sysfs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-12-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ACQE notification event to reset congestion statistics should be moved
into the specific lpfc_sli4_async_sli_evt() routine instead of being
processed from the generic lpfc_sli4_async_event_proc() routine.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-11-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FPIN frequency is provided by the fabric in peer congestion notifications.
Currently, the frequency is only logged in a message, but it should also be
saved into the phba's cgn_fpin statistics member for proper application
functionality.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-10-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "Nodelist not empty" log message and an accompanying delay may be
observed when deleting an NPIV port or unloading the lpfc driver. This can
occur due to receipt of an ABTS for which there is no corresponding login
context or ndlp allocated. In such cases, the driver allocates a new ndlp
object to send a BLS_RJT after which the ndlp object unintentionally
remains in the NLP_STE_UNUSED_NODE state forever.
Add a check to conditionally remove ndlp's initial reference count when
queuing a BLS response. If the initial reference is removed, then set
the NLP_DROPPED flag to notify other code paths.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-9-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Requests to delete an NPIV port may fail repeatedly if the initial request
is received during discovery.
If the FC_UNLOADING load_flag is set, then skip CT response processing for
the physical port. This allows discovery processing for other lpfc_vport
objects to reach their cmpl routines before deleting the vport.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-8-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Upon first RSCN receipt of a target server's remote port that is initially
acting as an initiator function, the driver marks the ndlp->nlp_type as an
initiator role. Then later, when processing an RSCN for a target function
role switch, that ndlp remote port is permanently stuck as an initiator
role and can never transition to be discovered as an updated target role
function.
Remove the NLP_RCV_PLOGI early return if statement clause so that the
NLP_NPR_2B_DISC flag gets set. This allows for role change detections.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-7-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>