[ Upstream commit fa4d57b857 ]
Without MODULE_DEVICE_TABLE, crypto_safexcel.ko module is not automatically
loaded on platforms where inside-secure crypto HW is specified in device
tree (e.g. Armada 3720). So add missing MODULE_DEVICE_TABLE for of.
Fixes: 1b44c5a60c ("crypto: inside-secure - add SafeXcel EIP197 crypto engine driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dfa9343f ]
The hpre encryption driver may be used to encrypt and decrypt packets
during the rx softirq, it is not allowed to use GFP_KERNEL.
Fixes: c8b4b47707 ("crypto: hisilicon - add HiSilicon HPRE accelerator")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42b4f7f66a ]
Currently, driver is setting default values to all timeouts during
function setup. The offending commit is using a timeout before
function setup, meaning: the timeout is 0 (or garbage), since no
value have been set.
This may result in failure to probe the driver:
mlx5_function_setup:1034:(pid 69850): Firmware over 4294967296 MS in pre-initializing state, aborting
probe_one:1591:(pid 69850): mlx5_init_one failed with error code -16
Hence, set default values to timeouts during tout_init()
Fixes: 37ca95e62e ("net/mlx5: Increase FW pre-init timeout for health recovery")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62d2664351 ]
Fix several issues in SMFS steering info dump:
- Fix outdated macro value for matcher mask in the SMFS debug dump format.
The existing value denotes the old format of the matcher mask, as it was
used during the early stages of development, and it results in wrong
parsing by the steering dump parser - wrong fields are shown in the
parsed output.
- Add the missing destination table to the dumped action.
The missing dest table handle breaks the ability to associate between
the "go to table" action and the actual table in the steering info.
Fixes: 9222f0b27d ("net/mlx5: DR, Add support for dumping steering info")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6e9085d79 ]
The cited commit limited log_max_qp to be 17 due to FW capabilities.
Recently, it turned out that there are old FW versions that supported
more than 17, so the cited commit caused a degradation.
Thus, set the maximum log_max_qp back to 18 as it was before the
cited commit.
Fixes: 7f839965b2 ("net/mlx5: Update log_max_qp value to be 17 at most")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0063a4370 ]
While extending available range of supported chains/prios referenced commit
also modified slow path rules to go to FT chain instead of actual slow FDB.
However neither of existing users of the MLX5_ATTR_FLAG_SLOW_PATH
flag (tunnel encap entries with invalid encap and flows with trap action)
need to match on FT chain. After bridge offload was implemented packets of
such flows can also be matched by bridge priority tables which is
undesirable. Restore slow path flows implementation to redirect packets to
slow_fdb.
Fixes: 278d51f243 ("net/mlx5: E-Switch, Increase number of chains and priorities")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 677e78c8d4 ]
Before commit 76c31e5f75 ("net/mlx5e: Use FW limitation for max MPW
WQEBBs"), the maximum size of MPWQE in WQEBBs was hardcoded as a driver
constant. That commit started using the firmware capability that can
further limit the size, however, it unintentionally changed a few
things:
1. The calculation of MLX5E_MAX_KLM_PER_WQE used the size in DS, which
was replaced by the size in WQEBBs, making the resulting value 4 times
smaller.
2. MLX5E_TX_MPW_MAX_WQEBBS used to be aligned to the cache line size
(either 64 or 128 bytes, i.e. 1 or 2 WQEBBs), but it's no longer the
case if the firmware capability is smaller than the driver maximum.
Fix both issues by using the correct units for MLX5E_MAX_KLM_PER_WQE and
by aligning mlx5e_get_sw_max_sq_mpw_wqebbs after taking the minimum.
Besides fixing the arithmetics in calculation of MLX5E_MAX_KLM_PER_WQE,
also use appropriate constants: `size of BSF * num of DS per WQEBB *
number of WQEBBs` (the calculation before the blamed commit) doesn't
make much sense to calculate the WQE size in bytes, so just use `size of
WQEBB * number of WQEBBs`.
While at it, replace the types that hold the number of WQEBBs by u8.
These values don't exceed 16, and it allows to fill holes in two
structs.
Fixes: 76c31e5f75 ("net/mlx5e: Use FW limitation for max MPW WQEBBs")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52586d2f56 ]
ICOSQ is used to post UMR WQEs for both regular RQ and XSK RQ. However,
space in ICOSQ is reserved only for the regular RQ, which may cause
ICOSQ overflows when using XSK (the most risk is on activating
channels).
This commit fixes the issue by reserving space for XSK UMR WQEs as well.
As XSK may be enabled without restarting the channel and recreating the
ICOSQ, this space is reserved unconditionally.
Fixes: db05815b36 ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 562696c3c6 ]
MLX5E_MAX_RQ_NUM_MTTS should be the maximum value, so that
MLX5_MTT_OCTW(MLX5E_MAX_RQ_NUM_MTTS) fits into u16. The current value of
1 << 17 results in MLX5_MTT_OCTW(1 << 17) = 1 << 16, which doesn't fit
into u16. This commit replaces it with the maximum value that still
fits u16.
Fixes: 73281b78a3 ("net/mlx5e: Derive Striding RQ size from MTU")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 903f2194f7 ]
The cited commit changed CT to use multi table actions post act infrastructure instead
of using it own post act infrastructure, this broke decap during VF tunnel offload
(Stack devices) with CT due to wrong match on in_port metadata in the post act table.
This changed only broke VF tunnel offload because it modify the packet in_port metadata
to be VF metadata and it isn't propagate the post act creation.
Fixed by modify post act rules to match only on fte_id and not match on in_port metadata
which isn't needed.
Fixes: a81283263b ("net/mlx5e: Use multi table support for CT and sample actions")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 115d9f95ea ]
The driver reports whether TX/RX TLS device offloads are supported, but
not which ciphers/versions, these should be handled by returning
-EOPNOTSUPP when .tls_dev_add() is called.
Remove the WARN_ON kernel trace when the driver gets a request to
offload a cipher/version that is not supported as it is expected.
Fixes: d2ead1f360 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06ac561fb0 ]
The "ret" variable needs to be signed for the error handling to work.
Fixes: 2ca97adccd ("drm/amd/display: Add Synaptics Fifo Reset Workaround")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df9ec2fc8e ]
Currently, the driver tries to validat the HEVC SPS
against the CAPTURE queue format (i.e. the decoded format).
This is not correct, because typically the SPS control is set
before the CAPTURE queue is negotiated.
Fixes: 135ad96cb4 ("media: hantro: Be more accurate on pixel formats step_width constraints")
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 143201a643 ]
Not all DPB entries will be used most of the time. Unused entries will
thus have invalid timestamps. They will produce negative buffer index
which is not specifically handled. This works just by chance in current
code. It will even produce bogus pointer, but since it's not used, it
won't do any harm.
Let's fix that brittle design by skipping writing DPB entry altogether
if timestamp is invalid.
Fixes: 86caab29da ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d578e0af3a ]
Commit 7a4836560a changes simple_write_to_buffer() with memdup_user()
but it forgets to change the value to be returned that came from
simple_write_to_buffer() call. It results in the following warning:
warning: variable 'rc' is uninitialized when used here [-Wuninitialized]
return rc;
^~
Remove rc variable and just return the passed in length if the
memdup_user() succeeds.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7a4836560a ("wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()")
Fixes: ff974e4083 ("wil6210: debugfs interface to send raw WMI command")
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220724202452.61846-1-ammar.faizi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 867f4eeee8 ]
Commit 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
regressed QCN9074. With the above mentioned commit, writes are failing
for some registers on QCN9074 although the device seems to work
normally.
ath11k_pci 0000:03:00.0: failed to set pcie link register0x01e0e0a8: 0xffffffff != 0x00000010
ath11k_pci 0000:03:00.0: failed to set sysclk: -110
PCIe devices in ath11k (QCA6390, WCN6855, QCN9074, WCN6750) use window
concept for register accesses. There are two schemes, dynamic & static
window.
In dynamic window scheme, a single window(region in the BAR) is mapped
either to CE or DP register windows at any give time. QCA6390 & WCN6855
follow this scheme for register accesses.
In static window scheme, CE & DP register windows are statically mapped
to separate regions with in the BAR so that there is no switching of
register windows between CE & DP register accesses. QCN9074 & WCN6750
follow this scheme although the window start offsets are different for
QCN9074 & WCN6750.
QCN9074 uses 3rd & 2nd window for DP & CE register accesses respectively
whereas WCN6750 uses 1st & 2nd window for DP & CE. In QCN9074, along with
2nd & 3rd windows, 1st window is also used for certain configurations
which commit 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
did not account for and hence the regression.
Fix this by going back to the original way of accessing the registers on
QCN9074. Since this diverges from WCN6750 way of accessing registers, it
is required to register window_read32/window_write32() pci_ops for WCN6750.
We can also get rid of dp_window_idx & ce_window_idx members in hw_params,
so remove them.
Also add a new API ath11k_pcic_register_pci_ops() for registering pci_ops
to the ath11k core. This API checks for mandatory pci_ops() and reports
error if those are missing. Also initialize unused pci_ops to NULL.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Fixes: 56c8ccf331 ("ath11k: Add register access logic for WCN6750")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220608062954.27792-1-quic_mpubbise@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6435319c34 ]
In i2c_mux_probe(), we should call of_node_put() when breaking out
of for_each_child_of_node() which will automatically increase and
decrease the refcount.
Fixes: ac8498f0ce ("i2c: i2c-mux-gpmux: new driver")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbd52178e2 ]
For the case where offset + len == size, bpf_xdp_pointer should return a
valid pointer to the addr because that access is permitted. We should
only return NULL in the case where offset + len exceeds size.
Fixes: 3f364222d0 ("net: xdp: introduce bpf_xdp_pointer utility routine")
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/bpf/20220722220105.2065466-1-joannelkoong@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8fff74852 ]
Commit 26101f5ab6 ("bpf: Add source ip in "struct bpf_tunnel_key"")
added support for getting and setting the outer source IP of encapsulated
packets via the bpf_skb_{get,set}_tunnel_key BPF helper. This change
allows BPF programs to set any IP address as the source, including for
example the IP address of a container running on the same host.
In that last case, however, the encapsulated packets are dropped when
looking up the route because the source IP address isn't assigned to any
interface on the host. To avoid this, we need to set the
FLOWI_FLAG_ANYSRC flag.
Fixes: 26101f5ab6 ("bpf: Add source ip in "struct bpf_tunnel_key"")
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/76873d384e21288abe5767551a0799ac93ec07fb.1658759380.git.paul@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 451ef36bd2 ]
This commit extends the ip_tunnel_key struct with a new field for the
flow flags, to pass them to the route lookups. This new field will be
populated and used in subsequent commits.
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/f8bfd4983bd06685a59b1e3ba76ca27496f51ef3.1658759380.git.paul@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d10046613 ]
[BUG]
With added debugging, it turns out the following write sequence would
cause extra read which is unnecessary:
# xfs_io -f -s -c "pwrite -b 32k 0 32k" -c "pwrite -b 32k 32k 32k" \
-c "pwrite -b 32k 64k 32k" -c "pwrite -b 32k 96k 32k" \
$mnt/file
The debug message looks like this (btrfs header skipped):
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=0 physical=323026944 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=32768 physical=22052864 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=0 physical=22020096 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=0 physical=277872640 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
^^^^
Still partial read, even 389152768 is already cached by the first.
write.
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=0 physical=22020096 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
^^^^
Still partial read for 298844160.
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=32768 physical=22052864 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=32768 physical=277905408 len=32768
This means every 32K writes, even they are in the same full stripe,
still trigger read for previously cached data.
This would cause extra RAID56 IO, making the btrfs raid56 cache useless.
[CAUSE]
Commit d4e28d9b5f ("btrfs: raid56: make steal_rbio() subpage
compatible") tries to make steal_rbio() subpage compatible, but during
that conversion, there is one thing missing.
We no longer rely on PageUptodate(rbio->stripe_pages[i]), but
rbio->stripe_nsectors[i].uptodate to determine if a sector is uptodate.
This means, previously if we switch the pointer, everything is done,
as the PageUptodate flag is still bound to that page.
But now we have to manually mark the involved sectors uptodate, or later
raid56_rmw_stripe() will find the stolen sector is not uptodate, and
assemble the read bio for it, wasting IO.
[FIX]
We can easily fix the bug, by also update the
rbio->stripe_sectors[].uptodate in steal_rbio().
With this fixed, now the same write pattern no longer leads to the same
unnecessary read:
partial rmw, full stripe=389152768 opf=0x0 devid=3 type=1 offset=32768 physical=323059712 len=32768
partial rmw, full stripe=389152768 opf=0x0 devid=1 type=2 offset=0 physical=67174400 len=65536
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=0 physical=323026944 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=0 physical=323026944 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=1 type=1 offset=32768 physical=22052864 len=32768
partial rmw, full stripe=298844160 opf=0x0 devid=2 type=2 offset=0 physical=277872640 len=65536
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=0 physical=22020096 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=0 physical=277872640 len=32768
^^^ No more partial read, directly into the write path.
full stripe rmw, full stripe=389152768 opf=0x1 devid=3 type=1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=389152768 opf=0x1 devid=2 type=-1 offset=32768 physical=323059712 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=1 type=1 offset=32768 physical=22052864 len=32768
full stripe rmw, full stripe=298844160 opf=0x1 devid=3 type=-1 offset=32768 physical=277905408 len=32768
Fixes: d4e28d9b5f ("btrfs: raid56: make steal_rbio() subpage compatible")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3f0ceb7c2 ]
The introduction of GPI support moved things around and instead of
returning the result from geni_i2c_xfer() the number of messages in the
request was returned, ignoring the actual result. Fix this.
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fdf6d97f0 ]
SMBus packet error checking (PEC) is implemented by appending one
additional byte of checksum data at the end of the message. This provides
additional protection and allows to detect data corruption on the I2C bus.
SMBus block reads support variable length reads. The first byte in the read
message is the number of available data bytes.
The combination of PEC and block read is currently not supported by the
Cadence I2C driver.
* When PEC is enabled the maximum transfer length for block reads
increases from 33 to 34 bytes.
* The I2C core smbus emulation layer relies on the driver updating the
`i2c_msg` `len` field with the number of received bytes. The updated
length is used when checking the PEC.
Add support to the Cadence I2C driver for handling SMBus block reads with
PEC. To determine the maximum transfer length uses the initial `len` value
of the `i2c_msg`. When PEC is enabled this will be 2, when it is disabled
it will be 1.
Once a read transfer is done also increment the `len` field by the amount
of received data bytes.
This change has been tested with a UCM90320 PMBus power monitor, which
requires block reads to access certain data fields, but also has PEC
enabled by default.
Fixes: df8eb5691c ("i2c: Add driver for Cadence I2C controller")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Shubhrajyoti Datta <Shubhrajyoti.datta@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee5395ced ]
Bluetooth HCI devices indicate if they are able to wakeup in the wakeup
callback since 'commit 4539ca67fe ("Bluetooth: Rename driver
.prevent_wake to .wakeup")'. This patch adds a default wakeup callback
for Bluetooth HCI UAR devices. It assumes Bluetooth HCI UART devices are
wakeable for backward compatibility. For those who need a customized
behavior, one can override it before calling hci_uart_register_device().
Fixes: 4539ca67fe ("Bluetooth: Rename driver .prevent_wake to .wakeup")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0900b1c62f ]
When programming a new entry into the resolving list it shall default
to network mode since the params may contain the mode programmed when
the device was last added to the resolving list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209745
Fixes: 853b70b506 ("Bluetooth: hci_sync: Set Privacy Mode when updating the resolving list")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68253f3cd7 ]
After resuming, remove setting scanning_paused to false, because it is
checked and set to false in hci_resume_scan_sync. Also move setting
the value to false before updating passive scan, because the value is
used when resuming passive scan.
Fixes: 3b42055388 (Bluetooth: hci_sync: Fix attempting to suspend with
unfiltered passive scan)
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7b2fdfb53 ]
Set the connection data before calling get_conn_info_sync, so it can be
verified the connection is still connected, before refreshing cached
values.
Fixes: 47db6b4299 ("Bluetooth: hci_sync: Convert MGMT_OP_GET_CONN_INFO")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab2d2a982f ]
As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.
Fixes: 1ab1f239bf ("Bluetooth: hci_intel: Add support for platform driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9950f11211 ]
After commit 3a5c7e4611, the variable errc is accessed before being
initialized, c.f. below W=2 warning:
| In function 'pch_can_error',
| inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4:
| drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized]
| 501 | cf->data[6] = errc & PCH_TEC;
| | ^
| drivers/net/can/pch_can.c: In function 'pch_can_poll':
| drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here
| 484 | u32 errc, lec;
| | ^~~~
Moving errc initialization up solves this issue.
Fixes: 3a5c7e4611 ("can: pch_can: do not report txerr and rxerr during bus-off")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14229b8153 ]
The return from strcmp() is inverted so it wrongly returns true instead
of false and vice versa.
Fixes: a1c9d61b19 ("libbpf: Improve library identification for uprobe binary path resolution")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/YtZ+/dAA195d99ak@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e70a3263a7 ]
Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.
As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.
This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.
Fixes: 0d66548a10 ("[CAN]: Add PF_CAN core module")
Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aebe8a2433 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0024d8ad16 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a57732084e ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 7259124eac ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 936e905953 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: aec5fb2268 ("can: kvaser_usb: Add support for Kvaser USB hydra family")
Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr
CC: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ac15a8f66 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0738eff14d ("can: Allwinner A10/A20 CAN Controller support - Kernel module")
Link: https://lore.kernel.org/all/20220719143550.3681-7-mailhol.vincent@wanadoo.fr
CC: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a22bd630cf ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-6-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 164d7cb2d5 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 215db1856e ("can: sja1000: Consolidate and unify state change handling")
Link: https://lore.kernel.org/all/20220719143550.3681-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a37b7245e8 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: fd1159318e ("can: add Renesas R-Car CAN driver")
Link: https://lore.kernel.org/all/20220719143550.3681-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5c7e4611 ]
During bus off, the error count is greater than 255 and can not fit in
a u8.
Fixes: 0c78ab76a0 ("pch_can: Add setting TEC/REC statistics processing")
Link: https://lore.kernel.org/all/20220719143550.3681-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b77ffb30cf ]
The snprintf() function returns the number of bytes it *would* have
copied if there were enough space. So it can return > the
sizeof(gen->attach_target).
Fixes: 6723474373 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+oAySqIhFl6/J@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5d22f4cfe ]
The snprintf() function returns the number of bytes which *would*
have been copied if there were space. In other words, it can be
> sizeof(pin_path).
Fixes: c0fa1b6c3e ("bpf: btf: Add BTF tests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/YtZ+aD/tZMkgOUw+@kili
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 597fbc4682 ]
Make libbpf adjust RINGBUF map size (rounding it up to closest power-of-2
of page_size) more eagerly: during open phase when initializing the map
and on explicit calls to bpf_map__set_max_entries().
Such approach allows user to check actual size of BPF ringbuf even
before it's created in the kernel, but also it prevents various edge
case scenarios where BPF ringbuf size can get out of sync with what it
would be in kernel. One of them (reported in [0]) is during an attempt
to pin/reuse BPF ringbuf.
Move adjust_ringbuf_sz() helper closer to its first actual use. The
implementation of the helper is unchanged.
Also make detection of whether bpf_object is already loaded more robust
by checking obj->loaded explicitly, given that map->fd can be < 0 even
if bpf_object is already loaded due to ability to disable map creation
with bpf_map__set_autocreate(map, false).
[0] Closes: https://github.com/libbpf/libbpf/pull/530
Fixes: 0087a681fa ("libbpf: Automatically fix up BPF_MAP_TYPE_RINGBUF size, if necessary")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20220715230952.2219271-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87ac0d6009 ]
If BPF array map is bigger than 4GB, element pointer calculation can
overflow because both index and elem_size are u32. Fix this everywhere
by forcing 64-bit multiplication. Extract this formula into separate
small helper and use it consistently in various places.
Speculative-preventing formula utilizing index_mask trick is left as is,
but explicit u64 casts are added in both places.
Fixes: c85d69135a ("bpf: move memory size checks to bpf_map_charge_init()")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220715053146.1291891-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 958afce98c ]
Save the original stable pstate on ctx init and restore
it on ctx fini so that we restore a manually selected
stable pstate on ctx exit.
v2: fix init order (Alex)
v3: don't add new variable to ctx struct (Evan)
Fixes: c65b364c52 ("drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98a90f1f0f ]
Align RDNA2.x with other asics. One HDP bit per SDMA instance,
aligned with firmware. This is effectively a revert of
commit 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: 369b7d04ba ("drm/amdgpu/nbio2.3: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912db6a587 ]
Align aldebaran with all other asics. One HDP bit per
SDMA instance, aligned with firmware. This is effectively
a revert of
commit a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12").
On further discussions with the relevant hardware teams,
re-align the bits for SDMA.
Fixes: a0f9f85466 ("drm/amdgpu/nbio7.4: don't use GPU_HDP_FLUSH bit 12")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
