Remove the early return NLP_FABRIC check in lpfc_plogi_confirm_nport()
because it is possible for switch domain controllers to change WWPN.
As a result, allow lpfc_plogi_confirm_nport() to detect that a new ndlp
should be initialized in such cases. The old ndlp object will be cleaned
up when dev_loss_tmo callbk executes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-6-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
D_ID swaps are common during cable swaps in a SAN. Thus, there's no reason
to log the event at a KERN_ERR level with the trace event logger.
Change the log level to KERN_INFO and the normal LOG_ELS flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-5-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The sg_dma_len() API should be used to retrieve a scatterlist's length
instead of directly accessing scatterlist->length.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-4-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an
unsuccessful status. In such cases, the elsiocb is not issued, the
completion is not called, and thus the elsiocb resource is leaked.
Check return value after calling lpfc_sli4_resume_rpi() and conditionally
release the elsiocb resource.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A static code analyzer tool indicates that the local variable called status
in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage
uninitialized values in the routine's log message.
Fix by initializing to zero.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://lore.kernel.org/r/20240131185112.149731-2-justintee8345@gmail.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The for-6.8-fixes commit ae9cc8956944 ("Revert "workqueue: Override implicit
ordered attribute in workqueue_apply_unbound_cpumask()") also fixes build for
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit ca10d851b9.
The commit allowed workqueue_apply_unbound_cpumask() to clear __WQ_ORDERED
on now removed implicitly ordered workqueues. This was incorrect in that
system-wide config change shouldn't break ordering properties of all
workqueues. The reason why apply_workqueue_attrs() path was allowed to do so
was because it was targeting the specific workqueue - either the workqueue
had WQ_SYSFS set or the workqueue user specifically tried to change
max_active, both of which indicate that the workqueue doesn't need to be
ordered.
The implicitly ordered workqueue promotion was removed by the previous
commit 3bc1e711c2 ("workqueue: Don't implicitly make UNBOUND workqueues w/
@max_active==1 ordered"). However, it didn't update this path and broke
build. Let's revert the commit which was incorrect in the first place which
also fixes build.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3bc1e711c2 ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered")
Fixes: ca10d851b9 ("workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
The calculation to determine max page size of a VMA during a REMAP
operations assumes the VMA has been bound. This assumption is not true
if the VMA is from an eariler operation in an array of binds. If a VMA
has not been bound use the maximum page size which will ensure the
previous / next REMAP operations are not incorrectly skipped.
Fixes: 8f33b4f054 ("drm/xe: Avoid doing rebinds")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205231714.2956225-1-matthew.brost@intel.com
In the case of XDP Multi-Buffer with Striding RQ, an extra
page is allocated for the linear part of non-linear SKBs.
Including headroom and tailroom in the calculation may
result in an unnecessary increase in the amount of memory
allocated. This could be critical, particularly for large
MTUs (e.g. 7975B) and large RQ sizes (e.g. 8192).
In this case, the requested page pool size is 64K, but
32K would be sufficient. This causes a failure due to
exceeding the page pool size limit of 32K.
Exclude headroom and tailroom from SKB size calculations
to reduce page pool size.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Packet data buffers lack reserved headroom or tailroom,
and SKBs are allocated on a side memory when needed.
Exclude the tailroom from the SKB size calculations.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In current SWS debug dump mechanism we implement the seq_file interface,
but we only implement the 'show' callback to dump the whole steering DB
with a single call to this callback.
However, for large data size the seq_printf function will fail to
allocate a buffer with the adequate capacity to hold such data.
This patch solves this problem by utilizing the seq_file interface
mechanism in the following way:
- when the user triggers a dump procedure, we will allocate a list of
buffers that hold the whole data dump (in the start callback)
- using the start, next, show and stop callbacks of the seq_file
API we iterate through the list and dump the whole data
Signed-off-by: Hamdan Igbaria <hamdani@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Lack of SyncE capability should not emit a warning, change the print to
debug level.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Device definitions belong in mlx5_ifc, remove the duplicates in
mlx5_core.h.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The function wait_fw_init() returns same error code either if it breaks
waiting due to timeout or other reason. Thus, the function callers print
error message on timeout without checking error type.
Return different error code for different failure reason and print error
message accordingly on wait_fw_init().
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When PF/VF teardown is called the driver sets the flag
MLX5_BREAK_FW_WAIT to stop waiting for FW loading and initializing. Same
should be applied to SF driver teardown to cut waiting time. On
mlx5_sf_dev_remove() set the flag before draining health WQ as recovery
flow may also wait for FW reloading while it is not relevant anymore.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case function is not a Physical Function it is not allowed to get FW
core dump, so if tried it will fail the fw health reporter dump option.
Instead of failing, remove the option of fw_fatal health reporter dump
for such function.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case function is not a Physical Function it is not allowed to collect
crdump, so if tried it will fail the fw_fatal health reporter dump
option. Instead of failing on permission, remove the option of fw_fatal
health reporter dump for such function.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mlx5 has two functions with the same name mlx5_sf_dev_remove. Both are
static, in different files, so no compilation or logical issue, but it
makes it hard to follow the code and some traces even can get both as
one leads to the other [1]. Rename one to mlx5_sf_dev_remove_aux() as it
actually removes the auxiliary device of the SF.
[1]
mlx5_sf_dev_remove+0x2a/0x70 [mlx5_core]
auxiliary_bus_remove+0x18/0x30
device_release_driver_internal+0x199/0x200
bus_remove_device+0xd7/0x140
device_del+0x153/0x3d0
? process_one_work+0x16a/0x4b0
mlx5_sf_dev_remove+0x2e/0x90 [mlx5_core]
mlx5_sf_dev_table_destroy+0xa0/0x100 [mlx5_core]
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fix counter name in documentation of mlx5 vnic health reporter diagnose
output: total_error_queues.
While here fix alignment in the documentation file of another counter,
comp_eq_overrun, as it should have its own line and not be part of
another counter's description.
Example:
$ devlink health diagnose pci/0000:00:04.0 reporter vnic
vNIC env counters:
total_error_queues: 0 send_queue_priority_update_flow: 0
comp_eq_overrun: 0 async_eq_overrun: 0 cq_overrun: 0
invalid_command: 0 quota_exceeded_command: 0
nic_receive_steering_discard: 0
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After addition of HW managed counters and implementation drop
in flow steering logic, the code in driver which checks syndrome
is not reachable anymore.
Let's delete it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Fill integrity, replay and bad trailer counters.
As an example, after simulating replay window attack with 5 packets:
[leonro@c ~]$ grep XfrmInStateSeqError /proc/net/xfrm_stat
XfrmInStateSeqError 5
[leonro@c ~]$ sudo ip -s x s
<...>
stats:
replay-window 0 replay 5 failed 0
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Iterate over all SAs in order to fill global IPsec statistics.
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In order to allow drivers to fill all statistics, change the name
of xdo_dev_state_update_curlft to be xdo_dev_state_update_stats.
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add Matthew Brost to DRM scheduler maintainers.
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240131030302.2088173-1-matthew.brost@intel.com
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
5c0338c687 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered")
automoatically promoted UNBOUND workqueues w/ @max_active==1 to ordered
workqueues because UNBOUND workqueues w/ @max_active==1 used to be the way
to create ordered workqueues and the new NUMA support broke it. These
problems can be subtle and the fact that they can only trigger on NUMA
machines made them even more difficult to debug.
However, overloading the UNBOUND allocation interface this way creates other
issues. It's difficult to tell whether a given workqueue actually needs to
be ordered and users that legitimately want a min concurrency level wq
unexpectedly gets an ordered one instead. With planned UNBOUND workqueue
udpates to improve execution locality and more prevalence of chiplet designs
which can benefit from such improvements, this isn't a state we wanna be in
forever.
There aren't that many UNBOUND w/ @max_active==1 users in the tree and the
preceding patches audited all and converted them to
alloc_ordered_workqueue() as appropriate. This patch removes the implicit
promotion of UNBOUND w/ @max_active==1 workqueues to ordered ones.
v2: v1 patch incorrectly dropped !list_empty(&wq->pwqs) condition in
apply_workqueue_attrs_locked() which spuriously triggers WARNING and
fails workqueue creation. Fix it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202304251050.45a5df1f-oliver.sang@intel.com
The ioctl()s to get and set KVM's debug registers are broken for 32 bit
kernels as they'd only copy half of the user register state because of a
UAPI and in-kernel type mismatch (__u64 vs. unsigned long; 8 vs. 4
bytes).
This makes it impossible for userland to set anything but DR0 without
resorting to bit folding tricks.
Switch to a loop for copying debug registers that'll implicitly do the
type conversion for us, if needed.
There are likely no users (left) for 32bit KVM, fix the bug nonetheless.
Fixes: a1efbe77c1 ("KVM: x86: Add support for saving&restoring debug registers")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240203124522.592778-4-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Given that 849d18e27b ("md: Remove deprecated CONFIG_MD_LINEAR")
killed the linear flavour of MD, it seems only logical to drop
the leftover include file that used to come with it.
I also feel that it should be my own privilege to remove my 30 year
old attempt at writing kernel code ;-). RIP!
Cc: Song Liu <song@kernel.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201224549.750644-1-maz@kernel.org
Since md_start_sync() will be called without the protect of mddev_lock,
and it can run concurrently with array reconfiguration, traversal of rdev
in it should be protected by RCU lock.
Commit bc08041b32 ("md: suspend array in md_start_sync() if array need
reconfiguration") added md_spares_need_change() to md_start_sync(),
casusing use of rdev without any protection.
Fix this by adding RCU lock in md_spares_need_change().
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240104133629.1277517-1-lilingfeng@huaweicloud.com
Users may get rdev->mddev by sysfs while rdev is releasing.
So use both READ_ONCE() and WRITE_ONCE() to prevent load/store tearing
and to read/write mddev atomically.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231229070500.3602712-1-lilingfeng@huaweicloud.com
On the one hand, mddev_unlock() will call md_wakeup_thread()
unconditionally; on the other hand, md_check_recovery() can't make
progress if 'reconfig_mutex' can't be grabbed. Hence, it really doesn't
make sense to wake up daemon thread while 'reconfig_mutex' is still
grabbed.
Remove all the md_wakup_thread() for 'mddev->thread' while
'reconfig_mtuex' is still grabbed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231228125553.2697765-3-yukuai1@huaweicloud.com
The lifetime of sync_thread:
1) Set MD_RECOVERY_NEEDED and wake up daemon thread (by ioctl/sysfs or
other events);
2) Daemon thread woke up, md_check_recovery() found that
MD_RECOVERY_NEEDED is set:
a) try to grab reconfig_mutex;
b) set MD_RECOVERY_RUNNING;
c) clear MD_RECOVERY_NEEDED, and then queue sync_work;
3) md_start_sync() choose sync_action, then register sync_thread;
4) md_do_sync() is done, set MD_RECOVERY_DONE and wake up daemon thread;
5) Daemon thread woke up, md_check_recovery() found that
MD_RECOVERY_DONE is set:
a) try to grab reconfig_mutex;
b) unregister sync_thread;
c) clear MD_RECOVERY_RUNNING and MD_RECOVERY_DONE;
Hence there is no such case that MD_RECOVERY_RUNNING is not set, while
sync_thread is registered.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231228125553.2697765-2-yukuai1@huaweicloud.com
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts usb hcd from tasklet to BH workqueue.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: linux-usb@vger.kernel.org
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
This patch converts backtracetest from tasklet to BH workqueue.
- Replace "irq" with "bh" in names and message to better reflect what's
happening.
- Replace completion usage with a flush_work() call.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
This patch attempts to update the ISA specification according
to the latest mailing list discussion about conformance groups,
in a way that is intended to be consistent with IANA registry
processes and IETF 118 WG meeting discussion.
It does the following:
* Split basic into base32 and base64 for 32-bit vs 64-bit base
instructions
* Split division/multiplication/modulo instructions out of base groups
* Split atomic instructions out of base groups
There may be additional changes as discussion continues,
but there seems to be consensus on the principles above.
v1->v2: fixed typo pointed out by David Vernet
v2->v3: Moved multiplication to same groups as division/modulo
Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20240202221110.3872-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If ufshcd_err_handler() is called in a suspend/resume situation,
ufs_release() can be called twice and active_reqs end up going negative.
This is because ufshcd_err_handling_prepare() and
ufshcd_err_handling_unprepare() both call ufshcd_release().
Remove superfluous call to ufshcd_release().
Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com>
Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LUNs going into "failed ready running" state observed on >1T and on even
numbers of size (2T, 4T, 6T, 8T and 10T). The issue occurs when DIF is
enabled at the host.
The kernel logs:
Cannot setup S/G List for HBAIO segs 1/1 SGL 512 SCSI 256: 3 0
The host lpfc driver is failing to setup scatter/gather list (protection
data) for the I/Os.
The return type lpfc_bg_setup_sgl()/lpfc_bg_setup_sgl_prot() causes the
compiler to remove the most significant bit. Use an unsigned type instead.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: added commit message]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Link: https://lore.kernel.org/r/20231220162658.12392-1-dwagner@suse.de
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 4373534a98 ("scsi: core: Move scsi_host_busy() out of host lock
for waking up EH handler") intended to fix a hard lockup issue triggered by
EH. The core idea was to move scsi_host_busy() out of the host lock when
processing individual commands for EH. However, a suggested style change
inadvertently caused scsi_host_busy() to remain under the host lock. Fix
this by calling scsi_host_busy() outside the lock.
Fixes: 4373534a98 ("scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler")
Cc: Sathya Prakash Veerichetty <safhya.prakash@broadcom.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240203024521.2006455-1-ming.lei@redhat.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Now that the driver core can properly handle constant struct bus_type,
move the rpmsg_bus variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-rpmsg-v1-1-1703508c23b7@marliere.net
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use device lifecycle managed devm_rproc_add() helper function. This helps
prevent mistakes like deleting out of order in cleanup functions and
forgetting to delete on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-6-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed ioremap helper function. This helps prevent
mistakes like unmapping out of order in cleanup functions and forgetting
to unmap on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-5-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use a device lifecycle managed action to release tps ti_sci_proc handle.
This helps prevent mistakes like releasing out of order in cleanup
functions and forgetting to release on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-4-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use device lifecycle managed devm_kzalloc() helper function. This helps
prevent mistakes like freeing out of order in cleanup functions and
forgetting to free on all error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-3-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use the device lifecycle managed TI-SCI get() function. This helps prevent
mistakes like not put()'ing in the wrong order in cleanup functions and
forgetting to put() on error paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240205182753.36978-2-afd@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Commit 6abe9c1386 ("KVM: X86: Move ignore_msrs handling upper the
stack") changed the 'ignore_msrs' handling, including sanitizing return
values to the caller. This was fine until commit 12bc2132b1 ("KVM:
X86: Do the same ignore_msrs check for feature msrs") which allowed
non-existing feature MSRs to be ignored, i.e. to not generate an error
on the ioctl() level. It even tried to preserve the sanitization of the
return value. However, the logic is flawed, as '*data' will be
overwritten again with the uninitialized stack value of msr.data.
Fix this by simplifying the logic and always initializing msr.data,
vanishing the need for an additional error exit path.
Fixes: 12bc2132b1 ("KVM: X86: Do the same ignore_msrs check for feature msrs")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240203124522.592778-2-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
Recently, when running './test_progs -j', I occasionally hit the
following errors:
test_lwt_redirect:PASS:pthread_create 0 nsec
test_lwt_redirect_run:FAIL:netns_create unexpected error: 256 (errno 0)
#142/2 lwt_redirect/lwt_redirect_normal_nomac:FAIL
#142 lwt_redirect:FAIL
test_lwt_reroute:PASS:pthread_create 0 nsec
test_lwt_reroute_run:FAIL:netns_create unexpected error: 256 (errno 0)
test_lwt_reroute:PASS:pthread_join 0 nsec
#143/2 lwt_reroute/lwt_reroute_qdisc_dropped:FAIL
#143 lwt_reroute:FAIL
The netns_create() definition looks like below:
#define NETNS "ns_lwt"
static inline int netns_create(void)
{
return system("ip netns add " NETNS);
}
One possibility is that both lwt_redirect and lwt_reroute create
netns with the same name "ns_lwt" which may cause conflict. I tried
the following example:
$ sudo ip netns add abc
$ echo $?
0
$ sudo ip netns add abc
Cannot create namespace file "/var/run/netns/abc": File exists
$ echo $?
1
$
The return code for above netns_create() is 256. The internet search
suggests that the return value for 'ip netns add ns_lwt' is 1, which
matches the above 'sudo ip netns add abc' example.
This patch tried to use different netns names for two tests to avoid
'ip netns add <name>' failure.
I ran './test_progs -j' 10 times and all succeeded with
lwt_redirect/lwt_reroute tests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20240205052914.1742687-1-yonghong.song@linux.dev
The servers for the @codeaurora domain are long retired and any messages
sent there bounce. Sandeep Panda's email address is no longer valid and
should be repleaced. However Sandeep has left the company and has not
been active sice, therefore it looks like this binding is orphaned.
Doug is listed as the reviewer for this file in MAINTAINERS and has
volunteered to be listed within the file as the binding maintainer.
Therefore replace Sandeep with Doug to make the documentation current.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202202329.4172917-1-quic_jhugo@quicinc.com
Somehow recently I frequently hit the following test failure
with either ./test_progs or ./test_progs-cpuv4:
serial_test_ptr_untrusted:PASS:skel_open 0 nsec
serial_test_ptr_untrusted:PASS:lsm_attach 0 nsec
serial_test_ptr_untrusted:PASS:raw_tp_attach 0 nsec
serial_test_ptr_untrusted:FAIL:cmp_tp_name unexpected cmp_tp_name: actual -115 != expected 0
#182 ptr_untrusted:FAIL
Further investigation found the failure is due to
bpf_probe_read_user_str()
where reading user-level string attr->raw_tracepoint.name
is not successfully, most likely due to the
string itself still in disk and not populated into memory yet.
One solution is do a printf() call of the string before doing bpf
syscall which will force the raw_tracepoint.name into memory.
But I think a more robust solution is to use bpf_copy_from_user()
which is used in sleepable program and can tolerate page fault,
and the fix here used the latter approach.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240204194452.2785936-1-yonghong.song@linux.dev