commit 2a27f6a8fb upstream
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 interfaces
device to test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel index type in gs_host_frame is u8,
just make canch[] become a flexible array with a u8 index, so it
naturally constraint by U8_MAX and avoid statically allocate 256
pointer for every gs_usb device.
[1]: https://github.com/cherry-embedded/HSCanT-hardware
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5370c31e84 ]
Ensure the TX descriptor type fields are published in a safe order so the
DMA engine never begins processing a descriptor chain before all descriptor
fields are fully initialised.
For multi-descriptor transmits the driver writes DT_FEND into the last
descriptor and DT_FSTART into the first. The DMA engine begins processing
when it observes DT_FSTART. Move the dma_wmb() barrier so it executes
immediately after DT_FEND and immediately before writing DT_FSTART
(and before DT_FSINGLE in the single-descriptor case). This guarantees
that all prior CPU writes to the descriptor memory are visible to the
device before DT_FSTART is seen.
This avoids a situation where compiler/CPU reordering could publish
DT_FSTART ahead of DT_FEND or other descriptor fields, allowing the DMA to
start on a partially initialised chain and causing corrupted transmissions
or TX timeouts. Such a failure was observed on RZ/G2L with an RT kernel as
transmit queue timeouts and device resets.
Fixes: 2f45d1902a ("ravb: minimize TX data copying")
Cc: stable@vger.kernel.org
Co-developed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251017151830.171062-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7e09a052dc ]
R-Car supports gPTP feature whereas RZ/G2L does not support it.
This patch excludes gtp feature support for RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 5370c31e84 ("net: ravb: Enforce descriptor type ordering")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 268eb6fb90 ]
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e297 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit daeb4037ad ]
Check the return value of reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.
Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.
The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling and
diagnostics.
Fixes: acbdad8dd1 ("serial: 8250_dw: simplify optional reset handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251019095131.252848-1-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 295b09128d ]
Slightly simplify ->probe() and drop a few goto labels by using
devm_add_action_or_reset() for clock and reset cleanup.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: daeb4037ad ("serial: 8250_dw: handle reset control deassert error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 434f7349a1 upstream.
Commit 4e65bda827 ("ASoC: wcd934x: fix error handling in
wcd934x_codec_parse_data()") revealed the problem in the slimbus regmap.
That commit breaks audio playback, for instance, on sdm845 Thundercomm
Dragonboard 845c board:
Unable to handle kernel paging request at virtual address ffff8000847cbad4
...
CPU: 5 UID: 0 PID: 776 Comm: aplay Not tainted 6.18.0-rc1-00028-g7ea30958b305 #11 PREEMPT
Hardware name: Thundercomm Dragonboard 845c (DT)
...
Call trace:
slim_xfer_msg+0x24/0x1ac [slimbus] (P)
slim_read+0x48/0x74 [slimbus]
regmap_slimbus_read+0x18/0x24 [regmap_slimbus]
_regmap_raw_read+0xe8/0x174
_regmap_bus_read+0x44/0x80
_regmap_read+0x60/0xd8
_regmap_update_bits+0xf4/0x140
_regmap_select_page+0xa8/0x124
_regmap_raw_write_impl+0x3b8/0x65c
_regmap_bus_raw_write+0x60/0x80
_regmap_write+0x58/0xc0
regmap_write+0x4c/0x80
wcd934x_hw_params+0x494/0x8b8 [snd_soc_wcd934x]
snd_soc_dai_hw_params+0x3c/0x7c [snd_soc_core]
__soc_pcm_hw_params+0x22c/0x634 [snd_soc_core]
dpcm_be_dai_hw_params+0x1d4/0x38c [snd_soc_core]
dpcm_fe_dai_hw_params+0x9c/0x17c [snd_soc_core]
snd_pcm_hw_params+0x124/0x464 [snd_pcm]
snd_pcm_common_ioctl+0x110c/0x1820 [snd_pcm]
snd_pcm_ioctl+0x34/0x4c [snd_pcm]
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xec
el0t_64_sync_handler+0xa0/0xf0
el0t_64_sync+0x198/0x19c
The __devm_regmap_init_slimbus() started to be used instead of
__regmap_init_slimbus() after the commit mentioned above and turns out
the incorrect bus_context pointer (3rd argument) was used in
__devm_regmap_init_slimbus(). It should be just "slimbus" (which is equal
to &slimbus->dev). Correct it. The wcd934x codec seems to be the only or
the first user of devm_regmap_init_slimbus() but we should fix it till
the point where __devm_regmap_init_slimbus() was introduced therefore
two "Fixes" tags.
While at this, also correct the same argument in __regmap_init_slimbus().
Fixes: 4e65bda827 ("ASoC: wcd934x: fix error handling in wcd934x_codec_parse_data()")
Fixes: 7d6f7fb053 ("regmap: add SLIMbus support")
Cc: stable@vger.kernel.org
Cc: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: Steev Klimaszewski <steev@kali.org>
Cc: Srinivas Kandagatla <srini@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251022201013.1740211-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12a1c9353c upstream.
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 501672e3c1 ]
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07a13f913c ]
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 238d468d3e ]
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03ca7c8c42 ]
Currently, in hclge_mii_ioctl(), the operation to
read the PHY register (SIOCGMIIREG) always returns 0.
This patch changes the return type of hclge_read_phy_reg(),
returning an error code when the function fails.
Fixes: 024712f51e ("net: hns3: add ioctl support for imp-controlled PHYs")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251023131338.2642520-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a042beac6e ]
The current logic uses the flush sequence from the current address
space. This is harmless when deducing the flush requirements for the
current submit, as either the incoming address space is the same one
as the currently active one or we switch context, in which case the
flush is unconditional.
However, this sequence is also stored as the current flush sequence
of the GPU. If we switch context the stored flush sequence will no
longer belong to the currently active address space. This incoherency
can then cause missed flushes, resulting in translation errors.
Fixes: 27b67278e0 ("drm/etnaviv: rework MMU handling")
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Link: https://lore.kernel.org/r/20251021093723.3887980-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 420c84c330 ]
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e53 ("usbnet: Fix linkwatch use-after-free on disconnect")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cc31d7940 ]
Refactor PT_REGS macros definitions in bpf_tracing.h to avoid excessive
duplication. We currently have classic PT_REGS_xxx() and CO-RE-enabled
PT_REGS_xxx_CORE(). We are about to add also _SYSCALL variants, which
would require excessive copying of all the per-architecture definitions.
Instead, separate architecture-specific field/register names from the
final macro that utilize them. That way for upcoming _SYSCALL variants
we'll be able to just define x86_64 exception and otherwise have one
common set of _SYSCALL macro definitions common for all architectures.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20211222213924.1869758-1-andrii@kernel.org
Stable-dep-of: 7221b9caf8 ("libbpf: Fix powerpc's stack register definition in bpf_tracing.h")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 881a9c9cb7 ]
The failure of this check only results in a security mitigation being
applied, slightly affecting performance of the compiled BPF program. It
doesn't result in a failed syscall, an thus auditing a failed LSM
permission check for it is unwanted. For example with SELinux, it causes
a denial to be reported for confined processes running as root, which
tends to be flagged as a problem to be fixed in the policy. Yet
dontauditing or allowing CAP_SYS_ADMIN to the domain may not be
desirable, as it would allow/silence also other checks - either going
against the principle of least privilege or making debugging potentially
harder.
Fix it by changing it from capable() to ns_capable_noaudit(), which
instructs the LSMs to not audit the resulting denials.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2369326
Fixes: d4e89d212d ("x86/bpf: Call branch history clearing sequence on exit")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20251021122758.2659513-1-omosnace@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7963891f7c ]
Since the requesttype has USB_DIR_OUT the pipe should be
constructed with usb_sndctrlpipe().
Fixes: 8dc5efe3d1 ("ALSA: usb-audio: Add support for Presonus Studio 1810c")
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Link: https://patch.msgid.link/aPPL3tBFE_oU-JHv@ark
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4789aac9d ]
Current parser logic for GMU firmware assumes a dword aligned payload
size for every block. This is not true for all GMU firmwares. So, fix
this by using correct 'size' value in the calculation for the offset
for the next block's header.
Fixes: c6ed04f856 ("drm/msm/a6xx: A640/A650 GMU firmware path")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/674040/
Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e9c1da4ee ]
ath10k_wmi_cmd_send takes ownership of the passed buffer (skb) and has the
responsibility to release it in case of error. This patch fixes missing
free in case of early error due to unhandled WMI command ID.
Tested-on: WCN3990 hw1.0 WLAN.HL.3.3.7.c2-00931-QCAHLSWMTPLZ-1
Fixes: 553215592f ("ath10k: warn if give WMI command is not supported")
Suggested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250926195656.187970-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fdbb53d318 upstream.
For some reason we ended up kfree between spinlock lock and unlock,
which can sleep.
move the kfree out of spinlock section.
Fixes: a2a5d30218 ("ASoC: qdsp6: q6asm: Add support to memory map and unmap")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251017085307.4325-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a824084b98 upstream.
Since commit 72377ab2d6 ("mptcp: more conservative check for zero
probes") the MPTCP-level zero window probe check is always disabled, as
the TCP-level write queue always contains at least the newly allocated
skb.
Refine the relevant check tacking in account that the above condition
and that such skb can have zero length.
Fixes: 72377ab2d6 ("mptcp: more conservative check for zero probes")
Cc: stable@vger.kernel.org
Reported-by: Geliang Tang <geliang@kernel.org>
Closes: https://lore.kernel.org/d0a814c364e744ca6b836ccd5b6e9146882e8d42.camel@kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-3-38ffff5a9ec8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb53368f8d upstream.
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Found via static analysis.
Fixes: cc5d0189b9 ("[PATCH] powerpc: Remove device_node addrs/n_addr")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f566c0ac5 upstream.
Commit e24cca19ba ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3776c685eb upstream.
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
Cc: stable@vger.kernel.org
Fixes: 18e2f61db3 ("brcmfmac: P2P action frame tx")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com
[Cc stable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18c4ef4e76 upstream.
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot.
Reported-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=793cf822d213be1a74f2
Tested-by: syzbot+793cf822d213be1a74f2@syzkaller.appspotmail.com
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8f067aa594 upstream.
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
Fixes: 8ab58e8e7e ("ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Yuhao Jiang <danisjiang@gmail.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
[ rjw: Changelog edit ]
Link: https://patch.msgid.link/20251022200704.2655507-1-danisjiang@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7073c7fc8d upstream.
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
[ 61.470088] atyfb 0000:03:05.0: enabling device (0080 -> 0083)
[ 61.476191] atyfb: using auxiliary register aperture
[ 61.481239] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x27]
[ 61.487569] atyfb: 512K SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
[ 61.496112] atyfb: Unsupported xclk source: 5.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc89548c69 upstream.
The code did not check the return value of usbnet_get_endpoints.
Add checks and return the error if it fails to transfer the error.
Found via static anlaysis and this is similar to
commit 07161b2416 ("sr9800: Add check for usbnet_get_endpoints").
Fixes: 933a27d39e ("USB: asix - Add AX88178 support and many other changes")
Fixes: 2e55cc7210 ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20251026164318.57624-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abb1f08a21 upstream.
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test.
Fixes: 15a8b55dbb ("nfsd: call op_release, even when op_func returns an error")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 45c222468d ]
After setting the BTRFS_ROOT_FORCE_COW flag on the root we are doing a
full write barrier, smp_wmb(), but we don't need to, all we need is a
smp_mb__after_atomic(). The use of the smp_wmb() is from the old days
when we didn't use a bit and used instead an int field in the root to
signal if cow is forced. After the int field was changed to a bit in
the root's state (flags field), we forgot to update the memory barrier
in create_pending_snapshot() to smp_mb__after_atomic(), but we did the
change in commit_fs_roots() after clearing BTRFS_ROOT_FORCE_COW. That
happened in commit 27cdeb7096 ("Btrfs: use bitfield instead of integer
data type for the some variants in btrfs_root"). On the reader side, in
should_cow_block(), we also use the counterpart smp_mb__before_atomic()
which generates further confusion.
So change the smp_wmb() to smp_mb__after_atomic(). In fact we don't
even need any barrier at all since create_pending_snapshot() is called
in the critical section of a transaction commit and therefore no one
can concurrently join/attach the transaction, or start a new one, until
the transaction is unblocked. By the time someone starts a new transaction
and enters should_cow_block(), a lot of implicit memory barriers already
took place by having acquired several locks such as fs_info->trans_lock
and extent buffer locks on the root node at least. Nevertlheless, for
consistency use smp_mb__after_atomic() after setting the force cow bit
in create_pending_snapshot().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f5b8095ea ]
Currently we have this odd behaviour:
1) At btrfs_replay_log() we drop the reference of the log root tree if
the call to btrfs_recover_log_trees() failed;
2) But if the call to btrfs_recover_log_trees() did not fail, we don't
drop the reference in btrfs_replay_log() - we expect that
btrfs_recover_log_trees() does it in case it returns success.
Let's simplify this and make btrfs_replay_log() always drop the reference
on the log root tree, not only this simplifies code as it's what makes
sense since it's btrfs_replay_log() who grabbed the reference in the first
place.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7f3dfb829 ]
Replace max_t() followed by min_t() with a single clamp().
As was pointed by David Laight in
https://lore.kernel.org/linux-btrfs/20250906122458.75dfc8f0@pumpkin/
the calculation may overflow u32 when the input value is too large, so
clamp_t() is not used. In practice the expected values are in range of
megabytes to gigabytes (throughput limit) so the bug would not happen.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
[ Use clamp() and add explanation. ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1cc1baef6 ]
The LFENCE retpoline mitigation is not secure but the kernel prints
inconsistent messages about this fact. The dmesg log says 'Mitigation:
LFENCE', implying the system is mitigated. But sysfs reports 'Vulnerable:
LFENCE' implying the system (correctly) is not mitigated.
Fix this by printing a consistent 'Vulnerable: LFENCE' string everywhere
when this mitigation is selected.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250915134706.3201818-1-david.kaplan@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit dd831ac822 upstream.
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c93637e6a4 upstream.
Avoid large backtrace, it is sufficient to warn the user that there has
been a link problem. Either the link has failed and the system is in need
of maintenance, or the link continues to work and user has been informed.
The message from the warning can be looked up in the sources.
This makes an actual link issue less verbose.
First of all, this controller has a limitation in that the controller
driver has to assist the hardware with transition to L1 link state by
writing L1IATN to PMCTRL register, the L1 and L0 link state switching
is not fully automatic on this controller.
In case of an ASMedia ASM1062 PCIe SATA controller which does not support
ASPM, on entry to suspend or during platform pm_test, the SATA controller
enters D3hot state and the link enters L1 state. If the SATA controller
wakes up before rcar_pcie_wakeup() was called and returns to D0, the link
returns to L0 before the controller driver even started its transition to
L1 link state. At this point, the SATA controller did send an PM_ENTER_L1
DLLP to the PCIe controller and the PCIe controller received it, and the
PCIe controller did set PMSR PMEL1RX bit.
Once rcar_pcie_wakeup() is called, if the link is already back in L0 state
and PMEL1RX bit is set, the controller driver has no way to determine if
it should perform the link transition to L1 state, or treat the link as if
it is in L0 state. Currently the driver attempts to perform the transition
to L1 link state unconditionally, which in this specific case fails with a
PMSR L1FAEG poll timeout, however the link still works as it is already
back in L0 state.
Reduce this warning verbosity. In case the link is really broken, the
rcar_pcie_config_access() would fail, otherwise it will succeed and any
system with this controller and ASM1062 can suspend without generating
a backtrace.
Fixes: 84b5761462 ("PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access()")
Link: https://lore.kernel.org/linux-pci/20240511235513.77301-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b22f62724 upstream.
When bulk delete command is received in the rtnetlink_rcv_msg function,
if bulk delete is not supported, module_put is not called to release
the reference counting. As a result, module reference count is leaked.
Fixes: a6cec0bcd3 ("net: rtnetlink: add bulk delete support flag")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220815024629.240367-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47b2116e54 ]
After an bind/unbind cycle, the acm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
gs_free_req+0x30/0x44
acm_bind+0x1b8/0x1f4
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 1f1ba11b64 ("usb gadget: issue notifications from ACM function")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-4-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 75a5b8d4dd ]
After an bind/unbind cycle, the ncm->notify_req is left stale. If a
subsequent bind fails, the unified error label attempts to free this
stale request, leading to a NULL pointer dereference when accessing
ep->ops->free_request.
Refactor the error handling in the bind path to use the __free()
automatic cleanup mechanism.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
Call trace:
usb_ep_free_request+0x2c/0xec
ncm_bind+0x39c/0x3dc
usb_add_function+0xcc/0x1f0
configfs_composite_bind+0x468/0x588
gadget_bind_driver+0x104/0x270
really_probe+0x190/0x374
__driver_probe_device+0xa0/0x12c
driver_probe_device+0x3c/0x218
__device_attach_driver+0x14c/0x188
bus_for_each_drv+0x10c/0x168
__device_attach+0xfc/0x198
device_initial_probe+0x14/0x24
bus_probe_device+0x94/0x11c
device_add+0x268/0x48c
usb_add_gadget+0x198/0x28c
dwc3_gadget_init+0x700/0x858
__dwc3_set_mode+0x3cc/0x664
process_scheduled_works+0x1d8/0x488
worker_thread+0x244/0x334
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: stable@kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-3-4997bf277548@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 201c53c687 ]
Introduce the free_usb_request() function that frees both the request's
buffer and the request itself.
This function serves as the cleanup callback for DEFINE_FREE() to enable
automatic, scope-based cleanup for usb_request pointers.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-2-4997bf277548@google.com
Stable-dep-of: 75a5b8d4dd ("usb: gadget: f_ncm: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfb1d99d96 ]
Gadget function drivers often have goto-based error handling in their
bind paths, which can be bug-prone. Refactoring these paths to use
__free() scope-based cleanup is desirable, but currently blocked.
The blocker is that usb_ep_free_request(ep, req) requires two
parameters, while the __free() mechanism can only pass a pointer to the
request itself.
Store an endpoint pointer in the struct usb_request. The pointer is
populated centrally in usb_ep_alloc_request() on every successful
allocation, making the request object self-contained.
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250916-ready-v1-1-4997bf277548@google.com
Stable-dep-of: 75a5b8d4dd ("usb: gadget: f_ncm: Refactor bind path to use __free()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2eead19334 ]
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
Cc: stable <stable@kernel.org>
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: b8fe128dad ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 630785bfbe ]
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13
Fixes: 92cf7d3638 ("xfs: Skip repetitive warnings about mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Update existing xfs_fs_warn_deprecated() callers ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 42f9c66a6d ]
Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is
sufficient for pci-epf-test to not allocate backing memory and to not call
set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not
mean that the BAR gets disabled.
The host side driver, pci_endpoint_test, simply does an ioremap for all
enabled BARs and will run tests against all enabled BARs, so it will run
tests against the BARs marked as BAR_RESERVED.
After running the BAR tests (which will write to all enabled BARs), the
inbound address translation is broken. This is because the tegra controller
exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the
inbound address translation settings get overwritten.
To avoid this, implement the dw_pcie_ep_ops .init() callback and start off
by disabling all BARs (pci-epf-test will later enable/configure BARs that
are not defined as BAR_RESERVED).
This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6,
layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep.
With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which
was specifically made to detect address translation issues) passes.
Fixes: c57247f940 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-7-cassel@kernel.org
[ changed dw_pcie_ep_ops .init to .ep_init and exported dw_pcie_ep_reset_bar ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0a8f173d9d ]
The pmsr_lock spinlock used to be necessary to synchronize access to the
PMSR register, because that access could have been triggered from either
config space access in rcar_pcie_config_access() or an exception handler
rcar_pcie_aarch32_abort_handler().
The rcar_pcie_aarch32_abort_handler() case is no longer applicable since
commit 6e36203bc1 ("PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read
which triggered an exception"), which performs more accurate, controlled
invocation of the exception, and a fixup.
This leaves rcar_pcie_config_access() as the only call site from which
rcar_pcie_wakeup() is called. The rcar_pcie_config_access() can only be
called from the controller struct pci_ops .read and .write callbacks,
and those are serialized in drivers/pci/access.c using raw spinlock
'pci_lock' . It should be noted that CONFIG_PCI_LOCKLESS_CONFIG is never
set on this platform.
Since the 'pci_lock' is a raw spinlock , and the 'pmsr_lock' is not a
raw spinlock, this constellation triggers 'BUG: Invalid wait context'
with CONFIG_PROVE_RAW_LOCK_NESTING=y .
Remove the pmsr_lock to fix the locking.
Fixes: a115b1bd3a ("PCI: rcar: Add L1 link state fix into data abort hook")
Reported-by: Duy Nguyen <duy.nguyen.rh@renesas.com>
Reported-by: Thuan Nguyen <thuan.nguyen-hong@banvien.com.vn>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250909162707.13927-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
