[ Upstream commit 27ee0869d7 ]
Disabling PHYs in runtime usually causes the client with external abort
exception or similar issue due to lack of API to notify clients about PHY
removal. This patch removes the possibility to unbind i.MX PHY drivers in
runtime.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260120111712.3159782-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2ce913452 ]
The problem with the current implementation is that it does not consider
that the USB controller can have multiple PHY handles with different
arguments count, as for example we have in our cn9131 based platform:
"phys = <&cp0_comphy1 0>, <&cp0_utmi0>;".
In such case calling "of_usb_get_dr_mode_by_phy" with -1 (no phy-cells)
leads to not proper phy detection, taking the "marvell,cp110-utmi-phy"
dts definition we can call the "of_usb_get_dr_mode_by_phy" with 0
(#phy-cells = <0>) and safely look for that phy.
Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@belden.com>
Link: https://patch.msgid.link/20260106150643.922110-1-aleksandar.gerasimovski@belden.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d303d37ef5 ]
The module parameter `nowayout` indicates whether the watchdog should ever
be allowed to stop, but the driver currently ignores this option.
Pass the `nowayout` parameter to the watchdog core by setting the
WDOG_NO_WAY_OUT flag accordingly.
Signed-off-by: Oleksandr Suvorov <cryosay@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56d2126766 ]
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log. Since commit ad67b74d24 ("printk: hash
addresses printed with %p") the regular %p has been improved to avoid
this issue. Furthermore, restricted pointers ("%pK") were never meant
to be used through printk(). They can still unintentionally leak raw
pointers or acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through
seq_file, for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260107-restricted-pointers-binder-v1-1-181018bf3812@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b2ab3464 ]
Some products, such as the Ugreen DXP4800 Plus NAS, ship with the it87
wdt enabled by the firmware and a broken BIOS option that does not
allow to change the time or turn it off. As this makes installing
Linux rather difficult, change the it87_wdt to report it running to
the watchdog core.
Signed-off-by: René Rebe <rene@exactco.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5fd8945a4 ]
Clear rx_running flag only after DMA teardown polling completes. In the
previous implementation the flag was being cleared while hardware teardown
was still in progress, creating a mismatch between software state
(flag = 0, "ready") and hardware state (still terminating).
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-3-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 623b07b370 ]
The DMA IRQ handler does not accounts for the overrun(OE) or any other
errors being reported by the IP before triggering a DMA transaction which
leads to the interrupts not being handled resulting into an IRQ storm.
The way to handle OE is to:
1. Reset the RX FIFO.
2. Read the UART_RESUME register, which clears the internal flag
Earlier, the driver issued DMA transations even in case of OE which shouldn't
be done according to the OE handling mechanism mentioned above, as we are
resetting the FIFO's, refer section: "12.1.6.4.8.1.3.6 Overrun During
Receive" [0].
[0] https://www.ti.com/lit/pdf/spruiu1
Signed-off-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260112081829.63049-2-m-shah@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abe850d82c ]
cfg80211_inform_bss_frame() may return NULL on failure. In that case,
the allocated buffer 'buf' is not freed and the function returns early,
leading to potential memory leak.
Fix this by ensuring that 'buf' is freed on both success and failure paths.
Signed-off-by: Diksha Kumari <dikshakdevgan@gmail.com>
Reviewed-by: Mukesh Kumar Chaurasiya <mkchauras@linux.ibm.com>
Link: https://patch.msgid.link/20260113091712.7071-1-dikshakdevgan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cea2a1257a ]
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with status
-ESHUTDOWN but still has active DMA state. If the gadget driver reuses
this request on reconnect without reinitializing it, the stale DMA
state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero
num_mapped_sgs) and attempt to use freed/invalid DMA addresses,
leading to alignment errors and potential memory corruption.
The normal completion path via _hardware_dequeue() properly calls
usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before
returning the request. The _ep_nuke() path must do the same cleanup
to ensure requests are returned in a clean, reusable state.
Fix:
Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror
the cleanup sequence in _hardware_dequeue():
- Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set
- Call sglist_do_debounce() with copy=false if bounce buffer exists
This ensures that when requests are returned due to endpoint shutdown,
they don't retain stale DMA mappings. The 'false' parameter to
sglist_do_debounce() prevents copying data back (appropriate for
shutdown path where transfer was aborted).
Signed-off-by: Mario Peter <mario.peter@leica-geosystems.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://patch.msgid.link/20260108165902.795354-1-mario.peter@leica-geosystems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4c1d0618 ]
When ffs_epfile_ioctl handles FUNCTIONFS_DMABUF_* ioctls, it's currently
falling through when copy_from_user fails.
However, this fallthrough isn't being checked properly, so the handler
continues executing further than it should. It then tries the secondary
dispatch where it ultimately gives up and returns -ENOTTY.
The end result is invalid ioctl invocations will yield a -ENOTTY rather
than an -EFAULT.
It's a common pattern elsewhere in the kernel code to directly return
-EFAULT when copy_from_user fails. So we update ffs_epfile_ioctl to do
the same and fix this issue.
Signed-off-by: Sam Day <me@samcday.com>
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-1-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0145e7acd2 ]
Currently, DMA_FROM_DEVICE is used when attaching DMABUFs to IN
endpoints and DMA_TO_DEVICE for OUT endpoints. This is inverted from
how it should be.
The result is IOMMU read-only mappings placed on OUT queues,
triggering arm-smmu write faults.
Put differently, OUT endpoints flow data from host -> gadget, meaning
the UDC peripheral needs to have write access to the buffer to fill it
with the incoming data.
This commit flips the directions and updates the implicit-sync helpers
so IN endpoints act as readers and OUT endpoints as writers.
Signed-off-by: Sam Day <me@samcday.com>
Tested-by: David Heidelberg <david@ixit.cz> # OnePlus 6T on sdm845-next-20251119
Link: https://patch.msgid.link/20260108-ffs-dmabuf-ioctl-fix-v1-2-e51633891a81@samcday.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b54c82d6cb ]
commit 14374fbb3f ("misc: eeprom_93xx46: Add new 93c56 and 93c66
compatible strings") added support for 93xx56 and 93xx66 eeproms, but
didn't take into account that the write enable/disable + erase all
commands are hardcoded for the 6-bit address of the 93xx46.
This commit fixes the command word generation by increasing the number
of shifts as the address field grows, keeping the command intact.
Also, the check for 8-bit or 16-bit mode is no longer required as this
is already taken into account in the edev->addrlen field.
Signed-off-by: Markus Perkins <markus@notsyncing.net>
Link: https://patch.msgid.link/20251202104823.429869-3-markus@notsyncing.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba75ecb97d ]
In the function bcm_vk_read(), the pointer entry is checked, indicating
that it can be NULL. If entry is NULL and rc is set to -EMSGSIZE, the
following code may cause null-pointer dereferences:
struct vk_msg_blk tmp_msg = entry->to_h_msg[0];
set_msg_id(&tmp_msg, entry->usr_msg_id);
tmp_msg.size = entry->to_h_blks - 1;
To prevent these possible null-pointer dereferences, copy to_h_msg,
usr_msg_id, and to_h_blks from iter into temporary variables, and return
these temporary variables to the application instead of accessing them
through a potentially NULL entry.
Signed-off-by: Tuo Li <islituo@gmail.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Link: https://patch.msgid.link/20251211063637.3987937-1-islituo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 434e1a0ee1 ]
While suspend and resume, parent clock config for refclk was getting lost.
So save and restore it in suspend and resume operations.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Thomas Richard (TI.com) <thomas.richard@bootlin.com>
Link: https://patch.msgid.link/20251216-phy-cadence-torrent-resume-restore-refclk-parent-v3-1-8a7ed84b47e3@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf3bc0265 ]
m2m_hw_period is initialized only when chan_config->m2m_hw is true. This
triggers a warning:
‘m2m_hw_period’ may be used uninitialized [-Wmaybe-uninitialized]
Although m2m_hw_period is only used when chan_config->m2m_hw is true and
ignored otherwise, initialize it unconditionally to 0.
ccr is initialized by stm32_mdma_set_xfer_param() when the sg list is not
empty. This triggers a warning:
‘ccr’ may be used uninitialized [-Wmaybe-uninitialized]
Indeed, it could be used uninitialized if the sg list is empty. Initialize
it to 0.
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251217-mdma_warnings_fix-v2-1-340200e0bb55@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7178c3586a ]
maxburst, as provided by the client, specifies the largest amount of
data that is allowed to be transferred in one burst. This limit is
normally provided to avoid a data burst overflowing the target FIFO.
It does not mean that the DMA engine can only do bursts in that size.
Let the driver pick the largest supported burst length within the
given limit. This lets the driver work correctly with some clients that
give a large maxburst value. In particular, the 8250_dw driver will give
a quarter of the UART's FIFO size as maxburst. On some systems the FIFO
size is 256 bytes, giving a maxburst of 64 bytes, while the hardware
only supports bursts of up to 16 bytes.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221080450.1813479-1-wens@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4c9d8a10 ]
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization.
Acked-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Signed-off-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20251127165337.19172-1-knavaneeth786@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c141c8221b ]
When parsing the region bridge list from the "fpga-bridges" device tree
property, the of-fpga-region driver will silently ignore bridges which fail
to be obtained, for example due to a missing bridge driver or invalid
phandle.
This can lead to hardware issues if a region bridge stays coupled when
partial programming is performed.
Fail if any of the bridges specified in "fpga-bridges" cannot be obtained.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20251127-of-fpga-region-fail-if-bridges-not-found-v1-1-ca674f8d07eb@bootlin.com
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6811e0a08b ]
ucsi_psy_get_voltage_max and ucsi_psy_get_current_max are calculated
using whichever pdo is in the last position of the src_pdos array, presuming
it to be a fixed pdo, so the pdo_fixed_voltage or pdo_max_current
helpers are used on that last pdo.
However, non-Fixed PDOs such as Battery PDOs, Augmented PDOs (used for AVS and
for PPS) may exist, and are always at the end of the array if they do.
In the event one of these more advanced chargers are attached the helpers for
fixed return mangled values.
Here's an example case of a Google Pixel Flex Dual Port 67W USB-C Fast Charger
with PPS support:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=13400000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=5790000
POWER_SUPPLY_CURRENT_NOW=3250000
Voltage Max is reading as 13.4V, but that's an incorrect decode of the PPS
APDO in the last position. Same goes for CURRENT_MAX. 5.79A is incorrect.
Instead, enumerate through the src_pdos and filter just for Fixed PDOs for
now, and find the one with the highest voltage and current respectively.
After, from the same charger:
POWER_SUPPLY_NAME=ucsi-source-psy-cros_ec_ucsi.4.auto2
POWER_SUPPLY_TYPE=USB
POWER_SUPPLY_CHARGE_TYPE=Standard
POWER_SUPPLY_USB_TYPE=C [PD] PD_PPS PD_DRP
POWER_SUPPLY_ONLINE=1
POWER_SUPPLY_VOLTAGE_MIN=5000000
POWER_SUPPLY_VOLTAGE_MAX=20000000
POWER_SUPPLY_VOLTAGE_NOW=20000000
POWER_SUPPLY_CURRENT_MAX=4000000
POWER_SUPPLY_CURRENT_NOW=3250000
Signed-off-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251208174918.289394-3-bleung@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d31228143a ]
Add error checking for clk_prepare_enable() calls in
dw8250_runtime_resume(). Currently if either clock fails to enable,
the function returns success while leaving clocks in inconsistent state.
This change implements comprehensive error handling by checking the return
values of both clk_prepare_enable() calls. If the second clock enable
operation fails after the first clock has already been successfully
enabled, the code now properly cleans up by disabling and unpreparing
the first clock before returning. The error code is then propagated to
the caller, ensuring that clock enable failures are properly reported
rather than being silently ignored.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251104145433.2316165-2-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 618b4aec12 ]
The return value of sdio_alloc_irq() was not stored in status.
If sdio_alloc_irq() fails after rtw_drv_register_netdev() succeeds,
status remains _SUCCESS and the error path skips resource cleanup,
while rtw_drv_init() still returns success.
Store the return value of sdio_alloc_irq() in status and reuse the
existing error handling which relies on status.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Link: https://patch.msgid.link/20251208092730.262499-1-buaajxlj@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87e5575a6 ]
Add cs42l45 to the wake_capable_list because it can generate jack events
whilst the bus is stopped.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215151729.3911077-1-ckeepax@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d41ed4ea4 ]
Without module_platform_driver(), stm32-dma3 doesn't have a
module_exit procedure. Once stm32-dma3 module is inserted, it
can't be removed, marked busy.
Use module_platform_driver() instead of subsys_initcall() to register
(insmod) and unregister (rmmod) stm32-dma3 driver.
Reviewed-by: Eugen Hristev <eugen.hristev@linaro.org>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251121-dma3_improv-v2-1-76a207b13ea6@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 590fe2f46c ]
68000 has different alignment needs to 68020+.
memcpy() checks if the destination is aligned and does a smaller copy
to fix the alignment and then critically for 68000 it checks if the
source is still unaligned and if it is reverts to smaller copies.
memmove() does not currently do the second part and malfunctions if
one of the pointers is aligned and the other isn't.
This is apparently getting triggered by printk. If I put breakpoints
into the new checks added by this commit the first hit looks like this:
memmove (n=205, src=0x2f3971 <printk_shared_pbufs+205>, dest=0x2f3980 <printk_shared_pbufs+220>) at arch/m68k/lib/memmove.c:82
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5df96d141c ]
roclk_get_parent() and sclk_get_parent() has the possibility of
returning -EINVAL, however the framework expects this call to always
succeed since the return value is unsigned.
If there is no parent map defined, then the current value programmed in
the hardware is used. Let's use that same value in the case where
-EINVAL is currently returned.
This index is only used by clk_core_get_parent_by_index(), and it
validates that it doesn't overflow the number of available parents.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512050233.R9hAWsJN-lkp@intel.com/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20251205-clk-microchip-fixes-v3-2-a02190705e47@redhat.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77661d60d ]
If there are any pending messages in the mailbox queue, they are sent
as soon as a TX done event arrives from the driver. This may trigger a
new delivery interrupt while the previous one is still being handled.
If the delivery status is cleared after this, the interrupt is lost.
To prevent this from happening, clear the delivery status immediately
after checking it and before any new messages are sent.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d935187cfb ]
A potential circular locking dependency (ABBA deadlock) exists between
`ec_dev->lock` and the clock framework's `prepare_lock`.
The first order (A -> B) occurs when scp_ipi_send() is called while
`ec_dev->lock` is held (e.g., within cros_ec_cmd_xfer()):
1. cros_ec_cmd_xfer() acquires `ec_dev->lock` and calls scp_ipi_send().
2. scp_ipi_send() calls clk_prepare_enable(), which acquires
`prepare_lock`.
See #0 in the following example calling trace.
(Lock Order: `ec_dev->lock` -> `prepare_lock`)
The reverse order (B -> A) is more complex and has been observed
(learned) by lockdep. It involves the clock prepare operation
triggering power domain changes, which then propagates through sysfs
and power supply uevents, eventually calling back into the ChromeOS EC
driver and attempting to acquire `ec_dev->lock`:
1. Something calls clk_prepare(), which acquires `prepare_lock`. It
then triggers genpd operations like genpd_runtime_resume(), which
takes `&genpd->mlock`.
2. Power domain changes can trigger regulator changes; regulator
changes can then trigger device link changes; device link changes
can then trigger sysfs changes. Eventually, power_supply_uevent()
is called.
3. This leads to calls like cros_usbpd_charger_get_prop(), which calls
cros_ec_cmd_xfer_status(), which then attempts to acquire
`ec_dev->lock`.
See #1 ~ #6 in the following example calling trace.
(Lock Order: `prepare_lock` -> `&genpd->mlock` -> ... -> `&ec_dev->lock`)
Move the clk_prepare()/clk_unprepare() operations for `scp->clk` to the
remoteproc prepare()/unprepare() callbacks. This ensures `prepare_lock`
is only acquired in prepare()/unprepare() callbacks. Since
`ec_dev->lock` is not involved in the callbacks, the dependency loop is
broken.
This means the clock is always "prepared" when the SCP is running. The
prolonged "prepared time" for the clock should be acceptable as SCP is
designed to be a very power efficient processor. The power consumption
impact can be negligible.
A simplified calling trace reported by lockdep:
> -> #6 (&ec_dev->lock)
> cros_ec_cmd_xfer
> cros_ec_cmd_xfer_status
> cros_usbpd_charger_get_port_status
> cros_usbpd_charger_get_prop
> power_supply_get_property
> power_supply_show_property
> power_supply_uevent
> dev_uevent
> uevent_show
> dev_attr_show
> sysfs_kf_seq_show
> kernfs_seq_show
> -> #5 (kn->active#2)
> kernfs_drain
> __kernfs_remove
> kernfs_remove_by_name_ns
> sysfs_remove_file_ns
> device_del
> __device_link_del
> device_links_driver_bound
> -> #4 (device_links_lock)
> device_link_remove
> _regulator_put
> regulator_put
> -> #3 (regulator_list_mutex)
> regulator_lock_dependent
> regulator_disable
> scpsys_power_off
> _genpd_power_off
> genpd_power_off
> -> #2 (&genpd->mlock/1)
> genpd_add_subdomain
> pm_genpd_add_subdomain
> scpsys_add_subdomain
> scpsys_probe
> -> #1 (&genpd->mlock)
> genpd_runtime_resume
> __rpm_callback
> rpm_callback
> rpm_resume
> __pm_runtime_resume
> clk_core_prepare
> clk_prepare
> -> #0 (prepare_lock)
> clk_prepare
> scp_ipi_send
> scp_send_ipi
> mtk_rpmsg_send
> rpmsg_send
> cros_ec_pkt_xfer_rpmsg
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20260112110755.2435899-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75df94d05f ]
To reduce the amount of spurious interrupts, disable the interrupts that
are not handled in this driver.
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673b570825 ]
In current imx-mailbox driver, the MU IRQ is configured with
'IRQF_NO_SUSPEND' flag set. So during linux suspend/resume flow,
the MU IRQ is always enabled. With commit 892cb524ae ("mailbox: imx:
fix wakeup failure from freeze mode"), if the MU IRQ is triggered after
the priv->suspended flag has been set, the system suspend will be
aborted.
On i.MX7ULP platform, certain drivers that depend on rpmsg may need
to send rpmsg request and receive an acknowledgment from the remote
core during the late_suspend stage. Early suspend abort is not
expected, and the i.MX7ULP already has additional hardware and
software to make sure the system can be wakeup from freeze mode
correctly when MU IRQ is trigger.
Skip the 'suspend' flag handling logic on i.MX7ULP to avoid the
early abort when doing suspend.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 673327028c ]
The PCC code currently specifies IRQF_ONESHOT if the interrupt could
potentially be shared but doesn't actually use request_threaded_irq() and
the interrupt handler does not use IRQ_WAKE_THREAD so IRQF_ONESHOT is
never relevant. Since commit aef30c8d56 ("genirq: Warn about using
IRQF_ONESHOT without a threaded handler") specifying it has resulted in a
WARN_ON(), fix this by removing IRQF_ONESHOT.
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d62e0e92e5 ]
Firmwares that do not use mailbox communication (e.g., the hello_world
sample) leave priv->tx_ch as NULL. The current suspend logic
unconditionally sends RP_MBOX_SUSPEND_SYSTEM, which is invalid without
an initialized TX channel.
Detect the no_mailboxes case early and skip sending the suspend
message. Instead, proceed directly to the runtime PM suspend path,
which is the correct behavior for firmwares that cannot respond to
mailbox requests.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20251204122825.756106-1-iuliana.prodan@oss.nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f743435f98 ]
The get_sample() function in the hwlat tracer assumes the caller holds
hwlat_data.lock, but this is not actually happening. The result is
unprotected data access to hwlat_data, and in per-cpu mode can result in
false sharing which may show up as false positive latency events.
The specific case of false sharing observed was primarily between
hwlat_data.sample_width and hwlat_data.count. These are separated by
just 8B and are therefore likely to share a cache line. When one thread
modifies count, the cache line is in a modified state so when other
threads read sample_width in the main latency detection loop, they fetch
the modified cache line. On some systems, the fetch itself may be slow
enough to count as a latency event, which could set up a self
reinforcing cycle of latency events as each event increments count which
then causes more latency events, continuing the cycle.
The other result of the unprotected data access is that hwlat_data.count
can end up with duplicate or missed values, which was observed on some
systems in testing.
Convert hwlat_data.count to atomic64_t so it can be safely modified
without locking, and prevent false sharing by pulling sample_width into
a local variable.
One system this was tested on was a dual socket server with 32 CPUs on
each numa node. With settings of 1us threshold, 1000us width, and
2000us window, this change reduced the number of latency events from
500 per second down to approximately 1 event per minute. Some machines
tested did not exhibit measurable latency from the false sharing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210074810.6328-1-clord@mykolab.com
Signed-off-by: Colin Lord <clord@mykolab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef3ff40346 ]
The vstate in thread_struct is zeroed when the vector context is
initialized. That includes read-only register vlenb, which holds
the vector register length in bytes. Zeroed state persists until
mstatus.VS becomes 'dirty' and a context switch saves the actual
hardware values.
This can expose the zero vlenb value to the user-space in early
debug scenarios, e.g. when ptrace attaches to a traced process
early, before any vector instruction except the first one was
executed.
Fix this by specifying proper vlenb on vector context init.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251214163537.1054292-3-geomatsi@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9672ed3de7 ]
The ufs_mtk_clk_scale() trace event currently stores the address of the
name string directly via __field(const char *, name). This pointer may
become invalid after the module is unloaded, causing page faults when the
trace buffer is subsequently accessed.
This can occur because the MediaTek UFS driver can be configured as a
loadable module (tristate in Kconfig), meaning the name string passed to
the trace event may reside in module memory that becomes invalid after
module unload.
Fix this by using __string() and __assign_str() to copy the string contents
into the ring buffer instead of storing the pointer. This ensures the trace
data remains valid regardless of module state.
This change increases the memory usage for each ftrace entry by a few bytes
(clock names are typically 7-15 characters like "ufs_sel" or
"ufs_sel_max_src") compared to storing an 8-byte pointer.
Note that this change does not affect anything unless all of the following
conditions are met:
- CONFIG_SCSI_UFS_MEDIATEK is enabled
- ftrace tracing is enabled
- The ufs_mtk_clk_scale event is enabled in ftrace
Signed-off-by: Keita Morisaki <keita.morisaki@tier4.jp>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Link: https://patch.msgid.link/20260202024526.122515-1-keita.morisaki@tier4.jp
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5145b27730 ]
Explicitly set non-cached caching attributes for MMIO regions.
Default write-back mode can cause CPU to cache device memory,
causing invalid reads and unpredictable behavior.
Invalid read and write issues were observed on ARM64 when mapping the
notification area to userspace via mmap.
Signed-off-by: Kommula Shiva Shankar <kshankar@marvell.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260102065703.656255-1-kshankar@marvell.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17f0d4cc0 ]
Some randconfig builds run into excessive stack usage with gcc-14 or
higher, which use __attribute__((cold)) where earlier versions did not do
that:
drivers/scsi/BusLogic.c: In function 'blogic_init':
drivers/scsi/BusLogic.c:2398:1: error: the frame size of 1680 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
The problem is that a lot of code gets inlined into blogic_init() here. Two
functions stick out, but they are a bit different:
- blogic_init_probeinfo_list() actually uses a few hundred bytes of kernel
stack, which is a problem in combination with other functions that also
do. Marking this one as noinline means that the stack slots get get
reused between function calls
- blogic_reportconfig() has a few large variables, but whenever it is not
inlined into its caller, the compiler is actually smart enough to reuse
stack slots for these automatically, so marking it as noinline saves
most of the stack space by itself.
The combination of both of these should avoid the problem entirely.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260203163321.2598593-1-arnd@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8be14dd48d ]
After a RAS error occurs on the accelerator device, the accelerator
device will be reset. The live migration state will be abnormal
after reset, and the original state needs to be restored during
the reset process.
Therefore, reset processing needs to be performed in a live
migration scenario.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Link: https://lore.kernel.org/r/20260122020205.2884497-3-liulongfang@huawei.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 151cabd140 ]
When a SATA DAS enclosure is connected behind a Thunderbolt PCIe
switch, hot-unplugging the whole enclosure causes pciehp to tear down
the PCI hierarchy before the SCSI layer issues SYNCHRONIZE CACHE and
START STOP UNIT for the disks.
libata still queues these commands and the AHCI driver tries to access
the HBA registers even though the PCI channel is already offline. This
results in a series of timeouts and error recovery attempts, e.g.:
[ 824.778346] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 891.612720] ata8.00: qc timeout after 5000 msecs (cmd 0xec)
[ 902.876501] ata8.00: qc timeout after 10000 msecs (cmd 0xec)
[ 934.107998] ata8.00: qc timeout after 30000 msecs (cmd 0xec)
[ 936.206431] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 1006.298356] ata1.00: qc timeout after 5000 msecs (cmd 0xec)
[ 1017.561926] ata1.00: qc timeout after 10000 msecs (cmd 0xec)
[ 1048.791790] ata1.00: qc timeout after 30000 msecs (cmd 0xec)
[ 1050.890035] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
With this patch applied, the same hot-unplug looks like:
[ 59.965496] pcieport 0000:00:07.0: pciehp: Slot(14): Link Down
[ 60.002502] sd 7:0:0:0: [sda] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
...
[ 60.103050] sd 0:0:0:0: [sdb] Synchronize Cache(10) failed:
Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
In this test setup with two disks, the hot-unplug sequence shrinks from
about 226 seconds (~3.8 minutes) between the Link Down event and the
last SYNCHRONIZE CACHE failure to under a second. Without this patch the
total delay grows roughly with the number of disks, because each disk
gets its own SYNCHRONIZE CACHE and qc timeout series.
If the underlying PCI device is already gone, these commands cannot
succeed anyway. Avoid issuing them by introducing
ata_adapter_is_online(), which checks pci_channel_offline() for
PCI-based hosts. It is used from ata_scsi_find_dev() to return NULL,
causing the SCSI layer to fail new commands with DID_BAD_TARGET
immediately, and from ata_qc_issue() to bail out before touching the
HBA registers.
Since such failures would otherwise trigger libata error handling,
ata_adapter_is_online() is also consulted from ata_scsi_port_error_handler().
When the adapter is offline, libata skips ap->ops->error_handler(ap) and
completes error handling using the existing path, rather than running
a full EH sequence against a dead adapter.
With this change, SYNCHRONIZE CACHE and START STOP UNIT commands
issued during hot-unplug fail quickly once the PCI channel is offline,
without qc timeout spam or long libata EH delays.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Henry Tseng <henrytseng@qnap.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc29063070 ]
When the connection establishment request is rejected from the server
side, then the actual error number sent back should be used.
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-10-haris.iqbal@ionos.com
Reviewed-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57be33f85e ]
For NXP NCI devices (e.g. PN7150), the interrupt is level-triggered and
active high, not edge-triggered.
Using IRQF_TRIGGER_RISING in the driver can cause interrupts to fail
to trigger correctly.
Remove IRQF_TRIGGER_RISING and rely on the IRQ trigger type configured
via Device Tree.
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://patch.msgid.link/20260205-fc-nxp-nci-remove-interrupt-trigger-type-v2-1-79d2ed4a7e42@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd24173439 ]
While compile testing on less common architectures, I noticed that gcc-10 on
s390 finds a bug that all other configurations seem to miss:
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_set_multicast_list':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:391:25: error: 'cmd.data0' is used uninitialized in this function [-Werror=uninitialized]
391 | buf->data0 = htonl(data->data0);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:25: error: '*((void *)&cmd+4)' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
| ^~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c: In function 'myri10ge_allocate_rings':
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:392:13: error: 'cmd.data1' is used uninitialized in this function [-Werror=uninitialized]
392 | buf->data1 = htonl(data->data1);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data1' was declared here
1939 | struct myri10ge_cmd cmd;
| ^~~
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:393:13: error: 'cmd.data2' is used uninitialized in this function [-Werror=uninitialized]
393 | buf->data2 = htonl(data->data2);
drivers/net/ethernet/myricom/myri10ge/myri10ge.c:1939:22: note: 'cmd.data2' was declared here
1939 | struct myri10ge_cmd cmd;
It would be nice to understand how to make other compilers catch this as
well, but for the moment I'll just shut up the warning by fixing the
undefined behavior in this driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260205162935.2126442-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81a2ce6b6 ]
After asserting Secondary Bus Reset to downstream devices via a GB10 Root
Port, the link may not retrain correctly, e.g., the link may retrain with a
lower lane count or config accesses to downstream devices may fail.
Prevent use of Secondary Bus Reset for devices below GB10.
Signed-off-by: Johnny-CC Chang <Johnny-CC.Chang@mediatek.com>
[bhelgaas: drop pci_ids.h update (only used once), update commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251113084441.2124737-1-Johnny-CC.Chang@mediatek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44d2f70b1f ]
The Qualcomm Hamoa & Glymur Root Ports don't advertise an ACS capability,
but they do provide ACS-like features to disable peer transactions and
validate bus numbers in requests.
Add an ACS quirk for Hamoa & Glymur.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260109-acs_quirk-v1-1-82adf95a89ae@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41e2fb67e ]
Platform, ACPI, or IOMMU drivers call pci_request_acs(), which sets
'pci_acs_enable' to request that ACS be enabled for any devices enumerated
in the future.
OF platforms called pci_enable_acs() for the first device before
of_iommu_configure() called pci_request_acs(), so ACS was never enabled for
that device (typically a Root Port).
Call pci_enable_acs() later, from pci_dma_configure(), after
of_dma_configure() has had a chance to call pci_request_acs().
Here's the call path, showing the move of pci_enable_acs() from
pci_acs_init() to pci_dma_configure(), where it always happens after
pci_request_acs():
pci_device_add
pci_init_capabilities
pci_acs_init
- pci_enable_acs
- if (pci_acs_enable) <-- previous test
- ...
device_add
bus_notify(BUS_NOTIFY_ADD_DEVICE)
iommu_bus_notifier
iommu_probe_device
iommu_init_device
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
of_dma_configure
of_iommu_configure
pci_request_acs
pci_acs_enable = 1 <-- set
+ pci_enable_acs
+ if (pci_acs_enable) <-- new test
+ ...
bus_probe_device
device_initial_probe
...
really_probe
dev->bus->dma_configure
pci_dma_configure # pci_bus_type.dma_configure
...
pci_enable_acs
Note that we will now call pci_enable_acs() twice for every device, first
from the iommu_probe_device() path and again from the really_probe() path.
Presumably that's not an issue since we also call dev->bus->dma_configure()
twice.
For the ACPI platforms, pci_request_acs() is called during ACPI
initialization time itself, independent of the IOMMU framework.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://patch.msgid.link/20260102-pci_acs-v3-1-72280b94d288@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f5e57c622 ]
Like pci_bus_lock(), pci_slot_lock() needs to lock the bridge device to
prevent warnings like:
pcieport 0000:e2:05.0: unlocked secondary bus reset via: pciehp_reset_slot+0x55/0xa0
Take and release the lock for the bridge providing the slot for the
lock/trylock and unlock routines.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260130165953.751063-3-kbusch@meta.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e242d09b58 ]
Correctable and Uncorrectable Error Status Registers on reporting agents
are cleared upon PCI device enumeration in pci_aer_init() to flush past
events. They're cleared again when an error is handled by the AER driver.
If an agent reports a new error after pci_aer_init() and before the AER
driver has probed on the corresponding Root Port or Root Complex Event
Collector, that error is not handled by the AER driver: It clears the
Root Error Status Register on probe, but neglects to re-clear the
Correctable and Uncorrectable Error Status Registers on reporting agents.
The error will eventually be reported when another error occurs. Which
is irritating because to an end user it appears as if the earlier error
has just happened.
Amend the AER driver to clear stale errors on reporting agents upon probe.
Skip reporting agents which have not invoked pci_aer_init() yet to avoid
using an uninitialized pdev->aer_cap. They're recognizable by the error
bits in the Device Control register still being clear.
Reporting agents may execute pci_aer_init() after the AER driver has
probed, particularly when devices are hotplugged or removed/rescanned via
sysfs. For this reason, it continues to be necessary that pci_aer_init()
clears Correctable and Uncorrectable Error Status Registers.
Reported-by: Lucas Van <lucas.van@intel.com> # off-list
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Lucas Van <lucas.van@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/3011c2ed30c11f858e35e29939add754adea7478.1769332702.git.lukas@wunner.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
